Related
Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?
PeterSvendsen said:
Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?
Click to expand...
Click to collapse
You need to provide more details for folks around here to reply. Ie:
1. Which model are you using - LEO512 or LEO1024
2. Which MAGLDR was flashed. Version 1.13? Because earlier version had the freeze at GOGOGO! problem.
3. Which android build did you use (DAF build type or CWR type?)
Only then we can even start to suggest what to do to help you
Wait....Are you using builds that requires SDCards to be partitioned? If yes, did you partition as required?
PeterSvendsen said:
Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?
Click to expand...
Click to collapse
Mate,
I experience that too. I think not all ROM can be successfully boot.
My suggestions is either try reflashing or find another ROM that works for your HD2.
Cheers
silverwind said:
Mate,
I experience that too. I think not all ROM can be successfully boot.
My suggestions is either try reflashing or find another ROM that works for your HD2.
Cheers
Click to expand...
Click to collapse
Thats odd.... I only know that the experience may vary across different units (ie: wake-up lag, power drain, etc). Never have i heard that not all builds can be successfully booted. I still think the problems has to do with settings (i.e.: config.txt, NAND partition layout, SD Card partition size and formats etc).
If you have a prob with the builds, please specify clearly which version and your configurations. Only then folks here can advice accordingly....
can't hurt...
task 29, WM6.5 rom installation, magdlr installation then flash the rom again
make shure you created ext partition on SD if required for making work the ROM (check its trhead)....
Do a fresh installation(Format SD->Task 29->Flash Radio->Flash MAGLDR->Flash CWM->Flash ROM from zip using AD recovery option in MAGLDR.. Maybe you are using an incompatible radio?
if i have this problem, i flash windows back (LEOIMG.nbh is always on my sdcard).
this will help me.
after one "no-function"-flash dont try an other flash by the same config like the config before.
I think that problem is in kernel . you trying kernel for new desire, use for N1.
tidus18 said:
You need to provide more details for folks around here to reply. Ie:
1. Which model are you using - LEO512 or LEO1024
2. Which MAGLDR was flashed. Version 1.13? Because earlier version had the freeze at GOGOGO! problem.
3. Which android build did you use (DAF build type or CWR type?)
Only then we can even start to suggest what to do to help you
Wait....Are you using builds that requires SDCards to be partitioned? If yes, did you partition as required?
Click to expand...
Click to collapse
Hi
I have no idea if it is a 1024 or 512! How do I find out?
I use MAGLDR 1.13
I have tried to install
RAFDROID HD 4.0.2|Fastest Full DesHD|DATA2EXT|[Rafpigna 1.8 OC]
[LEO512][LEO1024]CMYLXGOs Stock Desire HD(2)[RUU1.84][RAFPIGNA 1.9OC]
and more
All with same result
I have tried to do the sd partition... .actually with 2 diffent cards but I have never been able to have 2 partitions.... I alway ends up with 1 partition on 2Gb
---
Do a fresh installation(Format SD->Task 29->Flash Radio->Flash MAGLDR->Flash CWM->Flash ROM from zip using AD recovery option in MAGLDR.. Maybe you are using an incompatible radio?
---
I tried that as well with same results
Do you recomment a specific android?
I'm totally new in this and only want a android on my phone )
tidus18 said:
Thats odd.... I only know that the experience may vary across different units (ie: wake-up lag, power drain, etc). Never have i heard that not all builds can be successfully booted. I still think the problems has to do with settings (i.e.: config.txt, NAND partition layout, SD Card partition size and formats etc).
If you have a prob with the builds, please specify clearly which version and your configurations. Only then folks here can advice accordingly....
Click to expand...
Click to collapse
I m trying to say that so many ROMs are available here.
Dont spend your time to long only to one ROM
Unless it is your favorite ROM (Chef)
Cheers...
i guess you did a ROM flash through clockworkmod? if so, did you flash the correct partition sizes (sense roms need often about 400mb /system partition). If not you need to find the 400mb clockwork recovery in this forum.
If you flashed a rom via DAF, please disregard this.
also please post in the correct forum (Q and A would be correct for this topic i believe)
joshman99 said:
i guess you did a ROM flash through clockworkmod? if so, did you flash the correct partition sizes (sense roms need often about 400mb /system partition). If not you need to find the 400mb clockwork recovery in this forum.
If you flashed a rom via DAF, please disregard this.
also please post in the correct forum (Q and A would be correct for this topic i believe)
Click to expand...
Click to collapse
Hi
I have tried to do it by DAF (reports size to big?!) and clockworkmod I have also tried with
Sorry about the trong forum, you're absolutly correct...
Update
I have now bought a new sd micro card to make a correct partition.. but I experience exactly the same... error I cant..
With program do you recomment?
PeterSvendsen said:
Hi
I have tried to do it by DAF (reports size to big?!) and clockworkmod I have also tried with
Sorry about the trong forum, you're absolutly correct...
Update
I have now bought a new sd micro card to make a correct partition.. but I experience exactly the same... error I cant..
With program do you recomment?
Click to expand...
Click to collapse
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition
shhbz said:
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition
Click to expand...
Click to collapse
use panasnic sd fromatter and frmat
http://forum.xda-developers.com/showthread.php?t=905089
or use mini partition tool
cwm is the best method to install android rom
sorry wrong quote
shhbz said:
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition
Click to expand...
Click to collapse
I have done a task29 several times already.
---
.... or rather t mobile on top of ur screen
---
I'm not sure what you ask me about. But no on my phone my call buttons is black and gray
By using panasonic formatter I only format... but the card is on 8Gb so guess I need to make a partition.
Mini partition tool doesnt work correct it report errors as soon as I ftry to format etx3
If your phone has T-mobile on top and buttons are colored red & grees - its LEO1024.
If all grey without any logo on its case/housing - then its LEO512/EURO model.
difference is the NAND size. LEO1024 has 1GB and LEO512 has 512MB.
Peter,
I'll quickly write the outline here, hopefully it helps. But detailed guide on each subject has been posted numerous times here. Please look for them.
Outline to get RAFDROID up and running (Based on your post, im assuming yours is LEO512)
1. Flash MAGLDR 1.13 (this involves entering tricolor screen and flashing like good'ol WM6.5)
2. From MAGLDR, choose USB Flasher mode (Option 4 i think...) and flash Clockwork Mod Recovery with 400MB layout. (this is important, wrong layout will cause bootloop and androd will not boot)
3. Assuming you have 2GB microSD card - Use a memcard reader and connect it to your PC. Dont use mass-storage option from MAGLDR. Launch Minitool Partition and create 1GB FAT32 Primary partiton followed by 1GB EXT3 with 4096 block size primary partition. This process is not as complicated as it may sound
4. Put the downloaded RAFDROID CWR zip file into the FAT32 partition. (When the partitioning is complete, windows will only see 1GB in your microSD. The 2nd 1GB EXT3 partition will only be available to android, so dont worry about it)
5.Once done, pop you microsd in your LEO, and choose Recovery option from menu. Once you enter the recovery menu, choose Install from ZIP file and choose the RAFDROID zip file that you have just put in.
6. Wait, and choose reboot. Whole process should be about 20 min.
7. Enjoy your android
Guys, please add anything if i missed out any steps
PeterSvendsen said:
I have done a task29 several times already.
---
.... or rather t mobile on top of ur screen
---
I'm not sure what you ask me about. But no on my phone my call buttons is black and gray
By using panasonic formatter I only format... but the card is on 8Gb so guess I need to make a partition.
Mini partition tool doesnt work correct it report errors as soon as I ftry to format etx3
Click to expand...
Click to collapse
ok if u have performed task 29
install stock rom having spl 2.08 or less
install hspl 2.08
install malgdr 1.13
install cwm depending on the rom u want to use (it must be mention in the thread which one to go for)
transfer the zip file from pc to mmc card by mounting the card orelse use card reader to transfer the files
go into malgdr option and install from zip
note:create 1024 ext3 or ext4 leaving the rest in fat format
http://forum.xda-developers.com/showthread.php?t=905089 (the best way to parttition)
or http://forum.xda-developers.com/showthread.php?t=910000
or http://forum.xda-developers.com/showthread.php?t=905145
or http://www.youtube.com/watch?v=9d7qhBpCJQc&feature=player_embedded
this is the best method to format your card in order of your requirement
do these steps of formating before instaling cwm or before doing any other steps
and 1 more thing u have a 512 leo euro hd 2 so read these guides here
http://forum.xda-developers.com/showthread.php?t=609477
u wil get all information for stock rom /correct radio and every stuff in the above thread
hope your probelem gets solved this time if u need any more help let me know
remeber if you have hspl 3.03 u cant install android so use stock rom with spl 2.08 and install hspl 2.08 later
i wouls suggest to use hyperdroid http://forum.xda-developers.com/showthread.php?t=918899 as its the best after MDJ built
great battery,speed,smooth,etc no errors but if you want to try froyo built than you are checking the right thread
hi
I have been trying to install the new android system that was just recently posted on hd2 apps..i have install hspl on my phone, formated my sd card, updated my radio to 2.15, and still nothing. i have installed the android launcher into the sd card and then to the main phone memory and still nothing, every time i start the installation process for the droid on my htc hd2 it stays on the htc green logo. and yes i did but the android folder on the root of my sd card after extracting it using 7zip....i have also tried doing the installation without my sims card in and still nothing..i dont know what else to do can someone please assist me with this, i dont know what else to do.
nani
narani2 said:
hi
I have been trying to install the new android system that was just recently posted on hd2 apps..i have install hspl on my phone, formated my sd card, updated my radio to 2.15, and still nothing. i have installed the android launcher into the sd card and then to the main phone memory and still nothing, every time i start the installation process for the droid on my htc hd2 it stays on the htc green logo. and yes i did but the android folder on the root of my sd card after extracting it using 7zip....i have also tried doing the installation without my sims card in and still nothing..i dont know what else to do can someone please assist me with this, i dont know what else to do.
nani
Click to expand...
Click to collapse
what medium are your using? is it SD install? Mgcldr, or clK?
narani2 said:
hi
I have been trying to install the new android system that was just recently posted on hd2 apps..i have install hspl on my phone, formated my sd card, updated my radio to 2.15, and still nothing. i have installed the android launcher into the sd card and then to the main phone memory and still nothing, every time i start the installation process for the droid on my htc hd2 it stays on the htc green logo. and yes i did but the android folder on the root of my sd card after extracting it using 7zip....i have also tried doing the installation without my sims card in and still nothing..i dont know what else to do can someone please assist me with this, i dont know what else to do.
nani
Click to expand...
Click to collapse
Dear confused Nani,
1. What android build r u trying to install...post links to the thread.
2. Did u follow proper instructions posted by the build dev?
3. It appears u want 2 install android via SD method, so what windows ROM r u currently using? or would u like to install Android on main memory (NAND)?
Remember, More info is always better...
voncrane said:
Dear confused Nani,
1. What android build r u trying to install...post links to the thread.
2. Did u follow proper instructions posted by the build dev?
3. It appears u want 2 install android via SD method, so what windows ROM r u currently using? or would u like to install Android on main memory (NAND)?
Remember, More info is always better...
Click to expand...
Click to collapse
Hi,
sorry, i was trying to install the android via sd card. and the windows rom that i an currently using is version 2.13.531.1,..what can i do to fix this problem..
narani2 said:
Hi,
sorry, i was trying to install the android via sd card. and the windows rom that i an currently using is version 2.13.531.1,..what can i do to fix this problem..
Click to expand...
Click to collapse
oh and i did follow the instructions exactly as it was posted and still not luck.
narani2 said:
oh and i did follow the instructions exactly as it was posted and still not luck.
Click to expand...
Click to collapse
Dear confused nani,
SD android was so yesterday, wouldn't you want to have hd2 boot straight into android like how window os? It's called NAND android. Unless you like window 6.5 os or dual os then you should gone SD android. I'm throwing this out there just in case you don't know. If you decided to go NAND, follow my sig for the best pure latest android.
hi capt pp
i want to have my options open n b able to still have access to windows.thats why i would prefer via sd card. buf if u can, can u help me with this..i will greatly appreciate if u or anyone can help me with this.
thanx
narani2 said:
hi capt pp
i want to have my options open n b able to still have access to windows.thats why i would prefer via sd card. buf if u can, can u help me with this..i will greatly appreciate if u or anyone can help me with this.
thanx
Click to expand...
Click to collapse
Is this 2.13 TMOUS Stock ROM?
I would suggest you to use Custom ROM that is compatible with SD Android. You can try Platinum Series by Laurentius26 (find the link in WM 6.5 ROM Development forum!). I used this rom for dual boot with SD Android (American Android AOSP)
To do that, you have to install HSPL 4 and Choose SPL 2.08 HSPL.
Do Task 29.
Flash a Custom ROM.and do HARD RESET. Let it fully boot and do Soft REset.
Place your SD Android Folder to the ROOT of your FORMATTED Micro SD Card.
Remember that the name of the folder must be "Android" (without quote). Few SD Android ROM has different folder name, so you might need to rename it.
Now within Android ROM folder, tap CLRCAD and tap HARET
It will boot to ANdroid. Keep in mind it will take around 20 Minutes. Be patient
If you still have a problem or need more detail, you can PM me
Good luck
silverwind said:
Is this 2.13 TMOUS Stock ROM?
I would suggest you to use Custom ROM that is compatible with SD Android. You can try Platinum Series by Laurentius26 (find the link in WM 6.5 ROM Development forum!). I used this rom for dual boot with SD Android (American Android AOSP)
To do that, you have to install HSPL 4 and Choose SPL 2.08 HSPL.
Do Task 29.
Flash a Custom ROM.and do HARD RESET. Let it fully boot and do Soft REset.
Place your SD Android Folder to the ROOT of your FORMATTED Micro SD Card.
Remember that the name of the folder must be "Android" (without quote). Few SD Android ROM has different folder name, so you might need to rename it.
Now within Android ROM folder, tap CLRCAD and tap HARET
It will boot to ANdroid. Keep in mind it will take around 20 Minutes. Be patient
If you still have a problem or need more detail, you can PM me
Good luck
Click to expand...
Click to collapse
yes its a 2.13 tmo usa stock rom...i will try this i just hope it works. thanx silverwind
first of all you needn't do a hspl to run an android sd build. first choose a build from the android sd build threads. i can suggest americandroid if 'sense' isn't so important for you. After you download the rom,unzip and find android folder in it. copy it to your hd2. tap clrcad then haret. first boot may take up to half an hour.
narani2 said:
yes its a 2.13 tmo usa stock rom...i will try this i just hope it works. thanx silverwind
Click to expand...
Click to collapse
try: http://forum.xda-developers.com/showthread.php?t=981811
[04 MAR][MAGLDR/CWM][AUTO-INSTALL] EASY INSTALL OF MAGLDR And ClockworkMod Recovery!
hi mutil,
american droid is the one that i have been trying to install via sd card.i did hspl 2.08,changed radio to 2.15 and rom to platinum series..i was finally able to load droid but now i do not have internet service.so i just booted back up to platinum series where my internet service actually works.
Okay I have everything right here for the SD Android installation
ROM 3.14
2.15 Radio
HSPL 2.08
A properly fat32 formatted SD card
But no matter which SD build I try after hitting the Haret, it takes me to several lines and then to a htc screen and stays there forever.. Tried the Americandroid MccM BoxMax and the mixtheme build...
And Im sorry if this has been questioned in the earlier forums but I couldn't really see someone else having this problem, so sorry :/
But please Help
ty
cookymonster1 said:
Okay I have everything right here for the SD Android installation
ROM 3.14
2.15 Radio
HSPL 2.08
A properly fat32 formatted SD card
But no matter which SD build I try after hitting the Haret, it takes me to several lines and then to a htc screen and stays there forever.. Tried the Americandroid MccM BoxMax and the mixtheme build...
And Im sorry if this has been questioned in the earlier forums but I couldn't really see someone else having this problem, so sorry :/
But please Help
ty
Click to expand...
Click to collapse
Are you putting the Android folder in the root of the sd card? How much time are you Waiting ..first boot should take 5 or 6 minutes at least ..try another sd card too ..
Sent from my HTC HD2 using XDA App
did u run the clrcad.exe?
yugoport said:
Are you putting the Android folder in the root of the sd card? How much time are you Waiting ..first boot should take 5 or 6 minutes at least ..try another sd card too ..
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
by root of SD you mean; after formatting i just place it in the storage card directory right ? yes im doing that and i have a standard 4gb SD card
chalienge said:
did u run the clrcad.exe?
Click to expand...
Click to collapse
Yes Sir I am running the clrcad.exe first and then The Haret file plus Im waiting almost 2hours each time =/
format sd
put the folder 'Android'- not only its content but the folder itself to sd
clrcad
haret.
if it doesnt boot then hard reset phone and then do all the steps above again
Also,, regular hd2 or tmous? (I ask because 3.14 rom and 2.08.hspl on a regular don't mix, messes with the ram).
Also, for SD android the hspl and radio rules don't matter in the way they do for nand android.
As an aside, I only once got any haret based rom to load in a dozen or so attempts, and it immediately prevented the winmo rom from starting, forcing a hard reset.
mutil said:
format sd
put the folder 'Android'- not only its content but the folder itself to sd
clrcad
haret.
if it doesnt boot then hard reset phone and then do all the steps above again
Click to expand...
Click to collapse
samsamuel said:
Also,, regular hd2 or tmous? (I ask because 3.14 rom and 2.08.hspl on a regular don't mix, messes with the ram).
Also, for SD android the hspl and radio rules don't matter in the way they do for nand android.
As an aside, I only once got any haret based rom to load in a dozen or so attempts, and it immediately prevented the winmo rom from starting, forcing a hard reset.
Click to expand...
Click to collapse
Regular, not the tmous... So it is indeed not rare for the haret based rom not to load up in the first or even second attempt ? And will a hard reset really help ? I'll try hard resetting and then repeating the process
samsamuel said:
Also,, regular hd2 or tmous? (I ask because 3.14 rom and 2.08.hspl on a regular don't mix, messes with the ram).
Also, for SD android the hspl and radio rules don't matter in the way they do for nand android.
As an aside, I only once got any haret based rom to load in a dozen or so attempts, and it immediately prevented the winmo rom from starting, forcing a hard reset.
Click to expand...
Click to collapse
Not to cause confusion, but I've found this to be completely untrue. I was running a 3.14 ROM with HSPL 2.08 and Haret for ages, before deciding to give up on WinMo altogether and go to NAND. Everything worked fine.
@OP, have you tried different SD cards?
hey it worked... A simple change of a sd card worked... Tried two others, worked with the third one
thanks all you guys
Can a 3.14 stock TMOUS with 2.15 radio have a dual boot nand android?
No, if winmo is installed nothing else can be on the nand
Then, if I want to dual boot an android SD types are my only choice? I read a thread here stating that NAND is "hands down" better than SD types. If so, then could I still play games in an android SD build as fast as I could in a NAND build?
I recently bumped into this new android version rom
http://hd2apps.blogspot.com/2011/04/htc-hd2-apps-android-cm7-233.html
Like what I've said earlier, my TMOUS is a stock ver. 3.14 with radio ver. 2.15. The post in that blog says that that rom will work on a 2.08 or higher radio, but it stated that 2.12 is recommended, and and hspl 4.
Can I just install the hspl and leave the radio as is?
Bumping thread ^_^
In the Americandroid thread there's a video tut for installing and making the americandroid rom work. At the end of the video the specs of the phone used were posted, it was a 3.14 with a 2.15 radio so that answers my question, but now I have another. The video didn't make it clear whether the 3.14 rom he used was a stock or not, so my question is, can I have an SD android rom on a stock TMOUS winmo rom? Or do I really have to flash a cooked rom?
stock winmo rom is fine
Wow, thanks for the reply. I've been waiting for one in ages ^_^
Well, I tried. Funny thing though... first of, my sim was recognized but I can't seem to see any of my contacts. When I go to "my contacts" it says that I have to import it through accounts or something, but I can't find it anywhere. It says that I have to go to some menu and click on account and import.
Another thing is, when I restarted my phone to use winmo again, most of the programs I installed didn't work anymore like dutty's task manager and the resco file manager to name a few.
Any thoughts on this? I was thinking it was because of the stock rom I have. BTW, I don't have HSPL from what I remember. Just SPL.
Mate you better flash HSPL right now as it will save you from future headaches
yea hspl will save you from plenty of issues down the road
Thanks for the reps guys. I'll post the outcome of this.. thanks again ^_^
Oh, one more question. Does this apply to all SD android roms, or just the one I posted?
Ok, here's the outcome. I tried installing HSPL 2.08 as per instructions of almost all of the sd android rom builds I've seen. Please correct me if I'm wrong.
After installing HSPL 2.08, I noticed a big difference in my winmo. I hardly get any bars in my signal bar, hence, I can't text, I can't call and can't be contacted.
So I went back and installed SPL 3.03.
BTW, I have an unlocked TMOUS with stock 3.14 rom and radio 2.15, and now have SPL 3.03.
I would like to keep my stock 3.14 rom (or, if a cooked rom is needed I would like a closest to stock 3.14 cooked rom) and run an SD android rom. How do I do that? Is there an SD android rom out there that fits my needs?
Thanks for the help again.
i flash my htc hd2 with (nand) Android gingerbread 2.3.2
everything goes fine
but after installation my ph didnt support sd card and my data connection is not working.
i searched whole forum but didnt find help regarding this
please help thanks mandeep
msbhamrba said:
i flash my htc hd2 with (nand) Android gingerbread 2.3.2
everything goes fine
but after installation my ph didnt support sd card and my data connection is not working.
i searched whole forum but didnt find help regarding this
please help thanks mandeep
Click to expand...
Click to collapse
well first off we need alot more information
like what rom did you flash for starters
msbhamrba said:
i flash my htc hd2 with (nand) Android gingerbread 2.3.2
everything goes fine
but after installation my ph didnt support sd card and my data connection is not working.
i searched whole forum but didnt find help regarding this
please help thanks mandeep
Click to expand...
Click to collapse
Whichever ROM you're using is extremely old, so it may have even been a known issue of that ROM (although I highly doubt that) but we need more information as Kamerius said. For the mobile network issue, have you checked that the APN settings are correct?
thanks for reply but...
Thanks to all who replied but as I am new I tell you how I proceeded
I installed active sync in my PC then I flash my HTC hd2 with HSPL4
Then I flash radio 2.15.50.14
Then magldr 113
Then android 2.3.2 all by DFT
Problems that I am facing are
When I insert SD card (on top of the phone)-message. Comes SD card safe to remove and when I try to mountt same message appear, and some times it says SD card is busy. But I tried new sd card and same problem appears
Second problem mobile is not sync up with PC.
Thanks please. Help
msbhamrba said:
Thanks to all who replied but as I am new I tell you how I proceeded
I installed active sync in my PC then I flash my HTC hd2 with HSPL4
Then I flash radio 2.15.50.14
Then magldr 113
Then android 2.3.2 all by DFT
Problems that I am facing are
When I insert SD card (on top of the phone)-message. Comes SD card safe to remove and when I try to mountt same message appear, and some times it says SD card is busy. But I tried new sd card and same problem appears
Second problem mobile is not sync up with PC.
Thanks please. Help
Click to expand...
Click to collapse
Well, can you link me to that ROM please? I wasn't aware that there were any ROMs by DFT outside of the Stock Desire one, so I'd like to see it (although it isn't necessary of course).
You're using an extremely old and outdated method of flashing anyway, everything nowadays is flashed via CWM. See this guide and start by using the wipe data thing in MAGLDR, then just skip to flashing CWM with the correct partition sizes etc. It might not necessarily solve your issue, but you might as well do it nonetheless.
Are you trying to insert the SD card after the phone has booted? Just leave it in the phone and turn it on, I don't see any reason it shouldn't work other than if it was a known bug of the ROM or if your SD card is the one with the issues.
I'm confused about your second issue. The OP says that your data connection isn't working (data being mobile network) but the second post says that it's the USB connection to the PC that isn't working? Which one is it? Or are both of them not working?
msbhamrba said:
Thanks to all who replied but as I am new I tell you how I proceeded
I installed active sync in my PC then I flash my HTC hd2 with HSPL4
Then I flash radio 2.15.50.14
Then magldr 113
Then android 2.3.2 all by DFT
Problems that I am facing are
When I insert SD card (on top of the phone)-message. Comes SD card safe to remove and when I try to mountt same message appear, and some times it says SD card is busy. But I tried new sd card and same problem appears
Second problem mobile is not sync up with PC.
Thanks please. Help
Click to expand...
Click to collapse
My suggestion - flash HSPL 2.08 - from what I heard it's much less buggy and I haven't heard anyone having issues with that.
one thing more
Mine mobile
is anomaly htc hd2 its not from T-Mobile, I purchased it in India only.
msbhamrba said:
Mine mobile
is anomaly htc hd2 its not from T-Mobile, I purchased it in India only.
Click to expand...
Click to collapse
That's fine, it just means it's an EU/International HD2 rather than a TMOUS. The only difference (spec-wise) is that it has 512Mb ROM rather than 1024Mb
Daycrawler said:
My suggestion - flash HSPL 2.08 - from what I heard it's much less buggy and I haven't heard anyone having issues with that.
Click to expand...
Click to collapse
HSPL4 means the package which is used to flash HSPL2.08, it's not a SPL version in itself. The highest SPL/HSPL version is 3.03.
sync
Sync with PC is not working ,mobile conn
ction started after setting. Apn manually.
msbhamrba said:
Sync with PC is not working ,mobile conn
ction started after setting. Apn manually.
Click to expand...
Click to collapse
OK, well as I said try following the guide I posted, as nobody uses the DAF.exe flashing method anymore.
.
Is it possible to get window6.5 back, please provide me the link and way.
Or any other android which is fully compatible with. HTC. Hd2
msbhamrba said:
Is it possible to get window6.5 back, please provide me the link and way.
Or any other android which is fully compatible with. HTC. Hd2
Click to expand...
Click to collapse
Please, just read the guide I posted. Every single version of Android which is in the NAND Development section is 'fully compatible' with the HD2. If you don't do some more reading I refuse to help you, sorry.
Nigeldg said:
Please, just read the guide I posted. Every single version of Android which is in the NAND Development section is 'fully compatible' with the HD2. If you don't do some more reading I refuse to help you, sorry.
Click to expand...
Click to collapse
thsnaks for the guide
one last thing could you please suggest me best rom a2sd or nand which works with cwm
msbhamrba said:
thsnaks for the guide
one last thing could you please suggest me best rom a2sd or nand which works with cwm
Click to expand...
Click to collapse
There is no 'best ROM', it's all a matter of opinion. I prefer ICS ROMs such as NexusHD2 and IceCreamTosti because of the HWA capabilities, but you may not like them. It varies between each user. If you decide to flash one of these, you can create an EXT partition on your SD card and use the app Link2SD from the Play store to use that partition.
Nigeldg said:
There is no 'best ROM', it's all a matter of opinion. I prefer ICS ROMs such as NexusHD2 and IceCreamTosti because of the HWA capabilities, but you may not like them. It varies between each user. If you decide to flash one of these, you can create an EXT partition on your SD card and use the app Link2SD from the Play store to use that partition.
Click to expand...
Click to collapse
thanks for you help till now
i succ sefull y installed [16 MAY 2012][MAGLDR/cLK]TyphooN CyanogenMod 7.2 RC2 v3.8.3[2.3.7][A2SD+][tytung r14] through cwm everything is workign fine
but iw ould like to ask you one thing like you said "If you decide to flash one of these, you can create an EXT partition on your SD card and use the app Link2SD from the Play store to use that partition" i created partion using cwm and installed aap2sd from the market its working great,
but i dont that the partion created by cwm is ext or not
one thing more wht is the difference between ics roms and other roms
msbhamrba said:
thanks for you help till now
i succ sefull y installed [16 MAY 2012][MAGLDR/cLK]TyphooN CyanogenMod 7.2 RC2 v3.8.3[2.3.7][A2SD+][tytung r14] through cwm everything is workign fine
but iw ould like to ask you one thing like you said "If you decide to flash one of these, you can create an EXT partition on your SD card and use the app Link2SD from the Play store to use that partition" i created partion using cwm and installed aap2sd from the market its working great,
but i dont that the partion created by cwm is ext or not
one thing more wht is the difference between ics roms and other roms
Click to expand...
Click to collapse
Did you follow the guide I linked fully? Including step number 2 - partition your storage card for a2sd ROMs? If so, then this is an EXT partition which you have created on your SD card with CWM. If you meant repartitioning the NAND with CWM (i.e. in your case flashing a 150Mb partition) then this is NOT on the SD card and isn't an SD EXT. However, since you have stated that the app App2sd works fine, I think you've done everything correctly. Congrats, you now have a fully functional Android HD2.
The ROM you chose (TyphooN) is a very good one, I used it myself as my standard ROM for the whole of 2011 and a bit of 2012 and it was absolutely great, but right now I personally feel that ICS ROMs are better. ICS is simply the latest version of Android (GB is Android 2.3, ICS is Android 4.0) and it's the best version of Android by far. As well as this, ICS ROMs have full Hardware acceleration. This basically means that games and videos will play a LOT faster on ICS than on GB.
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
tsagas said:
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
Click to expand...
Click to collapse
I don't have any clue what your actual question is supposed to mean, but if you can't install SD Android then it isn't anything to do with bad blocks. You need to give more information, such as which type of HD2 you have, what radio it has, do you have HSPL, what steps you've taken so far etc. Nobody can help without sufficient information.
Sent from my NexusHD2 using XDA
Nigeldg said:
I don't have any clue what your actual question is supposed to mean, but if you can't install SD Android then it isn't anything to do with bad blocks. You need to give more information, such as which type of HD2 you have, what radio it has, do you have HSPL, what steps you've taken so far etc. Nobody can help without sufficient information.
Sent from my NexusHD2 using XDA
Click to expand...
Click to collapse
I have HSPL,my HD2 is a t-mobile my radio is 2.15.50,14 and i follow each and every step the guides i found in this foroum provide...whenever is NAND or SD version
tsagas said:
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
Click to expand...
Click to collapse
Do u have HSPL 2.08?
adil1508 said:
Do u have HSPL 2.08?
Click to expand...
Click to collapse
yes i do
tsagas said:
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
Click to expand...
Click to collapse
I still don't quite understand what the actual issue is. Do ANY ROMs boot on your phone? The reason I ask is because you later contradict this original statement by saying something about A2SD moving your apps to the SD card.
Nigeldg said:
I still don't quite understand what the actual issue is. Do ANY ROMs boot on your phone? The reason I ask is because you later contradict this original statement by saying something about A2SD moving your apps to the SD card.
Click to expand...
Click to collapse
None ROM boots on my phone:/and i asked if A2SD installs the rom into SD or something...
tsagas said:
None ROM boots on my phone:/and i asked if A2SD installs the rom into SD or something...
Click to expand...
Click to collapse
A2SD does not install the ROM to NAND nor does it install NAND to SD. It install apps to your SD card, apps that you use on your phone.
NAND ROMs are flashed directly to your phone and completely remove Windows.
SD ROMS are ran from your SD card with your Windows still functioning when you want.
Dblfstr said:
A2SD does not install the ROM to NAND nor does it install NAND to SD. It install apps to your SD card, apps that you use on your phone.
NAND ROMs are flashed directly to your phone and completely remove Windows.
SD ROMS are ran from your SD card with your Windows still functioning when you want.
Click to expand...
Click to collapse
Hehe, Windows Mobile doesn't 'function', it simply exists
tsagas said:
None ROM boots on my phone:/and i asked if A2SD installs the rom into SD or something...
Click to expand...
Click to collapse
Have you installed MAGLDR and partitioned your internal memory by flashing ClockWorkMod Recovery(CWM)?? And Apps2SD doesnt install any rom. Its just used to transfer applications that run on the internal memory to the sd-ext.(partion of sd card)
Sent from my HTC HD2 using XDA
adil1508 said:
Have you installed MAGLDR and partitioned your internal memory by flashing ClockWorkMod Recovery(CWM)?? And Apps2SD doesnt install any rom. Its just used to transfer applications that run on the internal memory to the sd-ext.(partion of sd card)
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
thats the thing...every time i try to flash CWM i get stucked on Go Go Go!(when i press AD Recovery)
I ve also tried to make bigger partitions and nothing happened...
tsagas said:
I ve also tried to make bigger partitions and nothing happened...
Click to expand...
Click to collapse
I have a hd2 too.
magldr 1.13 .... clockwormod 5.0.2.6 ... Nexushd2 ics 4.0.4 - rom... a2SD-Script ...
200mb nand-partition..5mb cache-partition.. 1 gb ext4-partition and 400 mb swap-partition
I installed my rom witht "hd2 toolkit 4.2.0.1", that can be downloaded here on "xda-developers".
With this tookit you can do followed things:
- Start with a "full wipe" called "task 29" (I think this "task 29" is necessary for your hd2, because of your problems and bad issues you are reporting)
- then partition your nand-memory (for first install i recommen 200mb nand an 40 mb cache - after you recognized that it works, you can reduce cashe to 10 or 5 mb)
- install magldr
- install clockworkmod recovery
- install your rom