i just flashed bionix 2.2.1 over nero v5. everything was working well with no problems. i was looking through the settings and decided to change the lockscreen to the rotary one. after changing the lockscreen the phone now isnt able to load the rotary lockscreen and is constantly rebooting. it goes from the team whiskey load screen strait to the homepage and totally skips the lockscreeen. but it never stays on long enough to change the settings or reboot in clockwork or recovery. how can i fix this?
Not sure what the rotary lockscreen does, but i had a similar problem, reflash then try again. if you get the same problem, then reflash and abandon the rotary lockscreen use. For whatever reason the rotary would work on my wife's phone but not mine no matter what i did and out phones a built 7 days apart both running exact same setup........ go figure
If you can get into recovery (via hw buttons), try wiping delvik cache and fix permissions. Not sure if it will work or not but worth a shot.
thanks guys for trying to help. but the phone would never let me change anything because after it would reboot it would lock up and reboot again over and over. luckily i could get into download mode and just odin back to stock.
you can delete this thread mods
Related
Hi everyone, I tried to remove the lag fix but it said there was no space on my memory card. Then I tried to open some apps up, and they would all force close. I restarted the phone, and I am stuck at the galaxy s screen. Please help me make my phone work again!
i had the same thing i went into recovery mood up down power...etc wipe user and date cache, but now i dont get the tmobile jingle at power up
Which lag fix did you apply?
I had the same problem today when I tried to used lag fix but it was stuck at vibrant screen and keep rebooting. I tried to went into recovery mode and deleting user interface still didn't help. Finally I had to flash stock vibrant to get it working again.
Sent from my SGH-T959 using XDA App
solution is to get back to stock rom.. look in the development section on how to fix it.. this happen to me after installing lagfix.. i can not install any app as it is saying i do not have any space available...
Thanks for the help guys, restoring a nandroid back up seemed to do the trick.
I know you fixed it already but this might help others ....
1.) Which lag fix was it?
2.) If it was Voodoo it can take a long time to remove and it will sit at the boot logo.
3.) If you get impatient and reboot before the removal is complete, you may not have all your data copied over.
I have the same problem! The lag fix i have is the one from this video: youtube.com/watch?v=KY1YXrltIRE (cannot post link), how do i get back to stock rom? thanks in advance from a noob
I was running CM7 7.02 from emmc with Dalingrin's 4/24/11 OC kernel, and was very happy with it. However, I got distracted by shiney... Rom manager gave me a pop up saying 7.03 was available, which it hadn't done in the past, so I figured, why not give it a shot?
I ran a full backup, installed the update, booted... and all my apps were gone. It was a fresh install instead of an install over my existing 7.02 like I would have gotten if I just booted from my CWM boot SD card and flashed. Well, crappy, but I have my backup, right? Still, might as well try the OC kernel and see how it runs real quick... oh, won't boot after the OC kernel. huh.
So I boot to recovery, and clear cache, and restore my backup.
Everything looks perfect. Back to my customized layouts... wait, where is my Honeycomb style bottom status bar? I'm back to the default look/feel. Ok, I can fix that... wait, why isn't my N button working? I've gone into ADW settings, selected several options for the "home button" functionality, rebooted, nothing works. I've got everything except a working N button. Why?
The only time it has worked is ONCE right after I installed a second home launcher, flashed 7.02 over 7.02, rebooted, and hit the button. It popped up and asked me which of the two launchers I wanted as default. After that, it hasn't responded.
Anyone have any idea what I did or what I can do to fix this? I'm fine if I have to format and start from scratch, I just would rather not since I'm stuck in an airport and waiting on a flight home, so I'd rather be reading/watching movies/playing music instead of tinkering... if it's something simple to fix, ya know?
That post just made me mental!
Sent from my Nexus S using XDA Premium App
I'm glad I could provide some amusement?
I ended up wiping data and system, installing 7.02, gapps, and 4/24/11, clearing cache and dalvik, then booting up and then refreshed my apps and data from Titanium. Everything worked great for a while and then the N button stopped again. No idea what happened. I've been working 16+ hour days for 7 days straight and can't think straight. On the up side, I was able to finish watching my movie on the flight home after my flight was delayed for 4 hours.
I need sleep. I also need to figure out why my button keeps dying. Works perfectly in CWM and to wake the device up, just not for it's intended purpose.
Had a similar problem with the N button not working with the 04/24 kernel. However it got working after a reboot...
One thing you could try is to use the 04/04 kernel instead. Might be a OC related issue.
Hey guys. I have a very interesting situation happening with a VZW Galaxy Tab 7.1 that I bought from someone (I own a business buying/selling/trading cellphones and tablets)..
As soon as you boot it up, every app starts to force close!
If you sit there long enough and accept them all, you can actually use it a little bit. Apps keep FCing as you play with it, though.
The only noticeable thing is that the wallpaper always stays the same. It was 2.3.4 (I believe) when I got it, but I've tried flashing stock ROMs and the Galaxy Cubed 3 ROM through Heimdall, but that wallpaper ALWAYS stays there!
I just flashed the Galaxy Cubed 3 ROM on there 20mins ago, and everything switched over (the look, the battery icon, notification bar, window animations) EXCEPT that wallpaper (which ironically is of B.I.G.) and the FC issues.
I read somewhere about JTAG or something, but it boots fine, just having software issues.
PLEASE, if anyone knows anything about this issue, I need to sell this thing so I can make some money =) Thanks in advance for the help!
im in the exact same boat with a customers tablet. ive tried everything. takes forever to boot and factory reset does nothing. 4 installed apps never uninstall either.
Do you have custom recovery installed? After flashing with Heimdall, enter custom recovery and wipe data and cache. Reboot. No more issues.
I can't find a way to get custom recovery to flash. I've tried every walkthrough. There's no explanation as to why factory reset/wipe doesn't work
So i got my g2 to get somehow the JB buttons back (im using cloudyG3 btw)
Did this with G2 Xposed.
But i could not edit the menu and back keys position, so i unistalled it. But buttons are still same and kitkat aint back... and app crashes when going into frontal buttons on settings...
So far tried to replace them again in the way i want, but gravitybox isnt doing anything either...
i want back button on the right and menu button on the left...( Samsung way)
Any help on fixing this buttons would be highly apreciated, as having them reverse is terribly annoying.
If anyone need any more details on my phone, please ask.
Greetz
PD: Got nandroid backup, tried restoring only system (dont wanna go 1 week back in stufd) but no results.
Hello. I sort of had this issue yesterday, and the reason why it happened for me, was that my phone didn't wipe EVERYTHING as it was supposed to do when I wiped data+system+cache+dalvik, it just counted CloudyG3 as an "upgrade". That unfortunately means that your CloudyG3 was dirty flashed and that's why it doesn't work.
What I would recommend you to do is to backup all your apps only, and return to stock. then towelroot+autorec and start all over again.
I did something else, but I wouldn't recommend it since my phone stuck at bootlogo and kept turning itself on. I formatted Data in TWRP (which means internal storage too, don't do this unless you REALLY can't get out), and tried pushing a ROM through ADB (which didn't work because my adb wasn't properly installed), but then restored to stock through download mode.
I'm currently with OptimusG3 1.4.1 on my d802.
This morning I noticed that my screen off effect takes no effect at all although I've already choose 'retro-tv' effect.
I noticed that my navigation bar also skip its animation when pressed, so it is just like it doesn't have its animation anymore, just give a sudden glow when pressed.
I'm curious that maybe something off with the animation scale, but when I checked in developer option in setting, the animation scale seems normal, therefore when my toast notification came up, it doesn't show the toast suddenly not like my navigation bar.
Then I tried to test the device test through hidden menu "3845#*802#", the very top one. It asked me to confirm that the test will be held via AAT test therefore I have to agree, and when I pressed agree, my phone restarted and won't go any further to the bootloader, yes it is soft bricked.
Then I tried to re install the ROM, but after the installation complete, when I entered the setup wizard on first boot, there is no navigation bar:crying:
I checked the setting > display, and there is no option about the navigation bar button that should exist there.
Got frustrated, I tried to restore the very first nandroid backup of my stock JB ROM. After it is booted I saw my navigation bar come back but I only saw my home screen for 2 seconds and it got replaced by AAT service, therefore, the navigation bar disappeared again.
So I decided to reboot it, and when I saw my home screen, I spam pressing home button to prevent the AAT to run, and it worked. I uninstalled the AAT service through Titanium Backup to see if the problem still exist. Gladly after removing the AAT, I booted up my stock JB ROM normally.
Then I tried to install the OptimusG3 1.4.1 once again along with the KK baseband since it is running on KK.
But once again, I can't see the navigation bar on the first boot.
Problem that maybe caused this?
I assume that now my system will always try to run the AAT service which cause my navigation bar problem. Unlike at the stock JB, this OptimusG3 1.4.1 doesn't have AAT service in the app list, so I can do nothing with it.
And if it is really like that, is there any way I can change the boot way so the AAT will no longer run on every of my boot??
Please help me, I can't even run my phone again in KK if every time I boot, I always face that AAT service.
Please help. . . .
Try to flash an aosp rom and use it for some minutes. Afterwards download the optimus zip again and flash it.
Krenol said:
Try to flash an aosp rom and use it for some minutes. Afterwards download the optimus zip again and flash it.
Click to expand...
Click to collapse
If that is the case, I've tried using my stock JB ROM for hours, but that was also triggered by the AAT sercive at the first time it booted while logically, since it is a nandroid backup from a long time ago, why does it have to boot up with AAT service after restore?
I've also tried to restore old backup of OptimusG3 1.4.1 when I flash it first time, after I restore that nandroid backup, it goes bootloop, which means something prevent it to enter the home screen, which I assume it is the AAT recalling this ROM doesnt have that AAT service.
Aosp Roms don't have this service that's why you should try this
Sent from my LG-D802 using XDA Free mobile app
Krenol said:
Aosp Roms don't have this service that's why you should try this
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
appreciate the idea, pal.
but the thing is, if the dont have it, it means I will get the same issue with re installing the OptimusG3 1.4.1 because it also doesnt have it.
and even I manage to find a ROM with AAT service, which will automatically open the AAT service since boot, I still need to prevent it from opening like I did with my Stock JB ROM to maintain the navigation bar, because once AAT is opened, it will take whole screen which cause the navigation bar disappear again.
I need a way to make the way my phone boot like normal boot without any other app interrupt the booting process like the AAT did. I dont even know why in the first place this issue has caused that AAT always running on boot on whatever ROM I use.
I need a way to restore the normal boot process....
Then install Optimums but Reboot to recovery and delete the att service with the file manager of the rec
Sent from my LG-D802 using XDA Free mobile app
Krenol said:
Then install Optimums but Reboot to recovery and delete the att service with the file manager of the rec
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
Well, that is what I tried like I mention above, pal.
just like I said, this optimusG3 1.4.1 doesnt have AAT service, that's why it failed to run the AAT but still it get rid the navigation bar when booting.
Thats why I need a way to make the AAT stop running every time I boot and instead prefer a normal boot, there is something off with the script and I don't even know how it can change that and how I suppose to fix the booting way, not just the AAT need to be deleted, but also stop running from booting in whatever ROM I used.
Rei Zazie said:
Well, that is what I tried like I mention above, pal.
just like I said, this optimusG3 1.4.1 doesnt have AAT service, that's why it failed to run the AAT but still it get rid the navigation bar when booting.
Thats why I need a way to make the AAT stop running every time I boot and instead prefer a normal boot, there is something off with the script and I don't even know how it can change that and how I suppose to fix the booting way, not just the AAT need to be deleted, but also stop running from booting in whatever ROM I used.
Click to expand...
Click to collapse
that's why i would install an aosp rom and then install a stock rom. Maybe this will delete the script for loading this service.
problem fixed
Tried re install OptimusG3 1.4.1, install CloudyG3 2.1, Pardus ROM,
even flashing stock JB firmware, were not resolving the problem.
Got the fix from sir OptimusRs himself,
OptimusRs said:
don't worry backup your files to pc and flash Stock JB firmware and do (Factory Rest) an menu will show it say normal boot etc select normal boot amd press power button the device will boot normal.
it happen to me once.
Click to expand...
Click to collapse
I ended up brought myself to the service center though and I got my d802 with stock KK firmware just after OptimusRs telling me that.
So, the fix is to flash any Stock Firmware, but the thing is I already did that using Flashtool 2014 with CSE flash, but it doesnt give the clean flash because I still had the problem using that. Instead, try using LG PC suite because it gives a clean one like the service center guy use to handle my device. :fingers-crossed:
Thanks a lot, sir @OptimusRs :angel:
i have the same problem
I try to make this solution. But flashtool 2014 stop at 2 % while flashing the kdz file. Any one face this problem ??