[Q] Adding Android Market App. - A7 General

Can anyone tell me how I can add the android market app to my elocity A7 tablet

If you are rookie with Android - install DexterMod
http://forum.xda-developers.com/showthread.php?t=890042

Trial And Error...
I Don't know what i'm doing, so i don't recommend anyone trying what i am doing here but i'm just trying different things out, waiting for Dexmod 1.4 but i decided to experiment with my A7 and see what i could come up with. I wish i had a USB A-A cable so i could test and experiment a little more, but I was trying to use the newest Firmware from 2-24 and get access to Google Market. What i found in my experiment somewhat actually worked, but some things did not function as they should.
What i did was i extracted the Update.zip files from each the 1.3 dexmod, and the 2/24 update from elocity. I used the system.img from dexmod, and used the boot.img and recovery.img from the firmware update, and compiled them back into a new zip and flashed back to my device. When the update was done flashing, I had Both bluetooth functionality from 2/24 and google market with success.
What did not work:
My SD card kept trying to mount but did not successfully mount, and Access to USB Thumb drives also did not work, so i flashed back to 2/24 stock update to get my usb/sd functionality back.
I tried reading through several different forums on how to add google market 2.2.11 via market.apk, and google services framework, also tried an update.zip with market, but each update i tried said couldnt find .bin, and was trying to load it from usb, but could not get it to work on just the firmware update alone, so if i ever get a usb a-a cable, maybe i can experiment more and learn how to do different things with it.
I currently have Eclipse installed and waiting on standby, and i've launched 2.2 AVD and messed around with it a little bit, but did not see any system,recovery, and boot.img files from within the avd? all i found was cache,snapshots,userdata,and userdata-qemu.img files and hopefully someone more knowledgeable about this can help me out, in figuring out how to either edit these.img files from within windows 7, or help me figure out how to work with eclipse and avd to port market to our A7.Like i said, I'm new at this and some of what i did may sound incredibly stupid, but the only way to learn is by experience sometimes. i know this is in the wrong section (could'nt post in Development section) for that i appologise, and hopefully someone with experience in the ways of android could give me some helpful advice.
Thanks,
Jeremy

Related

HELP ! ROM Update to Android 2.0 / 2.1

Hey Guys at first sorry for my english i'm not good in it. And I'm a Android newbie I just gained a bit exerience with my Touch Diamond but it's broken now..okay but that's not the probleme....
If got a question:
After about 2 days of searching for an android 2.0 or 2.1 ROM I was a little bit confused of the diffrent news everybody was talking about. I'm root on my Hero. That was the first an last thing I made with my device.
1. Everybody is gonna talk about MoDaCo 3.0 but when I was trying to download his ROM my browser never got a request. Is the site down, where that ROM is hosted ?? Could someone give me a working link with this ROM ??
2. Is there a ROM with Android 2.0 or 2.1 outside or even not ??? And if yes are they working well ???
Would be nice if someone can help me =) thanks a lot.
Please answer soon if you know something about that =)
Greetz BassdoxXx
you can get modaco's roms at his website, www.modaco.com.
in the android development section there are some 2.0/1 roms, none of them works flawless, see for yourself if it fits your needs.
Thanks a lot for your fast answer. =)
The problem that i couldn't open the modaco page was my isp -.- i downloaded it at school
BassdoxXx said:
Thanks a lot for your fast answer. =)
The problem that i couldn't open the modaco page was my isp -.- i downloaded it at school
Click to expand...
Click to collapse
What? Does ISP's block that site? Lol, would never happened in Norway
there is a few 2.0+ roms out there for the hero.
most seem to be very usable now.
best sense ui would be lox/behnaam community release on 1.6.
http://htcpedia.com/forum/showthread.php?t=1448
there are two aosp roms worth looking at.
lox aosp ( im using that on a daily basis)
http://htcpedia.com/forum/showthread.php?t=1416
jnwhiteh aosp
http://htcpedia.com/forum/showthread.php?t=1528
Hello all,
I am having very specific request when it comes to choosing a proper rom for install on to my hero.
I am blind. Stock roms are only running Android 1.5. More robust accessibility features are available starting with Android 1.6 and improving even more with Android 2.0.
So for sure I am forced to upgrade my hand set.
There are various roms, some of their authors have even disable google specific features so I know I can't install such a rom.
All the accessibility efforts are being lead by the google developers.
Most likely these accessibility tools won't be usefull to most of you but please can anyone recommend me a rom where market is working and where the following applications can be installed and used?
- eyesfree suite of applications,
- talkback - the google screen reader for android,
- tts service.
All possible help is already appreciated.
sorry for the double posting. I've accidentally posted twice and I am unable to remove the post.
Hope anybody can help me please.
pvdeejay said:
Hello all,
I am having very specific request when it comes to choosing a proper rom for install on to my hero.
I am blind. Stock roms are only running Android 1.5. More robust accessibility features are available starting with Android 1.6 and improving even more with Android 2.0.
So for sure I am forced to upgrade my hand set.
There are various roms, some of their authors have even disable google specific features so I know I can't install such a rom.
All the accessibility efforts are being lead by the google developers.
Most likely these accessibility tools won't be usefull to most of you but please can anyone recommend me a rom where market is working and where the following applications can be installed and used?
- eyesfree suite of applications,
- talkback - the google screen reader for android,
- tts service.
All possible help is already appreciated.
Click to expand...
Click to collapse
i am on mcr3.0, i looked in the market, i can find 8 apps for eyesfree, tts is one of these. i didn't try to install one of these, but usually it works. the search for talkback returned nothing.
not that i want to be rude, but wouldn't you be better off with another phone if you are blind? i can not imagine a touchscreen only phone would be suitable for someone who is not able to see... especially because there are great devices out there that have a full qwerty keyboard, and come with android 2.0 out of the box... imho this would be a better solution.
again, the last thing i want to be is rude, but maybe this was your mistake: you posted in the htc hero section of this forum, the hero is a touch screen only device, including a virtual keyboard on the screen. it has only six buttons and a trackball, and two rocker buttons for the volume. just to make clear we are talking about the same device
if you are still up for the hero you could try the 2.1 rom from here: http://htcpedia.com/forum/showthread.php?p=30418&posted=1#post30418
best you try for yourself, it has some drawbacks, but maybe in areas you don't need (afaik syncing with exchange does not work for example, which wouldn't be a problem for me...). otherwise it might be worth to wait another week or two, we all are waiting unpatiently for the official eclair release from htc
keep asking if you need to know more, but maybe open a new thread, since your problems are very specific, and might drown between all the newbies question about "how to root my phone".
Hello,
Thanks for your reply and a great attitude.
Yes it may sound strange I have really got HTC Hero here. I know I'll be having problems with virtual keyboard but also I am afraid accessibility features of Android phones are not really such mastered one can use it daily. For example reading emails and content from the web browser is not yet possible. I just want to try how things work and I would also like to touch the virtual keyboard. If I can memorize computer keyboard and use it daily, typewriter keyboard, nokia mobile phone keyboard, then perhaps I might be able to make some use of this too.
I am sory but here are some more questions:
I haven't yet verified with some sighted friends but... is it possible my hero is running even older version of android like Android 1.5? I've based the assumption that it's most likelly running 1.5 because majority of the devices I was reading on the net are running it.
You've been triyng to locate eyes-free applications on the market but you were unable to find talkback. Are you sure you are running newer version of Android than 1.5?
Talkback is supposed to be installed with Android 1.6 andd 2.0 by default and you should be able to find it in the accessibility menu of your phone. I am not sure how well this applies to the custom roms.
Talkback requires google's accessibility api which is reported to be available on Android 1.6 upwards.
To tell you the full story first I've asked on the eyes-free google group whether some accessibility experts from there can help me but no one knowledgeable enough has replied to my query, so I'm trying my luck here then.
Oh I am really excited since I've got really well formed informative reply.
Thanks again
Edit:
Also, I've seen somewhere in the forums here this leaked HTC rom does not support the market. Has this been rectified already? You know if market does not work then most likelly I won't be able to install these applications I am tallking about.
Also you are mentioning possibility to wait a few weeks until HTC guys role out the official update for Hero. Wouldn't that break chances I will be able to root my device later?
Edit2:
Ooops, I should read better next time. Market works on this rom. The problem is paid apps can't be installed which is hopefully not a big issue for me since most of the accessibility enabled applications are free.
Which of the downloads from Hero 21 do I need?
63.18.55.06JU_6.35.09.26) or No Wipe Download. I will need a wipe I am sure but since this link says nowipe I am ehmmm. confused.
pvdeejay,
Unfortunately there is not an 'official' update for Android 1.6, 2.0 or 2.1 as of yet. There are rumours of one coming out soon, but nothing cast-iron yet.
You are correct in that the Hero runs 1.5. It does say it under Settings | About Phone (bottom item on list)| Firmware Version (bottom on list again), although without a working screen reader, there is probably little use in knowing how to find that.
If you did want to upgrade, I'm sure plenty of people could help find a ROM that would suit. The only issue with that is that you would need a rooted phone with a custom recovery image installed. Unfortunately, a lot of the procedures would not be easy for you, as the software that you might need to use to go through the procedure is probably not designed that well for accessibility tools. I don't know what kind of software you are using, but some of the instructions for making goldcards are quite complex, and involve editing some numbers in a 'table' which could be quite difficult for you, I would imagine.
I'm sure a friend would be able to help you out with making a goldcard/rooting if you did want to install a custom ROM (you'll probably be waiting a while otherwise ). They could even root their phone while doing yours (just share the goldcard between the devices).
Nonetheless, there is probably a ROM out there with little removed from it. I'll have a look just now, but you would need to have your phone rooted to do anything just now.
When it comes to rooting and installing custom recovery image. Do you thing the following instructions might work for me?
These instructions don't require a gold card:
- How to Root HTC Hero and Install Amon Ra Recovery Image
- How to install a custom rom on a HTC Hero
Hello,
Here are some numbers I've asked my friend to read from system -> about screen. The phone interface is in czech so I am unable to get some names translated to english, but I believe some of the geeks will understand these identifiers and might be able to help me what is best:
Code:
firmware: 1,5
63.118.55.O6U|6.35.04.25
2.6.27-a5504199
Build number: 1.76.405.6 146733 CL# 47214 release-keys
Software version: 1.0.0.A6288
pvdeejay,
to sum it up:
the hero definitly runs on android 1.5. there are no roms for older android versions, and a few homebrewn for newer versions, as we said already.
i searched for talkbalk on my 1.5 rom, so it is obvious that i couldn't find it...
about rooting of newer roms: it is just a matter of time, sooner or later there will be always methods of rooting a rom. what i meant by waiting is: wait until the official update is out, then wait a few more hours until the first rooted and customized rom is out
@pvdeejay,
I would have to agree with kendong2 that waiting for the official ROM is probably the best idea for you at the moment. There are no guarantees that an unofficial ROM would help, and it would be another user interface to try and learn.
@kendon,
I noticed he has the original, easily rooted version of the hero. IIRC, that is what I had on my G2 (and had the security unlocked bootloader out the box). If that's the case, would pvdeejay be able to 'fastboot boot' a full system img file for the purposes of testing it out to see if it meets the requirements.
The reason I ask is that I've only ever fastbooted my AmonRA recovery (I didn't flash it, because I never felt any need to). I'm guessing you could fastboot a full img, but I'm not sure about the practical issues of where it would be stored in memory...
Sorry guys originally I believed I am slowly getting into the matter and am begining to understand how flashing / rooting / upgrading home brew firmwares works on these phones.
After these 2 posts I feel like a total noob again.
Now again some very concrete questions:
What about these 2 guides I've posted links to?
Can I somehow got [Recovery] [13-Dec-2009] RA-hero-v1.5.2 installed so I will be able to do nandroid backup and then possibly flash some new roms?
Can I really brick my phone by trying to install amon ra?
Originally I thought the process works as follows:
1) get the custom recovery image installed (that's the amon ra in this case),
2) do a nandroid backup which will dump everything usefull on to the memory card,
3) backup and reformat the card,
4) download a rom, rename it to update.zip, put it onto the root folder of the cart, reboot the hero in recovery mode, do the wipe of the data partition, and run update,
5) reboot again and believe it's good.
Also some very significant bit is the thing you are all calling the radio. I am afraid I've not identified this bit thus it's missing in this summary.
Which files will I need to download if I decide to try Android 2.1 community edition 1.8? Are these files I've copied links to a few posts earlier both needed?
Can you please check this list, identify the things I am missing, and make suggestions and corrections why this may not work on my device based off of those number I tried to put down here?
Even if I won't be able to do this right now I'd be happy to get corrections as I can learn something new.
Of course I won't be doing all this on my own. I will ask my bro to read all the stuff to me and we'll do it according to your advices.
To give some bits about me and my computer skills, I believe I am a Windows power user, Basically I do also understand unix, I know what's bash how the files are arranged in a file system, can use command-line tools, telnet, ssh. I am working as a network administrator here so some background is there really.
Hi pvdeejay,
Answers to your questions here.
You can actually use fastboot to 'temporarily' load up the AmonRA recovery image into memory and run it from there. I do that on my phone, for the simple reason that I can't be bothered ) ) to flash the recovery. Once you get AmonRA running, the first thing you should do is make a Nandroid backup. It will be saved to your SD card, so then get the nandroid directory of your card and save it to your PC (just in case!)
So, here's how you'd go about this.
(Make sure you have the android sdk installed, and that adb and fastboot commands are working). USB cable should be plugged in throughout.
Before you begin, put the ROM you want (ie. Android 2.1 community edition 1.8) into the root of the microSD card (a .zip file).
Code:
adb devices
Should list your phone's serial number
Now turn off the phone, and turn it on with the back key held down (the one at the very bottom right of the device).
You should enter fastboot mode. Now type
Code:
fastboot devices
and you should see the serial number again.
Now type
Code:
fastboot boot AmonRA.img
where AmonRA.img is a file in your present working directory that is the filename of the latest custom recovery image. This does NOT flash your phone, it merely runs the image (pretty much as close as you get to risk free, other than sitting there with a tinfoil hat on )
See screenshot of the recovery image here:
http://www.sizzledcore.com/wp-content/uploads/2009/12/RA-hero-recovery-image-500x375.jpg
Make the Nandroid backup by choosing 'Nandroid Vx.x Backup' and waiting a while.
If your ROM needs a wipe first (most new ones do), select Wipe data/factory reset. You will lose all your user data on the device (but you've got a nandroid backup just in case)
You're now good to go. So choose "Apply sdcard:choose zip"
Now select the custom ROM zip file you downloaded. It doesn't even need to be called update.zip! Choose it from the list and push trackball.
Wait for the update.zip to go in. Do NOT turn off the device or pull the battery. First boot can take a very long time (upto 30 minutes). Just keep it plugged in via USB and wait...
As for radios, see http://android.modaco.com/content/h...-24-11-hero-roms-radios-in-update-zip-format/ and look at the section titled radios. The latest one is in bold. It is a .zip file as well, that you use these exact same instructions for to install (don't do the wipe or anything like that. Just install the .zip file)
anon2122 said:
@kendon,
I noticed he has the original, easily rooted version of the hero. IIRC, that is what I had on my G2 (and had the security unlocked bootloader out the box). If that's the case, would pvdeejay be able to 'fastboot boot' a full system img file for the purposes of testing it out to see if it meets the requirements.
The reason I ask is that I've only ever fastbooted my AmonRA recovery (I didn't flash it, because I never felt any need to). I'm guessing you could fastboot a full img, but I'm not sure about the practical issues of where it would be stored in memory...
Click to expand...
Click to collapse
this is correct so far, i did the same, except i installed the recovery. i play a lot with my phone, the installed recovery image with the nandroid backup is the best i have ever seen for a phone...
@pvdeejay
you always write so much...
i try to answer everything:
the two guides you posted are good for your situation. i never tried flashrec, but from what i read it is safe to use. i installed my recovery image through fastboot, the guide is here: http://android.modaco.com/content/h...ng-the-patched-recovery-image-on-your-device/
i have no idea how this works out for you, but my honest suggestion would be that you have someone seeing assisting you, you CAN brick your phone, though it is not likely if you follow the instructions precisely. the process is not very time consuming at all, so you don't need to bother anyone for days of their time.
edit: and now i read your post to the end and saw that your brother will be helping you, so you are on the right track
once you have the recovery installed you can make nandroid backups, and i would suggest that you do this first thing after installing the recovery, better make a backup too much than one too less...
the 5 steps you described are correct, except there is no need to rename the zipfile anymore, you can select any .zip from your sdcard.
the radio part is the number that begins with 63.18.55.06, then comes two letters and then more numbers. as by now the version can be identified by the letters, with JU being the up-to-date one. in general you can say the newer the better, but you have to try for yourself. start with the newest one, if you have problems go back.
thanks this seems to be pretty doable plus I will easily be able to restore the current data backed using nandroid backup.
Which android SDK do I need the latest one?
The commands I need to type are supposed to be typed on the PC or on the phone? I assume on the PC but I just would like to ensure.
Hero21 1.8 community edition has a recommended radio listed in the first post. Is it necessary to install that one as well? What should I install first the actual rom or the radio? Do I need installing radio at all? Should i do the same with radio i.e. renaming it to update.zip and using amonra to install it?
Also will I be able to use this method even if I install another rom (running amonra without actually flashing it)?
Edit:
sorry guys did not realize renaming to update.zip is no longer needed.
Edit2:
is there an easy way on how to access sd card from windows? I can't just remove the card from phone and insert it into my laptop because I don't have the proper adapter. Previously my boss was using the hero and perhaps it would be nice to backup the sd card first.
Edit3:
uhmmm, installing android sdk is perhaps not as simple as it sounds.
I have just seen this article.
I am on a limited gprs internet connection, can you please suggest sdk features I won't need to save some download bandwith?
- you need only the adb binary (thats adb.exe for windows) from the sdk, the rest is not needed for this.
- install the radio from the 2.1community-rom-thread, it is the newest. install the radio first. DO NOT PULL THE BATTERY until the phone has rebooted completely. if you pull the battery during radio upgrade your phone will be dead. it takes a few minutes, do not panic!
- you can copy the contents of the sdcard via the usb-cable, plug it into your pc and pull down the notification bar...
Do I need to run SDK Setup.exe when I have downloaded android sdk for windows?
Or can I simply run that binary from the command-line without the installation?
Do I need any USB drivers so my phone can be recognized?

Running Custom ROMs in SDK Emulator

I've been searching both google, and the xda forums all day trying to find a solution for this problem. I want to test certain functionalities of ROMS in the emulator. The problem is that I'm unable to get past the bootscreen animation on any ROM.
All the guides I've found are for Roms based on 1.5 and earlier.
My method thus far has been to nandroid backup my system, paste the system.img into a copy of the 2.1 API folder located in "platforms".
It's obviously trying to load the system, because it's showing the custom boot sequence, but fails at some point and goes into a loop.
Thus far, I've tried upping the RAM, Cache, and heap limit of the emulator, but to no avail.
So, I'm fairly new to Android myself and am still learning things daily. My first two thoughts are:
1) Aren't there some drivers in the system.img that are going to be device specific? So, you'll have to swap out the Eris stuff and insert some 'goldfish' drivers or whatever they call the emulated arch?
2) Logcat is your friend. Logcat it while it's booting up. That should give you some clues.
3) If you figure this out, please post the steps so that anyone else who wants to do the same will not have to start from scratch.
4) Isn't this fun?
gnarlyc
Indeed, will logcat it tonight and see what I can find through that.
I was looking for a way to make custom rom running in the emulator.anyone got a working 2.1 rom for emulator?

[Q] New to Root

So, I used to run WinMo way back when, and I'm familiar with flashing, HardSPL, blah blah blah, whatevs. I haven't done the rooting process yet on my phone because I'm finding it hard to find a few key things that I need.
-What is the effect on my phone when I root, in regards to data? Do I need to backup? If so, can I backup on my SD card or is everything wiped? What program could I use to backup?
-Are there any crazy little tweaks or tips that anyone has to help guard against a brick?
-I've read the pros and cons list, but can I get more details from someone? Can this help with battery life, allow me to flash my radio, increase general connectivity, etc.
All help would be greatly appreciated, and I'll plan on doing a donation today. I've just been out of the loop (running WinMo 6.5 style out of the loop:/) so some advice to a rook would be great. My goal is to get out of school and come home and root and fiddle with things with little to no problems. Thanks a ton everyone.
Dig Life!
D
The process of actually rooting doesn't mess with any of your stuff.
I use Titanium Backup to restore apps after flashing roms.
In general, most of this stuff COULD help your battery life, here there are Devs that will help - with sprint you get their tech support.
Well, I DL'ed TB and it says that I have to root first? Am I missing something here? Is it ok to root or will it delete all of my apps and what not? I mean, if it does, it isn't really that big of a deal, considering I can just download them again, I'm just looking for input.
copsgottanks said:
Well, I DL'ed TB and it says that I have to root first? Am I missing something here? Is it ok to root or will it delete all of my apps and what not? I mean, if it does, it isn't really that big of a deal, considering I can just download them again, I'm just looking for input.
Click to expand...
Click to collapse
I'm pretty new, too, but I think I can answer your questions. Rooting (at least with the One Click Method I used on my Epic) doesn't destroy any data/apps on your phone. It simply gives your user root access to the underlying OS. Once that is achieved, you can modify things and tweak things. Titanium Backup will let you backup all system files and data, but only AFTER rooting.
This is not a ROM flash or anything like that from the WinMo days. I haven't gotten that far on Android, so I'm not sure what the flashing options are yet, but rooting is harmless on its own. It will let you royally screw things up though, so once it is done, be careful what you do.
Well, I tried to do a few things like listed in the One-Click root thread, but I guess I'm just not getting it. Now that I know the effects of the root, I'd like to be able to actually do it, but I don't have enough details. I haven't ever rooted before, and I'm finding it confusing. What was listed in the one-click thread wasn't specific enough for me, I don't know if I need to run from SD card, what the ADB thing is, nothing. I was a WinMo master and I'm finally coming to Android which is literally worlds away from my comfortable norm.
what os are you running? the one click comes with everything you need. theres an osx version the windows version that noobnl updates and the linux version i maintain
I'm on Windows 7 64 bit. But I still can't get any of the one click stuff to work, I don't really know what exactly to do
copsgottanks said:
I'm on Windows 7 64 bit. But I still can't get any of the one click stuff to work, I don't really know what exactly to do
Click to expand...
Click to collapse
I wouldn't exactly call root harmless..in itself it is ok..but if you give root access to a program that program has FULL access to your system..aka anything inputed on your phone or stored on your phone can be accessed by the program with root access. Though generally its not a problem..just careful which programs you allow to use root access.
Also, at what point are you getting stuck? did you install the drivers? are you getting any sort of errors or etc?
There is also some good reading over at SDX Developers.
I have hacked and rooted before, WinMo, Palm, HTC Hero, but this one was tough. It basically took me two days off and on, but it worked - finally.
Downloading drivers is a b--h, they are finicky and I needed all of them, kept
hanging on 2. They are slow, and kept looking for sources.
Search here, there is good info, then look there (above) I used OneClickExploit 2.2.4 which finally worked. It had some of the same files
in other methods, but this one worked.
I'm not changing roms, did on Hero to 2.2 because they weren't getting upgrade but I'm just going to hang and wait for Froyo.
Good luck
copsgottanks said:
I'm on Windows 7 64 bit. But I still can't get any of the one click stuff to work, I don't really know what exactly to do
Click to expand...
Click to collapse
Download and unzip the one-click archive in to a folder. Double-click the run.bat. I had some problems where it would start and then hang. I often had to kill it and rerun the batch file. Sometimes I had to end task on the adb.exe process. Eventually after rebooting the phone, etc, I was able to get it to work. Not sure what the exact problem was. I think part of it was connectivity to the phone via usb. Connect through a port on your computer, not a hub.
Also, the batch file is just a bunch of commands. You can open a command line in the folder where the batch file is and run each line in the batch file individually from the command line. That will give you some idea of what is happening and where it might be failing.
Like I said, I had to stop and restart a bunch of time before it finally got through to the end of the batch file correctly. When it did, it was fast. Not sure what was happening.
gTen said:
I wouldn't exactly call root harmless..in itself it is ok..but if you give root access to a program that program has FULL access to your system..aka anything inputed on your phone or stored on your phone can be accessed by the program with root access. Though generally its not a problem..just careful which programs you allow to use root access.
Also, at what point are you getting stuck? did you install the drivers? are you getting any sort of errors or etc?
Click to expand...
Click to collapse
When I try to install the drivers I get this message:
"The MSS InstallWizard was not Completed for SAMSUNG USB Driver for Mobile Phones V1.3.450.0
The MSS InstallWizard was not successfully installed SAMSUNG USB Driver for Mobile Phones V1.3.450.0. Click Finish to exit the wizard.
And I'm basically stuck there. I've searched around and can't find any drivers that will work. Like I said, I'm on 64-bit Windows 7 with a clean OS and no previous negative install history. Not sure what the issue could be?
Found the drivers and everything that I needed and I'm rooted, but now I have one more question. I don't plan on flashing any roms, I'm alright with the stock rom, at least for now. I wanted to know what rooting will do in regards to over the air updates on my phone. Will I be able to OTA to FroYo when released? Any info would be great guys, thanks.
where did you find the drivers? I am having the exact same problem that you had where the installwizard cannot download finish installing the drivers for whatever reason

[Q] need help on the elocity a7

Everyone mod is working i geuss except for mines i don't know what am doing wrong.
i tried to mod mine with the dexter mod 1.41 and mines wont work,
1st- i download the file didn't unzip it then i sent it to the SD card and rename it "update.zip".
2nd- i did the factory wipe/reset then i select to wipe all data
3rd- i select update.zip but i notice an message saying( E. can't read from SD card, or something like that). i dont know if that is apart of the mod or what.
4th- when it is finish then i select reboot option and when it is done rebooting i get nothing new. can you help me out are do you know something that i might be doing wrong. i also did do the 1.42 patch aswell didn't work. are is there any other newer way to do it are what. Even if you can write step by step on how to do it properly.
PLEASE HELP ME OUT.
Did your a7 have a sdcard problem before the attempt ?
And even tho it sed it can't read sdcard, did it proceed to install anyway ?
yes it did go ahead with the installation, but it is during the installation process where i saw something about can't read error, i jus got it yesterday then i did the new update from elocity website. then i tried al,ost all of dexter's mod
these are the exat message i got was (E:can't open/usb/update.zip)
(E:Can't mount USB:update.zip)
then underneath that it say (Finding update package)
then it say (Wait for 5 second)
(Installation time out)
(installation aborted)
(Formatting MISC)
these are all the thing it say during installation
Does your a7 read, mount and unmount the sdcard stock?
What is the path to the update.zip?
Sorry for all the questions, I'm just trying to get on the same page
Sent from my Mynized EVo 4G
I'm having just about the same problem. Will be interested to hear any helpful suggestions. At this point, the only thing that is working is to do the factory reset and use the basic version again. I keep getting a message that "update.zip" (although I named it "Update.zip") is a bad file. I also did not get "apply sdcard:update.zip" as a menu option, only "apply:update.zip", which when clicked did read the sd card, then gave the bad file message.
update
Lemme clarify first then update. I bought the A7 in February and loaded the most current Dexter mod at that time. It's been running beautifully until this week. Over a period of days, the A7 started acting up until it was no longer usable at all. First, the BlueTooth cut out, then the WiFi, then it just got stuck and was repeatedly lighting up the Elocity logo, but never fully booting up.
Elocity support said to do the Factory reset, which I did and it was back to baseline again. Trying to install the latest version of Dexter is where my problem started. (end of history)
So, now the update for this evening: I tried every version of Dexter's mods and got the "bad" file message each time, even after downloading them again to be sure I wasn't using a corrupted copy. However, my A7 will wipe, then update with Elocity Firmware 2.0134 and read it just fine on the exact same SD card when renamed "Update.zip".
So, now I have a very frustrated boy with autism who can't do his Google Voice search anymore and the Android Marketplace doesn't let me download the apps I already bought for him. We're back to where we were when it arrived out of the box in February, but unable to restore what we had.
I have to think there's a conflict between Dexter's Mods and the new firmware, even after one wipes everything. I even tweeted Dexter (and I don't *do* Twitter!) to see if he could respond for help and am waiting for a response.
Can someone please help? Thanks!!
Sounds like your having issues with the files you download, I have gotten in the habit of not renaming the update file to just that until its on the usb card. Seen to many messages like yours if I saved one update over a prior with the same name. Try download 1.41 and 1.42 leave their names the way they are and save them to folder on your computer. Copy them bother to sd-card leaving names the same still. once both are there rename 1.41 to Update. Remove card from pc put in tablet. Use the recovery system method (press then hold power button method) do wipe, clear cache, the use update option. If this is successful which it should be delete the 1.41 file on card that you renamed to Update, this can be done on tablet or computer. Once that file is gone rename the 1.42 to Update and once again flash from recovery system.
Hope that solves your issue
Make it a habit to not save an update over top of another, though it seems like it would keep you from having to rename but for me it always seemed to corrupt the file.
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
cwolfpack3 said:
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
Click to expand...
Click to collapse
Do you end up with a folder or a zip file? Safari has a bad habit of extracting zips when it downloads them. Search my posts, there is a long ranting one that covers issues with both PC and Mac.
they're zipped ... I use Firefox 4.0, when the option comes up at download, I always click "save", not "open". Thanks, though.
well, problem solved. I ran Bestial's gapps patch over top of the new eLocity firmware and i have full functionality again. very happy mom here! now to reload all those apps for my boy! =D
Wow, I'm glad you found a solution...I have been following the thread and was getting worried.
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
bft305 said:
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
Click to expand...
Click to collapse
No. Your problem was that you were using a windows machine and your file extensions were hidden (I am psychic, but don't worry, I won't tell anyone your pin number). She is using a Mac, no hidden file extensions.
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
sbradby said:
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
Click to expand...
Click to collapse
bestialbub's patch for google apps (to use the market) can be found at http://forum.xda-developers.com/showthread.php?t=1019846 with the instructions
It's still working very well for us ... several weeks later.
Good luck!

Help! internal SD gone on my ideos7

can't seem to find any postings regarding the exact process on how to get my 8g internal SD back on my system that is why i ended up posting this. whenever i check it on the ideos, it is now disabled and it says unavailable. i also can't connect to my PC now via usb maybe because i don't have the internal SD. it happened when i try to partition my SD with Easyus Program in the hope that i may be able to install other programs into a more bigger space but then everything failed. I was already able to split it into 2 but i have slept over it and the next morning when i continued, i forgot where i have left last. i have tried to redo the whole thing all over again and started deleting the newly created partition and that was it. out of frustration and another hope that it might factory reset my unit in its original state and bring back my "unavailable SD". since then i can't get it back.
i have tried to browse all over here and also in other sites but there were no exact way how i will be able to get it available for use again. there are some that says i have to install the early android eclair version but there is just no place i can download that piece of os, not even on the huawei site. there are suggestions to use busybox and adb which i must admit that i have completely no knowledge of but willing to try if there will be guide to follow. the only problem on this way is my ideos7 can't communicate with my PC thru USB because of that missing internal SD card.
i hope somebody with a kind heart and knowledge can help me with this thing. i will surely appreciate it so much. this ideos is so dear to me and i just can't help to think the i ended up deleting its internal SD out of my stupidity.
thanks! you all have a nice day and continue enjoying your weekend.
details of my ideos7
it's a European Version, I guess this is the s7-104 with front camera only. It's running with the installed
Android Version: 2.2.2
Baseband: 504030
Kernel: 2.6.32.9-Ideos
Build Number: S7V100R001C98B021
I lost the rooting on the process and since then i can no longer have the way to root it back again because of the usb connection issue.
thanks again and hoping to get a big help from somebody out there.
UP
still hoping for anybody.
still hoping
for anybody who can help
Your problem, I think, has easy answer. You must to make a downgrade to android 2.1. In the huawei page you find the rom. in my case the problem is worse, my internal sd does not appear even as unavailable and i dont know to do.
regards
dead link
that's what i initially thought but all the links leading to this downgrade rom which is the 2.1 eclair, is already dead. i was lucky to find another but i see the fbi logo since it was the megaupload link. i have been looking for it even in the huawei site. everything is out already. i hope somebody out there has the Android 2.1 eclair that i can try. this i read from somewhere may be able to restore back my unavailable internal sd card.
thanks for reading and still hoping to get a copy or link for the android 2.1 eclair.
disregard all
i have found it already and it is back again. thanks a lot!
Same problem
I have the same problem as you. Can you send a link to the 2.1 eclair? I have searched for days...
1, the phone has root, and install better terminal emulator such as HyperTerminal simulation
2, in HyperTerminal, enter( su )
3, and so become the # sign, type ( dd if=/dev/zero of=/dev/block/mmcblk0 ). Other end of the run,maybe wait 5 minutes. Restart the phone.
4, into the "Settings" - "sdcard and storage", u can be formatted with the built-in sdcard

Categories

Resources