Upgrade BIN file for any TG01/ROM, in SD Downloader + Pin(1+3)
This is a easy:
1) Copy ROM TG01WP_00.bin to SD Card/prg folder
2) Without SIM Card
3) Try Pin Method 1+3
4) ROM upgade now.... maybe 1 or 2 minuts
5) this is a fasters method
Cheers
Thank you.
I was wondering if it could be flashed a .bin
You brought me the answer.
Nokser said:
Upgrade BIN file for any TG01/ROM, in SD Downloader + Pin(1+3)
This is a easy:
1) Copy ROM TG01WP_00.bin to SD Card/prg folder
2) Without SIM Card
3) Try Pin Method 1+3
4) ROM upgade now.... maybe 1 or 2 minuts
5) this is a fasters method
Cheers
Click to expand...
Click to collapse
hi nokser great tip! Is this correct?
make a .bin file with tg01tool and this command: (TG01WP_00.tsw orginal ROM)
tgtool -dec TG01WP_00.tsw TG01WP_00..bin
mirolg said:
hi nokser great tip! Is this correct?
make a .bin file with tg01tool and this command: (TG01WP_00.tsw orginal ROM)
tgtool -dec TG01WP_00.tsw TG01WP_00..bin
Click to expand...
Click to collapse
this is a very fasters method...
Nokser said:
this is a very fasters method...
Click to expand...
Click to collapse
yes, man! i have test it- flash such lightspeed!
but, we have to decode as bin- file, yes? (with tgtool)
mirolg said:
yes, man! i have test it- flash such lightspeed!
but, we have to decode as bin- file, yes? (with tgtool)
Click to expand...
Click to collapse
Yes, i find this method in old bootloader
Now i have BLDR load if press camera only
--------------
Nokser said:
Yes, i find this method in old bootloader
Now i have BLDR load if press camera only
Click to expand...
Click to collapse
very interest in ur BLDR
is it a new bootloader?support wp7 or have any new utilites？
ffboy2009 said:
very interest in ur BLDR
is it a new bootloader?support wp7 or have any new utilites?
Click to expand...
Click to collapse
Yes, it's new bl from toshiba, but not support WP7 now...
Nokser said:
Yes, it's new bl from toshiba, but not support WP7 now...
Click to expand...
Click to collapse
sounds great!
can u share to us?wanna test this
ffboy2009 said:
sounds great!
can u share to us?wanna test this
Click to expand...
Click to collapse
You have this in my new ROM....
Nokser said:
You have this in my new ROM....
Click to expand...
Click to collapse
yep.i noticed! thx!
To the non chef's out there, what advantage does this have over the standard TG01_SDDL+.EXE method?
dr_strangetrick said:
To the non chef's out there, what advantage does this have over the standard TG01_SDDL+.EXE method?
Click to expand...
Click to collapse
Is there a way to convert .bin file to .tsw?
Because I've never used pin method and I wouldn't try just right now...
Thx!
dr_strangetrick said:
To the non chef's out there, what advantage does this have over the standard TG01_SDDL+.EXE method?
Click to expand...
Click to collapse
Yes, id like to know the difference
olyloh6696 said:
Yes, id like to know the difference
Click to expand...
Click to collapse
me as well please someone?
also OLYLOH6696 - do you know what happen to ENERGY ROM thread? it gone? deleted? can't find this! no ENERGY rom for TG01 phones?
olyloh6696 said:
Yes, id like to know the difference
Click to expand...
Click to collapse
The difference seems to be obvious. Because .bin file is not encrypted, TG01 bootloader does not waste any time for decryption process. It allows us to suspect that flashing procedure will be faster and collegue Nokser mentioned about it.
It takes 1-2 minutes as He said.
And as I always say, why people use 3-pin method having more covenient and safe way by sdll+.exe ? Only not bootable roms should be flashed 3-pin method.
People like to play with electrostatic shock.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
The difference seems to be obvious. Because .bin file is not encrypted, TG01 bootloader does not waste any time for decryption process. It allows us to suspect that flashing procedure will be faster and collegue Nokser mentioned about it.
It takes 1-2 minutes as He said.
And as I always say, why people use 3-pin method having more covenient and safe way by sdll+.exe ? Only not bootable roms should be flashed 3-pin method.
People like to play with electrostatic shock.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
sure, i use short pin method only if my "test" Rom not boot! standard and save method is sd card and ssdl+.
Thanks Fxdjacentyfxd, nice simple explanation
fxdjacentyfxd said:
The difference seems to be obvious. Because .bin file is not encrypted, TG01 bootloader does not waste any time for decryption process. It allows us to suspect that flashing procedure will be faster and collegue Nokser mentioned about it.
It takes 1-2 minutes as He said.
And as I always say, why people use 3-pin method having more covenient and safe way by sdll+.exe ? Only not bootable roms should be flashed 3-pin method.
People like to play with electrostatic shock.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Thanks nice explanation
Related
Hello Wallaby-Users.....
New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....
More Infos coming soon here in ths thread.
See some screenshots:
WOOOOHOOOOO!!!!!!!! WEEEE!!!!! YOU ARE OUR MAN!!!!
LumpiStefan said:
Hello Wallaby-Users.....
New Upgrade-Option is waiting for you.
Hope to release soon a WM2003SE-Edition for the Wallaby.....
More Infos coming soon here in ths thread.
See some screenshots:
Click to expand...
Click to collapse
Btw if you need a PW10A1 tester, you can mail me/find me on msn: [email protected]
Ok. Now it´s done .....
Rom is available.
Until now there are a few linitations with this ROM:
1.) Bootimage are not adjustable. Needs more investigations
2.) Flashing is only via EXE-File possible, because this ROMs are little bit bigger than the normal an xdatools checks the filesize.....
3.) Part of ROm that was reserved for backup is used in this ROM, so those data will be destroyed while flashing.....
ROM is available without any additional Programs (Download the Attachement) and also already included in the kitchen (http://lumpistefan.dyndns.org/).
I cannot gurantee, that all is working fine. So flashing is on your own risc....
Also it would be great if some nice guys donate for the xda-developers or for me. Link ares available here and on my kitchen....
If you have any problems, please use this thread, PM to me or Email....
Have fun with the new ROM...
Stefan
LumpiStefan Gr8 Work
In the rom kitchen it's available with additional file size after adding some softs it's 16.1 , is it safe to flash it?
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Does it still have the SD-erase bug?
KTamas said:
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Click to expand...
Click to collapse
Is it fast, working normaly, buggy?! tell me I'm excited heheh
ramram said:
KTamas said:
You are our man once again! cooked a rom in the kitchen, flashed it, works flawlessly....THANK YOU!
Click to expand...
Click to collapse
Is it fast, working normaly, buggy?! tell me I'm excited heheh
Click to expand...
Click to collapse
It is faster than WM2003
when will it be revealed in german?
It's working good and it's faster- movies works faster.
I hope that SD card erase bug is fixed.
I tested it, so far working and fast. I'm just waiting the Sd-Erasure bugg... I hope it wont happen....
theholysaint said:
when will it be revealed in german?
Click to expand...
Click to collapse
I think never. :-(
Stefan
KTamas said:
Does it still have the SD-erase bug?
Click to expand...
Click to collapse
Don´t know. Myself only had this problem one time in using the xda with WM2003 for 1 1/2 Year. WM2003SE i have running now for 2 days. So i can´t tell it really....
Stefan
Hi Stefan,
i am geting GetDeviseData error, any idea? btw thanks for great work
LumpiStefan said:
KTamas said:
Does it still have the SD-erase bug?
Click to expand...
Click to collapse
Don´t know. Myself only had this problem one time in using the xda with WM2003 for 1 1/2 Year. WM2003SE i have running now for 2 days. So i can´t tell it really....
Stefan
Click to expand...
Click to collapse
I think it does not (i repeat, i THINK). The sd-erase bug was a bug in Windows CE 4.2 (WM2003 based on that), and there were a patch that correct that bug (if you have the WCE4.2 source of course ), so WM2003SE should be patched.
kamiar said:
i am geting GetDeviseData error, any idea? btw thanks for great work
Click to expand...
Click to collapse
There are 2 possibilities:
1.) Wrong device. This only works with Wallaby devices (XDA I / MDA I / ... )
2.) You have rom that prohibits flashing via exe (e.g. 4.01.16) Than you have to downgrade first via SD-card (e.g. Special Edition ROM) and then upgrade to WM2003SE
HTH
Stefan
As I remember I flashed my device with this ROM long time ago, Lumpistefan you finnaly sort it out to let it work GOOD WORK!!!! :wink:
were can i gt the patch
im trying to upgrade i dont have the patch yet sd eraser.
Hi,
I had rom 4.01 and had to downgrade to 3.17 with SD to be able to upgrade to 2003SE, i did that but now it hangs at boot screen and the problem is that i dont have a card reader and even can not sync, how can i make another image on SD or any other solution?pls
Thanks
Hi guys.
I just upgraded my O2 HD2 to an official ROM by using this method WITHOUT goldcard:
http://www.handy-faq.de/forum/htc_h...d2_sspl_verfuegbar_flashen_ohne_goldcard.html
Its written in German, here is what you need to do:
Unrar your favorite ROM and rename (if it isnt allready) the .nbh file to "RUU_signed.nbh"
Unrar the attachment SSPL_RUU.zip and copy your RUU_signed.nbh in the same folder.
Now just flash as usual Make sure you watch your HD2 screen and allow any file to run.
It worked for me.
UPDATE: Didnt saw that this file is from bepe. Look here for the thread http://forum.xda-developers.com/showthread.php?t=606713
Thanks and sorry bepe.
bloodyking said:
Unrar your favorite ROM and rename (if it isnt allready) the .nbh file to "RUU_signed.nbh"
Unrar the attachment SSPL_RUU.zip and copy your RUU_signed.nbh in the same folder.
Now just flash as usual Make sure you watch your HD2 screen and allow any file to run.
It worked for me. Thanks for that to the starbase 64 guy.
Click to expand...
Click to collapse
You can also just follow the guide for flashing with SSPL here, at this very forum. Will flash both signed and unsigned ROMs.
I wonder if that starbase 64 guy created his own SSPL, or is using bepe's without giving proper credit. If you're registered at that forum, perhaps you can compare the two?
Wow
The two files are the same.. So that starbase guy used it without thanking I think. You can compare this by yourself, just download the attachment from below! Heck.. I am sorry I gave the wrong person credit.
Sorry that I didnt saw the other thread! I searched, but Ive found nothing. I think he should mention "without goldcard" or something in his thread title..
bloodyking said:
Wow
The two files are the same.. So that starbase guy used it without thanking I think. You can compare this by yourself, just download the attachment from below! Heck.. I am sorry I gave the wrong person credit.
Sorry that I didnt saw the other thread! I searched, but Ive found nothing. I think he should mention "without goldcard" or something in his thread title..
Click to expand...
Click to collapse
No worries!
Actually, I think bepe's thread doesn't mention you can also flash official ROMs with the SSPL explicitly either. That might be worth mentioning, especially since I believe the free goldcard offer ended on the 27th.
As far as I understand the flashing procedure with sspl, you can flash the OS only but not HSPL or Radio even if you are using a "official" HTC Rom - sspl is just ignoring radio and hspl part.
Depending what you would like to do this is ok or it is a limitation.
Best regards,
dingolino
not working for me
Uhm, what do I miss now? HSPL, is this the posibility to flash homecooked stuff? And whats up with the radio? Doesnt it work normal with this method of flashing? thanks
At the moment all functions seem to be normal (cant test the radio yet, no headset) The method worked really well!
>Edit Seems like the radio is complete missing ^^ I dindnt realised this at first... Is there any .cab to get it back?..
bloodyking said:
Hi guys.
I just upgraded my O2 HD2 to an official ROM by using this method WITHOUT goldcard:
http://www.handy-faq.de/forum/htc_h...d2_sspl_verfuegbar_flashen_ohne_goldcard.html
Its written in German, here is what you need to do:
Unrar your favorite ROM and rename (if it isnt allready) the .nbh file to "RUU_signed.nbh"
Unrar the attachment SSPL_RUU.zip and copy your RUU_signed.nbh in the same folder.
Now just flash as usual Make sure you watch your HD2 screen and allow any file to run.
It worked for me. Thanks for that to the starbase 64 guy.
Click to expand...
Click to collapse
Say THANKS too BEPE first and read before you post
How about you read all my posts here and understand why Ive posted that by accident?
<.< Allready cleared that BePe did the job. Thanks BePe
bloodyking said:
How about you read all my posts here and understand why Ive posted that by accident?
<.< Allready cleared that BePe did the job. Thanks BePe
Click to expand...
Click to collapse
begin to read the forum rules
My htc HD2's SPL version is 3.03.000... I can't install HardSPL with it at all, anyone can teach me how to do it? If I'm going to flash a stock ROM with lower SPL version, give me instructions of the flashing the guide too?
CookiesMilk said:
My htc HD2's SPL version is 3.03.000... I can't install HardSPL with it at all, anyone can teach me how to do it? If I'm going to flash a stock ROM with lower SPL version, give me instructions of the flashing the guide too?
Click to expand...
Click to collapse
Seriously?...There are several tutorials (both text & videos) right here on xda & out there regarding flashing HARDSPL properly...Please try using the search function provided on xda or @ d very least use this link..
CookiesMilk said:
My htc HD2's SPL version is 3.03.000... I can't install HardSPL with it at all, anyone can teach me how to do it? If I'm going to flash a stock ROM with lower SPL version, give me instructions of the flashing the guide too?
Click to expand...
Click to collapse
Are you taking the piss?
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
U can get a official ROM from the HTC website, make sure u DONT get the newest, but the 1.66 ROM version.
Extract the *.exe to your desktop using WINRAR and u will have a .nbh file in there.
Have fun!
voncrane said:
Seriously?...There are several tutorials (both text & videos) right here on xda & out there regarding flashing HARDSPL properly...Please try using the search function provided on xda or @ d very least use this link..
Click to expand...
Click to collapse
So what~? Don't post in my thread if you didn't intend to help~ Don't give me crap.
TheATHEiST said:
Are you taking the piss?
Click to expand...
Click to collapse
Yea, so what?
Azerox said:
U can get a official ROM from the HTC website, make sure u DONT get the newest, but the 1.66 ROM version.
Extract the *.exe to your desktop using WINRAR and u will have a .nbh file in there.
Have fun!
Click to expand...
Click to collapse
Your a sensible one. Good for you.
CookiesMilk said:
So what~? Don't post in my thread if you didn't intend to help~ Don't give me crap.
Click to expand...
Click to collapse
I'm sorry, u call a cry for help a thread?...You not only want 2 be carried to the dinner table...u also want 2 be spoon-fed...wats next? have ur a** wiped after taking a massive dump...i gave u d best advice there is, u r a fool 2 ignore it..
READ man, READ.
voncrane said:
I'm sorry, u call a cry for help a thread?...You not only want 2 be carried to the dinner table...u also want 2 be spoon-fed...wats next? have ur a** wiped after taking a massive dump...i gave u d best advice there is, u r a fool 2 ignore it..
Click to expand...
Click to collapse
So what? I have the right to do whatever I like. You're just being meddlesome. A busybody nanny. Stop giving me crap, it's considered as spamming.
Be wise and take my advice of don't post in my thread if you don't have the intention of helping. Imprudent dimwit.
CookiesMilk said:
So what? I have the right to do whatever I like. You're just being meddlesome. A busybody nanny. Stop giving me crap, it's considered as spamming.
Be wise and take my advice of don't post in my thread if you don't have the intention of helping. Imprudent dimwit.
Click to expand...
Click to collapse
just tiny bit of advice for you (take it or leave it), if you had trouble finding how to install hspl on your own, i suspect you are going to have a few more difficulties getting android onto your HD2 (if thats your goal)
your right in saying dont post if you dont want to help, but you need to show at least an ounce of initiative if you want to avoid this type of response.
Everything you need can be found in the links below:
http://forum.xda-developers.com/showthread.php?t=893948
http://forum.xda-developers.com/showthread.php?t=609477
all the best
Kam
search hspl4
coldest~~~ said:
search hspl4
Click to expand...
Click to collapse
u can have it from here
Any body know a noobish way to convert cwr zip's to a SD (boot from haret/WM) ?
Thank's in advance !
There is no noobish way to do that...
You know an other way you can share maybe?
I am 100% sure it cannot be done easily, never heard of a method to convert it anyway. I am not a chef,but I guess you have to cook it separately, just ask the chef of a ROM you'd liked to have in a NAND form, and maybe (but probably not) he will cook a nand version.
Its just that i wanna change the clockwork file's to a SD build.
If i extract the cwr zip file ,i have no system.ext file ,its a system folder.
Haret is missing to ..
stillbeer said:
Any body know a noobish way to convert cwr zip's to a SD (boot from haret/WM)?
Click to expand...
Click to collapse
I am interesting in having TyphooN CM7 3.35 NAND ROM converted to an SD ROM. So...
+1
Actually guys.. you should have used the search box!
Here's a way to do that
white-energy said:
Actually guys.. you should have used the search box!
Here's a way to do that
Click to expand...
Click to collapse
Excellent, but I need a one-click Windows solution. That is way beyond me.
Use VirtualBox my friend.
white-energy said:
Use VirtualBox my friend.
Click to expand...
Click to collapse
Right now, it is all a blur. I am getting too old for this, methinks. But... I have not yet thrown in the towel.
MarkAtHome said:
Excellent, but I need a one-click Windows solution. That is way beyond me.
Click to expand...
Click to collapse
thats why a few posts up it was saiud no easy method of doing it
unfortunately if it was as simple as 1 click then everyone would be making their own roms
The fact that it was said that there is no easy method is sufficient to get our developers going -- they will create such a solution, since it would be considered a challenge.
This is XDA after all.
Hello,
So a friend of mine just shot my hd2 out of my hands with a soccer ball.
The screen is totally cracked but i can use the touchscreen etc.
Now i remember that someone told me it was better if i removed Android Flash (Magldr way or something) with the insurrance.
Can someone explain me how to remove it please
I really need some help !!!!
guppie11 said:
Hello,
So a friend of mine just shot my hd2 out of my hands with a soccer ball.
The screen is totally cracked but i can use the touchscreen etc.
Now i remember that someone told me it was better if i removed Android Flash (Magldr way or something) with the insurrance.
Can someone explain me how to remove it please
I really need some help !!!!
Click to expand...
Click to collapse
Hi,
Sorry to hear about your phone.
Please read this thread .It will help you re-install WM ...
http://forum.xda-developers.com/showthread.php?t=893948
5. UNINSTALLING MAGLDR AND NAND ANDROID (FLASHING WINMO BACK TO NAND)
malybru said:
Hi,
Sorry to hear about your phone.
Please read this thread .It will help you re-install WM ...
http://forum.xda-developers.com/showthread.php?t=893948
Click to expand...
Click to collapse
Thanks for the reply but this is NAND?
I use the SD way
Does this matter?
guppie11 said:
Thanks for the reply but this is NAND?
I use the SD way
Does this matter?
Click to expand...
Click to collapse
So,you already have WM on your phone?
In which case there is no problem...
Just delete Android from your sd card or simply do not send it back with the sd card.
malybru said:
So,you already have WM on your phone?
In which case there is no problem...
Just delete Android from your sd card or simply do not send it back with the sd card.
Click to expand...
Click to collapse
Well i got the SPL thing installed . HardSPL or something?
Can iremove this?
guppie11 said:
Well i got the SPL thing installed . HardSPL or something?
Can iremove this?
Click to expand...
Click to collapse
So which ROM is running on your phone?
malybru said:
So which ROM is running on your phone?
Click to expand...
Click to collapse
You mean the android rom?
guppie11 said:
You mean the android rom?
Click to expand...
Click to collapse
When you switch your phone on,do you see WM or Android?
malybru said:
When you switch your phone on,do you see WM or Android?
Click to expand...
Click to collapse
When i turn on my phone i first get to WM 6.5 .
Then i have to start clrad and the other to go to android
guppie11 said:
When i turn on my phone i first get to WM 6.5 .
Then i have to start clrad and the other to go to android
Click to expand...
Click to collapse
In which case you do not have a problem.
Download a STOCK ROM from here:
http://forum.xda-developers.com/showthread.php?t=623283
Choose one that is from your area.
Then take out the sd card and send the phone back.
malybru said:
In which case you do not have a problem.
Download a STOCK ROM from here:
http://forum.xda-developers.com/showthread.php?t=623283
Choose one that is from your area.
Then take out the sd card and send the phone back.
Click to expand...
Click to collapse
Cant i just download 1 from HTC its own site?
I downloaded just 1 there RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07u_2.05.51.05_2_Ship.exe
If this is oke i just have to start that and plug in my phone?
guppie11 said:
Cant i just download 1 from HTC its own site?
I downloaded just 1 there RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07u_2.05.51.05_2_Ship.exe
If this is oke i just have to start that and plug in my phone?
Click to expand...
Click to collapse
Yes,that will work as well.
malybru said:
Yes,that will work as well.
Click to expand...
Click to collapse
So then everything will be removed and my phone wont be like bricked or something?
guppie11 said:
So then everything will be removed and my phone wont be like bricked or something?
Click to expand...
Click to collapse
You are ok to flash the ROM you downloaded.
This will clear everything off and restore it to factory settings.
Don't forget to take out sd card when you send your phone back.
malybru said:
You are ok to flash the ROM you downloaded.
This will clear everything off and restore it to factory settings.
Don't forget to take out sd card when you send your phone back.
Click to expand...
Click to collapse
Oke thanks for everything
I will try to do this and fix it
Ps.
Maybe got a site where i can download a driver for hd2? Cant find any my laptop cant find my phone ":S
guppie11 said:
Oke thanks for everything
I will try to do this and fix it
Click to expand...
Click to collapse
Thanks button is good
malybru said:
Thanks button is good
Click to expand...
Click to collapse
Allready pressed it
Ps.
Maybe got a site where i can download a driver for hd2? Cant find any my laptop cant find my phone ":S
guppie11 said:
Allready pressed it
Ps.
Maybe got a site where i can download a driver for hd2? Cant find any my laptop cant find my phone ":S
Click to expand...
Click to collapse
Are you on XP or windows 7?
malybru said:
Are you on XP or windows 7?
Click to expand...
Click to collapse
W7 Home x86
You need to revert back to orginal... HSPL is a hack and your warranty is void.
Do this
Extract with winrar or 7z the RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.0 7u_2.05.51.05_2_Ship.exe
find the larger *.nbh file and rename it to leoimg.nbh
copy it to your SDcard and reboot to bootloader (the one with 4 colors)
folow then instructions from there
That way you will have your original software with SPL restored and ready to send it for repear
No need for PC drivers etc.