Ok i decided i post what i did to recovery my sprints tab from a bad kernel flash that i didn't install clock work recovery, I thought my tab was a lost cause which i even chatted with hsn were i bought mine at for a replacement which would've took up to 30days.. So awhile i wait for that i decided to try and get it working till i get the prepaid label lol
Matter what i did it kept getting stuck at the samsung screen and couldn't get into recovery but download mode work luckly. i tried all kernels listed and it still got stuck which at the time i thought my tab was bricked or semi brick.
What i did is keep searching for the stock firmware which was hard to find but i found this thread http://forum.xda-developers.com/showthread.php?p=9753941#post9753941
Heres a direct link http://www.multiupload.com/WDKOUJSM2G
Thanks to ZoinksS2k for the tab sprint no modem firmware
And downloaded the stock no modem firmware the modem one is listed too but it will kill your gps and 3g might not work so i just did the no modem one.
So i downloaded it and odin was package with it and i couldn't get it to detect my tab in download mode ony when the tab was off it detected it..
So i tried heimdall and at first i couldn't get it to flash the start button was grayed out because i was putting the tar file into pda/code so i open the tar file and found factory.rfs param.ifs and cache.rfs and dbdata.rfs so i loaded all thoes in the heimfall boxes and than loaded the stock zimage which is in the tar too.
And than i flashed and saw the samsung screen and it went right pass it and played the samsung splash screen so i knew i was getting somewhere so it got stuck on the next samsung screen again.. So i turn it off and hold home button and volume up button than i push the power button and hold all 3 buttons till i saw the samsung screen and i left go the power button and the stock recovery loaded right up
So i did the wipe data/factory reset and i also did the wipe cache data just in case but im sure just the factory reset would work, And i restarted the tab and it went pass all screens and it loaded android!!! And everything was working 3g wifi gps and everything else.
So hopefully this guide will help others as a last resort if you ony get the samsung screen and download mode ony,If you get the receovery than just do the factory wipe.
This is worth a try first than sending it back to samsung and having to wait too get your tab back It sure saved me from having to send it back too hsn or samsung.
If you want you can thank me if this help you for providing the info
Gordesky,
Any idea how to go back to stock firmware + stock modem and all that from using the voodoo kernel? I have CWM Recovery 3.0 working.
Because, after going into Voodoo CWM Recovery, using wipe data/factory reset still keeps the kernel that I installed on - which is what makes my camera screwy.
If you want to go back to fully stock then follow his instructions and flash the stock kernel from the Zephyr thread. I actually am in the same boat as the OP and followed his instructions and now I'm fully back to stock.
Yep just do what I said which the tar file also have the stock kernel too.
Right now im on the voodoo kernel which works perfect except that cdrom problem but camera works for me so im gonna still with.this kernel so far. It seems the new sprint update doesint work right with the voodoo kernel problaby why I dont have any problems because I didint install the sprint update.
So when you go back too stock and want too give the voodoo another try dont install the sprint update when it asks you too, And everything should work other than the sdcard cdrom problems, Which I can deal with till it gets fixed because I do love the speed of this voodoo kernel
And the sound
Thank you gordesky1 for posting your experience because I was going through the exact same thing and I was at a loss as to how to resolve it. Unfortunately I did install the update but I'm pretty sure if I flash the same files again that I will go back to the original rom if that's necessary. The big problem with that is that the exchange fix in the update was something i was waiting for =\ so I think i'm going to wait and see if some of these issues are fixed in the next update but I wonder if we have to get Boushh a Sprint tab though =\ every day I curse myself for not getting a t-mobile or at least a Verizon tab *sigh*
No problem
Ya tell me about it... Bad thing for me is the sprint was my ony option which i got it because hsn were i bought it from had a flex pay on this tab which they ony have the sprint tab, and at the time i couldint pay 400 or 600$ right out. And i also got a 3years warranty on top of it from them even if i break it or drop it anywere which i pretty much got for free because they made a mistake at first with some software
The other tabs have cheaper 3g too like 5gb for 15 too 30$ a month.. But so far sprint is treating me good and the 3g has been stable so far and pretty fast loading webpages and can usely watch a youtube video but dont want too use up my monthy usage lol i usely use up too 500 too 600mbs max out of 2g and i useit every day and even download apps with it when im not near a wifi spot and listen too pandora too so i was suprized i didint get close too the 2gb limit yet.
Hopefully this thread will help more and save them from having too send it back too samsung or were they got it from, i know how it feels not having this tab which i use everyday at work.
I knew not to flash the modem from the restore package posted but when I tried to restore I used the .pit and the .tar. Failed at modem. So, being dumb I flashed the modem file. ugh.
Now I know all you need to do is flash the .tar, nothing else, no pit.
Your Post Saved Me!!!!!
10 characters
Your welcome and glad it helped I figure it was worth posting sense it brought my tab back too life which i thought i would've had too sent it back and waited a month or so, And wanted others too get there tab back too life with out playing the wait game which i really hate .. lol
this worked! I was able to get rid of CWM, my tab is 100% stock again! thanks a bunch!
well, I tried installing the update from sprint and goes back to CMW and starts doing the freaking back up again!! What the heck!!! anyone can tell me how to get back to stock recovery!! this is driving me nuts!
jcaf77 said:
this worked! I was able to get rid of CWM, my tab is 100% stock again! thanks a bunch!
Click to expand...
Click to collapse
I flash the above .tar and .pit with Odin and I still can't get rid of CWM. I had CWM 3.0 working. Then I flashed a Kernel (Khasmek) with kernel flasher and the damn thing froze on the splash screen. So I odin and it doesn't do a full factory reset. CWM folder is still there. Does anbody know how to completely revert back to stock firmware?
I basically want to start over from scratch and never use Kernel flasher.
Any help will be greatly appreciated.
lphillips80 said:
I flash the above .tar and .pit with Odin and I still can't get rid of CWM. I had CWM 3.0 working. Then I flashed a Kernel (Khasmek) with kernel flasher and the damn thing froze on the splash screen. So I odin and it doesn't do a full factory reset. CWM folder is still there. Does anbody know how to completely revert back to stock firmware?
I basically want to start over from scratch and never use Kernel flasher.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
Flash the zImage from the stock rom in the recovery slot using hiemdall and it will flash the stock recovery over cwm.
I performed that action and it works it does get rid of CWM but now I am still unable to install sprint updates they fail half way into it
jcaf77 said:
I performed that action and it works it does get rid of CWM but now I am still unable to install sprint updates they fail half way into it
Click to expand...
Click to collapse
I am having the exact same problem, really wish I had read your post before I attempted to get CWM on my sprint galaxy tab.
I believe the update failed for me due to mismatch baseband (EB28) and system build (DJ30), I am looking for a roto backup copy of system build EB28, if anyone have it, please help and upload!
Many thanks.
I flashed the zImage with heimdall and it still wont do a sprint system update and also I cannot do the cwm process again to format to ext4.
Sent from my SGH-T959V using XDA Premium App
lphillips80 said:
I flashed the zImage with heimdall and it still wont do a sprint system update and also I cannot do the cwm process again to format to ext4.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Check out the newly leaked EA24 flasher, it will update both system and baseband to EA24 and you will be able to update after that.
Thanks technote. I used the above and worked awesome!
Sent from my SPH-P100 using XDA Premium App
okay, im farily new to the galaxy tab forums, only reason im here is because my friend bricked his tab and figured i could take a stab at it, i mean im good at fixing my galaxy s so i figured, how hard can this be. Wrong, my head is killing me because i cant figure this out. His tab is stuck in a boot loop mean it goes to the "samsung" screen and then stays there forever. I tried using odin with the stock firmware with no modem, everything went good but when it attemped to restart still nothing ? can someone please school me on how to do this properly please. Im a pretty good listener if im given descent instructions lol please by all means HELP lol
Related
I was trying to flash a custom rom on my newly acquired Verizon Galaxy Tab and something went horribly wrong. I followed all of the guides from here and droidlife, but I keep getting stuck at the Verizon logo and the tab vibrates and never boots. Does anyone know where I can get Verizon tab pit file and complete recovery that includes boot.bin and modem? Any help would be VERY appreciated, I'm about to give up and ship it to Samsung for repair on Monday, but I really don't want to wait 5-7 business days to get it back
I have the same problem but on the Sprint model
Its really frustrating cuz the only reason I cant fix it because I cant find complete vz stock firmware anywhere.
Sent from my PC36100 using Tapatalk
Yay I finally fixed it by flashing, get this a stock SPRINT rom. Tab booted up just fine, but now 3G is stuck on Sprint(doesn't matter to me since I was just using wifi), GPS and everything works. I'm gonna flash Verizon firmware tomorrow.
alex2792 said:
Yay I finally fixed it by flashing, get this a stock SPRINT rom. Tab booted up just fine, but now 3G is stuck on Sprint(doesn't matter to me since I was just using wifi), GPS and everything works. I'm gonna flash Verizon firmware tomorrow.
Click to expand...
Click to collapse
Can you link me to a thread that has the firmware?
alex2792 said:
Yay I finally fixed it by flashing, get this a stock SPRINT rom. Tab booted up just fine, but now 3G is stuck on Sprint(doesn't matter to me since I was just using wifi), GPS and everything works. I'm gonna flash Verizon firmware tomorrow.
Click to expand...
Click to collapse
ya we went the link of the sprint rom
Here's a brief how-to that revived my Verizon Tab. These worked for me, but YMMV, I'm not responsible if you brick your Tab into a permanent paperweight mode.
Download stock Sprint firmware(the file doesn't have the modem.bin, but it still worked fine), get it here Tab Stock - No Modem.rar
Unzip the file then use Odin to flash the .tar image, it contains all of the necessary stock images except for modem.bin.
When the tab reboots hold vol up and power buttons to get into recovery. Clear data(factory reset) and clear cache then reboot. It will now boot normally, but you won't be able to use 3G and get prompts about data roaming, which you can ignore. Now that the Tab boots it's time to flash it back to Verizon stock.
Visit http://www.droidforums.net/forum/sa...84-how-restore-vzw-galaxy-tab-stock-dj11.html and download the stock Verizon firmware zip. Do NOT follow the instructions from that thread, it will result in an endless bootloop. Shut down the tab and enter download mode then flash System, Cache, Kernel and Recovery with Heimsdall. Do NOT flash param, it makes the Tab bootloop(I don't know why, don't ask). After reboot you may get some error messages about unable to mount cache or find files, don't worry it's normal. Just get back into recovery clear data and cache then reboot. VOILA, your tab is now back from the dead.
alex2792 said:
Here's a brief how-to that revived my Verizon Tab. These worked for me, but YMMV, I'm not responsible if you brick your Tab into a permanent paperweight mode.
Download stock Sprint firmware(the file doesn't have the modem.bin, but it still worked fine), get it here Tab Stock - No Modem.rar
Unzip the file then use Odin to flash the .tar image, it contains all of the necessary stock images except for modem.bin.
When the tab reboots hold vol up and power buttons to get into recovery. Clear data(factory reset) and clear cache then reboot. It will now boot normally, but you won't be able to use 3G and get prompts about data roaming, which you can ignore. Now that the Tab boots it's time to flash it back to Verizon stock.
Visit http://www.droidforums.net/forum/sa...84-how-restore-vzw-galaxy-tab-stock-dj11.html and download the stock Verizon firmware zip. Do NOT follow the instructions from that thread, it will result in an endless bootloop. Shut down the tab and enter download mode then flash System, Cache, Kernel and Recovery with Heimsdall. Do NOT flash param, it makes the Tab bootloop(I don't know why, don't ask). After reboot you may get some error messages about unable to mount cache or find files, don't worry it's normal. Just get back into recovery clear data and cache then reboot. VOILA, your tab is now back from the dead.
Click to expand...
Click to collapse
I love you. I'm going to try this tonight!
Coolsaber57 said:
I love you. I'm going to try this tonight!
Click to expand...
Click to collapse
are you have a sprint tab (( sph-p100 )) ???
if you have it and it is working can you explane to us what you do
saud11 said:
are you have a sprint tab (( sph-p100 )) ???
if you have it and it is working can you explane to us what you do
Click to expand...
Click to collapse
I have a VZW tab. If you follow the instructions above, it should be even easier for you as you don't have to flash the verizon files.
I'm not sure about the Sprint modem though.
alex2792 said:
Here's a brief how-to that revived my Verizon Tab. These worked for me, but YMMV, I'm not responsible if you brick your Tab into a permanent paperweight mode.
Download stock Sprint firmware(the file doesn't have the modem.bin, but it still worked fine), get it here Tab Stock - No Modem.rar
Unzip the file then use Odin to flash the .tar image, it contains all of the necessary stock images except for modem.bin.
When the tab reboots hold vol up and power buttons to get into recovery. Clear data(factory reset) and clear cache then reboot. It will now boot normally, but you won't be able to use 3G and get prompts about data roaming, which you can ignore. Now that the Tab boots it's time to flash it back to Verizon stock.
Visit http://www.droidforums.net/forum/sa...84-how-restore-vzw-galaxy-tab-stock-dj11.html and download the stock Verizon firmware zip. Do NOT follow the instructions from that thread, it will result in an endless bootloop. Shut down the tab and enter download mode then flash System, Cache, Kernel and Recovery with Heimsdall. Do NOT flash param, it makes the Tab bootloop(I don't know why, don't ask). After reboot you may get some error messages about unable to mount cache or find files, don't worry it's normal. Just get back into recovery clear data and cache then reboot. VOILA, your tab is now back from the dead.
Click to expand...
Click to collapse
I'm following your instructions, and I just flashed the tab with the sprint .tar file you posted. How do I flash this in Odin? I'm using Odin v1.3.. Everytime it flashes it goes through OK but then won't boot up. It will just flash the Samsung logo on and off really quick. I can get into download but not into the recovery.. Any tips?
Hmm you can try reformatting with the pit file in the sprint stock package.
Sent from my PC36100 using Tapatalk
alex2792 said:
Hmm you can try reformatting with the pit file in the sprint stock package.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Do not do this if you have a VZW tab!!!
I think I just bricked my tab doing this!! I cannot get into Download mode anymore, booting up just shows (in pictures):
Cell Phone ... !...Computer
Did you install the BootStrapper after Rooting the Tab?
I tried so much times to Brick my VZW Tab on purpose. Always end up fail after fail.
With proper directions to follow through, you can not go wrong to Fail.
Did you flash the VZW Klean.Mod V2? I am using that now, never failed once!! Still loving it all the time!!
[VZW]KhasMek's K-leanMod v2- http://forum.xda-developers.com/showthread.php?t=941749
If you need help, just PM me. Sorry my reply are slower than usual now a days...
You can still flash it with Odin,your tab isn't dead.
Sent from my SCH-I800 using Tapatalk
ekoandrew said:
Did you install the BootStrapper after Rooting the Tab?
I tried so much times to Brick my VZW Tab on purpose. Always end up fail after fail.
With proper directions to follow through, you can not go wrong to Fail.
Did you flash the VZW Klean.Mod V2? I am using that now, never failed once!! Still loving it all the time!!
[VZW]KhasMek's K-leanMod v2- http://forum.xda-developers.com/showthread.php?t=941749
If you need help, just PM me. Sorry my reply are slower than usual now a days...
Click to expand...
Click to collapse
Heh, I followed all directions, but my tab decided that it was going to corrupt something, reboot, and fail to get past the Samsung logo.
Oh, and I'm not totally bricked. I flashed those sprint files again (the tab was still allowed to connect to Odin) and I'm back to a flashing Samsung screen.
Coolsaber57 said:
Heh, I followed all directions, but my tab decided that it was going to corrupt something, reboot, and fail to get past the Samsung logo.
Oh, and I'm not totally bricked. I flashed those sprint files again (the tab was still allowed to connect to Odin) and I'm back to a flashing Samsung screen.
Click to expand...
Click to collapse
Same thing happens to me when I flash the Sprint Rom via Odin. I get a flashing Samsung screen.. I can't get it to boot or go into recovery.
kgelso said:
Same thing happens to me when I flash the Sprint Rom via Odin. I get a flashing Samsung screen.. I can't get it to boot or go into recovery.
Click to expand...
Click to collapse
I am going to wait until someone posts an actual VZW dump (shouldn't be too long according to the guy in the other thread). Then try to reflash.
When I tried to use the Pit file to repartition, Odin hung at the "Do not Turn off Target" step. I couldn't stop it, kill the process, so I was forced to unplug.
I then wasn't able to get into download mode...or so I though. However, I held down the volume button + power, got a weird screen, but Odin could see it, so I re-flashed the Sprint files. Same flashing Samsung screen. So I then flashed the verizon files. Now i'm back to where I started lol. It just stays at the Samsung screen.
Coolsaber57 said:
I am going to wait until someone posts an actual VZW dump (shouldn't be too long according to the guy in the other thread). Then try to reflash.
When I tried to use the Pit file to repartition, Odin hung at the "Do not Turn off Target" step. I couldn't stop it, kill the process, so I was forced to unplug.
I then wasn't able to get into download mode...or so I though. However, I held down the volume button + power, got a weird screen, but Odin could see it, so I re-flashed the Sprint files. Same flashing Samsung screen. So I then flashed the verizon files. Now i'm back to where I started lol. It just stays at the Samsung screen.
Click to expand...
Click to collapse
We are in the same boat.. Let me know when you get the VZW files.
kgelso said:
We are in the same boat.. Let me know when you get the VZW files.
Click to expand...
Click to collapse
He posted them! I downloaded them and am also hosting it on my Dropbox:
http://dl.dropbox.com/u/16395996/Verizon-GTab-Stock.zip
I was wondering how it was possible to brick your phone (which somehow happened to me..) just by trying to get into CWM Recovery by doing the 3 button press.. As it is possible because it happened to me earlier today I was just wondering if it was a step that I did wrong.. Also I had nothing installed except flashing the Froyo EB01 modem which flashed successfully and than reflashed cwm recovery all which worked though I forgot I had to reboot fast or else samsung would replace cwm. So when I flashed a second time and than tried rebooting into cwm that's when it got stuck and bricked..
I got it solved earlier thanks to Adranalyne.
If anybody needs his thread for the all in one odin:
http://forum.xda-developers.com/showthread.php?p=9711053
Ensure it's not simply blank screen...hit search soft key when it ' should' go into cwm
Sent from my SCH-I500 using XDA App
Shadowchasr said:
Ensure it's not simply blank screen...hit search soft key when it ' should' go into cwm
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Naw, it was stuck on the samsung logo screen for an hour-got bricked. But i fixed it .
Can someone explain how exactly you fix it? I am having that problem as we speak...
sengokubattosai said:
Can someone explain how exactly you fix it? I am having that problem as we speak...
Click to expand...
Click to collapse
Odin it back to stock. Either Dl01 or Eb01. Both files include everything for you to recover your phone ans be able to boot back up past the samsung logo.
Taking it back to EB01 every time can be a bit extreme. There are CWM tar files that you can use to just flash CWM with Odin. I've used them when my phone would not boot into recovery. Remember the best way to get to "Download" mode is to pull the battery and while holding the down vol button plug it into your PC. I know thats common knowledge but it's always good to put it out there. Other techniques can prevent Odin from establishing a connection.
I've even seen complete Super Clean tars up to 2.6. I don't remember where but when 2.7.1 bricked my phone I just used Odin to flash a 2.6 tar and my phone was back to normal. Now I use that ROM image instead of EB01 when an update fails.
I would stress that any ROM compiled by someone else is not going to be endorsed by the Dev that created the update. I just took a chance because I was already down and it worked great.
Hello all, I'm basically freaking out as I just got my Samsung Galaxy Continuum within the last 24hours and already managed to screw it up. I used superoneclick to root the phone with no issues. I then got Titatnium Backup and enabled the chuck norris thing to freeze bloatware. I rebooted the phone and now it says Samsung lights up the intro screen and then after that I can't see ANYTHING. Please if anyone can help I'm moving to Seattle in 2days and this will be my only source of info/communication till my things arrive 10days after me. I NEED this to work : /
Any help would be greatly appreciated.
Aaaahahaha you're so screwed. See, God is punishing you for voiding your warrenty.
I'm kidding. Try to relax. I've recovered my phone from worse than that. I'll look into it today when I get to work and see what I can come up with.
Sent from my Samsung Droid Charge 4G-LTE
Aesik said:
Hello all, I'm basically freaking out as I just got my Samsung Galaxy Continuum within the last 24hours and already managed to screw it up. I used superoneclick to root the phone with no issues. I then got Titatnium Backup and enabled the chuck norris thing to freeze bloatware. I rebooted the phone and now it says Samsung lights up the intro screen and then after that I can't see ANYTHING. Please if anyone can help I'm moving to Seattle in 2days and this will be my only source of info/communication till my things arrive 10days after me. I NEED this to work : /
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Just go into development section, find a stock odin .tar and odin itself and use it to reflash the latest stock rom. Dont panic, Its pretty hard to brick a Samsung, not impossible but pretty hard.......
Sent from my SCH-I510 using XDA App
I appreciate the quick responses, I'm honestly losing it the phone was a gift and here I am mucking it up. I would like to keep it rooted as my last phone was and never had an issue. I think the issue was somewhere with the Titanium Backup Mod. Is there anychance you could link me to this odin flash program you speak of? I'm very new to this and confused, would rather not make this problem worse. Thanks again!
Ok I have downloaded Odin3, now I just need to know how to use it and with what files to get my Continuum working again. I tried to read through some posts but everyone is so confusing >.<.
Ok so I think I did it in the correct order but, I'm still not sure I'm so lost. I go Odin3 and the .pit file for the continuum and the .tar file for CWR. I put into recovery mode or whatever with the little android guy digging, and then ran the odin program. It said it was succesful and passed but, when it rebooted itself it's the same deal. It loads up and then halfway through the intro screen it freezes and turns the screen off while the sounds finish with there little jig. I've tried to call my cell from another phone and it's acting as if it's turned off.
Aesik said:
Ok so I think I did it in the correct order but, I'm still not sure I'm so lost. I go Odin3 and the .pit file for the continuum and the .tar file for CWR. I put into recovery mode or whatever with the little android guy digging, and then ran the odin program. It said it was succesful and passed but, when it rebooted itself it's the same deal. It loads up and then halfway through the intro screen it freezes and turns the screen off while the sounds finish with there little jig. I've tried to call my cell from another phone and it's acting as if it's turned off.
Click to expand...
Click to collapse
first some questions,
did you do a nandroid backup
did you download the odin files from dj20 thread
did you download cwm recovery
and you dont really need the pit file, i been flashing files without it
Files
Aesik said:
Ok so I think I did it in the correct order but, I'm still not sure I'm so lost. I go Odin3 and the .pit file for the continuum and the .tar file for CWR. I put into recovery mode or whatever with the little android guy digging, and then ran the odin program. It said it was succesful and passed but, when it rebooted itself it's the same deal. It loads up and then halfway through the intro screen it freezes and turns the screen off while the sounds finish with there little jig. I've tried to call my cell from another phone and it's acting as if it's turned off.
Click to expand...
Click to collapse
http://dl.dropbox.com/u/20459391/SCH-i4000-VZW-Continuum.pit
http://dl.dropbox.com/u/20459391/0530_continuum_novoodoo.zip
Use this pit and this kernal in pda via Odin. Jump in the IRC for more help.
i think i bricked my continuum too. i flashed cwm recovery and got root and everything fine, then accidently flashed the wrong voodoo file and now it wont go past the samsung screen. ive looked for stock roms everywhere. how do you flash the kernel and pit. i got the pit file in but how do you select the folder for the kernel
can you still get into recovery?
VOoDOo
VooDoo convert takes a long time. Have you tried to wait it out?
Hello I too have prob. I flashed clean rom then tried to restore my nandroid backup but it says error mounting system and I cant now wont go past samsung no matter what I try?
Go to the link below. The only problem is the one-click unroot has a peculiar side-effect: it will make you believe your Continuum is invincible, and you'll try all sorts of crazy stuff with it!
http://www.addictivetips.com/mobile/one-click-unbrick-for-samsung-phones-having-odin-guide/
I forgot to mention, you need to be in download mode. Remove the battery, and hold the vol- while inserting the usb cable until the screen indicates that you're in download mode. I hope this helps!
Ok I got it to boot into clean rom again but along the way I did a system wipe so my question is how to restore backup and get apps/data back? What was I doing wrong? I have titpro and nandroid backup saved and copy of sd card on my laptop so any help is appreciated...
Sent from my SCH-I400 using XDA Premium App
nodixe said:
Ok I got it to boot into clean rom again but along the way I did a system wipe so my question is how to restore backup and get apps/data back? What was I doing wrong? I have titpro and nandroid backup saved and copy of sd card on my laptop so any help is appreciated...
Sent from my SCH-I400 using XDA Premium App
Click to expand...
Click to collapse
A nandroid backup isn't going to be much help without root. If you have it, get rooted, and flash adrynalyne's framework and cwm. Then you should be able to restore.
Ok...so I need to reroot? This why I wanted to restore it in 1st place. Su is installed and it opens from appdroor but says bin needs update but the zip wont work that it dl's to my sd? I thought root was included on clean rom? Or do I have to SOC again?
Sent from my SCH-I400 using XDA Premium App
Uh... Your restore problem is probably because your using yellow cwm... it has problems.... Im not sure if there are any other questions really xP
And read the other threads please? Everybodys already had these problems and they've been solved months ago
Sent from my Continuum Transfunctioner
nodixe said:
Ok...so I need to reroot? This why I wanted to restore it in 1st place. Su is installed and it opens from appdroor but says bin needs update but the zip wont work that it dl's to my sd? I thought root was included on clean rom? Or do I have to SOC again?
Sent from my SCH-I400 using XDA Premium App
Click to expand...
Click to collapse
You might have to SOC again. Alternatively, if you really need it, I have a DL17 ODIN bone-stock rom, both rooted and unrooted, and if push comes to shove, I can upload it and post it here.
The yellow CWM uses edify which to my understanding is only useful for 2.2 and above. You wont be able to install any zip files designed for 2.1 or before. You need the cyan version of update.zip which will allow you to reinstall the stock rom software. Send me a PM and Ill email you the proper update.zip file if you need it.
-J
Hey I just seriously screwed my self over bassicly I tried to get miui to boot from the samsung fascinate however when I installed it in cmr it spassed out then powered of then went to the bootloader and I get a red error message saying can't mount data or something so then I tried to reinstall Eco 3 Odin using Odin and it worked it booted but it says I have zero data on my phone and I can't install anything. I also tried the oneclick soft unbricker but it fails saying adb divers are not installed when they are. I'm doing this on my phones browser witch is the only thing that seems to be working right now I also tried a band restore but I got the same data error message.
Have you tried restoring to DL17 and then re-upgrading to 2.2?
And how about a good old odin flash?
In worst case, I would ask imnuts for the full odin package, or use a fascinate full odin package to get you off your feet, then reflash the modem, and recovery, then wipe In recovery cyan cwm... Then flash ec03
Sent from my SCH-I400 using XDA Premium App
wait wait, is this on a Continuum or Fascinate?
Nuckin said:
wait wait, is this on a Continuum or Fascinate?
Click to expand...
Click to collapse
He is on a Continuum, but you can use a fascinate Odin package to reformat partitions if they get messed up, then just reflash recovery and start fresh if you can get in then... That wasn't a really good thing though to suggest to a newcomer necessarily, so thank you for pointing that out
okay heres what happened firts i wanted to see if i could get the miui rom for the samsung fascinate to boot on the continuum there pretty much the same phone minus the ticker and screen size so i went into clockwork mod and wiped everything then went to install zip from sd card and clicked on the miui rom witch was the process we always used on the hero. then after i clicked on it, it started to install then my screen started shacking and my phone turned off. when i turned it back on it when to the bootloader and a red error message poped up saying
e:cant mount /dev/blockstill(invalid argument
and when i go to recovery it says the same thing when i try to wipe/restore nand it says the same thing. so at that point i powered off and went to download mode and reinstalled eco3 odin using pda mode on odin and it worked then it rebooted and i got to the set up screen and i got 2 force closes daily brefeing and something else i went ahead and skipped all that stuff and it loaded fine after that. however now for some reason it says i have zero system memory so i cant install any apps or save data however it does recognize my sd card but i cant install to sd card. so bassicly the phone functions just no internal memory. at this point i honestly dont know what to do everything on the hero was simple and straight forward and we never ran into these kind of problems. ive also tried to restore my nands and reinstall clockwork mod but still no dice. what i need to do now i guess is get the necessary files to go completely stock and see if that helps. and if someone could point me in the direction to those files i would really aprechiate it. oh and i tried the one click unbricker it sayed success but didnt really do anything.
oh and i know trying to install miui was stupid but i was just wanting to see if it would boot lol.
Download the PIT file in the Development forum, as well as the DL17 Odin package from the FAQ of the EC03 post I made. Flash the DL17 in PDA, with the PIT, and re-partition selected. After that, you should be back on DL17, and can do whatever you want from there.
huzzza!!!
thank god that worked thank yall so much i still cant believe that just happened but restoring the stock odin image worked and all is well. so i guess tommorow i can reroot and restore my nand.
once again thank yall for the help.
Hi,
I have been searching and searching. I tried to install a kernel to my phone, its been forever so i don't remember which one.
It just reboots every 5 seconds without any screens coming up. I can not get into recovery mode
I can get into download mode and have flashed stock I337UCUAMDB_ATTAMDB_I337UCUAMDB with odin, but it doesnt fix anything.
What can I do to get to stock recovery and fix my phone?
What happens if you put it on download mode and then cancel with vol down
It falls back into the bootloop of restarting every 5 seconds with no screens coming up. No entry into recovery.
And if you pull the battery and put it back in does it try to boot?
What firmware were you on and was it loki'd if you were on mdl?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I have taken the battery out and replaced it. It does not automatically try to boot. After pressing power it goes into the same boot cycle. Also, thank you for your quick attention!
megatilter said:
I have taken the battery out and replaced it. It does not automatically try to boot. After pressing power it goes into the same boot cycle. Also, thank you for your quick attention!
Click to expand...
Click to collapse
When did it start doing what's it's going. Did you do anything before hand? Do you know what firmware you where on before you tried odin? Was it mdb?
"What firmware were you on and was it loki'd if you were on mdl?"
Previous to my obvious blunder with the kernel download, I was using goldeneye rom from android develepment, sucessfully.
Dont know if that answers the question but i have also tried to flash AMDL with odin but have the same results.
megatilter said:
"What firmware were you on and was it loki'd if you were on mdl?"
Previous to my obvious blunder with the kernel download, I was using goldeneye rom from android develepment, sucessfully.
Dont know if that answers the question but i have also tried to flash AMDL with odin but have the same results.
Click to expand...
Click to collapse
When you used odin did you only have f.reset and auto-reboot checked and flashed the md5 file in PDA
jd1639 said:
When you used odin did you only have f.reset and auto-reboot checked and flashed the md5 file in PDA
Click to expand...
Click to collapse
I have done it multiple times, perhaps panicking, I checked the re-partition button. I have tried to get a PIT file downloaded and tried to use that.
However, this behavior was happening before I did that. It started boot looping as soon as i tried to use TWRP to flash the kernel (I know i am an idiot, and didn't read first). As soon as this started happening, that's when I immediately tried to flash AMDL (exactly as you described with only those options checked) through odin and it didn't do anything different. That's when i tried other options. I fear i may have broken my phone. Again thank you for your attention.
megatilter said:
I have done it multiple times, perhaps panicking, I checked the re-partition button. I have tried to get a PIT file downloaded and tried to use that.
However, this behavior was happening before I did that. It started boot looping as soon as i tried to use TWRP to flash the kernel (I know i am an idiot, and didn't read first). As soon as this started happening, that's when I immediately tried to flash AMDL (exactly as you described with only those options checked) through odin and it didn't do anything different. That's when i tried other options. I fear i may have broken my phone. Again thank you for your attention.
Click to expand...
Click to collapse
I think you've broken it too. Sounds like you flashed the wrong kernel and at that point you were more or less hosed. Look into jtag, mobiletechvideos.com. They can probably fix it. It'll cost you $60.00 +
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
I think you've broken it too. Sounds like you flashed the wrong kernel and at that point you were more or less hosed. Look into jtag, mobiletechvideos.com. They can probably fix it. It'll cost you $60.00 +
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
i've never seen a kernel hard brick a device or corrupt the recovery partition. i also rarely see a user flash a file and not remember what they just flashed. he/she possibly flashed an incompatible kernel or flashed a non-loki'd kernel without flashing loki-doki. either way, recovery would still be accessible to correct this issue. i feel that there is more to this.
OP, see jd's jtag post above.
megatilter said:
I have done it multiple times, perhaps panicking, I checked the re-partition button. I have tried to get a PIT file downloaded and tried to use that.
However, this behavior was happening before I did that. It started boot looping as soon as i tried to use TWRP to flash the kernel (I know i am an idiot, and didn't read first). As soon as this started happening, that's when I immediately tried to flash AMDL (exactly as you described with only those options checked) through odin and it didn't do anything different. That's when i tried other options. I fear i may have broken my phone. Again thank you for your attention.
Click to expand...
Click to collapse
Well I finally was able to get Kies working and did a firmware update. That gave me back regular recovery. Now Im stuck at bootloop att screen.
I then re flashed AMDL stock via odin and VIOLA!
Im back to stock baby!
And from there ill probably go back to Goldeneyes Rom and never think about this ever again. Thanks for your time. My phone is working again!
Also
Thank you for helping me at least by giving this thread attention. So much appreciation to the fine people here at XDA
megatilter said:
Well I finally was able to get Kies working and did a firmware update. That gave me back regular recovery. Now Im stuck at bootloop att screen.
I then re flashed AMDL stock via odin and VIOLA!
Im back to stock baby!
And from there ill probably go back to Goldeneyes Rom and never think about this ever again. Thanks for your time. My phone is working again!
Also
Thank you for helping me at least by giving this thread attention. So much appreciation to the fine people here at XDA
Click to expand...
Click to collapse
Great news! You got lucky, make sure you read and learn on xda. And always know what you flash.
megatilter said:
Well I finally was able to get Kies working and did a firmware update. That gave me back regular recovery. Now Im stuck at bootloop att screen.
I then re flashed AMDL stock via odin and VIOLA!
Im back to stock baby!
And from there ill probably go back to Goldeneyes Rom and never think about this ever again. Thanks for your time. My phone is working again!
Also
Thank you for helping me at least by giving this thread attention. So much appreciation to the fine people here at XDA
Click to expand...
Click to collapse
Care to share how you got Kies working? I have a similar problem and I can't get Kies to recognize my phone.
Fix!
So What you gota do
1. Pull Out Battery Put back in
2.Go To Download Mode
3. Download The TWRP.tar For Your Phone
4.Run Odin as Admin, Tick Pda, for pda select the TWRP.tar
5. Hit Start, Then Pull Out battery put it back in
6.Get A Micro Sd And Put The Cyanogenmod Rom, and the gapps the ones for your phone
7.Insert microsd in phone
8. Boot Recovery and go to mounts and mount the microsd
9, Go Advansed, file manager, ext sd, And Copy the cyanogenmod and the gapps to internal storage
10. Flash the cyanogen mod and the gapps. DO THIS PART CAREFULLY OR MIGHT HARD BRICK!
11. Reboot And youl boot to cyanogenmod! OH yeah! Replay if this helped or if you have any problems