Help for a friends fascinate. - Fascinate General

So I got this email from my friend and am not sure what to tell them. I have not run into the screen she describes.
Here's what was told to me.
"He put a rom on it and it forced closed when you tried to open the contacts or do most anything with the phone. He booted in recovery and tried to update zip and it kept saying file not found. So he deleted update zip and kept CWMfroyo zip. But the phone kept saying the same thing then when trying to turn on phone the samsung would loop. Used odin to try and put update zip back on and then the ebo1 modem. Nothing changed. So we tried to factory restore phone by using odin and none of the downloads would complete. Now my facinate only comes on to a screen with a little phone and a computer with a yellow triangle in the middle of the two. It also will not go into download mode anymore."
I replied back asking if they could still enter stock recovery. But haven't heard back yet.
If I can get them into download mode I can help them Odin correctly to get them back good. But, again, I have not seem the screen described so I don't know what it means.
Thanks in advance for any help.
Sent through mental telepathy

Symbol means corrupted os. Reflash.

jenisiz said:
Symbol means corrupted os. Reflash.
Click to expand...
Click to collapse
Reflash what?
Tar files in Odin or zip files in recovery ?
Sent through mental telepathy

Mean Sixteen said:
Reflash what?
Tar files in Odin or zip files in recovery ?
Sent through mental telepathy
Click to expand...
Click to collapse
Reflash stock DL09 files with full package using odin. (If he can get into download mode)

Kaze105 said:
Reflash stock DL09 files with full package using odin. (If he can get into download mode)
Click to expand...
Click to collapse
Precisely. Symbol means the whole os (operating system) needs to b redone.

Since she says they can't get into download mode. Is there something else I should check?
Or are they just doing it wrong?
Sent through mental telepathy

Mean Sixteen said:
Since she says they can't get into download mode. Is there something else I should check?
Or are they just doing it wrong?
Sent through mental telepathy
Click to expand...
Click to collapse
Confirm they are properly trying to get into download mode.
1. Open Odin (might as well)
2. Remove battery.
3. Hold Volume down key.
4. Plug in USB cable.
In your first post, you said that they tried to odin back to factory setting, but the download would not complete. What do they mean by the download wont complete? (Odin wont complete? Cant download full package?)

Kaze105 said:
Confirm they are properly trying to get into download mode.
1. Open Odin (might as well)
2. Remove battery.
3. Hold Volume down key.
4. Plug in USB cable.
In your first post, you said that they tried to odin back to factory setting, but the download would not complete. What do they mean by the download wont complete? (Odin wont complete? Cant download full package?)
Click to expand...
Click to collapse
I wish I knew more. I am trying to help remotely
It would be much easier if I could try to help in person.
Thanks for the help.
Sent through mental telepathy

Related

[Q] DK28 back to DI18

I followed the instructions on how to flash to DK28 and now want to flash back to DI18. How do I do this? If I don't do this will I still receive the official upgrade OTA from Sprint?
Search the threads. There is numerous threads that already cover this.
Sent from my SPH-D700 using XDA App
Thanks
Sent from my SPH-D700 using XDA App
make sure you have samsung mobile phone drivers .download odin, download the di18 tar file....when you open odin place the tar file in the pda section uncheck f.reboot box and put the phone in download mode be holding down the 1 on the keyboard and press the power button...you should have a giant triangle with the android mascot shoveling, connect the phone to the computer and it should show the phone in one of the comm ports (its yellow) after you have done all that, press start.
Does this erase all your data? Recommend backing up beforehand?
yes it does erase data...i didnt do a backup because i didnt mind reinstalling apps
No need to Odin. I got the stock di18 zip, wiped and flashed it via the volume down/cam/power button thingy. Rooted that and restored my cwm backup. Was like I never left 2.1.
do you have a link to that di18.zip?
vyslouzil said:
do you have a link to that di18.zip?
Click to expand...
Click to collapse
http://www.sdx-downloads.com/devs/noobnl/stock.epic.DI18.rom.update.zip
Original post:
http://forum.xda-developers.com/showthread.php?t=786266
Forgive My Brevity. To Be Or Not To Be...
I'm not rooted at all is there anyway just to power volume down camera flash back to DI18? I'm a noob and would most likely need step by step instructions lol
LordLugard said:
http://www.sdx-downloads.com/devs/noobnl/stock.epic.DI18.rom.update.zip
Original post:
http://forum.xda-developers.com/showthread.php?t=786266
Forgive My Brevity. To Be Or Not To Be...
Click to expand...
Click to collapse
Awesome, thanks! Time to do DI18 > to that OTA froyo leak
tphillips78 said:
I'm not rooted at all is there anyway just to power volume down camera flash back to DI18? I'm a noob and would most likely need step by step instructions lol
Click to expand...
Click to collapse
If you're not rooted, then just rename the file to update.zip, copy over to sd card, boot into recovery and flash the di18.
Forgive My Brevity. To Be Or Not To Be...
LordLugard said:
If you're not rooted, then just rename the file to update.zip, copy over to sd card, boot into recovery and flash the di18.
Forgive My Brevity. To Be Or Not To Be...
Click to expand...
Click to collapse
Please forgive my stupidity but I tried just doing the power+camera+vol down and install update but that did not work. Is there a different way to do recovery?
I'm sorry to get pushy but I've been trying to do this all day and I just need a few simple questions answered:
1) Is there some special way for me have the phone set up to use the oneclickroot exploit?
2) How can I avoid the error "E:Signature verification failed" when trying to apply the updates I've found around the forums?
3) Is there a special way to boot into recovery mode to 'flash'?
Basically I need just ONE of these answered. PLEASE HELP.
tphillips78 said:
I'm not rooted at all is there anyway just to power volume down camera flash back to DI18? I'm a noob and would most likely need step by step instructions lol
Click to expand...
Click to collapse
Here you go:
http://androidforums.com/epic-4g-su...-help-going-back-di18-eclair.html#post1970479
So I did this then booted up and android processes kept FCing (non-stop) so I removed the battery to do a hard reboot and now when I try to boot up it just freezes on the "SAMSUNG www.samsung.com" screen. Am I bricked? And if so can it be fixed? If not think I can still bring it in under warranty and falsify my way into a new phone?
http://www.youtube.com/watch?v=RBDFZEQLCQs
Watch and listen to this video. It's a real help trust me.
LordLugard said:
http://www.sdx-downloads.com/devs/noobnl/stock.epic.DI18.rom.update.zip
Original post:
http://forum.xda-developers.com/showthread.php?t=786266
Forgive My Brevity. To Be Or Not To Be...
Click to expand...
Click to collapse
The rom link is broken, does anyone else have this file?

Odin does not recognize my vibrant

Ok here's what happened. When I flashed Nero v4, I rebooted into recovery and flAshed 2.2 stock kernel and jk6 modem without knowing that voodoo has been enabled. So I can get into recovery, but only the stock recovery not clock work. Also I'm using Odin v1.7 and Odin v1.00. Also when I put my phone in download mode Odin does not recognize it. By the way it sometimes recognizes it on the samsung boot screen. So what's the problem with this thing? I am SCARED!!!!!!
make sure ur fone is in download mode then unplug it from the usb and restart odin, then plug it back in.. if you can get to stock recovery then try using adb or something to install the clockwork recovery update.zip to your phone
This may be something you have done, but just in case. Do you have kies installed? Or at the very least the drivers?
I have also had times (today as a matter of fact) where I put it in download mode but the PC didnt make the eject/connect noise. I had to restart the phone again and put it in download mode again. (if you only unplug-plug in it may work, but its 50/50 chance itl just freak out)
I keep a copy of kies on my SDcard just for situations like today.
Ok seeing as I had this problem a few weeks ago ill just share my solution, in the case of windows 7. If you have windows 7 right click on odin and click compatability, then roll it back to windows xp sp 3. Next run odin in administrator mode. Next, when you power down your phone, connect the usb cable first, then quickly hold volume up and down, and don't release them. don't worry if it doesn't connect, because I usually have to do this 4or 5 times. Run your pit and ROM and click start, and its my experience that letting go of volume up and down will disconnect odin. I hope this was helpful just trying to be a productive member of the community.
Odin was able to find my vibrant, but when i press "start" the process gets stuck on "analyzing files..." and nothing happens. By the way, I'm trying to go back to stock ji6 from Axura. I'm new at this. I was able to root my vibrant and get Axura on it, but i need to do a warranty exchange on my phone, so have to go back to stock because I don't think they will cover it otherwise. If there is an easier way to go back to Android 2.1 ji6, please let me know. So far Odin is not processing it...please help
I was had similar problems as well and it turned out fine. See this link at reply #3 (mine). The final issue for me to overcome was to make sure I had the proper .tar and .pit files as well as the updated samsung drivers. I include a link to a file called all_in_one that should be helpful.
http://forum.xda-developers.com/showthread.php?p=10387163#post10387163
zedgar said:
I was had similar problems as well and it turned out fine. See this link at reply #3 (mine). The final issue for me to overcome was to make sure I had the proper .tar and .pit files as well as the updated samsung drivers. I include a link to a file called all_in_one that should be helpful.
http://forum.xda-developers.com/showthread.php?p=10387163#post10387163
Click to expand...
Click to collapse
I tried it everything that u posted and I still get windows could not recognize the device. I tried on both a vista machine and a xp machine. Nothing works!!!! Any ideas?
helikido said:
I tried it everything that u posted and I still get windows could not recognize the device. I tried on both a vista machine and a xp machine. Nothing works!!!! Any ideas?
Click to expand...
Click to collapse
Guys is there a way that I can adb clock work recovery and flash my voodoo soft bricked vibrant?
helikido said:
Guys is there a way that I can adb clock work recovery and flash my voodoo soft bricked vibrant?
Click to expand...
Click to collapse
Have you tried "adb reboot clockwork recovery" I remember when I had my first brick thats how I did it have you tried using odin 1.3 thats what I use and I have windows 7 64bit and it works all the time do you have the samsung drivers sorry I have to ask ?
Sent from my SGH-T959 using XDA App
AustinKnight45 said:
Have you tried "adb reboot clockwork recovery" I remember when I had my first brick thats how I did it have you tried using odin 1.3 thats what I use and I have windows 7 64bit and it works all the time do you have the samsung drivers sorry I have to ask ?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
well I'm using Odin v1.7. Also I have the Samsung drivers that were posted on this thread by a reply. Also how can i flash clockwork recovery through adb and what files do i need to do that.
helikido said:
well I'm using Odin v1.7. Also I have the Samsung drivers that were posted on this thread by a reply. Also how can i flash clockwork recovery through adb and what files do i need to do that.
Click to expand...
Click to collapse
Ok I dont know how to flash clockwork through adb have gone to the clickwirk recovery thread and checked there? Why can't you just select re install packages if you had clockwork before then thats all you do to get into it ?
Sent from my SGH-T959 using XDA App
AustinKnight45 said:
Ok I dont know how to flash clockwork through adb have gone to the clickwirk recovery thread and checked there? Why can't you just select re install packages if you had clockwork before then thats all you do to get into it ?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
because everytime i select that it reboots and doesn't take me to clockwork.

Can not update Manually

I have tried to update manually but cant. I have downloaded the file from samsung, put on root of card as update.zip and tried to install from clockwork. Is this the wrong way to do it.
I am on all stock and have clockwork installed. I downloaded from the link that has been provided from samsung It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?
If you're using clockwork, you aren't on stock. Last resort is to use the flash utility that Samsung provided. It completely wipes your phone (not your sd card).
nubsors said:
If you're using clockwork, you aren't on stock. Last resort is to use the flash utility that Samsung provided. It completely wipes your phone (not your sd card).
Click to expand...
Click to collapse
Is there a way to remove clockwork besides going back to stock? Also since I do have clockwork installed, will I not get the ota update to work correctly?
I can tell you what I know.
1) The official OTA update does not work with non-stock roms. In your case, your rom became non-stock once you installed CWR.
2) The flash utility provided by samsung will take any epic and clear it of user data and the existing rom and then flashes the 2.2.1 official rom. Your SD card will be untouched, at least mine was.
3) You can always re-root after you've flashed the official release. Do a search in this forum and you can find threads that explain how.
Good luck sir.
Just go get the cwm flashable pre-rooted eb13 rom that dameon87 posted in the dev section. There's also a link to it in the wiki.
DiGi760 said:
Just go get the cwm flashable pre-rooted eb13 rom that dameon87 posted in the dev section. There's also a link to it in the wiki.
Click to expand...
Click to collapse
Any difference between that and the one you can download from samsung or what you would get from OTA?
mynewepic10 said:
Any difference between that and the one you can download from samsung or what you would get from OTA?
Click to expand...
Click to collapse
Need to know too.
DiGi760 said:
Just go get the cwm flashable pre-rooted eb13 rom that dameon87 posted in the dev section. There's also a link to it in the wiki.
Click to expand...
Click to collapse
That one did not work. Do I need to try to get the one that is not signed. I dowloaded the signed one and it did not work. After the install it tried to boot up, but went to the samsung screen and then into the official factory restore mode and tried to reboot and stuck on samsung screen.
Use the unsigned one. The only difference betwen the flashable and the one from samsung is the flashable is deodexed.
Sent from my SPH-D700 using Tapatalk
s9ortner said:
Use the unsigned one. The only difference betwen the flashable and the one from samsung is the flashable is deodexed.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Thanks doing that now.
I had the same problem. Will try odin method when I get home, but I doubt that will work. Didn't work with the developers froyo.
Sent from my SPH-D700 using XDA App
I can't get the manual to work - mine is rooted and rommed, but my husband's is stock.
I have downloaded direct from Samsung 3 times. Once loaded on computer and opened, the Eula doesn't even have the Next button which is needed to proceed.
So strange, guess he will wait for the OTA and drain his battery at an inconvenient time!!
s9ortner said:
Use the unsigned one. The only difference betwen the flashable and the one from samsung is the flashable is deodexed.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I tried both of them and neither one of them worked.
nmoreman said:
I can't get the manual to work - mine is rooted and rommed, but my husband's is stock.
I have downloaded direct from Samsung 3 times. Once loaded on computer and opened, the Eula doesn't even have the Next button which is needed to proceed.
So strange, guess he will wait for the OTA and drain his battery at an inconvenient time!!
Click to expand...
Click to collapse
I'm getting the same problem with the samsung update software. I click yes to accept
And there is nothing that says next, just exit. I am getting errors using odin too. My computer
will see my phone just fine.....until I put it in download mode and try to connect with odin.
I keep trying to repair modem and restart computer to no avail. Its just weird how it all changes for the worse in DL mode. I don't know what to do....
Sent from my epic that is stuck forever on 2.1
funeralplanner said:
I'm getting the same problem with the samsung update software. I click yes to accept
And there is nothing that says next, just exit. I am getting errors using odin too. My computer
will see my phone just fine.....until I put it in download mode and try to connect with odin.
I keep trying to repair modem and restart computer to no avail. Its just weird how it all changes for the worse in DL mode. I don't know what to do....
Sent from my epic that is stuck forever on 2.1
Click to expand...
Click to collapse
If you are using odin try this.
Start odin on your PC first and have it up.
Put phone into download mode
Plug in your phone via usb and see if that helps.
It already sounds like you have the samsung drivers installed, but check to make sure.
mynewepic10 said:
If you are using odin try this.
Start odin on your PC first and have it up.
Put phone into download mode
Plug in your phone via usb and see if that helps.
It already sounds like you have the samsung drivers installed, but check to make sure.
Click to expand...
Click to collapse
Well I gave that a try. No go. I have tried everything I know. Two different computers, both xp. I can't even use the samsung utility because I keep getting the cant connect to usb. When it isn't in download mode i can connect to the computer, both computers just fine. It will tell me what phone I have and all. I just don't get it. Maybe I will just delete driver and install again. Is it a phone problem?
funeralplanner said:
Well I gave that a try. No go. I have tried everything I know. Two different computers, both xp. I can't even use the samsung utility because I keep getting the cant connect to usb. When it isn't in download mode i can connect to the computer, both computers just fine. It will tell me what phone I have and all. I just don't get it. Maybe I will just delete driver and install again. Is it a phone problem?
Click to expand...
Click to collapse
I have used a different version of odin with no issues at all. I have never used this one before.

Cannot setup phone (unfortunately, setting has stopped).

Hello, today i wanted to flash a new rom on my galaxy s4, rooted it a while ago but hadn't flashed a rom. Went to Rom Manager and was gonna do a backup but it was giving me an error so I could not do the backup. Since I had saved all my pictures and everything on dropbox I just went ahead and went to recovery mode and wiped my data so I could flash the new rom. When I tried to wipe the cache partition it just rebooted my phone. When the phone started up I get all the usual setup from TouchWiz. I started setting it all up as usual but when I get to the final screen (learn about key features) I hit finish and then i get the "Unfortunately, Settings has stopped." not allowing me to continue on to my home screen. So as of right now my phone is basically a paper weight because I can not to anything. Has anyone else encountered this ? Is there a work around ? Will appreciate all help.
P.s. Sorry if there is already a post about this, I just don't frequent this page very often and don't quite understand how all the search functions and all that work.
abyxjohnson said:
Hello, today i wanted to flash a new rom on my galaxy s4, rooted it a while ago but hadn't flashed a rom. Went to Rom Manager and was gonna do a backup but it was giving me an error so I could not do the backup. Since I had saved all my pictures and everything on dropbox I just went ahead and went to recovery mode and wiped my data so I could flash the new rom. When I tried to wipe the cache partition it just rebooted my phone. When the phone started up I get all the usual setup from TouchWiz. I started setting it all up as usual but when I get to the final screen (learn about key features) I hit finish and then i get the "Unfortunately, Settings has stopped." not allowing me to continue on to my home screen. So as of right now my phone is basically a paper weight because I can not to anything. Has anyone else encountered this ? Is there a work around ? Will appreciate all help.
P.s. Sorry if there is already a post about this, I just don't frequent this page very often and don't quite understand how all the search functions and all that work.
Click to expand...
Click to collapse
First off what firmware are you on. MDL, mf3, mj6, mj9? To check go to settings - more - about device and check build number. If it is mf3 than you need to go to the general section and read how to odin the md5 file same as other build numbers. You just have to take your time and read.
Sent from my SAMSUNG-SGH-I337 using xda premium
Never use rom manage to flash a rom. As stated, we need to know the firmware you're on to help you.
[email protected] said:
First off what firmware are you on. MDL, mf3, mj6, mj9? To check go to settings - more - about device and check build number. If it is mf3 than you need to go to the general section and read how to odin the md5 file same as other build numbers. You just have to take your time and read.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I cant check because I cannot get into the phone. I cannot complete the initial setup of the phone.
abyxjohnson said:
I cant check because I cannot get into the phone. I cannot complete the initial setup of the phone.
Click to expand...
Click to collapse
Can you boot it into download mode?
Edit, do you have a custom recovery on it and did you make a nandroid?
Do you have safestrap or how do you flash roms? Because if you have safestrap than your on mf3.. If you can install Roms without safestrap than you must be on MDL.
Sent from my SAMSUNG-SGH-I337 using xda premium
jd1639 said:
Never use rom manage to flash a rom. As stated, we need to know the firmware you're on to help you.
Click to expand...
Click to collapse
I didnt use rom manager to flash the rom, I was trying to create a backup of my stock rom with it. I went to recovery mode to try and flash the rom.
[email protected] said:
Do you have safestrap or how do you flash roms? Because if you have safestrap than your on mf3.. If you can install Roms without safestrap than you must be on MDL.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I dont have safestrap, and I hadn't installed any roms on my S4 yet, this was going to be the first time. I use to flash rome on my S2 a while back and was gonna do it for the first time with my S4 through recovery mode. Sorry if im not really giving you key information, I just don't know it. I learned the basics of flashing roms and that was about it. Obviously the wrong thing to do because I might have just rendered my phone useless.
jd1639 said:
Can you boot it into download mode?
Edit, do you have a custom recovery on it and did you make a nandroid?
Click to expand...
Click to collapse
Yes I can boot into download mode. Yes, I have clockworkmod installed. No I could not make a backup, It kept crashing and would not allow me.
I would try to odin the mdl firmware in download mode. You can get the firmware at sammobile.com. You'll have to register but it's free. You'll download a zip file. Use 7-zip to extract the .tar.md5 file from it. Use that in odin, PDA.
jd1639 said:
I would try to odin the mdl firmware in download mode. You can get the firmware at sammobile.com. You'll have to register but it's free. You'll download a zip file. Use 7-zip to extract the .tar.md5 file from it. Use that in odin, PDA.
Click to expand...
Click to collapse
Is there a place I can get a step by step of how to do this somewhere ? Really sorry, Im just not very knowledgeable about all this stuff.
abyxjohnson said:
Is there a place I can get a step by step of how to do this somewhere ? Really sorry, Im just not very knowledgeable about all this stuff.
Click to expand...
Click to collapse
You can try this guide. It's not for the s4 but all the steps are the same. Just don't use any files except for Odin linked in it. http://forum.xda-developers.com/showthread.php?p=26056924
jd1639 said:
You can try this guide. It's not for the s4 but all the steps are the same. Just don't use any files except for Odin linked in it. http://forum.xda-developers.com/showthread.php?p=26056924
Click to expand...
Click to collapse
Did everything with Odin and downloaded the file I needed but when I try to flash with Odin it says Fail. And at the messages you get at the bottom it says "Cant open the serial (COM) port."
abyxjohnson said:
Did everything with Odin and downloaded the file I needed but when I try to flash with Odin it says Fail. And at the messages you get at the bottom it says "Cant open the serial (COM) port."
Click to expand...
Click to collapse
You doing it on a Windows pc? Use the usb ports in the back, not the front. You the usb cable that came with your phone.
jd1639 said:
You doing it on a Windows pc? Use the usb ports in the back, not the front. You the usb cable that came with your phone.
Click to expand...
Click to collapse
Im using a laptop. Trying all the USB ports with the original cable that came with the phone.
abyxjohnson said:
Did everything with Odin and downloaded the file I needed but when I try to flash with Odin it says Fail. And at the messages you get at the bottom it says "Cant open the serial (COM) port."
Click to expand...
Click to collapse
Check to see if there are any popups that you have to allow before a connection can be made. Sometimes they appear behind the ODIN screen (on the PC). Also, make sure you have the proper drivers installed.
If you can get to clockwork, just copy a new rom to your SD card and flash it. You'll be up and running in 5 minutes.

Help Help Please!!

My galaxy is messing up everytime I turn it on it gets stuck on the Samsung logo and I dont what to do please help if you know how to fix this.
Did it just starting doing this by itself or have you recently flashed our installed anything. Also, what firmware are you on?
jd1639 said:
Did it just starting doing this by itself or have you recently flashed our installed anything. Also, what firmware are you on?
Click to expand...
Click to collapse
Im on AT&T i337 MK2 and all I did was reboot it so a new transition when opening apps would apply when it tried rebboting it go stuck on the samsung logo
Pace Sketchy said:
Im on AT&T i337 MK2 and all I did was reboot it so a new transition when opening apps would apply when it tried rebboting it go stuck on the samsung logo
Click to expand...
Click to collapse
Have you tried rebooting it again and do you have a backup of your phone. I'm sure we can get it working again but to do that it might wipe your device.
jd1639 said:
Have you tried rebooting it again and do you have a backup of your phone. I'm sure we can get it working again but to do that it might wipe your device.
Click to expand...
Click to collapse
I have tried rebooting it multiple times and it wont work. Yes I have a backup. By the way my phone is also rooted.
Pace Sketchy said:
I have tried rebooting it multiple times and it wont work. Yes I have a backup. By the way my phone is also rooted.
Click to expand...
Click to collapse
I would try a factory reset in recovery, you'll lose root so you'll have to re-root afterwards.
Wait do you have safestrap
jd1639 said:
I would try a factory reset in recovery, you'll lose root so you'll have to re-root afterwards.
Wait do you have safestrap
Click to expand...
Click to collapse
To tell you the truth I really dont know what I have. I just rooted my phone thats all I know. Sorry I cant tell you that part
Pace Sketchy said:
To tell you the truth I really dont know what I have. I just rooted my phone thats all I know. Sorry I cant tell you that part
Click to expand...
Click to collapse
Then you don't have it. Boot into recovery and do a factory reset.
jd1639 said:
Then you don't have it. Boot into recovery and do a factory reset.
Click to expand...
Click to collapse
Ok ill tell you how everything goes
jd1639 said:
Then you don't have it. Boot into recovery and do a factory reset.
Click to expand...
Click to collapse
Ok I did it three times and when I reboot its still doing it but on top of it all its still rooted cause when I reboot it still says Samsung Custom and shows a lock symbol.
Pace Sketchy said:
Ok I did it three times and when I reboot its still doing it but on top of it all its still rooted cause when I reboot it still says Samsung Custom and shows a lock symbol.
Click to expand...
Click to collapse
That's not a good sign that it's not working. The next thing to try is to flash the factory firmware. See the attached. You'll want to download the all in one file and flash that in odin.
http://forum.xda-developers.com/showthread.php?p=49687770
You'll download a .rar file, use 7-zip to extract the .tar.md5 file from it. Use that file in the PDA slot in odin.
jd1639 said:
That's not a good sign that it's not working. The next thing to try is to flash the factory firmware. See the attached. You'll want to download the all in one file and flash that in odin.
http://forum.xda-developers.com/showthread.php?p=49687770
Click to expand...
Click to collapse
Is it the one that says all in one mirrior or the all in one i337 MK2. And I really hope this works cause I cant have this phone break.
All in one mirror
jd1639 said:
All in one mirror
Click to expand...
Click to collapse
Ok thanks but also do I download Odin on the computer or go into download mode on my phone?
Pace Sketchy said:
Ok thanks but also do I download Odin on the computer or go into download mode on my phone?
Click to expand...
Click to collapse
Download Odin and the all in one onto your computer. You'll run Odin from your computer. Boot your phone into download mode then plug it into your usb cable. Odin should show that your device is connected.
jd1639 said:
Download Odin and the all in one onto your computer. You'll run Odin from your computer. Boot your phone into download mode then plug it into your usb cable. Odin should show that your device is connected.
Click to expand...
Click to collapse
Ok thanks. Is there a certain place i should download Odin?
Pace Sketchy said:
Ok thanks. Is there a certain place i should download Odin?
Click to expand...
Click to collapse
Doesn't really matter. Somewhere where you'll be able to find it
jd1639 said:
Doesn't really matter. Somewhere where you'll be able to find it
Click to expand...
Click to collapse
Ok so Im sorry for askling this but what am i supposed to do with odin? And how do i use it?
Pace Sketchy said:
Ok so Im sorry for askling this but what am i supposed to do with odin? And how do i use it?
Click to expand...
Click to collapse
Start it up. You'll see a PDA slot where you can browse for a file. Browse to where the.tar.md5 file you downloaded is. Then boot your phone into download mode and plug the usb cable into it. Odin should have a com in the upper left hand corner turn yellow or blue, it depends on the Odin version you're using. Once you see that your phone is being recognized by Odin and you can hit start. If everything goes right it should take about 10 minutes for it to do its thing. If it's successful boot into recovery and do a factory reset
Pace Sketchy said:
Ok so Im sorry for askling this but what am i supposed to do with odin? And how do i use it?
Click to expand...
Click to collapse
I don't want to steal your thunder JD. Sketchy do you live near a BestBuy? If so some have a Samsung Experience Shop which they can do that for you if you are unsure how to use Odin. Tell them Kies broke your phone and ask them to reflash it. Its free. Try not to show them the custom logo.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Categories

Resources