Related
Hi been looking everywhere on this site and all over the net and I cant really find any themes that fit my samsung omnia which has wqvga resolution. Can someone please help me find some as I really want some of the really good themes on this board but I dont know which ones fit wqvga.
thanks
Hello my friend :]
These are some themes specially designed for samsung omnia that
Supports Resolutions:
QVGA (240x320)
WQVGA (240x400)
VGA (480x640)
http://www.imarche.net/omnia/
===================
Installation Instructions:
-------------------------
1) If you haven't installed mobile shell before, skip to step 2.
Run UnInstall.mscr to REMOVE the previous version (this will completely remove the
'SpbMobileShellSkins' folder from your "My Storage" / "Storage Card".)
2) Extract the .zip file into the root of your desired storage location.
3) Using your device, open File Explorer and find your desired installation
location (as above). Go to 'SpbMobileShellSkins\Scripts'. In here run the
file 'Mortscipt.exe'. This will enable the other scripts to run.
4) In File Explorer, run the file "Install_WQVGA.mscr"and set your LANGUAGE.
5) You will notice 28 other scripts like Luna_Paper.mscr. Each time you run
one of these, when you go to SPBShell/Programs/Tools/SBP Skins a new skin
will become available. If you want all 28, then run all 28 scripts.
Check the website for screenshots.
6) SOFT RESET the device or run the script "ScanStatus.mscr".
Having trouble?
- If all goes wrong, or you don't like the new skins, you can revert to
the original skin by running the 'Orignal.mscr' script!
- If the link into the Spb Skins sub-menu doesn't work, CREATE IT AGAIN
tapping on the relative .mscr script from the Scripts folder.
==========================================
TIP : you can perform a system format incase something goes wrong with your omnia by switching the phone on while holding both call and end call . This will allow you to format the device and go back to initial setting like the first time you switched your omnia on.
ok thanks but how come all the people on here that are making class themes dont make em for wqvga aswell?
first: a skin for what ???
second: omnia is new and the only phone with that resolution and making a skin needs many days of work. so why should anyone do that for one percent of the users for free?
first: why are u having a go im only askin
second: the phone has been out for months and this is a place littered with wm themes so im askin if theres any for omnia and why there isnt
third: get over yaself
whats your problem ?
i just asked you for what application you want a theme/skin because you wrote nothing about it. and then i answered your question why there aren't so many out. so please dont post here anymore if you have a question or need help noob.
bad..
the first three posts and what an awful behaviour....
First while there is a wealth of WM information on this forum just remember at the end of the day this is a HTC Forum, not a Samsung Forum.
With that said, I'm a omnia user as well and I would suggest you check out some other forums like Modaco as they have a specific forum for Omnia and you will find more information you might be looking for there.
There will be some discussion on xda forum and I make it a habit to keep in touch with several forums as to broaden my knowledge base.
bobsbbq said:
First while there is a wealth of WM information on this forum just remember at the end of the day this is a HTC Forum, not a Samsung Forum.
With that said, I'm a omnia user as well and I would suggest you check out some other forums like Modaco as they have a specific forum for Omnia and you will find more information you might be looking for there.
There will be some discussion on xda forum and I make it a habit to keep in touch with several forums as to broaden my knowledge base.
Click to expand...
Click to collapse
Hi friend, which one is newer H1 or G4?
And if you could spare a moment to tell me abt the difference/improvements of the SW.
Thanks in advance
Juan83 said:
Hi friend, which one is newer H1 or G4?
And if you could spare a moment to tell me abt the difference/improvements of the SW.
Thanks in advance
Click to expand...
Click to collapse
The H1 is newer, but HI3 is the latest with many improvements see here:
http://www.modaco.com/category/342/i900-omnia-http-i900-modaco-com/
hi
thanks for that, but my omnia doesnt seem to be able to actually apply the settings.
would u know why it would be doin that?
thanks
http://www.modaco.com/content/i9x0-...e-dialer-pin-dialer-taskbars-wmp-player-more/
http://www.modaco.com/category/342/i9x0-omnia-http-omnia-modaco-com/
http://www.modaco.com/content/i9x0-omnia-http-omnia-modaco-com/275395/new-customized-omnia-menu/
I am facing this unique problem after i upgraded to official Windows 6.1 ROM.
Whenever i am in explorer/ Programs and I want to select a certain entry I hit the screen, the page scrolls rather than the entry getting selected.
I am earlier ROM (Windows 6.0) i had no such problems.
I have performed the screen orientation several number of times, but even after that it is the same.
Is there some setting that will prevent this behavior?
Thanks in advance
The same happens in Pocket IE also
Same problem with my elfin 6.1, ROM 3.07.720.03 WWE.
I too have the same prob..it hapens in all scrollable screens, like sms list, contacts etc., any fix???
am I,
the same problem..
Any updates?
Has anyone found a fix for this issue
I've found this thread
http://www.htcwiki.com/thread/869653/HTC+Touch+Screen+Alignment+issue?t=anon
but it semmes doesn't work for me
I've tried some PDAVIET wm 6.1 rom and...
the latest rom that works fine with my elfin is TOUCH WM6.1 ROM V60 (BLUE & BLACK VERSION) - Build 20758.1.4.1 (Manila2D):
After v62 all the roms are "build" on RUU_Elfin_hTC_Asia_India_3.07.720.03_4.1.13.71_03. 34.90_BLUE_Ship
and I think that this is the problem...
up!
Anyone has a solution to this?
maby it's a hardware (touch screen) problem?
maby the latest wm6.1 rom are more touch sensitive than the previous one?
WM 6.5
I've also tried pdaviet wm6.5 but there is the same problem....
Search for "butter finger fixed"
dsixda said:
Search for "butter finger fixed"
Click to expand...
Click to collapse
I LOVE YOU!!!!!!!!
That's work for me, with wm 6.5 pdaviet!!!
I've found two solution in my search resoults.
The first is Changing touch.dll at this post http://forum.xda-developers.com/showthread.php?p=2888346&highlight=butter#post2888346
The second one is to change the pagehigh and pagelow value in registry http://forum.xda-developers.com/showpost.php?p=2888073&postcount=78 .
I've only tried the second one without changing the touch.dll file, and it works fine!!
Thank's a lot friend!
Bye
ciuspo said:
I LOVE YOU!!!!!!!!
That's work for me, with wm 6.5 pdaviet!!!
I've found two solution in my search resoults.
The first is Changing touch.dll at this post http://forum.xda-developers.com/showthread.php?p=2888346&highlight=butter#post2888346
The second one is to change the pagehigh and pagelow value in registry http://forum.xda-developers.com/showpost.php?p=2888073&postcount=78 .
I've only tried the second one without changing the touch.dll file, and it works fine!!
Thank's a lot friend!
Bye
Click to expand...
Click to collapse
Changing simply touch.dll will not work, you'll need to change Biotouch.dll as well because sometimes you'll get random program shutdowns while scrolling (another butter finger issue). The latest Onyx ROM for 6.1 has the fix already.
anybody can help me?
I can't find old touch.dll . . .
thx
Virage said:
anybody can help me?
I can't find old touch.dll . . .
thx
Click to expand...
Click to collapse
All the new ROMs all have the fix for this.
You can try to dig down and search for the onyx xda thread.
jeremy89632 said:
All the new ROMs all have the fix for this.
You can try to dig down and search for the onyx xda thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=426540
I found that thread . . .
Is it right?
Is it the final version?
thanks . . .
Bingo!
Cheers!
Did anybody succed to run this on HTC Elf ?
It starts , shows in the right corner "INIT API" then closes .
Thanx !
I have this problem too.
I don't know if the problem was the rom, i don't know. My solution was to install a preview release of IGO8.
my IGO 8 that works fine is NAV N GO IGO 8 8.0.0.41506 of dat June 3 2008~
with the new maps
Until now it works fine. only the maps not are actual.
Try to find this . If you can't download from here:
MOD EDIT....PLEASE DON'T POST WAREZ.
the language is in Portuguese but you go like this:
Opções-> Regional and the find english
Joaomac7
http://forum.xda-developers.com/showthread.php?t=395651
You can see here people that have the same problem.
Joaomac7
Hi everybody
First ,i'd like to thanks all this community ( cookers and everyone ) for this very usefull forum
Since SSPL is out , i tried about every cooked roms for Leo and they worked fine exept the compass . When i launch compass i have only the compass but cannot use it to show me the direction .Normaly at the bottom you can choose a location and then you have a green spot on the compass that show you the direction .On almost all rom compass can not be use , choose location is not there ? exept on TOPIX roms where it work very well .
I tried to look for this issue on the whole forum but unfortunatly find nothing ..
TOday i'm stuck with TOPIX roms ( very good rom also) because of that issue .
Is there a way to reactivate compass use ?
thanks
Best regards
K
Ps : sorry for my bad english ...
Good observation. I was wondering when anyone would post about this issue.
Same here. Hope the Chefs will find out too and adapt the Compass.
It was one of the cool features on the stock ROM, to be able to get a directional
heading for a destination in conjunction with Google Maps.
Try installing this .cab file: http://rapidshare.com/files/304246293/Duttys_Digital_ComPass.cab
The "Set Destination" works well in my ROMs.
thanks !!
hi
So thank you , i'm not alone with this issue .
I wait next flash and will tell you if the cab work .
thank you for yur quick answer and keep the excellent work off this great community
wish you a happy new year to all
regards
K
You don't have to wait for your next flash, the cabfile provided ny freyberry works.
It only leaves two icons in the program list, but who cares. They now both start the
correct compass.
+1 for the community...again.
You can easily remove icons from the start menu. Just open File Explorer and go to \Windows\Start Menu\Programs, there you can remove (or add, or reorganize) links.
Hi
i reflash with another rom with compass issue , and test the cab provided
It work !!! i have the "set destination " but unfortunatly i cannot use it , no green spot for direction
i can choose location in google but not showing on compass.
never mind , hope it will be fix asap by the excellent cookers in da community
thanks
Can anyone upload the Duttys_Digital_ComPass.cab to a mirror as rapidshare is being a pain as usual!
My custom ROM is Sense-less and compass doesn't run.
Anyone lucky to run Compass without Manila framework?
Answering myself (I luv this forum )
Compass is happy to go with 2 Sense modules and 1 reg entry.
lua.dll
mode9.dll
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila]
"HashPaths"=dword:1
djet said:
Answering myself (I luv this forum )
Compass is happy to go with 2 Sense modules and 1 reg entry.
lua.dll
mode9.dll
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila]
"HashPaths"=dword:1
Click to expand...
Click to collapse
Nice,
Thanks for sharing this tip.
Franck
Is there any way to get the compass to work in google maps iphone style?
Need Manila Files
Hi!
I am currently using a Energy Rom without the needed Manila files, for the compass to work.
Can someone please tell me how to get this to work?
And can someone please upload the two needed dll files (mode9.dll and lua.dll)?
Will this even work?
Thank you!
@Op, good find indeed, thank you.
I will fix in my next rom updates.
neo123451 said:
Can someone please tell me how to get this to work?
And can someone please upload the two needed dll files (mode9.dll and lua.dll)?
Click to expand...
Click to collapse
no one?
neo123451 said:
no one?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=5474175&postcount=8
But it's not very recent.
FFBOY'S ROM WM6.5 21914+Manila20161332 ROM with Radio Version 5005.1700.05
Credits to:
thx to my friend 风中游 who by me the TG01!
cedesmith,thx for ur great tool so that i can start cooking
TXH TO Chainfire's D3M drivers..
thx Baly23 for his HTC SKINED SYWPE
DFT support the resources
AND ALL OTHERS THAT HELP MY WORK
Changelog
1.change sys&xip to 21914
2.change HTC TASKMANGER TO XTASK,hope u will like it
3.add back some toshiba apps.
4.change backgroud of system
5.deleted CHOME
6.fixed music tab issue and some other issues..i can't remember well
7.may still have little bugs, also hope u can find for me
Manila 2017 still got some problem in change lang to WWE.. i will work on it!
may be release 22036 next few days
----------
1.Base as my 21908 clean rom,add Manila20161332.On boot RAM 66.3MB,ROM 236.11
2.deleted other Toshiba softwares except Photobase,VideoEditor,MMS
3.delete autokeylock as default ,u can enable it by "Start Menu"-"TOOLS"-"EnableAutoKeylock"
3.add HTC skined SYWPE slide touch input.
4.change iocns of folder in startmenu
5.u can change software binding of camera botton now
6.changge Programme GPS port to COM7
7.Use default WM style SMS client to reduce memory use
Knowing bus
1.when press"slideshow" on Picture&Video TAB,HTC ALBUM can not display right,the screen turns to full black.u can exit by "Home" or "Back" key.
2.Setting page in Weather Tab can not be selected,hope u can find solutions.
3.waitting for ur bug report!
Download:
21914+2016
--------------
TG01 WM21908+Manila20161332.rar
sorry for the chinese web storage..
download steps:
step1,click this
step2,click these donwload links
Screen
Sorry..find some little bugs
fixing...
wow I'm realy happy to see your new rom !!
Thx
Awesome finally a new ENGLISH sense ROM
I think SYWPE slide touch is not the best. I like FirgerKeyboard better.
released
2 little bugs
hope u can find solution so i can fix them!
enjoy
ffboy2009 said:
released
2 little bugs
hope u can find solution so i can fix them!
enjoy
Click to expand...
Click to collapse
hey ffboy,
Download speed is too low, ROM request: ORG TG UK ROM with all toshiba apps with coreplayer. but remove orange maps, help video nd other wallpaper update RADIO.
If possible add sense 2.5 2016, which is vga but full raw available on net.
thankyou.
harisharun said:
Download speed is too low
Click to expand...
Click to collapse
300k/s dl I thinks, it's so bad for free upload...
only 45 mb free ram??...
GPS does not work! As in the firmware without Manilla.
Installed GpsModDriver. In EXTERNALGPS update data. Run IGO. He sees the GPS module and satellites. Specifies the location in less than a minute. And as soon locates the GPS module hangs. The same thing happens with the Garmin. Once the module is hung, restart the software does not work - shows that the GPS module is connected, but no satellite can not see! Only helps the Soft Reset. The problem is hovering GPS module after determining the location!
PS The firmware series 23 .... no such problems. GPS works well.
mario_psy said:
only 45 mb free ram??...
Click to expand...
Click to collapse
I'm working at Manilla, Inesoft Phone and S2U2 ~ 60 mb
Nice to have a new sense rom, thanks!
SD download failed.... why ? .... anyone can tell me ? thx
DutzuSv said:
SD download failed.... why ? .... anyone can tell me ? thx
Click to expand...
Click to collapse
You HAVE to use SDDL+
great rom indeed
only lacks ram, but this is a problem already known
just a suggestion and many already said so: your 6.1 with sense would be great as it has a huge amount of ram
InsertNameHere said:
You HAVE to use SDDL+[/URL]
Click to expand...
Click to collapse
I'm use SDDL+.... and I rename the rom to "TG01WP_00.tsw" same... SD Download Fail
Downloaded file without extension is RAR archives. Rename the downloaded file to RAR and extract the firmware from the archive.
kozar said:
Downloaded file without extension is RAR archives. Rename the downloaded file to RAR and extract the firmware from the archive.
Click to expand...
Click to collapse
BIG thx man
iceeyes91 said:
great rom indeed
only lacks ram, but this is a problem already known
just a suggestion and many already said so: your 6.1 with sense would be great as it has a huge amount of ram
Click to expand...
Click to collapse
+10000001010! 6.1 and sense
kozar said:
GPS does not work! As in the firmware without Manilla.
Click to expand...
Click to collapse
Radio 1600.05 has disconnection problems, i never use it, i always change to a better radio. Unfortunately for experimenting reasons i mixed this rom with radio 5001.0300.76 only to find out that it also has disconnection issues. Call quality is quite good though.
By the way, WoW, this new sense is blazingly fast! faster than both previous versions i've tried. As for ram, you could leave out the manilla phoneskin, that could give you about 6-10mb more, but then again it is too beautifull and practical to leave it out and it wouldn't really be sense without it