Database Users

Bricked Artemis

Hi,
When I was flashing Artemis WWE 3.13 Official update, due to my PC failure rom update failed at 99%. Now i cant boot my Artemis and its stuck at bootsplash. To use USPL , I need to ActiveSync it, but I can't as its not booting up. I tried flashing back same ROM but it gave me Invalid Update error. Please advise me any other way to do CID unlock(in bootloader) and flash it again.
Thanks
Nishant

My artemis/orbit has bricked aswell i have been told to try and sd card flash it do that see if it works for u

MAJOR CRASH - Unable to restore via ODIN

This morning my phone crashed while I was trying to run gReader. Upon reboot, the phone would just hang at a black screen after the initial SGS Logo.
I decided to recover and put the device into download mode, launched ODIN and tried to flash JP3, JM5 and JG8, all to no avail. At the reboot after ODIN is complete I get the Samsung recovery utilities and then an error message as follows:
Update media please wait ...
E:Can't Mount /dev/blk/mmcblk0p1 (invalid argument)
E:copy_dbdata_media: Can't mount SDCARD:
copy default media content failed
Trying to format the internal SDCARD from Recovery Utils gives the same error
I am stuck! Any ideas?

that's beyond me.
you got into download mode, that's good
but when flashing you get that error, that's not good
did you use the 1 click lag fix?
never mind i see your siggy you were on Modaco rom... hmm...
try Odin-ing a stock ROM, and see if that fixes your phone?
then Odin back whatever is your custom ROM

You are further through the flash process than I was when I ran into problems, plus have a Vibrant over a European Galaxy S - but I'd still try a 'blank' flash with Odin. Enter download mode, connect up and let Odin run without any files linked in. This got me back into the phone and then allowed for a proper new fw flash thereafter.

No matter what I did I could not get the internal SDCARD recognized. A trip to the Bell store and a DOA swap and now I have a new device.

Any update on how to fix this?

[Q] rom Flashing faild

Hey,
i tryed to flash my vodafone DE brand Trophy with the instruction of ansar,
after 9% it stops "Flash write error happend, please check your PDA Phone"
and on the right side there is a kind of a error message "IU534",
Now my trophy doesn`t boot anymore. Just the bootloader.
What shall i do now?

have you tried redownloading the image and tryed flashing again,,,,,,,dont know if it would work,maybe a corrupt download ?
new to these myself but my flash went ok,,,not same image

i think the download is ok otherwise i couldn have unpacked the .zip file

Do I broke my HD Mini?

Hello,
I have serious problem with my phone. I bought HTC with windows mobile and some time ago I have installed Android from this topic http://forum.xda-developers.com/showthread.php?t=1455555 I chose nand-boot option so windows had been deleted from hard memory. Then 5days ago I decided to do an upgrade of Android. Downloaded new version of Android and tried to install it from old Android, system crashed and I can’t do anything in bootloader know. It's only this message:
nand id: 0x5500bcec maker=0xeo device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
flash_read_image: failed (319 errors)
ERROR: Cannot read recovery_header
flash_read_image: failed (5056 errors)
ERROR: Cannot read kernel image verting to fastboot mode.
ENTERING FASTBOOT MODE
udc_start()
Click to expand...
Click to collapse
When I press Volume Up or Down nothing happens. So I decided back to windows but I have problem with install it. When I try to install original ROMs have this ERROR 294 -> Invalid vendor id. When try to install custom ROM with using SSPL I have other ERROR [262] -> Update error. I tried to installation from SD card but nothing happens in 3 colors bootloader.
Please help me…

http://forum.xda-developers.com/wiki/RUU_Errors#ERROR_.5B294.5D_:_INVALID_VENDOR_ID
are you sure you followed the steps correctly when you tried to install from sd card?(explain what you did and nothing happened)

tzacapaca said:
http://forum.xda-developers.com/wiki/RUU_Errors#ERROR_.5B294.5D_:_INVALID_VENDOR_ID
are you sure you followed the steps correctly when you tried to install from sd card?(explain what you did and nothing happened)
Click to expand...
Click to collapse
Hi I've the same problem, I don't know what to do, is there anyone who has got an hint?
I cannot reinstall the ROM because the damn INVALID VENDOR, I canno use SSPL_RUU.exe as suggested in this forum because it must be run from WM and not from the coloured strips screen..
is there a solution? please!

you should try your original WM ROM, or for android these aren't any problem.. it's because bad installation,

i broke my bootloader too. cant enter recovery or something else. someone an idea? :/

reinstall recovery from windows>usb>htcHDmini

HelpGT-I9300I odin theres no partition ,mmc write fail.Only start in dowloading mode

Good evening,
This is the first time I post here and my GT- I9300I was working but the battery had just quickly ( 1 hour use at most , heated machine ) and my IMEI was null \ null. I bought the unit secondhand but I was trying to solve these problems by odin , I backup the efs folder and etc ... But to try at Odin in any version flash the device came across the error " There's no partition pit ", and in so downloading the message : " mmc write fail" . Soon after I tried to restore the cell the way recovery along with the sd card but without success . I then decided to take a cw and flashing by cell own which caused the device now only is in downloading mode and I can not put him or download mode or turn it again. It already starts in recovery mode! If you can help me thank you !!

* I tried to flash the cw to fix the recovery mode problem that was not able to format the memory card

anyone ? my error is stupid ?