Just got my adam today....
Been having issues with the accelerometer seems like eveything in games or apps that use the function wants to go to the right..no other holding place works.. just veers sharp right. then when I twist it at around it will go the other way but then back to right if I keep turning it ...
also when I hold it with my left hand only in landscape mode you see a spot of pressure on the screen push in as if my pointer finger in the back is pushin on the screen.
any one have any ideas.. already have wiped and tried again still no luck
The crazy part is the homescreen (launcher pro) always orients the proper way all the way around.. but maybe its a different sensor .. i dont know.
EDIT: I ran the program on my G2 and the blue points up to sky, the green points the right and the red is pointing in my direction...
If there is no way to reset the center in that accelerometer than I might just have to send it back.
Below is when the tablet is on a flat service.. if anyone else can run Z-device test to see what it should be that would be awesome.. i need to know if I need to fix this or send it back
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also here is a video of me use the "Swing Ball" app which shows that the balls swing straight up.
They move recklessly when I move the tablet around.
i've been having the same issue, and a little poking around has not yet yielded a fix. i'm still looking, but if anyone else finds anything, it would be great to know
colinjreed said:
i've been having the same issue, and a little poking around has not yet yielded a fix. i'm still looking, but if anyone else finds anything, it would be great to know
Click to expand...
Click to collapse
I ended up installing the utopia beta 1 rom . The games that didn't work before are working now...I think its a problem on eden roms
Related
Ok my screen works, alignment is whack because the CENTER of screen doesnt work. I have seen a few people have had same problem but saw no results that worked. so open invitation to those that are skilled.
KJAM with WM6
Problem: the exact center of the screen does not work, its about exactly 1 centimeter to each extreme. on screen alignment it takes about 10 tries to finally exit alignment mode, *i dont know if its tired of trying to align it, that it just gives up* but screen center still does not work. everything else is fine but it doesnt work.
Tested the problem: to see the exact affected area i went into notes with draw mode. i made tons of horizontal and vertical lines through the inner part of the screen to see which was th area that didnt work. and it looks like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By tdk_025 at 2008-01-24
efforts to fix:
HKLM>drivers>touch panel>pressure threshold (couldnt find the folder)
Hard Reset
moved stylus around screen
soft reset
landscape & portrait mode
keyboard open & keyboard close
safe mode
synced & un synced
I think i have tried most of what i could guess and what i have read in related threads but no luck.
I haven't flashed the rom because i have a latest one and it was fine at first when i upgraded to WM6 until about a month later.
so i am in mexico right now and easy to say that wizard parts & wizards are hard to get here so i am thinking of getting a new screen all together from the US, so before i spend 40 dollars, i am asking for help to you guys.
I hope yall can help me. thanks.
your touch scren or digitalaizer is bad, you should remplace it.
it happend to me and had to change the digitalizer. on ebay there is a lot of chinese users that deliver arownd the world
I was playing around with class based programming stuff, and the Diamond GSensor, and some physics (I'll pretend it's relevant to my A levels ) and wrote a little game to experiment...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What it is is a field of balls that are affected by gravity. If they collide, they should bounce off each other in a vaguely realistic way.
The number of balls can be adjusted via the up/down keys up to a maximum of 100 (the performance isn't great with that many though...)
The size of balls can be adjusted using the left/right buttons - there's no minimum or maximum size.
Hitting the centre button will pause everything.
You can click and drag the balls, and sometimes a "flick" makes them move, I need to fix that though.
Tilting the device will accelerate all the balls.
The colour and position of each ball is random.
Should work on Diamond, Raphael, Blackstone, Rhodium and Topaz.
This isn't meant to have a real reason, it's just something fun and physicsy!
Changelog:
0.7 - fixes a touch screen related bug...
0.6 - reduces sensor polling time making it more reliable, some graphical speed ups as well.
0.5 Initial public release
Looks good.. Let me try this..
This is a pretty fun and simple game! Would u consider open sourcing it?
gobmonster said:
This is a pretty fun and simple game! Would u consider open sourcing it?
Click to expand...
Click to collapse
I probably will when I've cleaned up the code and tried to make it faster...
New release fixes a few things...
Get it from the first post.
hey i was wondering if you still have the source code for this?
I'm looking for something to get of started on programming apps for my diamond and its sensors... and this seems to be a pretty cool place to start as i have a few ideas of how this could be improved..
Thanks,
-David
Seems to have got lost *kicks to the top*
Not being able to find a car-holder that would hold my Touch Pro in widescreen
with the keyboard extended firmly and still allow for a power-cable,
I designed this car-holder.
It ataches to anything that can carry a camera (1/4") and to the slide-in car.holders
from HAMA (they sell suction cups, air-hole -attachments, glue-ons and screw-ons).
You can attach the supplied and wider third-party cabless, reach the power-button
and it even comes with a hole to keep yout touch-pen.
If anyone wants one of these,
I can print them for 35eur+postage on my 3D-printer.
Marcus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
attached to a digicam-holder:
attached to a HAMA-holder:
very bad photo of it in my car:
Any chance I could get the .stl file? I'd like to use it with my schools 3D printer.
codyfurr said:
Any chance I could get the .stl file? I'd like to use it with my schools 3D printer.
Click to expand...
Click to collapse
You don´t seem to have that printer for a long time yet to not know http://www.thingiverse.com/
It´s the first place to look for the STL-files of things ment to be printed.
Didn't think to look there. I thought you would've posted a link in here, but oh well.
Thanks!
IGES or STEP
Hi, is it possible to get a IGES or STEP File from you. I want to make one at Work, but from aluminum, with a CNC Mill.
My CAD/CAM Software takes STL files, but import of STL is not the best. It works better with IGES or STEP.
At the moment I am working on a Desktop Dokingstation, its not ready but will be in a short period of time. Will post it here.
Like this?
http://www.thingiverse.com/thing:2195
It´s the original Alibre Design files.
With milling you´d have to work very deep in the material without your toolhead touching the sides
and you certainly have to run multiple faces. I don´t think that will work well.
I´m using my Touch Pro only for development now that I switched to the Nexus One.
I have to say that it pretty cool stuff. Nice work Marcus. What cool times we live in when you can design and fab your own accessories for your phone. Thanks for sharing.
Hello everyone, i have a question which i cant find a real answer . Last night when i was on fb messenger , a strange blue spot appeared in left coner , on curved display.My first thought was i have a display problem because is a new phone and i was worried. I get out from app ( not closed ) , the spot was gone.I came back in app , the spot appeared again . Finally i closed and the spot is gone forever. I am interesed what was that , i search on google and i find can be some notification or something like that , but nothing clear. Well , i am curios what is that drop , if my display has some problems, and how the i can make to appear again . Here a photo wich i found on google similar like my spot , but is was somehow above and was in facebook messenger
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's not a hardware problem if it appears on screenshot, so don't worry about that. Maybe it was a facebook related bug.
I've had this happen to me before. That blue thing is the little handlebar that appears when you highlight text. There's a bug where it'll appear in the corner of your screen for some reason.
It's a Messenger bug! Try to close it & it'll disappear ?
It disappears when you optimize your S7! I want to believe that it's a cute way Android is using to tell us that the device isn't 100% optimized. It kinda looks like a water droplet. Maybe meant to look like a sweat drop? I dunno. But optimizing or restarting the phone will make it go away
I have the same thing and I was not in Facebook at all when it popped up I was in snapchat and it just popped up when I hit the home button its only on the home screen and you can move it maybe a 1/8th inch and it will go back when you finger is no longer touching the screen I'm on 7.0 and its a at&t galaxy s7 not the edge the normal one
Hi,
does anyone encounter this bootloader exception that has pure red letters (no greens like others) and any combination like Vol - plus home plus power ain't working and other key combination?
I also drained the battery and after plugging in, the bootloader exception just appears with other text but still pure red letters, still no response.
I cannot flash anything because I cannot enter download mode. Is there any way which I can do? Please see below for the reference picture.
(I have posted a new thread since the other thread has access on download mode and everything)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Carl
I just experienced the same issue yesterday. Seems to be different than other ones that i've been able to find but its exactly like yours. Have you had any luck since you posted this?
jd8108 said:
I just experienced the same issue yesterday. Seems to be different than other ones that i've been able to find but its exactly like yours. Have you had any luck since you posted this?
Click to expand...
Click to collapse
None. I went to service center and they said Main board has to be changed But I'm going to try some luck tomorrow to fix with the cheaper guys who will try to reprogram and will open the back to do some stuff. wish me luck
Any NEWS??
I have the same problem, but with i little different error error codes. Phone not responding whatever i press.
Damm, mine did this last night, i guess all contacts and everything is lost now
So, i just got the phone from warranty service and they replaced motherboard, so it means that this was hardware problem.
carljasoncrx said:
None. I went to service center and they said Main board has to be changed But I'm going to try some luck tomorrow to fix with the cheaper guys who will try to reprogram and will open the back to do some stuff. wish me luck
Click to expand...
Click to collapse
Any Update on this?
(i had same issue now please guide me )