SBF FLASH 1.08 (mbm)
VRZ_A955_2.3.20_1FF_01.SBF: No such file or directory
!! failed
this is happening every time i try. I have looked everywhere to find a fix i dont know what im doing wrong. I have been trying this for 2 days now and figured i would ask the experts. Also sorry i would have copied the whole process but i cant drop links for another 8 posts.
Probably entering the file name incorrectly, or your file isn't in the same directory as your sbf_flash, or you are entering the wrong command.
i have double checked all this. ill keep on trying
Related
Hello all,
first to all who will say I must read the forum for problem solving - I did but from all the info out there it was simply too much. So I decided to start a thread in the hope that somebody will be able to help me.
So I have a corrupted nv_data.bin in my /efs folder but I still have backup of this file. But only this file.... I know - totaly dumb... I installed new JPX and after trying to change the product code from KOR to MOT (Slovenia) I accidentaly deleted nv_data.bin. I of course tried to replace it thru Astro Mate (I did had rooted phone - Darky's 6.0 was working fine ) but everytime I tried copiing this file tt didn't copy actualy - It said copied but the old file remained there - I know this because the Productcode didn't change. So I deleted the file thinking that this will help and tried to copy again. To my bad luck it didn't. I tried to copy and everytime a new file was created instead. also renaming a bakup file in this folder was not succesfule - it said Fald to rename file nv_data.bak. Since then my SIM card is not recognized and when I check what Baseband version I have it it written Unknown. So I tried even with ADB Shell, use busybox and when I eneter cp /sdcard/nv_data.bin /efs it says Now enough free space??? So I don't know anymore what to do. Does somebody have an idea what I can try to solve this? Please please please? I will donate to the one who helps me saving my SGS.
Thanks,
Borut
Hi !
This is because the file is used by the system.
Safest method:
- Reboot into recovery (make sure you have root in recovery)
- do what do need to do in recovery
- Reboot in normal state
In recovery phone / baseband / RIL are not started.
so you mean when I boot in recovery i can copy the file using adb shell? Or how do you mean I can do what I must do?
I have done it before while the phone is on, but you have to enter flight mode, set the correct owner and rights and reboot afterwards.
Well, regarding ownership and stuff like that - I'm a tootal noob
Help please NV_Data.BIN
I know this isn't the place to post this but I have been trying since yesterday afternoon can't figure out where I should post it to I keep getting an error that due to spam I can't post to certain areas without having 10 posts.
Please help -
I am not sure what to do now. I changed the rom on my phone to put 2.2 on it a while back. I never saved any of the files because I was not aware to. Now I am trying to go back to stock already used the one click Odin program and I have the original stock firmware on it. But when I try to update via kies mini it will not show up. I have searched And found multiple postings related to the fact that the product id and imei could be incorrect and you would need the original nv_data.bin file. I have searched through windows explorer on the phone but can't seem to locate one. Is there any way that I can get a copy of the original folder for /efs/nv_data.bin and any other files that are needed?
I have the Samsung Captivate on AT&T currently running 2.1
BaseBand: I897UCJF6
Kernel Version: 2.6.29 [email protected] #2
Build number: ECLAIR
You need to check your IMEI matches your original .
You have stock rom stock as in not the network supplied firmware that came with the phone ..
Windows explore is no good you need something like root explorer .#
I can get a copy of the original folder for /efs/nv_data.bin and any other files that are needed? Not unless you saved them they are phone specific .
Worth doing a factory reset before you make any step as that may solve your problem .
jje
how do I check the original imei? I didn't backup the files as I was not advised to in the information I found online at the time (couple months back). I have done a factory reset via the phone (privacy settings) a couple times now and still when I plug into kies it tells me Unregistered device.
This is very simple to fix if you have nv_data.bak in the EFS folder.
If that file is present then you can safely delete nv_data.bin and reboot the phone.
A new nv_data.bin will be generated.
how do i know if I have nv_data.bak? where on the phone would I find it and how?
Gotmtdew said:
how do i know if I have nv_data.bak? where on the phone would I find it and how?
Click to expand...
Click to collapse
It should be in the efs folder (unless you've done something to delete it). As said by JJEgan, you will need root explorer. Navigate to it in the efs folder and copy it to the external sd card and then keep it safe somewhere.
how do I check the original imei?
Its on the box and or with the receipt .
jje
seems no matter how many times i try and re name this stupid file, it wont do what its ment too
we are ment to rename radio's PC10IMG.zip
but each time i do that, is saves the file as PC10IMG.zip.img
it wont remove the .img file... anyone have any suggestions on this... ive done this before, but for some reason my comp is doing this, and it wont let me change my radio
You have Windows set to show extensions for all file types?
kneedraggin101 said:
seems no matter how many times i try and re name this stupid file, it wont do what its ment too
we are ment to rename radio's PC10IMG.zip
but each time i do that, is saves the file as PC10IMG.zip.img
it wont remove the .img file... anyone have any suggestions on this... ive done this before, but for some reason my comp is doing this, and it wont let me change my radio
Click to expand...
Click to collapse
Its not working because you have a radio.img file, you can only flash .img files with fastboot,
You need to download the zip files I made in my radio thread Here and rename the files in my thread. Read the instructions in the OP.
Hi I'm trying to unlock my SGS GT-i9001 by looking for the unlock code in the nv_data.bin file.
I have read in several tutorials that the location of this file is either /efs or /dev/block folders, but the file is not there.
Can anyone help me finding this file in order to unlock (simfree) my cell.
firmware 2.3.6
GINGERCREAD.XXKQ1
Thanks
mol8 said:
Hi I'm trying to unlock my SGS GT-i9001 by looking for the unlock code in the nv_data.bin file.
I have read in several tutorials that the location of this file is either /efs or /dev/block folders, but the file is not there.
Can anyone help me finding this file in order to unlock (simfree) my cell.
firmware 2.3.6
GINGERCREAD.XXKQ1
Thanks
Click to expand...
Click to collapse
I know this may not be the most helpful post but I had the same problem, years ago when I first got my i9000, I had no nv.data.bin file. there is away around it but I can't remember what I did, try googling for creating an nv_data.bin file. just keep persevering.
I seem to remember using superoneclick at somepoint, maybe you need root first
also see this thread, it may help
http://forum.xda-developers.com/showthread.php?t=1359478&highlight=unlock
http://shortfuse.org/ - superoneclick
To avoid filling the forum with question i'm just going to create this thread and ask all my questions here.
I finally rooted my nexus 7 on my mac and now am hoping to install a USB ROM, i couldnt post a link but it seems to be most popular for in car installs.
I downloaded the file and compressed it to a .zip file then tossed it onto the android. Next i booted into clockwork recovery the selected install zip from sd card>Choose zip from sd card> 0/>cm-10.zip>yes - install cm-10.zip
After this the tablet says
Finding update package...
opening update package...
installing update...
installation aborted...
Can anyone help me and/or tell me what i'm doing wrong? all help is appreciated. Thankyou
Mperkins92 said:
To avoid filling the forum with question i'm just going to create this thread and ask all my questions here.
Click to expand...
Click to collapse
A more acceptable procedure is to find - via SEARCHING - closely related threads first, and post your questions in those threads. That demonstrates to people that you've actually tried to help yourself by searching. If you actually have something unique to say, in that circumstance you start a new thread.
"Help me install a ROM" is not a new idea here on XDA, whether you have a problem with it or not.
Mperkins92 said:
I downloaded the file and compressed it to a .zip file
Click to expand...
Click to collapse
It's already a .zip file to begin with when you download it. Is your Mac uncompressing it automatically when you download it?
If so, use something other means (not Safari?) to download it. FTP. Wget. Firefox for Mac.
Then, if the ROM developer publishes rom file MD5 signatures, validate that you can compute the same checksum on the file downloaded to your computer.
If you then subsequently copy it to something else (such as the tablet), check the file length and/or the MD5 signature of the copied file as well.
Was there not some additional message on the screen besides "installation aborted"? Details are important.
The most probable guess at the moment (from your narrative) is that you borked the download and/or did something else that made the custom recovery unhappy.
BTW, when you install a new ROM for the first time, you generally:
(a) make a full Nandroid backup first (using the custom recovery)
(b) perform a "factory reset" in the custom recovery,
(c) flash of the ROM file.
Attempting the last step without the first two is just begging for trouble.
good luck
hi guys!
First of all : I'm new to the custom rom scene development. I do know how to flash and so..
So i've installed cygwin and the android kitchen. I took the stock rom provided to me by the manufacturer, i was able to set up the working folder. Then I did : "Build ROM from working folder", without making any changes to apk's or something like that.
When i got the update.zip file i tried flashing it with a recovery and using the update.zip in /sdcard method. The first method just stopped after verifying, the second method said it was an invalid package.
I believe there is something wrong with the signing of the rom. Could you guys help me out?
Thx!
Check type of script used in update.zip
tcornelis said:
hi guys!
First of all : I'm new to the custom rom scene development. I do know how to flash and so..
So i've installed cygwin and the android kitchen. I took the stock rom provided to me by the manufacturer, i was able to set up the working folder. Then I did : "Build ROM from working folder", without making any changes to apk's or something like that.
When i got the update.zip file i tried flashing it with a recovery and using the update.zip in /sdcard method. The first method just stopped after verifying, the second method said it was an invalid package.
I believe there is something wrong with the signing of the rom. Could you guys help me out?
Thx!
Click to expand...
Click to collapse
Did u signed the update.zip while exporting rom using cygwin menu. ?
If you didnt sign it will notify that is invalid
But there might be some other kind of issue like
1. Cygwin provides updater_script and update_script in update.zip package it contain all information reguarding flashing
check that your device require which type of script .
let me know your responce.
Press thanks button. if this helped