Related
I installed WIFI tether and barnacle tether. When I try to connect it to my IPAD it finds it but wont establish a connection. Anyone have any ideas why?
yrush71 said:
I installed WIFI tether and barnacle tether. When I try to connect it to my IPAD it finds it but wont establish a connection. Anyone have any ideas why?
Click to expand...
Click to collapse
are you rooted?
Steve Jobs says you're holding your iPad wrong. Must not be within five miles of an Android device for WiFi to work.
It is rooted. My friend at work can connect to it using her iphone but not my IPAD.
Does your iPad connect to any other WiFi?
I connected an iPad to my Android phone using Wireless Tether just yesterday. And while the iPad connected fine and showed plenty of signal, things were really, really slow. I had a good 3G signal on the phone, and it wasn't doing anything else. I downloaded and installed speed test on the iPad, which reported about 250 kbps both up and down.
As for getting the wifi connection working, I don't know what to suggest. I just went into settings, general and tapped on the SSID my Android is setup to use. I have access control turned on through Wireless Tether, so I had to then grant it access there as well.
Good luck.
That happened to my friend too. Try turning off WiFi on ipad, then turning back on. That worked for us.
i use wifi tether with my iPad all the time. works great. ekot831 is right, try turning the ipad wifi off and on again. I think mine gets stuck acquiring a new IP address. this always fixes it for me.
good luck!
Also, make sure you are using a wifi tether app that supports infrastructure and not just ad-hoc. Apple devices don't play nice with ad-hoc.
I have a droidX, and was syncing the two devices to push a file across them when I saw bluetooth tethering... it works flawlessly. I never even heard about this during all the "screw the data plan, I'll wifi tether my tablet" hoo-ha.
Basically: sync up a phone with the tablet so they see each other.
Then go into bluetooth settings on the Xoom: settings > wireless and networks > bluetooth settings > paired devices > (YOUR PHONE)... and click the wrench icon. There's a tether option right there sitting in broad daylight... no need to even have a rooted handset I guess?
works great for me.
baller status.
Cool! That's great for those of us with OG Droids who can't use infrastructure mode.
I'm curious though. If I'm tethering via bluetooth, will I simultaneously be able to use my bluetooth headset with the XOOM, or my Droid for that matter?
ixobelle said:
I have a droidX, and was syncing the two devices to push a file across them when I saw bluetooth tethering... it works flawlessly. I never even heard about this during all the "screw the data plan, I'll wifi tether my tablet" hoo-ha.
Basically: sync up a phone with the tablet so they see each other.
Then go into bluetooth settings on the Xoom: settings > wireless and networks > bluetooth settings > paired devices > (YOUR PHONE)... and click the wrench icon. There's a tether option right there sitting in broad daylight... no need to even have a rooted handset I guess?
works great for me.
baller status.
Click to expand...
Click to collapse
Good lord! This actually freaking works! I'm typing this post from my Xoom that is bluetooth tethered to my droidx. Thank you google for this crazy easter egg
Ok, I may be dumb and not really familiar with bluetooth, but can I get some help with this? I've got them paired, but how do I get them to connect?
so does this mean anyone with a smartphone data plan should not need the pLAN for xoom?
I dont see a tether option.
Same with me, paired but not connected.
Verizon fascinate.
My Dx pairs but is unable to connect :-(
I'm trying to connect to my OG droid and I am having trouble connecting as well. It pairs just fine. To the users having trouble, are you rooted with a custom rom and kernel? I'm trying to narrow this issue since others on the same mobile device are having success.
This doest work on atrix
Sent from my MB860 using XDA App
Do you have to be rooted (on the phone side) to be able to successfully do this? I have a Droid X and tried tethering my PSP the other night and no luck, might be a similar situation.
Droid Incredible. Which is rooted with a custom ROM.
Why not just use "wireless tether" form the market? Or does it not work on the Droid X? I was using it to tether my Xoom to my Evo running on Sprints 4G....
WiFi Tether doesn't work for some of us because Android doesn't connect through ad-hoc. The bluetooth solution sounds like our only option aside from wired tethering.
blozout said:
Why not just use "wireless tether" form the market? Or does it not work on the Droid X? I was using it to tether my Xoom to my Evo running on Sprints 4G....
Click to expand...
Click to collapse
My Droid X works fine with my laptop, but not with certain devices. My Xoom is being delivered later today and I'll let you know how it goes. =P
arrtoodeetoo said:
WiFi Tether doesn't work for some of us because Android doesn't connect through ad-hoc. The bluetooth solution sounds like our only option aside from wired tethering.
Click to expand...
Click to collapse
Is Bluetooth as relatively fast as WiFi?
Not sure.
Maybe someone who is able to do both could do a speed test.
Pair but can't connect with EVO.
Anyone wanna shed some light here? Is it just the Droid X this works with?
The DroidX has trouble with data connectivity(3g) with the current release Wireless Tether app. There is a prerelease 2.07 that fixes this. I am now wifi and bluetooth tethering without data disconnects. Download the release from the wireless tether website.
rquellet said:
The DroidX has trouble with data connectivity(3g) with the current release Wireless Tether app. There is a prerelease 2.07 that fixes this. I am now wifi and bluetooth tethering without data disconnects. Download the release from the wireless tether website.
Click to expand...
Click to collapse
I tether my droidx to my Xoom to use its unlimited data. Works fine, most of the time, but I do have to stop/start wifi tether on my droidx occasionally.
Update: I downloaded the experimental apk on the wireless tether's site and installed it on my Droid. My Xoom is now able to use my Droid's data via bluetooth option. JACKPOT!
Droid4All said:
Update: I downloaded the experimental apk on the wireless tether's site and installed it on my Droid. My Xoom is now able to use my Droid's data via bluetooth option. JACKPOT!
Click to expand...
Click to collapse
Ha, your welcome. Enjoy!
Cool! Got a link?
so with my minimal knowledge of phone stuffs ive kinda learned that when i run the wireless tether for root app on my phone it uses ad hoc to supply other computers with internet... basically im asking, will my evo be able to supply my xoom with internet?
Not at the moment, no support for Ad-Hoc networks in HC, not sure if there ever will be - very annoying.
I'm not sure but I believe there is a new version of Wireless Tether that will allow such a connection. When I first tried the Kindle connecting to my DX, it wouldn't connect. With the new version, it does.
Sent from my DROIDX using XDA App
My Xoom connects to my DX with no problems.
Go download Wireless Tether from the website. The experimental one is called Wifi Tether now. Works like a charm for infrastructure mode so that the Xoom can tether with your phone. Also Bluetooth seems to work fine as well.
Sent from my DROIDX using Tapatalk
Is the Wireless tether for the phone or the Xoom (or both)? I need an option for the iPhone in case the steps posted here won't work!
is this an app that enables ad-hoc detection on the Xoom,
or
does it just provide a full wifi hotspot tethering feature for Android devices?
I also use an iPhone which supplies an ad-hoc hotspot connection that I need my Xoom to recognize and connect to.
So does that mean you got it to work that way? Is the app available through the Market?
No its not available in the market. Google wireless tether and look for wifi tether. The new app sends the signal via infrastructure mode. I think it applies to certain phone like Droid X and EVO.
Sent from my DROIDX using Tapatalk
The Wireless Tether app is ran on the host phone wanting to be turned into a wifi hotspot. There are certain phones that run in Ad-Hoc mode in default (aka Droid 1) and the only option to tether the Xoom to them is via bluetooth. As others have said, the new version "WiFi Tether" is apparently enabling infrastructure mode rather than Ad-hoc mode, something that the Xoom can actually connect to.
There is no app that you install on the Xoom. When the WiFi Tether is ran on the host device, the Xoom just connects to it as a WiFi router and works just fine (or bluetooth if thats what you're doing).
So OP, if you can't get the new version of WiFi tether to work for you and your Xoom, try the Bluetooth tethering option, it's been shown in detail in a thread here how to do it, and it should work just fine.
funnycreature said:
Is the Wireless tether for the phone or the Xoom (or both)? I need an option for the iPhone in case the steps posted here won't work!
Click to expand...
Click to collapse
The app is for android, and for the host device not the Xoom, so you'll need to Bluetooth tether your iPhone.
wpa_supplicant
I understand exactly what the OP is talking about, as i'm trying to do the same thing. What makes matters worse, is that ad-hoc connections ARE possible in android. Meaning android can connect to ad-hoc networks, but it requires swapping out the wpa_suppplicant file in system/bin with a modified one that doesn't filter out ad-hoc networks.
i've even tested this on my EVO, and it connects to other android phones incapable of broadcasting in infrastructure mode, it even connects to my ubuntu netbook broadcasting in ad-hoc...
(if you want to see what i'm talking, just search the forums for wpa_supplicant, something will turn up )
I've tried doing the same "fix" with my xoom, but it doesn't take. Using ADB or root explorer, i've replaced the orignal (making sure to save a copy just in case) and fixed permissions to 775, but it doesn't take. The wifi antenna will turn on, but it doesn't find anything once being replaced, not even saved networks or access points. I can get wifi back by restoring my backup, but i'm at a loss as to why it doesn't work on the xoom (3.0) but does with my evo (2.3).
as a side note, i'm using the right replacement for the wpa version returned by entering
"wpa_supplicant -v" in a terminal emulator or adb. It returns version v0.6.10 and there is a working, modified, v0.6.10 that should make things work, but doesn't....
anyway, if anyone has any input, i would love to hear it!
I am in the same boat. Regardless of whatever permission settings I have tried (mentioned in the dev forums that I can't yet post in), I still get a dead wifi with the new supplicant file.
Ah, I feel better now. It must have been the supplicant file, as I found this other one and it worked without permission modifications first time out.
You will have to google "xoom supplicant" and use the file found on the first response (android.net)-I can't post the link- the downside to attitude having, overlord type forums is inability for new users to provide any help, or at least with any convenience.
i try connecting my xoom to my computer, and it wouldn't work. i have the "Intel My Wifi Technology" but each time i set up a connection, the xoom finds it, but will take like a minute trying to connect and all i see on the xoom is "Obtaining IP address". it shows on my computer that a new device is connected. maybe this only works computer to computer. cuz i have had success with another laptop connecting to my computer with no problem.
I am using the Launchpad kernel and the WPASupplicant file and am connected to my phone's ad-Hoc network now. I used the beta Wi-Fi Tether and it worked great, but crashed my Samsung Galaxy S at least twice a day. So I installed the WPA file without setting any special permissions, just used Root Explorer to copy it an it worked fine.
Is there a way to connect on a ad-hoc hostet by a laptop (win7) yet?
That would be interesting, cause if it work this way, it will work for every phone or something else!
Hey Guys,
i am having a little problem. i am using the Intel My Wifi Technology. and i don't know if i am doiing something wrong or this is just not possible. but i try connecting my xoom to my laptop, and it is not working or connecting. i get a message on the xoom that say's Obtaining IP address", but nothing happen on the xoom. is this not yet possible on the xoom. i don't know if this is consider ad-hoc network or not, cuz i am new to all this.
but here is the link to intel website for the program i am using as a wifi hotspot.
http://www.intel.com/products/wireless/mywifi.htm
and here is a video of what the program does.
http://www.youtube.com/watch?v=AuAQjR76A68
anyone with knowlwdge on this please help me understand what i am doing wrong or not doing. or even if this is a possibility.
If you're not opposed to rooting your Xoom, here's another option. I just unlocked and rooted my WiFi-only Xoom yesterday, and inserted the supplicant file in this thread: http://forum.xda-developers.com/showthread.php?t=1033314
It works like a charm! I'm running a WinMo Touch Pro 2 with WMWiFiRouter, and the Xoom now sees and properly connects to Ad Hoc networks. And, it still works with all other networks.
I don't know which way you prefer to attack the problem (from the Xoom or the phone), but I've been thrilled ever since I got all this done yesterday. Everything else on the Xoom is great, and now I've got the working SD card as well.
supremecream06 said:
Hey Guys,
i am having a little problem. i am using the Intel My Wifi Technology. and i don't know if i am doiing something wrong or this is just not possible. but i try connecting my xoom to my laptop, and it is not working or connecting. i get a message on the xoom that say's Obtaining IP address", but nothing happen on the xoom. is this not yet possible on the xoom. i don't know if this is consider ad-hoc network or not, cuz i am new to all this.
but here is the link to intel website for the program i am using as a wifi hotspot.
http://www.intel.com/products/wireless/mywifi.htm
and here is a video of what the program does.
http://www.youtube.com/watch?v=AuAQjR76A68
anyone with knowlwdge on this please help me understand what i am doing wrong or not doing. or even if this is a possibility.
Click to expand...
Click to collapse
Is it right that you host a Wifi on your computer and tether internet to you tablet? I think its the usual problem android and ad-hoch, witch not work!
I seem to be having problems tethering my A101 to my HTC Touch HD.
Bluetooth seems hit and miss. Any suggestions on correct procedure.
I also have a little app on my phone for establishing it as a wifi router. The app is wmwifirouter. While my lap top see's it fine the A101 just doesnt see it. Anyone managed to ge their A101 to tether to a wifi type connection their WM phone?
i'm having problem with it as well ... the A101 to my SE x10i ... the bluetooth can "see" the mobile but when it cannot pair ... this is plain stupid!!
i've tried to contact the Archos Support but no solutions as yet.
I tether my HTC Evo to my Archos 70 IT with zero issues. My Evo is rooted and I run the "Wireless Tether" app in the market (their website). It starts an ad-hoc WiFi access point that the tablet can connect to. I've never had any issues. The app supposedly works over bluetooth as well but I've never tried it.
I'm in the exact same boat as you airnike, except the issue is tether to my BlackBerry Bold 9780. I found a thread (listed below) that seems to offer me the possibility of getting my connection up and running - since it seems that it was a problem in the Archos firmware in the first place, maybe you can solve it by following the thread.
Because I am so new I cannot just post the URL, so here it is in a conveluted fashion.
h t t p ://forum.archosfans.com/viewtopic.php?f=63&t=46116
Stock Archos devices don't support ad-hoc networking, only infrastructure. Wireless Tether from the market supports ad-hoc and infrastructure mode. Some phones support infrastructure mode and some do not. If your phone does, you are lucky and it may work. There is a list of supported devices on the Wireless Tether website. There are also several threads on here about tethering and ad-hoc networking.
Tethering Blackberry is another problem, I think I read somewhere it was resolved now, but you need to type in a script in terminal.
Tethering Windows Mobile should be very easy. I always tether bluetooth from my Samsung i8000 to my 101. I never used wifi though as I reckon bluetooth is more battery friendly and speed is acceptable. What exactly is your tethering problem? what do you mean hit or miss? I've been consistently able to tether via bluetooth on my WM phone.
I have had some trouble tethering my Touch HD to my "101" as well - but finally this seems solved.
After pairing both devices, I found that I need to activate Bluetooth on both, then establish internet connection on the "HD" - and after that my "101" will tether fine.
The only strange thing I am a little unhappy with, is the fact that the tethering seems to break down when I turn off the screen of the mobile. When it switches off by itself, the connection appears to be stable.
i have a htc ozone wm phone how did u connect to your a101
What are the pro and cons of tethering via Bluetooth? I have Wi-Fi hotspot on my phone, and it worked perfectly right away. Could the Bluetooth use less battery?
Sent from my SilverBullet "HTCDesireZ running CM7"
This thread went a bit off topic eh?
Pete, did you ever get this working? I have a A101 16GB and a Touch HD. They tethered via bluetooth off the bat for me.
Running:
A101 16GB - UrukDrod 0.7
Touch HD - EnergyRom
If you want me to post steps, let me know.
Hello.
I'm having trouble tethering an Asus Transformer (stock) to my Touch HD (also stock).
I can pair them but they don't connect.
Tried the establish data connection/turn BT on/tether suggestion but no luck.
Any suggestions?
Cheers,
E
eborremans said:
Hello.
I'm having trouble tethering an Asus Transformer (stock) to my Touch HD (also stock).
I can pair them but they don't connect.
Tried the establish data connection/turn BT on/tether suggestion but no luck.
Any suggestions?
Cheers,
E
Click to expand...
Click to collapse
No clue. Wouldn't they know more in the Asus Transformer forums?
http://forum.xda-developers.com/forumdisplay.php?f=1104
I've found several threads on the subject of Tethering a Xoom via BT and Wifi but I'm not having much luck and there's a lot of confusion about providers/Xoom versions/phones, etc. so rather than tag on to a thread I hope it's ok to start a new one.
I have the following:
Wifi Xoom (NOT the Verizon version, the one that just came out on March 27th here in the US)
HTC Hero GSM - completely unlocked (purchased in Europe). Running Android 2.1 standard update from HTC. I'm using the AT&T data plan but device is not an AT&T device at all.
I would like to see if I can Tether the Xoom to the phone and use the data connection I have on it. I understand that the Xoom's chipset doesn't allow for Ad-hoc networks. I've tried to do a Wifi Tether and although that works from my Laptop to my Phone the Xoom doesn't see the ad-hoc network. I don't believe there is any way for me to make the Wifi Tether work in Infrastructure mode so I don't think there is an option there (unless the Xoom can be modified somehow to see Ad-hoc).
So now I'm trying to use Bluetooth Tethering. I've tried both PdaNet and Wifi Tether (v2.0.7 and phone rooted via SuperOneClick). Both seem to start up fine and are running. I then pair the two devices but as many others have reported, I don't see any Tethering options on the Xoom so I'm stuck.
I've tried different orders of things... run Wifi Tether, pair, vs. pair then Wifi Tether, work with Airplane mode on vs. off, Wifi on vs. off, etc. but I never see that Tether option show up.
Anyone have this working with an HTC Hero GSM by any chance? Note that this is the Wifi-Only Xoom which seems to have different features than the Verizon 3G Xoom. Could it be that the Hero itself doesn't support this profile? Or can the Xoom be modified to force it to think the device is tetherable.
I'm not sure if rooting the Xoom would help any or maybe flashing a custom ROM like CM7 on the Hero would help any. I'd prefer not to have to do this but if someone has this working with my exact configuration I'd give it a try.
Any help would be appreciated.
From what i know, most tethering tech /apps are establishing a ad-hoc network' which the xoom isnt capable of...
I too have the Xoom wifi only version with a HTC rooted CDMA Hero.
As everyone knows now the Ad hoc will not tether with the Xoom infrastructure as of the latest.
I too get full bluetooth tethering signal from Wireless Tether, but like you the Xoom will "pair but not connect". As you, I am confused as to whether it is the Hero or the Xoom Wifi which will not connect to the bluetooth tether.
I suspect it is the Xoom Wifi, but would also like a definitive answer and better yet a viable solution.
I have no issue tethering my Xoom (Wifi model) with my Verizon Motorola Droid (1 Gen) over Bluetooth.
My Droid is full rooted with custom Gingerbread ROM (2.3.3) and Overclocked Kernel from ChevyNo1. His kernels are everything enable such as tethering and VPN. This might be the difference for some.
The one annoying thing is that everytime I enable the hotspot on my Droid, I have to go into the Xoom settings and enable tethering on the connection to my Droid. This also has to be done if either device goes not a range and brought back. I am trying to find a widget or a Tasker script to auto enable this.
Be sure to already start the wifi tether program on your phone (selecting the blutooth option on it) then bring up the blutooth settings menu on your xoom, just press and hold the little wrench you see to the right of your phone icon. it should bring up the tether option...just press that and you should see it conect via blutooth.
Just be sure to have the wifi tether app on your phone already on and set for blutooth. This works for me everytime (running the atrix) and shoujkd also work for your phone too.
Still no luck on my side with the Tethering on while I do the pairing and/or when I touch the wrench icon.
I'd like to understand more about how the Bluetooth profile is detected. Does my phone have to publish out a certain profile? Or does the Xoom have a list of device types that it knows are tetherable? I've read on another forum that it seemed like Motorola devices like the Droid worked whereas HTCs didn't seem to. I'm wondering if the Xoom detects the type of phone it's connecting to and decides whether it's tetherable or not... Anyone know? If this is the case maybe there's some file that can be tweaked on the Xoom to include additional devices or change the phone to broadcast out a different device name, etc. Maybe I should try changing my device name to 'Droid' or something.
Just guessing at this point....
I had the same issue with my droid, bluetooth tether is a pretty good alternative. I made a video of it, works with most phones with that create the Ad-Hoc. Check out video below to see the easy steps involved. Root on phone required.
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
rosso said:
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
Click to expand...
Click to collapse
I ran into a little bug, and it wouldn't recognize my droid. I had to unpair and turn on the bluetooth tether app. Then pair. The xoom then recognized the bluetooth tether. Hopefully this works, I apologize if it doesn't.
My wifi Xoom works perfectly paired with a CM7 Nexus One.
App: wireless tether
pd: key is the wrench
I tried renaming the bluetooth device name to 'Droid' but that didn't make a difference. I'm sure I'm following the same steps as in the video. Somehow the Xoom doesn't see the Hero as a Tetherable device...
Maybe there are some differences in Bluetooth chipsets?
Wifi tethering works with the Desire Z or the G2
I assume the network it creates is not an ad-hoc otherwise the xoom wouldn't have recognized it?
It's either not ad-hoc or you're using Bluetooth. You'd have to explicitly choose Bluetooth tethering in the Wireless Tether app so I assume you're using Wifi.
From what I understand some phones (the ones that are meant to be used as wifi hotspots) do broadcast in infrastructure mode rather than ad-hoc so I assume that's why it works for you.
Also of note is that Honeycomb only supports PAN tethering, and not DUN tethering.
Your phone also has to have "bluetooth tethering" turned on (however you do it, I don't have an android phone) so that the Xoom can discover the PAN bluetooth service.
Interesting. Something to read up more on. I'm using Wireless Tether to do the Bluetooth tethering but maybe I need something additional switched on. At least it's another direction to look at....
Seems like someone figured out how to get the Xoom to listen to Ad-hoc networks but that needs the Xoom rooted so I'll also research that. I prefer Bluetooth tethering since it uses less juice on the phone....
It does seem that "Wireless Tether" which is what I'm using on my HTC Hero, is running in PAN mode. If I look at the app's directory it has a pand executable, etc. and when I'm running the tether it is running pand in the process list.
Still, if I pair, even while it's running pand the Xoom still doesn't recognize it as tetherable. Grrr.... Wish I had another bluetooth client I could try to connect to see if it's the phone or the Xoom but I don't have anything else.
I'm wondering if it's because I have the Android 2.1 update for my Hero. Wireless Tether seems to support the 1.5 version of the Hero but doesn't mention 2.1. Maybe there is an incompatibility there...
Anyway, will continue to try to figure it out.
Rosso, your not on your own, I am still trying to figure this out on my hero running froydvillian. I have done the wifi ad hoc mod and thats working for me but BT tethering woudl be better, I will let you know If i ever find a solution.
I did see someone else loaded CM7 for the hero and then BT tether worked, but CM7 seems to have been pulled for the hero at the moment due to stability issues.
I have a droid eris (verizon's cdma hero) and I have the same exact problems but I'm on cm7and using wireless tether. I can get the to devices and connect via tethering but 5 seconds after that my phone reboots.
Just picked up a wifi-Xoom for my wife over the weekend. Tried to get it connected to my phone (HD2) as a wifi hotspot and was having problems (the ad-hoc problem). The xoom wouldn't even see the hotspot. I am running AmeriCanDroid 0413 build and it has wifi tether v. 3.0-pre11. So I switched back to winmo and still nothing, then I tried going to Darkstone SuperRam 1.5 (my fallback build). It has an older version of wifi tether, I think 2.06 or something like that and got the xoom to connect. I haven't had a lot of time to fool around with it, but it was able to get a network connection. Maybe you could try an older version of the wifi tether? I haven't experimented with the BT tethering yet. I don't want to root the xoom yet, maybe when my wife is tired of it.
/edit
Just checked the wifi-tether website and there is a new version of wifi tether and it supports softap which may help the xoom recognize the wifi hotspot.
Hi, I have just managed to get my hero bluetooth tethered to my htc hero.
The process I followed was basically what everyone has said:-
download wireless tether i am using 2.0.7
1. start bluetooth on phone and xoom (make discoverable)
2. Do not pair the devices yet
3. start up wireless tether, select bluetooth and tap to start the actual service
4. go back to bluetooth on your xoom and pair the devices
I then got an icon I had not had before and when I tapped the wrench I got the option to tether.
As for wifi tether your phone needs to put out infrastructure wifi for the xoom to see it, if its ad-hoc, you'll need to do the wifi mod so that he xoom sees adhoc
although as stated the new version of 'wifi tether' (which just seems to be the new name for the 'wireless tether' app) may fix that? but doesn't seem to support bluetooth as the 2.07 version does