Database Users

MDA goes nuts after woken from sleep

Hello.
I have a T-mobile Mda and yesterday it began to do wacky things:
When I press the power button to wake the device from sleep, the phone volume balloon pops up and all the indicators go down. As if somone is holding the "down" button and not letting it go. When I manually change the volume, it goes back down again. When I press "start menu" it shows up for a second and then disappears. It seems as if the buttons are stuck, but they can't be. I did not drop the phone nor there was any physical damage done to it.
When I press the big "select" button the problem seems to go away, but resurfaces when the device goes to sleep and then back from sleep.
What could possibly cause this and how to fix it?
Thanks!

natan said:
Hello.
I have a T-mobile Mda and yesterday it began to do wacky things:
When I press the power button to wake the device from sleep, the phone volume balloon pops up and all the indicators go down. As if somone is holding the "down" button and not letting it go. When I manually change the volume, it goes back down again. When I press "start menu" it shows up for a second and then disappears. It seems as if the buttons are stuck, but they can't be. I did not drop the phone nor there was any physical damage done to it.
When I press the big "select" button the problem seems to go away, but resurfaces when the device goes to sleep and then back from sleep.
What could possibly cause this and how to fix it?
Thanks!
Click to expand...
Click to collapse
Since this just begun happening, it sounds like recent software you installed is corrupted and causing this. If you did install software just prior to this, uninstall the software then power off and on your device.

im having the same problem with my volume control going haywire, and random letters being displayed on the screen. but this happened after, which i now realize was an incomplete upgrade crossbow cause my device was cid-locked. i followed the "g4 hard spl (cid unlock)" topic, then upgarded to the "touch" rom, but i still get the same problem. any insights?

'Do a Hard Reset' of the phone,although you'll loose all your personal data,contacts messages etc...,but phone will reset to default settings and erase all corruptions,otherwise do a reflash.
Cheers !

i tried doing a "hard reset" but it wont work. the screen says to push the 'send' button, but when i do the button doesn't respond. so i tried a reflash but im still getting the same problems. do i need to reflash to an older rom, then upgrade again? if so, where can i get an older rom version, or perhaps the qtek 9100 original rom?

so i undid the hard spl lock, and reflashed my phone with the vodaphone qtek 9100 rom package. everything seems fine when the battery is full, but as the battery power goes down the problems become more frequent. the phone thinks buttons are being pressed, ala the lights on the keys are on, the volume constantly goes up and down, contacts open. can anyone help me? i dont know what left to do

Me too, it is if the down button is being held down.

need to bumps this thread. really need some help to fix this. its really frustrating me

two weeks and still no progress
someone? anyone? guide me and any others who are having this problem in the right direction. dont want to give up this phone, i really like it.

Same problem over here
Is you’re problem fixed or still the same... My phone is doing exactly the same.

my phone is still not working properly. cant find any solutions

Soft buttons on my wizard are not working / mixed up / display letters

Recently I am having problems with my phone, and am wondering if it is a software or hardware problem.
I have tried loading the TNT4 rom & WS5SE roms (this is a g4), and there is no change (im on the Tnt4 one now).
The touchscreen works okay, but the soft key buttons do not. The right bottom one is okay, the left one triggers the right one, the send button show the letters "uytga" on the phone screen when i press them, the end button shows "mn" or something, the camera button works perfect, the comm manager button is the same as the voice button (even when i map it with a program it says "button 4").
It even happens on the soft keys on the keyboard when i slide it out.
Also I used Start-sSPL to put the roms on. Is there a way I can get the OEM one back on or fix the button problem?
Any help will be appreciated.

Hardware button failure

For a while now I've had problems where all the hardware buttons on my 8125 do not function properly. Specifically, the IE button doesn't start the browser, the messaging button doesn't start the messaging app, the phone buttons don't start the phone app, etc...
The camera button occasionally works to start the camera program but stops working after that first press. All the other buttons, including the slideout keyboard do not work at all, with the exception of the volume button, as noted below.
Another symptom is that the volume button, if I forget it's broken and push it by accident, will cause the volume app to popup and try to adjust itself up or down repeatedly. It's obviously thinking the button is stuck.
I know this has got to be a software problems since they all failed at the same time. Does anyone have any idea what might cause this problem and how I might go about troubleshooting it?
I have done a hard reset twice to no avail. The phone was literally 30 days out of warranty when I first reported it to Cingular/AT&T and they wouldn't cover it.

Re: Hardware buttons
Bump. Anyone got any ideas? I can't be the only person that's had this happen.
I just finished flashing the ROM so I went from 1.08 to 2.25 and still no joy.
Earl

[Q] Making touch keys less touchy/easier unlock

Annoying Touch buttons
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper

Never been an issue for me, although i was anticipating problems with no hardware buttons its been fine...

Pepper90 said:
I think that the most DHD users have the same problem, touching the buttons at the bottom if you really dont want to.
So my question is if it would be possible to change the "Home" or the "Menu" button (pushing long) from "last used apps" to "turn on/off the touch keys???
that would be awsome
thx Dr.Pepper
Click to expand...
Click to collapse
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.

iam the only one who has the problem that he accidently hits a touch key while using the phone or playing a game? every little contact triggers the keys. i.e. if i use the thumb to type a message, holding the phone in the right hand, i sometimes trigger the search key.
my idea is to make it harder to trigger these keys. as they are part of the touchscreen, it sould be possible to do anything that can be done with the touch sreen. my ideas:
1. double-touch; tapping the key 2 times (like a double-klick) triggers it once
2. sweep; i.e. you touch the home-button and sweep out of it, then release. can be even harder with sweeping out and back in.
3. circle-touch; making a little circle over the button triggers it.
other ideas welcome.
---------------------------------
2nd problem: easier unlocking;
i feel it sometimes tricky to unlock the pone, wich is done by pressing the powerbutton at the top of the phone and sweeping on the bottom of the screen. the phone is'nt very small (or i have small hands). if iam holding the phone at the bottom, i can nearly reach the whole touch area with my thumb, but to unlock, i need to use my 2nd hand or to juggle the phone so i can reach the power button with the right hand. with the G1, which had a menu button at the bottom, it was just double-pressing that button and the phone was unlocked. iam looking for a similar easy way to do it.
its just annoying to take the phone out of the pocket and use both handy or juggle around to unlock it...
i dont know it it wastes additional energy to have the touchscreen active, so it can be used to unlock the phone. so my ideas:
1. use the touchscreen to unlock; i.e. draw a pattern, press the bottom key in some order (home, back, menu to unlock)
2.1 use the volume keys. if the screen is disabled, they are used to change the audio volume (or is that only the case, if music is playing?) When holding the phone at the bottom with the right hand, the volume-down hey is easily reachable. so you can do volume-down (which activates the screen) and then slide on the screen like you would do if you have pressed the power button. pressing volume-down with deactivated screen does not change the volume, but pressing it twice does (i.e. 1st press unlocks the screen and 2nd press takes volume down).
2.2 press vol-up and vol-down at the same time to unlock the phone. if i do that the phone vibrates sometimes, no idea why.
3. use acceleromater (or a other sensor?) to unlock, i.e. shaking the phone in a special way (i.e. a circle), activates the screen, so you can unlock it by sliding on it. also full unlock by shaking a phone could be possible (also known as kung-fu-unlock )
other ideas also welcome.

Proximity sensor for unlock when taking it out of the pocket :-D. I have the same problem as you so a 'fix' would be nice

yeah, you take the phone out of the pocket and it unlocks and says "hello raw, how you are doing?".
but that would be nice. question is if constantly checking the prox sensor would drain the battery much. it needs to be checked every 3 seconds or so.

lynxboy said:
Can't help but say, "you're holding it wrong!"
Seriously though I've never encountered this problem on either this phone or my N1 which has a smaller screen.
How exactly are you managing to press the buttons by mistake?
Regards.
Click to expand...
Click to collapse
if i try to use the phone with one hand

seems like here (http://forum.xda-developers.com/showthread.php?t=854073) is another user with that problem.

same problem: http://forum.xda-developers.com/showthread.php?p=9550179#post9550179

Merged threads as topic is similar....
Cheers,
M_T_M

[Q] Touchscreen not working on lock and reset screens

In the last couple of weeks, when the pattern lock screen is displayed, it intermittently doesn't accept touch input. If I power off and on the screen quickly, it then accepts touch input fine.
Similarly, if I press and hold the power button (with the phone on), it brings up a "Phone Options" screen, with options for Silent, Airplane, Profile, Reboot and Power Off. Touch input does not work at all on this screen. I'm working around this by using the Quick Boot app.
Otherwise, touch input works fine, so I don't think it's a hardware problem.
I've seen something similar when Google Nav gets in front of the lock screen. Touch doesn't work until I power off and on the screen, and enter the lock pattern. Could something invisible be getting in front of the lock and power screens?
Using Pongster's HyperDroid-GBX-v12 (2.3.3).

Hey there,
Maybe the ROM h doesnt function properly on your device. Try shifting to another rom. All are equally amazing. If you do not want to shift, try running task29 and start the process all over again

SheenaIsAPunkRocker said:
In the last couple of weeks, when the pattern lock screen is displayed, it intermittently doesn't accept touch input. If I power off and on the screen quickly, it then accepts touch input fine.
Similarly, if I press and hold the power button (with the phone on), it brings up a "Phone Options" screen, with options for Silent, Airplane, Profile, Reboot and Power Off. Touch input does not work at all on this screen. I'm working around this by using the Quick Boot app.
Otherwise, touch input works fine, so I don't think it's a hardware problem.
I've seen something similar when Google Nav gets in front of the lock screen. Touch doesn't work until I power off and on the screen, and enter the lock pattern. Could something invisible be getting in front of the lock and power screens?
Using Pongster's HyperDroid-GBX-v12 (2.3.3).
Click to expand...
Click to collapse
Have you read the thread about the unresponsive touchscreen, where pressing hard on the end call button fixes the screen touch? I assume your problem is in essence the same; once you press it hard enough to actually unlock the screen the touch works fine.

Nigeldg said:
Have you read the thread about the unresponsive touchscreen, where pressing hard on the end call button fixes the screen touch? I assume your problem is in essence the same; once you press it hard enough to actually unlock the screen the touch works fine.
Click to expand...
Click to collapse
That probably is what the problem is. Btw to everyone, I haven't noticed a difference in pressing it really hard, I noticed that pressing it a lot of times does the trick
Sent from my HTC HD2 using Tapatalk

Thanks for the feedback. I don't think it's the ROM, been using GBX-v12 since it was released, and previous versions before that.
The symptoms do seem similar to the other thread, but others report it on many screens. I only get it on the lock and reset/power screen. Otherwise, it works fine. However, those screen are brought up after pressing the power key ...
I suppose if it is hardware, then it's likely that cable issue. If it's software, then a reset should clear it, so I might try an ICS ROM from scratch first.

SheenaIsAPunkRocker said:
Thanks for the feedback. I don't think it's the ROM, been using GBX-v12 since it was released, and previous versions before that.
The symptoms do seem similar to the other thread, but others report it on many screens. I only get it on the lock and reset/power screen. Otherwise, it works fine. However, those screen are brought up after pressing the power key ...
I suppose if it is hardware, then it's likely that cable issue. If it's software, then a reset should clear it, so I might try an ICS ROM from scratch first.
Click to expand...
Click to collapse
I guess i shoulda commented that how my digitizer began acting, it only did it while in the power menu but after a couple days it started doing it while just hitting the power button to put it to sleep, so i remapped my green phone key to be the power button

elesbb said:
I guess i shoulda commented that how my digitizer began acting, it only did it while in the power menu but after a couple days it started doing it while just hitting the power button to put it to sleep, so i remapped my green phone key to be the power button
Click to expand...
Click to collapse
Thanks for the tip. You're right about the symptoms getting worse, it now occasionally stops working on other screen
I'm using any button but power to turn on the phone. To turn it off I've added "Go to sleep" to the notification widget bar, which I assume is the same as pressing power??
Not quite as user friendly and sometimes I forget not to use power off, but it'll do for now!

SheenaIsAPunkRocker said:
Thanks for the tip. You're right about the symptoms getting worse, it now occasionally stops working on other screen
I'm using any button but power to turn on the phone. To turn it off I've added "Go to sleep" to the notification widget bar, which I assume is the same as pressing power??
Not quite as user friendly and sometimes I forget not to use power off, but it'll do for now!
Click to expand...
Click to collapse
Yes that will work! I used it cause I got lazy and didn't feel like changing the key file but it's much easier to use the green call key instead of the notification power widget
Sent from my GT-I9100 using Tapatalk

Try this:
Lock the screen normally, screen turns off.
To turn it on again by pressing any other screen buttons other than the power button.
I found that if I do it this way, the screen runs normal.