Hi! After flash my Acer S200 don't start. Just write : Cleen Boot ACER.
If someoane can help me I waitt your sugestion. Thank's very mutch.
surdu_petru said:
Hi! After flash my Acer S200 don't start. Just write : Cleen Boot ACER.
If someoane can help me I waitt your sugestion. Thank's very mutch.
Click to expand...
Click to collapse
What ROM did you flash? sounds like a bad flash... reflash, or try a different ROM
Hello!
Thank's very much, but how can I reflash if the phone dosen't start?
If someoane have the same problem please tell me how can I reflash the phone. Thank's .
surdu_petru said:
Thank's very much, but how can I reflash if the phone dosen't start?
If someoane have the same problem please tell me how can I reflash the phone. Thank's .
Click to expand...
Click to collapse
you didn't break your device , you can reflash it following the flash instructions included , for an example , in rafyvitto's rom's post .Just have a look there .
surdu_petru said:
Thank's very much, but how can I reflash if the phone dosen't start?
If someoane have the same problem please tell me how can I reflash the phone. Thank's .
Click to expand...
Click to collapse
If it dosnt start by camera press button and hold then reset button(this puts device in bootloader mode) if that doesn't place your device in bootloader mode its brick't, thats is if you have the 1.00 radio.
Hi!
rafyvitto said:
If it dosnt start by camera press button and hold then reset button(this puts device in bootloader mode) if that doesn't place your device in bootloader mode its brick't, thats is if you have the 1.00 radio.
Click to expand...
Click to collapse
Thank's Rafyvitto , but I press camera button end hold reset , the phone don't start, just write in black screen with white : S200_3.003b.00_EN
Clean Boot
acer
end don't work , don't start . I waitt 1 hour but the screen dosen't change , it's the same screen like begining. I don't know what I make , maybe I flesh it with a wrong rom , but now if you know ? it's posibile flash again or make something for start , if the phone don't start? Thank's very much....
You can save it, cause the screen that says "clean boot" is the bootloader, so you just need to press the bootloader combination of the 2.00 radio, press power + volume + camera holding all these press reset, if you see a red led blinking then its in bootloader mode, and you can flash your device.
Hi!
rafyvitto said:
You can save it, cause the screen that says "clean boot" is the bootloader, so you just need to press the bootloader combination of the 2.00 radio, press power + volume + camera holding all these press reset, if you see a red led blinking then its in bootloader mode, and you can flash your device.
Click to expand...
Click to collapse
I will try now. Thank's again.
Hi!
rafyvitto said:
You can save it, cause the screen that says "clean boot" is the bootloader, so you just need to press the bootloader combination of the 2.00 radio, press power + volume + camera holding all these press reset, if you see a red led blinking then its in bootloader mode, and you can flash your device.
Click to expand...
Click to collapse
No, my Acer S200 don't want to start reflash, I try exactaly end the red led is blinking but the all the flash rom don't start....just say update failure veryfi the connection USB. I trying with the Acer_EUU haker version 1 end 2. I thing that the phone is dad. Maybe is another solutions? I waitt...Thank's again, very much.
Heelo!
If you know , maybe it 's an solution for boot the rom on the storage card ? I thing , if the phone don't connect with the pc with usb cable is normaly that the flash don't start, maybe if I put the rom on the storage card then the phone will try to boot on the storage card, but I don't know how to make that. Thank's again.....
Hi!
Greats thank's again Rafivitto! I will try press cammera + volume + power end reset and the phone start the reflash. Merci beaucup.....
Hy all!
I have problem with clean boot logon... I done hard reset and device stuck at Clean Boot logon...
Would like to know how to flash it without activesync? I downloaded OEM ROM just can not install it without the NeoTouche beeing synchronized via active sync...
Please help how to do that without active sync...
Hi!
matjazz said:
Hy all!
I have problem with clean boot logon... I done hard reset and device stuck at Clean Boot logon...
Would like to know how to flash it without activesync? I downloaded OEM ROM just can not install it without the NeoTouche beeing synchronized via active sync...
Please help how to do that without active sync...
Click to expand...
Click to collapse
You need active sync for flash your s200 , so you plug usb cable between pc end phone with micro usb. After that you need to entre in bootloader mode ( for bootloader mode you need press simultanly power , camera end volume end reset while the red led is blinking) . If your led red is blinking then you can start flash rom with any flash , but I recomanded for you an original flash with ACER_EUU.exe hack , not originaly for that just download hack acer_euu.exe end replace it in directory flash rom. If you still can't make the reflash I need to know what is your version of rom? Your version is in the left corner on the first line. See you later....
update failed
Hello,
I wanted to update Neotouch from official rom 2.003.00_de to 3.003c.00_de.
The update failed and when i start the device, now I see on display:
- in the upper left corner: s200_3.003c.00_DE
- in the middle "clean boot"
- under it "acer"
I tryed to go in the bootloader mode:
I removed the Akku for ca. 10sek.
I connected device and PC via usb.
I pressed Volume down + camera buttons together, then the power button and when it starts to blinking the LED red, I press reset with the pen.
The LED is blinking red, but the display is black?
(it is correct?)
Then I started on PC the "EUU_Acer_S200_3.003c.00_DE_03.03.08_3.003c.00_20100205.exe"
...extracting...install prompt...ok...
window: "welcome to the device software update utility" etc. with the notifications to connect
... next..
and then:
"Update failed. The device software utility occurs trouble connecting to your device"
what am I doing wrong?
surdu or other , can you help?
Thanks!
I unpacked the originial
"EUU_Acer_S200_3.003c.00_DE_03.03.08_3.003c.00_201 00205.exe"
and replace the "ACER_EUU.exe" with
File
from this Thread
http://forum.xda-developers.com/showthread.php?t=628402
Then I clicked the "EUUFrontEnd.exe" and the "install prompt" started, then for a second, there is an Error window.
I searched in the posts here in neotouch forum for this problem, but idont understand much and my english is very bad.
Iam only user, I have no background knowledge. Please help me, if you can.
did you bring your device on "flash mode"?
what rom does it have now?
When I bouhgt mine I did excactly the same thing
It had 2.003.... official ROM and I flashed it with the new official 3.003b.....
camera+reset and then the steps as you did.
maybe it's something in the 3.003c drivers and the hacked .exe does not work..
Philippe_Raimo said:
did you bring your device on "flash mode"?
what rom does it have now?
Click to expand...
Click to collapse
1. I do not know exactly...
"I pressed Volume down + camera buttons together, then the power button and when it starts to blinking the LED red, I press reset with the pen.
The LED is blinking red, but the display is black?
(it is correct?)"
Is this really the Bootload Mode?
2. see my Post Nr. 14
Now i can see upper left corner: s200_3.003c.00_DE
maybe it's something in the 3.003c drivers and the hacked .exe does not work..
Click to expand...
Click to collapse
mmh..what should i do...
Hi!
olsching said:
1. I do not know exactly...
"I pressed Volume down + camera buttons together, then the power button and when it starts to blinking the LED red, I press reset with the pen.
The LED is blinking red, but the display is black?
(it is correct?)"
Is this really the Bootload Mode?
2. see my Post Nr. 14
Now i can see upper left corner: s200_3.003c.00_DE
Your phone S200 is not dead, you can save it, but is 2 way from the led red blinking, if your led red is on/off very well then is the bootloader, if the red led is blinking with have a small break (off) then you aren't in bootloader. Then you need press the Volume down + camera buttons + power button + reset with the pen , all the button togheter, while the red led is blinking (on / off) quickly end now you are in bootloader. After that you need Acer_EUU.exe Hack version v1 ( is exactaly - 3.432.960k ) .Just replace it end go. Good luck!
Click to expand...
Click to collapse
Hi Olscing! again
from this Thread
http://forum.xda-developers.com/showthread.php?t=628402 you download Hack v2 is no't good for you. You need v1 end the Acer S200_2.003.00_EN.
neotouch is running again
Thanks for your help surdu!
But now i could help myself
I flashed a customrom here from the forum. It stopped at 99,2%!
But the device was able to start and the rom runs.
Then i started the official acer update again and without problems it was installed. Now i happy again!
hey guys just need a little help , today i just searched for the update on my new galaxy note and luckly gote one update for my mobile, i updated it through my wifi and the option appeared for rebooting the phone , i clicked ok and frm then my mobile is not starting, it just gets stuck up att the starting of Samsung galaxy note GT- N7000. guys plzz help i dont wana loose my new cell phone , rply soon plzz . what to do .
Try removing battery once....
Its strange.
Even i am also downloading the update.
Scared
hey i tried removing battery but its still the same , still at same condition at the starting galaxy logo .:--(
dont pull out ur battery just yet. wait for at least 10 minutes. make sure u also have eniugh battery. plug it into the charger to be safe.
Sent from my GT-N7000 using XDA
And don't panic..
Your note is in guarantee period...
yeah i have kept it in charging mode only and it has been on charing mode frm last 2 hrs, yet not progressed .shuld i try flashing original roms via odin method ??? really worried a lot .
Is it ota update or you are updated by odin?
no its by ota only, the one which u get after searching for the software upgrade in the phones setting .(search for upgrade option)
Is recovery mode working?
how to use recovery mode i have't connected it to my pc yet, can u tell me plzz new here . (i have not used kies for the update)
Press and hold volume up+ home + power key at same time.
what will this make upto, i pressed as u said little diffrent screen appeard with the android logo of green colour and phone back in same condition now , what shuld this recovery made to do ,??
turn phone off, then press and HOLD (until you see recovery screen) volume UP
+ Power + Home-Button! In recovery menu select wipe data/factory reset. Than reboot.
Hope this helps...
In recovery menu use volume up and down keys to scroll and home key to select...
tried this as u said but no options available here note goes back to the starting logo and stps der , :-(
Try volume down *home + power key....
Its download mode....
If you can go to download mode and manag to factory reset and or wipe data than i hope you will able to get your phone reboot successful....
Keep trying volume up + home + power....
yeah tried this (dwnld mode) a green android logo has appeard with dwnloading written in the center , what is this dwnloading now??? what to do next mate??
pranil.h.kadam said:
yeah tried this (dwnld mode) a green android logo has appeard with dwnloading written in the center , what is this dwnloading now??? what to do next mate??
Click to expand...
Click to collapse
Actually first try to reset and wipe by recovery mode.... Volume up+ home + power..... Its much simpler.....
Only if this method not work than you should try downloading mode.... Its complicated method.... You need to get expert advice for that...
Maybe OP is busy . Let me update the thread.
Problem solved.
Samsung service center updated his SGN free of charge.
(he updated me by PM)
Sent from my GT-N7000 using xda premium
HI ...
Pls I need your help ....
I have enterted to service menu 3845#*802# The first option was test device ...
I entered it and now I am stuck Test device Mini Os 3.0 and I cant get out ....
Reboot also enters to the same strange test device screen
how can I get out ?
Pls Help
smarty99 said:
HI ...
Pls I need your help ....
I have enterted to service menu 3845#*802# The first option was test device ...
I entered it and now I am stuck Test device Mini Os 3.0 and I cant get out ....
Reboot also enters to the same strange test device screen
how can I get out ?
Pls Help
Click to expand...
Click to collapse
Either long press power button or long press power + volume down(long = loooooong)
i did try it
it reboots to the same screen
Tried factory reset ? Last resort - flash kdz.
Sent from my LG-D802 using Tapatalk