my flipout touch screen is not responding until i lock the screen and unlock it again
best regards
the same problem
Same here + Sometimes it becomes crazy and do random clicks all over the screen.
Same here, not sure what to do about it. Both the need of a lock to respond and the random clicking have happened to me, the clicking is usually in the upper right side for me.
Sent from my MB511 using XDA App
Related
Hi,
I'm having trouble with my dual lately.
Seems like my screen alignment has gone crazy, i cant tap the start bar anymore, it thinks im tapping richt beneath it, also when i press anywhere in the right side of the screen, i always tap on the lower right softkey, even when pressing on the 'x' button (this is not on the left side, tough). Only when i hold my finger down for about 5 secs, the touchscreen finally notices and then the alignment is a bit more normal (cube opens because of shifting the pressurezone) but still it is off.
It's kinda weird but it acts like the touchscreen is a 'startbar' smaller than the actual screen, since the alignment in the bottom is ok, but at the top it isn't.
I tried re-aligning about 20 times, but it only helped me for a few taps, and i dont want to align it anytime i have to tap on start or x ;( (i also tried hard-resetting)
Anyone know a solution??
I dont really wanna miss my dual for 2 weeks sending it for repair
Thanks in advance!
had a similar issue with mine before. had no choice but to have it sent in as it was a hardware issue with mine.
Sometimes cannot answer by touch screen, too. Not knowing the reason.
Piece of advice: Auto slide-back! Occasionally, I touch the arrow accidentally and the arrow move a little, I touch again, it moves again, finally, it's unlocked! If it can slide back automatically when I didn't slide to the end right and lift my finger, this will not happen.
How about this advice?!
feel lag on when is unlocking. did any one having a same problem with me??
please delete this post...
The unlock swipe would lag for the following reasons:
1. Your wifi was turned on but is off because of screen being off. You turned on the screen which makes the phone re-enable wifi and connect to a network. This process will lag the swipe animation.
2. You used some kind of app (ie. JuiceDefender) that would disable APN (3G) when your screen is off. Turning the screen on again will make the phone to try to reconnect to 3G and this will also lag the swipe animation.
3. You just turned on your phone and because things are still loading at startup, doing the swipe will lag.
Tip: Try to wait for 5 seconds after turning the screen on and then do the swipe motion. It should go back to normal.
If none of that applies to you, do a factory reset =)
this is my second time to hard reset it but still the same.
I often find that swiping doesn't unlock the phone; the arrow won't go all the way to the edge of the screen (it sometimes just stops halfway). When that happens, I press the power button to lock the screen, then try the process again. 9 times out of 10 it'll work fine the second time.
This happens when the WiFi is off, and I am not using any APN software, nor have I just switched the phone on.
It doesn't really bother me, unless this happens when a call comes in, and I can't answer it! (it often takes me a few swipes to answer a call, and I have to swipe it slowly and carefully)
shanespencer said:
I often find that swiping doesn't unlock the phone; the arrow won't go all the way to the edge of the screen (it sometimes just stops halfway). When that happens, I press the power button to lock the screen, then try the process again. 9 times out of 10 it'll work fine the second time.
This happens when the WiFi is off, and I am not using any APN software, nor have I just switched the phone on.
It doesn't really bother me, unless this happens when a call comes in, and I can't answer it! (it often takes me a few swipes to answer a call, and I have to swipe it slowly and carefully)
Click to expand...
Click to collapse
you might have a problem with your screen where some parts wont respond to your touch
download any drawing programs " i find magic marker " is the best from the market place. its free. and tap dots all over your screen, if there is/ are parts that doesnt response to your tap from the first time, that means u have problem with the screen and its not accepting your touch input. which is why your swipe doesnt go all the way sometimes.
Yes there is lag on the unlock screen. I see it as just bad programming by SE.
-------------------------------------
Sent via the XDA Tapatalk App
My swype keep changing direction, anyone nows how to set it to a particular side?
@mirdones - it changes sides when you start with your finger at the top of the swipe arc and slide your phone across the screen (left to right or right to left)..
@everyone - my swipe unlock occasionally stops about 3 quarters of the way along.. all I do is re-swipe from where it stopped and it's fine - that said, it doesn't happen as much now that I have stopped using task killers and startup auditor.
I find that instead of a slow swipe more of a flick works well for me.
Does anyone know if its possible to disable the se lock and just use the android one?
gavriel18 said:
Does anyone know if its possible to disable the se lock and just use the android one?
Click to expand...
Click to collapse
...would love to know this too
This just started yesterday but the bottom of my screen (the side where the serial port is) seems to be less responsive than normally. When I go to click to respond to a text message I find myself having to press it repeatedly. Sometimes the whole screen becomes un-responsive or if I click up top it will actually make a response at the bottom. Could this be at all due to an app or something I installed? Because normally when I put it on standby (pressing the power button once) and turn it back on it will fix it all but the unresponsive bottom section for texting only. Does this make sense to anyone why this could be happening?
Just having touch problems all together
i keep pressing the screen so many timees... even tried to restart and take the battery out. but still same problems
any help
Thanks
Try recalibrating the touch screen guys, that might help. Also if you have a screen protector on, try removing it, I found my first one got more unresponsive over time.
I dont like screen protectors for that very reason and dont use them. But where is the screen recalibration? I've looked and looked for it since this started happening. It's half way working now and really just varies. So if there is a way to calibrate I really feel like that would fix it. Thanks!!
Sent from my Dell Streak using XDA App
yeah mine did that and calibration fixed it.
power it off, hold down both volume buttons and power it on, holding down all three until the menu appears.
Choose option 3 and away you go!
hth....
Haha, this completely fixed it!!! I'm so excited right now becaus I was terrified I did something to it. It works perfectly again. Thank you guys so much!!!
Sent from my Dell Streak using XDA App
It's nice to be able to give some advice that works for a change
Anyone having an unresponsive (to touch) screen when the a500 wakes up?
I thought it was just me or the rom i had or some app doing it but a coworker just got his a500, hasnt installed anything really and is not rooted.
I can sometimes push the sleep/power button a few times and it will come to life but not always.
I think twice i have had to use the hard reset button.
Almost seems as if the screen is not responding to touch when you wake it up and it has to rotate the screen to the orientation you are holding it, but that is 100% speculation and i only say that because the l9ckscreen is unresponsive
Sent from my unknown using Tapatalk
v_lestat said:
Anyone having an unresponsive (to touch) screen when the a500 wakes up?
I thought it was just me or the rom i had or some app doing it but a coworker just got his a500, hasnt installed anything really and is not rooted.
I can sometimes push the sleep/power button a few times and it will come to life but not always.
I think twice i have had to use the hard reset button.
Almost seems as if the screen is not responding to touch when you wake it up and it has to rotate the screen to the orientation you are holding it, but that is 100% speculation and i only say that because the l9ckscreen is unresponsive
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
Once in a while. Usually only when the device has been asleep for a long time. Not sure how to prevent this issue - i usually find hitting the power button a few times clears it up, but I have been forced to reboot from the issue once in a while.