Related
I just rooted my friends Fascinate using SuperOneClick and then I installed Rom Manager and flashed clockwork mod but when i go into recovery it says it installation of update.zip failed. Where can I get the update.zip for it. I am trying to flash the dl-30 leaked rom thats out I have it. just cant get the update.zip so he can properly use clockwork mod.
You need to first flash CWM via Odin, before you can use the update.zip. Also, DL30 is an OLD and buggy froyo leak, EB01 is the most recent one, and the ones most of the new roms are being based on.
Thanks I did that. Note when I go into clockwork and try to use nandroid to make a back up I get an error that says its un able to mount his sd
Sent from my DROIDX using XDA App
You might be using an old Clockworkmod. Use this one here.
Edit: I updated the link with the one I use.
Do I just odin this on the fascinate?
Sent from my DROIDX using XDA App
onveiledwings said:
Do I just odin this on the fascinate?
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Yes you just flash it and you will have CWM red
Thanks. This helped alot
Dear XDA World,
I have just recently rooted my phone using the superoneclick root on my 2.2 Froyo Vibrant after a good month of research. Currently, I am running Eugene's R2 Final Gingerbread ROM, and I love it; it is very stable and intricately in tune with the Vibrant's functionality. Now, my problem currently is flashing to a voodoo lag fix (frustrating as hell). Anyway, I have tried the JL4 voodoo. zip, because that is what this ROM is closest to, I believe. When I copied to SD card, and went into clockwork recovery to install, it failed, saying, "installation failed," or something similar to that. I thought that voodoo wasn't working for some reason, so I tried to flash Nero v3's ROM: same outcome. If anyone would take time to help out a new user, I would very much appreciate the help. I wish to put voodoo lag fix on this R2 ROM, to be clear. Please be descriptive.
Sent from my Vibrant using XDA App
please redownload the kernel and reflash.
You need to make sure the zip is on the internal sdcard. This could be your issue.
Sent from my SGH-T959 using XDA App
bellrb19 said:
You need to make sure the zip is on the internal sdcard. This could be your issue.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
u are wrong if kernel was on his external sd and since clockwork dont mount external sd he cant even acces it so its imposible to flash something that is on your external card.
Bartek, more specific, please.
And yes, I'm certain it's on my internal... Haha.
Sent from my SGH-T959 using XDA App
R E D O W N L O A D the file again and R E F L A S H , that is specific enough for You ? )
I have done that before. Same outcome.
Sent from my SGH-T959 using XDA App
dude .when you went to clockwork to flash does it say installation failed or signature verification failed ? something like that didnt expain what your problem was
Yeah, read my first post again, I said it says "installation failed" and said it was aborting. This was all in clockwork.
Sent from my SGH-T959 using XDA App
lol redownload the file again , reflash , or can you download anyother kernel instead of voodoo 4 and try ? or odin back to stock JfD with pit file and chceck repartition or if anyone knows better ............please post .
You sould really make sure the zip package is ZIP package not TAR package too, ZIP=CLOCKWORK, TAR=ODIN ,
I don't use Odin, man. It's a .zip package; example: I am rooted using R2 Gingerbread .zip. Can I not voodoo because I am missing a script or have the wrong kind? I've seen this in a few forums.
Sent from my SGH-T959 using XDA App
Oh and another thing is make sure u have enough room on internal sd about 1gb or more
why wont you flash DEAD HORSE BY EUGENE since GINGER R2 is released by EUGENE and DEAD HORSE is released by EUGENE also they fit like glowe , and you get ext 4 or JFS whichever u prefer .
That sounds like a good idea. What kernal of Dead Horse should I get? Does it matter in regards to compatibility?
Sent from my SGH-T959 using XDA App
A link would be wonderful. Haha.
Sent from my SGH-T959 using XDA App
i cant recomend anything because , i cant because .... it mit wipe your internal sd but http://eb-productions.proboards.com/index.cgi?action=display&board=samsungsgs&thread=28&page=1#916 is the latest and safest before flashing read the thread here http://forum.xda-developers.com/showthread.php?t=936928
Good deal. I will look into that today. Thank you.
Sent from my SGH-T959 using XDA App
cool , np .
Just looking around in thread, no video recording using this kernal, Bartek?
Sent from my SGH-T959 using XDA App
I go to ROM Manager, download the latest recovery, go to reboot to recovery, and as the stock recovery flashes the update.zip to get into clockwork, it blanks then the "samsung" boot up screen comes up and it goes into the stock recovery. I downloaded the newest clockwork recovery dozens of times, tried flashing older versions and ROM Manager says there's an error...this started happening when I flashed the newest version onto my phone I believe. Why is this happening???
Sent from my SCH-I500 using XDA App
Did you also flash CWM recovery in Odin? Because you won't be able to access it without doing that. There are instructions on how to do this in the development section.
Sent from my SCH-I500 using XDA App
Well on rom manager, it gives me the option to flash it straight from my phone. That's how I always got clockwork but now it hasn't been working since the latest update
Sent from my SCH-I500 using XDA App
Use odin to flash CWM found here. Then delete rom manager and forget it exists.
PJnc284 said:
Use odin to flash CWM...Then delete rom manager and forget it exists.
Click to expand...
Click to collapse
Great advice!
Sent from my SCH-I500 using XDA App
PJnc284 said:
Use odin to flash CWM found here. Then delete rom manager and forget it exists.
Click to expand...
Click to collapse
Hahaha yeah, rom manager sucks that much??
Sent from my SCH-I500 using XDA App
Where do I find odin? I've been looking throu the forums forever but I could never find it lol
Sent from my SCH-I500 using XDA App
Any advice for someone running ubuntu 10.10?
Sent from my SCH-I500 using XDA App
There are plenty of links floating around but many of them appear to be broken. Maybe try doing a Google search? Sorry I can't be more specific/helpful.
Sent from my SCH-I500 using XDA App
CWM
I always lose the "red" CWM. I will use the green as long as I can. It is the only one that boots consistently.
ive gone over it here, http://forum.xda-developers.com/showthread.php?t=960118 see if any of those tips help you.
Ok I just got a new vibrant from tmo since mine gave out a few days ago. Its fresh out the box and im trying to get the CW rom manager app back so I can proceed to flash ICS passion on this bad boy,but the free version is not in tge market, the only one I can find is tge paid "key" version which I have purchased but cant use without the free one.can someone send me the .apk or explain why it isnt in the market pretty please?
Sent from my SGH-T959 using XDA App
Here you go
http://db.tt/k72xEB3F
I hope it works cuz I'm on ics
You tha man Dougfresh
Sent from my SGH-T959 using XDA App
Problem parsing package :/ thanks though
Sent from my SGH-T959 using XDA App
Just pm'd you with advice and the reason they pulled it from the market is cuz eclair 2.1 is not supported anymore. I used to use odin to go back to stock 2.1 and then i had a Overstock kernel that I used though odin and it would give me cmw .The only thing is that u need to dl to ypur phone the rom u want first,odin overstock kernel .tar (i think)
Download this update.zip file to flash CWR.
Exel, your everywhere man. Ok I have been spoiled by this app in the past, how do I flash it lol ? I went to recovery,but there are only like 3options and flashing a zip is not one of them... I felt like I knew my way around the vibrant until today. I feel like a total noob
Sent from my SGH-T959 using XDA App
I think it's called reinstall packages in the recovery and it might take a few tries for it to stick
Ill try it a few more times, place the file in DCIM correct?
Sent from my SGH-T959 using XDA App
No onto SD..
Edit have u tried rom toolbox...
Also I pm d u with more advice
That may have been the problem on my 1st try. But SD seems to be the external
Sent from my SGH-T959 using XDA App
No u have internal and external sds.unless u have a Vib 4g which only has external. Internal is where u have all ur files e.g. dcim, android ,data,download, etc.paste it onto that so u have a file called update.zip along with all those before mentioned files
---------- Post added at 02:33 AM ---------- Previous post was at 02:31 AM ----------
Did you dl kernel flasher yet from the market. Make sure you're rooted 1st
Just got the kernel flasher, use it to flash the update.zip?
Sent from my SGH-T959 using XDA App
Now dl cm7 build #182 completely on ur phone after that seach for" Overstock kernel zip"preferably on xda and dl that yhen open k.f. app and flash kernel,wait until it completes the ext4 partition (like 5 min) ,pull battery go into recovery which should be now green letters and install cm7
And then once I have cm7 I should be able to find cw manager on market... Wise sir,good workaround.
Sent from my SGH-T959 using XDA App
The overstock is safe to flash onto eclair?
Sent from my SGH-T959 using XDA App
jdcooper said:
The overstock is safe to flash onto eclair?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Make sure you're rooted.Yes.After you flash cm7 then you're good to flash sum ICS goodness . Use one cosmic fyi..Just be prepared if something goes wrong on K.F.(Odin)
MAKE SURE u have a 3g not a 4g Vibrant cuz T-Mobile has discontinued the 3g.Is the back of the phone black or grey?
Ok yes I rooted using an old version of the ryan za oclf app that still has tge root option, has always worked on previous phones and yeah its a 3g the back is black.
Sent from my SGH-T959 using XDA App
What do you mean one cosmic, and I have never had to odin before, not even remotely familiar with it
Sent from my SGH-T959 using XDA App
n00bie lol...odin is what u use when u soft brick ur phone.What stage are u in?
Hi i'm new to xda. Sorry if this posted at the wrong section. If so, can anyone tell how to move it to the correct section
Anyways back on topic. BTW my phone is the gt-p1000n(latin version), android 2.3.3 stock. I tried installing CM9 by following a guide from cyanogenmod's guide to flashing cm9 for the galaxy tab (sorry unable to post link) . Everything went smoothly until it rebooted after flashing the kernel with cwm, it got stuck at the boot screen. I decided to hold the power button until it turned off. So i tried going to CWM and it worked but i seem to be unable to install the CM9 zip. It said something about status 7 error when installing it .
Can anyone be willing to tell me what i did wrong with the procedures. Thanks for your help btw. And sorry for my bad English, it isn't my native language.
Iman176 said:
Hi i'm new to xda. Sorry if this posted at the wrong section. If so, can anyone tell how to move it to the correct section
Anyways back on topic. BTW my phone is the gt-p1000n(latin version), android 2.3.3 stock. I tried installing CM9 by following a guide from cyanogenmod's guide to flashing cm9 for the galaxy tab (sorry unable to post link) . Everything went smoothly until it rebooted after flashing the kernel with cwm, it got stuck at the boot screen. I decided to hold the power button until it turned off. So i tried going to CWM and it worked but i seem to be unable to install the CM9 zip. It said something about status 7 error when installing it .
Can anyone be willing to tell me what i did wrong with the procedures. Thanks for your help btw. And sorry for my bad English, it isn't my native language.
Click to expand...
Click to collapse
reflash stock kernel (overcome)
then flash cm9.zip
Sent from my GT-P1000 using xda app-developers app
asvantypography said:
reflash stock kernel (overcome)
then flash cm9.zip
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Tried it but it didn't work . Still got the error status 7
You need to install overcome rom as well.
I know it is incompatible because the touch screen driver is different,
But only need that so that cm9 installer thinks you are P1000.
So flash
- overcome kernel
- overcome rom
- cm9 for p1n
- gapps
You can skip installing overcome rom by editing the updater script too and remove the assert line at the top and zip it back.
Only if you know what you are doing.
Sent from my GT-P1000 using xda app-developers app
Maybe you must update the ClockWorkMod Recovery to 5.5.x.x version.
To Anyone if you can't find the Overcome kernel.
I've uploaded the Overcome kernel for you
Good luck from Thailand
priyana said:
You need to install overcome rom as well.
I know it is incompatible because the touch screen driver is different,
But only need that so that cm9 installer thinks you are P1000.
So flash
- overcome kernel
- overcome rom
- cm9 for p1n
- gapps
You can skip installing overcome rom by editing the updater script too and remove the assert line at the top and zip it back.
Only if you know what you are doing.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Tried that and still got the status 7 error . I also went to overcome website and it said not to use the overcome kernel for gt-p1000n
Just edit the updater script then
Sent from my GT-I9300 using xda app-developers app
Maybe u used the worng cm9? Are u sure u are using cm9 for p1?
Sent from my GT-P1000 using xda app-developers app
He wanted p1n actually
Sent from my GT-P1000 using xda app-developers app
Removed the lines and now i'm getting status 6 error
What error is status 6 exactly
Seeing so many problems, I think you should restock.
Do you have stock rom?
If not, I still believe you can use overcome method.
Don't worry about the touch driver not compatible. You will be mostly on Odin and on recovery.
You just want to use the gb stock safe to restock with pit selected and repartition.
Then quickly flash overcome kernel and then boot to recovery and flash cm9.
Sent from my GT-P1000 using xda app-developers app
[/COLOR]
priyana said:
What error is status 6 exactly
Seeing so many problems, I think you should restock.
Do you have stock rom?
If not, I still believe you can use overcome method.
Don't worry about the touch driver not compatible. You will be mostly on Odin and on recovery.
You just want to use the gb stock safe to restock with pit selected and repartition.
Then quickly flash overcome kernel and then boot to recovery and flash cm9.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Try with humberos kernel..if overcome kernel dont do the trick..
Sent from my GT-P1000 using xda premium
Just to be sure, the cm9 download link for the gt-p1000n is at 'get.cm/?device=p1n' right?
yes that is for P1000N
Not sure why, but for some odd reason Odin can't detect my tab when it's on download mode
No device added in the message box or no model number. If no model number it is normal.
Sent from my GT-P1000 using xda app-developers app
Odin didn't want to recognize mine either, but if you plug the tab, and close and open Odin, it should detect the com port.
I had a similar problem in the end i installed a rom i downloaded from Humberos's website, jus google Humberos and its the first link, there are the download links at like his 4th post. Good luck
Sent from my GT-I9100 using xda app-developers app
Iman176 said:
Not sure why, but for some odd reason Odin can't detect my tab when it's on download mode
Click to expand...
Click to collapse
Its because of what you did to the USB driver to use Heimdall, read the readme on Heimdall Folder, there is the way to revert the change...
Nekraweas said:
Its because of what you did to the USB driver to use Heimdall, read the reade on Heimdall Folder, there is the way to revert the change...
Click to expand...
Click to collapse
Yeah I used zadig.exe to install the drivers so I could use Heimdall. How do yo revert it back to normal?