[Q] Help!!!! - HD2 Android Q&A, Help & Troubleshooting and Genera

i had installed the Magldr v1.12 and trying to install the version 1.13 but showed up that "Readme.txt for this release is missing". What goes wrong???
One more thing. when i load into "boot ad sd", it come out something like this after go go go.
ClockworkMod Recovery v3.0.0.5
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/command
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
i can't install any android zip file to the system, but i can install any nand android, window 6 or window 7 without any problem. Before install the magldr, i had format my phone using task29. what goes wrong? help help help.. thanks

r u sure u installed CWR correctly ? its look like u have messed up with it.
Try to reinstall CWR and that should work after
follow this ClockWordMod Recovery by RaiderX303
Thanks go to user RaiderX303
chuaws said:
i had installed the Magldr v1.12 and trying to install the version 1.13 but showed up that "Readme.txt for this release is missing". What goes wrong???
One more thing. when i load into "boot ad sd", it come out something like this after go go go.
ClockworkMod Recovery v3.0.0.5
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/command
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
i can't install any android zip file to the system, but i can install any nand android, window 6 or window 7 without any problem. Before install the magldr, i had format my phone using task29. what goes wrong? help help help.. thanks
Click to expand...
Click to collapse

1/ Nothing wrong, it's just a warning!!!! Just clic next.
This just means that in the build you try to flash the dev doesn't put a readme to be displayed.
2/ if you use the latest CWM you have to use "AD Recovery".
The only thing which is wrong is that you read the explanations a little bit to fast. Read carefully the warning or explanations before asking.
Anyway, hope I have helped

thanks for reply. i had successfully installed the magldr v1.13 but when i load into AD Recovery, it said "no boot sources". i think i messed up everything. because i had format the phone using Task29. Before that it works fine everything for me to load android using v1.13 with zip files. after i format it i seem like system messed up already. i need help. About the nand build i installed, not all the android successfully load. what happen to my phone?

Ok, you have installed MAGLDR.
So now you have to install CWM (download it, go in MAGLDR, choose USB Flash and launch DFT to install CWM).

@truc007
he just need to follow the link on the top for RaiderX303 post.
Its all there, easy step by step procedure. He done a great job with it and the procedure so its no point to write it all over somewhere.
@chuaws
m8, just look into that link from my first post, thats definitely help u. There is no way u will not do it. Just follow it step by step.
truc007 said:
Ok, you have installed MAGLDR.
So now you have to install CWM (download it, go in MAGLDR, choose USB Flash and launch DFT to install CWM).
Click to expand...
Click to collapse

@rikardo1979 : you're right, didn't pay attention to your link.
If he asked the question again 12h after you gave the solution... it could make us think that our answers are useless... I better go to bed now.

rikardo1979 said:
r u sure u installed CWR correctly ? its look like u have messed up with it.
Try to reinstall CWR and that should work after
follow this ClockWordMod Recovery by RaiderX303
Thanks go to user RaiderX303
Click to expand...
Click to collapse
the answer to your question is that you have install a recovery file"400mb",that is corrupt or something like that!When you install madgr,try to install again a 250 mb recovery file,not 400 mb,and you problem will disappear!Sorry for my english and this is 100% guaranteed !byee

it took me about 4 hours of hard work to get the sollution)!I thought that I've broke my phone

Related

[Q] mount external sd in recovery

hi,
i use Reflex rom from Civato (many thanks Civ:good.
Everything work fine in normal use (also the data/file in external microsd)
My first problem: when i install V8UNLOCKED multi ICS BOOTLOADER installed whit CWM
the process end fine but in recovery i see at the top: CWM Recovery v5.5.0.x(thor2002ro/digitex rev1.7.3)
And, after istallation when i back to Power menu i have:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
The second problem, maybe connected whit the first:
Each time i try to install a rom update from external sd i have the following message :
E:Can´t mount /sdcard/
If I remove my SD, and insert it again, it mounts and i can update the rom.
I'v tried to wiping cache & dalvik partitions but both problems remain...
p.s.sorry for the mistakes in English and the noob questions..
cirovi said:
hi,
i use Reflex rom from Civato (many thanks Civ:good.
Everything work fine in normal use (also the data/file in external microsd)
My first problem: when i install V8UNLOCKED multi ICS BOOTLOADER installed whit CWM
the process end fine but in recovery i see at the top: CWM Recovery v5.5.0.x(thor2002ro/digitex rev1.7.3)
And, after istallation when i back to Power menu i have:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
The second problem, maybe connected whit the first:
Each time i try to install a rom update from external sd i have the following message :
E:Can´t mount /sdcard/
If I remove my SD, and insert it again, it mounts and i can update the rom.
I'v tried to wiping cache & dalvik partitions but both problems remain...
p.s.sorry for the mistakes in English and the noob questions..
Click to expand...
Click to collapse
It says
E:Can´t mount /sdcard/
Click to expand...
Click to collapse
? The MicroSD card that you can remove from the top should mount as /external_sd/
As for the messages about not able to open the log files could be...
1. The logs do not exist
2. The mount or location its referencing does not exist or is not mounted
3. They exist but you have no permissions to get to them
Sorry I cant be of much help in resolving... I am sure someone will pop on with a solution for you...
Wedee said:
It says ? The MicroSD card that you can remove from the top should mount as /external_sd/
As for the messages about not able to open the log files could be...
1. The logs do not exist
2. The mount or location its referencing does not exist or is not mounted
3. They exist but you have no permissions to get to them
Sorry I cant be of much help in resolving... I am sure someone will pop on with a solution for you...
Click to expand...
Click to collapse
Right. The log files do non exist in sdcard. or in external_sd.
But. why I see. :CWM Recovery v5.5.0.x(thor2002ro/digitex rev1.7.3) at the top after I install the V8UNLOCKED ?
And what about the probmem whit read the external_sd in recovery mode:
E:Can´t mount /sdcard/
If I remove my microsd and insert it again, it mounts perfectly ?

[Q] Stuck in DFT MAGLDR and ClockworkMod Recovery, searched with no solution

Stuck in DFT MAGLDR and ClockworkMod Recovery, searched with no solution
I got the stock WM6.5 Tmous with radio 2.15.50.14 used HSPL4
I've done the MAGLDR stuff with no problem. (I was shocked after flashing MAGLDR as I can't boot into my WM6.5, then I realized MAGLDR is for Nand-droid only)
Then I went to the next step, individually install/flash the ClockworkMod and now here's the problem. I followed 100% of this step by step guide and thinking that it would be less risky as it's already "step by step"ed for people. I chose the method 1 for Installing ClockworkMod Recovery. After I finished steps 15., it automatically rebooted instead of letting me choose to reboot. And all the steps later on are not available in my situation as my phone rebooted to ClockworkMod Recovery. I can't turn off my phone or boot to MAGLDR, it reboot to ClockworkMod Recovery every time I power it up. I try to install an Android from SD card but I found the log saying:
ClockworkMod Recovery v.3.0.0.5
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/command
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't mount /cache/recovery/command
E:Can't find misc
I used HSPL4, may be that is the problem..??
I am sure I was missing some steps, now I don't know what to start with.
Please tell me what can I do! It would be much appreciated!
The thread I followed http://forum.xda-developers.com/showthread.php?t=939682
Resources downloaded from there either
looks more like the flash.cfg settings for the size of the cache is wrong.
open teh flash.cfg file in notepad, , paste here what it says.
samsamuel said:
looks more like the flash.cfg settings for the size of the cache is wrong.
open teh flash.cfg file in notepad, , paste here what it says.
Click to expand...
Click to collapse
Thanks for replying, where can I locate the flash.cfg?
To the best of my knowledge, I think I missed that step and I don't even have a ROM installed in the phone yet.
Thanks in advance.
depends how you flashed clockwork,,,,, if you used teh nand tookit, then that is all taken care of for you, , if you sued the daf.exe version, then look in the folder where daf.exe is and there will be a file called flash.cfg (DONT confuse it with the file also there called flash.cfg.txt).
the process made simple...
instal the nand toolkit
into bootloader
connect usb
flash magldr (youve probably already done this)
restart
into magldr menu,
USB flasher
run the nand toolkit
choose the size system partition you require (it will be stated in eth first post of whatever rom you want to install, , lets say 160mb for example) by clicking 160 in the numbers down the left,
below that is a box called cache, it probably says 45, you can set that to 5 if you want, or leave at 45, or whatever you like, it doesnt matter
click repartition
into teh magldr menu
8 - ad recovery -- this starts clockwork
(assuming the .zip file for teh rom you want is already on teh sd card)
in clockwork choose 'instal zip from sd - choose zip'
select teh .zip file you already put on the card, and thats it, done.
i'm gonna try, it won't brick the phone, right?
samsamuel said:
depends how you flashed clockwork,,,,, if you used teh nand tookit, then that is all taken care of for you, , if you sued the daf.exe version, then look in the folder where daf.exe is and there will be a file called flash.cfg (DONT confuse it with the file also there called flash.cfg.txt).
the process made simple...
instal the nand toolkit
into bootloader
connect usb
flash magldr (youve probably already done this)
restart
into magldr menu,
USB flasher
run the nand toolkit
choose the size system partition you require (it will be stated in eth first post of whatever rom you want to install, , lets say 160mb for example) by clicking 160 in the numbers down the left,
below that is a box called cache, it probably says 45, you can set that to 5 if you want, or leave at 45, or whatever you like, it doesnt matter
click repartition
into teh magldr menu
8 - ad recovery -- this starts clockwork
(assuming the .zip file for teh rom you want is already on teh sd card)
in clockwork choose 'instal zip from sd - choose zip'
select teh .zip file you already put on the card, and thats it, done.
Click to expand...
Click to collapse
Here we go~ weird....I have neither flash.cfg.txt nor flash.cfg.
Can I directly use the toolkit? :cyclops:
Also, the toolkit download link doesn't work.
http://forum.xda-developers.com/showthread.php?t=1090783
NokiaBigS said:
Here we go~ weird....I have neither flash.cfg.txt nor flash.cfg.
Click to expand...
Click to collapse
thats the magldr installation fileset, easy to confuse since theres a daf.exe in there too. When you get the cwm installer, that too uses daf.exe
....
however you can avoid the need for this by...
,,,,
Can I directly use the toolkit? :cyclops:
Also, the toolkit download link doesn't work.
http://forum.xda-developers.com/showthread.php?t=1090783
Click to expand...
Click to collapse
...
using the toolkit, if you can find a working download. Look through the last dozen pages of the toolkit thread, im sure there will be some active mirrors in there.
samsamuel said:
thats the magldr installation fileset, easy to confuse since theres a daf.exe in there too. When you get the cwm installer, that too uses daf.exe
....
however you can avoid the need for this by...
,,,,
...
using the toolkit, if you can find a working download. Look through the last dozen pages of the toolkit thread, im sure there will be some active mirrors in there.
Click to expand...
Click to collapse
SUCCESSFULLY installed android 4.0.4
All works fine!!!!!!!!!!!!!!!!!!WORK LIKE A CHARM!
SOLVED ISSUE
NokiaBigS said:
Stuck in DFT MAGLDR and ClockworkMod Recovery, searched with no solution
I got the stock WM6.5 Tmous with radio 2.15.50.14 used HSPL4
I've done the MAGLDR stuff with no problem. (I was shocked after flashing MAGLDR as I can't boot into my WM6.5, then I realized MAGLDR is for Nand-droid only)
Then I went to the next step, individually install/flash the ClockworkMod and now here's the problem. I followed 100% of this step by step guide and thinking that it would be less risky as it's already "step by step"ed for people. I chose the method 1 for Installing ClockworkMod Recovery. After I finished steps 15., it automatically rebooted instead of letting me choose to reboot. And all the steps later on are not available in my situation as my phone rebooted to ClockworkMod Recovery. I can't turn off my phone or boot to MAGLDR, it reboot to ClockworkMod Recovery every time I power it up. I try to install an Android from SD card but I found the log saying:
ClockworkMod Recovery v.3.0.0.5
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/command
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't mount /cache/recovery/command
E:Can't find misc
I used HSPL4, may be that is the problem..??
I am sure I was missing some steps, now I don't know what to start with.
Please tell me what can I do! It would be much appreciated!
The thread I followed http://forum.xda-developers.com/showthread.php?t=939682
Resources downloaded from there either
Click to expand...
Click to collapse
Hello mate, I seem to recall something on some instructions I had saying Android will only work with an HSPL 2.08 or lower. I may be wrong as it's been about 6 months since I started and I continue to use it as I use the HD2 toolkit (I must say it's helped me MANY times) which I would highly recommend to anybody! If you want send me a PM and I'll hunt out the instructions I had and send you them as that with the Toolkit have never failed me yet
NokiaBigS said:
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/command
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't mount /cache/recovery/command
E:Can't find misc
Click to expand...
Click to collapse
you get this when you run cwm from the sd card, , its basically saying there is no cache partition set up (or it cant find one) its not usually a problem. I flashes yesterday using sd cwm, received this same list of errors, and teh flash went ahead fine.
daddyrichie said:
Hello mate, I seem to recall something on some instructions I had saying Android will only work with an HSPL 2.08 or lower. I may be wrong as it's been about 6 months since I started and I continue to use it as I use the HD2 toolkit (I must say it's helped me MANY times) which I would highly recommend to anybody! If you want send me a PM and I'll hunt out the instructions I had and send you them as that with the Toolkit have never failed me yet
Click to expand...
Click to collapse
MAGLDR only works with HSPL 2.08
cLK will work with any HSPL I think (at the very least it works with HSPL 3.03), but there's a common misconception that it only works with HSPL 2.08 because in mskip's guide (see the link in my sig) it's stated in big, bold red lettering that you need HSPL 2.08, and many don't realise that that only applies to MAGLDR. Hope this clears things up for you

A500 inexplicably bricked

Dear Experts,
Happy New Year
This is my first actual post on xda-developers but I rooted my beloved A500 with the advice on here just over a year ago.
The other night I plugged my device in to charge, all was well. When I woke in the morning the device was off, booting it would only take me to the first screen which shows the Skrilax_CZ ROM welcome screen. I tried booting it a few times, as you do, and each time I got the same result.
I was able to enter the boot recovery menu fine.
In green text I got the following:
E: can't mount cache/recovery/command
Under that it said:
E: Can't mount /sdcard/
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
I am able to get into APX mode, I only know this because the 'blackthund3r A500 Manager' is able to see the device when I try to manually put it into APX mode. I don't know if it helps at all...
I am now unable to get into the boot recovery mode since playing with the A500 Manager ion APX mode.
I found a similar thread:
http://forum.xda-developers.com/showthread.php?t=1953751
This suggests it is proper broken.
Does anyone have any advice on what I can try? If the device is dead then is there any way to retrieve my data which is not on the SD card?
Many thanks to you all,
Robbie
RoverP4 said:
Dear Experts,
Happy New Year
This is my first actual post on xda-developers but I rooted my beloved A500 with the advice on here just over a year ago.
The other night I plugged my device in to charge, all was well. When I woke in the morning the device was off, booting it would only take me to the first screen which shows the Skrilax_CZ ROM welcome screen. I tried booting it a few times, as you do, and each time I got the same result.
I was able to enter the boot recovery menu fine.
In green text I got the following:
E: can't mount cache/recovery/command
Under that it said:
E: Can't mount /sdcard/
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
I am able to get into APX mode, I only know this because the 'blackthund3r A500 Manager' is able to see the device when I try to manually put it into APX mode. I don't know if it helps at all...
I am now unable to get into the boot recovery mode since playing with the A500 Manager ion APX mode.
I found a similar thread:
http://forum.xda-developers.com/showthread.php?t=1953751
This suggests it is proper broken.
Does anyone have any advice on what I can try? If the device is dead then is there any way to retrieve my data which is not on the SD card?
Many thanks to you all,
Robbie
Click to expand...
Click to collapse
All i can suggest is you power down tablet , remove sdcard and put it in a card reader to save any data on it / format it / put it back in n see if u can do recovery ? or use different sdcard ?
brysie said:
All i can suggest is you power down tablet , remove sdcard and put it in a card reader to save any data on it / format it / put it back in n see if u can do recovery ? or use different sdcard ?
Click to expand...
Click to collapse
Hi Brysie.
I have had the SD card removed while I tried working on it so that I wouldn't risk affecting my data on it. I seem to get the same results now whether I have the SD card inserted or not. Although I just had another try and it is now allowing me to enter the recovery mode again which it wasn't a couple of hours ago.
I am north east of the Shetland Islands on an oil rig just now and I didn't bring my card reader with me. I will try what you suggest when I get home which will hopefully be within a couple of weeks.
Hey RoverP4,
I was wondering if you manage to find a fix to this? I have had an extremely similar bricking. My message is a little different.
Code:
E:Can't mount /cache/recovery/command
Kernel: thor-kernel_v1.16mini
Updates on TegraOwners.com
Setting CPUO & CPU1 to 1GHz...
Done!
Fixing A500 Boot/Recovery Chechsums...
Running itsmagic
Done!
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/reovery/last_log
E:Can't open /cache/recovery/lazy_log
Thanks for any help.
RoverP4 said:
Hi Brysie.
I have had the SD card removed while I tried working on it so that I wouldn't risk affecting my data on it. I seem to get the same results now whether I have the SD card inserted or not. Although I just had another try and it is now allowing me to enter the recovery mode again which it wasn't a couple of hours ago.
I am north east of the Shetland Islands on an oil rig just now and I didn't bring my card reader with me. I will try what you suggest when I get home which will hopefully be within a couple of weeks.
Click to expand...
Click to collapse
Robert417919 said:
Hey RoverP4,
I was wondering if you manage to find a fix to this? I have had an extremely similar bricking. My message is a little different.
Code:
E:Can't mount /cache/recovery/command
Kernel: thor-kernel_v1.16mini
Updates on TegraOwners.com
Setting CPUO & CPU1 to 1GHz...
Done!
Fixing A500 Boot/Recovery Chechsums...
Running itsmagic
Done!
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/reovery/last_log
E:Can't open /cache/recovery/lazy_log
Thanks for any help.
Click to expand...
Click to collapse
You can try running babsector (search on the forum), that will attempt to repartition and format.
If that doesn't work then it is most likely due to hardware failure of the eMMC chip, so a motherboard replacement is the only real solution. Same thing happened to me, cannot install anything on it as nvflash cannot write to the device. Haven't gotten around to replacing the motherboard.
Install Skrillax_CZ's bootloader.
Install TWRP (I use version 2.4.0.0).
Wipe System and Cache partitions.
Install a compatible ROM. If you want something fairly vanilla, give Lightspeed a try.
Thanks for the suggestion. But Im almost sure the mother board was fried. It wouldn't let me mount the SD or flash drive. So I couldnt install anything. Replacing the MoB wasnt that hard. Heck I took it out 3-4 times.
apapousek said:
Install Skrillax_CZ's bootloader.
Install TWRP (I use version 2.4.0.0).
Wipe System and Cache partitions.
Install a compatible ROM. If you want something fairly vanilla, give Lightspeed a try.
Click to expand...
Click to collapse

[Q] How do I recover from boot & recovery mode problems?

This is a rewritten version of an earlier post.
I haven't been able to boot my TPT for about two weeks now. At first it was stuck on the spinning "CyanogenMod" logo, and would go no further; now it's stuck on the Lenovo logo. If I boot into CWM recovery (which usually takes several attempts; the first few times result in a black screen), first I get a list of errors:
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
I can't apply any of the format zip files, as any attempts to apply a zip file from either the sd card or the external sd card results in an error:
E:Can't mount /sdcard
or
E:Can't mount /external_sd/
I've tried wiping the cache and the Dalvik cache, but so far nothing has allowed me to reformat the system and boot into it. This is all very frustrating. I don't mind wiping the entire system and starting from scratch - but I would like my tablet back!
Is there any way of overcoming these "Can't mount" errors?
(I read somewhere that one option is to reformat the SD card with FAT32 and install the ROM from there; dunno if that will work through.) Anyway, suggestions are very welcome!

recovery error after downgrade to stock froyo from aurora

hello my phone is almost bricked i think...
i formatted my sd card(fat32) and put froyo dload folder to root,then the phone started so called updating and it says completed..then it rebooted few times and goes to android system recovery and error come like
e:cant mount @ (or /dev/block/mmcblk0p6)
(invalid argument)
e:cant mount cache:recovery/command
e:--->open cache partition failed
e:cant mount @ (or /dev/mmcblk0p6)
(ivalid argument)
and so on
please help me i really wanna use cm7 after downgrading
niggaswitcher said:
hello my phone is almost bricked i think...
i formatted my sd card(fat32) and put froyo dload folder to root,then the phone started so called updating and it says completed..then it rebooted few times and goes to android system recovery and error come like
e:cant mount @ (or /dev/block/mmcblk0p6)
(invalid argument)
e:cant mount cache:recovery/command
e:--->open cache partition failed
e:cant mount @ (or /dev/mmcblk0p6)
(ivalid argument)
and so on
please help me i really wanna use cm7 after downgrading
Click to expand...
Click to collapse
In recovery select Wipe Factory Reset
Then Wipe cache and then reboot.
It should work.

Categories

Resources