Related
As Amon Ra put it:
"The following instructions :
will void all warranties of your phone!
will erase all your userdata!
will change your current ROM/SPL!
will change your current splash screen!
could brick your phone!
Proceed at your own risk!"
So I've taken the guide that I used to root my myTouch 1.2 with T-Mobile, updated some of the information, and added some explanations. All thanks is owed to The Unlockr for the guide, I'm merely going to attempt to explain what your actually doing in the process and just try make the whole ordeal easier. If I would have known what i was actually doing, it would have taken me 45 minutes to root my phone, vice the good 7-8 hours I put into it. I am by no means an expert on rooting, so feel free to critique what I put in here, and I'll make adjustments as needed.
What's unique about the myTouch 1.2 and the Fender edition is that both phone's have a "perfected" SPL, that does not allow for fastboot access via USB. This means that you can't push any command prompt commands to the phone from your computer, which is what you have to do to get the phone rooted. With these instructions, you'll flash a "non-perfected" SPL onto your phone, load up a custom recovery (which is how you will load up ROM's and do a few other things in the future), and then reflash the phones original "perfected" SPL. Without the original SPL, your phone will not function correctly.
I would suggest opening all the links before continuing so you won't have to wait for the downloads to start as your going. Make sure you remember which link is which tab!!!
From The Unlockr:
I. Setup ABD/Create a Goldcard
Follow this procedure completely to create a working goldcard, then return to this procedure and continue:
How to Create a Goldcard
Follow these instructions without fail. If anything get's messed up here then you won't be able to flash a new SPL and you'll have to attempt to remake the Goldcard again. If you attempt to load the sappimg without using the Goldcard or without a properly done Goldcard, you will get either "Incorrect model ID" or "Main Version is Older". The Goldcard basically tricks the phone into not checking these two parameters, which is what let's you get the "unperfected" SPL on to your phone. ADB is the program that allows you to have a command prompt interface from your computer to your phone.
Note for Windows Vista and Windows 7 users: When your setting up your phones drivers during the ADB setup process, be sure to allow Windows Update to check for drivers. It will allow your computer to automatically install the drivers vice having to manually install them yourself. The option to turn it on should come up when Windows gives the notification that it was unable to install drivers for your device
II. Flash the Sappimg file
1. Download the Sappimg File and save it to your newly created goldcard (NOT in any folders, just on the Goldcard itself).
sappimg.zip
2. Once the sappimg.zip file is on your goldcard, turn off the phone and put your Goldcard SD into your phone. Then turn it back on by holding down Volume Down and Power. It should boot into bootloader mode and automatically find the sappimg file and ask you to push the trackball to begin the update. Push the trackball and let it update.
*If it tells you Error – Wrong Model ID or anything similar, the goldcard was not created correctly, go back to that procedure and try again.
Here your loading an Engineering SPL, so that we'll be able to get access to the phone via Fastboot USB and load up your new recovery. Be patient once you turn your phone back on, as it will unzip the file, then check the contents. If you get an error, you've got a problem with your Goldcard and need to redo it.
3. Once it finishes flashing press the "Send" button to reboot and you will notice your touchscreen does not work (don’t panic). Turn off the phone, then turn it back on by holding down Back and Power (to get into fastboot mode).
4. Download these two files and save them into C:\AndroidSDK\Tools folder you setup during the ADB setup procedure:
Stock MyTouch SPL
and Radio
5. Then download the Custom Recovery Image and save it to the C:\AndroidSDK\Tools folder you setup during the ADB setup procedure as well:
Amon Ra’s Recovery
6. Now that you have the recovery, spl and radio all saved in the tools folder of the Android SDK (same folder as the adb program), plug in your phone (while in fastboot mode from step 3).
7. Open the command prompt on your computer and type the following with hitting enter at the end of each line:
cd\
cd AndroidSDK\tools
fastboot devices
A serial number should come up, indicating that your computer can see the phone in fastboot mode. If so continue by typing in the following with hitting enter at the end of each line:
fastboot flash radio radio.img
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
8. Once the phone starts to turn back on begin holding home and power (do not let go until you see the recovery mode) to boot into recovery mode.
This could take a while. I believe the first time I tried to get in I had to hold them down for ~1 minute before getting in. You should see the HTC Magic splash screen pop up first. There is a guide to changing out the splash screen (which is just a picture) within these forums but I'll leave it to you guys to search for it.
9. You should end up in Amon Ra’s recovery mode.
10. At this point, you want to plug your ORIGINAL SD card into your computer and copy the "DCIM" and "Music" folders (if you have them) over to your computer to backup your pictures/video/music. Then take the Goldcard out of your phone and put your ORIGINAL SD back in.
11. With your phone connected via USB to your computer and in Amon Ra's Recovery, highlight USB MS and press the trackball. This should mount your SD card to your computer so that you can move files to it.
12. Download these three .zip files:
Cyanogen 6.1
Google Apps
614 MHz OC/UV Kernel
You need the OC kernel because there's a known issue with CM 6.1 having a green tint without flashing a new kernel.
13. Copy those three files over to your phone's SD within Windows, "Safely remove hardware" in Windows, then disable USB MS by pressing the Home button. Back out to the main screen.
14. In the recovery select "Wipe" and you want to wipe "data/factory reset" then "Davik-cache".
15. Back out to the main menu and select "Flash zip from sdcard". First you want to select " update-cm-6.1.0-DS-signed.zip" and hit Home to confirm. Once complete, select "Flash zip from sdcard" and this time select "gapps-mdpi-tiny-20101020-signed.zip" and hit Home to confirm. Once complete, one again select "Flash zip from sdcard" and this time select "oc614-cm-2.6.34.1-6.0.0rc2-signed.zip" and hit Home to confirm.
16. Back at the main screen select "Reboot system now". This will load your phone back up as normal and you should now have a working rooted phone with the Cyanogen 6.1 ROM! Jump in there and check it out.
If you want to try out a different ROM, check this thread out. Go to the section called "MT3G 1.2 / LE Fender".
Thanks to Amon Ra for his recovery images!
Thanks to Unlockr for the original How To!
Thanks to the Cyanogen team for an awesome ROM!
LINK Resources:
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
http://forum.xda-developers.com/showthread.php?t=530492
http://forum.xda-developers.com/showthread.php?t=529019
DonJuan692006 said:
As Amon Ra put it
"The following instructions :
will void all warranties of your phone!
will erase all your userdata!
will change your current ROM/SPL!
will change your current splash screen!
could brick your phone!
Proceed at your own risk!"
So I've taken the guide that I used to root my myTouch 1.2 with T-Mobile, updated some of the information, and added some explanations. I also uploaded all the files to a central server so that you don't have to use RapidShare or MegaUpload, which are both just pains in the arse. All thanks is owed to The Unlockr for the guide, I'm merely going to attempt to explain what your actually doing in the process and just try make the whole ordeal easier. If I would have known what i was actually doing, it would have taken me 45 minutes to root my phone, vice the good 7-8 hours I put into it. I am by no means an expert on rooting, so feel free to critique what I put in here, and I'll make adjustments as needed.
What's unique about the myTouch 1.2 and the Fender edition is that both phone's have a "perfected" SPL, that does not allow for fastboot access via USB. This means that you can't push any command prompt commands to the phone from your computer, which is what you have to do to get the phone rooted. With these instructions, you'll flash a "non-perfected" SPL onto your phone, load up a custom recovery (which is how you will load up ROM's and do a few other things in the future), and then reflash the phones original "perfected" SPL. Without the original SPL, your phone will not function correctly.
From The Unlockr:
I. Setup ABD/Create a Goldcard
Follow this procedure completely to create a working goldcard, then return to this procedure and continue:
How to Create a Goldcard
Follow these instructions without fail. If anything get's messed up here then you won't be able to flash a new SPL and you'll have to attempt to remake the Goldcard again. If you attempt to load the sappimg without using the Goldcard or without a properly done Goldcard, you will get either "Incorrect model ID" or "Main Version is Older". The Goldcard basically tricks the phone into not checking these two parameters, which is what let's you get the "unperfected" SPL on to your phone. ADB is the program that allows your to have a command prompt interface from your computer to your phone.
Note for Windows Vista and Windows 7 users: When your setting up your phones drivers during the ADB setup process, be sure to allow Windows Update to check for drivers. It will allow your computer to automatically install the drivers vice having to manually install them yourself. The option to turn it on should come up when Windows gives the notification that it was unable to install drivers for your device
II. Flash the Sappimg file
1. Download the Sappimg File and save it to your newly created goldcard (NOT in any folders, just on the Goldcard itself).
sappimg.zip
2. Once the sappimg.zip file is on your goldcard, turn off the phone and put your Goldcard SD into your phone. Then turn it back on by holding down Volume Down and Power. It should boot into bootloader mode and automatically find the sappimg file and ask you to push the trackball to begin the update. Push the trackball and let it update.
*If it tells you Error – Wrong Model ID or anything similar, the goldcard was not created correctly, go back to that procedure and try again.
Here your loading an Engineering SPL, so that we'll be able to get access to the phone via Fastboot USB and load up your new recovery. Be patient once you turn your phone back on, as it will unzip the file, then check the contents. If you get an error, you've got a problem with your Goldcard and need to redo it.
3. Once it finishes flashing press the "Send" button to reboot and you will notice your touchscreen does not work (don’t panic). Turn off the phone, then turn it back on by holding down Back and Power (to get into fastboot mode).
4. Download these two files and save them into C:\AndroidSDK\Tools folder you setup during the ADB setup procedure:
Stock MyTouch SPL
and Radio
5. Then download the Custom Recovery Image and save it to the C:\AndroidSDK\Tools folder you setup during the ADB setup procedure as well:
Amon Ra’s Recovery
6. Now that you have the recovery, spl and radio all saved in the tools folder of the Android SDK (same folder as the adb program), plug in your phone (while in fastboot mode from step 3).
7. Open the command prompt on your computer and type the following with hitting enter at the end of each line:
cd\
cd AndroidSDK\tools
fastboot devices
A serial number should come up, indicating that your computer can see the phone in fastboot mode. If so continue by typing in the following with hitting enter at the end of each line:
fastboot flash radio radio.img
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
8. Once the phone starts to turn back on begin holding home and power (do not let go until you see the recovery mode) to boot into recovery mode.
This could take a while. I believe the first time I tried to get in I had to hold them down for ~1 minute before getting in. You shout see the HTC Magic splash screen pop up first. There is a guide to changing out the splash screen (which is just a picture) within these forums but I'll leave it to you guys to search for it.
9. You should end up in Amon Ra’s recovery mode.
10. At this point, you want to plug your ORIGINAL SD card into your computer and copy the "DCIM" and "Music" folders (if you have them) over to your computer to backup your pictures/video/music. Then take the Goldcard out of your phone and put your ORIGINAL SD back in.
11. In Amon Ra's Recovery, use the trackball to select "Partition sdcard", the "Partition SD", hit Home four times and this will partition your sd card.
This process chops your sd card storage up to allow for swap data to be stored on the first part, apps to be stored in the ext part, and everything else will be stored in what's left.
12. Back in "Partition sdcard" select "SD:ext2 to ext3".
13. Back out to the main menu and highlight USB MS and turn it out. This should mount your SD card to your computer so that you can move files to it.
14. Download these two .zip files:
Cyanogen 5.0.8
Google Apps
15. Copy those two files over to your phone's SD within Windows, "Safely remove hardware" in Windows, then disable USB MS by pressing the Home button. Back out to the main screen.
16. In the recovery select "Wipe" and you want to wipe "data/factory reset" then "Davik-cache".
17. Back out to the main menu and select "Flash zip from sdcard". First you want to select "update-cm-5.0.8-DS-signed.zip" and hit Home to confirm. Once complete, select "Flash zip from sdcard" and this time select "gapps-ds-ERE-36B-signed.zip" and hit Home to confirm.
18. Back at the main screen select "Reboot system now". This will load your phone back up as normal and you should now have a working rooted phone with the Cyanogen 5.0.8 ROM! Jump in there and check it out.
If you want to try out a different ROM, check this thread out. Go to the section called "MT3G 1.2 / LE Fender". Just download the .zip and follow steps 8, 9, 10, 13, 15 (copying the new .zip file only unless the ROM has a requirement for additional ones), 16, 17, and 18.
Thanks to Amon Ra for his recovery images!
Thanks to Unlockr for the original How To!
Thanks to the Cyanogen team for an awesome ROM!
LINK Resources:
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
http://forum.xda-developers.com/showthread.php?t=530492
http://forum.xda-developers.com/showthread.php?t=529019
Click to expand...
Click to collapse
thanks, just purchased a MT3G 1.2 and this guide helped. I don't even care that you basically copied it off of unlockr.
Glad it helped. Yes it is pretty much jacked from Unlockr, but like I said in my first paragraph, I was just trying to break things down a little bit and updated the recovery image and also put a better (IMO) ROM that the stock Fender one they were using. The Unlockr has actually updated their guide using some of my stuff.
step 8?
ive made it to step 8. after the phone reboots I hold down the home and power button as directed and nothing happens. Im just stuck at the HTC Magic screen. I held it down for 3 minutes on a few different occasions and still get nothing. So i havent made it into the recovery menu. any suggestions?
jim
Just to confirm, you do have the 3.5mm Jack at the top of your mytouch, correct? What does your phone show when you boot into fastboot (back+power)?
Sent from my HTC Magic using XDA App
Yes, my phone does have the 3.5mm Jack on top. Fastboot screen says
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
Jun 2 2009, 17:27:03
Did all the commands work from step 7? Your still on the engineering SPL and by step 8 you should be back to the original SPL.
Sent from my HTC Magic using XDA App
step 7 went fine. the last command "fastboot reboot-bootloader" said done and the phone restarted (still plugged into the computer). I held down the home button and power button in step 8 but the phone never goes past the HTC Magic screen. thanks for the quick reply.
Jim
You've got to be missing something if your showing the information you posted in fastboot. When you entered the commands on the computer, did you see a loading bar pop up on the upper right-hand corner on your phone screen?
Sent from my HTC Magic using XDA App
I don't mean to sound like a big doofus, I read your post.
It looks to be extremely thorough.
I have already bricked 1 MYT3G following instructions from unlokr(although it was a couple of months ago), so don't blast me too much, but is this for the MYT3G that has the 3.5 headphone jack?
Yes it it for the one with the 3.5mm Jack, as stated in the thread heading.
Sent from my HTC Magic using XDA App
Wow, Completely missed that. Now you can call me a doofus.....
Thanks, I will attempt to do this tonite and see what happens.
I saw the loading bar in the upper right of my screen in step 2 with the sappimg but thats it. Should I start over and try again? What is incorrect with the info from my fastboot? what should i be looking for it to say? thanks again DonJuan.
fjsimpkins said:
I saw the loading bar in the upper right of my screen in step 2 with the sappimg but thats it. Should I start over and try again? What is incorrect with the info from my fastboot? what should i be looking for it to say? thanks again DonJuan.
aksoutherland - this is for the mytouch with the 3.5mm jack on top
Click to expand...
Click to collapse
The information your seeing now in fastboot is what you flashed with the sappimg.zip. You needed to get that on there so that you could flash your custom recovery (Amon Ra's) which will let you flash ROM's later on. What you were doing in Step 7 was reflashing the stock radio/hboot, without these, the phone will not work. Looking at your fastboot information now tells me that you either skipped the part where you reflashed the radio/hboot, or it didn't work. Did you unzip the AndroidSDK.zip to C:\AndroidSDK\? Did you copy the recovery.img, radio.img, and hboot.nb0 to your android SDK tools folder?
ok i understand a little more now. but i did extract the androidsdk.zip and moved the radio, hboot, and recovery all to the tools folder in androidsdk. maybe one of the files is corrupt? would it make a difference if the phone wasnt plugged to get into recovery mode? Im going to try again tonight after work. thanks
Last night I flashed without issue. Thank you very much for the howto - it worked perfect. Am now running CM6-RC2 and really happy with it.
Someone should post "the ultimate guide to UNBRICK the MyTouch1.2/Fender guide" LOL!
cmarti said:
Someone should post "the ultimate guide to UNBRICK the MyTouch1.2/Fender guide" LOL!
Click to expand...
Click to collapse
LOL, it would go something like this:
1. Tightly grab bricked myTouch.
2. Find either a building that's 3 stories or more higher, or a very deep body or water.
3. Throw phone off of building/into water.
4. Buy a new one off eBay or make a claim against your phone insurance.
ok so ive managed to make it to step 17. when i try to flash cm 5.0.8 the phone tells me unable to open the .zip. Im a bit further than i was before and almost to the end actually. any guess why it wont open the zip?
Was the ZIP downloaded right? Check it on your computer.
Finally S-Off. Thanks to alpharev (generous donation on its way)
Now first problem;
I am the least tech savvy guy on the planet. If not, around London
As you see, the problem is me. So I need a genuine idiot proof step by step guide.
Can someone recap everything in a simple way please?
Backup, root, overclock etc...
Anyone who helps will receive a guaranteed prayer from a religion of their choice
download eclair rom from shipped roms, install it, then download unrevoked, root with it and youll get custom recovery also with unrevoked, after that follow some other guides how to properly flash a custom rom thru that recovery.
(before the rooting part, install htc sync to get all the needed drivers. WARNING: before using unrevoked to root the device, uninstall just htc sync but everything else that was installed with it - leave it installed. btw im atheist )
Sent from my HTC Wildfire using Tapatalk
What I've found so far is;
I need to "root" my phone. Root means gaining superuser access right? (froyo 2.2. hboot 1.01)
http://forum.xda-developers.com/showthread.php?t=1130044
Link above supposed to do the job.
-After rooting the phone I need to "nandroid" backup my phone. Nandroid will appear in the boot menu when I root my phone right? wrong?
i didnt do any backups xD, i just soffed, installed 2.1 wwe ruu, rooted with unrevoked and flashed cm7
Sent from my HTC Wildfire using Tapatalk
The phone is not rooted. ROMs are rooted. You can very well follow that guide, but, I used Fastboot to install ClockWorkMod Recovery (Which is having all those options you are listing - ie Nandroid, Install ZIP From SDCard etc).
The Fastboot method needs just one command to install Clockworkmod Recovery, but needs to have Android SDK installed. If you are willing to do that:
- Download Android SDK - http://developer.android.com/sdk/index.html
- Download ClockworkMod Recovery - http://forum.xda-developers.com/showthread.php?t=1014498
- Extract the Recovery.img file from the 2nd link, and place it in your SDK Setup Path / Tools (eg: C:/android-sdk-windows/tools)
- Open a Command Window (cmd)
- Browse to the tools folder in this Command Window
- Type the command fastboot flash recovery recovery.img
- It will install ClockworkMod Recovery, you are done.
Then, simply follow Part 3 of this guide to install Custom ROMs and Stuff:
http://forum.xda-developers.com/showthread.php?t=824396
smokzye said:
i didnt do any backups xD, i just soffed, installed 2.1 wwe ruu, rooted with unrevoked and flashed cm7
Sent from my HTC Wildfire using Tapatalk
Click to expand...
Click to collapse
long winded way of doing it
we need a step by step with pics or at least a video on youtube, theres nothing there at teh moment.
Once you have S-OFF follow these steps:
1. Get fastboot.exe, CWM and the su binary from the attachment below, make sure you extract the archives.
2. Download Android SDK from here: http://developer.android.com/sdk/index.html
2. Install SDK to C:/, place fastboot.exe and the recovery.img in android-sdk/platform-tools
3. Shut down phone, get into bootloader (volume down + power button)
4. Select FASTBOOT using volume keys, press power button (you are now in fastboot mode)
5. Connect phone to computer, select disk drive.
6. Open cmd, type cd C:/android-sdk/platform-tools
7. now type "fastboot flash recovery recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img" (no quotes)
8. Now you should have Clockworkmod installed, but still no root so:
9. Copy su-2.3.6.1-ef-signed to sdcard.
10. Get into bootloader again, select recovery.
11. Select "install zip from sdcard", confirm with trackball.
12. Scroll down to su-2.3.6.1-ef-signed, confirm the install, now you are rooted!
13. Do a nandroid backup from clockworkmod.
14. Repeat steps 9-12 but use the ZIP of ROMs, Kernels or Radio if you wish. Wipe all data before installing a fresh rom (ty calyxim ^^)
Complete list for ROMs/Kernels/Radio here: http://forum.xda-developers.com/showthread.php?t=1029318
I hope this is clear enough?
Thanks mate. Worked wonders. In what religion would you like your prayers?
I would like to make an addition to step 14; Wipe all data before installing a fresh rom
This is the most idiot proof way i could find, and that i could use lol..... big props to Nejc121
nejc121 said:
Okay, it took me some trying and stuff but I finaly found a way!
Okay, this is going to be simple step-by-step
FirsT: Copy this to the root of your SD card: http://forum.xda-developers.com/attachment.php?attachmentid=548407&d=1300751790
Second: Go into HBOOT and click yes when it asks you to update (note: Please make sure your SD card is FAT32 and not FAT, it must be FAT32 for this step to work.
Third: Remove the img file from your sd card and add this file: http://bit.ly/su2361ef
Fourth: Go into HBOOT and click Recovery!
Fifth: Click install zip from sdcard (or some thing like that)
Sixth: Click choose zip from sdcard
Seventh Locate your zip and let it update
AND YOU'RE DONE!
Have fun being free!
If you're having problems with the HBOOT not detecting the .zip update, please check if you SD card is FAT32.
Click to expand...
Click to collapse
smokzye said:
download eclair rom from shipped roms, install it, then download unrevoked, root with it and youll get custom recovery also with unrevoked, after that follow some other guides how to properly flash a custom rom thru that recovery.
Click to expand...
Click to collapse
NOPE. Wrong way after alpharev S-OFF.
smokzye said:
i didnt do any backups xD, i just soffed, installed 2.1 wwe ruu, rooted with unrevoked and flashed cm7
Click to expand...
Click to collapse
Have u done S-OFF with xtc clip or alpharevX. Let me know what u did including complete rooting process.
how do I get in to HBoot, when I press vol down and power nothing else happens beside to lock the phone and go to vibra mode
Make sure it's vol-, because the phone vibrates if you're holding vol+ and power...
7. now type "fastboot flash recovery recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img" (no quotes)
when I write that in to cmd and press enter is wrtitten "waiting for device" for long time
When i do that i have phone still in hboot usb plug
Should I reboot and write in normal phone mode or .....?????
Try renaming 'recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img' to 'recovery.img'. I had to do this in Linux, but worked fine after.
rupa30 said:
7. now type "fastboot flash recovery recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img" (no quotes)
when I write that in to cmd and press enter is wrtitten "waiting for device" for long time
When i do that i have phone still in hboot usb plug
Should I reboot and write in normal phone mode or .....?????
Click to expand...
Click to collapse
installing and uninstalling htc sync helps. just to extract drivers I suppose...
Clockwork mod doesn't work properly for me. Whenever I select any option the menu disappears and the background just sits there. I can click really fast and it will just reappear and disappear rapidly.
Fix?
rupa30 said:
7. now type "fastboot flash recovery recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img" (no quotes)
when I write that in to cmd and press enter is wrtitten "waiting for device" for long time
When i do that i have phone still in hboot usb plug
Should I reboot and write in normal phone mode or .....?????
Click to expand...
Click to collapse
That wait is normal if it below 2-3 min. But if it takes longer u should check the drivers.
That wait generally occurs if u connect the device after entering the command (happens to me everytime). If it is so, shouldn't disconnect the device and wait for a while till it detects.
If it is not so and wait is longer, then go for reinstalling the drivers.
Sent from my HTC Wildfire using XDA App
rupa30 said:
how do I get in to HBoot, when I press vol down and power nothing else happens beside to lock the phone and go to vibra mode
Click to expand...
Click to collapse
This occurs when pressing vol down + power on a full booted phone.
U should not do this. Switch off the device and then hold vol down + power. There goes into hboot mode. And for that recovery installation u should go into fastboot mode though from there.
as it was now clear, the waiting shouldn't be there now. Enter fastboot mode and try it
Sent from my HTC Wildfire using XDA App
AloneInShadow707 said:
Once you have S-OFF follow these steps:
1. Get fastboot.exe, CWM and the su binary from the attachment below, make sure you extract the archives.
2. Download Android SDK from here: http://developer.android.com/sdk/index.html
2. Install SDK to C:/, place fastboot.exe and the recovery.img in android-sdk/platform-tools
3. Shut down phone, get into bootloader (volume down + power button)
4. Select FASTBOOT using volume keys, press power button (you are now in fastboot mode)
5. Connect phone to computer, select disk drive.
6. Open cmd, type cd C:/android-sdk/platform-tools
7. now type "fastboot flash recovery recovery-clockwork-4.0.0.2-j_r0dd_mod-buzz.img" (no quotes)
8. Now you should have Clockworkmod installed, but still no root so:
9. Copy su-2.3.6.1-ef-signed to sdcard.
10. Get into bootloader again, select recovery.
11. Select "install zip from sdcard", confirm with trackball.
12. Scroll down to su-2.3.6.1-ef-signed, confirm the install, now you are rooted!
13. Do a nandroid backup from clockworkmod.
14. Repeat steps 9-12 but use the ZIP of ROMs, Kernels or Radio if you wish. Wipe all data before installing a fresh rom (ty calyxim ^^)
Complete list for ROMs/Kernels/Radio here: http://forum.xda-developers.com/showthread.php?t=1029318
I hope this is clear enough?
Click to expand...
Click to collapse
i get waiting for device..... after v long
which drivers shud i reinstall?
and anyway, how to enter fastboot mode? after i select the fastboot mode what do i do? it still stucks at the hboot screen
I am rooted with s-off running on a ATT simcard but still can't boot in CWM recovery. In rom manager it says: current recovery Clockworkmode 3.0.2.4
Whenever I attempt to boot into recovery the MT4G comes up it reboots and it comes up agains and boots regularly. Any thoughts?
I followed all the instructions in this thread and am at the 85.xxx bootloader
http://forum.xda-developers.com/showthread.php?t=858996
I am bone stock other since I've not be able to get into recovery mode. Would a factory reset help?
Do it manually. Go to the bootloader and load recovery from there, or use adb and type adb reboot recovery.
adb does the same thing it attempts to get into recovery then goes blank and reboots regular and same thing with hboot.
Do you have fastboot on?
Nope. Fastboot is off. I can't even factory reset the phone. It just reboots like with everything else
be1ieve1111 said:
Nope. Fastboot is off. I can't even factory reset the phone. It just reboots like with everything else
Click to expand...
Click to collapse
most likely it feels as if the recovery image didn't take.
Code:
adb reboot bootloader
from there select "recovery" and see what boot loader you are using. If you have the engineering screen manually flash it.
http://www.koushikdutta.com/2010/02/clockwork-recovery-image.html
1. Download CWR3. - link supplied above
2. Save to your Android SDK tools (c:\android-sdk-windows\tools) or platform-tools (c:\android-sdk-windows\platform-tools) folder and rename to recovery.img
3. Turn off your phone.
4. Hold the volume down button + power until you boot to a white screen.
5. Use the volume rocker to select FASTBOOT then press the power button to select it.
6. Connect your phone.
7. Open up a windows command prompt and navigate to your sdk tools or platform tools folder. tools (c:\android-sdk-windows\tools) or platform-tools (c:\android-sdk-windows\platform-tools)
8. Type
Code:
FASTBOOT DEVICES
to make sure your computer "sees" your phone and is ready to flash the recovery. You should get a serial number and then the word fastboot as the output.
9. Type
Code:
fastboot flash recovery recovery.img
and press enter. Give it a minute to do it's thing. You should get a message that says writing recovery and success.
10. Unplug your phone and use the volume rocker to select BOOTLOADER and then again to select RECOVERY and you should be booted into the orange menu of Clockwork Recovery 3
Click to expand...
Click to collapse
taken and modified from http://forum.xda-developers.com/showthread.php?t=919834
It says fastboot isn't a recognized command when I type FASTBOOT DEVICES
also for the bootloader part. It loads real quick and it says something about no image or wrong image in the lines of code that loads on the screen then disappears
Are you using Linux? If so, cd to platform-tools and use ./fastboot instead of fastboot. Otherwise try updating adb and see if it works. Also, the random text is the phone searching for PD15IMG or another restore image. Disregard that, unless you want to flash the stock unrooted image.
I'm pretty new here but as I documented the process of modding my own phone I thought I'd share it with you. I didn't invent any of these processes and this information is available from many different sources. I've tried to credit any source material that I've used verbatim. I am by no means an expert.
Please reply back with any corrections and I'll be happy to edit the post.
This guide describes how to take a HTC Desire HD (mine was fully patched with OTA updates including Sense 3.0), unlock it and install CyanogenMod onto it. It worked for me but it might not for you. I don't take any responsibility for you turning your phone into a brick!
Pro Tips
Remember, in any steps requiring the phone to be powered off, just give it a minute to make sure that it is properly turned off.
Understand what's happening! If you get what's going on, you've more chance of fixing it if it goes wrong. This process describes how to use HTCs official method to unlock the bootloader. This allows you to change the operating system on the phone. The phone contains a recovery system which we an engineer can boot into to replace the main operating system if it becomes unbootable. We are going to replace this stock recovery system with a modified one which allows us do fiddle about with the phone's internal partitions. Once we have the modified recovery system in place we use it backup the existing phone operating system and replace it with a modified one. We can also use it to restore the original one again if things go wrong.
Read all of the instructions properly first! Don't go off half-****ed!
As far as I'm aware you can't reverse the official HTC bootloader unlock (i.e put your phone back *exactly* as it was) and it may effect your warranty. You have been warned!
Unlock the Bootloader
INFO: You can use the HTCDEV unlock bootloader method from HTC as an 'official' means of unlocking the bootloader. Confused? Check out the official site: http://htcdev.com/bootloader/ I'm not going to describe it step by step here because HTC do that quite well enough themselves.
Quick tip. If when going from one step to another on the HTC website you come to a white screen, that may be because you've been logged out. Just go back to the first page, log in again, then go back to the last step you completed.
Another quick tip. Make sure you properly install everything HTC tells you to. We'll need it all later...
Installing recovery mode
INFO: The stock recovery mode itself is pretty basic and can't do much, so we need to replace it with a custom recovery image.
We're going to use the clockworkmod recovery image which you grab from here: http://dl.dropbox.com/u/4518713/archive/recovery-clockwork-5.0.2.7.111102-j_r0dd_mod-ace.zip (originally seen here: http://forum.xda-developers.com/showthread.php?t=1118865)
Make sure that the fast boot mode on your phone is disabled. You can find this in your power settings menu.
If the phone is connected via a USB cable then unplug it.
Power off the phone using the power button and leave it alone for a minute.
INFO: To flash the new recovery image to the phone, you need to reboot the phone into the bootloader so that you can select a new image to boot. The bootloader is known as HBOOT.
Boot into HBOOT by holding down the 'volume down' button and pressing the power button.
By default FASTBOOT is selected so just press the power button to access it.
Attach the USB cable and note that FASTBOOT changes to FASTBOOT USB
On your PC open cmd prompt and cd to the platform-tools directory of the android sdk. Mine is at C:\Program Files (x86)\Android\android-sdk\platform-tools>
Copy the .img file from the clockworkmod zip file we downloaded earlier to the platform-tools directory. Rename it recovery.img
Go to your command prompt and issue this command:
Code:
fastboot flash recovery recovery.img
INFO: The recovery image will then be written to your phone, and as long as everything went well you'll get a message saying OK.
Ensure that BOOTLOADER is selected in the HBOOT menu and press POWER button to select it. Now you're back at the HBOOT menu.
Use the volume buttons to highlight RECOVERY and press the power button to select it. After showing you the HTC logo, the phone should boot into recovery mode!
Backing up your phone
Using the volume buttons to select move to the 'backup and restore' option in the menu. Use power to select and use the backup option. This backs up your current phone setup to the SD card.
Select power off to turn off you phone. Leave it a few secs - select reboot system now.
When your phone is backup and running, mount it in mass storage mode and navigate to the root of your SD card. See the folder called 'clockworkmod'? copy that along with everything in it to your computer and put it somewhere safe. That's your backup. If needs be, you can use this backup your phone back to the original state!
Installing CyanogenMod (other mods may vary)
Mostly taken from http://wiki.cyanogenmod.com/wiki/Nexus_One:_Full_Update_Guide with some extra stuff that messed with me when I tried to do it.
Download the latest version of CyanogenMod from http://download.cyanogenmod.com/?type=stable&device=ace
Download the Google Apps for the device. http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
Place the CyanogenMod update.zip file on the root of the SD card.
Place the Google Apps .zip on the root of the SD card also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and the power button to select.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
And the option to wipe the Dalvik cache
Select Install zip from sdcard.
Select Choose zip from sdcard.
Select the CyanogenMod update.zip.
Select Install zip from sdcard
Select Choose zip from sdcard
Select the Google apps zip
These extra steps seem to have been required by people in this thread. All credit due to marsdta and theluckster for their suggestions. I've edited this guide to include the instructions here where they are more visible.
On your computer extract the ROM zip (e.g. update-cm-7.1.0-DesireHD-signed.zip) and there should be a file inside it called boot.img. This should be flashed automatically, however for some reason via the HTCDEV method it is not.
To do it manually, you need to enter fastboot mode, as per the instructions above:
Boot into HBOOT by holding down the 'volume down' button and pressing the power button.
By default FASTBOOT is selected so just press the power button to access it.
Attach the USB cable and note that FASTBOOT changes to FASTBOOT USB
Then on your PC, in the directory you extracted the zip file run:
fastboot flash boot boot.img
Click to expand...
Click to collapse
Once the installation has finished, select Go Back to get back to the main menu, and select the Reboot system now option. The phone should now boot into CyanogenMod.
Now wait for what seems like an incredibly long time with the phone showing the 'htc' screen.
INFO: The phone should now boot into CyanogenMod!
Restoring your phone - When things go wrong
OK, so you flashed a bad mod. Time to restore.
First up, put the backup you made in the previous step onto the root of your SDcard (if it isn't already there). Then, I came across this video which seems to explain things pretty well
http://www.youtube.com/watch?v=mUYGe8mmNWU
The basic gist of it is, boot into recovery mode, format the cache, data and system partitions, wipe the Dalvik cache, then restore the backup from your SD card.
Wow thanks a lot!
I personally have 1 problem:
Step 12 of the "installing recovery mode" when i type in the command in command prompt is says:
'error: cannot load recovery.img'
I placed it in the same folder as fastboot en renamed it "recovery.img".
I unlocked the bootloader succesfully btw..
Any thoughts?
I think you should contemplate using attn1's ace hack kit to gain bootloader unlock instead of voiding your warranty.
Hunt3r.j2 said:
I think you should contemplate using attn1's ace hack kit to gain bootloader unlock instead of voiding your warranty.
Click to expand...
Click to collapse
Well I've already unlocked the bootloader through htcdev.
But tried the Attn1's as well...ended up saying:
/data/local/tmp/goldcard.img: cannot open for read: No such file or directory
starting downgrade...
** The phone will now reboot into HBOOT.
** It will then check the file just sent.
** If everything is okay, the phone will
** prompt you to continue by pressing
** VOLUME UP. It will reboot, flashing twice.
The phone did not prompt me to continue by pressing volume up.
When i start clockwork recovery it states i should root my phone...
So a lot going wrong and i can't figure out what..
how long the htc screen? I'm waiting for a looooong time
Thanks for the tutorial. I've followed the instructions and managed to unlock the bootloader and install ClockworkMod, however after flashing CM7 and rebooting it is stuck on the H3G boot screen (isn't flashing CM7 supposed to overwrite the boot logo?). I'm trying to flash:
update-cm-7.1.0-DesireHD-signed.zip
gapps-gb-20110828-signed.zip
I've double checked /data, /system, /cache and Dalvik-Cache have been wiped before flashing but still no avail
Here are the versions from the bootloader:
***UNLOCKED***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011, 14:28:19
I am able to restore the backup, but flashing any other ROM just doesn't boot.
The guide is missing one key step . Flashing the boot image.
So after flashing your from boot back into boot loader and flash your roms boot.img.(just copy it over to your fast boot file)
Then run the command
Fastboot flash boot boot.img
Reboot . Done.
You'll have to do this every time you flash different roms. 4ext has a nice feature of doing this for those that have HTC unlocked you should try it out
Sent from my Inspire 4G using XDA
Awesome, thanks marsdta! It is working now, good work!
thelucster said:
Awesome, thanks marsdta! It is working now, good work!
Click to expand...
Click to collapse
can you repeat it more clear for me because i have the same problem.
Thank you Thelucster. You have saved me from a big mistake.
crom1 said:
can you repeat it more clear for me because i have the same problem
Click to expand...
Click to collapse
First flash the Cyanogen ROM and Google Apps, as per the instructions above. Then on your computer extract the ROM zip (e.g. update-cm-7.1.0-DesireHD-signed.zip) and there should be a file inside it called boot.img. This should be flashed automatically, however for some reason via the HTCDEV method it is not.
To do it manually, you need to enter fastboot mode, as per the instructions above:
Boot into HBOOT by holding down the 'volume down' button and pressing the power button.
By default FASTBOOT is selected so just press the power button to access it.
Attach the USB cable and note that FASTBOOT changes to FASTBOOT USB
Click to expand...
Click to collapse
Then on your PC, in the directory you extracted the zip file run:
fastboot flash boot boot.img
Click to expand...
Click to collapse
I didn't set notifications on this post and forgot it existed till today. I've updated the guide with the information posted by marsdta and theluckster to make things clearer. Sorry about any confusion caused by missing that step out.
the boot screen shows cyanogen(mod)7 instead of the regular HTC sign!! Following each and every step I landed up here. And now I am stuck, cuz this boot screen has been there for like half-an hour....does it mean something is wrong or does it take this much time to load first???
Hello,
for HTC dev unlocked bootloader (about what is added after step 15 in "installing cyanogen" phase) : it seems that the boot.img must be flashed before installing the .zip from sdcard.
I got stuck for that. Could be worth to make it clear.
Great tutorial anyway, thank you !
zarkenciel said:
Hello,
for HTC dev unlocked bootloader (about what is added after step 15 in "installing cyanogen" phase) : it seems that the boot.img must be flashed before installing the .zip from sdcard.
I got stuck for that. Could be worth to make it clear.
Great tutorial anyway, thank you !
Click to expand...
Click to collapse
It shouldn't matter. I've seen people do it both ways and it worked fine for them.
@ash win. Your in a boot loop. Did you do a full wipe before flashing? Could be just a bad flash. Go back and reflash the rom and boot.img. you should also verify the md5hash to make sure yous didn't get a corrupt download file.
Just finished the tutorial, works perfectly. Thanks for writing it.
Does this unlock you from the network, i.e. is this the alternative to paying £15 for an unlock code?
I do understand this is for modding and flashing to a new ROM, but I am wondering if it also unlocks the phone from your network (or maybe that is IMEI based).
This is not for any illegal purposes, just I fancy a new ROM and I am now out of contract, so happy to experiment with flashing.
ohforfs said:
Does this unlock you from the network, i.e. is this the alternative to paying £15 for an unlock code?
I do understand this is for modding and flashing to a new ROM, but I am wondering if it also unlocks the phone from your network (or maybe that is IMEI based).
This is not for any illegal purposes, just I fancy a new ROM and I am now out of contract, so happy to experiment with flashing.
Click to expand...
Click to collapse
No, you need the aahk for that. That gives you sim unlock as well. Just Google attn1 aahk and you'll find it
marsdta said:
No, you need the aahk for that. That gives you sim unlock as well. Just Google attn1 aahk and you'll find it
Click to expand...
Click to collapse
Thanks - very kind of you to point me in the right direction, I've found it
Hi,
and how do i root my phone after HTCDev Unlock??
I want install the Custom Rom "Sabsa Prime". Do i need root to flash it?
Sorry for my bad english.
You may also want to include wiping battery stats in the advanced option of cwm in your guide
Malfunction " x " appears on the screen !! help me what is going on
Haha... you'll need more information than that if you want real help.
Based on the limited information though I suspect your phone is stuck in a bootloop. I'd hook it up to the PC via USB and check the logcat. Probably something screwed up.. Maybe time to restore your latest backup.
Did you flash any ROM if so, did you clean your Dalvic+REgular Cache
If you don't have an Recovery:
- Connect your Micro SD on PC
- Download and insert on SD the stock ROM of your Nexus One
- Power ON your Nexus with Volume Down Pressed.
- Autmotically Restore Nexus (You should say Yes xD)
At this time, you decide if you want to be root and install other ROM
you better just list your setup info before doing anything
locked/unlocked bootloader
rooted/unrooted
which recovery are you using
what rom are you running stock/custom
what were you doing when this happened
a couple safe things you can do in meantime is to pull battery and reinsert and power on
if it goes back to X, pull battery and DO NOT power on. Hold down the pwr button and trackball at same time and see if you can get into recovery
the third is hold down trackball/vol-/power at same time while X is on screen and see if you can get to recovery that way
if you can't get to recovery you will need to fastboot new recovery, assuming you are unlocked
once you get into recovery do a nandroid if you are rooted
and copy it to pc as a secondary backup
it is possible you may need to try the passimg method in wiki
http://forum.xda-developers.com/wiki/Nexus_One/Guides_&_Tutorials#Unroot_.2F_Restore_your_Nexus
also to do fastboot commands you need usb debugging selected on phone--hope it is
Hello, i have a similar problem with my n1
the phone starts and just shows the nexus X - (waited for 15 min. nothing happend)
i can go to the bootloader / fastboot menu with PWR + (Vol-) but i can not go to the recovery mode. -> the phone reboots and get stuck at the X
the phone is rooted
blackrose / hboot 7.35.5017
radio 5.12.00.08
recovery was ext4
i had a german ics miui rom installed and tryed to install the latest ics miui us rom after it didn't booted the miui us rom i turned the phone off and tryed a few hours later to turn it on to reflash the german ics miui rom.
1.)
i tryed to install a new recovery image ->
recovery-clockwork-5.0.2.0-passion &
recovery-RA-passion-v2.2.1
(still get stuck at the X if i try to go to recovery mode)
2.)
i tryed this one with the passimg.zip but nothing happens if i put in the sd card :/
(with nothing i mean the green text show that the sd card is checking for PASSDIAG.zip and PASSIMG.zip but dosn't found it)
i also tryed:
3.)
erased boot
flash boot from passimg.zip (PASSIMG_Passion_Google_WWE_2.18.1700.1_FRG83_release_signed)
4.)
erased cache
erased userdata
started again with 1.)
5.)
got frustrated and erased system -.-
any ideas?
study it ,thank you
study it ,thank you
Hmm, sorry if its obvious but i have no idea what it could be or what i have to search to find the solution. Would be nice if you could give me a hint. Of course im not asking for a step by step solution. Thank you.
Send from my awesome SE K800i
not sure why you are flashing boot images
do you have a nandroid--copy your sdcard with the nandroid to pc--all of sdcard
are you flashing thru fastboot in command window
did you read my post above on getting to the fastboot screen--can you do that--the one with the 3 androids
pwr/vol-/trackball same time, may take 20-30 seconds
if you can get there, put your recovery image in your fastboot folder on pc, normally tools--assuming you have sdk installed, your phone must have usb debugging checked--I hope
open a command window and change directory to the tools folder or wherever the fastboot.exe file is. Something like:
cd/
cd/ android/android-sdk-windows/tools for me
then on same line type
fastboot devices (it should show your phone H#)
fastboot erase system
fastboot flash recovery recovery.img (or the exact name of the recovery image, checked by right clicking on the img file in your tools folder and looking under properties)
I would use amonra you listed above and check the md5 if possible
hopefully the recovery will flash
if not you can go to the wiki link i posted above and try passimg metthod from there, use correct one. don't add the .zip. Windows will had it automatically.
a side note, DON"T flash different roms without wiping all including System 3 times before flashing--prevents a lot of problems
rugmankc said:
a side note, DON"T flash different roms without wiping all including System 3 times before flashing--prevents a lot of problems
Click to expand...
Click to collapse
thank you very much
i already tryed everything else what you wrote but i didn't wiped 3 times... after erasing recovery partition 3 times i was able to flash a new recovery and it started.
Thanks a lot!
Glad that you got it