Elelinux close-down - Hero, G2 Touch General

Hi.
I just got the Elelinux-7.0.0-RC1-Hero-v1.1.1 installed yesterday.
It runs perfect and Im so happy for the software.
But when I push the on/off button just to turnoff the screen,
then it close-down in a funny way.
I don't know if its meant to be, but it looks funny,
and slows down the time of turning off the screen.
The way it turns off...
First it goes black, with the backlight on.
And then it closes down, from top to middle,
and from buttom to middle.
I'd like to hear it its possible, just to turn off the screen,
where its just goes black?

Hehe, a lot of people are doing their best to switch on the screen-off animation
In cyanogenmod settings look fot display, and simply switch the animation off
hope this helps
brat.haneq

the animation dont work for me. I activate the option, but it doesnt work

On a phone like the Hero, for me at least the animations etc. are a bit of a luxury lol. I prefer speed tbh, and can get by with the slightly fresh look of the GB theme to stop the boredome settling in. I know they are numerous things a ways to configure and try to get it to work some noted in the dev forum.
Loving the new Ele 1.1.1 though. Most stable, usable for me of any of the GB ROMS so far.

Related

**IMPORTANT** Please Test. G-Sensor = Cause of 'Random' freezes + Bad Screen response

I Think I May have found the cause of the otherwise apparently 'random' freezes/hangs and total lack of touch sensitivity.
Basically, In my case at least, It Is the G-sensor/accelerometer.
I have been noticing increasing numbers of these freezes on Mattc 1.5 Froyo, Mainly in Landscape, Mainly in games.
TEST:
I installed 'Iron Sight' Game. (If theory is right then you should be able to use any landscape game, but please try Iron sight if possible.)
I Ran the game and it switched to landscape,
SO I PHYSICALLY TURNED MY HD2 TO LANDSCAPE.
THIS IS WHERE THE FREEZING AND LAGGING BEGAN!
On the Main menu found it difficult to press any options.
When I did manage to start a Game The control buttons were hard to press and the game was unplayable because screen sensitivity was just not there most of the game.
I Then Physically turned the HD2 around and Back to Portrait orientation, AND ALTHOUGH THE SCREEN ORIENTATION STAYED IN LANDSCAPE I DID NOT EXPERIENCE ONE SINGLE LAG OR FREEZE.
BUTTON PRESSES WERE RESPONSIVE TO TOUCH AT ALL TIMES FOR AT LEAST 15 MINUTES!
HERES WHERE IT GETS MORE INTERESTING....
I Then Turned the HD2 back around to landscape again and the Problems IMMEDIATELY RETURNED.
I THEN HELD THE PHONE VERY STILL IN LANDSCAPE AND AFTER A FEW SECONDS THE PROBLEMS/LAG/FREEZES DISSAPEARED AGAIN!!!
TESTED REPEATEDLY!
IN LANDSCAPE AS SOON AS THERE IS ANY PHYSICAL MOVEMENT, THE GAME FREEZES, BUT IF I KEEP IT STILL THE GAME RESPONDS PERFECTLY WITHOUT HESITATION.
Can some of you please test this theory?
A cradle/Dock would be handy for testing but it is possible to keep the phone still enough in-hand in my tests.
Use the game "Iron Sight" where possible, but use other games/apps too if you have time or inclination
Post the results below ( with logs where possible ?) Please.
Note:
After discovering the above, I did a search on XDA and found that a member called 'Hinky' and touched on this but I think I have narrowed it down.... I think
Please test and confirm (or debunk lol).
Thanks.
thesweeney said:
I Think I May have found the cause of the otherwise apparently 'random' freezes/hangs and total lack of touch sensitivity.
Basically, In my case at least, It Is the G-sensor/accelerometer.
I have been noticing increasing numbers of these freezes on Mattc 1.5 Froyo, Mainly in Landscape, Mainly in games.
TEST:
I installed 'Iron Sight' Game. (If theory is right then you should be able to use any landscape game, but please try Iron sight if possible.)
I Ran the game and it switched to landscape, SO I PHYSICALLY TURNED MY HD2 TO LANDSCAPE.
THIS IS WHERE THE FREEZES BEGAN!
On the Main menu found it difficult to press any options.
When I did manage to start a Game The control buttons were hard to press and the game was unplayable because screen sensitivity was just not there most of the game.
I Then turned the HD2 Back to Portrait mode AND ALTHOUGH THE SCREEN ORIENTATION STAYED IN LANDSCAPE I DID NOT EXPERIENCE ONE SINGLE LAG.
BUTTON PRESSES WERE RESPONSIVE TO TOUCH AT ALL TIMES FOR AT LEAST 15 MINUTES!
HERES WHERE IT GETS MORE INTERESTING....
I Then Turned the HD2 around to landscape again and the Problems IMMEDIATELY RETURNED.
I THEN HELD THE PHONE VERY STILL IN LANDSCAPE AND AFTER A FEW SECONDS THE PROBLEMS/LAG/FREEZES DISSAPEARED AGAIN!!!
TESTED REPEATEDLY!
IN LANDSCAPE AS SOON AS THERE IS ANY PHYSICAL MOVEMENT, THE GAME FREEZES, BUT IF I KEEP IT STILL THE GAME RESPONDS PERFECTLY WITHOUT HESITATION.
Can some of you please test this theory?
A cradle/Dock would be handy for testing but it is possible to keep the phone still enough in-hand in my tests.
Use the game "Iron Sight" where possible, but use other games/apps too if you have time or inclination
Post the results below ( with logs where possible ?) Please.
Note:
After discovering the above, I did a search on XDA and found that a member called 'Hinky' and touched on this but I think I have narrowed it down.... I think
Please test and confirm (or debunk lol).
Thanks.
Click to expand...
Click to collapse
Yes this is something that the devs have been discussing. It does seem that the freeze issue is in fact related to the g sensor. I don't know if anyone is working on it at this time but I believe Cotulla will try to sort it out for his September release
ala380 said:
Yes this is something that the devs have been discussing. It does seem that the freeze issue is in fact related to the g sensor. I don't know if anyone is working on it at this time but I believe Cotulla will try to sort it out for his September release
Click to expand...
Click to collapse
DOH! Didnt know it was already a known issue LMAO
I'll get my coat....
thesweeney said:
DOH! Didnt know it was already a known issue LMAO
I'll get my coat....
Click to expand...
Click to collapse
Lol keep with the testing though I didn't figure that much out
Hmmm this is def the prob for my touch screen issues. I tested a bit using the latest mattc Leo + Froyo w/Sense 1.5 version, with latest FULLRAM. I found that while on the sense home screen if I hold the phone out in front of me either landscape and portrait it's ok, and I can do whatever I want at full speed no lag at all. THEN if I lay the phone flat, It freezes. I did this like 20+ times and every time It would freeze whether I was playing a game or reading an email.
This also happen to me. Using Mattc 1.5 Froyo, it happens when using internet browser. The screen will freeze or not response right after i turn from Portrait to Landscape or sometimes have to wait for few seconds. I have to turn my device from Landscape to Portrait, and back to Landscape again, then the screen responses back to normal. This also happens in Copilot app when using in Landscape mode.
I turned off the screen rotation
What I did since i installed my ROM with 380mb ram is to turn off all screen rotation settings, so far so good, I haven't notice any freeze or lag so far in any application or while waking the device up, I used to have it and I hate it, I almost went back to Winmo!!.
robrob777 said:
What I did since i installed my ROM with 380mb ram is to turn off all screen rotation settings, so far so good, I haven't notice any freeze or lag so far in any application or while waking the device up, I used to have it and I hate it, I almost went back to Winmo!!.
Click to expand...
Click to collapse
This was the first thing i tried but strangely it made no difference.
anyone know how to totally disable the g-sensor?
doesnt have any of the mentioned problems...
iron sight lite runs the same for me when i hold the phone portrait or LS...
have no bad screen sens while holding LS...
running mattc 1.5 with the default zimage...
thesweeney said:
This was the first thing i tried but strangely it made no difference.
anyone know how to totally disable the g-sensor?
Click to expand...
Click to collapse
I want to know too! disabling auto rotation doesnt mean completely stop the g-sensor running.
Bimme said:
doesnt have any of the mentioned problems...
iron sight lite runs the same for me when i hold the phone portrait or LS...
have no bad screen sens while holding LS...
running mattc 1.5 with the default zimage...
Click to expand...
Click to collapse
Please tell me....
Did you fresh install 1.5 or upgrade 1.4>1.5?
I had quite a few freezes on 1.4.
Then I upgraded to 1.5 and kept my apps etc from 1.4.
I HARDLY HAD ANY FREEZES AT ALL
Then I did a fresh install of 1.5 and started getting LOTS of freezes.
i did a fresh install.
i deleted all android files on my sd card and extracted the new build to a new made "Android" folder...
i use xanny roms, and i still have the robovoice problem, so i can´t use android daily...
i noticed on all android builds ive tried sofar, that the polling interval of the gsensor is very bad/small. U can see it when u go to calibrate the gsensor, the bubbles move very slowly...
this is not a big thing when u only use the gsenor to turn screen to LS, but it is essential to play games using the sensor...
thesweeney said:
DOH! Didnt know it was already a known issue LMAO
I'll get my coat....
Click to expand...
Click to collapse
Lol, no worries I'm glad that you pointed it out. This was actually one of those really useful threads and the kind of thing that the developers are looking for. I am not a dev but I speak with them pretty regularly when the same issue are pointed out time and time again by those who do not read the threads. This was something that has not been talk about here so I appreciate your well thought post and the information that you provided
I was just a step before creating a new thread about it when I saw this one.
This is definitely one of the things that are really pissing me off using Android.
Furthermore, I did tests on this issue for quite long to doubt that it's an autorotation related issue. Maybe it has something to do with the g-sensor, but it still would happen randomly even trying not to move the phone at all. I noticed that the problem wouldnt appear that often when decreasing the polling interval of set cpu and same time increasing the min. freq. to 380, but still, it DOES happen.
I'd really appreciate any statement on this, developer side of course.
I have the occasional screen freeze on landscape, but not very often using froyostone.
Bimme said:
i did a fresh install.
i deleted all android files on my sd card and extracted the new build to a new made "Android" folder...
i use xanny roms, and i still have the robovoice problem, so i can´t use android daily...
i noticed on all android builds ive tried sofar, that the polling interval of the gsensor is very bad/small. U can see it when u go to calibrate the gsensor, the bubbles move very slowly...
this is not a big thing when u only use the gsenor to turn screen to LS, but it is essential to play games using the sensor...
Click to expand...
Click to collapse
Cheers for that ^
+1 for the Gsensor polling intervals seeming very slow.
THIS CAN BE SEEN VERY CLEARLY USING THE 'VR TUNNEL' LIVE WALLPAPER.
Here the cubes move smoothly at a good fps while the tunnel moves around at what appears to be 4/5 fps.
ala380 said:
Lol, no worries I'm glad that you pointed it out. This was actually one of those really useful threads and the kind of thing that the developers are looking for. I am not a dev but I speak with them pretty regularly when the same issue are pointed out time and time again by those who do not read the threads. This was something that has not been talk about here so I appreciate your well thought post and the information that you provided
Click to expand...
Click to collapse
Hehe, Thanks for that ^.
I dont feel quite so stupid now
For a moment there, before I found out it was a known issue... I thought I had discovered the Androids very own penicilin or something equally as important... but as usual I was behind the times lol.
Jealousy said:
I was just a step before creating a new thread about it when I saw this one.
This is definitely one of the things that are really pissing me off using Android.
Furthermore, I did tests on this issue for quite long to doubt that it's an autorotation related issue. Maybe it has something to do with the g-sensor, but it still would happen randomly even trying not to move the phone at all. I noticed that the problem wouldnt appear that often when decreasing the polling interval of set cpu and same time increasing the min. freq. to 380, but still, it DOES happen.
I'd really appreciate any statement on this, developer side of course.
Click to expand...
Click to collapse
Possibly not related to autorotation per-se, but...
With Autorotation disabled... If I turn my phone on its side (with volume buttons pointing towards floor) I still experience freezes on my home screen or anywhere else for that matter.
Plus I have found that holding the phone VERY still in any position seems to eliminate 'ALL' freezing and lagging problems.
Do the G-sensor and the Dgital compass 'interlink' or communicate in any way? Is it possible that the screwed up compass output is screwing with the g-sensor output?
I ask this because the game 'hungry shark' thought that my phone was flat whent the usb port was pointed down towards the floor.
Dont know if that makes sense but for me it seems like the g-sensor is fubar as well as the digital compass.
trilbyfish said:
I then used even bigger and bolder letters to emphasize my points!
Click to expand...
Click to collapse
[SARCASM]Very helpful buddy[/SARCASM]
I did the font size thing for people who just wanted to skim through the long post.
thesweeney said:
Possibly not related to autorotation per-se, but...
With Autorotation disabled... If I turn my phone on its side (with volume buttons pointing towards floor) I still experience freezes on my home screen or anywhere else for that matter.
Plus I have found that holding the phone VERY still in any position seems to eliminate 'ALL' freezing and lagging problems.
Click to expand...
Click to collapse
Well ofc, it wouldn't freeze when it's COMPLETELY hold still, but I guess that shouldn't be the point of daily usage.
Now when it comes to spontaneous outside actions, you are trying to pick up a call using touchscreen cuz ur used to it or trying to shoot out a text in hurry, and your device will just go sleep for some time. I mean, how'd you hold still if you're moving (fast)?
If you ask me thats pretty much a major bug, not to forget the 3g data thing. I'm not moaning around, just want to attain more focus on this. I notice people losing themselves in some benchmark trolling - just time waste.
There is already a thread for that (walking dead)
Just found a possible solution, please repport if it is better for you too :
- boot windows mobile, calibrate the g-sensor in settings (i did it 2 or 3 times, but i don't think its important)
- do a proper shutdown of wm
- restart wm + android
Sent from my HTC HD2 using XDA App
After disabling "Auto-rotate screen" I haven't had a freeze yet, so good so far.

[Q] Turn off CRT gingerbread animation?

I'm using the Floyo 1.0 rom.
Is there a way to turn the gingerbread turn off animation off? I don't really like it plus I think it may be the reason why my phones screen sometimes just stays black and i have to do a battery pull ( it happens quite often). Also, sometimes it lags when i try to turn the phones screen on.
Thank you
AvrDroid said:
I'm using the Floyo 1.0 rom.
Is there a way to turn the gingerbread turn off animation off? I don't really like it plus I think it may be the reason why my phones screen sometimes just stays black and i have to do a battery pull ( it happens quite often). Also, sometimes it lags when i try to turn the phones screen on.
Thank you
Click to expand...
Click to collapse
you can turn it off only in cm7, try GingerDX, it's really good and smooth rom

Why does my DZ fail me when I need it the most

Now I love my DZ; it is by far the most capable phone I've ever owned, but it has this nasty habit of failing me whenever I seem to need it the most.
For example, today I was stuck behind a huge accident on the highway with an exit coming up in a few feet. I thought, "hey I'll just see if I can find a detour around it from this exit." Pulled out my phone and quickly launched google maps. right then, it completely stops responding to all touch input; the trackpad and physical buttons work fine, but nothing was registering on the touchscreen or capacitive buttons. I eventually had to pull the battery to fix the issue.
It just seems that these things tend to happen whenever i need to lookup something quickly on the phone (when im just screwing around on it, it works perfectly fine) be it completely not responding to touch input, or something weird happening like getting stuck between 2 homescreens, or the notification panel gets stuck halfway down, or massive input lag (5+ seconds) to the point of it not being usable.
And everything goes back to normal after a reset; but by then, I usually don't need to lookup whatever it was anymore.
The most frustrating part is that I can't seem to figure out whats causing it. I'm running virtuous 2.0.0 without any sense 3 additions, and I generally only have 1 or 2 tasks going on on the phone at once (usually just music player + whatever I'm doing). I originally thought it was just a performance issue, so I've increased the clock up to 1.5ghz (using daemon controller) but it hasn't has of an effect.
Any ideas on what else i can try?
Sounds like simple bad karma, I suggest donating to a charity or going to church
Other than that, I'd have no idea, sorry. Seeing as its not totally regular, there'd be no good way to easily pinpoint the issue. Maybe see if the rom produces a last_kmsg?
-Nipqer
makken85 said:
Now I love my DZ; it is by far the most capable phone I've ever owned, but it has this nasty habit of failing me whenever I seem to need it the most.
For example, today I was stuck behind a huge accident on the highway with an exit coming up in a few feet. I thought, "hey I'll just see if I can find a detour around it from this exit." Pulled out my phone and quickly launched google maps. right then, it completely stops responding to all touch input; the trackpad and physical buttons work fine, but nothing was registering on the touchscreen or capacitive buttons. I eventually had to pull the battery to fix the issue.
It just seems that these things tend to happen whenever i need to lookup something quickly on the phone (when im just screwing around on it, it works perfectly fine) be it completely not responding to touch input, or something weird happening like getting stuck between 2 homescreens, or the notification panel gets stuck halfway down, or massive input lag (5+ seconds) to the point of it not being usable.
And everything goes back to normal after a reset; but by then, I usually don't need to lookup whatever it was anymore.
The most frustrating part is that I can't seem to figure out whats causing it. I'm running virtuous 2.0.0 without any sense 3 additions, and I generally only have 1 or 2 tasks going on on the phone at once (usually just music player + whatever I'm doing). I originally thought it was just a performance issue, so I've increased the clock up to 1.5ghz (using daemon controller) but it hasn't has of an effect.
Any ideas on what else i can try?
Click to expand...
Click to collapse
although people say roms are 'stable' and can recommend these ROMs as "dd" (daily drivers) you cannot say that will be completely reliable. This is because when people say a ROM is 'stable', it's only after using it for 2-3days; unfortunately, roms gather clutter and begin to slow down over time. Not a problem for many flashaholics, but a problem if you're a one-rom kinda guy (or girl). So if you're not one-night-stand rom kind of person, here are some tips:
Reset your phone regularly. Phones start acting funny when they've been on for too long
Try stock ROM with addons flashed on top of it, rather than baked in a new rom
Most reliable roms i've experienced are Stock Gingerbread or CyanogenMod. Try those
If you are flashing a new rom, use SuperWipe, this can help get rid of clutter from old roms
skulk3r said:
although people say roms are 'stable' and can recommend these ROMs as "dd" (daily drivers) you cannot say that will be completely reliable. This is because when people say a ROM is 'stable', it's only after using it for 2-3days; unfortunately, roms gather clutter and begin to slow down over time. Not a problem for many flashaholics, but a problem if you're a one-rom kinda guy (or girl). So if you're not one-night-stand rom kind of person, here are some tips:
Reset your phone regularly. Phones start acting funny when they've been on for too long
Try stock ROM with addons flashed on top of it, rather than baked in a new rom
Most reliable roms i've experienced are Stock Gingerbread or CyanogenMod. Try those
If you are flashing a new rom, use SuperWipe, this can help get rid of clutter from old roms
Click to expand...
Click to collapse
Hmm, so you believe that this is purely a rom issue?
I havent run a stock rom for a while, but from what i remember the experience wasnt that pleasant, there was significant lag almost everywhere in the ui. Although i will admit that was back with froyo; i havent tried a stock gb stock rom yet.
Ill probablygive cm7 a go. Ive just grown so used to some sense features that its going to be hard for me to give them up (mainly recent apps in notifications, news widget, t9 dailer+manually linking contacts, and remote ring and forward on htcsense.com)
Has anyone had similar issues running virtuous sense 2.0.0?
As far as recent apps goes, long pressing the home button is a standard feature of android that brings up the most recent. Stock is the last 8 (I think) cm7 can show 15.
Sent from my HTC Vision using xda premium
Higher overclocking will make your phone LESS stable, not more. I'd stick around 1 GHz, as this is known to be very stable on most Z's, and usually does not result in any significant additional battery drain. OC may not have anything to do with your random hangs, but its probably not helping either.
redpoint73 said:
Higher overclocking will make your phone LESS stable, not more. I'd stick around 1 GHz, as this is known to be very stable on most Z's, and usually does not result in any significant additional battery drain. OC may not have anything to do with your random hangs, but its probably not helping either.
Click to expand...
Click to collapse
I'd agree. I really wouldn't ever go over 1.2ghz for a daily driver personally.
I run my ROMs at 800mhz lol, so I don't see the advantage of a huge overclock unless you're just bragging about benchmark scores.
its funny when u wanna show off your phone and you take it out of your pocket acting all cool and stuff and when u press the power button it wont wake up or you get a blank screen
haha its just bad karma for u like nipqer said
Try the stock pre-rooted gingerbread...I just flashed t last week and it is way faster than my froyo was, and amazing battery life, for me anyways, I do have an extended life battery though lol. Anyways as far as speed it is snappy on 800 mhz
Sent from my T-Mobile G2 using XDA App
redpoint73 said:
Higher overclocking will make your phone LESS stable, not more. I'd stick around 1 GHz, as this is known to be very stable on most Z's, and usually does not result in any significant additional battery drain. OC may not have anything to do with your random hangs, but its probably not helping either.
Click to expand...
Click to collapse
I've noticed the random hangs / glitches @ 800Mhz and 1Ghz, so I'm hesitant to say that the OC is the cause.
What do you use for stability testing? I've been running quadrant nonstop to test new OCs, but I don't think that benchmark stresses the cpu enough.
i am running Virtuous v2.0.0 w/ kernel unity v6 on it on desire z.
i've found bugs like
1/the top black bar ui, top left corner, some times i see the background wallpaper rather than the black bar. but it goes away if i pull down the notifications.
2/ the mail with microsoft exchange active sync, if i delete the mail it will automatically resync and downloads all mail including the on i deleted. but i got around that by using pop/imac instead.
all rather minor as i got ways to go around it.
i did have a similar issue where the touch screen goes unresponsive and i had to force close it, restart phone to get it back alive. but then i readjusted the clock speed and never had it happened again.
the phone is at around 825mhz with governor smart ass on wake time max, unless im watching 720p movies on the phone then i ramp it up at 1.4ghz.
sleep time on 368mhz max with governor at conservative.
i had it on like this since 11/09/11 (as i made a rom backup) and it never occured yet.
swinderz said:
i am running Virtuous v2.0.0 w/ kernel unity v6 on it on desire z.
i've found bugs like
1/the top black bar ui, top left corner, some times i see the background wallpaper rather than the black bar. but it goes away if i pull down the notifications.
2/ the mail with microsoft exchange active sync, if i delete the mail it will automatically resync and downloads all mail including the on i deleted. but i got around that by using pop/imac instead.
all rather minor as i got ways to go around it.
i did have a similar issue where the touch screen goes unresponsive and i had to force close it, restart phone to get it back alive. but then i readjusted the clock speed and never had it happened again.
the phone is at around 825mhz with governor smart ass on wake time max, unless im watching 720p movies on the phone then i ramp it up at 1.4ghz.
sleep time on 368mhz max with governor at conservative.
i had it on like this since 11/09/11 (as i made a rom backup) and it never occured yet.
Click to expand...
Click to collapse
I've been playing with the wake min and wake gov settings the past few days. I have it set at 600Mhz min, performance gov; I haven't noticed much difference in the battery life, but I'll have to do more extensive testing to be sure.
Performance feels slightly better, especially after a fast wake. can anyone give a detailed explanation of the behavior of the different gov settings? I can't seem to find much info on it.
makken85 said:
I've been playing with the wake min and wake gov settings the past few days. I have it set at 600Mhz min, performance gov; I haven't noticed much difference in the battery life, but I'll have to do more extensive testing to be sure.
Performance feels slightly better, especially after a fast wake. can anyone give a detailed explanation of the behavior of the different gov settings? I can't seem to find much info on it.
Click to expand...
Click to collapse
http://www.droidforums.net/forum/droid-hacks/21309-setcpu-1-4-6-what-cpu-governor-options-mean.html

Wake Lag?

I've noticed this problem from the day I got my phone (10/10/13). I'll experience a full second or more of lag when trying to wake the phone by hitting the home button or the power button.
It's pretty bad, so much so that I sometimes think I may have missed the button and go for it again.
Is this common? I've searched online and I haven't found anything about the Note 3 but I see stuff about it happening on the previous Note.
One thing u can try that made speed things up slightly is to go into developers options and turn off or change the transition animation scale, Window animation scale and Duration animation scale. It won't brake anything and it just may help a little. The default setting for each is a 1 so I'd either change em all to a 0.5 or turn em to off. And hell, if u don't think it helps you can always change em back. Worth a shot at least.
Sent from my SM-N900V using Tapatalk
Ibkevin said:
One thing u can try that made speed things up slightly is to go into developers options and turn off or change the transition animation scale, Window animation scale and Duration animation scale. It won't brake anything and it just may help a little. The default setting for each is a 1 so I'd either change em all to a 0.5 or turn em to off. And hell, if u don't think it helps you can always change em back. Worth a shot at least.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Nice tip. In all my years of Android tweaking, I've never come across that one. I don't need fancy screen on/off animations. I prefer quicker response time. Thanks.
This phone is fast enough to where you should be able to do screen on animation with no lag. I'd try wiping cache before disabling anything
Sent from my SM-N900V using xda app-developers app
noticed too
sintricate said:
I've noticed this problem from the day I got my phone (10/10/13). I'll experience a full second or more of lag when trying to wake the phone by hitting the home button or the power button.
It's pretty bad, so much so that I sometimes think I may have missed the button and go for it again.
Is this common? I've searched online and I haven't found anything about the Note 3 but I see stuff about it happening on the previous Note.
Click to expand...
Click to collapse
I have noticed this too... bugs the hell out of me. i tried putting animations to .5 cause i think it makes the phone look like crap when set to 0, helped a little bit but it is still there.
I noticed this last night. I was missing the swipe to unlock because it was taking so long. Seems ok now, though.
I found a slightly faster response with the three animation options set to 0.
I think its a touchwiz thing my s4 did it stock and it went away with Hyperdrive rom but it came back when I was on cynanogen mod. I feel like my I wore out my power button lol it is a little loose.
Sent from my SCH-I545 using xda app-developers app
Its a Samsung thing with the processor. The Note 2 was the same way. The easiest way explained to me awhile back....once your screen goes off...and all stuff running finishes up...you essentially enter Deep Sleep. It's a battery saving feature...if you will.
Manually turn off your screen, then like..2 seconds later, turn it back on. Should be virtually instant. Now do the same thing but wait 2 minutes....lag.
It is 'kind of' annoying, but I'll deal with it for the sake of battery life.
Now that we have root, you can always try to adjust governors and kernel settings to help it, but until we're able to use other kernels, it's gonna pretty much always be there, the lag, that is.
Hope that helps explain a bit.
The only way around it on the Note 2 was to force a wake lock, basically it never enters deep sleep. You may be able to use an app to do it as well, such as: https://play.google.com/store/apps/details?id=eu.thedarken.wl
MikeyXDA was an advocate of the method and explained it really well on his MeanBean ROM for the Verizon Note 2. You just take a slight hit to battery, but at least there's no wake lag.
Here's the thread: http://forum.xda-developers.com/showthread.php?p=543135
Sent from my SCH-I605 using XDA Premium 4 mobile app
I have absolutely no wake lag on mine at all. I was expecting it like my Note 2 but I hit the button now and it's just on instantly.
Wake lag with sd card
sintricate said:
I've noticed this problem from the day I got my phone (10/10/13). I'll experience a full second or more of lag when trying to wake the phone by hitting the home button or the power button.
It's pretty bad, so much so that I sometimes think I may have missed the button and go for it again.
Is this common? I've searched online and I haven't found anything about the Note 3 but I see stuff about it happening on the previous Note.
Click to expand...
Click to collapse
I'm having a problem with wake lag bad sometimes - several seconds. Mine seems to be connected to the sd card. I have a 32 gb card I used in my note 2 with no problem, it's and sdhc i think. I cleaned it down to 8g of stuff on it and put it in. It kept causing note 3 to dis mount the card each time I turned it on; had a little message at the top left. Much of the time the card would stay dismounted. When I finished a call the screen would not come back on for a long time, couldn't end the call. Took the sd card out, problem resolved. Backed up the sd card, put it in the N3 and formatted. Got better results although still doing it some. I'm wondering if I'm going to have to get a new sd card or trade in for a new note 3.
Any thoughts. I would check the sd card if you still see long lags.
Try to freeze/remove S Voice if you rooted because S Voice is mapped to double tapping the home button. This helped me out a lot on the Note 2 and I removed it already on the Note 3 without comparing lag difference already

[Q] Turn off CPU status notification

I just installed the latest (( ROM )) Sacs Custom 4.3 Rom 1-26-14 V5.5 ultra onto my GS4 and I love the ROM. I love the ROM and only have one complaint and I'm hoping it will be easy to resolve. There is a nearly constant display of CPU usage in the left side of the Notification panel. It is flashing numbers about every 5 seconds. When I open Notifications I also see a small bar just below the widgets that displays status for CPU0-CPU3. I assume the two are related.
Anyway, I want to turn it off since it crushes my battery display, burns through my battery faster, and is generally annoying. I have not been able to find a way to disable this...feature. I don't see it in Pimp My Rom although I am wary to mess with anything in there.
Can someone please tell me how to turn this off. It's driving me crazy.
Thanks,
S

Categories

Resources