Related
someone please tell me what does ADB stand for????????
i hate myself for being such a noob but what can i do?!?!?! whats adb pleaseeee...
and why is it that everytime i go into command prompt to try and do stuff with the phone it never finds "androidsdk"
ahh!!!!!
Frenzifun said:
someone please tell me what does ADB stand for????????
i hate myself for being such a noob but what can i do?!?!?! whats adb pleaseeee...
and why is it that everytime i go into command prompt to try and do stuff with the phone it never finds "androidsdk"
ahh!!!!!
Click to expand...
Click to collapse
How about you tell everyone what you are trying to do, and what you are typing in command prompt.
Android Debug Bridge....
Do you have Samsung drivers installed/setup?
Take a nice deep breath and do one learning step at a time. Android has a lot to teach. I would also encourage learning the phone use basics, reading up on things before attempting any mods. Welcome to android family.
Here is a good thread to start in.... http://forum.xda-developers.com/showthread.php?t=790004
tats_06 said:
Android Debug Bridge....
Do you have Samsung drivers installed/setup?
Take a nice deep breath and do one learning step at a time. Android has a lot to teach. I would also encourage learning the phone use basics, reading up on things before attempting any mods. Welcome to android family.
Click to expand...
Click to collapse
lol ... well i already opened another thread about how to put hebrew fonts on the phone to support hebrew instead of seing empty boxes on facebooks and websites and what not... my phone Was rooted, Was voodooed but there was force closing on things and market stopped working so i completely stocked the phone, only thing that doesnt work now is my phone memory which is on 0.00 which i read and you apparently have to root the phone all over again
so right now... the phone memory is my only issue, i guess i can live without hebrew if its too much of a hassle to install while rooted::
http://forum.xda-developers.com/showthread.php?t=480964
i have no idea how to work this^^^
i have the drivers installed like i said, i was able to odin, root, and voodoo, clockwork as well ofcourse. now phone is completely stock except for that memory issue.
http://forum.xda-developers.com/showthread.php?t=804457&highlight=phone+memory
completely got lost in this thread... so yeah, those are my problems with the phone at the moment. i wont mention the obvious of gps etc.
another awesome issue, everytime my phone is turned off and back on, it starts that set up process all over again... language; facebook; google... etc... why?
Once you install adb on your computer you have to go to change the path on your computer to point to that folder. Or you can change your directory to the one that holds the adb file from within the command prompt. This should allow you to run the commands.
The issue you are having with the memory on your phone is because voodoo did not completely uninstall. You can fix this by running the steps in this forum to uninstall voodoo. Don't try the one step zip, you are going to have to do the three step manual method to make this work. Don't forget the final step to wipe data.
Once this is done voodoo will be gone, memory should be back, and phone should stop resetting on every boot.
Obviously you aren't the only one to ever have these issues. But you can recover.
Good luck.
Sent from my SCH-I500 using XDA App
No intro
Here is what I did:
Wanted to flash new ROM, [ROM] Super Clean DI01 + AOSP apps, (Thanks to everyone who worked on it AND everyone on this forum cause Ive spent the past week reading the threads and felt confident enough in the info and the support to try).
BUT
when trying to download with ODIN (not certain if this was the right method, too late now) found that it did not work, couldnt see file when looking in the PDA browse.
STUPIDLY disconnected phone from computer while in DOWNLOAD MODE. You know, when the screen says "DONT DISCONNECT FROM TARGET". Apparently, the rebus string for "you dun f*cked up" is a phone symbol... a yellow triangle w/!...computer symbol.
What do I do to get back to fun?
Tried reboot, tried CWR reboot, tried Nandroid restore w/reboot still the YDFU symbol
*EDIT* I continued searching while awaiting a response and found this thread: Stuck on connection warning screen. This got me out of the YDFU screen into a nice force loop. Since I am not a -complete noob- I pulled a nandroid backup outta my hat and ...tada back to good, now to the fun!
I spent all day yesterday trying to fix my Epic with no progress and feeling a little sol.
Yesterday I decided I needed a new ROM/kernel because I was averaging only 4hrs of battery life with Supernova and wanted to try Nebula ROM with EXT4. I backed up everything on my laptop and did a Nandroid backup as well. I also have Titanium backup backed up on my pc. I always always back up. I started fresh by flashing to stock and starting over. I rooted with 1 click, flashed DK28, and where I believe I screwed up is I didn´t upgrade to Clockwork 3 (looking back I don´t know wtf I was thinking by proceeding the following way), instead I went to advanced, reboot recovery and ended up rebooting my system into 2.5.1.2. I rebooted my phone and all was good, powered off, 3 fingered and I still had 2.5.1.2 so like a dumbass I figured I was good to go ahead and flash Nebula. LOL so what happened? the Rom installed, I finished like I always do and when I went to boot up my phone I flashed into v2.5.1.0 and thats where my phone stays. If I try to do anything it gives me E: Can´t open/cache/recovery/log
I tried to restore of course and I get this message. I have tried to Odin back to stock but my phone will not connect to a pc.
Heres my situation. I live in a house with 6 computers that I have attempted to connect to with no luck, 5 of these have adb and the Android SDK, several drivers (including the Epics) installed and the C drives have literally no more space. The other pc has Windows 2000 so I wondered if it won´t install the drivers or pick up my phone because its so old??? My main laptop is running Ubuntu and Im not understanding how or even if I can Odin my phone on it, besides I think this laptop won´t connect to my Epic because of the USB port and I dont have a clue how to detect or fix that. My mom has a brand new PC with Windows 7 thats never had anything connected via USB yet that I thought was worth giving a shot at. I only have the stock USB cable though and I was wondering if I bought a new cable if it would be more likely that my phone would connect.
I am not very educated on Android or computers so I prob shouldn´t have done as much flashing as I have to begin with. If I understood file systems better I would prob figure it out.
Thanks for any help or advice. If I over looked the answer in front of my face I am sorry it is because I am retarded and don´t understand computer lingo.
Are you connecting the proper way to odin?
Step 1: open odin with phone Disconnected from PC (if you dont open it first it may not recognize your phone, so i hear)
Step 2: hold 1 on keypad and power on phone --> download mode
step 3: connect phone to PC
step 4: Flash rom
if odin still isnt recognized I would suggest taking out your microsd card and put it in another phone or a microsd card reader and put a basic dk28 rom/dl18 (maybe the acs one that includes modem) rom on there then put the sdcard back in your phone and flash that in clockworkmod and see if it'll boot (wide data/cache/dalvik before doing this)
Also search the forum i'm pretty sure theres an RFS formatter somewhere that'll format your /system/data/cache back to RFS, you probably need to do that before flashing back the other rom...
So, if I understand the OP correctly, you accidentally flashed an ext4 only rom on rfs with 2.5.1.0?
This thread had a flashable reRFS conversion, just in case you need it.
This thread has a cwm flashable di18 and modem.
Those should get you up and going again with cwm 2.5.1.0. If they don't, Odin is really the answer and I don't know what to tell you.
So I tried both of your ideas and I am so pist off. I am now stuck in download mode and cant get 7 freaken computers (one literally brand new with Windows 7, one with Vista, one with XP, 3 with Linux, 1 with 2000 out of being desperate with 5 different usb cords to connect. Clearly my phone is the problem because the sd reader can read my sd just fine and my mom, sister and gramps connect o the same computers just fine. Ive accepted that I am ****ed at this point. I have never got this phone to stay connected to a pc and I think I hate it.
It is starting to sound like it is time to head to a sprint store.
Erica8123 said:
I am now stuck in download mode and cant get 7 freaken computers (one literally brand new with Windows 7, one with Vista, one with XP, 3 with Linux, 1 with 2000 out of being desperate with 5 different usb cords to connect.
Click to expand...
Click to collapse
Have you tried to just pull the battery out? Then, put it back in the phone and boot into CWM? Or pull the battery, then boot into recovery? I personally hate going to the Sprint store and I try every possible option before going.
If you can get another USB cable it will probably work. I use an evo cable. Also for future reference there are no custom kernels on dk28.
Sent from my Evo Killer!!!
Hey, I just wanted to update.
I had tried several usb cables to connect btw including a new one I just bought. No luck. I had tried literally everything to fix my Epic and I was super pist during my last post lol. I finally had to cave and take the block walk (literally) down to Sprint and thank God I insured my phone. He was hella cool about it, just laughed and said he doesn't want to bother with it and replaced it. I am still trying to decide what I wanna do as rooting goes (besides getting rid of pretty much every app they put on there).
Thanks again everyone
Okay first of all, let me start by saying this is my first post and I AM a noob, so be patient.
Okay, my problem is that I can't root my Sprint Samsung Intercept. I've tried SuperOneClick, Z4Root, Universal Androot, and some other one. NOTHING has worked. The SuperOneClick somewhat worked, it installed SuperUser but when I downloaded apps that require a root, they said my device isn't rooted.
I'm with Sprint and running 2.2.1.
Pease help because this is driving me crazy!!
i dont know how this stuff works either but my brother has that phone. it could be your usb isn't reading. or rather, your computer isn't recognizing the device. google samsung intercept usb and you'll see a lot of issues. this may not be your problem but its better to tell you just in case. so far for his cell phone, because he wants to tether it to his computer, so far nothing works. not downloading the right drivers. loading without debugging. mounting the sd card. thats one big solution that hasn't worked. i have high hopes for this other fix, to load samsung pc studio. New_PC_Studio_1.4.0.IL2_4.exe is the file. you can google and find it.
this site has some info. if it works and i remember to, ill repost and let you know.
en.kioskea (take out space, insert a dot)net/forum/affich-240949-samsung-sgh-f480-usb-driver-problem
hope this helps. if not then good luck. and heck if anyone else knows why exactly it does this and a real fix other than the whole disable usb debugger issue. then let me know. i even thought about trying to load the sdk for android to see if that would create some sort of connection with the phone and computer. thanks and take care
hope this helps
sdx-developers is the best place for intercept developement
http://forum.sdx-developers.com/int...ructions-on-rooting-spring-samsung-intercept/
follow the first step to get SWUpgrade setup (the rest is instructions for eclaire [pretty sure])
http://forum.sdx-developers.com/int...-2-2-(easy-root-via-swupgrade)-(battery-mod)/
flash this kernal with SWUpgrade and youll be rooted.
http://forum.sdx-developers.com/int...important-features-working!)-(updated-11311)/
i assume youll be wanting a recovery as well i recommend cm01 get the tar and flash it just like the kernal
intercept doesnt have many custom roms but there is tons of mods you can apply to the stock rom
I tried SWUpgrade and I bricked my last phone but it didn't matter because it was already defective.
Sent from my SPH-M910 using XDA App
did you patch SWUpgrade? delete everything in the binary folder except the file you were trying to flash?
ive never had a problem with it. it even saved me from quite a few softbricks in the short time ive had my intercept.
I did everything the videos and forums said to do. When I did that I got a different kernal but I couldn't get any service, my phone would restart every 2-5 minutes, and it would randomly vibrate. Until I got another one. I finally got SuperOneClick to get passed the "waiting for device" stage and I supposedy rooted my phone, when I tried to install apps that required root access they said my device is not rooted.
Sent from my SPH-M910 using XDA App
Alright, so last night I was fooling around with "Type Fresh," which you guys have probably heard of. It was released here... It's a font changer...
Anyway, things were going good until I tried a font named, "Joystix," which replaced quite a few of my fonts. That caused my phone to go into a crazy bootloop.
So, at this point, I do not have Clockwork Recovery. I actually have the Stock Recovery. For some strange reason, my stock recovery just takes me to a screen with a red triangle, and factory reset just shows this hard drive and a loading bar that never goes anywhere before rebooting my phone into a boot loop.
I've checked to see if ADB will work in my stock recovery, and it does, except for the fact that my phone is, "offline," which is probably not good.
Is there anyway I can get my phone to work again? I remember when I was getting bootloops and I somehow got the phone to reinstall all the correct stuff after going into the stock Volume Down+Power thing a few days ago. I don't know or remember how. Like, it was going into the whole process of giving me the choices and said, "Do you want to update?" I said yes and voila, everything is back to normal. Sadly, this isn't the case atm. :|
halp
wauterboi said:
I've checked to see if ADB will work in my stock recovery, and it does, except for the fact that my phone is, "offline," which is probably not good.
Is there anyway I can get my phone to work again? I remember when I was getting bootloops and I somehow got the phone to reinstall all the correct stuff after going into the stock Volume Down+Power thing a few days ago. I don't know or remember how. Like, it was going into the whole process of giving me the choices and said, "Do you want to update?" I said yes and voila, everything is back to normal. Sadly, this isn't the case atm. :|
halp
Click to expand...
Click to collapse
Well I've never personally used type fresh to change fonts, I've done it in other ways. Just a thought for ya, but I would recommend that if you can get adb to recognize your device (cmd: adb devices) try booting into hboot(volume down + power), and see if it recognizes it regularly that way, from there I recommend trying a program called Droid. It's a windows program that I used when I messed up re-rooting my replacement mt4g (tip: Don't try rooting when having been awake for 26 hours for no apparent reason ). It has a feature called Debug Console which fixed a bootloop, and constant force close that I somehow managed. I also suggest pulling your sdcard, getting a usb scard reader, and installing the stock recovery zip (Pdimg or something like that, I forget off hand).
That's all I can think of, hope it helps
...I finally looked at my SDCard via my brother's phone.
Every thing in my SD Card pretty much has "Font" in front of it in regards to the name.
I mean... Yahoo became FontsYahoo.
wat
Solved.
For those who were wondering, I found out that I had to rename the recovery file to the PBNASFASodhwhatever it was.
I notices a few users have mentioned that they're dealing with trying to restore or unbrick their Continuum after flashing incompatible kernels and other problems.
I made this backup immediately after I got root, before I did anything else, to make absolutely sure I wouldn't be SOL if anything went awry. I've made absolutely certain this works, by unzipping and flashing on my own Continuum prior to uploading. It contains the system, recovery, and kernel partitions.
This file is also helpful if you need to get back to stock for warranty purposes, in which case you can manually un-root by using your favorite file explorer (I happen to prefer ES File Explorer), grant root permissions, mount system as rw, then manually delete SuperUser from /system/apps, su from /system/bin, and busybox from /systen/xbin. I hope this helps some of you who have been stuck.
You don't need to be rooted to flash this. Simply unzip, flash the .tar.md5, and you're golden. If you end up in restore mode after flashing, you probably need to do a hard reset, but this is unlikely as I tested it by flashing this a few times after installing various programs from the Market and never had to do a hard reset.
Don't forget to put your phone in Download mode by removing the battery, then holding the vol down button while inserting the usb cable. Good luck!
http://www.mediafire.com/?a897dbakz4j7k4f
Thanks for this. I had been messing around with the phone. I was able to get it back to stock.
Kay I try to flash this and it's telling me it's an invalid image type
Never mind, I got it. Thanks
Not a problem, glad I could help!
My phone was soft-bricked. This worked like a charm. Thank you so much!
I ran this and everything passed then when i boot up the phone with animations and sound after the animated verizonwireless logo is up for a while; everything goes black.
any suggestions? never mind I had to do a wipe then it worked
kingtuk1 said:
I ran this and everything passed then when i boot up the phone with animations and sound after the animated verizonwireless logo is up for a while; everything goes black.
any suggestions? never mind I had to do a wipe then it worked
Click to expand...
Click to collapse
Yup, gotta wipe! At first it's so easy to forget this step. When you get to customizing your installation, you'll get to used to having to wipe it'll become second nature!
I'm so glad to hear this is coming in handy for you all! Now that you got this done, get yourself froyo, courtesy of imnuts: http://forum.xda-developers.com/showthread.php?t=1197415
Ok after having installed EC03 Froyo via imnuts's thread. Everything was going fine except for some bugs here and there. Fast forward a couple weeks later and I try to fix those bugs by installing a stock odin rom via torque's thread (seems so foolish now that I look back on it). Which brings me to today and my bricked Continuum.
Well to explain further I tried to install the odin Rom only to receive a FAIL in the end (Selected the md5 file through the PDA option and proceeded to flash). Disconnected afterwards only to find out I can't even get the Samsung logo to show up or the phone to charge, but the phone will still go into download mode.
And this leads me to this thread with the same outcome. I've tried flashing this eclair? image only to end up with the fail message again. After the recovery.bin stage it just says "Complete(write) operation failed." Any help with this matter would be appreciated.
Edit: After some searching, gonna try it with imnuts' DL17 image. Will post results.
Edit2: No luck with that either. Guess I'll just wait until the Bionic gets released, but for now I'll have to dig up my dumbphone.
Native89 said:
Ok after having installed EC03 Froyo via imnuts's thread. Everything was going fine except for some bugs here and there. Fast forward a couple weeks later and I try to fix those bugs by installing a stock odin rom via torque's thread (seems so foolish now that I look back on it). Which brings me to today and my bricked Continuum.
Well to explain further I tried to install the odin Rom only to receive a FAIL in the end (Selected the md5 file through the PDA option and proceeded to flash). Disconnected afterwards only to find out I can't even get the Samsung logo to show up or the phone to charge, but the phone will still go into download mode.
And this leads me to this thread with the same outcome. I've tried flashing this eclair? image only to end up with the fail message again. After the recovery.bin stage it just says "Complete(write) operation failed." Any help with this matter would be appreciated.
Edit: After some searching, gonna try it with imnuts' DL17 image. Will post results.
Edit2: No luck with that either. Guess I'll just wait until the Bionic gets released, but for now I'll have to dig up my dumbphone.
Click to expand...
Click to collapse
Read the OP from pastorbennett here: http://forum.xda-developers.com/showthread.php?t=1203597 and try the unbrick process. You can do a search for pastorbennett and trailblazer. Both have posted "recovery processes", or at least links to others that have posted recovery processes. They've saved my butt a couple of times... Except on my first phone that wouldn't go into DL or Recovery Mode. It would just flash the Samsung logo, over, and over, and over again... That happened before pastorbennett posted the unbrick info. Oh well, Verizon replaced it under the hardware warranty. Thankfully.
Looks like I didn't search hard enough.
Thanks for the link Moon. I will be trying this ASAP.
Hit a little bit of a snag trying to get it to work. It told me to install drivers for my device, however my Phone does not show up in the dropbox and the only related thing I can find is "Gadget Serial".
I've tried uninstalling the drivers, but Win7 is being a fool and automatically installing drivers for me.
Does anyone know why i get a 'FAILED' after trying to flash this with Odin? My phone is soft-bricked btw.
Native89 said:
Looks like I didn't search hard enough.
Thanks for the link Moon. I will be trying this ASAP.
Hit a little bit of a snag trying to get it to work. It told me to install drivers for my device, however my Phone does not show up in the dropbox and the only related thing I can find is "Gadget Serial".
I've tried uninstalling the drivers, but Win7 is being a fool and automatically installing drivers for me.
Click to expand...
Click to collapse
Okay, if you can, grab a different computer (either Windows XP or Windows 7) and install the samsung drivers from this post: http://forum.xda-developers.com/show....php?t=1203597. The hint here with ANY Windows computer is to install the device drivers FIRST! (I've been a system administrator for about 20 years.) Then plug in the hardware. It usually makes the installations go MUCH smoother.
If you have to use your computer, try installing the Samsung drivers first, then plug the phone in.
zzir said:
Does anyone know why i get a 'FAILED' after trying to flash this with Odin? My phone is soft-bricked btw.
Click to expand...
Click to collapse
The key to odin seems to be this:
1. Start odin.
2. Click the PDA button and select the odin TAR or MD5 file. (You can only do one. Not both.)
3. Make sure the phone is not plugged into the computer.
4. Make doubly sure the phone is not plugged into the computer.
5. Put your phone into download mode. (With the phone off, hold the Volume Down button and turn the phone on.)
6. Then plug the phone into the computer.
7. Start the odin flash and you should be good to go. Also, before unplugging the phone, make sure it says either success or failed. If it doesn't say anything, or says loading (or something like that), WALK AWAY! Go get yourself a cup of coffee, a soda, a nice cup of tea... Something. I recommend waiting at least 10 minutes. If the progress bar has not moved, in that time, okay, then pull the cable and the battery and start again.
I tried to do this, but when it boots into recovery mode, it says update.zip is gone. Any ideas why this might be happening? Also if it's like this, will Verizon take it back within the 14 day return policy without charging me anything?
Tarheel487 said:
I tried to do this, but when it boots into recovery mode, it says update.zip is gone. Any ideas why this might be happening? Also if it's like this, will Verizon take it back within the 14 day return policy without charging me anything?
Click to expand...
Click to collapse
Did you flash the CWM Recovery in Odin? (cwm_recovery_test4_adryn.tar) Can be found here if not http://forum.xda-developers.com/showthread.php?t=1230072
is it possible to flash this with heimdall or only odin?
ntien said:
is it possible to flash this with heimdall or only odin?
Click to expand...
Click to collapse
I don't know, however, pastorbennett posted this http://forum.xda-developers.com/showpost.php?p=16600453&postcount=29. It might help? I use Linux at home to build most of this stuff, then use my wife's Windoze machine to flash. It just seemed easier.
Yes, you can use heimdall, you just need to extract this .tar and put the extracted files in the corresponding location in heimdall xD
Sent from my SCH-I400 using xda premium
yeah i saw that but in heimdall 1.3 the UI is different. i don't know where to put any of the stuff. i have the .tar but i dont know where to put the other stuff. here's a screenshot