Verizon Users Who Flashed Vodoo Plus - Galaxy Tab General

I flashed the Vodoo plus using the method below. My problem is that
it works pretty well when I clock it down to 1.2ghz. But when I turn it
up to 1.4ghz it hangs up and I have to restart it.
I have to voltage app installed also. What settings should I use in set cpu
and the voltage app. Thanks
Just a note set at 1.4ghz I have gotten a Quadrant score of 2166.
READ ABOUT SGS KERNEL FLASHER HERE
Download a kernel zImage- Standard Kernel or 1.4GHz Overclocked Kernel | (Voltage Control App) | (source)
Flash via SGS Kernel flasher (really, just select it. I don't think anyone should be lost by this process).

Related

how to overclock and gain maximum battery and performance

Hi everyone... i have samsung galaxy S I9000 base rom JVP 2.3.4 and CWM recovery 3... its rooted can anyone suggest me how to gain maximum battery and phone performance ...
which is the best Overclocking app
and wat are the frequecy to be set
please advice me how to gain maximum phone performance and battery performance...
Thanks in advance
wondering the same thing.
could any one give detailed instruction?
maybe u should try a based rom (JVQ or JVR) and a kernel (like galaxian EE or semaphore ) + JVR modem
Use odexed JVR on latest galaxian kernel, there are good odex themes (I use EE SP1 clocked to 1.1ghz via tegrak. This is a minor OC but voltage at 1.1 is lower than standard 1.0 ghz!) remove all the crap bloatware (I remove loads of stuff and all samsung apps using sgs chlorine) use zeam launcher (fast, lightweight). Use setcpu for screen off profiles and also juice defender.finally, convert to ext4 then back again to rfs to clean file systems. Then calibrate battery, use noop scheduler. This will give you a very fast phone with great battery life
Sent using geek power
thanks a lot dude let me try will hope this works fine
gsw5700 thanks for the sugession ... but i am confused wen i check for this kernel .... http://forum.xda-developers.com/showthread.php?t=1196391
it says flash it if u have ODEXED JVR ROMS only!!! but my rom is JVP
please let me know how to go further and also let me know is the camera application is stock galaxy or hacked camera
thanks in advance
Flash odexed JVR, then you can flash this theme (that I use). Then flash chainfire 4.1 kernel to get root, then flash latest galaxian kernel. Use setcpu and juice defender to get good battery savings
Don't forget to hard reset/wipe after flashing jvr, tick to re partition, wipe both caches and fix permissions after flashing galaxian
Sent using geek power
thanks dude i have followed the procedure... let me check the performence
it gave me 16 hours of battery life .. and performance was stable
gsw5700 said:
finally, convert to ext4 then back again to rfs to clean file systems.
Click to expand...
Click to collapse
Why not just stay on ext4?
RFS will defragment after a while (depending in usage), I like to defrag file systems every month or so. I haven't actually tested it, but hope it will provide additional benefit. I also like to use it for a while whilst on ext4 to prove that ext4 doesn't feel any faster at all than rfs!!
gsw5700 said:
Use odexed JVR on latest galaxian kernel, there are good odex themes (I use EE SP1 clocked to 1.1ghz via tegrak. This is a minor OC but voltage at 1.1 is lower than standard 1.0 ghz!) remove all the crap bloatware (I remove loads of stuff and all samsung apps using sgs chlorine) use zeam launcher (fast, lightweight). Use setcpu for screen off profiles and also juice defender.finally, convert to ext4 then back again to rfs to clean file systems. Then calibrate battery, use noop scheduler. This will give you a very fast phone with great battery life
Sent using geek power
Click to expand...
Click to collapse
Thanks for those suggestions! I'll try them.
Sent from my GT-I9000 using XDA Premium App
I also suggest Galaxian. It's pretty neat.
So how long battery life do u guys get on undervolted galaxian?
Im on JVR w/ talon kernel OC'd to 1.2 and UV'd and i barely get 2 days of little use.
bufferpl said:
Why not just stay on ext4?
Click to expand...
Click to collapse
Because some kernels don't need any lagfix actived
It's not about fixing lag, that is just terribly outdated but traditional terminology.
RFS isn't slower than ext4, but the letter is still the better filesystem by it's journaling and fragmentation behavior.
In a nutshell: you don't have to convert to ext4 to have a smoother device, but you might still want to do so if you want a better file system running your device.
bufferpl said:
So how long battery life do u guys get on undervolted galaxian?
Im on JVR w/ talon kernel OC'd to 1.2 and UV'd and i barely get 2 days of little use.
Click to expand...
Click to collapse
I get about one day of medium to heavy use and a day and a half if I don't do much. I lose about 2-3% battery over night (using juice defender)
Sent using geek power
my signature tells the setup. undervolting for the lower frequencies helps. Also check out Zach/picachu's screen state scaling and system scripts. Combine with the latest talon kernel and you are set. Tegrak aop is optional for overclock above 1200
**Simply Honey 5.0 JVR, Talon kernel & Tegrak OC app [email protected]**
rlorange said:
my signature tells the setup. undervolting for the lower frequencies helps. Also check out Zach/picachu's screen state scaling and system scripts. Combine with the latest talon kernel and you are set. Tegrak aop is optional for overclock above 1200
**Simply Honey 5.0 JVR, Talon kernel & Tegrak OC app [email protected]**
Click to expand...
Click to collapse
and how much battery time do you get with that setup?

[Q] Overclocking GingerDX v017 How To

Fresh installation of GDX v17 from original 2.1.1 have no OC states (MHz) in Settings/"Cyanogen"/"Performance"/CPU. Are there any acurate method to install some mod that gives abilities to choose clock setting? MiniDX6 1.02 had about 6 choices for min and max CPU MHz...
OC
If you're using Stock SE Kernel, copy X8oc.ko to system/lib/modules, check permissions, and reboot.
if you want to use LinuxDX, DX already said it won't upload module onto the Kernel, so if you want OC that bad, look for a differente combo (Kernel/ROM)

[Q] repencis rom 3.5 for galaxy y

Hey....guys i installed repencis rom 3.5 for galaxy y......it's kinda great.....but one problem....i dunno how to overclock my phone on this new custom rom.....i tried the same overclock procedure that i tried wen i had my stock rom but the phone did not start up on this new rom during boot process...please help urgent??????
Sharran said:
Hey....guys i installed repencis rom 3.5 for galaxy y......it's kinda great.....but one problem....i dunno how to overclock my phone on this new custom rom.....i tried the same overclock procedure that i tried wen i had my stock rom but the phone did not start up on this new rom during boot process...please help urgent??????
Click to expand...
Click to collapse
I am very sorry to inform you that Repensis Kernel doesn't support overclocking. If you want an overclock kernel, try Merruk Technology Kernel V2.5. Else, flash Savie's Kernel and overclock it the way you did so. Merruk kernel v2.5 is already overclock to 1.2 GHz. You don't need to flash overclock zip again. But Savie kernel is not yet overclock. You need to flash the overclock zip file to overclock it to 900MHz. Only Stock kernel, merruk kernel and savie kernel supports overclocking till date of all the available kernels for Galaxy Y. Always keep in mind that overclocking drains the battery and heats up the phone which can cause damage to your handset. Just reflash Repensis Rom v3.5 via Clockwork Mode Recovery or via Stock Recovery.
Hit thanks if I helped you.
Sent from my GT-S5360 using xda premium
thadoukuki said:
I am very sorry to inform you that Repensis Kernel doesn't support overclocking. If you want an overclock kernel, try Merruk Technology Kernel V2.5. Else, flash Savie's Kernel and overclock it the way you did so. Merruk kernel v2.5 is already overclock to 1.2 GHz. You don't need to flash overclock zip again. But Savie kernel is not yet overclock. You need to flash the overclock zip file to overclock it to 900MHz. Only Stock kernel, merruk kernel and savie kernel supports overclocking till date of all the available kernels for Galaxy Y. Always keep in mind that overclocking drains the battery and heats up the phone which can cause damage to your handset. Just reflash Repensis Rom v3.5 via Clockwork Mode Recovery or via Stock Recovery.
Hit thanks if I helped you.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
thanks a lot for the help....
thadoukuki said:
I am very sorry to inform you that Repensis Kernel doesn't support overclocking. If you want an overclock kernel, try Merruk Technology Kernel V2.5. Else, flash Savie's Kernel and overclock it the way you did so. Merruk kernel v2.5 is already overclock to 1.2 GHz. You don't need to flash overclock zip again. But Savie kernel is not yet overclock. You need to flash the overclock zip file to overclock it to 900MHz. Only Stock kernel, merruk kernel and savie kernel supports overclocking till date of all the available kernels for Galaxy Y. Always keep in mind that overclocking drains the battery and heats up the phone which can cause damage to your handset. Just reflash Repensis Rom v3.5 via Clockwork Mode Recovery or via Stock Recovery.
Hit thanks if I helped you.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
You are WRONG.Repencis kernel CAN OVERCLOCK to 312,624,832,also have governors and io scheduler and i use it daily Trust me @Shaaron,repencis kernel can overclock.
funny95 said:
You are WRONG.Repencis kernel CAN OVERCLOCK to 312,624,832,also have governors and io scheduler and i use it daily Trust me @Shaaron,repencis kernel can overclock.
Click to expand...
Click to collapse
Man,where is the overclock frequency???
hmahadi98 said:
Man,where is the overclock frequency???
Click to expand...
Click to collapse
Flash repencis kernel(i use old,from repencis v3.5 rom not new) and install no frills cpu control from google play and you see frequency(312,624,832) also governors and io scheduler and set what frequency you want.I use min 312 and max 624 governor ondemand,io scheduler sio.After my opinion these settings are good because battery not drain fast and performance are good.But if i play gsmes like angry birds i set to min 832 max 832 governor performance and io scheduler vr.
funny95 said:
You are WRONG.Repencis kernel CAN OVERCLOCK to 312,624,832,also have governors and io scheduler and i use it daily Trust me @Shaaron,repencis kernel can overclock.
Click to expand...
Click to collapse
My dear, do you really know what overclocking means? Our CPU is meant to run at the max frequency of 832 MHz and min frequency of 312Mhz. If you want it to run at frequencies higher than 832MHz, you have to overclock the cpu. If you can make your cpu run at frequencies higher than 832 Mhz then it means you have overclocked your cpu and your kernel supports overclocking.I have tried to overclock repensis v3.5 kernel before, and I was stuck at Samsung Galaxy Y screen and the phone didn't boot up thereby indicating that the kernel doesn't support overclocking and hence the cpu cannot be overclock. In short, overclocking a cpu means to make the cpu run at frequencies higher than its permissible max frequency as set my the manufacturer. Better do a little research before posting.
Sent from my GT-S5360 using xda premium
HELP ..
Help PLEASE ... I installed CREED'S ROM 3.5... and I want to overclock it to 1.2 gHz... Please help me step by step procedure!!!! Godbless You

[mini Guide]How to easily overclock Cpu and Gpu on XXLSA and XXLSC :)

Thanks to tegrak now we can easily overclock our note.
Lets Start...
1)First download Tegrak Overclock from playstore.
2)Open the app and in the main window press "Load Overclocking Module"
3)You are ready!!!!
You can easily go: (this are max frequencies, non recomended and stable)
CPU @ 1,6Ghz
Gpu @400Mhz
Lock your gpu @267Mhz
Change Governors an Io schedulers.
Undervolt
Undervolting and Gpu Oc is available only on paid version
Ps:Many thanks to altae for posting this in another thread
Great and use. Nofriils for boot at startup thank
Envoyé depuis mon GT-N7000 avec Tapatalk
Anyone tried? Does it work??
Sent from my GT-N7000 using Tapatalk 2
I try it just for game, and work fine sure
Tegrak NOT works with some kernels. For example, it doesn't works with CM kernel or any STOCK kernel. I'm using it, and I'm using HydraCore kernel. Be careful when you Overclock/Undervolt your CPU or GPU. If you reduce the voltages too much, the note will freeze.
Just to warn....
edit: i just saw the title is "on xxlsa and xxlsc". I didn't know it works with stock (or Philz) JB kernels. Could someone confirm that? Thanks
Overclocking-Undervolting is to do with care. I knew Tegrak 1 year ago... I've uninstalled it, because of easy unstability if not the correct values applied. We must read something about this before apply any value!
The best way, INMHO, to overclock, is to flash a Notecore or Hydracore OC Kernel, whose values has been adapted by developer to our Notes. And use CPU Master or SetCpu to create profiles.
To play with "volting" is an adventure...
Tegrak works on stock (philz) JB kernels. Stock vídeo player dont work if you use Tegrak. Its the only issue i have found.
KD-Rocket fusion+TSF shell+280dpi+1,6OC
You need the paid Version to clock the GPU to 400 MHz...
aftnoon2 said:
Overclocking-Undervolting is to do with care. I knew Tegrak 1 year ago... I've uninstalled it, because of easy unstability if not the correct values applied. We must read something about this before apply any value!
The best way, INMHO, to overclock, is to flash a Notecore or Hydracore OC Kernel, whose values has been adapted by developer to our Notes. And use CPU Master or SetCpu to create profiles.
To play with "volting" is an adventure...
Click to expand...
Click to collapse
Notecore or hydracore dont work on TW JB roms.
KD-Rocket fusion+TSF shell+280dpi+1,6OC
Bad-Pixel said:
Tegrak NOT works with some kernels. For example, it doesn't works with CM kernel or any STOCK kernel. I'm using it, and I'm using HydraCore kernel. Be careful when you Overclock/Undervolt your CPU or GPU. If you reduce the voltages too much, the note will freeze.
Just to warn....
edit: i just saw the title is "on xxlsa and xxlsc". I didn't know it works with stock (or Philz) JB kernels. Could someone confirm that? Thanks
Click to expand...
Click to collapse
Overclocking seems to work on xxlsc
From the man in your attic...
howard bamber said:
Overclocking seems to work on xxlsc
From the man in your attic...
Click to expand...
Click to collapse
Undervolt also? And oc/uv for gpu? Is it works also? It would be perfect!
Sent from my GT-N7000 using xda premium
I thought it was stable on jb, but it is far from it. Mine crashed and boot looped. Had to restore.
From the man in your attic...
howard bamber said:
I thought it was stable on jb, but it is far from it. Mine crashed and boot looped. Had to restore.
From the man in your attic...
Click to expand...
Click to collapse
I don't know the reason for your crash, but maybe you undervolted too much (or your cpu simply doesn't support the OC until 1.6).
I can give you the oc/uv values i'm using everyday (all perfect, no freezes or anything else). You can try these:
(my note has cpu group B and i'm using the hydracore 7.5 maxfu, but i guess those values are okay for almost every note with cpu group b and them don't depend from the kernel you're using)
[CPU]
1400 = 1225mV
1200 = 1150mV
1000 = 1050mV
800 = 1000mV
500 = 925mV
200 = 900mV
100 = 900mV
[GPU]
400 = 1000mV (i'm using this gpu overclock since few days, but it seems to be stable enough)
267 = 900mV
160 = 850mV
[SCHEDULER]
cfq (it was "noop", but i wanted to try this "cfq")
[GOVERNOR]
pegasusq
Everything with "set on boot" ON
Temperatures are ok, even with OC on cpu and gpu. (I remember you i'm using asylumPhoenix rom)
Maybe it will not solve your issue, but you can try
We cant download from playstore in our country
Any chance to have mirror link for download tegrak app?
Sent from my GT-N7000
guys be patient, dont judge JB from their leaks
stock JB will be a better experience
once the sources are released there will be more kernels to choose from......
farzin_silver said:
We cant download from playstore in our country
Any chance to have mirror link for download tegrak app?
Sent from my GT-N7000
Click to expand...
Click to collapse
I could give you a link to download it, but you couldn't use it because you need to buy the full version. The free version is needed ony to know if your kernel is compatible with the tegrak app
Bad-Pixel said:
I could give you a link to download it, but you couldn't use it because you need to buy the full version. The free version is needed ony to know if your kernel is compatible with the tegrak app
Click to expand...
Click to collapse
You can overclock THE Cpu with the free one, too. But GPU OC is not possible, nor undervolting is...
Petros_tigra said:
Thanks to tegrak now we can easily overclock our note.
Lets Start...
1)First download Tegrak Overclock from playstore.
2)Open the app and in the main window press "Load Overclocking Module"
3)You are ready!!!!
You can easily go: (this are max frequencies, non recomended and stable)
CPU @ 1,6Ghz
Gpu @400Mhz
Lock your gpu @267Mhz
Change Governors an Io schedulers.
Undervolt
Ps:Many thanks to altae for posting this in another thread
Click to expand...
Click to collapse
You forgot to add "only in paid version"
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Have you tried the market enabler app?
Sent from my GT-N7000 using xda app-developers app

[KERNEL][Unofficial][Discontinued] Semaphore JB 3.0.0c with Custom Features

This is the modified version of the Semaphore kernel, JB 3.0.0c.
Since so many people were asking me for it, I've decided to share it with you guys.
Disclaimer: I will only update this kernel when I have the time. So do not ask for ETA please.
Before installing this, please take your time to read the Original OP.
This kernel contains every features that the Semaphore Kernel offers but with some additional custom features.
Features (Based on latest Semaphore)
- Linux kernel 3.0.84
- LiveOC
- Custom Voltage
- Voodoo Sound
- BLN & CM LED
- 384MB - 409MB available RAM
- Compiled with Linaro 4.7.3
- O3 optimization
- Auto brightness driver
- Touch Wake
- Vibration intensity
- Deep Idle
- USB host driver
- Governor ondemand (default)
- ondemand: sampling_down_factor tunable by momentum, smooth_ui, early_demand
- Governor conservative (module, smooth_ui)
- Governor smartassV2 (module, smooth_ui)
- Governor interactive
- Noop I/O scheduler (default)
- Deadline I/O Scheduler (module)
- Simple I/O Scheduler (module)
- ROW I/O Scheduler (module)
- CFQ Scheduler (module)
- CIFS as module
- TUN as module
- Logcat disabled (as module only)
- Standard network packet scheduler
- Kernel log buffer size 4KB (from 128KB)
- Reduced debug info
- TinyRCU
- Fast Charge support
- WiFi PM_MAX when suspend
- CWM: AROMA Filemanager
- /system/etc/init.d directory creation if not exist​
Custom Features
Swap/Zram enabled
Normal OC'd over LiveOC
1.1 - 1.4GHz
In-call Volume Hack
Voodoo Color
Entropy Tweaks
Load_freq(4*HZ+61) to avoid Loadavg Moire
arm/crypto: Add optimized AES and SHA1 routines
Backport AIO (Asynchronous IO) from Linux 3.5
Zen IO Scheduler
V(R) IO Scheduler
FIOPS IO Scheduler
IntelliDemand CPU Governor
Lulzactive CPU Governor
Wheatley CPU Governor
Linux 3.0.85
BrazilianWax CPU governor
Adaptive CPU governor
Hyper CPU governor
InteractiveX CPU governor
Lioneheart CPU governor
OnDemandX CPU governor
Lagfree CPU governor
Dynamic FSync
Massive update to IO schedulers
SLQB memory allocator
UKSM 0.1.2.2
Frandom
Plus more features to come in near future....
By installing this, you'll receive no support from Stratosk because;
This is an Unofficial Semaphore Kernel
Stratosk does not support it
So do not bug him if you have a problem with this kernel. But bug me instead!
If you guys want to see some more features added to this, feel free to tell me and I'll try my best to add them to it.
Please note that there are 3 variations:
Normal versions: for CM10 or ROMs without hugemem configuration, available RAM 384MB - 396MB
"s" versions: for Slim Bean ROM or patched ROMs with hugemem configuration, available RAM 397MB - 409MB
"vc" versions: is Voodoo Color Mod
Downloads
Normal Version (384MB - 396MB):
Unofficial_Semaphore_JB_3.0.0c​Normal Version (384MB - 396MB) with Voodoo Color:
Unofficial_Semaphore_JB_3.0.0vc_c​
S Version (397MB - 409MB):
Unofficial_Semaphore_JB_3.0.0sc​S Version (397MB - 409MB) with Voodoo Color:
Unofficial_Semaphore_JB_3.0.0s_vc_c​
Thanks to
Stratosk
kasper_h
fishears
BLOWNCO
Alberto96
And to everyone else that tested the kernel for me.
Source
Original Kernel Source
Modified Kernel Source
How to:
How to enable Swap?​
To enable Swap, you'll need to create a swap partition on you External SD card. I recommend following this guide for it. http://forum.xda-developers.com/wiki/SD_card_partitioning
1. Make sure to backup everything from your SD Card first
2. Do not reformat your SD Card while it's still in your phone, take it out and plug it to your computer through a card reader!
3. I recommend that you only create a Swap Partition around 256MB
4. Follow that guide and when you reach to Step 3, select the option "Linux Swap"
5. When you finished following that guide, plug in your SD Card to your phone and Reboot to Recovery
6. Then flash this zip Enable Swap
7. Reboot your phone and you should be good.
8. To make sure Swap is enable, go to Terminal Emulator and type "free".
9. You should see some info at the bottom about Swap.
How to Enable Zram?​
To enable Zram, go to (Settings -> Performance -> Memory management.)
Or Flash this zip Enable Zram
How to use the OC'd Steps?​
To use the OC'd Steps, use Nstools or CM Performance Settings (Settings -> Performance -> Processor -> Maximum CPU frequency.)
If the chosen Frequency setting is not sticking with Nstools or CM Performance Settings, try using CPU Control Lite or Voltage Control.
I flashed the "s" version and now 720p recording or playback is not working?​
You'll need to flash HugeMem Libs first and then you should have your 720p recording or playback working again.
How to get rid of the Green Screen Flash and get the best colour if using VC version?​
To get rid of it, I recommend using the following Voodoo Color Settings. To change them, use Voodoo Sound app (Available from the market).
Color profiles
Voodoo profile v1
Screen RGB multipliers
Red: 286xxxxxxx
Green: 333xxxxxxx
Blue: 392xxxxxxx
Screen v1 gamma hack
*Reset to 2.3.3 Then Change*
Red: -26
Green: -30
Blue: -33
Or use this gamma hack (Might get the green screen flash but with a better looking colour, thanks to aduka)
Red: -40
Green: -40
Blue: -31
*If you're still getting the green screen flash, increase the "Screen v1 gamma hack" by +4 for the red, green and blue till you stop getting the green screen flash*
Changelogs And Download Mirrors
Changelogs:
*Changes in italic are custom features*
3.0.0c (04/07/2013)
- gpu: pvr: Update to DDK [email protected]
- net: wireless: bcmdhd: Update to version 5.90.195.104
- cpufreq: ondemand: Drop early demand
- UHID built as module
- CWM: upstream updates
- new version AromaFM 1.90 (thanks to amarullz)
Changes by sUsH667 (many thanks) :
- base updated to aromafm 1.90
- deleted all languages except english
- deleted all iconsets
- deleted all fonts except roboto
- added german language
- added iconset "generic" from older aromafm-version
- added preconfigured config
- added bookmarks for often used folders: /system, /sdcard, /emmc, /sdcard/Download
- Linux 3.0.85
- BrazilianWax CPU governor
- Adaptive CPU governor
- Hyper CPU governor
- InteractiveX CPU governor
- Lioneheart CPU governor
- OnDemandX CPU governor
- Lagfree CPU governor
- V(R) IO Scheduler
- FIOPS IO Scheduler
- Remove BFQ Scheduler
- Dynamic FSync
- Massive update to IO schedulers
- SLQB memory allocator
2.9.26 (06/06/2013)
- Linux kernel 3.0.80
- ondemand: Change the calculation of frequency target
2.9.25 (14/05/2013)
- Linux kernel 3.0.78
- Auto brightness: max_lux up to 6000
2.9.23c (29/04/2013)
- Linux kernel 3.0.75
- UHID built as module
- UHID implementation (thanks to pawitp and n8r for merging it to Semaphore)
- CWM 6.0.3.1
- Updated ROW parameters (Thanks to kasper_h)
- Use XZ compression method for both Kernel and Ramdisk
- Fix Memory Leak
- More under the hood tweaks. (Check Github for more detail on commits for Apr 19, 2013)
2.9.21c (10/04/2013)
- Linux kernel 3.0.72
- binder: backport from 3.9-rc (also port some other changes to support this)
- lowmemorykiller: updates from 3.9-rc
- logger: updates from 3.9-rc
- mDNIe: suppress some debug messages (and do so minor cleanup)
- Auto brightness: calculate the average of light sensor adc values instead of normalized brightness
- Auto brightness: Intoduce max_br_threshold tunable. Over this, the brightness is updated to its max value (thanks to Necromancer3)
- Enable again android_ram_console (caused bootloops to some devices)
- Lowmemorykiller: Intoduce a white list with PIDs (up to 6) that never been killed (use: echo "PID1, PID2" > /sys/module/lowmemorykiller/parameters/w_list)
- CWM 6.0.3.0
- built with Linaro 4.7.3 201303
- add option to Semaphore Auto Brightness for parabolic function (echo 0 > /sys/devices/virtual/misc/sema_autobr/linear)
- Added frandom (much faster random number generator)
2.9.18c (02/04/2013)
- Linux kernel 3.0.71
- CWM 6.0.3.0
- built with Linaro 4.7.3 201303
- add option to Semaphore Auto Brightness for parabolic function (echo 0 > /sys/devices/virtual/misc/sema_autobr/linear)
- Zen IO Scheduler
- BFQ IO Scheduler
- IntelliDemand CPU Governor
- Lulzactive CPU Governor
- Wheatley CPU Governor
- UKSM 0.1.2.2
2.9.15c (17/03/2013)
- Linux kernel 3.0.69
- CWM 6.0.2.9
- conservative: Fix sampling_down_factor functionality
- conservative: Fix the logic in frequency decrease checking
- conservative: a minor improvement
- built with Linaro 4.7.3 201302
- remove some kernel debug messages
- KSM enabled
2.9.13c (06/03/2013)
- Linux Kernel 3.0.68
- arm/crypto: Add optimized AES and SHA1 routines
- Backport AIO (Asynchronous IO) from Linux 3.5
2.9.12c (24/02/2013)
- Linux kernel 3.0.66
- USB HID support (as module: usbhid.ko)
- ondemand: early demand feature.
- Entropy Tweaks "Should reduce some lag"; (http://lwn.net/Articles/489734/)
2.9.10c (14/02/2013)
- Linux kernel 3.0.63
- Semaphore Auto Brightness: filter sensor values for more smooth updates.
- Added 1.1GHz to 1.4Ghz OC'd Steps.
2.9.9c (08/02/2013)
- Linux kernel 3.0.62
- Ondemand: a couple of optimizations
- Auto brightness: tiny improvement
- built with Linaro 4.7.3 201301
- Voodoo Color Mod
- In-call Volume Hack
2.9.8c (06/02/2013)
- Linux kernel 3.0.60
- Semaphore Auto Brightness: use default work queue instead of a creating new one (more resource friendly). Change coding style to be Linux compliant.
- Swap/Zram enabled
- 1200Mhz OC'd added
- Initial release of the Custom Kernel of Semaphore​
Re: [Kernel] Unofficial Semaphore JB 2.9.8.c
Do you suggest any changes to voltages if running this at 1200?
Sent from my SGH-I897 using xda app-developers app
Re: [Kernel] Unofficial Semaphore JB 2.9.8.c
m1batt1 said:
Do you suggest any changes to voltages if running this at 1200?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
By default I've increased the voltage for the 1200MHz step to 1350 mV to make sure it's stable for everyone else as not every phone is same. But once your phone is stable at 1200MHz, you can undervolt the voltage until you find a sweet spot.
Like on my phone, I was able to undervolt the 1200MHz to 1275 mV.
Sent from my SGH-I896 using xda app-developers app
m1batt1 said:
Do you suggest any changes to voltages if running this at 1200?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
I UV by 50 with this kernel and devil kernel the same. Stable enough for me
Also. Nick0703. Sorry for posting in Stratosk thread regarding your kernel.
I was wondering how to make the 1200mhz stick. I tried through settings and then tried with nstools. No go on reboot.
Sky
Re: [Kernel] Unofficial Semaphore JB 2.9.8.c
SkyboneNoya said:
I UV by 50 with this kernel and devil kernel the same. Stable enough for me
Also. Nick0703. Sorry for posting in Stratosk thread regarding your kernel.
I was wondering how to make the 1200mhz stick. I tried through settings and then tried with nstools. No go on reboot.
Sky
Click to expand...
Click to collapse
Did you try saving the settings with NsTools?
Sent from my SGH-I896 using xda app-developers app
Nick0703 said:
Did you try saving the settings with NsTools?
Sent from my SGH-I896 using xda app-developers app
Click to expand...
Click to collapse
Yeah i made sure i deleted all my init.d/nstools/semaphore saves in recovery prior to installing as well.
Re: [Kernel] Unofficial Semaphore JB 2.9.8.c
SkyboneNoya said:
Yeah i made sure i deleted all my init.d/nstools/semaphore saves in recovery prior to installing as well.
Click to expand...
Click to collapse
I'll upload my NsTools settings and you can try that. I'll do it like in an hour. As right now I have some other stuff to do.
Edit: Check your PM.
Sent from my SGH-I896 using xda app-developers app
Hey Nick0703 would you be able to get screen off min 100mhz max 400mhz settings into the kernel or is it not really needed? I guess it sits at 100Mhz idle. Also, are you able to deep idle? BTW 1200 is optional but it wont stick on reboot still. Your settings disabled nstools to default.
Re: [KERNEL] Unofficial Semaphore JB 2.9.8.c
Try cpu control lite or voltage control if the settings do not stick.
SkyboneNoya said:
Hey Nick0703 would you be able to get screen off min 100mhz max 400mhz settings into the kernel or is it not really needed? I guess it sits at 100Mhz idle. Also, are you able to deep idle? BTW 1200 is optional but it wont stick on reboot still. Your settings disabled nstools to default.
Click to expand...
Click to collapse
I could add the screen off min 100mhz - max 400mhz to the kernel but I don't think you'll see any difference from it. But I compile a test version with that option and see if there is any difference. And yes, I'm able to deep idle. Deep idle works fine with my phone but keep in mind that not all the captivates are the same.
And for the 1200MHz, try using CPU Control Lite or Voltage Control just like sephhi stated.
Thanks guys. Good looking app but it didn't work. Not sure why. Always able to set to 1200 on devil kernel 4.1.2
Re: [KERNEL] Unofficial Semaphore JB 2.9.8.c
Version 2.9.9sc has been compiled. But it will need to go through testing first as the kernel configuration file had some few changes.
I'll need 2 people to test it. If anyone is interested, send me a PM.
Sent from my SGH-I896 using xda app-developers app
Re: [KERNEL] Unofficial Semaphore JB 2.9.8.c
Nick0703 said:
Version 2.9.9sc has been compiled. But it will need to go through testing first as the kernel configuration file had some few changes.
I'll need 2 people to test it. If anyone is interested, send me a PM.
Sent from my SGH-I896 using xda app-developers app
Click to expand...
Click to collapse
I do believe your kernel has given me better battery life! Excellent work sir!
Sent from my SGH-I897 using xda app-developers app
Version 2.9.9c uploaded.
Enjoy!
Re: [KERNEL] Unofficial Semaphore JB 2.9.9c
Great stuff Nick! Zram and 1200 smooth as butter! I'm too lazy to make a swap partition. LOL!
Sent from a heavily modded Cappy from parts unknown. Slimbean/Semaphore. FTW.
Re: [KERNEL] Unofficial Semaphore JB 2.9.9c
mrsubway said:
Great stuff Nick! Zram and 1200 smooth as butter! I'm too lazy to make a swap partition. LOL!
Sent from a heavily modded Cappy from parts unknown. Slimbean/Semaphore. FTW.
Click to expand...
Click to collapse
Thanks man! And lol making a swap partition won't take you more than 5 mins.
Sent from my SGH-I897 using xda app-developers app
Perfect. Got it to stick 1200mhz! What boot loaders do you use Nick0703? I'm wondering if i9000 loaders would help with deep idle.
Would suck if it's just my phone.
Re: [KERNEL] Unofficial Semaphore JB 2.9.9c
SkyboneNoya said:
Perfect. Got it to stick 1200mhz! What boot loaders do you use Nick0703? I'm wondering if i9000 loaders would help with deep idle.
Would suck if it's just my phone.
Click to expand...
Click to collapse
Congrats man! And I'm using stock Rogers Gingerbread Bootloaders. You could give the I9000 Bootloaders a try but I wouldn't risk it if I were you.
Sent from my SGH-I897 using xda app-developers app

Categories

Resources