Buy HTC Vogue Clean ESN CDMA Set to eaby.com . & how to Use This Phone In India in CDMA Network. pls tell
I m read another Indian forum. HTC 6800/6900 convert to tata CDMA
here is detail
SID, NID, Primay Channer A & B, Secondary Channel A & B loaded Nam 1 & Nam 2 PRL, SPC = 000000
I got all above Parameter from Tata Customer Care and they told any Foreign ESN Handset can work if you are able to change the above Parameters, After that I Get an GSK (Getting Started Kit) of Tata which have 14 Digit Activation Number, then Dialed *228 and followed the Instruction, After 2 Hours (Tipical 10 Minutes they say) Received a SMS to Restart the Phone. Voila my HTC Mogul is Working on TATA
Will load my QPST .qct file (Ready made Setting for TATA) so every buddy can easily Activate Mogul on TATA
Everybody now Welcome to World of Tata Indicom
( Attached TATA.rar contains Nam1 PRL, Nam2 PRL, and Ready made QCN file for QPST Service Programming, also have GetSPC [ Run in PPC6800 / Mogul Type the ESN in Capital and get the Service Programming Code] )
Pls Help me
Hello
Where can i download GSK of tata.I want to connect my sprint 6800 to TATA.
km230580 said:
Buy HTC Vogue Clean ESN CDMA Set to eaby.com . & how to Use This Phone In India in CDMA Network. pls tell
I m read another Indian forum. HTC 6800/6900 convert to tata CDMA
here is detail
SID, NID, Primay Channer A & B, Secondary Channel A & B loaded Nam 1 & Nam 2 PRL, SPC = 000000
I got all above Parameter from Tata Customer Care and they told any Foreign ESN Handset can work if you are able to change the above Parameters, After that I Get an GSK (Getting Started Kit) of Tata which have 14 Digit Activation Number, then Dialed *228 and followed the Instruction, After 2 Hours (Tipical 10 Minutes they say) Received a SMS to Restart the Phone. Voila my HTC Mogul is Working on TATA
Will load my QPST .qct file (Ready made Setting for TATA) so every buddy can easily Activate Mogul on TATA
Everybody now Welcome to World of Tata Indicom
( Attached TATA.rar contains Nam1 PRL, Nam2 PRL, and Ready made QCN file for QPST Service Programming, also have GetSPC [ Run in PPC6800 / Mogul Type the ESN in Capital and get the Service Programming Code] )
Pls Help me
Click to expand...
Click to collapse
Hello
Where can i download GSK of tata.I want to connect my sprint 6800 to TATA.
Setting files for Reliance
Hi,
I have purchased HTC CDMA Touch from eBay.com.
Can you please help me using it on my reliance network.
Thanks and Advance.
Puneet
puneet_july30 said:
Hi,
I have purchased HTC CDMA Touch from eBay.com.
Can you please help me using it on my reliance network.
Thanks and Advance.
Puneet
Click to expand...
Click to collapse
Go to your carrier and ask them to add your device to your account. That is the simplest way to go about it.
ok....i already sim unlocked and thought i could use my phone with any sim card
i put in my boost sim and no such luck...it just keeps on searching....
i know it probably wont let me go online with out a t mobile or at&t data plan but no phone either WTF??
i apologise for being such a noob should of gotten in this whole mobile thing eons ago back when i got an old nokia back in 94 b4 ringtones were cared about and teen glamour over them
but plz let me kno what providers sims i should be able to use?
and is their a flash software to possibly get other services (noticed on some of the flashes on this site i can get european networks if i had a sim with them....can it be set for boost,sprint,verizon etc?
The only major sim card providers in the states that will work on a wing, would be
T-Mobile
AT&T
Corr Wireless
or any other GSM Providers
The one's that won't work are
Verizon Wireless
Sprint
Boost Mobile
Alltel
or any other CDMA,iDEN Providers
Hi guys,
I am a noob in Thailand and i just got vogue from e-bay.
Our carriers for cdma is "Hutch". All of the providing phone will use sim card to activate phone number. Thailand cdma is work on frequency 800x.
I just put sim card to my dopod818c/htc wave and copy MIN and then paste it back to my new vogue.
Thr result in Phone mode and cdma call status are searching.
What should i do?
Thank you ,
pook13 said:
Hi guys,
I am a noob in Thailand and i just got vogue from e-bay.
Our carriers for cdma is "Hutch". All of the providing phone will use sim card to activate phone number. Thailand cdma is work on frequency 800x.
I just put sim card to my dopod818c/htc wave and copy MIN and then paste it back to my new vogue.
Thr result in Phone mode and cdma call status are searching.
What should i do?
Thank you ,
Click to expand...
Click to collapse
Your next step should be load a PRL for your area, I'm not sure how Hutch does their PRL's there will be other things you will need such as your MCC, MIN/MSID, SID, MNC, NID, EVRC SETTING, IF THEY USE AN A KEY.
I know nothing about Hutch but most of these setting you may be able to find on your old phone.
I just recently bought a Rogers HTC Magic, rooted the phone, and unlocked it. Everything seems to work completely fine. At the moment however, I seem to be having an issue with a Bell Mobility sim card. Bell's HSPA sim works fine, and I seem to be able to use voice and data ok, but the problem lies in that their seems to be a roaming symbol ("R") on my reception bar. Im using the phone in my local calling area which is somewhat misleading to me.
Im using MyHero 2.0.5 ROM at the moment. Does anyone know why this is happening? Thanks in advance!
Agreed
I'm doing the same thing. I'm running cyanogens roms and I get the same thing. Best I can tell is that this is normal on the magic. Just be careful if you live near the border like I do.
I figured this was normal too. I guess i'll try other SIM cards to see what they say as well, thanks!
Ya I also have this phone running on Bell, wish I could get rid of the roaming. It also asks if I want to connect once in a while too.
Shouldn't the romaing be dictated by the sim? I have a bell sim, on the bell network, why do I get the roaming icon? is there a way to change the phone so it doesn't think it's a rogers and not roaming or something?
Are you sure you have the Bell APN Settings and not the Rogers Settings in the phone?
Settings -> Wireless Control -> Mobile Network Settings -> Access Point Names
If it says Rogers you're Roaming on the Rogers Network.
I put in the bell APN. I don't think we can even roam on rogers network, wouldn't work. Either way, it's the Bell APN.
I don't have a clue as to the differences between Bell and Rogers sims... but I can tell you that my HTC Magic, on Rogers, with a Rogers sim (duh), running Amon_RA's most excellent RAv1.6.2H only shows roaming when actually roaming.
I was in the US yesterday and watched it flip from a Rogers tower to ATT. I was watching to make sure it was not using any data when roaming on a US network. The symbol, lockscreen info and the carrier listed in the status pulldown all were updated correctly.
It might have something to do with the ROM you are running. However I bet that given the phone came from Rogers, it has some carrier info buried somewhere that it is comparing to the carrier you are on (Bell) and triggering the roaming status.
If you disable data when roaming in the settings menu, what does it do? If it disables data, then the phone thinks it is roaming, which would support my carrier data mixup theory.
I will try a different rom on the phone. Unless someone knows for sure what I can do to fix this.
If you disable roaming there is no data, because once in a while it prompts to connect, if you say no, you get nothing. Sometimes my wife must accidentally hit no (its her phone, she probably says no cause shes not sure what it does). I just want to make it so she does not get the prompt ever (settings are all set).
I have a rogers HTC Magic (unlocked) I'm using a fido sim, it thinks its roaming as-well but I have only fido apn settings. It only roams with certain roms and radio's. I can use alot of roms eg. cyanogen,Hero HOFO 308,GYD 2.1.1 without roaming but when I update radio and flash cursorsense roms it thinks it is roaming. I have to enable data roaming in order to get a 3G signal. as a fido user I dial *#123# to see if I'm in my local zone zone. A fido tech rep told me that most unlocked phones indicate roaming because of the phones hardware programing. The hard programing of the phones checks the sim and sees that it is using a diff sim card and starts indicating roaming when in fact you are not. A rogers salesman also told me the same thing. He said as long as your carrier is displayed on your phone homescreen then you are good.
I have the AT&T Tilt, not running the AT&T ROM. I've tested a few different SIM cards on my phone and here's what I've found:
Rogers: Roaming works correctly. In Canada, no roaming indicator, in the USA, roaming is indicated correctly.
Telus & Bell (HSPA): Roaming indicator always on.
I've heard that this may be due to the SIM card listing more than one Mobile Network Code: 302361, 302653, 302657 (original Telus CDMA networks, not compatible with the phone or any kind of SIM-based network so it's uncertain why it would be on the SIM card), PLUS the HSPA network code 302880. It's possible that the phone is not reading that far into the list on the SIM and therefore does not know that 302880 is a home network.
Tilt 2 Roaming Triangle and telus
I'm on Telus and have a Tilt2. The original ROM that came with the unit didn't show the roaming triangle. I have attached some screen captures of the ROM. I've attached a copy of the registry (Remove the .cab it was the only way I could get it to upload).
I'm now running Jackos rom and it does show the roaming triangle.
Hopefully somebody can find where the settings are located and hopefully it's contained in the registry.
Have the same problem on the Stocks ROGERS 1.5 Rom. Sales associate said you should not get roaming charges since you aren't actually roaming and if you do, just contact your phone provider.
rogers htc dream unlocked now on roaming?
i also have a htc dream from rogers unlocked not rooted and my bell sims card works like my phone calls and my text but i can't get my data to work and when i click on the apns theres not thing and i am not able to adjust anything in there, if anyone can help it would be great, so pretty much the bell sims card works but i cant use my data and it says im roaming
hol17 said:
Have the same problem on the Stocks ROGERS 1.5 Rom. Sales associate said you should not get roaming charges since you aren't actually roaming and if you do, just contact your phone provider.
Click to expand...
Click to collapse
i also have a htc dream from rogers unlocked not rooted and my bell sims card works like my phone calls and my text but i can't get my data to work and when i click on the apns theres not thing and i am not able to adjust anything in there, if anyone can help it would be great, so pretty much the bell sims card works but i cant use my data and it says im roaming
Click to expand...
Click to collapse
If you aren't outside of Canada and you get the roaming symbol; they can not charge you roaming fees.
Roger and Telus PLMN Compared
I'm not sure if this will help,
I have attached a picture of the PLMN from a Rogers sim and a Telus sim
Maybe someone knows how to adjust the information on these lists.
Dave778 said:
A fido tech rep told me that most unlocked phones indicate roaming because of the phones hardware programing. The hard programing of the phones checks the sim and sees that it is using a diff sim card and starts indicating roaming when in fact you are not. A rogers salesman also told me the same thing. He said as long as your carrier is displayed on your phone homescreen then you are good.
Click to expand...
Click to collapse
The phone companies in Canada must be less uptight about unlocked/rooted phones
If you asked those questions to a t-mobile or at&t rep, they would straight up refuse to talk to you
American cell phone companies are still stuck in the "Ma Bell" mentality, where everything that touches their network must be under their control
anyone figure out a fix? I'm having these roaming issues as well on the bell network with unlocked at&t phone.
I have Same probleme Here, Bell on a AT&T Tilt 2 phone, Always get Roaming message.
any registry edit or mod available to make it work without these message ?
thks
BiOs2k said:
I have Same probleme Here, Bell on a AT&T Tilt 2 phone, Always get Roaming message.
any registry edit or mod available to make it work without these message ?
thks
Click to expand...
Click to collapse
I searched around to a fairly moderate extent and I have found many people with the same problem, yet I can't find any resolution to this issue.
I'm not even sure where the issue lays. Is it with the hardware/firmware? SIM card? Windows Mobile? Is it the rilphone.dll? or maybe some registry entry. Maybe it's on the Bell network side?
Someone told me they put a Rogers SIM into their Fuze and it didn't show up as roaming, yet when they put a Bell SIM in, it's back to roaming. So what's the difference between Bell and Rogers?
Here's a question for anyone who has this problem, when you boot android does it still show as roaming?
I tried searching everywhere and still no answers.
Does anyone know if it is possible to flash the Htc Hd2 to cricket or metropcs.
they are network providers, so i assume you mean unlock the phone to use them?
no flashing will not do that. you would need the network unlock code, however isn't metre cdma? if it then the hd2 cannot work on it.
Yes as long as the network uses GSM (sim cards )
So theres no way htc hd2 can be turned into cdma and be flashed to metro or cricket?
you cannot flash a phone to unlock it. as stated above you need the unlock code, you can get this from your network provider for approximately £15 just tell them you are leaving the country for a holiday and want to change your sim card to a local network sim card in the other country (to get a better rate). If you would prefer you can easily unlock your phone on the internet, again for aground £15-£20, just search on Google.
as for your other question about cdma im not to sure.
re: cdma i'm only 95% sure but i think you're out of luck, i think its a whole different hardware.