I have tried numerous sip clients and all of them have the same problem... i.e. no sound when a call is in progress. It is probably a setting issue but can anyone help me please? I have dialed out with Skype with no problems. Normal calls no problems either. Just SIP calls.
Thx.
Adrian
CSipSimple works perfect for me. IMO it is the best out of all on the market.
I have used it, but it is has the same problem, no sound. Sipdroid seems a lot more stable and less FC.
Related
hi,
i can't seem to get it working. people can hear me, but i can't hear them
Anyone got this working?
Thx
it should work, i have not tested it but it should work, the files and registry entryes are taken from a hermes rom for which i am sure that it work and it is the same core and build as ours
i was able to launch the setup earlier... and decided to do it later on..
but when i tried after 2 days ... it just crashed...
did uninstall... softrest... install.. routine few times... and gave up.
I successfully connected to my Hungarian Voip provider (megafone) but no sound at all. Dialing is okay, but I cannot hear it ringing out, cannot hear the other party, they can't hear me. However the connection is there and the connected seconds are charged.
GSM phone, Skype and Fring are working well, only the Ms Voip has problems.
My settings look like this. The 'Dial plan' tab is empty. Is this normal?
Also noted that it didn't terminate the call normally as I pressed the red button, it kept charging on for 15 minutes of talk...
well now i think that something is missing, maybe audio encoders and decoders on which VoIP is dependant, i will look into this and will keep you posted
My tip is also codec-related.
Is it normal that via ActiveSync the voip says No Service? With WiFi it says Available, I think it should also with ActiveSync.
are there any news?
I don't have an issue with VOIP working on my SX66. In fact, I was surprised by how easy it was to get going.
-Chris
You were lucky that your provider uses the same codec as this WM6 build does.
Since I don't use something like Vonage, or Comcast VOIP, I just went out and found a VOIP provider online. VOIPCheap.com works great with this build.
-Chris
Many of us prefer a local VoIP provider though.
VoIP Incoming RTP
Some additional info on the problem with receiving audio. (same is on my phone). I checked which codec this SIP stack negotiates.
Apparently, out of all available, MS VoIP settles either on PCMA or PCMU depending on the other end availability, and refuses other most common ones.
Well, it encodes and sends RTP which I receive on other non wm6 phones and I am sure it receives RTP, and may even decode it, but by the look of it, not a squick is sent to the hardware/speaker.
Cheers
===
Sorted by installing Voip support from (ftp://xda:[email protected]/WM6VoIP.CAB)
and installing on top of the existing (from voip.cab - can't remember the source).
Although the dialplan tab is still blank (requires ipdialplan.xml, I guess) but the SIP settings are remain intact after this 'patch'.
====
I've just tested the MS voip with 3 different VOIP providers, and I also have the "sound" problem with it.
When I use an other VOIP application (like SJphone) all is working fine, so it must be a codec problem that is missing.
I just looked at VOIPCheap.com website. It's sounds interesting. Never tried VOIP from BA. Can someone tell me what i need to do to use VOIPCheap.com on BA to make VOID calls apart from creating an account with VOIPCheap.com? Thanks guys.
Never Mind. Please ignore my last msg. I think i got the answer on there website in FAqs. I'll create the account and see how good it is.
Anyone have any good/bad feedback for VOIPCheap.com service?
Thanks.
There are a lot of threads for VoIP problems in the forums many issues are solved there, i suggest al of the VoIP users to search and read there. Also i understood that difrend providers use difrend encoding-decoding so thats why it works for some and not for everybody
did someone find a fix for the muted audio issue?
i've read many threads about many voip issues on the other forums available here, but it seems like the small amount of ppl who had this problem was left quite alone..
I'm trying to place calls via my asterisk 1.4 box.
thanks
Last weekend I setup fring on my touch HD and signed up for voipdiscount as a SIP provider and everything was working fine and I successfully made a couple of SIP calls. However, for the last couple of days i've been unable to make a SIP call with the number going to the dial screen and then immediately saying call ended up. I initially thought that it was a problem with the provider, but SIP settings from another provider also provide the same results.
Has anyone got any ideas as to why this might be so and what I can do to fix it?
Many thanks
Spud
hmmm... not good, skype calls via fring are now demonstrating exactly the same behaviour.
Anyone else having trouble with fring?
Hello guys! I have been trying to make internet calls with my new HTC HD2, and so far I have not managed to make it work properly.
Actually after testing PortSip I almost got it, but the problem I have with this software is that my voice is not being heard at all/clear enough. I can hear the person I'm calling very well, without delays, but they can not hear me. I tried using BT headset, normal headset, and without headsets for the same result, not being heard.
Could it be that the microphone is set too low? is there any way to increase it?
Any help would be appreciated.
Thnx.
I use PortSip without any such problem....
Try fring as an alternate solution...may work for you...
Are you connecting to your own VOIP server? If so, make sure that the correct ports are open.
I had the same problem with portsip. I find Agephone to work nicely, only problem with it not being able to direct sound to the earpiece so you will need some software that does that instead.
After a lot of testing, I'm still in the same situation. I'd be great to make voip calls to work. I am certain there's some settings in windows mobile (codecs maybe) that my voip provider don't like, and therefore calls drop.
My voip provider is Saunalahti (Finland) which actually rents the gsm network from Elisa.
I am trying making calls from two different voip accounts, calling other voip numbers and normal gsm numbers. I am using one HD2, one TYTN and a Softphone that Saunalahti offers.
The only way that the calls work is calling from the softphone in the PC, no problem there. I have audio both ways and calls do not drop.
If I call from:
wm to PC, call drops (lasts 2 sec)
wm to wm, call drops (lasts 2 sec)
wm to gsm, connects but the other person can not hear me
One wm is using 3G and the other is using WIFI. port 5060 is open in the registry.
Like a said earlier, I have tried different programs, but it's the same scenario.
Any idea on what the problem actually is? thnx i nadcance.
Hi guys,
I am interested in VoIP calling with my HD2. I don't know much about this, and I would like to be able to use it when I travel to Mexico next month. I know that Blackberry's have UMA technology or soemthing like that to make WiFi calling for free back to the states. Will this PortGo/PortSip program do the same thing if I use the free version, or buy the Professional version?
האם אפשר לקבל עזרה בעיברית להפעלת voip
gorelshv said:
i had the same problem with portsip. I find agephone to work nicely, only problem with it not being able to direct sound to the earpiece so you will need some software that does that instead.
Click to expand...
Click to collapse
האם אפשר לקבל עזרה בשפת הקודש?
This is my first thread. So Mods, please feel free to bump if necessary. Apologies in advance. May be relevant to other WM devices as well.
Still a noob, and am hoping this post can help others at same experience level. Tried solutions such as Fring, Internal WM VoIP, AutoAudioRoute, etc but could not get a working solution. Don't know how to flash a new ROM yet, so not an option. Thank you to developers and posters here whose work and experience have helped greatly.
In short, what worked for me was a combination of Teksoft's AudioRoute, AgePhone Mobile (softphone) and Google Voice (sorry, only US).
My quest: To turn my old HTC Titan into a VoIP over WiFi with automated speaker switch. Free is best, but willing to spend a little if I have to.
My phone: A former Sprint Mogul 6800, no longer active, so no plan whatsoever. WM 6.1, Stock Sprint ROM 3.56, Radio 3.42.
Was using Teksoft AudioRoute, but had to manipulate manually for each call, because for outgoing calls if speaker switch occurred before other party answered their phone - no outgoing audio.
Tried AgePhone Mobile softphone. They have a settings option that can execute AudioRoute speaker switch by command line. Execute on (call) Connect "-earpeice" Execute on Disconnect "-backspeaker"
However on outgoing calls, switch occurred too early, killing outgoing audio.
Was looking into a Google Voice number, when I read that the way it works, outgoing calls ring back to the phone number that you're forwarding calls to. Tested with AgePhone Mobile and success! Outgoing Google Voice call rings AgePhone, which switches to internal speaker when I pick up, then completes the call to the other party.
So for my phone at least SIP Provider w DID number + AgePhone Mobile ($35) + Teksoft AudioRoute + Google Voice + Google Voice Dialer = fully working, automated, speaker appropriate VoIP WiFi phone.
So, a relatively cheap solution but not free and only works for US users, but I hope this info might help out someone else.
Add Ons:
Free Google Voice dialpad: iDial (and iContacts)
I chose OneDialer instead ($7) because of integrated Google Voice SMS client - Free SMS!
hey guy
Why is there is not skype available in market?
Is it because no support on honeycomb
I've got it installed. Didn't do an thing but search Skype
Thanks.. I manged to get skype installed from the skype website.
however i found that when i call the echo test to make a test call. My voice is very poor. Could hear lot of noise that device records. Has any one notices it?
I am pretty sure that its not my internet connection, as if i do a test call from PC it works like a charme..
I just tried it once and it wasn't great. GTalk works better.