[Q]Having trouble restoring stock rom - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

I've used WP7 for a couple weeks, but somehow the touchscreen stopped working.
So, I decided to restore stock rom and go to service center.
However, it cannot be connected to the computer.
I went to USB Flasher mode, and then connected USB cable to computer and run RUU as administrator, but it shows "ERROR(264): connection."
I am using MAGLDR v1.12.
I really need to restore stock rom asap. Could please somebody help me?
Also, I've heard I need to install original SPL. Where can I find that?

Self answer: I should have gone to bootloader screen, not usb flasher mode.. Problem fixed.

Related

big problem

so I installed the nandroid rom and my calls where getting messed up. I cant do a hard reset. It will say its done in a second and dose nothing. tried a hard reset in the sd/phone settings and just rebots the phone. So I cleared all the data I could. My calls work now but my vpn password has been ereased and i dont know it. I do have the phone synced up to the pc, disk drives where installed. Now i tried to reinstall the rom and it says usb fail. Tried to use custom RUU and that says usb failed. I tried every thing I could think of and nothing will go through. Please help I have no idea what to do.
How are you exactly trying to reinstall it?
I tend to do all my flashing via bootloader (holding volume down upon start/restart) and have never had an issue.
Give us a step by step guide as to:
A. What are you trying to flash
B. How are you trying to flash it
well im trying to install any rom right now. I have the MDJ_FroYo_Revolution rom right now. I did the MAGLDR and tried it again and dose it in 1 second. In the MDJ file it has DFT android install and that says it cant find the usb, even on the boatloader screen. the boatloader screen dose see the usb. I tried the custom RUU (PDA Phone ROM Update Utility 3.27.4.3) that cant find the usb. Tried this in boatloader to.
Now I do have the phone synced with HTC sync. Windows mobile will not read the phone. But the computer dose find the phone and has it with its drivers. So what do you think i should do.
If you're trying to flash again using a NAND android build you need to hold the power button when turning on to enter the MAGLDR menu, then select usb flash. Connect your usb then run the daf.exe, that will reinstall for you if I understand this is what you're trying to achieve.
Yes that is what im trying to do. The android flasher mode reads the usb but the DFT dose not. It gives me,
Error USB init failed
INFO: \RSPL\RSPL.cpp (723)
Thats what it gives me in any mode I put the Phone in.
fastenhard said:
Yes that is what im trying to do. The android flasher mode reads the usb but the DFT dose not. It gives me,
Error USB init failed
INFO: \RSPL\RSPL.cpp (723)
Thats what it gives me in any mode I put the Phone in.
Click to expand...
Click to collapse
Check the following thread, should solve your problem and have you back on your way to more happy flashing.
http://forum.xda-developers.com/showthread.php?t=895655

[Q] No USB connection between my HD2 & my computer

I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
do you have tried to start and hold volume button... than connect to usb and simply install a stock rom (for example from your provider) - this must work... if not - you have bigger problem.
muhanad said:
I have HTC HD2,I was trying to upgrade to Android, I think I made a mistake I installed “MAGLDR113” before upgrading my Radio to version 2.15.50.14. After I installed MAGLDR113 I connected my phone to my computer and the telephone was stuck in boot mode and was never able to see USB connection. Now my computer does not recognize my phone anymore and I can’t flash a new Radio version since I have no connectivity to my computer. I tried several things but all was useless. Can anyone help me telling me how I can have a USB connection to my computer??
Thank you.
Click to expand...
Click to collapse
Answered so many times. turn your phone off then turn it on "while holding volume down.It will then take to bootloader(rainbow screen).It suppose to have a cotulla written above the rainbow screen.Now flash it with a stock rom came from HTC site..No need to sync your phone to your PC..Just flash it..Start all over again..Now you can search before doing somehing with your phone.If that didn't help you. You have a bigger problem..
Yes I tried this also but it doesn't work.
What didn't work? Can you boot into bootloader - ie switch off, press and hold vol down button and switch phone on.
You should then boot into a multi-coloured screen and should see "serial" at the bottom of the screen.Then connect device to usb port (preferably one at back of your pc and a different one that you haven't used before if possible) - let the drivers install if applicable - does "serial" change to "usb"?
Do wat d above posters have suggested then try different usb ports or even a different windows pc...For all we know, your usb cable might be faulty....Also did u perform HARDSPL before anything else?
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
try plugging the phone into a different USB port it should work then...
Tried that all day and it said couldn't install drivers, then just tried the same ports now and its worked. I think it was mobile device center had 2 set-ups for my phone, i deleted the older one and all seems fine now.
This is crazy, now i'm stuck on magldr and won't find usb.
I'm leaving nand now cos i'm close to smashing my phone to pieces, magldr usb flasher will not find the connection no matter what i try, so i'm staying with ****ty windows mobile. Not happy but i've been trying for days now.
Smoke74 said:
I've started experiencing this very same thing. HD2 wont regognize usb connection while in bootloader screen. I get the usb connection sound but never says usb at bottom of screen like it used to. I've been trying android builds via sd but wanted to try my first flash but cant even instal MAGLDR cos it just fails at bootloader cos of no connection. Has been driving me wild for 3 days now.
Click to expand...
Click to collapse
I am experiencing this exact same problem. Bootloader wont recognize the USB stays in SERIAL. Tried different ports, cord is fine. What is the problem.
Before this, my HTC HD2 would just hard reset on its own ONCE A DAY! Why was it doing this?
Now it gets stuck on the white HTC loading screen. Wont get passed it. I used to be able to hard reset by doing the volume keys down and reset but NOPE... still wont load past that white screen.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
h.nocturna said:
Have you guys tried deleting the drivers using a utility like USBDeview? Try deleting anything that relates to HTC OR HD2, replug the phone in, re-install the drivers.
Click to expand...
Click to collapse
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
taha23 said:
IDK what USBDeview is.
Im in Safemode so no drivers load up... because it didnt work in Normal mode. Still nothing
Click to expand...
Click to collapse
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
h.nocturna said:
Of course it won't work without drivers. The computer needs drivers to communicate with the phone. In normal mode, unplug the phone, Google the application, download it, open it, click everything that has HTC or HD2 in it and click uninstall. Plug the phone in, let the drivers install themselves again. Try again.
Click to expand...
Click to collapse
Ok... i rebooted into Normal mode, downloaded the utility, did a search for "HTC" found nothing, did a search for "HD" found nothing. So i am now installing windows mobile center for windows 7 which should have the appropriate drivers.
Install Windows mobile device center 6.1, problem solved.
Sent from my HTC HD2 using XDA Premium App
I'm able to view through USBDeview that my HD2 is connected, however I'm unable to view/open it.. I screwed up by naming the 'temp' folder to 'copy_to_sd_root'..
The instructions confused me. I figured this was the folder that needed to be copied to the sd root... however when i rebooted the phone, I was unable to access it. Any recommendations?
SOLVED
I was overlooking the USB Flash option.
If you are still having problems, let your phone turn on(no multi-color screen), select: USB Flash, click the DAF.exe installation file, follow the prompts.
You're done.
I had this problem and I solved it disabling an option in activesync. I can't remember what was exactly the checkbox, but was in "options" and it said something like "allow usb connections" or something like this.
I just disabled it and rebooted the device holding volume down.
Good luck!
Make Sure Phone is not connected to PC
Goto cotrol panel in windows
Uninstall HTC BMP USB Driver
Uninstall HTC Driver Installer
Uninstall HTC Sync
Unisntall Windows Mobile Device Center
Restart the PC
start the phone holding power and vol dn and now connect the phone to PC. should detect and install the drivers and you should be able to see USB on phone screen.
if this does not work
Delete all the USB root HUB but keep as last option in device manager.
PS: This will cause ALL the USB devices to redetect.
Let me know if this works

[q] help please

I tried to reinstall an android rom on it and for some reason it keeps looping and the computer will not recognize it. I am able to get on MGLDR but the computer will not find my phone. Please I need hel I've been trying to fix it for the last 5 hrs.
If you still can have acces to th MAGLDR, just do the process again and re-flash your ROM... Do a full wipe before and all is gonna be fine
The problem is that the computer don't find my phone. I've tried everything I've found on the forum and still can get it to find it.
mtorr69 said:
The problem is that the computer don't find my phone. I've tried everything I've found on the forum and still can get it to find it.
Click to expand...
Click to collapse
Maybe you need the ADB drivers. Does it detect the phone in USB storage mode? Flash mode? Have you installed clockwork recovery? Can it detect the phone in that USB storage mode? Did it work before you made changes to the phone or is this your first Android flash?
Why don't you task29 your phone, install MAGLDR, throw a 150MB recovery image on, stick a recovery ROM on your SD card and flash again?
the computer does not detect the phone at all. It did work before I made the changes. It is my 2nd flash. and the problem is that the phone keeps looping after I boot from nand, iget the 123 and the gogogo and then reboots again
mtorr69 said:
the computer does not detect the phone at all. It did work before I made the changes. It is my 2nd flash. and the problem is that the phone keeps looping after I boot from nand, iget the 123 and the gogogo and then reboots again
Click to expand...
Click to collapse
Try to boot by pressing volume down and power. Then you will get to the tri-color screen. Plug in the USB cable and wait for a connection. If your computer doesn't even recognize it there, then you're really f***'d up, I would mean..
Edit: Or you didn't install the active sync drivers that SPL and your computer need to communicate.
JanssoN said:
Edit: Or you didn't install the active sync drivers that SPL and your computer need to communicate.
Click to expand...
Click to collapse
His suggestion of this being his second flash lead me to believe he's done that bit already.
I would have to say at this point it's either your desktop PC/Laptop or the cable.
I have a dodgy cable, sometimes when I "think" my phone is charging it actually isn't, even though the LED and OS tell me it should be.
Also my Laptop point blank refused to detect my HD2 a while ago.
Recommendations:
Try same cable in a different PC.
Try new cable in same & different PC.
If your work computers are on lockdown, you can at least take the cable there with you and see if the Administrator policy window pops up to tell you you're not allowed to install new hardware. That way you know the phone and cable are fine.
dkl_uk said:
His suggestion of this being his second flash lead me to believe he's done that bit already.
Click to expand...
Click to collapse
Yeah, you're right
Maybe it is also the port on his device, my port seems to have a loose connection too as it is not the most stable anyway..
Thanks everyone. I downloaded a recovery program on my SD card , rebooted and flashed again. Thank You very much for all your help.

Can't Task29 or flash with USB - wtf?

Hey guys, for some reason I'm unable to perform a Task29 or flash anything from MAGLDR 1.13's USB flasher mode.
Here's what happened.
I was using CMYLXGO's stock Desire HD ROM and having data problems, so I tried to change my kernel to Tytung's using CWM. After I did that, Android stopped booting - kernel load fail. I don't know how to fix that, so I figured I'd just do a clean install.
When I tried to do a Task29 from the 3 color screen, I get stuck at "Verifying information from your PDA phone..." It then tells me it can't establish a USB connection. I ran the program as administrator.
Okay, I said to myself, I'll try reflashing CWM from MAGLDR's USB Flasher. I got "Wait USB... USB." and tried, but DAF.exe also told me it couldn't establish a USB connection.
I know the USB connection is working, because I've tried it with two different cords and reformatted the SD card through MAGLDR's USB mass storage mode, which still works.
Can anybody help me out? Currently I can't boot android, don't have windows mobile and am f**ked...
Thanks,
Zuka
I think I've solved it, if anyone else is having the same problem. I believe it's because I uninstalled Windows Mobile Device Center when I moved to android full time.
EDIT: That was in fact the problem. Hint: NEVER UNINSTALL MOBILE DEVICE CENTER
zukа said:
I think I've solved it, if anyone else is having the same problem. I believe it's because I uninstalled Windows Mobile Device Center when I moved to android full time.
EDIT: That was in fact the problem. Hint: NEVER UNINSTALL MOBILE DEVICE CENTER
Click to expand...
Click to collapse
Yes WMDC and ActiveSync have the USB drivers for your HD2 will it is in bootloader, hence no connection via USB as you have no USB drivers for bootloader. Glad you figured your problem out and posted it back here for others to see. Too bad I did not see your threadcearlier as I may have been able to say you a little stress.
Haha, I appreciate it, but when I tried it on my housemate's computer and I saw "Windows Mobile Device Centre installing..." I knew how I'd messed up. Thanks anyway, hopefully this can serve as a reference thread if anyone googles and comes up short.

USB problem

Hello,
I have D802. I was on stock 30A, with dorimanx. Phone wouldn't charge while in system, so i charged it while off. I thought it was a rom problem, so I went into recovery and wiped everything. Now I don't have rom to boot.
Problem is, OTG doesn't work, TWRP can't recognize it. I can't connect the phone to the PC because it doesn't detect it. I tried multiple USB-s and multiple PC-s. Nothing shows in the device manager, no ADB, no mount, nothing in download mode. My best guess is that it is a hardware problem. Anyone had the same issue? Do I have to send it to repair?
mind_challenge said:
Hello,
I have D802. I was on stock 30A, with dorimanx. Phone wouldn't charge while in system, so i charged it while off. I thought it was a rom problem, so I went into recovery and wiped everything. Now I don't have rom to boot.
Problem is, OTG doesn't work, TWRP can't recognize it. I can't connect the phone to the PC because it doesn't detect it. I tried multiple USB-s and multiple PC-s. Nothing shows in the device manager, no ADB, no mount, nothing in download mode. My best guess is that it is a hardware problem. Anyone had the same issue? Do I have to send it to repair?
Click to expand...
Click to collapse
I had this issue a few days ago and fix using this http://forum.xda-developers.com/showthread.php?t=2797190 tutorial.. you will go back to stock rom 4.4x but your g2 will also return to live.
*press volume up button before connect usb on you pc
** you can get used files here http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/
*** sorry for my bad english
terrs said:
I had this issue a few days ago and fix using this http://forum.xda-developers.com/showthread.php?t=2797190 tutorial.. you will go back to stock rom 4.4x but your g2 will also return to live.
*press volume up button before connect usb on you pc
** you can get used files here http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/
*** sorry for my bad english
Click to expand...
Click to collapse
I tried that, as I said, but the problem is, no PC recognizes phone, I tried on two different PC-s. Only charging works, no USB connection, no OTG, nothing but charging.

Categories

Resources