Database Users

Run a Java applet on HD2?

Is there anyway to get the Oanda FXTrade platform to run on the HD2? The only solution I've been able to come up with is remote desktop, but that is far from optimal. This link: http // www smartphonemag com/cms/blog/9/how-do-i-run-well-known-oandacom-stocks-applet-my-pocket-pc-incl-tons-brand-new-never-publish (had to edit out the "."'s and replace them with spaces to get around the spam filter) talks about running it on WM, but the link to the .jar file is bad (and I had tried it before on my Tilt when the link did work, but never could figure out how to get it to work).
Here is link to the Java Web Start that I normally run from my PC: https //fx1 oanda com/java/beta jnlp (again "."'s replaced with spaces).
Has anyone had any luck at finding a way to run Java programs on the HD2/other WM devices? The 800x480 screen and 1GHz CPU would be perfect for mobile trading. I would be so grateful if anybody has any suggestions.

yup man..been waitin the same... pls help..

Same here, if anyone finds a solution I will be really interested to know!!
For now, I'm using Metatrader for the same purpose...

Yes, this is needed so much. I have different websites that need java applets for my hd2. Is there a solutuion today?

I think the Oanda FXTrade platform has changed since he wrote this article.
even this page: http://www.winmobiletech.com/sekalaiset/OandaComAppletInvoke.html
that he wrote to access the oanda platform is failling due to http 404 (file not found) edit: not the page itself but the page trys to request the platform.class file for the beta.jar and it returns a http connection failed to the java console.
I have looked into this quite fully.
It seems the stuff he was referring to was all beta code and has now been removed.
I have found the current jnlp file:
http://fxtrade.oanda.com/fxgui/desktop/fxtrade.jnlp
The new codebase seems like it should be:
https://fxtrade.oanda.com/fxgui/www/fxtrade
and there are now three jar files instead of one:
https://fxtrade.oanda.com/fxgui/www/fxtrade/trading-app.1.10.17.jar
https://fxtrade.oanda.com/fxgui/www/fxtrade/trading-res.1.10.17.jar
https://fxtrade.oanda.com/fxgui/www/fxtrade/protobuf-java-2.1.0.jar
I have tried to modify what he has done in the tutorial you posted to add the new information.
Unfortunately this has been unsuccessful and I am unsure where to go from here.
maybe someone who knows a bit more about jar/jnlp architecture could take it from here?

download the applet, then go to start > tools > jblend
there should be a list of applets.

Linux Distro dev edition

This distro was created with all the tools needed for android development. After you install this os, you're ready to start developing for Android.
GreenRom Dev Kt is now available. It has Android SDK/NDK, Eclipse, ADB(from any location!), ThemerStudio, all required dependencies for compiling roms, repo init for pulling source code from github, and Gimp for theming/editing graphics.
Q:Why is this important?
A:Because all you need to do is install this OS, plug in your phone, and begin having fun as you dev. There's no need to try and download and install ANYTHING for Android development because it's all been done for you. Do you need to run ADB Logcat? Go ahead. Now there's no need to make sure you're in a certain directory because you can run ADB from anywhere.
Some common questions might be:
Q:Do I have to install GRPdevkit to my HDD?
A:No, you can run it from live mode and store your progress on a pen drive. Alternately, you can install it on a pen/usb drive and run it from that if your bios detects usb drives.
Q:Will I be able to install this alongside another OS?
A:Possibly, although LivLogik and I haven't had any luck with dual booting this nor Ubuntu.
Q:Will this screw up my computer?
A:As with any Linux OS that's experimental, the possibility is there, although LivLogik and I have been testing this OS extensively to ensure all the bugs have been work out before making it available to you. Nevertheless, we are in no way responsible for your actions!
Q:What if I don't want to dev and just want to use this for an every day system?
A:That's quite fine as this OS is built from Linux Mint 11 and has all the stuff you probably use such as Brasero, X-Chat, Transmission, Libre Office, Movie Player, Calculator, Pidgin, G-Thumb, and much more!
Q:What if I can't burn an installation disk?
A:As with the majority of mainstream Linux Distros, we will be offering an installation disk for a small fee + s&h. LivLogik and I have to come up with a design for the cd decal as I have access to a cd printer. We will post the availability when we come up with it.
Q:How do I use the tools that are in this?
A:There is a get started guide on the desktop that you can move to your home folder or delete that explains briefly how to use the tools, however, I didn't include instructions on Eclipse as I've never used it. For Eclipse just go to it's website here: http://eclipsetutorial.sourceforge.net/totalbeginner.html and learn how to use it. Eclipse is used to make programs for Android.
LivLogik will be making a video so that you can see it in action. Enjoy!!
Note: you may need to right click on the desktop and change the wallpaper mode setting from zoom to whatever fits your screen best. -Fixed in update
**EDIT** if you have problems signing in to gtalk on the messanger... go to software manager and in the search box type in gtalk and download that plugin and it should work and if you have problems with anymore accounts like facebook do the same and it should work fine -Fixed in update
CLICK HERE TO VIEW THE VIDEO !!!! (it shows a run through of it and also sorta where everything is and a little how to - livlogik
Video #2 Updates For v1.1
============> grpdevkit.iso - 2.0 GB <============
MIRROR >>>---------------> http://dev-host.org/fj1lh8zu4g60/grpdevkit.iso <-----------------<<<
Code:
[color=green]Change Log: [/color]
(07-22-11 v1.1) :
~Added Chrome Browser
~Added plugin for Gtalk
~Shortcut for SDK/NDK in home folder
~Added shortcut for GRP forum
~Added different wallpaper([color=blue]thanks LivLogik[/color])
(6-?-11 v1) :
~Linux Mint 11(Katya) as Distro base [URL=http://www.linuxmint.com/]Linux Mint11[/URL]
~Remastersys(for building the distro [url]http://remastersys.sourceforge.net/[/url])
~Added GRP custom default wallpaper([color=blue]thanks LivLogik[/color])
~Added Android NDK
~Added Android SDK
~Added all required dependencies for compiling Android OS as follows:
git-core, gnupg, flex bison, gperf, libsdl1.2-dev, libesd0-dev, libwxgtk2.6-dev, squashfs-tools, build-essential zip curl, libncurses5-dev, zlib1g-dev,
sun-java6-jdk, pngcrush, schedtool, lib32z1-dev, lib32ncurses5-dev, lib32readline5-dev
~Added ADB( thanks to Tahl:[URL=http://www.rootzwiki.com/showthread.php?589-Android-SDK-NDK-Eclipse-and-ADB-Auto-Installer-(Ubuntu-Linux-Mint)]Tahl's tread[/URL])
~Added Gimp
~Added ThemerStudio(thanks to CorCor67:[URL=http://corcor67.blogspot.com/p/themer-studio.html]CorCor's blog[/URL])
~Added Repo Init to home directory
[color=red]Testers:[/color]
LivLogik
SlashDW
whoever else has tested or is running the Dev Kit let me know so I can include you in the testers credits. ;-)

epic!? I think so.

Treken said:
This distro was created with all the tools needed for android development. After you install this os, you're ready to start developing for Android. Check it out here: http://greenromproject.com/showthread.php?188-GreenRom-Dev-Kit-is-here!!-64bit(updated-7-23-11)
And, of course, enjoy!
Click to expand...
Click to collapse
Nice! This should save a ton of setup time when I install a new distro
Sent from my ADR6300 using XDA App

AWESOME! Finally, I can run Linux simply. Expect ROM's from me!

EASY Set-up! Now to figure out how to do everything else..... :/

Smokeey said:
EASY Set-up! Now to figure out how to do everything else..... :/
Click to expand...
Click to collapse
If you need some help with anything just let me know.

Wow. downloaded.

vassskk said:
Wow. downloaded.
Click to expand...
Click to collapse
how was the download speed? The server will be getting a make-over tomorrow and should beef up the download speed.

I'm assuming I can make this into a persistent usb and take it anywhere and work on it? Regardless I'm going to give it a shot.

DL started at 700 and dropped 1kB/s every 2 seconds continuously, then dropped out. I thought it was an artifact of the averaging done by Google Chrome; except it was linear, 2 seconds every time.

bogwurm said:
I'm assuming I can make this into a persistent usb and take it anywhere and work on it? Regardless I'm going to give it a shot.
Click to expand...
Click to collapse
Please see #2
Q: Do I have to install GRPdevkit to my HDD?
A: No, you can run it from live mode and store your progress on a pen drive. Alternately, you can install it on a pen/usb drive and run it from that if your bios detects usb drives.

vassskk said:
Please see #2
Q: Do I have to install GRPdevkit to my HDD?
A: No, you can run it from live mode and store your progress on a pen drive. Alternately, you can install it on a pen/usb drive and run it from that if your bios detects usb drives.
Click to expand...
Click to collapse
And boom goes the dynamite
/Dinc

Very nice work. Thanks for this.
Sent from my ADR6300 using XDA App

vassskk said:
DL started at 700 and dropped 1kB/s every 2 seconds continuously, then dropped out. I thought it was an artifact of the averaging done by Google Chrome; except it was linear, 2 seconds every time.
Click to expand...
Click to collapse
The server went down for a little bit. They beefed up the server speeds so it should download faster now. It should be up and running now

Great.. now I have to stop & get more DVDs. My old laptop doesn't boot from usb. Looking forward to trying it out. Thanks!

OP,
You said you were having trouble paralleling it with other os's? Any ideas why? i was very much hoping to throw it alongside joulicloud (ubuntu based) on my ssd.

vassskk said:
OP,
You said you were having trouble paralleling it with other os's? Any ideas why? i was very much hoping to throw it alongside joulicloud (ubuntu based) on my ssd.
Click to expand...
Click to collapse
I wasn't having any luck dual booting Linux Mint or Ubuntu. I have Windows 7 Ultra that I wanted to dual boot but couldn't get it worked out and just gave up since I have to have Linux for most of the development I do.

beard0 said:
And boom goes the dynamite
/Dinc
Click to expand...
Click to collapse
Dino-mite? Faq said run live and store on usb. Assumption was run live from dvd. Second part of answer was run from usb if BIOS allowed it. That's why I assumed I could run a live usb with a dedicated partition on the same usb. If we didn't have questions then we wouldn't have Devs. But thanx for your input Mr Dynamite.

bogwurm said:
Dino-mite? Faq said run live and store on usb. Assumption was run live from dvd. Second part of answer was run from usb if BIOS allowed it. That's why I assumed I could run a live usb with a dedicated partition on the same usb. If we didn't have questions then we wouldn't have Devs. But thanx for your input Mr Dynamite.
Click to expand...
Click to collapse
You should be able to install on a usb pen drive and save your files on a dedicated partition. Just make sure you have enough room on your pen drive. Look here: Link and see the requirements for doing so. I've never actually installed on a pen drive myself but theoretically speaking it's plausible. Let me know if it works out for you.

Will do thanx for the reply. I know how to set up a persistent live distro but some of them are tricky. I like this idea because all I need is the flash drive to do work on any computer.
"Here and now, boys, here and now."-Aldous Huxley

[GPS][Fix] Automate long term orbit data download

I have been looking into slow "cold-start" gps locks & in some peoples cases, complete lack of gps.
In testing, everything I've found so far, seems to be pointing at the lack of Broadcom's proprietary long term orbit data (lto.dat) used by the GPS Daemon on our devices...
These chips are in the a500/a200/a100 devices (101 & 501 devices use an ericsson GPS)
For the sake of not regurgitating a whole heap of info, you can read more about the lto.dat file in plenty of places across the web.
pacificwing recently bought this up in crypted's aGPS patch thread, some discussion on the subject starts around page 30.
The attached, recovery flashable zip will patch your system with a *workaround* to automate the download & update of lto.dat...
It is derived from past work in CyanogenMod for the aries (& other) devices.
It should be compatible with most ROM's, but may need adjusting if your busybox wget applet can't resolve dns. (see notes in the script)
What it does:
Installs the script "get-gps-lto" to /system/bin
Creates a service entry in the init.<boardname>.rc file which runs the script on a semi regular basis. (triggered by network connectivity)
The script is tunable by a number of variables, modify as you see fit.
Or, flash & forget... messages are sent to logcat so you can check up on it easily.
This zip has only been tested on a500, cm9, ics bootloader & cwm recovery.
Mileage may vary on other combinations, the zip patches your boot.img so please make a nandroid backup to be safe. (only need to restore /boot if there's a problem)
Installation problem? please let me know & provide a recovery.log so I can make adjustments to the zip if need be.
Standard disclaimers apply, flash at your own risk.

Oh nice I can build in my rom and the kernel before I release it.

Thanks in advance! I'll flash it in a bit!

civato said:
Oh nice I can build in my rom and the kernel before I release it.
Click to expand...
Click to collapse
Not a problem, you'll be sure to test it before releasing the rom I hope?

Anyone has this working yet? Btw, thank you waydownsouth

waydownsouth said:
Not a problem, you'll be sure to test it before releasing the rom I hope?
Click to expand...
Click to collapse
No

waydownsouth said:
The attached zip will patch your system with a *workaround* to automate the download & update of lto.dat...
It is derived from past work in CyanogenMod for the aries (& other) devices.
It should be compatible with most ROM's, but may need adjusting if your busybox wget applet can't resolve dns. (see notes in the script)
> Download here <
Click to expand...
Click to collapse
So that explains why I could never get my wget script to work....
Sent from my A500 using XDA Premium HD app

would it be possible to port this to another device? nice job by the way

waydownsouth said:
It should be compatible with most ROM's, but may need adjusting if your busybox wget applet can't resolve dns. (see notes in the script)
Click to expand...
Click to collapse
Other than hard coding the IP address (which worked for me by the way) is there a better solution to fixing the busybox DNS problem? I've read that putting a resolve.conf file in /system/etc that contains the Google DNS nameservers should work but I tried it and no luck.
Also, any reason you're not using the 30 day file rather than the 7 day? With the 30 day you wouldn't have to run the script all that often... Is the 30 day less accurate or something?
In any event, thanks.
Sent from my A500 using XDA Premium HD app

I build in my kernel for RF1

civato said:
No
Click to expand...
Click to collapse
azoller1 said:
would it be possible to port this to another device? nice job by the way
Click to expand...
Click to collapse
possible, yes... the installer zip will only work for the picasso, picasso_e & vangogh devices... I could add more devices to the installer if need be?
Only thing I could see being a problem is the where the service entries get written to in the init.<boardname>.rc
The device would need to use a boot.img for it's ramdisk too... Most Samsungs are very different in that regard
BakaNeko59 said:
Other than hard coding the IP address (which worked for me by the way) is there a better solution to fixing the busybox DNS problem? I've read that putting a resolve.conf file in /system/etc that contains the Google DNS nameservers should work but I tried it and no luck.
Also, any reason you're not using the 30 day file rather than the 7 day? With the 30 day you wouldn't have to run the script all that often... Is the 30 day less accurate or something?
Click to expand...
Click to collapse
Most statically compiled generic busyboxes will be like that on android, in the case of CyanogenMod, the busybox has been compiled against the android bionic lib & has a number of modifications for Android compatibility.
I stuck to the 7day data so it will stay a bit fresher... I figured that 60kb isn't much to download every few days.
It's easy enough to change those parameters in the script to point to the 30day
Also, haven't yet had time to test how effective the 30day data is after 20 + days... since I only made this yesterday.
What has been your experience?

waydownsouth said:
possible, yes... the installer zip will only work for the picasso, picasso_e & vangogh devices... I could add more devices to the installer if need be?
Only thing I could see being a problem is the where the service entries get written to in the init.<boardname>.rc
The device would need to use a boot.img for it's ramdisk too... Most Samsungs are very different in that regard
Most statically compiled generic busyboxes will be like that on android, in the case of CyanogenMod, the busybox has been compiled against the android bionic lib & has a number of modifications for Android compatibility.
I stuck to the 7day data so it will stay a bit fresher... I figured that 60kb isn't much to download every few days.
It's easy enough to change those parameters in the script to point to the 30day
Also, haven't yet had time to test how effective the 30day data is after 20 + days... since I only made this yesterday.
What has been your experience?
Click to expand...
Click to collapse
it actually is a samsung, the galaxy player 5.0 so you dont have to do it you could pm me a short tut.
i

This works great! Thanks!

waydownsouth said:
Most statically compiled generic busyboxes will be like that on android, in the case of CyanogenMod, the busybox has been compiled against the android bionic lib & has a number of modifications for Android compatibility.
I stuck to the 7day data so it will stay a bit fresher... I figured that 60kb isn't much to download every few days.
It's easy enough to change those parameters in the script to point to the 30day
Also, haven't yet had time to test how effective the 30day data is after 20 + days... since I only made this yesterday.
What has been your experience?
Click to expand...
Click to collapse
Well,since I've never gotten my sManager script method to work I've just been manually downloading the 30 day one every every now and then. I haven't actually been using my GPS much so I can't say how good it's been.
Is there a busybox installer on the market that you think would be better than the generic one? Or is it possible the CM one would work with Flexreaper?
Sent from my A500 using XDA Premium HD app

BakaNeko59 said:
Well,since I've never gotten my sManager script method to work I've just been manually downloading the 30 day one every every now and then. I haven't actually been using my GPS much so I can't say how good it's been.
Is there a busybox installer on the market that you think would be better than the generic one? Or is it possible the CM one would work with Flexreaper?
Sent from my A500 using XDA Premium HD app
Click to expand...
Click to collapse
I build IT in flexreaper RF1 and the kernel of RF1. Release maybe tomorrow.

BakaNeko59 said:
Is there a busybox installer on the market that you think would be better than the generic one? Or is it possible the CM one would work with Flexreaper?
Click to expand...
Click to collapse
I think all the busybox installers have generic, compiled for arm versions, they will likely have the same problem.
The cm/bionic one is dynamically linked, so depends on some libs in the rom. You could compile a static version against the android source (or ndk), but probably won't work on different versions of android.
Other option, there are real wget binaries compiled for android floating about which aren't neutered like the busybox version... they have no problems resolving dns.
delete the busybox wget symlink & drop in the binary...

waydownsouth said:
I think all the busybox installers have generic, compiled for arm versions, they will likely have the same problem.
The cm/bionic one is dynamically linked, so depends on some libs in the rom. You could compile a static version against the android source (or ndk), but probably won't work on different versions of android.
Other option, there are real wget binaries compiled for android floating about which aren't neutered like the busybox version... they have no problems resolving dns.
delete the busybox wget symlink & drop in the binary...
Click to expand...
Click to collapse
Well, in my 53 years of existence I've grown lazy. I think I'll just use your solution and stop worrying about my own since yours works like a charm.
Sent from my A500 using XDA Premium HD app

I think that gpsfix needs some more fixing comparing with manually downloading lto.dat and copying it at system/gpsconfig file..lr data/gps file..........

mine wouldn't find location at all before on cm9 but with this, after initial long lock, other locks only took ~5 secs. thanks!

drharisis said:
I think that gpsfix needs some more fixing comparing with manually downloading lto.dat and copying it at system/gpsconfig file..lr data/gps file..........
Click to expand...
Click to collapse
This downloads the lto.dat file to the default location /data/gps/
If your gpsconfig.xml file has been modified to point to /system rather than /data, then it won't work.
You could modify the script to point to /system, but, you would also need to include code to mount /system rw before attempting to update.
I think that's what your post was about?

[Nook Simple Touch][FW1.2.1] Kernel with Two Point Touch Mod for Download

Hi all,
Thanks to the huge discount on Nook Simple Touch earlier this month in UK, hopefully the device will regain some popularity and draw more attention from the XDA community. Unfortunately all the new devices come with firmware v1.2.0 while most posts in the forum were for the outdated v1.1.x, including the brilliant multitouch mod from wheilitjohnny. I know there is a way to downgrade to v1.1.x but I still prefer v1.2.1 after I tried v1.1.0. So I decided to port wheilitjohnny's mod to v1.2.1. After one week's hard work as I'm a newbie to the Linux world, I finally built the kernel and saw no more boot loop. All the multitouch test tools from Market correctly reported up to 2 fingers.
Before put the kernel to your device, make sure it's already running 1.2.1 firmware and rooted. You can find the link to the official upgrade file in the forum and you can use Nook Manager to root your device which is also available in the forum.
Then please found the kernel attached as zip file. You need to unzip the file and follow arkusuma's post on how to install it.
http://forum.xda-developers.com/showthread.php?p=24168019#post24168019
All credits go to wheilitjohnny. It's all his work.
One lesson I learned for all the developers who may be interested in more mod development is, to make a bootable kernel you MUST use toolchain from "http://www.codesourcery.com/sgpp/lite/arm/portal/release1293". Select the IA32 GNU/Linux TAR one (MD5: c6930d14801b4fab6705d72df013e58b). Any other toolchains including Google's own or even another version from codesourcery won't work. The generated kernel built with any other toolchains will only cause boot loop.
[UPDATE] Oh forgot to say, you need to add one more line to your /etc/permissions/required_hardware.xml on your device. You should be able to find the first line already in the file, just add the second line.
<feature name="android.hardware.touchscreen" />
<feature name="android.hardware.touchscreen.multitouch" />
More info please check http://forum.xda-developers.com/showthread.php?t=1563645

Does this kernel work with NoRefresh (I assume debug2 version for FW 1.2.x)?

koltshin said:
Does this kernel work with NoRefresh (I assume debug2 version for FW 1.2.x)?
Click to expand...
Click to collapse
Yes. I have NoRefresh_Debug2 and Fast Mode mod running together with this kernel. No problem so far.

Thx. Does this kernel works for both Nook Simple Touch and the Glow light model?
Sent from my GT-N7100 using xda app-developers app

waynesi said:
Hi all,
One lesson I learned for all the developers who may be interested in more mod development is, to make a bootable kernel you MUST use toolchain from "http://www.codesourcery.com/sgpp/lite/arm/portal/release1293". Select the IA32 GNU/Linux TAR one (MD5: c6930d14801b4fab6705d72df013e58b). Any other toolchains including Google's own or even another version from codesourcery won't work. The generated kernel built with any other toolchains will only cause boot loop.
I've had good success with the toolchain on Ubuntu; just install the gcc-arm-linux-gnueabi packages, and add the Makefile and head.S changes that were in the fastmode2 patch; I've not tried building this touch mod, but it has let me build my own kernels with usb host and with TLS support.
Click to expand...
Click to collapse

I can confirm that this kernel works on a NST with Glowlight on FW. 1.2.1 Thanks for the hard work.

Can I use this kernel for 2 fingers zoom in? I tried it with aldiko, but do not work with pdf.

You need to unzip the file and follow arkusuma's post on how to install it.
http://forum.xda-developers.com/showthread.php?p=24168019#post24168019
Click to expand...
Click to collapse
Could somebody please help me installing this without adb over wifi? Because i have internet only over ethernet. I was thinking of CWM.
Thanks

Sagittarius0 said:
... without adb over wifi?
Click to expand...
Click to collapse
Well, how about ADB over USB?

Renate NST said:
Well, how about ADB over USB?
Click to expand...
Click to collapse
Can you please help me exactly how to do it? I have tried it once for some other reason and it didn't work... :crying: And after that I searched for it here and found a post which said that adb works only over wi-fi.
And I am quite new with android so please explain the process well.

waynesi said:
Yes. I have NoRefresh_Debug2 and Fast Mode mod running together with this kernel. No problem so far.
Click to expand...
Click to collapse
Fast Mode don't works on my NST fw 1.2.1. What app exactly are you using to activated the fastmode?
update: this kernel don't have / sys/devices/platform/omap3epfb.0/graphics/fb0/fmode so fastmode is not possible

tebra said:
Fast Mode don't works on my NST fw 1.2.1. What app exactly are you using to activated the fastmode?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=39529578&postcount=140

Step one, use noogie and do a full backup of your Nook.
It should be almost 2GB file size.
Using noogie, copy uRamdisk.
Use bootutil.exe (in signature):
Code:
bootutil /x /v uRamdisk init.rc
[i]edit init.rc[/i]
bootuil /r /v uRamdisk init.rc
The line you edit out (with a number sign) is
Code:
[color=red]#[/color] setprop service.adb.tcp.port 5555
(uncomment this line to go back to using WiFi ADB)
Copy uRamdisk back to the Nook.
Reboot your Nook.
Read up about getting the ADB drivers working on your desktop here:
http://forum.xda-developers.com/wiki/BN_Nook_Simple_Touch/Installing_ADB

This thread is old, I know, but hopefully someone will spot this. So I took the plunge and installed Multi-Touch (running FW 1.21 and rooted). I followed the instructions for the ADB wireless method and also changed the required_hardware.xml file, resetting the permissions of the edited file to match those of the original.
Nothing is different? My original hope was that the pinch-zoom function in Dolphin 10.2.6 might work with this mod. It doesn't seem to work on either Android or Desktop settings in that browser. I can't see that it works anywhere. Maybe I need to reinstall Opera Mobile and test it there?
...
O.K., I just reinstalled Opera Mobile. No effect at all that I can discern.
Hmm....I am underclocking with No-frills CPU Control to 300 MHz. Is that the problem? Nope....changed back to 800 MHz and no effect.
So...what am I missing? Is there something I can check to be sure I did the ADB thing correctly (after I'm done using the "shell" do I just close it down or is there some closing command I should have used?). Does this mod have to be used in conjunction with something else?

I usually jump out of an ADB shell with ^C
There's an interim release of UsbMode-1.7a.apk in the signature.
If you touch the left 3/4 of the screen it will report touch coordinates.
It will indicate multiple touches.
That's the easiest way to see how many simultaneous touches your device supports.
My Nook: 2, my Kyocera: 4, my ZTE: 5

I installed a multi-touch test app from the Market and it showed that two fingers were recognized (no more), although the recognition was somewhat spotty.
I've been fussing around with it and sure enough it has begun to work with Opera Mobile, both at 800 MHz and 300 MHz (no discernible difference there). It also works very well with Perfect Viewer. It does not work with Google News and Weather (which really needs it), at least not the version that came with NookManager rooting.
Alas, it does not work with Dolphin, which was my main impetus for trying this. I've got Dolphin to the point where it is much more reliable than Opera Mobile but the only way to zoom is via a gesture which requires going to a blank screen, drawing the gesture and then returning to the current page. It makes one want to draw gestures that are not found in children's books. Although Dolphin claims pinch-to-zoom, it doesn't seem to work with the NST, at least not this version of Dolphin. Maybe I need to delve back into the past versions (which will probably be less stable in other respects...).
Well, anyway it works. I'll have to see if it affects the battery life in any significant way (I read on my Nook, too!). If not, I may as well keep it although its utility to me is limited.
Now to look at "no-refresh"......

nmyshkin, what about Google Maps?

Yes, I forgot to mention Google Maps (I was using "Places" but it amounts to the same thing). That works with multi-touch as well. I also noticed that to some extent multi-touch zooming in Opera Mobile is web-site dependent. For example, it does not seem to work at all on Wikipedia but worked OK on some other sites I tried. I just wish it would work in Dolphin
I just tried it with Orion Viewer (which I like for PDFs) and it also works there. It seemed to want to work with Kingsoft Office on the same PDF file but then the app crashed. There are other ways to magnify in both, of course.
I finally tried NoRefresh, and while it worked, I was left wondering what it is for other than as a "we can do this" feature. Lots of flickering while it made up its mind as a white-listed app was launched and then the image degradation thing. After I exited the app my screen was such a mess I had to reboot. I guess I'm used to the way the e-ink display sort of tears when scrolling (or even zooming now, for that matter). The NoRefresh just doesn't seem to give me anything I want. I have not tried FastMode. As I currently underclock to 300 MHz I am reluctant to overclock the Nook just so it will (sort of) work like something it is not and run down the battery really fast.

FireTV as Download Centre

Since the FireTV is always on it is perfectly suited as a Download centre when combined with an external HDD.
At the moment I'm runnig NZBGet mobile to download media from usenet to my external HDD which is mounted using Stickmount. By installing python for android I managed to get VideoSort to work, which is a script which automatically recognizes the TV-Show/Movie for you and names it accordingly, moves it and cleans up any left-over thrash. Works very well so far.
Combined with some usenet indexing site which build rss feeds (or remote push to NZBGet) for any new episodes/movie releases you can automatically download any new stuff which you might want. Some even import any stuff from your Trakt/IMDB watchlist. As XBMC is running on the same machine it is also easy to let XBMC update the library when any new media is added.
Wonder if anyone else has set up anything like this? I looked into installing transmission through optware on the FireTV but couldn’t install optware as it wouldn’t let me remount. Can install uTorrent and control that from your phone but as far as I saw I couldn’t get it to run a cleanup script after any download is done. Really want it to be all automated so for now I’m only using usenet, which I prefer over torrents anyway.

you have just made my day you have no idea. ive been working on getting a renamer to work on my fire tv i already have a torrent based downloader with a custom rss feed to download but i couldnt for the life of me find one.
as for clean up im not quite sure what you mean but this is my setup
Flud run auto download through rss and updates decently when it downloads when its done it will delete the torrent file and there is an option to move the file when it is done downloading
i have my hdd mounted and all files are moved to the uncatagorized folder but after that i i cant sort them so im gonna try your method but a really good app i found is watchdog it auto updates the xbmc library a lot better then anything else
if theres anything i can help with let me know
thanks again
Also flud will delet old items and if its renamed and moved it should be able to delete the old unnecessary folders
so since videosort requires NZB do you know a way to make it work without it?
P.S. Sorry about my grammar its my worst subject and I was more excited to post then check haha

Dragracekid said:
you have just made my day you have no idea. ive been working on getting a renamer to work on my fire tv i already have a torrent based downloader with a custom rss feed to download but i couldnt for the life of me find one.
as for clean up im not quite sure what you mean but this is my setup
Flud run auto download through rss and updates decently when it downloads when its done it will delete the torrent file and there is an option to move the file when it is done downloading
i have my hdd mounted and all files are moved to the uncatagorized folder but after that i i cant sort them so im gonna try your method but a really good app i found is watchdog it auto updates the xbmc library a lot better then anything else
if theres anything i can help with let me know
thanks again
Also flud will delet old items and if its renamed and moved it should be able to delete the old unnecessary folders
so since videosort requires NZB do you know a way to make it work without it?
P.S. Sorry about my grammar its my worst subject and I was more excited to post then check haha
Click to expand...
Click to collapse
The VideoSort script can be modified to work with torrents as well. It uses some variables passed by NZBGet (Download Directory, NZB-name, etc) to process the download. If there is any torrent client for android which allows you to call a script after a download is done and has some way to pass the download location it should work. I don't know of any torrent client on android that does this though. uTorrent, transmission and more allow for this in their Windows clients.
What I did before I got python working was I shared my external HDD with my Windows network using Samba Filesharing. Then I just had a simple batch file setup which would sort the media by using Filebot.

So there isn't an equivalent sabnzbd suite (sickbeard, couchpotato) for the Android fork like you have on openelec?
Sent from my D6503 using Tapatalk

What if we use tasker to trigger an event when a file or folder gets moved to the UnCategorised folder? The event being a Python script that I found called turbo sort it works great.
Also one more thing I would love to get flexget working to scrape rss feeds have you looked into this at all?
I've made a lot of progress on this and the last day I'm somewhat close to making a thread that explains how to make an automated system but I've got to make sure everything works flawlessly first.
Bad grammar this time is due to voice keyboard lol

nzbget version?
I've been messing with nzbget on gbox and fire for some time now. Now gbox has openelec sabnzbdsuite is perfect. Before that was using nzbget and it worked well, however latest version with extraction would start loading on ftv but just hang. I did manage to get old version to run fine but no auto extract. Which version you using? Did you manage to add unrar pp script?

nadimsoze said:
So there isn't an equivalent sabnzbd suite (sickbeard, couchpotato) for the Android fork like you have on openelec?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Not that I know off. Think there is a Sickbeard version for android though. I tried to install SABnzbd through optware on my tablet but couldn't get it to work well with python. You should try NZBGet, works well. Also is less resource intensive. If you combine NZBGet with indexer to automatically add stuff and use the NZBGet post processing scripts to order the media you will basically have sabnzbd/sickbeard/couch into 1 app by just running NZBGet combined with an indexer (I use DogNZB).
Dragracekid said:
What if we use tasker to trigger an event when a file or folder gets moved to the UnCategorised folder? The event being a Python script that I found called turbo sort it works great.
Also one more thing I would love to get flexget working to scrape rss feeds have you looked into this at all?
I've made a lot of progress on this and the last day I'm somewhat close to making a thread that explains how to make an automated system but I've got to make sure everything works flawlessly first.
Bad grammar this time is due to voice keyboard lol
Click to expand...
Click to collapse
The script I use, VideoSort, is a evolved version of the Turbo script. Good idea on Tasker to watch for the folder. Think that should work. You can try it yourself, install Python for Android and use it to run the script.
xokol2lvox said:
I've been messing with nzbget on gbox and fire for some time now. Now gbox has openelec sabnzbdsuite is perfect. Before that was using nzbget and it worked well, however latest version with extraction would start loading on ftv but just hang. I did manage to get old version to run fine but no auto extract. Which version you using? Did you manage to add unrar pp script?
Click to expand...
Click to collapse
The NZBGet version I have already has parcheck and unrarring build in. Only need to add post processing scripts if you want to do more. Atm I have 3 running, 1 to rename a specific format and place them in my tvshow/seasons/episodes folder structure. 1 to notify XBMC and 1 to notify me of new downloads on my phone.
Running this version:
https://play.google.com/store/apps/details?id=com.greatlittleapps.nzbm&hl=nl_NL

The NZBGet version I have already has parcheck and unrarring build in. Only need to add post processing scripts if you want to do more. Atm I have 3 running, 1 to rename a specific format and place them in my tvshow/seasons/episodes folder structure. 1 to notify XBMC and 1 to notify me of new downloads on my phone.
Running this version:
https://play.google.com/store/apps/details?id=com.greatlittleapps.nzbm&hl=nl_NL
Click to expand...
Click to collapse
That's odd, that's same version that just hangs of aftv for me. Maybe time to break it out again and start from scratch.

Can't quite get it to work
Hi Nedle,
Thanks for writing this post I've been scratching my head over this for days.
Ive set up sickbeard for android just for TV post processing with rss feeds from probably the same nzb indexer as you, its a bit hit and miss really because some of the extracted files are labelled 2 folders deep with the parent folder showing the show details, another folder with random characters and then finally the video file with more random characters. It seems like sickbeard will only pick up strangely labelled files in the parent folder and not go digging.
It looks like getting videosort to work could hopefully sort this out, I'm not sure how to get python running properly. Ive tried running the r5 version from the link you gave and the python3 version with no success. I've put the videosort zip in the download folder and tried to import it into python but it pops up with an error. Videosort on Nzbget continues to fail in pp.
What process did you go through to get python to work? I'm sure I must be making a rookie error here
Thanks!

Nedle said:
Since the FireTV is always on it is perfectly suited as a Download centre when combined with an external HDD.
At the moment I'm runnig NZBGet mobile to download media from usenet to my external HDD which is mounted using Stickmount.
How did you that setup? Specifically, the nzbget sideloaded on your aftv? Did you sideload google play store and download directly to your machine? Any help/instructions would be helpful...
Click to expand...
Click to collapse

olliewings said:
Hi Nedle,
Thanks for writing this post I've been scratching my head over this for days.
Ive set up sickbeard for android just for TV post processing with rss feeds from probably the same nzb indexer as you, its a bit hit and miss really because some of the extracted files are labelled 2 folders deep with the parent folder showing the show details, another folder with random characters and then finally the video file with more random characters. It seems like sickbeard will only pick up strangely labelled files in the parent folder and not go digging.
It looks like getting videosort to work could hopefully sort this out, I'm not sure how to get python running properly. Ive tried running the r5 version from the link you gave and the python3 version with no success. I've put the videosort zip in the download folder and tried to import it into python but it pops up with an error. Videosort on Nzbget continues to fail in pp.
What process did you go through to get python to work? I'm sure I must be making a rookie error here
Thanks!
Click to expand...
Click to collapse
Sorry for a very late reaction, didn't see this until now. Scripts will have to be executable, think android doesn't allow this on the sdcard. To fix this all my scripts are located on my external hdd. Furthermore you will need to set the path and call the videosort script from a shell script as it won't work directly (atleast I couldn't).
So in my nzbget scripts folder I have a call_VideoSort.sh script, which calls VideoSort.py. The libraries which VideoSort needs (guessit) I copied to /sdcard/com.googlecode.pythonforandroid\extras\python.
call_VideoSort.sh contains all the Nzbget stuff: The options for format, folder structure, etc. Then at the bottom it simply has:
Code:
export PYTHONHOME=/data/data/com.googlecode.pythonforandroid/files/python
export PYTHONPATH=/storage/sdcard0/com.googlecode.pythonforandroid/extras/python:/data/data/com.googlecode.pythonforandroid/files/python/lib/python2.6
export PATH=$PYTHONHOME/bin:/system/bin:/system/xbin:$PATH
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/data/data/com.googlecode.pythonforandroid/files/python/lib
python "<PATHtoVideoSort.py>"
Let me know if you need any help and I'll see if I can.

jnusraty said:
Nedle said:
Since the FireTV is always on it is perfectly suited as a Download centre when combined with an external HDD.
At the moment I'm runnig NZBGet mobile to download media from usenet to my external HDD which is mounted using Stickmount.
How did you that setup? Specifically, the nzbget sideloaded on your aftv? Did you sideload google play store and download directly to your machine? Any help/instructions would be helpful...
Click to expand...
Click to collapse
Yes, I have the playstore installed and installed NZBGet from there. But you can just sideload nzbget as well, shouldn't be a problem. Downloading stuff is pretty straight forward. If you want to automatically sort your media you will need post processing scripts which require python. That takes a bit more tinkering to work, as you will have to install python and make the scripts executable.
If you get stuck anywhere let me know what errors you get and I'll try to help. You can use http://apps.evozi.com/apk-downloader/ to download the nzbget apk and sideload it.
Click to expand...
Click to collapse