Have EB13, GPS not working now - Epic 4G General

I put my wifes epic back to stock via odin then downloaded the "update.zip". her GPS did work in Eclair, but now it doesn't work in FroYo. i will say that her phone didn't work in the DK28 either, My Epic works fine with DK28.
Anyone else having an issue with GPS with the update.zip method.
downloading the Samsung Froyo Tool Now, will try that next

i stood outside for a bit and didn't get a lock.. i couldnt wait too long though. at least 30 seconds with no lock

Did you install the eb13 modem also the work around was to get a gps lock on eclair then flash the rom try to get a lock then flash modem and try to get lock
Epic 4g

errr.. i just used the update.zip did nothign else

i made sure i had GPS lock via "Google Maps" before i did the update.
The Downloads from Samsung are SO SLOW
I also have My own Epic here and that gets lock on DK28 in not time.

No, sorry, I'm having the opposite effect with EB13: My GPS seems to be more accurate than before!
Months ago, before I tried flashing, my GPS seemed to work fine for navigation purposes with DI18, though I never checked the accuracy. I eventually tried flashing DK28, which killed my GPS entirely. I went back to DI18, where it "worked," but wasn't very accurate. I never got accuracy better than 99 ft. with GPS Status. Today I updated to EB13 by copying the update.zip to my SD card and I went outside about 20 min. ago and cleared aGPS data, then redownloaded it and got a lock in a few seconds, with accuracy to 16 ft. I didn't wait around to see if it would get any better, though I think it would have.
I recommend you download the "GPS Status" app, turn on GPS, then in the app go to [ Menu Button ] >> [ Tools ] >> [ Manage A-GPS State ] >> [ Reset ] then [ Download ]. Make sure you are in a fairly clear area with a good view of the sky and horizon (i.e., not in a city with tall buildings, etc.) and see if you can get a fix.
Also, some people have recommended just going into Google Navigation in the past to get a fix.

Mine is working fine, it is getting a lock quickly. It didn't work very good on DI18, and it worked good on DK28.

Yeah mine is great too
Sent from my Evo Killer!!!

AmericanJedi001 said:
No, sorry, I'm having the opposite effect with EB13: My GPS seems to be more accurate than before!
Months ago, before I tried flashing, my GPS seemed to work fine for navigation purposes with DI18, though I never checked the accuracy. I eventually tried flashing DK28, which killed my GPS entirely. I went back to DI18, where it "worked," but wasn't very accurate. I never got accuracy better than 99 ft. with GPS Status. Today I updated to EB13 by copying the update.zip to my SD card and I went outside about 20 min. ago and cleared aGPS data, then redownloaded it and got a lock in a few seconds, with accuracy to 16 ft. I didn't wait around to see if it would get any better, though I think it would have.
I recommend you download the "GPS Status" app, turn on GPS, then in the app go to [ Menu Button ] >> [ Tools ] >> [ Manage A-GPS State ] >> [ Reset ] then [ Download ]. Make sure you are in a fairly clear area with a good view of the sky and horizon (i.e., not in a city with tall buildings, etc.) and see if you can get a fix.
Also, some people have recommended just going into Google Navigation in the past to get a fix.
Click to expand...
Click to collapse
Yup, GPS Status is your friend! my GPS seems waaaay more accurate now with EB13. Never could get a lock indoors but now it locks to multiple satellites almost instantly! yaaaay!

AmericanJedi001 said:
No, sorry, I'm having the opposite effect with EB13: My GPS seems to be more accurate than before!
......
I recommend you download the "GPS Status" app, turn on GPS, then in the app go to [ Menu Button ] >> [ Tools ] >> [ Manage A-GPS State ] >> [ Reset ] then [ Download ]. Make sure you are in a fairly clear area with a good view of the sky and horizon (i.e., not in a city with tall buildings, etc.) and see if you can get a fix.
Click to expand...
Click to collapse
And you started out saying you have nothing for me ... The GPS Status Program worked like a charm. 2 seconds had lock in maps and Accurate to "2 Meters" ... WOW ... Thanks
Side Note: had this been a "Regular" Customer's Phone. I'm sure they would have been tearing their hair out.

I just tried to get a lock right now and I literally got a lock within 10 seconds of hitting the "My Location" button. There was an MSL fix for the GPS on DK28, I'm sure it'd transfer over to EB13 easily.

I got GPS Lock in about 15 seconds sitting in my basement (with a window over & behind my head), and it was only about 30' off. But then I never really had much trouble with DK28 :shrug:.

Mine took a bit the first time to lock. But after that using the free gps test app for testing I have an accuracy of 5 feet.

i.mykol said:
And you started out saying you have nothing for me ... The GPS Status Program worked like a charm. 2 seconds had lock in maps and Accurate to "2 Meters" ... WOW ... Thanks
Side Note: had this been a "Regular" Customer's Phone. I'm sure they would have been tearing their hair out.
Click to expand...
Click to collapse
Actually, I was replying to "...Anyone else having an issue with GPS with the update.zip method..." from your first post, but I can see how my post was a bit misleading! Anyhow, I'm glad I could help, you're the first person I've assisted on XDA now that I think of it!
GPS Status is very handy indeed!

30 sec after updatein market i had lock within 10 feet. im in living room and the gps up me in driveway.

my EB13 gps fix
All I did was power off my Epic and turn it back on. I used GPS status and within seconds it locked on to various satellites, I was inside my apartment. Google maps also locked just as quickly.

Mine's finally everything I expect in a GPS: locks quickly (within seconds) and has good enough accuracy for RunKeeper. Best I've seen yet is 4m, which I'm sure is good enough for anything I could need my phone for.
Very pleased, because terrible GPS performance with 2.1 is the one thing I hated about this phone...

Related

DII8 - back to GPS issues.

Anyone having major GPS issues? Seems like it was worse than before. Took forever to get a lock while I was driving, had to stop and turn off GPS/back out of Google Nav, go back in. It got a signal for about 10s then lost it.. with full bars. Anyone else having this problem?
Mine still doesn't work at all. -_-
No problems here ... I usually have it off but whenever I need it, I've always gotten a lock immediately and flawless navigation using Google Maps. Absolutely destroys battery though
Took me 15 min to get a lock on a clear day outside on a fresh reboot and still was off on my location. My touch pro 2 never had this problem.. I could use it inside a building full of metal and still get a lock.. I love the Epic but I would not use the gps in its current state of function for navigation purposes..
Sent from my SPH-D700 using Tapatalk
I think for many, it's still having problems on cold boots. Once it locks, it seems to be fine. I never experienced this though, I only have problems getting GPS signal inside buildings.
nimaim said:
I think for many, it's still having problems on cold boots. Once it locks, it seems to be fine. I never experienced this though, I only have problems getting GPS signal inside buildings.
Click to expand...
Click to collapse
No the opposite is true, the problem people are reporting, including those above, are on warm starts where, on occasion, old expired ephemris data is in cache and causes problem getting a lock in otherwise good conditions.
This is much tested and there is a good workaround. By setting the Epic to cold start you overcome this problem, it is stickied as the workaround on the large epic forums elsewhere:
Enter GPS debug/settings application by typing *#1472365#
click "Setup" tab
click "position mode"
Click "starting mode
Enable "Cold Start"
Back out.
Whats the difference between warm start and hot start
mine shows me and my wife in texas half the time and we live in florida, never did it before this update. seems to be picking it up from the wifi I use in my house, as thats ATT and they are SBC and i believe they are in texas, but i never rehooked her phone up to wifi and lattitude shows her in texas at different times and the thing shows me in texas as well, its like cell triangulation doesn't work worth a damn.
nimaim said:
No problems here ... I usually have it off but whenever I need it, I've always gotten a lock immediately and flawless navigation using Google Maps. Absolutely destroys battery though
Click to expand...
Click to collapse
^ Same for me. Never an issue and even locks indoors. Yes it eats batteries for lunch though.
Sent from my wrist watch calculator
The GPS is worthless and can not be relied on. Yes, on occasion it does work and on that rare occasion, it seems to work well. However, on the five occasions that I have NEEDED it, it has failed me completely, NEVER locking on my location. These occasions have been outside with clear sky. When I use GPSStatus, it shows 9 sats but 0 lock. I just don't understand how it can see 9 sats and not lock at all. I have a >10 year old POS handheld GPS that with no network, no maps, no anything locks every time within one minute. Samsung must have actually had to try to f--- this up.
Yes I have applied the cold start "fix" and it has made no difference, sometimes the GPS works and most of the time (especially when I NEED it) it does not.
Using the cold start method posted by aero1, my GPS.... sometimes works. Sitting in my car on a clear day with full signal, the GPS can take up to 5 minutes to get a lock. If I'm moving, It will sometimes lock onto me but still say "searching for GPS" so it won't give me driving directions... even though it can see where I am.
In cases when it does work, it lags a LOT. Sometimes it won't update my position for a minute... which is useless if I have a turn coming up that I don't know about. It is always jumping to where I am every few seconds. Google nav on the EVO was perfectly smooth. It stuck with me around turns and never lagged. Always perfectly accurate. It is the only thing I miss from the EVO.
I've completely given up on the GPS and use my Garmin (/wrists) whenever I need something reliable
hydralisk said:
Using the cold start method posted by aero1, my GPS.... sometimes works. Sitting in my car on a clear day with full signal, the GPS can take up to 5 minutes to get a lock. If I'm moving, It will sometimes lock onto me but still say "searching for GPS" so it won't give me driving directions... even though it can see where I am.
In cases when it does work, it lags a LOT. Sometimes it won't update my position for a minute... which is useless if I have a turn coming up that I don't know about. It is always jumping to where I am every few seconds. Google nav on the EVO was perfectly smooth. It stuck with me around turns and never lagged. Always perfectly accurate. It is the only thing I miss from the EVO.
I've completely given up on the GPS and use my Garmin (/wrists) whenever I need something reliable
Click to expand...
Click to collapse
Same results I'm having now. Using the workaround (cold start) it's hit or miss whether I get a lock or not regardless of how many sats my phone sees.
I put it to "cold boot" and am still getting shaky results. I used it to find my way back to my apartment but it kept putting me on the road NEXT TO the highway and jumping back and forth. Did this again when I was returning from work during lunch just to see if it happened again. Yep, gonna have to lug around my Garmin from now on.
Just sad.
Try this, weird but is working for me.
I installed an app from the market called GPS test to test my GPS signal strength.
Whenever I launch GPS test and then run google navigation it locks on within 10 seconds. If I don't launch GPS test after a cold boot then it takes forever to lock on.
So far this has been working for me for a couple of days. Might be a fluke though.
othan1 said:
Same results I'm having now. Using the workaround (cold start) it's hit or miss whether I get a lock or not regardless of how many sats my phone sees.
Click to expand...
Click to collapse
I've got three epics which allow me to do extensive controlled testing.
before applying the cold start fix my results were as follows on all three when in perfect sat condensations:
a) about 75% of the time no problem with locks
b) about 20% of the time I was getting many sats seen and none locked (expired ephemeris);
b) 5% or less I was getting few sats seen where they should be seen (bad almanac)
I applied cold start method to one Epic and for several days never experienced a failure to lock. I applied cold start to second Epic and now both Epics with cold start applied have gone over two weeks without a single failure to lock. I am now testing some other methods of flushing out cache
Top me this points to main problem being cache which for me ahs disappeared with cold start -- although there are other GPS problems on epic)
Other issues -- not addressed by cold start fix -- are inherent low SNR, SNR thresholds, samsung hacking the difference between fine and coarse results (30 meter hardcoded), these can all cause problems with GPS.
That said there is absolutely a repair of the main cache problem with cold start, I now see my 3g light up every single time I invoke GPS, with non net based applications, reflecting an objective and factual assistance data download --and without cold start I often would see no data usage on invoking GPS meaning failure to pull assistance data.

GPS after the update

I think I've updated my phone with something called Kies mini... I am trying to check my location with the gps but it aint even close to where I live!!!
Everyone talks about how satellites has their gps locked on to but I have no idea how to see that... with gps test.
HELP PLEASE! It has been always showing the same location doesnt matter which city I'm on! (before the update too)...
I think once I have tested this gps fix that was around, but then I went back to normal settings (i guess)... cause it didnt work
Now it it says that I have ECLAIR.UVJI6
I am new to all this
Search the market for an app called "GPS Test". It will show you all of the information you're looking for.
Well, I'm still having GPS difficulties with the newest update (Running Bionix 1.9).
ECLAIR.UVJI6 is the newest update, so don't worry about that.
cwoodworth said:
Well, I'm still having GPS difficulties with the newest update (Running Bionix 1.9).
ECLAIR.UVJI6 is the newest update, so don't worry about that.
Click to expand...
Click to collapse
At least I have the right update :/
tenchi-kun said:
Search the market for an app called "GPS Test". It will show you all of the information you're looking for.
Click to expand...
Click to collapse
I have GPS Test and GPS Status... The first one doest even move at all when I start the application and the second one on the bottom show it seems that is loading something forever. Where do I see the sats? Have no idea. From the second one I will guess that it could be that part that says "fix/sats" and right now is saying 0/2.
My goodness... The damn gps would so useful to stop loosing myself on the German streets
Nothing that I can do to fix it? Is there any news about if this is the last official fix for the gps?
My GPS was working great when I first odin JI6, now all of the sudden it just stop working, I try to odin it back to JI6 again and it still doesnt work so well.
I'm testing the GPS out right now. I've had the phone since wednesday, tried google maps and it's never been able to get my location. I just installed JI6 today and ran GPS test for the first time. I got 0 satellites for a couple of runs until my 3rd try where it eventually got up to 10.
Even though I get locks on GPS test, google maps/navi still can't pick up my location so it's useless =\
In my specific case, I found that the JI6 GPS update did not perform much better than the original version. Yes it was better, but certainly not as good as the JI2 update. So, I've applied the JI2 update and things seem to work much better.
Also, I've found that turning off wifi when making the initial GPS lock really helps reduce the amount of time needed to initially lock.
Good luck!
^ second that. Try to turn off wifi.
Try these maybe:
http://forum.xda-developers.com/showthread.php?t=728894
FYI - Ive had good luck changing to MS Based:
From link-
""In MS-Based mode, the network provides the satellite information to the device, based on a rough estimate of where the device is located, and the device acquires the GPS signals from the satellites and calculates its location. After the initial fix, the device operates like an autonomous GPS receiver, until the satellite information must be refreshed, at which time the device goes back to the network to update the satellite information. MS-Based mode is appropriate for applications that require the device location to be updated rapidly, such as a navigation application. Can the GPS work in autonomous mode? No, the GPS receiver requires the assistance of the network elements to acquire its initial location fix.""
i flashed bionix 1.9 and had more problems with gps than when i was running 1.5. atleast before it was sort of accurate... and found a couple sats after 2-3 minutes. but iwth 1.9... nothing and not even the correct side of the street (showed me east while i was way west). then i found someone who had a gps fix based on j12 and it was in zip so... i mounted that to me SD and reinstalled using clockwork recovery... now within seconds i get gps ... extremely accurate... AND... lock on to most of the satelites that are available. i love it!
Right, so here are my thoughts and experiences while using the new JI6 update:
1) Way more accurate than the previous couple of builds that I have tried. When the GPS does lock, it usually locks onto 10/12 birds and finds my location within 5-6 meters. Not bad! Definitely not as good as when I had GPS working via one of Eugene's Franken-Twiz ROMs (between 2-3 meters), but definitely good enough for daily navigation.
2) The fix for damn sure didn't fix any of the satellite aquisition problems that our phones have been experiencing. Typically for me it will aquire satellites right off the bat about 50% of the time. Other times I'm left waiting 20+ minutes for it to get a lock.
3) Solution I have found to get a quick fix. Type in *#3214789650# (for the new JI6 update) and delete the GPS Data cache. I think it's the last button on the list. After the cache is cleared, use the top button on the list to perform a location test. I've seen this take anywhere from 30 seconds up to 2 minutes... sometimes a bit longer if I am in an area with poor signal coverage. Once I have aquired a successful lock on multiple birds, I simply back out of the application and am good to go. If I leave GPS constantly on, I have found that my phone will maintain the lock almost indef. If I turn the feature off during the day to conserve battery life I have found that it will usually aquire a lock within 30 secs or so of me turning GPS back on IF I am still in the area where I turned the feature off. If I drive to an area an hour or so away from where I turned it off, I usually have to repeat the above process to get a quick fix.
I've tried every iteration of option combinations from the lbltest menu, and have mostly been greeted by similar results, with no one option particularly speeding up the process. Based off of this I am assuming the issue probably lies with the caching of stale data on our phones, and it's inability to purge this data on it's own.
The one thing I haven't tried yet is the JI2 fix mentioned above. I might give this a whirl and see how it works!
BTW, I'm an expat working in Europe, so this might also be the cause of my slow lock times... however every other GPS I own works magnificently over here.
Moped_Ryder said:
Try these maybe:
http://forum.xda-developers.com/showthread.php?t=728894
FYI - Ive had good luck changing to MS Based:
From link-
""In MS-Based mode, the network provides the satellite information to the device, based on a rough estimate of where the device is located, and the device acquires the GPS signals from the satellites and calculates its location. After the initial fix, the device operates like an autonomous GPS receiver, until the satellite information must be refreshed, at which time the device goes back to the network to update the satellite information. MS-Based mode is appropriate for applications that require the device location to be updated rapidly, such as a navigation application. Can the GPS work in autonomous mode? No, the GPS receiver requires the assistance of the network elements to acquire its initial location fix.""
Click to expand...
Click to collapse
That's the first "fix" for the gps? I tried once but it didnt work.
I have tried pretty much all the "fixes" I can think of and this is what I have found. No matter the source (root mods, Bionix, J12/J14/J15/J16-leaked and OTA), changing from 'standalone' to msbased helps tremendously. Also using the google server and port is much much better for faster locks and maintaining lock even if you are not in clear view of the sky (tree, buildings etc will affect you lock). I willl say the stock JFD with the msbased and google server and port was better than just about all the other ones I have tried with the stock standalone and spirint server.
IMO The OTA J16 is the fastest and most accurate (less than 10 feet everytime, less than 30sec fix everytime) that I have tried, but even that required me to use the google server and port, and also switch to msbased.
theking52 said:
i flashed bionix 1.9 and had more problems with gps than when i was running 1.5. atleast before it was sort of accurate... and found a couple sats after 2-3 minutes. but iwth 1.9... nothing and not even the correct side of the street (showed me east while i was way west). then i found someone who had a gps fix based on j12 and it was in zip so... i mounted that to me SD and reinstalled using clockwork recovery... now within seconds i get gps ... extremely accurate... AND... lock on to most of the satelites that are available. i love it!
Click to expand...
Click to collapse
Hey, do I need to root my phone for that?
cathardicnotion said:
Right, so here are my thoughts and experiences while using the new JI6 update:
1) Way more accurate than the previous couple of builds that I have tried. When the GPS does lock, it usually locks onto 10/12 birds and finds my location within 5-6 meters. Not bad! Definitely not as good as when I had GPS working via one of Eugene's Franken-Twiz ROMs (between 2-3 meters), but definitely good enough for daily navigation.
2) The fix for damn sure didn't fix any of the satellite aquisition problems that our phones have been experiencing. Typically for me it will aquire satellites right off the bat about 50% of the time. Other times I'm left waiting 20+ minutes for it to get a lock.
3) Solution I have found to get a quick fix. Type in *#3214789650# (for the new JI6 update) and delete the GPS Data cache. I think it's the last button on the list. After the cache is cleared, use the top button on the list to perform a location test. I've seen this take anywhere from 30 seconds up to 2 minutes... sometimes a bit longer if I am in an area with poor signal coverage. Once I have aquired a successful lock on multiple birds, I simply back out of the application and am good to go. If I leave GPS constantly on, I have found that my phone will maintain the lock almost indef. If I turn the feature off during the day to conserve battery life I have found that it will usually aquire a lock within 30 secs or so of me turning GPS back on IF I am still in the area where I turned the feature off. If I drive to an area an hour or so away from where I turned it off, I usually have to repeat the above process to get a quick fix.
I've tried every iteration of option combinations from the lbltest menu, and have mostly been greeted by similar results, with no one option particularly speeding up the process. Based off of this I am assuming the issue probably lies with the caching of stale data on our phones, and it's inability to purge this data on it's own.
The one thing I haven't tried yet is the JI2 fix mentioned above. I might give this a whirl and see how it works!
BTW, I'm an expat working in Europe, so this might also be the cause of my slow lock times... however every other GPS I own works magnificently over here.
Click to expand...
Click to collapse
Gonna try this out! cheers
finds sats but won't lock on...
I'm still having GPS problems post-update. I've never installed any custom ROMs or any custom GPS fixes other than some tweaking in the LbsTestMode menus, which I have since reverted to the default.
In the LbsTest or the GPS Test app I get the same results: the phone always finds 10-12 satellites just fine (levels in the 20s) but it never locks onto my location. GPS Test will say "In View: 10" for 20 minutes but "In Use" always stays at 0.
Anybody have any ideas here? I was really hopeful that I'd finally have a functioning GPS after this update.
cathardicnotion said:
Right, so here are my thoughts and experiences while using the new JI6 update:
1) Way more accurate than the previous couple of builds that I have tried. When the GPS does lock, it usually locks onto 10/12 birds and finds my location within 5-6 meters. Not bad! Definitely not as good as when I had GPS working via one of Eugene's Franken-Twiz ROMs (between 2-3 meters), but definitely good enough for daily navigation.
2) The fix for damn sure didn't fix any of the satellite aquisition problems that our phones have been experiencing. Typically for me it will aquire satellites right off the bat about 50% of the time. Other times I'm left waiting 20+ minutes for it to get a lock.
3) Solution I have found to get a quick fix. Type in *#3214789650# (for the new JI6 update) and delete the GPS Data cache. I think it's the last button on the list. After the cache is cleared, use the top button on the list to perform a location test. I've seen this take anywhere from 30 seconds up to 2 minutes... sometimes a bit longer if I am in an area with poor signal coverage. Once I have aquired a successful lock on multiple birds, I simply back out of the application and am good to go. If I leave GPS constantly on, I have found that my phone will maintain the lock almost indef. If I turn the feature off during the day to conserve battery life I have found that it will usually aquire a lock within 30 secs or so of me turning GPS back on IF I am still in the area where I turned the feature off. If I drive to an area an hour or so away from where I turned it off, I usually have to repeat the above process to get a quick fix.
I've tried every iteration of option combinations from the lbltest menu, and have mostly been greeted by similar results, with no one option particularly speeding up the process. Based off of this I am assuming the issue probably lies with the caching of stale data on our phones, and it's inability to purge this data on it's own.
The one thing I haven't tried yet is the JI2 fix mentioned above. I might give this a whirl and see how it works!
BTW, I'm an expat working in Europe, so this might also be the cause of my slow lock times... however every other GPS I own works magnificently over here.
Click to expand...
Click to collapse
exact same issue. drive an hour away and the gps is hosed unless you clear it and start it again.
I am also overseas. I wonder if grabbing the GPS settings from I9000 would help? Does anyone have them or know where to find them?
EDIT: nevermind they are the same settings
00sivan said:
exact same issue. drive an hour away and the gps is hosed unless you clear it and start it again.
I am also overseas. I wonder if grabbing the GPS settings from I9000 would help? Does anyone have them or know where to find them?
Click to expand...
Click to collapse
I used the GPS for hours going between statelines with JI6, no problems requiring a signal when I closed out GPS.
The_Tim said:
I'm still having GPS problems post-update. I've never installed any custom ROMs or any custom GPS fixes other than some tweaking in the LbsTestMode menus, which I have since reverted to the default.
In the LbsTest or the GPS Test app I get the same results: the phone always finds 10-12 satellites just fine (levels in the 20s) but it never locks onto my location. GPS Test will say "In View: 10" for 20 minutes but "In Use" always stays at 0.
Anybody have any ideas here? I was really hopeful that I'd finally have a functioning GPS after this update.
Click to expand...
Click to collapse
Reboot the phone, it usually works in this case.
heygrl said:
I used the GPS for hours going between statelines with JI6, no problems requiring a signal when I closed out GPS.
Reboot the phone, it usually works in this case.
Click to expand...
Click to collapse
the thing is... mine worked in the states with the stock JFD without any problem. flawless.
it stopped working when i got overseas. and hasn't worked well since. It really seems like it ONLY works well in the states. I mean I can get it to work if I clear the data all the time, reset the phone all the time, but it's not supposed to work like that. It should just find me when i open maps like any sound person would expect from the device. can anyone contend? is anyone having flawless GPS functionality outside the US?
heygrl said:
Reboot the phone, it usually works in this case.
Click to expand...
Click to collapse
I've rebooted at least 5 or 6 times, as well as clearing the GPS cache ("Delete GPS Data" in LbsTestMode) numerous times as well. Still never gets a location lock despite seeing 10-11 satellites.

[Q] GPS lock issues?

Anyone else having issues getting a GPS lock? I'm sitting inside a building but my Hero would always lock here, especially after resetting the AGPS data with GPS Status program. Tried that with the Shift, and still not getting a lock even after a minute. Not sure what else to try.
Typically I keep mine turned off, but I just turned mine on and went to Maps and it locks my location in.
mine took a little while to initialize (indoors) but it locked in within 30 seconds.
No issues here. Inside my GFs apartment it locks very quick and is probably about 5-10 feet off according to google maps. My moments GPS never locked or worked so I'm extremely happy with the GPS quality on this phone.
The first lock took around a minute to get. Now it gets a solid lock in just a few seconds, if that.
A little off. Not as bad as my gfs Samsung Instinct, but it does often have me a few hundred meters from my actual location.
-NuAngel
Sent from my PG06100 using XDA App
Me and my girlfriend are having constant problems with the gps lock. Seems to work when it wants and disconnects randomly.
Sent from my PG06100 using XDA App
GPS is spotty for me as well. GPS Status won't even get it working for me when it won't work.
When it does work it is not as accurate as my Heroc was. Hopefully this gets some love in any updates.
GPS is great for me. The only issue I've run into is that when I go from Maps to Navigation, my SD card gets mounted as read-only for some reason.
I know a couple of days ago I tried to use my Google Maps/GPS and it couldn't get a lock on me. It was like going crazy or something. However, it was snowing and kinda foggy so maybe that had something to do with it. It worked the next day though when the sky was clear.
No gps lock on my end either. Also tried the gps status clear....nothing so far
EDIT: just opened maps for about a minute or so and it locked finally. Closed maps then opened again, locked within seconds.
Bumping this thread: I have issues with getting a GPS lock. If I open Google Maps, I'll never get a lock (at least not before the phone goes to sleep - 60 seconds). I open up GPS test, which I downloaded from the market. It gets one satellite to lock right away. Sometimes two. Then it takes forever to get 3-4 more (at least 60 seconds). I can then go into google maps, and it will get a lock within 15-20 seconds. But if I let the phone go to sleep, and open up maps again, I don't get a lock, unless I do the GPS test. And sometimes that doesn't even work. I've done the GPS Clear thing, via the epst codes (##GPSCLRX#), and that doesn't seem to do anything. I'm running the MikShiftG 1.1 rom. I'm going to make a nandroid backup, and see if that happens on a stock 2.3.3 rooted rom.

DL30 and GPS

I still notice the gps still takes long to lock in. any suggestions?
Strange, Mines been locking on in no more that 45 seconds, Usually 10 seconds since DJ05...
DLO9 - using leaked 2.2 Rom
My GPS is taking much longer to lock also - i guess its the trade-off for getting 2.2.
The leak 2.2 rom run better than the other Roms I tried.
Sent from my SCH-I500 using XDA App
Odd, mine locks on better than any 2.1 rom and almost instantly.
Oddly enough, got worse on superclean 2.2. With DL09 and superclean (with help from gps status) i was locking within 10-15 seconds, now it takes upwards of 45s-1minute, if it locks at all. A little disappointing, but nothing to make me dump 2.2. Crossing my fingers that it'll get better....
My experience with all 2.2 ROMs so far has been that GPS either locks near-instantly (<15s) or absolutely will not lock at all. It seems to be about a 50/50 crapshoot. If it doesn't work, turning GPS off, waiting a few moments, and then turning it back on and trying again *usually* gets it working.
Granted I haven't tried since jt released the updated recovery, so I'll have to check a few more times and report back.
Try flashing the DJ05 GPS fix that was tested on people with Dl01?
I've long given up on the GPS, I just use my Iphone 3GS that without data connection still locks on really fast.
I tried DL09 when first going to Superclean 1.0. The GPS would lose the signal then regain it. This happened about three times during a hour long route.
Flashed DJ05 last night and tried the GPS again this morning and not once did it lose the signal driving into work.
My gps doesn't WORK AT ALL with DL30 superclean 1.0.
Mine locks in 10 seconds or less running DL30 SuperClean 1.0 with DJ05 radio.
I have been having a problem with GPS on DL30/DL09 also. Here is how I got it to lock today in less than 10 seconds.
1. Download GPS Status from the market.
2. Run GPS Status and let it download the AGPS data.
3. Go into settings>GPS & Sensors>Auto-download AGPS data and set it to never.
4. Close GPS Status and reboot phone with GPS turned on.
5. Once booted, run GPS Status and hopefully you will get almost insta-lock.
6. Open Maps or Navigation and you should be good to go.
Next time you try GPS and it doesnt lock, go back into GPS Status>options>tools>download and manually download the AGPS data then reboot.
Its a pain but its the only way I know of thus far to get "insta-lock" after going Froyo on my phone. I dont use my GPS all that often so this method isnt a big deal for me, but if I relied on GPS daily, I would seriously consider buying a different phone at this point. That or try and get a refurb that has a working GPS like some people here seem to have.
mastamoon said:
I have been having a problem with GPS on DL30/DL09 also. Here is how I got it to lock today in less than 10 seconds.
1. Download GPS Status from the market.
2. Run GPS Status and let it download the AGPS data.
3. Go into settings>GPS & Sensors>Auto-download AGPS data and set it to never.
4. Close GPS Status and reboot phone with GPS turned on.
5. Once booted, run GPS Status and hopefully you will get almost insta-lock.
6. Open Maps or Navigation and you should be good to go.
Next time you try GPS and it doesnt lock, go back into GPS Status>options>tools>download and manually download the AGPS data then reboot.
Its a pain but its the only way I know of thus far to get "insta-lock" after going Froyo on my phone. I dont use my GPS all that often so this method isnt a big deal for me, but if I relied on GPS daily, I would seriously consider buying a different phone at this point. That or try and get a refurb that has a working GPS like some people here seem to have.
Click to expand...
Click to collapse
Didn't work for me. installed DJ05 and still nothing :[
Ive had some weird experience with GPS. DI01 My gps was garbage. like 2 mile blue sphere. DJ05 my gps was pretty good... locked accurately but took about 2 minutes. Borked my phone trying to edit some stuff... redid DJ05... GPS didnt work again... did DL09... GPS still didnt work... redid DL09... GPS worked pretty well again... DID DL30... GPS locks nearly instantly and almost perfectly.
It seems like every time I flash I have different results...even when sometimes I'm flashing the same roms from the same sources. I don't really get it... I'm almost in the same areas so it should be consistant.
I always clear all the caches and everything :\
Ive done many different gps tests and here is whats happening...if you try to turn gps on through the notification pulldown...it takes a while. If you turn gps on through settings...location and security...standalone gps...its instant. After turning gps on through settings, it will work from the pulldown every time instantly. Basically it needs to be turned on from settings for the 1st time after a reboot...then the pulldown will be instant. To test this, reboot phone with gps off, when it boots turn gps on from the pulldown...it wont lock...go to settings and turn it off then on...it will lock instantly. Like i said, it seems to need to be turned on through settings initially, then it works instantly any way you use it...hope i helped.
That's strange. I haven't had an issue locking on since DI01. I also love how fantastically loud the Nav directions are now. I agree that gps status can greatly accelerate the locking on process.
Kamar234 said:
That's strange. I haven't had an issue locking on since DI01. I also love how fantastically loud the Nav directions are now. I agree that gps status can greatly accelerate the locking on process.
Click to expand...
Click to collapse
daym you!! lol. maybe it's time to go get a replacement?

To anyone having gps issues

To help most people with gps locking issues
1) download gps status from the market
2) turn gps on
3) open gps status
4) hit menu button, tools, manage a-gps state, then select reset
5) hit menu botton, tools, manage a-gps state, then select download
6) give the phone a clear view of the sky, when you get signal you will see the middle row fill with info and satellites in green on the bottom.. Back out and open gps app of choice.
How this helps
Sent from my Rocking dj05, themed superdark w/o swype mod, voodoo 5, with custom boot and shutdown.. With premium xda app.
check this post in the htc desire, it helped me out tremendously
http://forum.xda-developers.com/showpost.php?p=11342772&postcount=1
I will try this my gps never locks on and I cant use google navigation it sear,hes for signal for e er
3 Easy Fixes for GPS
neh4pres said:
To help most people with gps locking issues
1) download gps status from the market
2) turn gps on
3) open gps status
4) hit menu button, tools, manage a-gps state, then select reset
5) hit menu botton, tools, manage a-gps state, then select download
[...]
Click to expand...
Click to collapse
Just want to list out the 3 tips that really helped with GPS locks (for me):
1. d/l "GPS Status" and aGPS reset/download (this thread);
http://forum.xda-developers.com/showthread.php?p=11872531
Thanks to neh4pres!
2. use "GPS Status" d/l to recalibrate magnetic compass;
http://forum.androidcentral.com/verizon-fascinate/97732-gps-probs-check-your-mag-compass.html
Thanks to j32driver!
3. modify /etc/gps.conf entry (requires root/temp root) changing NTP_SERVER=north-america.pool.ntp.org to NTP_SERVER=us.pool.ntp.org.
http://forum.xda-developers.com/showthread.php?t=1038649
Thanks to calebv2!
Sadly, these fixes will not fix issues related to bad satellite coverage/visibility/interference. And won't fix EC09 fried SD cards, either.
Thanks for all the links and help here. My GPS has always been sub par. While it will still not lock on when I'm in my living room, it gives me fairly accurate locks when outside.
Rush
Glad to see this helped people.. For really stubborn gps locks, follow my original instructions after a fresh boot.
Sent from my frozen yogurt filled fascinate
Bingo. I had updated to ED01 and was getting nuthin' at all from the GPS. Did the reset/update AGPS, adjusted the NTP server, and within 5 seconds or so had 8+ satellites and 14-foot accuracy. Sweet.
I had tried all listed suggestions above and still could not get a lock without a 2+ minute delay (and only using GPS Status could i finally get a lock)
I updated my radio to EC09 last night and Instant GPS!!
So excited about that I can even pull GPS without cell signal which i have never been able to do before.
Editing the GPS.conf work perfectly. I went from no locks to locking in 2-3 seconds.
as soon as vzw comes out with a dual core lte that i like, i will dump my fassy bc of the gps lock issue. i have tried every "fix" i could find since i got the phone over 1 year ago, and still have issues. whats odd is that i can have a perfect lock and use gps to arrive at a destination, but when i leave the building cant reaquire! sometimes a battery pull solves the problem, sometimes just 20+ min of waiting. uggg!
Helped me !!!
took just 1 minute in total LOL.
god bless mate .
I now use "gps aids" from market.. It seems to work little better.. Next time im at a computer I'll update op
Sent from a beautiful miui fascinate
The GPS.conf thing, I looked in mine and I have:
NTP_SERVER=us.pool.ntp.org
NTP_SERVER=north-america.pool.ntp.org
NTP_SERVER=0.north-america.pool.ntp.org
NTP_SERVER=1.north-america.pool.ntp.org
NTP_SERVER=2.north-america.pool.ntp.org
NTP_SERVER=3.north-america.pool.ntp.org
so do I win?
Sent from my MIUI SCH-i500
Gps booster from market works wonders

Categories

Resources