Related
is it possible to switch to another custom recovery after I already got clockworks?
I tried unrevoked but its stuck in the reboot (I believe its trying to root my aria again)
not sure what youre trying to do.... i believe Clockwork is the only Recovery for rooted phones. if you want to flash a custom ROM, well that is something else altogether. please be specific as to what you want to flash to the phone. include a link to the flash too
I was trying to flash psfreedom recovery rom from here
http://psfreedom.com/wiki/HTC_Aria
I believe the method on that website was for unrooted arias without clockworks
zyo said:
is it possible to switch to another custom recovery after I already got clockworks?
I tried unrevoked but its stuck in the reboot (I believe its trying to root my aria again)
Click to expand...
Click to collapse
To flash a different custom recovery on your Aria, you need to rename the zip file LIBEIMG.ZIP on the SD card and boot in HBOOT (Power on the phone by holding down VOL DOWN and the Power Button). When it boots to the HBOOT screen you should see text stating that it found LIBEIMG.ZIP and is installing it.
awesome. now before I go ahead, is there any clockworkx recovery image I can revert back to?
zyo said:
awesome. now before I go ahead, is there any clockworkx recovery image I can revert back to?
Click to expand...
Click to collapse
I'm curious, what recovery are you talking about?
thanks for including the link. the instructions are clear.... Root IS required, Clockwork recovery is recommended, the Freedom Aria flash appears to be a custom ROM.
once the phone is Rooted, boot into Recovery, make a Nandroid backup, and flash downloaded zip file from SD card.
if you need help Rooting, there is all sorts of good methods available on this site. I use the Unrevoked method myself, but it works best on Linux or Mac OS
zedbra said:
thanks for including the link. the instructions are clear.... Root IS required, Clockwork recovery is recommended, the Freedom Aria flash appears to be a custom ROM.
once the phone is Rooted, boot into Recovery, make a Nandroid backup, and flash downloaded zip file from SD card.
if you need help Rooting, there is all sorts of good methods available on this site. I use the Unrevoked method myself, but it works best on Linux or Mac OS
Click to expand...
Click to collapse
hmm I think you are looking at the old method which is a custom rom
The new one is a custom recovery which brings me to the question as I dont think you can flash a custom recovery in the clockwork custom recovery.
its possible im looking at the wrong thing, but far as i can tell it states "Recovery Custom ROM" which is totally different from Custom Recovery ROM
From link posted above:
"Update can be installed in recovery mode in Psfreedom settings menu via Update (local) or Update (net) if you have configured your wifi connection. Put the file on your SDCARD and install it.
Download Recovery custom rom : http://alephzain.klutsh.com/aria-recovery.tgz "
tpbklake said:
To flash a different custom recovery on your Aria, you need to rename the zip file LIBEIMG.ZIP on the SD card and boot in HBOOT (Power on the phone by holding down VOL DOWN and the Power Button). When it boots to the HBOOT screen you should see text stating that it found LIBEIMG.ZIP and is installing it.
Click to expand...
Click to collapse
I have similar questions. I was trying to update my version of clockwork also using unrevoked again, but couldn't get it to work. I guess my questions are:
1. Is there any benefit in updating to a newer version of clockwork? My current version is 2.0.x.x and I believe the latest one is 2.5.0.4.
2. Will this same method work to do so? Can I rename the latest clockwork .zip file like this and get it updated?
I thought using the flash clockwork option in ROM Manager would do it, but it doesn't. If I reboot from ROM Manager it goes to the newer version, but if I reboot otherwise it goes to my original. The couple times I've used it, there appears to be maybe some different features/options in the newer one and I feel like I might be missing out on something!
What's the difference with this recovery?
Sent from my Liberty using XDA App
zedbra said:
its possible im looking at the wrong thing, but far as i can tell it states "Recovery Custom ROM" which is totally different from Custom Recovery ROM
From link posted above:
"Update can be installed in recovery mode in Psfreedom settings menu via Update (local) or Update (net) if you have configured your wifi connection. Put the file on your SDCARD and install it.
Download Recovery custom rom : http://alephzain.klutsh.com/aria-recovery.tgz "
Click to expand...
Click to collapse
These are probably two different things. once you got the recovery rom flashed you can upgrade it in recovery mode (hence its different from original clockwork recovery)
Ok bro, I didn't see much info about it so I'm gonna take your word for it.
@brswattt, far as I can tell this is " basically" used for jailbreaking the ps3.
@armyengineer;
you can use unrEVOked to flash the new recovery. if youre a Windows user, download the unrEVOked tool and run the .exe as Administrator. also make sure there are no conflicting s/w on the PC such as HTC Sync and you have all the drivers installed(HBoot, ADB drivers, etc.)
for more info about the PSFreedom Recovery, check out THIS Thread HERE
unrevoked keeps giving me
couldnt find misc
error, is there any other way to flash a recovery?
zedbra said:
@armyengineer;
you can use unrEVOked to flash the new recovery. if youre a Windows user, download the unrEVOked tool and run the .exe as Administrator. also make sure there are no conflicting s/w on the PC such as HTC Sync and you have all the drivers installed(HBoot, ADB drivers, etc.)
Click to expand...
Click to collapse
This still isn't working for me. Everything appears to go well at the start, then I get:
Waiting for root...(safe to restart if this doesn't work)
At which point the only way I can restart is to pull my battery. After doing so, it reboots and I get:
This was a triumph
It is not, however, any such thing. After another minute I get this:
Internal error: couldn't find misc.
So I've still got my original version of clockwork, 2.0.1.3, despite the fact that ROM Manager is telling me I have 2.5.0.1. I'm obviously missing something here.
BTW, if it matters I'm running CM 6.1.0
armyengineer51 said:
I have similar questions. I was trying to update my version of clockwork also using unrevoked again, but couldn't get it to work. I guess my questions are:
1. Is there any benefit in updating to a newer version of clockwork? My current version is 2.0.x.x and I believe the latest one is 2.5.0.4.
2. Will this same method work to do so? Can I rename the latest clockwork .zip file like this and get it updated?
I thought using the flash clockwork option in ROM Manager would do it, but it doesn't. If I reboot from ROM Manager it goes to the newer version, but if I reboot otherwise it goes to my original. The couple times I've used it, there appears to be maybe some different features/options in the newer one and I feel like I might be missing out on something!
Click to expand...
Click to collapse
Although there is a ClockworkMod 2.5.0.4 version, I don't think it is for the Aria. According to ClockworkMod ROM Manager, 2.5.0.1 is the most current one for the Aria so I am believing what ROM Manager is telling me since it is written by the same the vendor.
I have tried CM 6.1.0
original HTC Aria 2.1 International Rom
and FR001 RC1
all no go. I think it has something to do with the phone already been rooted and has clockworks installed which makes unrevoked unhappy
zyo said:
I have tried CM 6.1.0
original HTC Aria 2.1 International Rom
and FR001 RC1
all no go. I think it has something to do with the phone already been rooted and has clockworks installed which makes unrevoked unhappy
Click to expand...
Click to collapse
OK, let's start from the beginning. You asked about installing an alternate recovery (PSFreedom recovery), but apparently it has its own installation procedure that needs to be run on an unrooted Aria.
What you need is to find just the PSFreedom recovery and copy it to your SD called in a file called LIBEIMG.ZIP and that is how you need to install it on a root phone that has ClockworkMod. Perhaps you need to go back to the PSFreedom thread and ask if a LIBEIMG.ZIP can be produced that can be flashed from HBOOT to replace ClockworkMod.
Looks like everything you need is located in the PSFreedom wiki:
http://psfreedom.com/wiki/HTC_Aria
I got a recovery.bin which is suppose to be used with unrevoked.
are you talking about the same one if I just compress it into a zip file?
Well, I tried flashing CM7 Alpha #39 after getting Clockwork 3.0.0.1 and kept getting stuck on a boot loop. I went back to stock and flashed build #40 and now my Mytouch is stuck on the screen showing "T-Mobile Mytouch 4g" I've tried everything even flashing back to the first nanroid I made and nothing. I've waited for over 16 minutes and it hasn't gone past that screen. Does anyone have any clue what I should do? I'm not going to sleep till I fix it.....
you should try to update the clockwork to a higher version
U need cw recoveries 2.x exp. 2.512 to flash anything 2.2 n the 3.x r ONLY used for gingerbreads...u cant go back 2 stock on gingerbread recoveries so flash the 2.x...hope that helps...im tired hope u can understand me
Is that possible with me only having access to the hboot screen and he recovery screen?
From hboot you should be able to get into fastboot. With fastboot you can flash recoveries, nandroids, and images all via adb.
What would be the 2.x I need? I kind of got how to do adb I just don't know what file I need to use.
kirkcody said:
U need cw recoveries 2.x exp. 2.512 to flash anything 2.2 n the 3.x r ONLY used for gingerbreads...u cant go back 2 stock on gingerbread recoveries so flash the 2.x...hope that helps...im tired hope u can understand me
Click to expand...
Click to collapse
Thank you so much!!!!!!!!!!!!!!! I had to read it twice two get it, but once I did I knew what to do. I got to be more careful.
How were you able to download and install ClockworkMod 3.x? When I installed it via ROM Manager, it automatically installed 2.x without an option for anything newer.
TeeJay3800 said:
How were you able to download and install ClockworkMod 3.x? When I installed it via ROM Manager, it automatically installed 2.x without an option for anything newer.
Click to expand...
Click to collapse
U have to do it thru fastboot or terminal on your phone, but I could never get it to work on my phone. Flashed easily thru fastboot for me.
esincho said:
U have to do it thru fastboot or terminal on your phone, but I could never get it to work on my phone. Flashed easily thru fastboot for me.
Click to expand...
Click to collapse
Yes fastboot is very simple to use as long as you have your adb set up correctly.
1.Place the recovery.img in the "tools" folder of sdk
2. Navigate to sdk-tools folder, open command prompt here
3. Reboot into fastboot/bootloader (either through adb or holding power down and volume down)
4. Fastboot devices, and flash the recovery.... basic steps
Thanks, but I know how to install recovery images. I was asking where you downloaded the 3.x version of ClockworkMod.
I'm really at a stage now where i wanna just throw my htc desire hd at the wall!!!! I am trying to just install a custom firmware, not much to ask considering the mammoth amount of hacking you have to do to even downgrade the firmware. I have done absolutley everything that needs to be done to root this device, i have downgraded the firmware i have rooted it, switched off eng s-off and radio s-off i have full root acess with terminal emulator, i put the update zip on the sd card it says something about installation invalid thats because first time i did not disable radio s-off then it went slightly further but then said some other error i have tried everything, i tried rom manager and selected reboot in recovery mode but now it just makes the phone freeze on the htc boot screen when selecting recovery from the boot menu, can someone please please help, how hard can it be just to install coredroids firmware, why can't it just be as easy as the pd98img firmware
help much apprieciated
clockworkmod recovery works fine. Something has just gone wrong with your installation.
To avoid complications later on, you haven't "switched off ENG S_OFF" you've made made S-ON S-OFF and added ENG S-OFF.
You talk about update.zip, is this for a ROM (CoreDroid?)? Which ROM? Did it tell you to rename it to update.zip? If a ROM then it had nothing to do with Radio S-OFF as you only need that for flashing radio.img files and if it was a radio you were trying to push you should use fastboot not recovery. Are you using the right version of recovery (it's very specific about the version required)?
When everything has been installed correctly and instructions followed it is VERY easy to install coredroid's ROM.
hi thanks for the reply, i just follwed the instructions for installing a custom rom as it asks u to chang it to s-off but the guide also says you need to install the update.zip for clockworkmod to get to choose the custom flash rom you want to use but all i get when i select update.zip from the recovery menu is e:signature verification failed installation aborted
Ok, they don't make it very clear do they?
Have you got ROM Manager installed?
Have you got clockworkmod recovery installed? If so what version is it. If not then use ROM Manager to flash it and flash 2.5.1.3 version (as that what it says).
Get the above. Then let me know.
hi mate its version 4.2.0.2 if i select flash clockworkmod recovery it completly causes the recovery menu in bootloader to just hang on the htc startup screen
stephenuk said:
hi mate its version 4.2.0.2 if i select flash clockworkmod recovery it completly causes the recovery menu in bootloader to just hang on the htc startup screen
Click to expand...
Click to collapse
Sorry, I meant recovery version but it looks like you still need to do that.
In that case push the recovery.img file (grab from the Coredroid thread) using fastboot.
Normally issues are because people miss things but you've confirmed you have ENG S-OFF, Radio S-OFF and root.
ok i tried running this image file in fastboot from this thread http://android.modaco.com/content/z...led-tft-30-nov-2-5-1-3-clockworkmod-recovery/
its written ok but when i select recovery from bootloader it just hangs on the htc startup screen grrr this is just impossible.
That's not for the desire HD.
Grab a 3.x.x.x version from clockwork 3.0.2.8 thread and try that (you can downgrade easily once we got something working).
Sent using witchcraft via XDA Developers Premium App.
Not applicable
Delete this thread
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Too complicated.
Just:
1. turn on phone by holding volume up + power to go to bootloader
2. fastboot oem unlock (confirm it on the phone)
3. fastboot flash recovery recoveryfilename.img
4. Select recovery on the phone.
5. You're in ClockworkMod. Go flash a new ROM.
Let me answer myself.
I don't think the latest rom 2.3.4 is compatible with the clockwork you supplied. So I have to flash my phone back to GRH78. I downloaded the stock ROM from the internet. and then push all the images file into /sdcard/clockworkmod/backup/2010.xxx.
Next, I restore the image in clockwork menu.
after restore, reboot the phone, now I am back in business.
When the phone is boot, i lost the root again, so i went to modaco.com and get Paul's package. run it, restart, I got the root.
Finally, go to market place and get ROM Manager, install the clockwordmod. and I have a 'proper' phone.
although I don't have the least rom, at least i got a working phone that is rooted.
bante said:
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Click to expand...
Click to collapse
I have the same problem. How did you handle it?
Wow, why risk messing up your phone with flashing a boot.img when you can just rename /etc/install-recovery.sh to something like /etc/install-recovery.bak?
Here's one way to rename (courtesy of Matridom). Another is to use Root Explorer.
Matridom said:
The new update applies the install-recovery.sh script into our phones (not there previously.
Boot into the bootloader
flash CWM
select recovery from the bootloader (DO NOT reboot the phone)
apply the su binary
boot into the OS and test root
make sure busybox is properly installed
run ADB shell
then:
Code:
su
mount -o remount,rw /dev/block/mtdblock3 /system
mv /system/etc/install-recovery.sh /system/etc/install-recovery.bak
Boot back into the bootloader and re-flash CWM, should stay permanent now.l had applied the SU binary at the same time as the OTA update, then renamed the installer script and flashed back CWM.
Click to expand...
Click to collapse
andnaz said:
I have the same problem. How did you handle it?
Click to expand...
Click to collapse
same here someone please help ?
This is a totally unorthodox way to make the custom recovery permanent. If your phone is messed up, good luck fixing it.
There is a much easier and safer way like I mentioned.
PS: flashing recovery for 2.3.4 is the exact same as for 2.3.3!
fastboot flash recovery <recovery .img>
Sent from my Nexus S using XDA App
bante said:
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Click to expand...
Click to collapse
Hi Bante, I am sorry for the inconvenience. I have revert back the CWM Recovery to 3.0.2.4. You can download it at the link above, and try it again
I hope that the problem you mention wont persist anymore
zero383 said:
This is a totally unorthodox way to make the custom recovery permanent. If your phone is messed up, good luck fixing it.
There is a much easier and safer way like I mentioned.
PS: flashing recovery for 2.3.4 is the exact same as for 2.3.3!
fastboot flash recovery <recovery .img>
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I am sorry but not all people can successfully use Command Prompt to do so.
I cant use command prompt, as it says "Image cant be loaded".
So I had to use this method.
I search around the forum and seen this as a quite common problem,
so I decided to share it
Hope you understand.
Anyway, thanks for your method too Cheers
andnaz said:
I have the same problem. How did you handle it?
Click to expand...
Click to collapse
The CWM Recovery I supplied is version 3.0.2.5,
which is not compatible.
So I replaced with version 3.0.2.4.
You just download it at the link above and follow all the step again.
You should able to solve this problem
Do notify me if any problem persist
16vMK1 said:
same here someone please help ?
Click to expand...
Click to collapse
The CWM Recovery I supplied is version 3.0.2.5,
which is not compatible.
So I replaced with version 3.0.2.4.
You just download it at the link above and follow all the step again.
You should able to solve this problem
Do notify me if any problem persist
Wow people like to make things complicated. Why install an entire rom to get ride of a script?
if you can flash cwm, you should have some basic understanding of fastboot, adb and the search options in the forums. the answers are all there already.
Sent from my Nexus S
No disrespect, I agree flashing recoverys should only be done after you understand how to use the tools to do it. there is no reason someone who is going to mod systems on their nexus shouldn't be able to use fastboot and adb properly. all the right drivers are in the sdk.
Sent from my Nexus S 4G using Tapatalk
nxt said:
Too complicated.
Just:
1. turn on phone by holding volume up + power to go to bootloader
2. fastboot oem unlock (confirm it on the phone)
3. fastboot flash recovery recoveryfilename.img
4. Select recovery on the phone.
5. You're in ClockworkMod. Go flash a new ROM.
Click to expand...
Click to collapse
This is what I did.
I rooted my NS, which had 2.3.3
Used phone with stock 2.3.3 until I figured out which ROM I want to flash.
Before I flashed any ROM, did a Nandroid Backup through CWM.
Used the ROM for a few days, but when I saw that official update is ready for download for i9020A, did do a restore from the Nandroid backup I created.
Updated from 2.3.3 to 2.3.4, phone works fantastic, video chat also works great.
After update when I tried using any of the apps required SU permission, they didn't work. I tried installing a couple of .apk files, couldn't either install it or after installation it didn't work.
Thought let me try wiping my phone clean and start all over again, may be I will use a custom ROM again, downloaded ROM, went to ROM Manager to reboot into recovery, nothing happens.
Tried booting into Recovery option manually by pressing Volume Up and Power button, nothing happens but the Bot with an Arrow appears on screen.
So, I thought I will follow this procedure to reflash CWM to my phone and get it going. I was able to use the command FastBoot once, and suceeded pushing .img file to my phone but now whenever I try using the commands from my computer, this error message appears : "This application has failed to start becasue AdbWinApi.dll was not found. Re-installing the application may fix this problem."
Why this error message if I have the sdk on my computer already through which I was once able to push .img file without any troubles?
Can anyone tell me what would be a possible solution?
Also, how can I fix this problem and get ClockWorkMod Recovery installed on my NS again?
How can I get stock recovery image on my phone if I want start all over again from scratch?
Thx a million.
Edit ::: I found the answer as to how to how to install CWM again. Thx anyways.
Other question still remains a puzzle... why am I not able to install certain programs or if did manage to install, can't run them?
I ran your method and I think I'm stuck at some step...
My phone now default boots into CWM 3.0.2.4
Recovery boots to a newer recovery I flashed.
How do I get my phone to default boot into the OS again?
Edit: nevermind, just downloaded the full 2.3.4 rom, extracted and flashed the original boot.img.
dreamsforgotten said:
All the right drivers are in the sdk.
Click to expand...
Click to collapse
After installing the sdk and a platform, I have adb, but where is fastboot?
I was getting the same error as "Image cant be loaded". after hours of struggling I found that It's only because I was not in the same directory as the img file. silly eh?
hi,did you repaiar your phone,i have try everything but it just keep going in clockwork mode,if i than pres reboot now in clockworkmode it stays on google padlock
i realy need phone if you can help or someone else,than ....
just tried this method of window7 (thanks for the work) with cwm 3.0.2.4, but got the same result like the others in this thread: cant boot the android 2.3.4, the system is always booting into the cwm, no way out.
I don't think this tool works as it should.
:-(
EDIT:
I didn't realize that window7's tool would install the cwm into the boot-partition instead of the recovery-partition.
To get my boot partition back I downloaded the 2.3.4 firmware image from http://forum.xda-developers.com/showthread.php?t=1056062 and extracted the boot.img from the zip.
with "fastboot flash boot boot.img" I restored my orginal boot partition an can boot into android again.
(fastboot is part of the android sdk)
hi there, so my question is really simple.
I know how to flash a recovery .img via terminal (on my mac), but just can't seem to be able to permanently flash the .zip downloaded via ROM Manager. I reboot my phone in recovery, apply update from sdcard, new recovery replaces older one just for the time being because the next time I reboot my phone in recovery, the new recovery is just gone I am stuck with the older one.... the only way I have been able to update my recovery so far is by flashing it via terminal, I mean the update.zip must be there for a reason.... if I could just flash it without having to use the terminal, it'd be brilliant
So anyone knows how to permanently flash the .zip downloaded via ROM Manager without logging on to a terminal on a computer?
.Zips from ROM Manager are supposed to be 'temporary' ones. Only IMG files can be flashed permanently.
Have a look at the following thread. Should help you out!
http://forum.xda-developers.com/showthread.php?t=1245018
Thanks
So I guess I am just gonna have to download and flash the .img file every time I want to permanently flash a recovery image.
Yes, but I personally don't think that Recoveries is one thing that needs to be updated on a very frequent basis. (I am still on 3.2.0.0)
I agree, not something I'd upgrade on a regular basis. I only updated in order to get rid of the off-mode charging bug which I had in my old recovery and had been annoying me for months! Flashed with Unrevoked, now everything's working perfectly.
thanks for this information