Database Users

One click root apps do not work on official DL09

I just noticed that there seems to be some worried about rooting if you ran the verizon DL09 odin package. Don't worry. d2 root method for fascinate found on XDA works just fine. http://forum.xda-developers.com/showthread.php?t=779238
Have not found a one click root that works yet though. If you find one, post it!
**UPDATE**!!!
Looks like there are some that are hit or miss... may have to run them a few times and wait upwards of 5-10 minutes for some.
if you don't want to wait use perm d2 method. happy rooting!

I actually used the one click root method that is found on android central after i upgraded to DL09. Worked for me. It was strange because i had to do it 3 times until it finally ran.
To get it to run it needed over 5 mins (which the once click says if it takes more than 5 mins try again) I had run it then lost track of what i was doing because i was at work. Then next thing i know it completed itself. So i can confirm it does work.

jselden said:
I actually used the one click root method that is found on android central after i upgraded to DL09. Worked for me. It was strange because i had to do it 3 times until it finally ran.
To get it to run it needed over 5 mins (which the once click says if it takes more than 5 mins try again) I had run it then lost track of what i was doing because i was at work. Then next thing i know it completed itself. So i can confirm it does work.
Click to expand...
Click to collapse
Looks like patience is the key here people... if you are familiar with adb, you could probably root it faster. i ran z4 and let it run quite a few times myself before i said screw it (i actually got a FC or 2 as well) and just ran the perm d2 method.
thanks for the heads up!

Possible reason why
I'm gonna look for the page I got my 1 click method from, but it worked for me on the first time. I rooted immediately after flashing the odin file. Then I screwed something up before I pout clockwork on so I reflashed since I lost everything (not really, thanks to Titanium Backup). Then I immediately flashed the clockwork after and then the 1 click failed twice. Reflashed the official dl09 then 1 click and, boom, rooted on the first try.
After doing a little searching, apparently the clockwork.tar flashes a DI01 kernal. So if people are flashing clockwork before rooting, this could be the culprit. I use this method found here
http://m.forum.androidcentral.com/showthread.php?t=33899
Hope this helps some people out.

one click root worked for me

The one click root method from android forums worked for me (said it completed) but none of my root access apps are getting root access.

I rooted through the manual adb method.
I'm having trouble booting into clockwork though.
After grabbing clockwork recovery from ROM manger, it goes to stock recovery where it errors with "signature verification"
do I have to push the original clockwork.tar through odin?
edit: http://forum.xda-developers.com/showthread.php?t=913470 <<< fixed the issue. push through odin

I used the adb method from android central and I had to wait 5-10 minutes to be kicked back out to the windows command prompt after running rage.bin.
It's not just 1 click methods that sometimes take a long time to complete.

i used the 1 click method from dirkk. i had problems with my phone reading as a media driver(trying to sync to my pc) so that was causing the 1 click method to fail at first. once i disabled the media sync it was sucessful first try.

VZW update fix

if your have issues with the update not finishing 100% this will work
http://www.4shared.com/file/3skyGV3V/Verizon-GTab-Stock.html
download the zip using heimdall flash like normal
factoryfs-factoryfs.rfs
zimage-zimage
param.lfs-param.lfs
cache-cache.rfs
recovery-zimage
ignore the rest of the files
then before first boot wipe data and cache reboot
manually use update.zip or just let it download itself
install update and your done
you can verify by going to "about device" build number will be SCH-I800.EC02
use superoneclick for root z4mod not working keep getting f/c's
it seems like anybody who used z4mod to root or flashed recovery "back to stock" is having problems a 100% fix is just download the files from my post and flash like normal then use superoneclick for root
***for it to work you must download the recovery files from my post***
the files in my post are created using a temp. root so the files are a pure clone of unrooted rom 100% stock that is why you have to use superoneclick to root I tried everything and have done this to 6 tabs with no errors
EC02 stock ota update.zip download
http://www.4shared.com/file/qIHEta11/update.html

Thanks, I noticed you posted this on the other thread too. I have never used Heimdall so I was REALLY trying to avoid this but I guess I will have to take the plunge and figure it out.......

this works
I have tried every which way and this way has worked every time for me

Finally worked
works 100% just followed the steps and no problems finally updated!!!!!

It works, 100% Thank you so much for this

This does work, 100%, but please note that it DOES NOT WIPE THE DEVICE. It will boot up with all your stuff. This is not neccessarily practical, but it will probably be fine. If you have any root dependent mods, such as set cpu or lcd density, they wont work and it may operate funny/slow until you reroot and set them back up.

stock restore files download
http://dl.dropbox.com/u/21215221/Verizon-GTab-Stock.zip
or
http://www.4shared.com/file/3skyGV3V/Verizon-GTab-Stock.html
Download Mode (Volume down and power)
Download Heimdall from Here:
http://www.glassechidna.com.au/products/heimdall/
Also just below version 1.1.0 is Microsoft C++ This also needs installed on your machine because it has .dll files Heimdall uses.
Launch download mode on your tab that is already connected to your PC.
unzip heimdall and go into the drivers folder where you will see zadig.exe. Run this.
At the top you see options. Click "list all devices"
Then in the dropdown select Android USB composite device or might say it other ways
Click start and let heimdall download the drivers. Once its finished, close zadig and launch heimdall front end leaving Tab plugged in and in download mode
Unzip the stock files.
the zImage goes in both the Kernel AND Recovery slot.
The factoryfs.rfs goes in Factoryfs
The Param.lfs goes in Param.lfs make sure you use param.ifs not param.rfs
and the cache.rfs goes in the cache slot.
ignore the rest of the files in the zip and just use these
After you have the files in place click start to flash. ALWAYS make sure your battery is sufficiently charged or you will have MAJOR problems.
After this runs you will more then likely have to Power down, wait a few seconds and hold power and up volume to boot into recovery. (NOTE, do not hold power too long, just long enough to turn it on, then continue holding up volume till you see recovery. WIPE DATA AND CACHE. Tab should boot.
then let update download install it and you can use superoneclick if you want root back

This worked!
Thank you lexriley! That seemed to work. I forgot to wipe data/cache before i applied the update.zip, it still worked anyway. I should probably have wiped the data/cache.
Thank you !!!!!! Great Work!

Thanks so much. I rooted using Z4 and the update failed. I used your instructions and got up and running again! You saved my Tab!

I'm happy its working for everyone like it worked for me

100% fully working!!!!!!!
thank you lexriley your guide is easy to follow and do your the man!!!!!!

This should be a sticky!!!!
Sent from my ADR6300 using Tapatalk

Anyway to turn off the nagging update notification?. I have my tab where I want it, while your walk through is detailed and obviously a good solution, seems like an awful alot of time just for a minimal upgrade in software?.

oldmacnut said:
Anyway to turn off the nagging update notification?. I have my tab where I want it, while your walk through is detailed and obviously a good solution, seems like an awful alot of time just for a minimal upgrade in software?.
Click to expand...
Click to collapse
Well let me tell you what I have noitced with the upgrade
1) Stock browser speed is faster, but I dont use the stock so that wasnt much help
2)There is now a item in the top of settings for you to activate your device through verizon (like you would using *228 or whatever it is from your phone)
3)The wifi searching thing. I often forget to turn wifi off so when I drive it drains battery searching, the drain is significantly less now.
4) BLUETOOTH HID SUPPORT! Sorry for the caps but I have been wanting this one for quite some time now. First thing I did was try my MX5500 at home and it paired up and worked perfectly.
5)Hyperlinks in emails issue. Constantly many hyperlinks were cut off and I wasnt able to click them, this has now been resolved.
If none of these things are appealing to you then by all means you have no need to upgrade. But I found that most of this was a welcomed change. The tab seems faster, but I believe that is just due to the fact that I do not have LCD density changing the density, which I find slows down many things on the tab.

lexriley said:
I'm happy its working for everyone like it worked for me
Click to expand...
Click to collapse
At first it didn't work for me. I got "failed to access device. Error: -12". But that was my fault. I had forgotten to load the zagdig drivers for Heimdall. So I did that following the instructions in this thread and tried again. First try, I simply got a "fail", second try worked like a charm. When finished the Tab rebooted on its own.
As soon as it rebooted, I got the message that an update was waiting to be installed (EC02). Since I had already wiped the cashe (twice) on earlier attempts, I just went ahead and let the update install. Worked like a charm and now I've got EC02 update.
As a help to other noobs, I will add this.... The reason the update would not install in the first place is that I had deleted the VZW Vcast bloatware. Lexriley's fix here reinstalled all that VZW junk, which is what ultimately solved the problem. LESSON LEARNED: If you want future updates NEVER delete pre-installed apps. Either rename them and back them up to the SD, or better yet, "freeze" them with Titanium Backup.
Now to begin the task of re-rooting, installing ADW, and putting my Tab back into shape the way I had it.
BIG THANKS goes out to lexriley!! (And by all means, make this thread a sticky.)
Robin

Excellent work! This worked perfectly.

Got it, installed the newest Keis for drivers.

i hate to be that guy but is it possible to get odin files too? i can never get heimdall to work but odin works just fine

Robin M said:
As a help to other noobs, I will add this.... The reason the update would not install in the first place is that I had deleted the VZW Vcast bloatware. Lexriley's fix here reinstalled all that VZW junk, which is what ultimately solved the problem. LESSON LEARNED: If you want future updates NEVER delete pre-installed apps. Either rename them and back them up to the SD, or better yet, "freeze" them with Titanium Backup.
Click to expand...
Click to collapse
So if I just restore the vcast stuff then I should be able to update without doing all the recovery stuff? I just renamed them all with a .bak at the end instead of deleting just incase I needed them again so I still have them all.
Edit: apparently yes, removed the .bak I added to the files names, un-rooted, clicked update and it worked fine

shiltz said:
Edit: apparently yes, removed the .bak I added to the files names, un-rooted, clicked update and it worked fine
Click to expand...
Click to collapse
You're welcome. ...Isn't it great when you answer your own questions? I find myself doing that more frequently now, as I learn more about Android and my Tab - mostly from this forum.
PS... Now that you've successfully updated, take a look at the recovery.log file in your /cashe/log folder. I was amazed at the number and the variety of files this upgrade patched.

Root intercept on froyo????

My friend has the samsung intercept and I was going to help him root it. I have tried Z4root and gingerbreak but they didn't work.
Does anyone have a site on how to root? Or instructions?
I am a very experienced android user and I am very comfortable with ADB if it is needed.

Anybody know?

Let's try again. Does anyone here know?

S.D.X. Everything you need to know for the intercept

Yes I found that method as well. We tried that about twenty times along with another 1 click at xda, z4, and gingerbreak. Is there an Adb method? Also, would rageagainstthecage work?

Jmoney47 said:
Yes I found that method as well. We tried that about twenty times along with another 1 click at xda, z4, and gingerbreak. Is there an Adb method? Also, would rageagainstthecage work?
Click to expand...
Click to collapse
S.D.X. is a website S.D.X. developers They have several guides to rooting.I rooted mine with a programed called sw updater with my pc but now ther are easier ways.

Ok thank you I will check it out

You're going to need to run one (or several) of the root exploits (until they 'take') and then edit some files manually via adb to make it permanent. See the SDX Developers website as previously noted.

It won't let me post a link but Google this...
how-to-install-custom-kernelrom-on-your-intercept-using-cm01-recovery
I did it with SWUpgrade Tool, but...
1) Even though I could connect and swap files between my phone and my computer over USB, SWUpgrade for some reason would not recognize my USB connection on Windows XP SP 3. This page along with the Samsung driver link on the same page saved my ass...
Google this - Troubleshoot driver error June Fabrics android
2) With the SWUpgrade you have to be really quick and unplug the USB and take out the battery when he says to, or you will not get the custom recovery installed. It took me about 4 tries before I was able to get the custom recovery in my phone.
I previously did the rageagainstthecage method, and while it worked, at one point I stupidly took out the battery when it froze before I had put in a custom recovery and done a backup and I very nearly bricked my phone. It would not bootup after that no matter what. Fortunately I was able to boot into the Virgin Mobile recovery and start from scratch wiping and resetting my phone, but I had to re-download all my apps from the Market all over again which fortunately the Market kept a record of.
I used the first link for the kernel and I am very happy. Just take it slow, be careful, and follow the instructions exactly.

Rooting using ADB Tool Manual Method
Please see my post in the following thread:
http://forum.xda-developers.com/showthread.php?p=13849534#post13849534

Ok guys thanks for the advice however I have been having one problem:
I cannot seem to get the drivers installed successfully on my computer. It is windows vista x86. I have tried the easytether drivers and the samsung drivers but for some reason they don't work. Any ideas?

[Q] How to install Aurora ICS on default 2.2.1

Hey!
I've been looking at ways to make my phone a little bit faster as well as more aesthetically pleasing, and i ran into the Aurora ICS 4.03 - thread.
However, i have next to no knowledge of smartphones and android, and i am completely baffled by the instructions, and i can't seem to be able to find a noob-friendly guide to installing the ROM.
Can you fine gentlemen help a beginner along?
The thread had links to two different guides, one of which made no sense to me plus it was a guide to convert from Cyanogenmod to the Aurora ICS, thus useless to me, while the other referenced a rooting tool that had no working download link and the one torrent i found for it, the program didn't work at all.
TL;DR; Need help, have no android mod experience.
Model n. U8800
Android v. 2.2.1
Baseband v. 129005(Whatever this is)
Kernel v. 2.6.32.9-perf

Simply install the latest 2.3 update from Huawei then follow the steps on opening message of the Aurora ICS topic.
So you have to:
- download and install the 2.3 official update
- root the 2.3, for instance with GingerBreak
- install CWM recovery, e.g. [RECOVERY][04.01.2012][U8800] ClockworkMod [v5.5.0.4]
- go to CWM and do a factory reset
- still on CWM flash the ics-aurora zip
and you're done.

VuDuCuRSe said:
Simply install the latest 2.3 update from Huawei then follow the steps on opening message of the Aurora ICS topic.
So you have to:
- download and install the 2.3 official update
- root the 2.3, for instance with GingerBreak
- install CWM recovery, e.g. [RECOVERY][04.01.2012][U8800] ClockworkMod [v5.5.0.4]
- go to CWM and do a factory reset
- still on CWM flash the ics-aurora zip
and you're done.
Click to expand...
Click to collapse
Thanks, i just updated to 2.3.5, but z4root started freezing and crashing. I'll try out gingerbreak.

SuperOneClick do the job

Loureiro said:
SuperOneClick do the job
Click to expand...
Click to collapse
Didn't work, it wouldn't find my phone for some reason.
Also, Gingerbreak doesn't work either. Ran it thrice already, each time for at least 20 minutes, no go.
I've been at this for at least 4 hours already, constant problems.. About to throw in the towel.

pepejovi said:
Didn't work, it wouldn't find my phone for some reason.
Also, Gingerbreak doesn't work either. Ran it thrice already, each time for at least 20 minutes, no go.
I've been at this for at least 4 hours already, constant problems.. About to throw in the towel.
Click to expand...
Click to collapse
try doomlord method. worked for me. make sure your computer is able to run adb platform.

Loureiro said:
try doomlord method. worked for me. make sure your computer is able to run adb platform.
Click to expand...
Click to collapse
...What? Never done this before mate, you're going to have to explain that a little more..

pepejovi said:
Didn't work, it wouldn't find my phone for some reason.
Also, Gingerbreak doesn't work either. Ran it thrice already, each time for at least 20 minutes, no go.
I've been at this for at least 4 hours already, constant problems.. About to throw in the towel.
Click to expand...
Click to collapse
Do you have you USB drives installed correctly? When i rooted my phone i had no issues with SuperOneClick. Also, are you using USB debbuging? I think mine only worked when i turned that on.

Driftie said:
Do you have you USB drives installed correctly? When i rooted my phone i had no issues with SuperOneClick. Also, are you using USB debbuging? I think mine only worked when i turned that on.
Click to expand...
Click to collapse
Looks like i was using SuperOneClick 2.3.2 version, downloaded the 2.3.3.0 version and it's rooting right now just fine.
At least i think it is.
It's at Step #7 of Shell rooting device... Not responding. Should that happen?

I will give you a step-by-step guide.
-First turn off Fastboot, under Settings->Applications->Fastboot
-Check Unknown Sources
-Go to Development-> check usb debugging and allow mock locations.
now go to your home screen and open the dial and enter this code:
*#*#2846579#*#*
->ProjectMenu - >background... -> Log dump -> Log on.
Restart your phone and voila, you're ready to root via SuperOneClick.

Loureiro said:
I will give you a step-by-step guide.
-First turn off Fastboot, under Settings->Applications->Fastboot
-Check Unknown Sources
-Go to Development-> check usb debugging and allow mock locations.
now go to your home screen and open the dial and enter this code:
*#*#2846579#*#*
->ProjectMenu - >background... -> Log dump -> Log on.
Restart your phone and voila, you're ready to root via SuperOneClick.
Click to expand...
Click to collapse
Thanks, the guide i was following did not mention turning off fastboot.
Works now, +Thanks.

grateful thanks

also thanks

Lg G Tab 10.1 Vk700 Root Method Confirmed!

This Has been confirmed to work on VzTab May not work when lolipop comes. So i found this on accident and tryed these two methods together to get the end desired result. Root Access! The first thing to adress is if your using windows 7 or 8 its a bitc# to get adb to recognize that your devices is connected. So if this becomes a problem i can find the link i used to address it. So you will download all the required files that go along with this 1st method contained here.
http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
Along with the lg drivers youll need the tablet to install the verizon software upgrade assistant too.
Fallow all of the processes until you reach the download mode. I could not figure out how to manually push buttons to make it into download mode so use this next link and run all the procedures till its in download mode.
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
Now you have the desired screen fallow the rest of the instructions from the first tut. Then press and hold power and volume buttons to reset. Since you cant take battery out or command it to reset. The Downloader will indicate 0% still so dont think it failed if it doesnt say 100%.

and too root the lollipop update download the files off rootjunkys site awesome work lol yes it was originally for the note 4 but shush it works
install kingroot (yes its in chinese dont worry we will be installing supersu very soon)
make sure adb is working and usb debugging is enabled which if you are on here i safely assume you are
extract the supersume zip (1 or 2 i couldnt see a diff)
and run the superme bat file (it will walk you through it )
itll soft reboot when done and you are solid and it will hold root
yes the bat will say disableing knox again it was for the note 4 but works fine ive done this
link to get files : http://rootjunkysdl.com/?device=Gala...=Kitkat Root

I don't have this tablet but replacing kinguser with supersu should be doable on this tablet as well (I did it on my forge tv)
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html
all you do is install terminal emulator and copy files and run the command.

So now i cant upgrade to lolipop im guessing due to the fact it knows its modified now it will give error at 1% anyone have the factory image and how would i go about recoving it to stock image would i need cwm recovery to accomplish this? I really just want to upgrade so maybe the bluetooth stack has been fixed so i can use my wii mote to play games.

Alpha_wolf said:
and too root the lollipop update download the files off rootjunkys site awesome work lol yes it was originally for the note 4 but shush it works
install kingroot (yes its in chinese dont worry we will be installing supersu very soon)
make sure adb is working and usb debugging is enabled which if you are on here i safely assume you are
extract the supersume zip (1 or 2 i couldnt see a diff)
and run the superme bat file (it will walk you through it )
itll soft reboot when done and you are solid and it will hold root
yes the bat will say disableing knox again it was for the note 4 but works fine ive done this
link to get files :
Click to expand...
Click to collapse
Thanks for the timely post of this.
Don't know if it's something on my end but the link gives 'access denied', fortunately you had said it was for a note4 so I just looked for that and came up with the right files, just thought you might want to know.
One minor hiccup, and I'm not sure where to post it, so I'll post it here: SuperSu took 5 tries, finally got success, but now it keeps wanting to update the su binary again, it's definitely rooted, and the binary's already updated so...[shrugs]. The app said if there were any problems with it to post it to xda, soooo, here it is, sorry if this is the wrong place to put it.
Other than that tho, it worked great, thanks again!

laperro said:
Thanks for the timely post of this.
Don't know if it's something on my end but the link gives 'access denied', fortunately you had said it was for a note4 so I just looked for that and came up with the right files, just thought you might want to know.
One minor hiccup, and I'm not sure where to post it, so I'll post it here: SuperSu took 5 tries, finally got success, but now it keeps wanting to update the su binary again, it's definitely rooted, and the binary's already updated so...[shrugs]. The app said if there were any problems with it to post it to xda, soooo, here it is, sorry if this is the wrong place to put it.
Other than that tho, it worked great, thanks again!
Click to expand...
Click to collapse
idk i got that once and i updated it and it was fine so idk sorry tho

Alpha_wolf said:
and too root the lollipop update download the files off rootjunkys site awesome work lol yes it was originally for the note 4 but shush it works
install kingroot (yes its in chinese dont worry we will be installing supersu very soon)
make sure adb is working and usb debugging is enabled which if you are on here i safely assume you are
extract the supersume zip (1 or 2 i couldnt see a diff)
and run the superme bat file (it will walk you through it )
itll soft reboot when done and you are solid and it will hold root
yes the bat will say disableing knox again it was for the note 4 but works fine ive done this
link to get files : http://rootjunkysdl.com/?device=Gala...=Kitkat Root
Click to expand...
Click to collapse
Thank you thank you!!!
This worked...had to fight a few areas but it all worked...
Is it possible to get custom recovery like TWRP?

parcou said:
Thank you thank you!!!
This worked...had to fight a few areas but it all worked...
Is it possible to get custom recovery like TWRP?
Click to expand...
Click to collapse
not that i know of the device is still pretty new

I found this method incredibly easy: http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
I just had to put it on PTP instead of MTP. And after the reboot, I had to manually boot it on download mode (following the software's directions).
It's working flawlessly.