Related
After reading many posts about not being able to the XDA App with JIT enabled… I decided to post this…
Here’s something I happened to “stumble” upon while playing around with ROMs with JIT-enabled. Hopefully this will help some others enjoy the XDA/Tapatalk App from their phones with JIT-enabled
I have done this on two (2) Cyanogen based ROMs (CELB2.4 and CE1.1). Both had JIT enabled by default.
In any case, I love being able to use the XDA App from my phone to feed my addiction However, I also enjoy having JIT and the goodness that comes along with it! So… I was playing with CELB2.4 and testing some battery life. After disabling JIT, I instantly started up XDA (as I was unable to use due to FC’s with JIT enabled). I logged in and browsed around. However, disabling JIT had no effect on my battery life, so I decided to re-enable. Later, without thinking, I started up XDA and browsed around some more. It didn’t hit me until a few minutes later that JIT was enabled and I was able to use XDA.
In any case, I loaded up a NAND of CE1.1 and did the same thing, with the same result. XDA app worked perfectly… and I’m still getting over 5.3 mflops
I think there are other apps that have issues with JIT, however, I personally don’t use them. Hope this helps others! Would love to know what ROMs this “trick” works with, and/or which it doesn’t.
------------------------------------------------------------------------------------
I highly recommend doing a NAND backup before doing anything. It's just good practice!
There are a few methods to enable/disable JIT... here's what I did (using a Windows machine):
Disable JIT via adb:
adb remount
abd pull /system/build.prop build.prop
Open build.prop in Notepad/Wordpad or favorite text editor (file will be in the working directory)
find the line:
dalvik.vm.execution-mode=int:jit
replace with:
dalvik.vm.execution-mode=int:fast
SAVE
adb push build.prop /system/
Reboot Phone
------------------------------------------------------------------------------------
After disabling JIT, reboot, open up XDA App, login and browse around (as a side note, I created a favorite to the Eris Forums). Then, close out of XDA App, and then re-enable JIT and reboot.
------------------------------------------------------------------------------------
Enable JIT via adb:
adb remount
abd pull /system/build.prop build.prop
Open build.prop in Notepad/Wordpad or favorite text editor (file will be in working directory)
find the line:
dalvik.vm.execution-mode=int:fast
replace with:
dalvik.vm.execution-mode=int:jit
SAVE
adb push build.prop /system/
Reboot Phone
------------------------------------------------------------------------------------
Alternatively you can also use a program like Root Explorer to find the build.prop file in the /system/ folder and edit/save/reboot.
Again, would love to know the results this has for others!
------------------------------------------------------------------------------------
Thanks to a post from thenestor, it's been discovered that version 0.9 of the XDA/Tapatalk app works just fine with JIT (regardless if an AOSP or other ROM). I'm currently using version 0.9 on xtrROM and it works great. I have attached the zip with the 0.9 apk. It has a "funky" name... and I didn't rename... I simply used Astro to install the apk. works great!
MODS: if for any reason I am NOT allowed to have version 0.9 posted, please let me know, and I will take the attachment down ASAP.
I vote for a toggle app/widget
Root Explorer
It works! Used root explorer...nor really that hard to do. Thanks for sharing your discovery.
didnt work with Aloysius v12. Oh well.
paintguy said:
It works! Used root explorer...nor really that hard to do. Thanks for sharing your discovery.
Click to expand...
Click to collapse
which ROM where you using?
I have not had time to try on my ROM but would love to know if it is a viable work around to try and incorporate...
zach.xtr said:
which ROM where you using?
I have not had time to try on my ROM but would love to know if it is a viable work around to try and incorporate...
Click to expand...
Click to collapse
I was using Eris Lightening Bolt 2.5.
When I loaded the app the first time on my ELB install, it crashed. However, I reloaded it straight away and it worked. I did not disable JIT or do anything else to make it work, just restarted the app. It hasn't crashed since. I have, however, had it sit and spin on "Processing".
Didn't work on latest ErisLightningBolt 1.4.
1. XDA didn't work w/stock config.
2. Changed int:jit to int:fast.
3. Rebooted.
4. XDA worked! Signed in, created some favorites.
5. Changed int:fast back to int:jit.
6. Rebooted.
7. XDA FCs.
I can confirm that it works.
Eris Lightning Bold 2.5
Thanks!
Disable JIT via adb:
adb remount
abd pull /system/build.prop build.prop
------------------------------------------------------------------------------------
Enable JIT via adb:
adb remount
abd pull /system/build.prop build.prop
Open build.prop in Notepad/Wordpad or favorite text editor (file will be in working directory)
find the line:
dalvik.vm.execution-mode=int:fast
replace with:
dalvik.vm.execution-mode=int:jit
SAVE
adb push build.prop /system/
Reboot Phone
------------------------------------------------------------------------------------
Click to expand...
Click to collapse
I'm running CM:E 1.1, and can't seem to find how to disable jit. Framework43's rom. I miss my xda time saver tapatalk. If anyone can help. I would appreciate it, greatly. Thank you much.
Re: [Workaround] XDA/Tapatalk App - JIT
From my testing seem to work only for AOSP based builds. .. must be something in the HTC framework causing interference
-------------------------------------
Sent via the XDA Tapatalk App
zach.xtr said:
From my testing seem to work only for AOSP based builds. .. must be something in the HTC framework causing interference
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Thank you for the response. Ill message framework43 about it to see if he can help me further into this issue of mine.
Confirm Also
I confirm that this worked on CELB v2.5
Turnyface said:
I can confirm that it works.
Eris Lightning Bold 2.5
Thanks!
Click to expand...
Click to collapse
Re: [Workaround] XDA/Tapatalk App - JIT
@zach.xtr
I found out that all I had to do was add the string to build.prop
I followed a POST on "Jcase's Universal JIT Update"
I added these two strings at the bottom of build.prop
dalvik.vm.execution-mode=int:fast
dalvik.vm.heapsize=38m
That fixed the issue with xda tapatalk closing randomly. I still have yet to re-enable "jit" to see if the workaround works.
Thank you for the help and replies.
-------------------------------------
Sent via the XDA Tapatalk App
Edit: I can confirm that the work around does NOT work on CyanogenEris v1.1 (jit enabled)
(Above shows what to add if missing.)
P.S.
It did NOT work for me, can't confirm it overall.
@someone who can help.
How would I go about fixing the market issues?
Can't install apps, I can only push the ones I have backed up.
jetmclean said:
I confirm that this worked on CELB v2.5
Click to expand...
Click to collapse
I can confirm this as well
If you don't want to disable JIT, or if you're on a ROM where disabling and re-enabling doesn't work, just downgrade to "xda-developers app v0.9" (not sure which version of the real Tapatalk) and it works with JIT.
is 0.9 a google apk search?
have a link?
sweet! found it! much like thenestor, i had to find it using some "crafty" methods! lacks some of the "favorites" w/sub-forums... but works VERY nicely with JIT.
thanks for the tip thenestor... good stuff!
if i'm allowed to post 0.9 version, i will gladly do so! (nothing wrong with it, i hope?).
tenzomonk said:
sweet! found it! much like thenestor, i had to find it using some "crafty" methods! lacks some of the "favorites" w/sub-forums... but works VERY nicely with JIT.
thanks for the tip thenestor... good stuff!
if i'm allowed to post 0.9 version, i will gladly do so! (nothing wrong with it, i hope?).
Click to expand...
Click to collapse
Can you share some of the craft involved in finding this? Thanks!!
Cary
Re: [Workaround] XDA/Tapatalk App - JIT
@zach.xtr
I found out that all I had to do was add the string to build.prop
I followed a POST on "Jcase's Universal JIT Update"
I added these two strings at the bottom of build.prop
dalvik.vm.execution-mode=int:fast
dalvik.vm.heapsize=38m
That fixed the issue with xda tapatalk closing randomly. I still have yet to re-enable "jit" to see if the workaround works.
Thank you for the help and replies.
-------------------------------------
Sent via the XDA Tapatalk App
Edit: I can confirm that the work around does NOT work on CyanogenEris v1.1 (jit enabled)
(Above shows what to add if missing.)
P.S.
It did NOT work for me, can't confirm it overall.
@someone who can help.
How would I go about fixing the market issues?
Can't install apps, I can only push the ones I have backed up.
Click to expand...
Click to collapse
Thanks for this! I can confirm it works on white widow 3.2. I play toss it quite a bit so downgrading xda wasn't a
complete fix for me.
-------------------------------------
Sent via the XDA Tapatalk App
Of course there are already threads on xda, but i thought it would be nice to put one under windows 8 thread.
Here are other threads:
BlueStacks android on windows out now !!
BlueStacks: Android Apps on PC
Bluestacks Android on Emulator Alpha release
[Q] How to run multipple apps/windows simultaneously
Whats this in an Apple Mac (Linux and Mac users users chmod +x run.sh and run it)
And, here is the software to download. If you look closely they are also developing a mac edition. Enjoy!
Bob Smith42 said:
Of course there are already threads on xda, but i thought it would be nice to put one under windows 8 thread.
Here are other threads:
BlueStacks android on windows out now !!
BlueStacks: Android Apps on PC
Bluestacks Android on Emulator Alpha release
[Q] How to run multipple apps/windows simultaneously
Whats this in an Apple Mac (Linux and Mac users users chmod +x run.sh and run it)
And, here is the software to download. If you look closely they are also developing a mac edition. Enjoy!
Click to expand...
Click to collapse
Has someone already tried it?
Is it any good?
domenukk said:
Has someone already tried it?
Is it any good?
Click to expand...
Click to collapse
Look here
http://forum.xda-developers.com/showthread.php?t=1298332
Sent from my Dream/Sapphire using xda premium
Im having a hell of a time figuring out how to configure git in Ubuntu 11.10. I am very new to the Linux environment and was wondering if someone could help me get my foot in the door and at least get the my work environment set up properly and the proper source code downloaded. Im really only interested in modifying the kernel so if you can help me set up and understand whats going on Id be greatly appreciative.
Thanks...
oh dude dont even get me started on linux ive literally just spent the past 2hrs trying to get flash to work on kubuntu i got so pissed i uninstalled and am switching back to ubu as we speak lol. ubuntu should have an irc help channel i know xubuntu did when i was playing around with it.
i just looked and there channel is #ubuntu
huzza!!!!!!!!!!!!!!!!! freakin a i finally got flash to work properly on kde shell i completly uninsulated kubuntu installed ubuntu downloaded flash from adobe not from the software center then put it in mozilla/ plugins folder and reinstalled kde on ubuntus terminal and all my settings stook. sorry for the rambling but yall have no idea of how stoked i am im probably going to make kde my default desktop now lol
I'm just having trouble getting ADB to recognize my phone. Also it seems Samsung didn't include a config file for the kernel to add things like overclocking etc.. Unless its hidden somewhere else?
Sent from my SCH-I400 using XDA
jaizero said:
I'm just having trouble getting ADB to recognize my phone. Also it seems Samsung didn't include a config file for the kernel to add things like overclocking etc.. Unless its hidden somewhere else?
Sent from my SCH-I400 using XDA
Click to expand...
Click to collapse
U building from source?
Sent from my SCH-I400 using xda premium
I have the source just not too sure how to utilize it in Ubuntu, like I said I'm learning as I go. I tried doing an adb pull from my phone for the config file in windows and I get the error "file or directory does not exist" however it did work when I tried it with my Acer A500...
Is there a config.gz included in the source somewhere? I've been reading about something called defconfig but there are numerous references to that within the source.
If I can find that file I feel like building our own kernel would be infinitely easier... Maybe I'm too optimistic..
i actually recocmend installing linux mint first a lot more stuff works out of the box with it but if you like unity just search for ubuntu in the software manager and u can install it over mint.
Just as an FYI, you are likely not going to be able to use Ubuntu 11.10 to build the Continuum kernel. You'll need to use either 10.04 (LTS) or 10.10 to get the proper build tools. Also, getting git to work should be as simple as installing it. I believe it is under git-core or similar. You should have a look at the page for setting up a build environment for AOSP on what to install and such, as it is a pretty good starting point.
Minty Fresh
I tried installing Mint over Unity with no success. All of the other desktop environments work, but not Mint. I wonders why.
u need to install the mint live cd first then one youve got everything update install ubuntu u can search for it in the package manage or get it in terminal
i believe the command is sudo apt-get ubuntu-desktop
Bierce22 said:
u need to install the mint live cd first then one youve got everything update install ubuntu u can search for it in the package manage or get it in terminal
i believe the command is sudo apt-get ubuntu-desktop
Click to expand...
Click to collapse
Will this erase windows like you too? Jk
Sent from my SCH-I400 using xda premium
10chr
Bierce22 said:
10chr
Click to expand...
Click to collapse
Cheer up chuck. I was just pwaying
Sent from my SCH-I400 using xda premium
Found this today. Came out today lol
http://rootzwiki.com/_/articles/the...or-setting-up-adb-and-transferring-files-r592
Sent from my SCH-I400 using xda premium
Anyone know what defconfig the Continuum uses? There are about 100 different defconfigs within the kernel source. Does the Continuum have a codename or something?
P.S. everything seems to be working fine in Ubuntu 11.10.
jaizero said:
Anyone know what defconfig the Continuum uses? There are about 100 different defconfigs within the kernel source. Does the Continuum have a codename or something?
P.S. everything seems to be working fine in Ubuntu 11.10.
Click to expand...
Click to collapse
Not sure., you might check the fascinate forums. I'd bet its the same.
Sent from my SCH-I400 using Tapatalk 2
jaizero said:
Anyone know what defconfig the Continuum uses? There are about 100 different defconfigs within the kernel source. Does the Continuum have a codename or something?
P.S. everything seems to be working fine in Ubuntu 11.10.
Click to expand...
Click to collapse
It should be listed in the readme with the source, but it should be something like "garnett_defconfig"
Hello everyone!
First of all, I am posting here as I am not able to post in the Development Forum. If a moderator sees this fit could he/she please move this thread to the Development forum.
This is a mod to Siyah's Kernel which allows Dual Booting.
Currently you are unable to share apps between your two ROM's and to me that is really annoying.
WELL, after much research and testing I have devised a script to allow sharing of apps between ROM's.
WARNING: Should only be used on freshly flashed 2nd ROM's otherwise you will lose all your downloaded apps for your 2nd ROM!!!
They way this works is to mount the data from your 1st ROM in your 2nd ROM, then symbolic link the app folder.
Now for all you people that are going to nag saying it has issues, stop it! If it has issues fix it yourself! I tested this on Omega ROM and ParanoidAndroid and it works fine.
First go through the process of flashing your 2nd ROM. Once that is completely boot into your 1st ROM again and download the attached file and extract its contents to "/data/media" otherwise known as the root of your internal SD Card.
Once completed, reboot into your 2nd ROM and download/open your Terminal app and type in the following commands
(lines starting with # are comments so don't type those into your terminal, also hit enter at the end of each line):
Code:
# Escalate to root (hit grant if a dialog pops up)
su
# Remount the system so you can write to it
mount -o rw,remount /system
# Now copy the file from your SD Card to /system/etc/init.d
cp /data/media/01userinit.sh /system/etc/init.d/01userinit.sh
# Change working directory to /system/etc/init.d
cd /system/etc/init.d
# Rename the 01userinit.sh to 01userinit
# If 01 is already used then choose the next lowest number e.g. 01banner so choose 02
rename 01userinit.sh 01userinit
# Change permissions just to make sure (remember to use your number if you changed the 01 part)
chmod 771 01userinit
After doing this close the terminal and reboot the phone into the 2nd ROM again. This time it should take a little longer and might say its upgrading a few apps.
This is largely untested so there is no guarantee it will work.
WARNING!!!! MUST READ THIS WARNING!!!!
Uninstalling an application from either ROM WILL uninstall it from the other ROM as well!!!
You are sharing apps directly, no mimics or anything!!!
Thanks for reading! Feedback is much appreciated, if there are issues I will be glad to listen and see if I can fix them but I make no promises. :silly:
charsleysa said:
Hello everyone!
First of all, I am posting here as I am not able to post in the Development Forum. If a moderator sees this fit could he/she please move this thread to the Development forum.
***deleted**
Thanks for reading! Feedback is much appreciated, if there are issues I will be glad to listen and see if I can fix them but I make no promises. :silly:
Click to expand...
Click to collapse
Good work keep it up!
Exactly what I was looking for! Will try this when I'm home, will give feedback then! Thanks
Sent from my GT-I9300 using xda app-developers app
Good works.
this method run with the contact and message also???
very thanks for this.
I will try.
gazou_hb said:
Good works.
this method run with the contact and message also???
very thanks for this.
I will try.
Click to expand...
Click to collapse
This script won't do that. I can create a script to do that if I have time but first I need to work on assignments.
Looks like good work, will give it a go later and/maybe congratulations
Sent from my GT-I9300 using xda premium
I try this with Samsung ROM xxdlib ans cm10 ROM. All application have present.
Your method and file work perfectly.
I thinks that it's better to make a recoevry install for easy method. If it's possible.
Good works.
Sorry for my bad english.
For my request concerning the same method for the contact and messages (SMS) talk me when i test...
Sent from my GT-I9300 using xda premium
Nice mod! It is worth noting that the script only links the apps (APKs) between ROMs. It does not link the data (databases/preferences) used by these apps.
I'm trying to link the sms messages across ROMs but the db seems to be different between Samsung and CM ROMs. I would like to see what would you do here
Sent from my GT-I9300 using Tapatalk 2
I would like to have the data linked to, any way to do that?
Sent from my GT-I9300 using xda app-developers app
lightning18 said:
Nice mod! It is worth noting that the script only links the apps (APKs) between ROMs. It does not link the data (databases/preferences) used by these apps.
I'm trying to link the sms messages across ROMs but the db seems to be different between Samsung and CM ROMs. I would like to see what would you do here
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I just tried linking contacts, sms and calendar and I managed to corrupt my entire 2nd ROM so I don't think it's possible without providing a 3rd app to run in the background.
Interesting, will give it a try
Great! Just waiting to full sync between ROMS
I love the concept but cannot get this to work. No matter what I do it won't work
Drew071
Sent from my GT-I9300 using xda app-developers app
it is not working... initially the app dir was loaded as /data/app/app tweaked the script to load the app directory ( dataapp ) .. still i am not able to see the apps in the launcher .. .
drew071 said:
I love the concept but cannot get this to work. No matter what I do it won't work
Drew071
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
smartvinu said:
it is not working... initially the app dir was loaded as /data/app/app tweaked the script to load the app directory ( dataapp ) .. still i am not able to see the apps in the launcher .. .
Click to expand...
Click to collapse
Could you please tell me what ROM's you are using and whether or not they are fresh installs.
Just tried this with Omega v28 and PA 2.2 as 2nd, didn't work but not a fresh install. I'm swapping then backing up PA to try again now and see if it works.
Edit: Just formatted 2nd rom and reinstalled as per OP's instructions and it worked. So that's the key I guess Awesome work OP!!
Tried this and didn't work, tried numerous times.
1st ROM: Paranoid
2nd ROM: Omega 28 (did a fresh install)
Does not show any of my apps in omega ROM from paranoid ROM.
I did encounter a problem in the terminal stage, on the moving file part its says can not find the file, I have to do it manually.
Sent from my GT-I9300 using xda app-developers app
jayc1980 said:
Tried this and didn't work, tried numerous times.
1st ROM: Paranoid
2nd ROM: Omega 28 (did a fresh install)
Does not show any of my apps in omega ROM from paranoid ROM.
I did encounter a problem in the terminal stage, on the moving file part its says can not find the file, I have to do it manually.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Perhaps it's related to that? Make sure you put it in the right spot and have the permissions right.
Sent from my GT-I9300 using xda premium
Its very strange, all else seems fine.
Just that one error, all else is fine. Moved to the location stated but still nothing??
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 07:10 PM ---------- Previous post was at 06:57 PM ----------
If I set the permissions manually what's the correct set up, currently it's:
These parts are ticked -
User: read, write, execute
Group: read, write, execute
Other: execute
jayc1980 said:
Its very strange, all else seems fine.
Just that one error, all else is fine. Moved to the location stated but still nothing??
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 07:10 PM ---------- Previous post was at 06:57 PM ----------
If I set the permissions manually what's the correct set up, currently it's:
These parts are ticked -
User: read, write, execute
Group: read, write, execute
Other: execute
Click to expand...
Click to collapse
Yeah the permissions are the same as mine. Hmm bit weird
Sent from my GT-I9300 using xda premium
Hey guys I know I have posted some other similar programs, but hopefully this will raise the bar on how people use Android Debug Bridge.
So To start off, this program will not root any phone, but can easily break a phone if used improperly.
Secondly, If you need to ask what a button in the program THEN DO NOT USE IT!
I will only answer questions if they involve drivers or programming bugs, NOT for something like "What is Sync?" because If you do not know, then you do not need to know now.
SEE LINKS BELOW FOR MORE RECENT UPDATES!
This program has some built in ADB functions:
Rebooting- Recovery/Bootloader/Fastboot.
Sync from a folder (If you don't know or have to ask do not use!)
Use logcat
Start up a shell instance (With root if possible.)
Remount (Needs root also)
Flash(Recovery/Boot.img)
Root SOME devices(Using Bin4ry Script Credit to him)
Auto Download Root script
adb shell built in now
cmd shell built in
automatic updates
push files
install apks
get misc system information
Download ODIN for Samsung devices
Detect HTC device correctly for once lol
Application Manager
ADB Learning Center (Under Construction but not beta)
4.0-4.3 Backup Manager (Using adb backup NOT Nandroid)
0Nandroid intergration
Build.PROP veiwer (Soon to be editor too!)
Free device ram and kill background process
MORE TO COME!
___________________________________________________________________
Also a BIG thing for this program is the ability to install ADB and Fastboot into Windows as a command in Command Prompt.
This would allow one to use adb as a normal command from CMD.
E.G "C:\Users\Lab\>adb shell"
Instead of having to CD to C:\android\and all that.
Download the program: Version 5.0.2.26:New Download link[/COLOR]
As far as the newest huge feature in ADBGUI goes, the Application Manager is to be considered Pre-beta and should be used with extreme caution.
Requirements for the Application Manager:
> You need root
> It only works with 3rd Party (Downloaded from google play or other source)
> It does not work with all devices and has some major bugs.
Come on guys give some feed back!
Well enjoy!
Have questions or maybe want to report an issue?
Check out my Discussions Forum here otherwise you can post here at XDA Forums
About ClickOnce:
The core principle of ClickOnce is to ease the deployment of Windows applications. In addition, ClickOnce aims to solve three other problems with conventional deployment models: the difficulty in updating a deployed application, the impact of an application on the user's computer, and the need for administrator permissions to install applications.
ClickOnce-deployed applications are considered 'low impact', in that they are installed per-user, not per-machine. No administrator privileges are required to install one of these applications. Each ClickOnce application is isolated from the other. This means one ClickOnce application is not able to 'break' another. ClickOnce employs Code Access Security (CAS) to ensure that system functions cannot be called by a ClickOnce application from the web, ensuring the security of data and the client system in general.
Some other thinks about ClickOnce:
My ClickOnce application is personally signed, so windows will tell you the publisher is "Unknown" but that is OK. It will install just fine.
[UPDATE Nov. 21st 2013]
Hey guys!!
Just wanted to share some news for all you linux users!
I will be starting a linux conversion for ADBGUI to be fully compatible with Ubuntu/Debian/Arch Linux Distros!
Details: Click Here!
Looks great! Will try as quickly as possible.
Sent from my U20i using xda app-developers app
Is this ADB GUI project open source?
I think this is a really cool idea. Might also help get more users into ADB and willing to learn what things do. (sometimes it's scary when thinking of command line)
Shifted from the bottom of the rabbit hole
thronnos said:
Is this ADB GUI project open source?
I think this is a really cool idea. Might also help get more users into ADB and willing to learn what things do. (sometimes it's scary when thinking of command line)
Shifted from the bottom of the rabbit hole
Click to expand...
Click to collapse
I will be posting the source on github but it is written in VB.NET. I am also happy to answer questions about the source code.
Required program for the source is
visual studio 2012.
Sent from my SCH-R530U using xda premium
Just updated to version 2
Read about it at urgero.org/node/5
Sent from my SCH-R530U using xda premium
Hey guys!!
Just fixed a bug in ADBGUI about a file not found.
Download Fix
Can also be found Here
Fixed bug with version 2.1:
Would still try to download, even if you selected no.
and added Android Device Discovery
currently working on adding an option to browse sd card and to get device information and battery levels.
Tonight around 11pm central time I will be uploading the source code for this project.
Sent from my SCH-R530U using xda premium
UPDATE:
Check out the new updates at http://urgero.org/node/5!!
Added rooting scripts!!
With downloader (No need to hunt down the scripts!!)
Just updated to 2.4!
added:
Automatic updates!!
Over 400 dpwnloads and no one has anything to comment about?
Sent from my SCH-R530U using xda premium
sandix said:
Over 400 dpwnloads and no one has anything to comment about?
Sent from my SCH-R530U using xda premium
Click to expand...
Click to collapse
Sorry, bro, I thought the same after releasing my first few works... Sadly, that how it seems to be.
To the tool: I think its awesome, haven't had any problems so far. Don't give up!
Sent from my U20i using xda app-developers app
Thank you!
Does anyone have any feature requests?
Sent from my SCH-R530U using xda premium
Just Updated to V2.6:
Added F-Droid for all you Open Source fans!
Also fixed a bug where applications would not install correctly for some devices(Still does not fix all of them)
Download: http://urgero.org/node/5
If you already have 2.4 or higher, just launch the program as administrator and it will prompt you to update, otherwise download 2.4 aat the link above to upgrade to 2.6!
sandix said:
Thank you!
Does anyone have any feature requests?
Sent from my SCH-R530U using xda premium
Click to expand...
Click to collapse
Can you add a file manager to see from your tool all the folders and modify them and files
Inviato dal mio GT-I9070 con Tapatalk 2
I am currently in the process of doing so yes.
Sent from my SCH-R530U using xda premium
Does not work on mine. Dont know why.
it says: "is not valid s Win32."
Please help.
i have winxp 32 bit.
Make sure you run as administrator and that all the files are extracted from the archive. Also make sure they are all in the same folder.
If you could post a screenshot that would be great help
Sent from my SCH-R530U using xda premium
mr_itou said:
Does not work on mine. Dont know why.
it says: "is not valid s Win32."
Please help.
i have winxp 32 bit.
Click to expand...
Click to collapse
I for got to add:
You NEED .NET Framework 4.5, download from microsoft here