Database Users

Total Rotation... (hack/app request)

Any devs out there wanna give this a go?
I would love to be able to rotate my phone in any direction and have the screen flip like on my omnia... I know sense doesn't flip to landscape, thats not a prob, what I really want is to be able to flip the phone upside down and still use it as the correct rotation.
Reason I want to be able to do this is so I can use my phone in the cup holder of my car again, and to do this it must be upside down because of the charger placement... (same as on my Omnia)
Seems a pretty simple request, would be nice if it could auto run and run in the background without using up to much resources to.
If anyone is able to do this, would be awesome.
Thanks

Seconded ... but
I too would like to be able to rotate at least the other way; when showing off the Incredible, people rotate to landscape the other way and nothing happens, so they figure it doesn't rotate. I have to say "no turn it the other way" but it would be great to just not have to think about it.
BUT ... regarding the OP ... I simply took a dremel to the dash mount I bought (the beanbag, since California law doesn't allow sticking to the window in the middle). Carved out enough for a charger, and am done with it

I'd also like to see this. Anyone know the reasoning behind only allowing landscape mode by rotating to the left, and not the right? Even my old BB storm could handle rotation in both directions.

Agreed. This would be useful.

mattwood2000 said:
I'd also like to see this. Anyone know the reasoning behind only allowing landscape mode by rotating to the left, and not the right? Even my old BB storm could handle rotation in both directions.
Click to expand...
Click to collapse
I would think it's because the majority of the world is right-handed and by rotating to the left, the optical track button is on the right side. I could complain because I'm left-handed, but hey at least my phone still has a signal when I hold it in my left hand, unlike other phones out there

This is an option in the cyanogen rom available in the rom manager. If you can look past the few bugs in the rom you can enjoy the 360 degree rotation you are looking for.

br125 said:
This is an option in the cyanogen rom available in the rom manager. If you can look past the few bugs in the rom you can enjoy the 360 degree rotation you are looking for.
Click to expand...
Click to collapse
I've been running this cyanogen ROM since it came out and this is the 2nd thing you have pointed out to me in the settings that i didn't know about. I need to look through all the settings much more thoroughly.

br125 said:
This is an option in the cyanogen rom available in the rom manager. If you can look past the few bugs in the rom you can enjoy the 360 degree rotation you are looking for.
Click to expand...
Click to collapse
My phone aint even rooted yet, for some reason I've tried everything and won't allow me to get into adb recovery... anyways, if it's in another rom, it must be possible, if someone could make this an app!! it would be awesome.
Then we wouldn't have limits as to which rom we would have to use.
...just a thought...

JustinD2473 said:
I've been running this cyanogen ROM since it came out and this is the 2nd thing you have pointed out to me in the settings that i didn't know about. I need to look through all the settings much more thoroughly.
Click to expand...
Click to collapse
Yeah you should hes got a lot of good stuff.

So will this be possible as an App?

forgot to reopen

Thanks Mikey for re-opening this thread , you can delete the Why thread now if you like...
So anyone know if any of this is possible?

[TWEAK] Status Bar Tweak for Game Compatibility

This was made for CM7 A3.5, not sure if it'll work right on other builds.
What this does specifically:
1) It makes the status bar 168 in height.
2) It adds 133 padding to the top of the status bar to align the status bar contents back to the bottom.
What it achieves:
1) 16:9 App Space, if a game was designed to compensate via stretch, scale, etc..., for the status bar. A lot of games do.
2) It makes quite a number of games made specifically for 16:9 tablets have better or functional touch UI's so you can actually play them. Dungen Hunter 2 for example will require this. Majesty: Fantasy Kingdom works better with this. Exitium: Saviors of Vardonia needs this to have a fully functional UI in all menu's etc...
Downside:
1) You will have a huge chunk of black space on your status bar. Maybe someone more bord can go elaborate and write a toggle button for this or something. I'm not there yet. Lmao. & I've gotten used to it, so it's not that ugly anymore. I rather have functionality over pretty until ICS comes out.
Instructions:
Back up your
/system/framework/framework.apk
/system/app/SystemUI.apk
copy provided framework.apk to /system
copy provided SystemUI.apk to /system
change permissions of provided framework.apk to RW-R--R--
change permissions of provided SystemUI.apk to RW-R--R--
move provided framework.apk to /system/framework and overwrite
move provided SystemUI.apk to /system/app and overwrite
dungeon hunter 2 and exitium are the best example of what this tweak makes work.
for dungeon hunter 2: the graphics and touch control graphics are aligned to the bottom of the screen while their respective touch location on the screen is aligned to the top. the offset between touch location and graphic makes the game unplayable.
for exitium: the menus and stuff overlaps, you can't even access your cash account online to grab your free coins for buying the game. a lot of menus are overlapped, armor screens are overlapped, etc... because the aspect ratio the GUI was designed for is 16:9.
Game List that this tweak helps on (more 2 come):
Dungeon Hunter 2 Samsung GP1000 version + must have ChainFire3D and Reduce Texture to 16bit.
Exitium: Saviors of Vardonia
Asphalt 5 Samsung GP1000 version

could you post a screenshot?

I'm assuming this wouldn't work on the MIUI ROM.
But you did answer my question about why I couldn't get Dungeon Hunter 2 or Sacred Odyssey working.

rogabean said:
I'm assuming this wouldn't work on the MIUI ROM.
But you did answer my question about why I couldn't get Dungeon Hunter 2 or Sacred Odyssey working.
Click to expand...
Click to collapse
well, you need ChainFire3D to get some of the gameloft games working.
toggle 16bit textures on. & try the Nvidia and THD plugins.
this is in addition to ChainFire3D. like Dungeon Hunter 2 was unplayable even when working due to the touch positions being displaced from the visual UI. this helps the put the visual UI @ their touch positions.
also, after you purchase the game from gameloft, you'll have to search the net for the Samsung Galaxy P1000 Tablet apk of the game. there's a thread at rootzwiki on game compatibility that gives a lot of info on how to get some of these games working.
http://rootzwiki.com/topic/7709-gameloft-compatibility-thread-with-working-version-s/

Can you test to see if this will allow the game "We Rule" to work? Thank you.

madflava54 said:
Can you test to see if this will allow the game "We Rule" to work? Thank you.
Click to expand...
Click to collapse
well you guys should really post what's wrong with it when you play it if you're gonna ask questions like this. lol. tested, it seems to be working fine.

Ok so when I play asphalt 6 it looks like the borders are cut off. I cant see the whole car or other things around the border. Is this what this will fix? Sry for the newbism.

qwerty007 said:
well you guys should really post what's wrong with it when you play it if you're gonna ask questions like this. lol. tested, it seems to be working fine.
Click to expand...
Click to collapse
Sorry. The game loads and you can log in if you actually signed up and the screen is just black and you can hear music. I also went into settings and disabled the status bar when an app wants full screen and this did not fix the game from staying just black and having music.

madflava54 said:
Sorry. The game loads and you can log in if you actually signed up and the screen is just black and you can hear music. I also went into settings and disabled the status bar when an app wants full screen and this did not fix the game from staying just black and having music.
Click to expand...
Click to collapse
hmm. im not having this problem. using CM stock A3.5. with ChainFire3D installed but default options only. the initial log in, i had to press hide status bar. then worked fine after that.

Sychodrama said:
Ok so when I play asphalt 6 it looks like the borders are cut off. I cant see the whole car or other things around the border. Is this what this will fix? Sry for the newbism.
Click to expand...
Click to collapse
i'll check it out tonight, but first thought is that you probably need the Samsung Galaxy P1000 tablet version of it.

qwerty007 said:
i'll check it out tonight, but first thought is that you probably need the Samsung Galaxy P1000 tablet version of it.
Click to expand...
Click to collapse
OK so I know this is a seperate prob than what you are working on but I would greatly appreciate it if you could tell me were to get the tablet version. I will try that.

I open asphalt 6 and it says incompatible device request refund
Sent from my PC36100 using xda premium

qwerty007 said:
hmm. im not having this problem. using CM stock A3.5. with ChainFire3D installed but default options only. the initial log in, i had to press hide status bar. then worked fine after that.
Click to expand...
Click to collapse
Interesting. Maybe I will clean install or something. I tried using chainfire but I am not sure if I am installing the plugins properly. Nothing seems to happen when I try to enable a plugin. Do I need pro?
And you can see your "kingdom"? I'm shocked that the game is working for you.

madflava54 said:
Interesting. Maybe I will clean install or something. I tried using chainfire but I am not sure if I am installing the plugins properly. Nothing seems to happen when I try to enable a plugin. Do I need pro?
And you can see your "kingdom"? I'm shocked that the game is working for you.
Click to expand...
Click to collapse
yeah, works perfectly fine as far as i can tell. i planted crap and got to level 5 so far, working fine. menu's fine on the patched up systemui and framework-res.

qwerty007 said:
yeah, works perfectly fine as far as i can tell. i planted crap and got to level 5 so far, working fine. menu's fine on the patched up systemui and framework-res.
Click to expand...
Click to collapse
Whoa, I tried reinstalling without doing anything different and I am stuck on a "Loading" screen. I've been on it for about 10 minutes. About how long did it take you to get past this screen?
Yeah, the game is stuck on the Loading screen. It should be saying "Downloading content" or something like that. Bummer. Not sure what is going on.
I even uninstalled xron and installed CM 7 3.5 and I am stuck on the "loading" screen.

Screenshot?

It's stuck here.

madflava54 said:
It's stuck here.
Click to expand...
Click to collapse
ok, googled the issue, and read complaints about not being able to connect & apparently the game makers of this game are retarded; this game has an issue, not device specific, where people can't connect to the content servers. & are SOL because the game developer is completely ignoring the issue. some people complained about un-install, then re-install, and bricked the game. so I tried that, and bam! stuck at loading screen like you. lmao! i guess try to make a new account and see if that'll let you in. the first time i tried it was with a new acct. obviously it's a server or major development problem if you can get in with new accounts but can't get in with an already active one.
add: no luck with new account either. maybe it's just random luck to get into the content download server? lmao. sry, i didn't think ahead and titanium back my app data for you & me before i un-installed and re-installed. lol. i guess if someone out there could provide titanium back up data on this apps external data we could just restore that and avoid having to connect to download it.

Crsdr37 said:
I open asphalt 6 and it says incompatible device request refund
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
I get this on Backstab too and don't know how to resolve the issue. Also have a problem with Bejeweled 2, it won't even start to download the 40MB of extra data that is needed just sits there are 0%. Actually the 0% changes to NaN!!

dtwconsulting said:
I get this on Backstab too and don't know how to resolve the issue. Also have a problem with Bejeweled 2, it won't even start to download the 40MB of extra data that is needed just sits there are 0%. Actually the 0% changes to NaN!!
Click to expand...
Click to collapse
you guys should check this thread first.
http://rootzwiki.com/topic/7709-gameloft-compatibility-thread-with-working-version-s/

Performance issues? There's a fix for that!

A few of you have been asking for a howto guide on improving the performance on your devices, and I have listened!
I have made for you all a video guide on how to get your 7.7 flying!
Enjoy!
Galaxy Tab 7.7 Speed Tweaks ADW EX [ROOT]

Thanks, some nice stuff in there, even if a lot of it is really a ADW.EX tutorial.
Just fyi, you have a typo in the video description--you say ADX EX launcher.
About Customize Menu--you can reorder (or remove theoretically, but this was buggy for me) the items that appear on the top bar and in the drop-down when you push the menu button. I use this so that I can have Add in the menu, because I keep the top bar hidden and there is no other easy access to add/remove/move home screen pages.

teiglin said:
Thanks, some nice stuff in there, even if a lot of it is really a ADW.EX tutorial.
Just fyi, you have a typo in the video description--you say ADX EX launcher.
Click to expand...
Click to collapse
Not bad for a single take and no editing though lol!

how did you set up you dolphin for tab browser to have the 4d scrolling between tabs

adinis78 said:
how did you set up you dolphin for tab browser to have the 4d scrolling between tabs
Click to expand...
Click to collapse
It's a native function of the Dolphin for Pad Beta v1.0

Jade Eyed Wolf said:
It's a native function of the Dolphin for Pad Beta v1.0
Click to expand...
Click to collapse
hmmm can seem to get mine to due it
EDIT: got it i saw the video again, i wasnt using the two finger tap

adinis78 said:
hmmm can seem to get mine to due it
Click to expand...
Click to collapse
Two finger tap on the edge of the web page?

Jade Eyed Wolf said:
Two finger tap on the edge of the web page?
Click to expand...
Click to collapse
Yep
Sent from my SGH-T959 using XDA App

Thanks for the hardwork on this tutorial on what your settings are and also I've seen a better view of your screen which apparently confirms my findings from your other video.
EDIT:
The ro.HOME_APP_ADJ=0 tweak really does wonders!

Thanks alot J.W. very nice job! & thanks for stepping up when all of us asked you to!!!!

EarlZ said:
Thanks for the hardwork on this tutorial on what your settings are and also I've seen a better view of your screen which apparently confirms my findings from your other video.
EDIT:
The ro.HOME_APP_ADJ=0 tweak really does wonders!
Click to expand...
Click to collapse
I have to try this when I get home, the homescreen redraw drives me nuts, and its completely unecessary imo!
EDIT - OMGGGGGGGGG finally, the tablet has no effing homescreen redraw lag, thank you Jade Eyed Wolf!

Oh, oh. Just did this and now the tablet won't start!!!! I just get the initial "galaxy tablet 7.7" screen and then it stays black....
Any ideas? The only thing I changed was this
"Add this line to "/system/build.prop":
ro.HOME_APP_ADJ=0"
Help!!!!!
can someone post a copy of their build.prop (6810)? Would that help?
I can get into recovery, but rebooting form there doesn't do anything.....

Anyone with any bright ideas?
I can get into recovery, but I can't connect to the device via the pc to get at the files. well, that isn't quite true, I can see them if I use a pgr called DROIDEXPLORER, I can copy from the device to the PC but not back the other way. So I tried to edit the build.prop locally and push it back (using droidexplorer) but the one on the device just stays the same with the edit above in it...
I'm now considering flashing a new FW as the only way to get the tab going again.
Any help?

followed instructions and still couldn't write to sd card with ES File Explorer. Can't tell with homepage redraw... What's bad is that this killed my internet connection. After rebooting, the status bar shows me connected to either my home wifi or my H+ service provider but I can't access the internet nor my local network... Restarting the 7.7, deleting the relevant lines, restarting my router/cable modem (still have internet on my main comp and ipad) all didn't help.
I guess I have to reflash my 7.7.

OK, so after a sleepless night (the little one was on full song) I reflashed my Tab this morning and way hey! It is back in the land of the living.
Pheww.
Jade, I think the hack to keep the homescreen in memory might need to be revisited? I followed the instructions to the letter. After applying the hack the device just would not come to life. It wasn't a case of screen-off, device on either. I plugged it in to a PC and there was nothing. The only way I could get the PC to see it was to start it in recovery.
Maybe it is just a combination of things on my machine and I guess these things can just happen, but I think it might be worth checking?
I'm totally happy with flashing now though

Just thought this could use a bump since it was so helpful to me.

daigled said:
Just thought this could use a bump since it was so helpful to me.
Click to expand...
Click to collapse
Thanks!

palexr said:
OK, so after a sleepless night (the little one was on full song) I reflashed my Tab this morning and way hey! It is back in the land of the living.
Pheww.
Jade, I think the hack to keep the homescreen in memory might need to be revisited? I followed the instructions to the letter. After applying the hack the device just would not come to life. It wasn't a case of screen-off, device on either. I plugged it in to a PC and there was nothing. The only way I could get the PC to see it was to start it in recovery.
Maybe it is just a combination of things on my machine and I guess these things can just happen, but I think it might be worth checking?
I'm totally happy with flashing now though
Click to expand...
Click to collapse
It worked for me (Galaxy Tab 7.7 wifi) so you probably entered something wrong... Actually I realised that after entering "ro." the keyboard inserted a space after the dot, so it looked like this: ro. HOME_APP_ADJ=0 and it is like this: ro.HOME_APP_ADJ=0 see the difference?
I realised right away and fixed it. If I were you I would try it again....
It works for me alright, I don't know if at the end uses too much ram and slows down other things, if it does I'll just delete that line and that's it....
Thanks to Jade W. good idea...

Dusko75 said:
It worked for me (Galaxy Tab 7.7 wifi) so you probably entered something wrong... Actually I realised that after entering "ro." the keyboard inserted a space after the dot, so it looked like this: ro. HOME_APP_ADJ=0 and it is like this: ro.HOME_APP_ADJ=0 see the difference?
I realised right away and fixed it. If I were you I would try it again....
It works for me alright, I don't know if at the end uses too much ram and slows down other things, if it does I'll just delete that line and that's it....
Thanks to Jade W. good idea...
Click to expand...
Click to collapse
Nope, just tried it again, result dead tablet... My tablet definitely does not like this line in build.prop
So, I would advise caution with this line. Take a backup before trying it or get comfortable with reflashing.

palexr said:
Nope, just tried it again, result dead tablet... My tablet definitely does not like this line in build.prop
So, I would advise caution with this line. Take a backup before trying it or get comfortable with reflashing.
Click to expand...
Click to collapse
HAs anyone got any bright ideas about pushing the original build.prop file back? ADB push just gives me "failed to copy 'build.prop' to '/system/build.prop': Read Only File
I'd rather just get the correct one in there than re-flash...

[Q] Some titles garbled using Nook Manager

I used Nook Manager to root my Nook Glowlight V1 early this year. I love it, but I've been having a small problem that I haven't been able to figure out.
Most of my titles show up fine (using ReLaunch), but a few are garbled. . . most of the garbled ones display as "%t" (photo demonstrating this available via email if it's needed. . . I'm too new to post a link to the photo ).
But a few will show the author and then "%t", a few show "Unknown", and a few seem like just strings of characters.
I tried changing the text of the file names themselves. That doesn't seem to have any effect. I've looked at the metadata in Calibre, but I don't see anything that looks amiss. Frankly, I'm stuck, and that's why I need to ask this question! Could anyone point me toward a possible cause (or, even better. . . a solution)?
Thank you!

Maneki Necco said:
I used Nook Manager to root my Nook Glowlight V1 early this year. I love it, but I've been having a small problem that I haven't been able to figure out.
Most of my titles show up fine, but a few are garbled. . . most of the garbled ones display as "%t" (photo demonstrating this available via email if it's needed. . . I'm too new to post a link to the photo ).
But a few will show the author and then "%t", a few show "Unknown", and a few seem like just strings of characters.
I tried changing the text of the file names themselves. That doesn't seem to have any effect. I've looked at the metadata in Calibre, but I don't see anything that looks amiss. Frankly, I'm stuck, and that's why I need to ask this question! Could anyone point me toward a possible cause (or, even better. . . a solution)?
Thank you!
Click to expand...
Click to collapse
Hi Maneki!
I'd love to help, but I need a few more specifics.
1. Is your Nook Touch Glow on firmware 1.1.5, 1.2.0 or 1.2.1?
2. Are the problematic books signed with Adobe DRM?
3. How long have you been having this problem?
Later,
3N

thenookieforlife3 said:
Hi Maneki!
I'd love to help, but I need a few more specifics.
1. Is your Nook Touch Glow on firmware 1.1.5, 1.2.0 or 1.2.1?
2. Are the problematic books signed with Adobe DRM?
3. How long have you been having this problem?
Later,
3N
Click to expand...
Click to collapse
Of course!
1. It's on 1.2.1
2. No, they're not.
3. Since I first rooted, so since February. I thought I'd eventually find a thread here or elsewhere so I could fix the problem myself, but I suspect that I just don't know what I'm looking for.
Thanks!

Maneki Necco said:
Of course!
1. It's on 1.2.1
2. No, they're not.
3. Since I first rooted, so since February. I thought I'd eventually find a thread here or elsewhere so I could fix the problem myself, but I suspect that I just don't know what I'm looking for.
Thanks!
Click to expand...
Click to collapse
Great, thanks for the info.
Have you already tried completely removing the offensive books from your Nook, rebooting, and then adding them back? If not, try that.

thenookieforlife3 said:
Great, thanks for the info.
Have you already tried completely removing the offensive books from your Nook, rebooting, and then adding them back? If not, try that.
Click to expand...
Click to collapse
I did at one point, but I tried again, just to make sure. Sadly, no luck!

Maneki Necco said:
I did at one point, but I tried again, just to make sure. Sadly, no luck!
Click to expand...
Click to collapse
I kind of thought you would've.
Okay, now, would you PM me a quick pic (or, better yet, a screenshot) of the screen with the problematic books on it? (I.e, the Library screen)

thenookieforlife3 said:
I kind of thought you would've.
Okay, now, would you PM me a quick pic (or, better yet, a screenshot) of the screen with the problematic books on it? (I.e, the Library screen)
Click to expand...
Click to collapse
Sure thing.

Reply to your PM
Then I believe this solves your problem AND provides a cause.
In the Advanced Settings menu of ReLaunch, there are several file association settings. Look around in there and see if anything works.
I actually got rid of ReLaunch quite a while back, and am currently using ADW with the Minimalist theme. I absolutely love it. But, if you need me to look around in ReLaunch, please post the .apk for me and I'll temporarily reinstall it.

thenookieforlife3 said:
Thanks. See my reply PM for instructions, then post results here.
Click to expand...
Click to collapse
I tested the stock Library, and the titles do show up there.
An important element of the problem, which thenookieforlife3 kindly diagnosed and I neglected to mention, is that I'm using ReLaunch! So the problem is specifically that they're not displaying correctly in ReLaunch, not that they won't display correctly at all.

Maneki Necco said:
I tested the stock Library, and the titles do show up there.
An important element of the problem, which thenookieforlife3 kindly diagnosed and I neglected to mention, is that I'm using ReLaunch! So the problem is specifically that they're not displaying correctly in ReLaunch, not that they won't display correctly at all.
Click to expand...
Click to collapse
:laugh:
See the above post.

thenookieforlife3 said:
:laugh:
See the above post.
Click to expand...
Click to collapse
I must have messed something up while playing with settings when I first rooted (honestly, as is probably obvious from this thread, the level of versatility is kind of over my head!). . . I poked at a few things, and then I just restored the ReLaunch settings to default, and the titles show up again.
Thank you so much; that was massively helpful!

Maneki Necco said:
I must have messed something up while playing with settings when I first rooted (honestly, as is probably obvious from this thread, the level of versatility is kind of over my head!). . . I poked at a few things, and then I just restored the ReLaunch settings to default, and the titles show up again.
Thank you so much; that was massively helpful!
Click to expand...
Click to collapse
Hooray! Glad to have helped!
Can I get a few post thanks for the assistance?
Feel free not to.

thenookieforlife3 said:
Hooray! Glad to have helped!
Can I get a few post thanks for the assistance?
Feel free not to.
Click to expand...
Click to collapse
Oh, absolutely!

Maneki Necco said:
Oh, absolutely!
Click to expand...
Click to collapse
Thanks.
Well, have fun with your Nook. By the way, if you have any questions about your NTG, please PM me, as I'd really love to help!
From USB host mode to partition resizing, I know my stuff!

thenookieforlife3 said:
Thanks.
Well, have fun with your Nook. By the way, if you have any questions about your NTG, please PM me, as I'd really love to help!
From USB host mode to partition resizing, I know my stuff!
Click to expand...
Click to collapse
Awesome; if I think of anything else, I'll do that!

Does this phone have miracast/screen mirroring?

Hey Guys,
I can't seem to find this information anywhere. My new car headunit support miracast screen mirroring and unfortunately google doesn't include support for it on my current Nexus 6P. If it's supported by the essential phone it pushes me closer to clicking buy.
Thanks!

Yes. You gotta turn it on under sounds > cast > menu

JCBomb said:
Yes. You gotta turn it on under sounds > cast > menu
Click to expand...
Click to collapse
Thanks that is fantastic news! Out of interest have you used it at all to display on another device and did it work well?

drc13 said:
Thanks that is fantastic news! Out of interest have you used it at all to display on another device and did it work well?
Click to expand...
Click to collapse
I haven't tried it. but when i turned on the settings three devices showed up. I'll give it a shot next time I'm around there again.

JCBomb said:
I haven't tried it. but when i turned on the settings three devices showed up. I'll give it a shot next time I'm around there again.
Click to expand...
Click to collapse
Awesome that would be great if you could report back. It's hard to find info on this kind of stuff so I appreciate your help with it!

drc13 said:
Awesome that would be great if you could report back. It's hard to find info on this kind of stuff so I appreciate your help with it!
Click to expand...
Click to collapse
Yup, it works with the sony bravia I tried out.
One thing I noticed on a quick test is the black bar in landscape mode shows up on screen even on full screen.

JCBomb said:
Yup, it works with the sony bravia I tried out.
One thing I noticed on a quick test is the black bar in landscape mode shows up on screen even on full screen.
Click to expand...
Click to collapse
Will be getting my phone soon. I do have a Sony TV, hope the phone will project to it.