[Q] "Process System is Not Responding" - Droid 2 General

I just installed the latest version of Apex, did a few customizations, then rebooted because I changed the LCD Density. Now, whenever I boot, it says "Process System is not responding". I can force close it, wait, or access the power menu. But, the screen is black, and I can't do anything. This is after a day full of reflashing and wiping because the damn device couldn't receive text messages.

xzillerationer said:
I just installed the latest version of Apex, did a few customizations, then rebooted because I changed the LCD Density. Now, whenever I boot, it says "Process System is not responding". I can force close it, wait, or access the power menu. But, the screen is black, and I can't do anything. This is after a day full of reflashing and wiping because the damn device couldn't receive text messages.
Click to expand...
Click to collapse
If you have a backup try restoring
Sent from my DROID2

How? I'm trying to follow the guides, but whereever I go, the SBF zip is corrupted.

It appears to be working now. I think I'll hold off tinkering with it for a little while. I still would like to know why it did this, though. For now, I'll just restore my apps, but only the ones I use all the time,

xzillerationer said:
It appears to be working now. I think I'll hold off tinkering with it for a little while. I still would like to know why it did this, though. For now, I'll just restore my apps, but only the ones I use all the time,
Click to expand...
Click to collapse
Did you happen to delete any system apps when you were customizing? You might have deleted an app that settings was dependent on by accident, which could cause something like that.
ALWAYS do a nandroid backup before you start tinkering with the phone, it will save a lot of trouble.
Heres how to do it:
1. Boot into clockworkmod recovery using Koush's Bootstrap Recovery
2. Select Mounts and Storage, and mount /system and /data
3. Return to the main menu and select Backup and Restore
4. Select backup and let it work.
5. When its done, return to main menu, and choose to reboot.
Now you can tinker however you want. If you happen to mess something up, return to clockworkmod recovery (hint: if you can't get the phone to boot properly, boot the phone, and pull the battery when you see the M logo. Replace the battery and it should take you to clockworkmod)
1. Boot into recovery
2. Mount your /system and /data again
3. Go back and select Backup and Restore
4. Select restore, and select you restore file (should be the only one if you've only done 1 backup)
5. Let it work, then reboot the phone, and your phone will be in the exact same state as it was when you did the backup.
If you can't get into clockwork, you'll need to SBF.
SBF guide:
http://forum.xda-developers.com/showthread.php?t=770224
SBF Download (download in guide doesn't work):
hxxp://www.mydroidworld.com/forums/droid-2-discussion/5323-tbh-mydroidworld-present-droid-2-2-3-20-triple-threat.html (replace xx with tt)
Hope this helps!

Thanks, that'll really come in useful. The reason I couldn't fix it before is because Moto sucks, and encrypted the bootloader, so I was having a problem getting back into Clockwork. Did I say thanks? Oh well. Thanks.
Sent from my DROID2 using XDA Premium App

Yeah moto does suck for that. They are giving options on future devices to lock and unlock the bootloader though (like the xoom) so at least they are making progress. Doesn't help us though...

xzillerationer said:
I just installed the latest version of Apex, did a few customizations, then rebooted because I changed the LCD Density. Now, whenever I boot, it says "Process System is not responding". [... ]
Click to expand...
Click to collapse
Are you using Droid 2 Overclock? I'm asking because it allows setting screen density. I found that the new startup scripts added to Apex 1.4.1 don't play well with OC settings that were fine on Apex 1.3. The scripts add sysctl and CPU tweaks.
I set my OC settings to more conservative settings, and it has been far more stable. This isn't a knock against either product. Both work fine together with a bit of work.
Fab did release a test release (1.4.2 seems to be the informal name) that doesn't launch his new startup scripts automatically, and that's what I'm currently running.
- Bob

bobstro said:
Are you using Droid 2 Overclock? I'm asking because it allows setting screen density. I found that the new startup scripts added to Apex 1.4.1 don't play well with OC settings that were fine on Apex 1.3. The scripts add sysctl and CPU tweaks.
I set my OC settings to more conservative settings, and it has been far more stable. This isn't a knock against either product. Both work fine together with a bit of work.
Fab did release a test release (1.4.2 seems to be the informal name) that doesn't launch his new startup scripts automatically, and that's what I'm currently running.
- Bob
Click to expand...
Click to collapse
Aye, I am. It seems fine most of the time for me. However, I've only been running for a few days, and have barely rebooted.
Sent from my DROID2 using XDA Premium App

I am had luck with 1.4.2 by setting my OC values to defaults before doing my pre-flash backup with Titanium Backup. After flashing, I was able to restore everything, including OC (default) values.
I also disabled the CPU tweaks Apex puts in /etc/init.d scripts, and and re-run QuickClock Advanced to recalculate my clock and voltage settings and imported those into Droid 2 Overclock.
So far (5 hours), it's been solid. If you don't want these issues, stick to Apex 1.4.0 for now. It was very stable.
- Bob

Related

Z4root

So I looked into z4root on the market and what is the difference between temporary root and permanent root ( I know the difference between temp and permanent ) just would like to know what they do differently to the phone.. also if I root is it necessary to back up with titanium?
Sent from my DROIDX using XDA App
Temporary root is going to root your phone for "1 session". Or in other words -you hit "temp root" and Z4 will root your phone. But when you reboot- you will no longer be rooted. Now- if you download apps from the market the require root access- those apps are not going to disappear when you reboot your phone- but you will not be able to use them until you root again with Z4.
Permanent root means that when you reboot your phone you will retain root. It does not mean that your phone will be permanently rooted. Z4 has an unroot button (i believe) so if you ever have warranty issues- you unroot and uninstall any root applications before having the phone serviced (or do he infamous sbf).
If you root your phone you do not have to use Titanium backup. Titanium backup backs up applications and their data only (both system apps and user apps). Titanium does not create a "nandroid", or a full complete restorable back up copy of your entire phone. To do that you use another app. You can search the market for Droid X Bootstrap Recovery. You use that app to boot into recovery and create a nandroid of your phone.
But you don't have to do any back ups at all if you don't want. But the good thing about having a back up is if you mess something up- you can restore to a functioning copy. If you screw something up and dont have a back up- you have to perform the sbf. If you don't know how to do that then you would have to make a visit to Verizon so they could restore the phone for you.
Sorry for the long post -especially if you knew all that already.
No no that helped alot man... thanks...so I dled rom manager and all what next just download the rom and im good to go?
Sent from my DROIDX using XDA App
Also how do you create a nandroid backup?
Sent from my DROIDX using XDA App
hullie10 said:
No no that helped alot man... thanks...so I dled rom manager and all what next just download the rom and im good to go?
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Ok - first of all - be careful. I don't want to sound preachy or condescending- but I don't want you to brick your $500 phone either.
1. Make your nandroid back up before you install any rom. If you can get that figured out, then you are on your way. It took me a while just to figure out how to work that app.
2. I guess a lot of people install rom's through rom manager (obviously). I never install roms from there. I download them from there- but I do not install from there. I use the Bootstrap recovery app to install rom's. That is just the way I do it. All the real clear instructions were through Bootstrap app so that's how I went about it.
Not sure if you figured out the Bootstrap recovery app yet and I was real confused by it so here is my best run down from memory...
1. open it.
2. hit "bootstrap recovery". You will get a "success" dialog box and you hit ok. If you don't get it something has gone haywire.
3. Hit "reboot recovery". Your phone will reboot into a funky green screen that renders your touchscreen inoperable. So you have to navigate the screen with your hardware buttons.
the volume rocker is for cursor up/down
the red camera button is for select or enter
the back button will take you back a screen (so when you have done what you need to do -hit the back button until you get back to page 1 and you can "reboot now").
here is another hint about recovery that has messed a few people up. some of the rom instructions tell you to "...go to 'mounts and storage', mount data, wipe cache..." (actually I just visited a few rom threads and it looks like they have cut this confusing step out) -well if it says 'mount data' it means that you have to mount it - not that it already is. If the data is mounted it will actually read "unmount data". Like I said -very confusing to me - but it looks like this is a non-issue for the most part now.
also i would advise you of this - DO NOT USE a rom based on the brand new leak. That is just my advice. Lot's of people are - but there is no safety net there. There is no sbf for the new leaked stuff. Stick with roms based on 2.3.15 ota. again- just my .02. I guess a lot of people would advise you not to root and not to flash a rom at all - so in the end you got to do what you want.
I loved the Rubix series roms. I never used his "blurry" versions but did use 1.0, 1.6, 1.8.6 Focused. But found that I actually like roms that used the blur framework-res.apk because they just seem to work better. So I am using Apex 1.2 for 2.3.15 and really like it.
So- there is some more info for you.
I appreciate your help but once I use bootstrap...what/how do i do what I'm supposed to do
Sent from my DROIDX using XDA App
Sorry for all the questions, I just don't want to brick my phone cuz that's all my brother is talking about but once I get it down I feel like he might make me root his phone and load a new rom... so im just trying to cover all my bases
Sent from my DROIDX using XDA App
hullie10 said:
I appreciate your help but once I use bootstrap...what/how do i do what I'm supposed to do
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
hullie10 said:
Sorry for all the questions, I just don't want to brick my phone cuz that's all my brother is talking about but once I get it down I feel like he might make me root his phone and load a new rom... so im just trying to cover all my bases
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Ok- I am going to Private Message you my email so the communication process goes faster. But I am by no means an expert at android. I was really into Windows Mobile until the last couple of months but was fed up with what MS did with Phone7 -so I just made the jump to android.
To create your nandroid (your back up)...
1. Open Droid X Bootstrapper.
2. Click "Bootstrap Recovery".
3. Get the "Success" message. Click "OK".
4. Click "Reboot Recovery".
5. Your phone will reboot into recovery (not the factory recovery -a hacked recovery).
6. Use the volume rocker to move down to "-backup and restore".
7. Use the red camera button to hit enter.
8. A new screen will open and your cursor will already be on "Backup".
9. Use the camera button to hit enter.
10. Your phone starts the backup process (black screen with a small open box and a little android). It takes about 5 minutes to complete the backup.
11. When it is done you will get a "Backup complete!" at the bottom and will it will automatically go back to the first page and your cursor will be highlighting the "-reboot system now" option.
12. Press the red camera button to hit "enter".
13. Your phone will reboot.
14. You have created your nandroid
If you dont have the app "Root Explorer" you need to give up the couple of bucks or whatever it is and get it. I can try some free file explorer apps and see how they work for you -but Root Explorer is worth the $ and I will refer to it in instructions.
Flashing the rom... I will use an example for this rom...
http://www.droidforums.net/forum/droid-x-roms/100709-rom-apex-1-2-droid-x-functionality-performance.html
It is the rom I am using. It is stable and functional. It uses the ADW.Launcher as a home replacement for Blur.Home.apk -so if you are not familiar with it it takes some getting used to (a little complicated as far as all the settings). It also uses the AOSP text messaging which I do not like (but it can be changed back to Blur.
You can use whatever rom you want- but the instructions will not be exactly the same. Whatever rom you decide on -MAKE SURE YOU FOLLOW THEIR INSTRUCTIONS NOT MINE! Usually the first post of the rom thread will contain pretty clear instructions.
START WITH A FULL BATTERY!! I TAKE NO RESPONSIBILITY BLAH BLAH BLAH...
For example from the above thread...
-Place file on your sdcard. Bootstrap recovery and reboot recovery
-Navigate to mounts and storage. FORMAT data, and cache
-Return to previous menu and install .zip from sd card
-Choose ApeX and install!
Click to expand...
Click to collapse
1. Download the rom.
2. If you use rom manager to download -you will have to find the rom which will be in a .zip file and it will be in some weird place in your phone's SDCard like
/sdcard/clockworkmod/download/fabdroid.com/downloads/
so you will have to move it to the root of your sdcard (meaning not inside any file folder -just on the sdcard.
3. So if you dont want to deal with that you can download from your computer and then place on your sdcard.
4. Open "Droid X Bootstrapper".
Click "Bootstrap Recovery".
5. Get the "Success" message. Click "OK".
6. Click "Reboot Recovery".
7. Your phone will reboot into recovery.
6. Use the volume rocker to move down to "-mounts and storage".
7. Use the red camera button to hit enter.
8. Use the volume rocker to move down to "-format data".
9. Hot enter.
(From here I am working on memory as I do not want to physically reflash the rom - so the instructions will not be quite as 100%)
10. You will get a "Are you sure?" message.
11. Go down to it and hit enter.
12. The phone will take a moment to format the data.
13. Use the same process to "-format cache".
14. Use the back button (the physical hardware back button) to return to the previous screen.
15. Go down to "-install zip from sdcard"
16. Hit enter.
17. Now all the files on the root of your sdcard will be listed. It is crucial that you placed the unzipped rom file on the root of your sdcard so that you can now choose it from the list. If there is no file to choose -you just completely screwed up and will have to perform the sbf. So hopefully you don't do that.
18. Use the volume button to select the Apex rom.
19. Hit enter (the camera button - I can't remember if you get a warning here - if you do - of course you want to confirm that you want to move on).
20. The new rom will load up.
21. If it does not automatically reboot then "-reboot system now".
The first boot up will take longer than usual. You will have to set up your phone all over again. If you have set up your phone properly then all your apps will download from the market automatically. If you have not set up your phone to do that than you will have to manually find your apps and download them.
Hopefully you are using Google to store your contacts and not Backup Asistant and the regular phone contacts. If you are using Google then your contacts should automatically be added back. If not then you are on your own bc I don't mess with Backup Assistant.
That is the best I can do with out physically flashing the rom and...
EVERY ROM HAS ITS OWN SPECIFIC INTRUCTIONS
You can use this as a guide but make sure you do what the rom developer says.
Here is the link for RSDLite 4.9...
http://dl.dropbox.com/u/7782384/RSD%20Lite%204.9.rar
Thanks alot man I flashed zapx bazinga 1.6 on my phone with your help and some luck of mine.... I made a nandroid of my phone this morning cuz I got bored in class and decided to just go for it.... and then I dled the zip file and put it on my sd card... used astro to make sure it was there... only for it not to show up when I wanted to load the zip file... while sweating bullets I restored my phone... and then put the zip file in a folder I created and did it again but I made sure I could find it while in recovery before I proceeded...... phew
Sent from my DROIDX using XDA App
good for you man. If zapX doesn't work out for you - or if you want to try something different - I can recommend the Apex rom, it has been very stable. Just make sure you dl the correct version. There is a version for the leak and a version for stock 2.2.

[Q] Please help.

I'm a complete noob when it comes to ROMs / Apps / Themes, basically smart phones in general. Just got a Droid X for Christmas.
Thinking of using a ROM like Gummyjar2.5 or Rubix(don't know best version) because they seem to be very popular here. Anyone have any links for tutorials on installing either / both? And opinions to which would be better for a total noob? I want my phone to run faster / use less battery but still look pretty flashy.
As for themes, does anyone know where I can go to check out themes for the said two ROMs?
Thanks in advance for the help.
Roms are a mattet of how each person likes the feel of it for themselves. Right now, gummyjar 2.5, rubix 1.9.5, and liberty 1.0 are the usual choices. If you still want blur elements like you have it right now, then I suggest zapX bazinga, or apex.
All the roms run very well, but like I said, try out each. You will want to root the phone using z4root (google for it vers 1.3.0)
Then you will want to download droidx bootstrap. This will allow you to backup/restore your phone. It is also used to install the *.zip themes and ROMs.
As for themes, I recommend any of Bignadad's themes. He is the most thorough as far as complete images for framework and apps as well! Make sure that the theme you pick is compatible for any ROM you choose to use.
When I get back to a computer instead of my phone I can try and help out more =)
Ps... Look at the thread for each ROM/theme to see what you like and they will almost always include install instructions!
Hope this helps! Post back if you have more questions, I'm more than happy to help!
Sent from my DROIDX using XDA App
Sent you a pm
Sent from my DROIDX using XDA App
Ok, to start with.. No worries, we all had a point where we knew nothing about this stuff!
Blur is an "interface add-on" that motorola has added to their phones. If you were to look at the Nexus One or Nexus S, these two phones both have a stock version of android without Motorola Blur or HTC Sense on them. Sense and Blur are modifications of system applications and the user interface... Some people really like these interfaces, but most people are against it in the Android forums because they are mostly wanting performance (which is usually degraded by Sense or Blur).
Most of the ROM's now strip out the blur components (yay for our devs!) and that is what GummyJar, Liberty, and Rubix do. If you want a ROM with blur components, I would suggest using Apex or ZapX Bazinga.
2. That z4root and backup thing you said to download. Do I do that with my phone and just launch them? Or?
I have attached the z4root and droid X bootstrap .apks. What you need to do is copy these to your phone's sdcard. Then go to Settings-->Applications--> Check the Unknown sources check box. While you're at it press on the development section as well. Then check the USB debugging box.
You can then install these using a File manager such as Astro (free on the market) by opening Astro File Manager, and then browsing to the .apk file on your sdcard.
To root your phone after installing z4root, launch the app from your applications list, and then click permanent root. It will take a while (potentially) and then your phone will reboot and be rooted.
After that, then go to Astro and browse for the bootstrap apk and install that. This is what allows you to backup/restore. After that app installs, you will be prompted for superuser rights, hit yes.
Then open Droid X bootstrapper. You will want to click the top option, as that hijacks the boot process. Then reboot recovery will allow you to go to the backup/restore mode.
Check out this link: droid X wiki. I have to go take care of some stuff, but will add another post with some stuff.
3. Where do I find the threads for the specific ROMs / Themes?
http://forum.xda-developers.com/forumdisplay.php?f=687
Use this link. This is the general Droid X thread page. The general section is just mostly questions and "general" stuff for the Droid X. The themes sections has themes.. lol and the android development has the ROMs.
Just read through the different threads and post back if you have questions.
So what does rooting my phone do? I get what backup / restore is, but not that.
This z4 is taking forever. -_-
So I went to sleep while z4 did its magic and it wasn't running when I woke up. How would I know it x completed?
Sent from my DROIDX using XDA App
EDIT: Also, when I installed bootstrap, it didn't ask me the question you said it would. Now it's showing an error when I want to do "Bootstrap Recovery". Tried uninstalling and reinstalling and that didn't work.
Sophrosyne said:
So I went to sleep while z4 did its magic and it wasn't running when I woke up. How would I know it x completed?
Sent from my DROIDX using XDA App
EDIT: Also, when I installed bootstrap, it didn't ask me the question you said it would. Now it's showing an error when I want to do "Bootstrap Recovery". Tried uninstalling and reinstalling and that didn't work.
Click to expand...
Click to collapse
Reboot your phone, re-run the Z4root program (phone will reboot) and after you should have a GREY Super User icon in your app drawer.
Hope this helps.
That worked, man. Thanks! So I have Bootstrap, z4 and ROM manager all ready. Now I just need to get a ROM and find one that has a slick THEME.
How do you like Liberty, Sys? I saw it was just something you put over the top of Gummyjar, which was probably the one I was going to go with if Bignadad (by the way, I don't know where to find his themes. =/) had a cool theme for it. Have you tried Rubix?
EDIT: I love Swype. Are these ROMs going to take it away from me? =P
I think many will agree that Liberty 1.0 seems to be the sweetest right about now..... try it out.
Got Liberty up successfully, but don't know how to retrieve my contacts.
hey i have one question, when z4 is done and you run bootstrap, the phone is empty of apps and contacts...and you have to do a backup from somewhere correct?
havensed said:
hey i have one question, when z4 is done and you run bootstrap, the phone is empty of apps and contacts...and you have to do a backup from somewhere correct?
Click to expand...
Click to collapse
So you already have loaded liberty? Just trying to make sure I have my details straight. If you followed the install instructions and wiped data and cache then yes you will need to restore apps from titanium backup or whatever means you may have backed up your apps.
If you load a ROM such as liberty, then you will not want to use bootstrap to restore. Bootstrap completely backs up your entire phone state, not just your apps. Sorry if I misinterpretted any part of your message
Sent from my DROIDX using XDA App
So I've loaded Liberty, but can't "Link" facebook contacts to their phone numbers. Is there some option I need to enable to do this? Or should I go back to vanilla? That's a convenience I don't really intend to do without.
Sophrosyne said:
So I've loaded Liberty, but can't "Link" facebook contacts to their phone numbers. Is there some option I need to enable to do this? Or should I go back to vanilla? That's a convenience I don't really intend to do without.
Click to expand...
Click to collapse
Is facebook installed on your phone? If not install it from the market and the initial setup should ask you if you want to set up facebook sync.
If facebook is installed to go phone settings->accounts and sync. Your facebook account should show up there and you can setup sync options.
Sent from my DROIDX using XDA App
Yeah, I have no problem with having my Facebook contacts in my contacts list, but I used to be able to link them with their phone contact. Meaning if I had a person's phone number, I could link it with their Facebook profile so their phone number would display their facebook default pic and latest status. Now, when I try to edit facebook contacts and add a number to them, it says I can't do that with this device.
Sophrosyne said:
Yeah, I have no problem with having my Facebook contacts in my contacts list, but I used to be able to link them with their phone contact. Meaning if I had a person's phone number, I could link it with their Facebook profile so their phone number would display their facebook default pic and latest status. Now, when I try to edit facebook contacts and add a number to them, it says I can't do that with this device.
Click to expand...
Click to collapse
Hm... I haven't really messed around with this much, as I haven't had to add/edit contacts lately... All my contact info is backed up to my gmail account...
I will try and toy with this the next couple of days and get back to you.
If anyone else has info on this... Please chime in!
If I want to go back to vanilla to re-do it, back it up, and then come back to liberty, do I have to download the vanilla zip? Or is there any way to just revert?
Also, I need a cool theme. Reg Lib is too boring. ;]
Sophrosyne said:
If I want to go back to vanilla to re-do it, back it up, and then come back to liberty, do I have to download the vanilla zip? Or is there any way to just revert?
Also, I need a cool theme. Reg Lib is too boring. ;]
Click to expand...
Click to collapse
Sorry, slightly confused by your post... But I think I may have what you mean.
If you want to go back to vanilla (original phone condition) then you will need to sbf if you didn't take a backup before installing Liberty. If you did take backup using Boostrap, then I would recommend just restoring your backup.
If you didn't create a backup before... create a backup now with liberty installed in case you need a place to come back to for reference. Nandroid backups are your friend...
I'm not quite sure what you mean by vanilla, so I may be way off here. Feel free to add in some more details please =)
Yeah I mean I want to go to the completely original phone setup. I did do a bootstrap save or whatever, but bootstrap isn't installed. If I reinstall does it still have my vanilla Droid saved?
Also, how would I go about switching back to it? Navigating those menus makes me nervous.... Haha.
I'd go into Bootstrapper -- > Reboot Recovery... then what?
Sophrosyne said:
Yeah I mean I want to go to the completely original phone setup. I did do a bootstrap save or whatever, but bootstrap isn't installed. If I reinstall does it still have my vanilla Droid saved?
Also, how would I go about switching back to it? Navigating those menus makes me nervous.... Haha.
I'd go into Bootstrapper -- > Reboot Recovery... then what?
Click to expand...
Click to collapse
Okay... So if you have taken a backup before you did your install of Liberty (or any other ROM/Theme) then yes, it should still be saved on your SDcard actually. Bootstrapper creates a folder on your sdcard called "clockworkmod". Inside of that folder, there should be two more folders: backup and download. Inside of the backup folder, you should see a folder titled in a similar manner:
2010-09-10.04.03.48 (yyyy-mm-dd-hh.mm.IDK what the rest is.. LOL)
But regardless, this is what you should see. If you re-install the bootstrap program, then when you go reboot recover--> backup and restore--> restore, you should see this folder/option. You will use the volume up and down buttons to move the cursor up and down. Pressing the camera button (red) will select the highlighted option. You can use the back arrow key or power button to go up a level in the menus.
If this doesn't work, you can always SBF the phone (this takes the phone back to the complete original condition out of the box). It is slightly scary to do the first time (at least for me it was...), but I have probably done it at least 10 times now.
Let me know if the bootstrap backup works. Take note that you will lose any apps/texts on your phone that you now have unless you use an app like titanium backup to backup your apps, and an SMS backup app to save your text messages. The bootstrap backup takes you back to the exact condition the phone was in when you took the backup.
Lemme know if this works out for you! Good luck!

[ROM][2.1] Eclair Strikes Back v2 [2011.06.23]

Since there's been some interest in comparing the 2.2 ROMs with the 2.1, here are some stock eclair nandroid images based on the Cincinnati Bell 2.1 ROM that can be used in OpenRecovery without flashing SBFs. You can use these to switch between 2.1 and other 2.2 ROMs without bothering with RSD Lite/sbf_flash.
Of course gallery key, camera and FM radio work well on these. Although, I've been having market problems (paid apps fail to download). Hopefully that will resolve itself if/when market decides to self-update... In the interim, I recommend using something like Titanium Backup to migrate your paid apps.
Eclair Strikes Back v2 (2011.06.23)
This is a tweaked version of CBW_eclair_STR_U2_04_1E_1.zip with some tricks we've been using in 2.2 (expanded apns-conf.xml, JIT from FrozenEclair, memhack to move dalvik-cache to /cache, egl.cfg hack to disable software rendering).
eclair-strikes-back-v2-beta.zip (the beta is now final )
Changes since v1:
ext-partition support compatible with the stock221-derived ROMs*
Automatic swap support for fjfalcon's fastboot kernel
Automatic support for link2sd (either FAT extra partition or stock221's /sd-ext/link2sd method)
Additional cpu governors (conservative, interactive)
Market upgraded to 2.2.7
*dalvik-cache on /sd-ext is not supported by default on this ROM.
Previous release: Eclair Strikes Back v1
eclair-strikes-back.zip
2011-06-16 Update to fix market on ESB v1 (upgrades market to 2.2.7)
Stock 2.1 (Cincinnati Bell)
This is a rooted version of Cincinnati Bell's STR_U2_04.1E.1 with OpenRecovery support pre-installed.
CBW_eclair_STR_U2_04_1E_1.zip
Hey Mioze do you have the app2ext script that is in the Bluesteel rom? Might try your eclair nands with it and see what i get.
I've finally successfully downloaded and installed a paid app from the market now on Eclair Strikes Back. Market is still old one though... not sure why it's taking so long to update to new one. When I did a factory reset on stock 2.1 soon after I bought the phone the market updated itself pretty quickly IIRC.
Still, this feels so smooth and fast....
EDIT:
And don't seem to be having downloading issues with any apps, be it paid or free anymore. Maybe you'll have to manually replace the market.apk with the new one though, since I'm not sure it's ever going to self-update.
syrenz said:
I've finally successfully downloaded and installed a paid app from the market now on Eclair Strikes Back. Market is still old one though... not sure why it's taking so long to update to new one. When I did a factory reset on stock 2.1 soon after I bought the phone the market updated itself pretty quickly IIRC.
Still, this feels so smooth and fast....
EDIT:
And don't seem to be having downloading issues with any apps, be it paid or free anymore. Maybe you'll have to manually replace the market.apk with the new one though, since I'm not sure it's ever going to self-update.
Click to expand...
Click to collapse
And what about moving applications to the sd? available or will be applied app2sd?. Open recovery will still work? I have some applications that are supported only from 2.2, they can no longer be installed .... of course there will have to sacrifice something.
I at the continuing problems of delay in opening and closing apps, malfunction of the camera, out of trouble and delay an application to load the launcher and would return to around 2.1, but I also like the space for application installation and open recovery.
PS: It's easy to return to 2.1?
download on process
kinda miss the haptic feedback hahaha..
thx a lot Mioze..
I'm pretty sure you can only move apps to SD for 2.2... since I never used it (I never have so many apps installed at once that it's neccesary) I don't mind losing that functionality.
There are a few apps from 2.2 that I like, most notably the new gmail and youtube apps, but those are minor sacrifices for me really.
Open recovery is installed in both those links. I find the camera works much better on 2.1, seems much faster in taking and processing pictures.
In any case, it is indeed very easy to return to 2.1 and then return back to a 2.2 ROM if you don't like it. You take one of those links (I'm using eclair strikes back) and flash it through nandroid just as you would any other ROM that we have here. And you can flash back the same way if you don't like it.
Be advised, there are currently some issues around the android market for some reason (just see the posts above)... I'm thinking we might have to replace the market apk.
Anyways, I personally am loving it.
EDIT:
Oh, you might have to setup the APN's as well.
Tavinsky said:
And what about moving applications to the sd? available or will be applied app2sd?. Open recovery will still work? I have some applications that are supported only from 2.2, they can no longer be installed .... of course there will have to sacrifice something.
I at the continuing problems of delay in opening and closing apps, malfunction of the camera, out of trouble and delay an application to load the launcher and would return to around 2.1, but I also like the space for application installation and open recovery.
PS: It's easy to return to 2.1?
Click to expand...
Click to collapse
I intend to make an updated eclair-strikes-back to add app2ext support and additional governors but I probably won't have time until later in the week. I view link2sd as the eclair equivalent of froyo's native app2sd, though. Link2sd may already work with fat as the second partition, but I haven't tested it yet because of the market problem. The market problem is #1 on my list when I get time.
And yes, these 2.1 ROMs will keep OpenRecovery intact and you can just flash between 2.1 and 2.2 ROMs the same way you would switch between 2.2 ROMs.
Thanks for the work Mioze7Ae! Let's try it, you know, always gives a bit of fear making a mistake, but gradually removes the fear. I do not know that flashing. It's like applying an Update? I apply a copy nandroid?
Tavinsky said:
Thanks for the work Mioze7Ae! Let's try it, you know, always gives a bit of fear making a mistake, but gradually removes the fear. I do not know that flashing. It's like applying an Update? I apply a copy nandroid?
Click to expand...
Click to collapse
I know how you feel. I always used to have fear/apprehension when flashing a ROM. I've done it enough times now that it's all gone by now though.
Anyways:
Download the ROM. Unzip it. Copy and paste the folder (should contain 4 things in it boot.img etc...) into your SD card under OpenRecovery/Nandroid/ (if you've gone to a 2.2 ROM you should see that ROM in the same place where you're putting this). Anyways, launch open recovery and do recovery boot or hold volume up while pressing power on (if your phone is off). If you get an image and nothing happens, you may have to go into open recovery and select install recovery system before doing this - if you have a bunch of weird pictures in your gallery including Darth Maul then you don't have to worry about this. Then navigate - using the volume keys to move up and down and the camera button to select - to Nandroid, select restore, select Eclair strikes back, select restore all. Once that's done, make sure to wipe data/factory reset and then wipe/clear dalvik cache and cache. Then reboot and it should work. (First reboots are long).
You may have to setup your APN's also.
Excellent. Thanks, sounds simple ... downloading ..... then tell how it worked.
syrenz said:
it boot.img etc...) into your SD card under OpenRecovery/Nandroid/ (if you've
Click to expand...
Click to collapse
They actually go in nandroid/openrecovery/, it's the updates.zip that go in OpenRecovery/updates/ so it's easy to remember that wrong. I'm always adb push'ing to them so I only noticed the mistake because I've got the muscle memory from typing them all the time. Gotta love the consistency
hey mioze7ae, using it right now btw, is it possible to change the read_ahead settings to 2048 instead of 128? i can manually replace the file but once reboot, it changes back.
thanks!
Manual market update
I replaced /system/app/Vending.apk with the 2.2.7 com.android.vending.apk found here:
http://forum.xda-developers.com/showthread.php?t=875067
After doing this and rebuilding dalvik-cache I have the new market and I am able to install paid apps! I'll make an update for it tomorrow, I have to crash.
Two things you can get from market before you flash. APN backup/ restore and SD speed Increase. You can backup your APNs and then once you get to the eclairs, restore them. SD Speed Increase will kick up your SD cache to 2048, instead of 128. Both are free.
Woodrube said:
Two things you can get from market before you flash. APN backup/ restore
Click to expand...
Click to collapse
Much appreciated... Didn't know there was such an app and it's a pain to re-enter all that stuff...
syrenz said:
I know how you feel. I always used to have fear/apprehension when flashing a ROM. I've done it enough times now that it's all gone by now though.
Anyways:
Download the ROM. Unzip it. Copy and paste the folder (should contain 4 things in it boot.img etc...) into your SD card under OpenRecovery/Nandroid/ (if you've gone to a 2.2 ROM you should see that ROM in the same place where you're putting this). Anyways, launch open recovery and do recovery boot or hold volume up while pressing power on (if your phone is off). If you get an image and nothing happens, you may have to go into open recovery and select install recovery system before doing this - if you have a bunch of weird pictures in your gallery including Darth Maul then you don't have to worry about this. Then navigate - using the volume keys to move up and down and the camera button to select - to Nandroid, select restore, select Eclair strikes back, select restore all. Once that's done, make sure to wipe data/factory reset and then wipe/clear dalvik cache and cache. Then reboot and it should work. (First reboots are long).
You may have to setup your APN's also.
Click to expand...
Click to collapse
I just want to check; is it completely safe to remove those wierd pics in the gallery?
androidlover123 said:
I just want to check; is it completely safe to remove those wierd pics in the gallery?
Click to expand...
Click to collapse
Yes. But if you have to use open recovery for whatever reason, you'll need them. You can either click install recovery as needed (which creates the pics) and delete them after, or the best thing to do is get an app that just hides the pics from gallery - so they are there when you need them, but don't interfere. I saw an app "Gallery Excluder" or something floating around in the XDA Android Apps section - that would work. Or a gallery like QuickPic let's you hide things as well.
EDIT:
Nevermind, Gallery Excluder hides folders only. There are other apps though, I believe.
Just an update on progress with ESB
I've done some testing and Link2SD already works with the released eclair-strikes-back but currently only when using FAT for the second partition.
To get ext support in, I'm trying to get the darktremor a2sd scripts to work. They look high quality and robust and should handle swap gracefully when booting the custom kernel as well (current status--some rare hung boots with a flaky SD card when using the latest beta scripts, will try the stable release next). There's also a GUI in the market for managing the SD card (currently only Froyo+, I'm inquiring whether the developer can add eclair support).
Mioze7Ae said:
Just an update on progress with ESB
I've done some testing and Link2SD already works with the released eclair-strikes-back but currently only when using FAT for the second partition.
To get ext support in, I'm trying to get the darktremor a2sd scripts to work. They look high quality and robust and should handle swap gracefully when booting the custom kernel as well (current status--some rare hung boots with a flaky SD card when using the latest beta scripts, will try the stable release next). There's also a GUI in the market for managing the SD card (currently only Froyo+, I'm inquiring whether the developer can add eclair support).
Click to expand...
Click to collapse
I am hoping that the ext will come through. If I am using the sd-ext/app folder on the Steelblue ROM, can I leave all my apps in there and flash your eclair with ext support (when ready) or will I have to use Titanium-migrate? I would think that it really wouldn't matter for most of the apps, except FroYo specific ones like Flash 10.3 but not sure.
p.s. Are you going to call your next version "Return of the Eclair"?
MD5 Check failed. Does this have something to do with the fact that I bought my phone in the middle east?

[Q] Rooted CM7, no market Missing Apk(s)

Hi.
My nook color was on 1.4 (latest bn update), I dual boot it with cm7 following this set of instructions - youtube.com/watch?v=OxDEZ1Fc6iE
when started, the android guy didn't appear and it didn't ask to log in to my google account. in the menu, there's no market.
went to settings - manage applications - there's no google service framework nor market.
I then rooted it instead with cm7 again following - youtube.com/watch?v=lmmmm8cBpe0
same thing, no google service framework, no market.
I've dual booted, rooted, unrooted to 1.0, rooted, over and over again but no luck. I doubt there's something wrong with the files, is it not reading/installing it properly? I downloaded the files through the right links multiple times.
since then, I tried all sorts of ways to try to download the apps but nothing works as well. I also tried installing the files individually (google service framework, onetimeinitializer, setupwizard, talk, vending) but it keeps saying "Application not installed."
Once I did manage to download market, but when I open it, it just gets out and crashes.
Is there another way to root it with a sure way of having market on it? or what am I doing wrong?
Please help. ): I'm not an expert with all these things so if you could explain it in simple terms.
So are you running from an SD card? Did you download gapps.zip and put it on the boot partition?
Sent from space
yes, I rooted from an sdcard. I followed the exact instructions on the video - (youtube.com/watch?v=lmmmm8cBpe0) Is something missing? Am I suppose to partition the sd? By my understanding, partition is something like splitting the memory on the sd? is it?
Sorry, I'm a real beginner on this.
Well the video you followed on Failtube has you installing to your internal memory. Did you flash the google apps zip while in clockwork?
Sent from space
messengerback said:
Hi.
My nook color was on 1.4 (latest bn update), I dual boot it with cm7 following this set of instructions - youtube.com/watch?v=OxDEZ1Fc6iE
when started, the android guy didn't appear and it didn't ask to log in to my google account. in the menu, there's no market.
went to settings - manage applications - there's no google service framework nor market.
I then rooted it instead with cm7 again following - youtube.com/watch?v=lmmmm8cBpe0
same thing, no google service framework, no market.
I've dual booted, rooted, unrooted to 1.0, rooted, over and over again but no luck. I doubt there's something wrong with the files, is it not reading/installing it properly? I downloaded the files through the right links multiple times.
since then, I tried all sorts of ways to try to download the apps but nothing works as well. I also tried installing the files individually (google service framework, onetimeinitializer, setupwizard, talk, vending) but it keeps saying "Application not installed."
Once I did manage to download market, but when I open it, it just gets out and crashes.
Is there another way to root it with a sure way of having market on it? or what am I doing wrong?
Please help. ): I'm not an expert with all these things so if you could explain it in simple terms.
Click to expand...
Click to collapse
My connection is horrible for video right now so please forgive me for not watching the video... did you include the latest GApps.zip and install that too?
Put the latest GApps*.zip on a sd card and install using ROM Manager.
koopakid08 said:
Well the video you followed on Failtube has you installing to your internal memory. Did you flash the google apps zip while in clockwork?
Sent from space
Click to expand...
Click to collapse
sorry, am I not suppose to install it to internal memory? I don't really get it. I flashed CM7 zip then the gapps.
vessamj said:
My connection is horrible for video right now so please forgive me for not watching the video... did you include the latest GApps.zip and install that too?
Click to expand...
Click to collapse
yup, I did.
hwong96 said:
Put the latest GApps*.zip on a sd card and install using ROM Manager.
Click to expand...
Click to collapse
yup I tried doing that too. the files still didn't appear.
Okay, I managed to install CM7 and market! I followed eyeballer's guide at forum.xda-developers.com/showthread.php?t=1030227&fb_source=message through Koopakid08's link on his/her signature.
There was market on it and it opens. but doesn't start dowloads. I did the usual of delete the caches, reboot and now, it downloads fine.
I then overclocked it with www.youtube.com/watch?v=8mvwmx9qSZY guidance. not much of a guide but i managed to find the files and installed. but it overclocked to 1.1ghz, not 1.3. I don't really mind, but just wondering what I did wrong.. I'm thinking of trying it again but using the latest phiremod 7.1. I used the old 6.1 yesterday instead because I wasn't very sure.
So, now my question would be do I have to revert it back to cm7 then overclock it again? or can I just do it over what I've already done? or must I start from scratch, unroot, root to cm7 then overclock?
messengerback said:
sorry, am I not suppose to install it to internal memory? I don't really get it. I flashed CM7 zip then the gapps.
yup, I did.
yup I tried doing that too. the files still didn't appear.
Okay, I managed to install CM7 and market! I followed eyeballer's guide at forum.xda-developers.com/showthread.php?t=1030227&fb_source=message through Koopakid08's link on his/her signature.
There was market on it and it opens. but doesn't start dowloads. I did the usual of delete the caches, reboot and now, it downloads fine.
I then overclocked it with www.youtube.com/watch?v=8mvwmx9qSZY guidance. not much of a guide but i managed to find the files and installed. but it overclocked to 1.1ghz, not 1.3. I don't really mind, but just wondering what I did wrong.. I'm thinking of trying it again but using the latest phiremod 7.1. I used the old 6.1 yesterday instead because I wasn't very sure.
So, now my question would be do I have to revert it back to cm7 then overclock it again? or can I just do it over what I've already done? or must I start from scratch, unroot, root to cm7 then overclock?
Click to expand...
Click to collapse
You can just install it as an update using ROM Manager and not lose any data. Just make sure the only boxes checked when you update are wipe dalvik cache and backup.
Sent from space
koopakid08 said:
You can just install it as an update using ROM Manager and not lose any data. Just make sure the only boxes checked when you update are wipe dalvik cache and backup.
Sent from space
Click to expand...
Click to collapse
I was about to update it, but now, my google account keeps saying my password is wrong, and I can't sign in. What can I do now? I tried updating the rom from rom manager but it says there's no updates available.
if I were to do it through recovery, I need to burn the clockwork on the sd, put the files in, and just install zip? or do i need to format system and data first?
messengerback said:
I was about to update it, but now, my google account keeps saying my password is wrong, and I can't sign in. What can I do now? I tried updating the rom from rom manager but it says there's no updates available.
if I were to do it through recovery, I need to burn the clockwork on the sd, put the files in, and just install zip? or do i need to format system and data first?
Click to expand...
Click to collapse
Go to download a rom to choose the rom you want.
You should install clockwork to your internal memory using rom manager and then you won't have to fool around with SD cards. If you want to update manualy through recovery then you need to wipe dalvik cache and then use the install a zip option. To boot into recovery hold volume up on boot.
Sent from my NookColor using Tapatalk
koopakid08 said:
Go to download a rom to choose the rom you want.
You should install clockwork to your internal memory using rom manager and then you won't have to fool around with SD cards. If you want to update manualy through recovery then you need to wipe dalvik cache and then use the install a zip option. To boot into recovery hold volume up on boot.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
I went - Rom manager - Download ROM - Error occured while processing the ROM list/Error occured while Developing Download list
How do I continue? ):
If I do update it manually through recovery, I need to install the phiremod v7.1, do I need to install gapps_phiremod_7.1 as well? the instructions are gone since phiredrop deleted his website. I can't find any other instructions for updating from 6.1 to 7.1
I still can't sign into my google account, keeps saying my password is incorrect. Any way to fix this?
"install clockwork to your internal memory using rom manager and then you won't have to fool around with SD cards."
so thats how it works. hahaha, that'll be great and less of a hassle for me. I've been repeating the burn clockwork, install, flash all sorts of roms too many times.
messengerback said:
I went - Rom manager - Download ROM - Error occured while processing the ROM list/Error occured while Developing Download list
How do I continue? ):
If I do update it manually through recovery, I need to install the phiremod v7.1, do I need to install gapps_phiremod_7.1 as well? the instructions are gone since phiredrop deleted his website. I can't find any other instructions for updating from 6.1 to 7.1
I still can't sign into my google account, keeps saying my password is incorrect. Any way to fix this?
"install clockwork to your internal memory using rom manager and then you won't have to fool around with SD cards."
so thats how it works. hahaha, that'll be great and less of a hassle for me. I've been repeating the burn clockwork, install, flash all sorts of roms too many times.
Click to expand...
Click to collapse
1. Try pressing menu- clear download cache and see if that changes anything.
2. Yes you should flash gapps again seeing how you are having problems with your google account.
3. I've never used phiremod so I am not sure if that is a problem. I would suggest that you go with just virgin CM7.1 but I'm sure phiremod will be fine too.
Sent from space
koopakid08 said:
1. Try pressing menu- clear download cache and see if that changes anything.
2. Yes you should flash gapps again seeing how you are having problems with your google account.
3. I've never used phiremod so I am not sure if that is a problem. I would suggest that you go with just virgin CM7.1 but I'm sure phiremod will be fine too.
Sent from space
Click to expand...
Click to collapse
cleared download cache, didn't work. ): how do I revert back to cm7?
I found out the problem to my google account. turns out, my account was freezed by gmail because of suspicious activities. so, I changed my password and it all works again. yay!
update: OH!! after I signed into the google account, I can go into download roms! double yay! I'm downloading it right now, will see if it works once done! question, would I still need to download gapps again?
Not if they are all working fine.
Sent from space
Okay, after all the trial and errors, my nook color is finally up and running awesomely on cm7,phiremod 7.1 at 1.2ghz.
Went to rom manager - download rom - phiremod - v7.1 - reboot after that, I had to do gapps again because some files like market wasn't in the menu, but on the homepage. rom manager - download rom - phiremod - gapps - reboot.
so everything is working well so far.
thanks to all the help I received, especially koopakid08!
If you want to easily overclock your nook to the Max, along with adjusting voltage to handle it and adjusting speaker gain and other stuff, look up Nook Tweaks (icon is a nook outline with gears inside). The process is very simple, just make sure you install it to the device not SD (I made that mistake), because otherwise it won't set the CPU speed and voltage settings on boot (even with the boxes checked). I am able to get my nook running smoothly at 1300MHz, but the option goes up to 1600. So wherever your nook's Max is can be found with this app. No need to readjust your kernel, just install the app and go. If you want to make sure that it is working on boot, download autostarts, which shows what starts during boot.
-XDA Premium on CM7 Nook Color
vessamj said:
If you want to easily overclock your nook to the Max, along with adjusting voltage to handle it and adjusting speaker gain and other stuff, look up Nook Tweaks (icon is a nook outline with gears inside). The process is very simple, just make sure you install it to the device not SD (I made that mistake), because otherwise it won't set the CPU speed and voltage settings on boot (even with the boxes checked). I am able to get my nook running smoothly at 1300MHz, but the option goes up to 1600. So wherever your nook's Max is can be found with this app. No need to readjust your kernel, just install the app and go. If you want to make sure that it is working on boot, download autostarts, which shows what starts during boot.
-XDA Premium on CM7 Nook Color
Click to expand...
Click to collapse
True but you will not gain any performance by going over 1.2, only worse battery life and the chance of overheating.
Sent from space
Well I certainly don't think I know any better than anyone else, its just that I recorded a pretty decent increase from 1.2 to 1.3 when I ran a benchmark using Quadrant Standard. That's the only basis I currently have, but I figured since Quadrant Standard got good reviews that it was creditable... do you know of a better benchmark?
-XDA Premium on CM7 Nook Color
vessamj said:
If you want to easily overclock your nook to the Max, along with adjusting voltage to handle it and adjusting speaker gain and other stuff, look up Nook Tweaks (icon is a nook outline with gears inside). The process is very simple, just make sure you install it to the device not SD (I made that mistake), because otherwise it won't set the CPU speed and voltage settings on boot (even with the boxes checked). I am able to get my nook running smoothly at 1300MHz, but the option goes up to 1600. So wherever your nook's Max is can be found with this app. No need to readjust your kernel, just install the app and go. If you want to make sure that it is working on boot, download autostarts, which shows what starts during boot.
-XDA Premium on CM7 Nook Color
Click to expand...
Click to collapse
Oh, sounds great but I think I'll keep it at 1.3 rather than 1.6, I don't want it to overheat it or something. I've already downloaded the app and tried to change it to 1.3, but what is the CPU stepping 1,2,3,4,5? I changed it to 800, 900, 1000, 1200 and 1300. Is that okay?

Talk About MIUI ICS Setup, Fixes, Bugs and Cross Problem Solving With All ICS ROMS

Wanna thank Evol4G for the idea of starting a thread to focus on future development of MIUI ICS and how it can carry over to other ICS ROMS.
This is an add-on thread to talk about Specifically MIUI ICS and the different parts of the ROM that need specific attention.
This is NOT the place to ask about HWA, WIMAX, lagginess or anything that is probably attributed to user error or lack of reading/searching skills.
GUIDE TO RUNNING A BUG FREE MIUIv4
This guide goes over all the steps you'll need to get as close as we can for a bug free MIUI, A lot of bugs people get can be avoided if the steps are done propperly that is why this thread is so important..
THE GOAL HERE IS TO GET EVERYONES EVO RUNNING SMOOTH!
IF YOU FEEL THAT YOUR METHOD IS BETTER PLEASE POST IT! The whole point here is trial and error to see how we can get these ROMS to run as smooth as possible and to expose the less than obvious bugs to help the devs pin point the issues..
I have followed all of the ICS Threads on XDA pretty carefully and I have made a career out of determining the very best way to go about setting up a new ROM on a phone.
I know that ALL of the Devs working on ICS Roms are fantastic in what they do and should be commended for what they have accomplished, but in MY opinion, Swiper/Fergie's MIUI v2.4.6 is the closest to a complete ROM out of any of them, but it's not as easy as a quick wipe and a flash to get it up and running.
This is how I flashed this ROM, from step 1 to finish and probably why i have a fast, responsive, almost bug free ICS ROM that is easily my daily. I'll never go back to Gingerbread.
A lot of this is the same as what I have in my All Things Evo Guide
The first thing I do is prep the ROM itself. I remove all the ringtones, alarms and notifications from the Zip file. I keep those on my SD Card already, so I don't need them in there. I also have Astro File Manager on my Phone and I use that to back up all my apps, occasionally. I take the apps that I know I'll need right away from the backup folder for Astro and add them to the zip.
Specifically, Titanium backup, Maps, GPS Status, Connectbot, and now, the new VVM for ICS, which DOES work!
http://forum.xda-developers.com/show....php?t=1547780
Step 1. This is a MIUI ROM, which means GPS could be an issue, so the first thing I do is make a nandroid of my current Setup, then I restore my stock/rooted ROM.
Step 2. I update Profle and PRL, then I do the Sense GPS Fix.
You must be in a Sense ROM for this
Open Maps; get a lock on your position.
Open GPS Status & Tool Box, get a lock on your Sats and then hit Menu>Tools>Manage A-GPS State>Reset.
Open Dialer and dial ##GPSCLRX#
In the popup that asks for your password, enter your MSL, (You'll need MSL Reader from the market) then reboot.
When the phone is rebooted, Open Maps, get a lock; Open GPS Status, hit Menu>Tools>Manage A-GPS State>Download. Once you are locked onto your Sats, power down, then Reboot to Recovery.
Of course, I only use Amon Ra and in Recovery, I wipe everything, completely; Factory Reset., then each option underneat that, except SD Card:
Then I run Factory Reset again, then Cache and Dalvik Cache and Data again, jsut to make sure it's all clear.
Go to Flash, and Flash the Rom. Once it's done, go right back to flash and flash DT A2SD, the nI boot to System and once booted, I let it sit for a good 10 minutes, so everythign get's booted up and settled in.
At this point, I open LBE manager (Superuser) and set all my permissions to on and accept all.
I open Maps, get a lock, open GPS Status, and I already know I'll get a lock on my sats. Then I hit menu and update GPS Data.
Next is Connectbot, and I move my Dalvik Cache to my SD Card. Here's the commands
su
a2sd check
a2sd cachesd
The phone will reboot and again, I just let it sit for about 10 minutes.
Once I wake it up, I set my preferences, display, sounds, accounts, etc. MIUI ICS hasd a TON of new settings and one is the Status Bar Options. Hit Customize Statas Bar Notification and make sure Hide Notification is turned off. This will allow notifications to show up.
Once I'm done, I reboot to recovery, wipe Cache and Dalvik and Flash my Kernel.
The BEST kernel to use right now is Mason v0.14 SBC No FSO. I also Flash Vipermod.
That's it. If you use a different kernel and you have problems, this is the first place to look.
Upon reboot, I let the phone settle, then I open Titanium backup and restore my apps/Data. Now, I have had a lot of problems in the past with TB Freezing up when U try to restore all 117 apps I have in one session, so I do it in 3 now. I alphabetize the apps and then go A-H, I-P, Q-Z
Once finished, I open Rom Toolbox and go to Autostart Manager and make sure all the apps I DON'T need to be runnign at boot are toggled off. Then I set Car O Dope Tweaks. I'm one of the believers that Car O Dope is for AOSP, V6 is for Sense. I have yet to give Smurfs tweaks a run, but I plan to, soon.
I reboot and run Vipermod -50 in Connectbot, and then setup my desktop folders, etc. Then I g othrough any apps I need to set preferences for, Make sure VVM is working and that is basically it. Took some extra time, but I shake my head at the problems people are having that are almost alwasy attributed to shortcutting the process.
Almost all of the links and files anyone needs are on the guide in my signature
Bugs & Fixes.
• USB Connect - The two ways to fix this are with the app, USB Mass Storage in the market or the FTP Function is File Explorer.
• Camera only takes 3MP pics - D/L Camera ICS from the market and you'll get up to 8MP
• Theme Manager - There are very few themes for MIUI ICS. I understand that a new Theme Manager should be coming soon, according to the rumors.
• Music Player/Theme Sounds not seeing music folder - D/L Rescan Media form the market. Problem solved.
• Slow 3G/Data Speeds and Market Downloads. For me, after about a day, this fixed itself
Known Issues
No WIMAX
No HWA, yet
No Front Facing Camera
No Video Recorder
I know these are a lot of steps but if you can follow them I promise your phone will see massive improvement.. it's worth it, trust me
First of all, You'll see that my steps are close to hipkats that's because i learned a bit of this from him but I do a few things different, one of the main things is that I don't use the SENSE GPS fix, gpsfix from the play store works great for me and saves me the headache of the sense fix..
Secondly, I'm running swiperrat's MIUI 2.4.6, if you haven't tried it yet I suggest you do, it's the most stable yet IMO..
(*) asterick means that this step is highly recommended but not necessary
1) View thread to download Swiperrat's MIUI v4 HERE
* Download Dark Tremor's Apps2SD HERE
* Download viperMOD HERE
* Add 3rd party apks to the zip before flashing, this step isn't necessary but it does save you some time..(I added Titanium Backup,Terminal Emulator, GPSFIX, Srpint VVM for ICS)
2) Reboot into recovery (Amon Ra IS HIGHLY RECOMMENDED!!!!!!GET IT HERE!!!!!)
3) Wipe user data/factory reset, cache, dalvik cache, data, and boot (I do factory reset, cache, and dalvik 3x)
4) Flash ROM (DO NOT FLASH CUSTOM KERNEL YET!!!)
* Flash DTA2SD
5) Boot up phone and let it set for about 10 minutes
* I recommend waiting until the sd has fully completed its read before unlocking the phone
6) Run GPSFIX
* If you have DTA2SD I strongly recommend moving cache to sd as well, I garuntee you will absolutely love how much free space you'll have on your internal storage
TO MOVE CACHE TO SD open up terminal emulator and type in all lowercase
"su"
"a2sd check"
"a2sd cachesd"
7) Reboot into recovery, wipe cache and dalvik and flash custom kernel, I use MASON Kernel the one in my signature, and let sit for another ten (hipkats recommendation)
* Set up tweaks, I use Car-o-Dope which you can find HERE
8) Restore backup via TB or MIUI BACKUP
9) Use any kind of startup manager you have and disable all the apps you don't need to start up at boot.. (this helps reduce the time the phone takes to boot and stops stupid apps from running in the background behind your back) THANKS HIPKAT, idk why i was forgetting to do this, I used to all the time but the past 5 or 6 flashes I forgot lol
10) FIX PERMISSIONS (I hate ROM manager and don't even have it installed on my phone so this is how i do it)
- Open Terminal Emulator type in all lowercase "a2sd check" then "a2sd fixapk"
11) Reboot into recovery (only if you want vipermod, if not then just reboot)
* Flash Vipermod and reboot, then open terminal emulator again and type "vipermod" then set it to your liking (i set at -50mv)
12) Download MX player from the play store once installed go to settings and make sure s/w is checked and h/w is unchecked (THIS FIXES THE CHOPPY VIDEO!)
13) THE MOST IMPORTANT. IF YOU DON'T DO THIS YOU'VE WASTED SO MUCH TIME AND EFFORT!.. enjoy
Reserved
Thanks for sharing your knowledge. Just realized the recent version of dta2sd wasn't on my sd after reading your post.
Sent from my PC36100 using xda premium
thanosart said:
Thanks for sharing your knowledge. Just realized the recent version of dta2sd wasn't on my sd after reading your post.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
I'm using an old version of dta2sd, it still works perfect but to be honest it's only because I've been to lazy to update... I guess I'll get on that tonight
sent from my kick ass evo using xda premium
I have the same version I've had for quite some time. Is there a newer version?
HipKat said:
I have the same version I've had for quite some time. Is there a newer version?
Click to expand...
Click to collapse
ya, hyperlink is in my post ;] tbh i'm reconsidering upgrading... I know the version i have works and have yet to have a problem with it so i don't really see the point in updating... anyways this thread needs some love... I would say move it to MIUIandroid but tbh this thread isn't supposed to be solely about MIUI in the long run it's supposed to help ALL ics roms but i don't think people understand that yet...
Native Messaging works for sending/receiving MMS in MIUI ICS by Swiper/Fergie so al lwe're waiting for is FFC, Video Recorder, HWA.. a few other things.
Since MIUI is based on CM, shouldn't this be able to be reversed to bring CM9 to the Evo?

Categories

Resources