Soo... I think the USB port on my T-Mobile HD2 is gone. I can feel it jiggle around when I plug in a USB cable... that and nothing happens when I do. No charge, no USB notification, nothing. Not even plugged directly into the power adapter.
My question is whether anyone knows any way to repair the phone for cheap? I've taken the phone to several cell phone repair shops, but no one can do anything without sending it off to HTC. If they do that, then HTC will charge me a crapload because the custom software on the phone somehow must've caused a hardware problem. Because the USB port is broken, I can't flash back to factory, soooo... there's nothing I can do there either.
Any help or advice would be appreciated. Thanks!
My first and only suggestion is to look for the not working phone body of HTC HD2 at ebay.com or similar. If You have some manual skills it wouldn't be so hard to replace it by Yourself. Of cause it is almost open heart surgery but it is possible to do by DIY.
If something like this would happen to me I would do so. You can look for only micro USB port to take it away from other non-working device like old camera or mp3 player or other phone.
Why they decide to use mcroUSB instead much solid miniUSB i don' know.
You can also look for micro USB connector
here
You can put a stock winmo rom (LEOIMG.nbh) on the root of your sd card and boot up into bootloader by holding the volume-down button while booting. Then the bootloader will detect the .nbh and ask you to press a certain button to install it. Then you can send the phone off to htc, it will be completely stock.
-HD2 Android-
huggs said:
You can put a stock winmo rom (LEOIMG.nbh) on the root of your sd card and boot up into bootloader by holding the volume-down button while booting. Then the bootloader will detect the .nbh and ask you to press a certain button to install it. Then you can send the phone off to htc, it will be completely stock.
-HD2 Android-
Click to expand...
Click to collapse
Wish I could, but apparently the cell phone repair shop that tried to fix my phone decided to tell HTC about my custom ROM though he told me he would be doing the repairs (only reason I left the custom ROM on there). But they actually decided to ship it to HTC. HTC decided to record the serial number so I can't send back to them anyways. =/
About the DIY repair. Would it just be a case of re-soldering the USB port back on the phone? Or is it something more technical? I'm asking because the cell phone repair shop I tried out said that they needed to replace that entire board. AFAIK, that board is the mainboard. Doing so would require buying another HD2 body, but I'm afraid that would cost far too much as I am a college student with ridiculous school fees and a very low income.
1: aww dude that sucks, they got you by the serial #
2. I have a broken micro-usb too, saw the disassembly vids, and it looks to me that the m-usb port is attached to the mainboard, and you have to consider too that if you try this as a DIY project, people have had wifi coax become damaged, lcd/digitizer damage, who knows what else from 'professional' repairs, let alone doing it yourself.
2 options, get a card reader and an external hd2 battery charger (and preferably a spare battery), or have the micro-usb port fixed by someone else or by your self.
The external charger and spare battery is cheaper by far, i paid only like $8 for each, and it's surprisingly reliable and practical.
Hope i helped
-HD2 Android-
i would totally call out on that shop and demand they fix it, since they ruined your warranty by sending it off to htc without your consent..
also, search on ebay, theres a cellshop in texas that repairs the port for $50, you mail it to them takes about a day and they mail it right back.
That sucks...I feel like the micro USB on my hd2 is about 2 die...if the phone moves at all connection and charge is lost. why oh why did these bums pick micro USB there's got 2 b a reason
To me is a serious design flaw...I mean its only a matter of time b4 the micro USB will fail on each and every hd2 regardless of how much u baby it device (which most of do)...after a certain number of charges the port goes bust
IMO the micro usbs put 2 much pressure on the port itself it's simply not big enough/solid enough of a connection to support the weight of the wire itself and over time gravity loosens and destroys ur port until u can't even.charge
Sent from my HTC HD2 using XDA App
I agree, the micro-usb is crap. Had my hd2 for like 2 weeks and i broke it by the charge cord getting caught on my foot, sending the phone flying. Luckily, i found that i could get a connection to my comp by holding the cable 'just right', flashed magldr and cwr, and just charge my batteries on the external charger now. I was stuck on the winmo 'test' rom for like 6 months lol.
-HD2 Android-
huggs said:
I agree, the micro-usb is crap. Had my hd2 for like 2 weeks and i broke it by the charge cord getting caught on my foot, sending the phone flying. Luckily, i found that i could get a connection to my comp by holding the cable 'just right', flashed magldr and cwr, and just charge my batteries on the external charger now. I was stuck on the winmo 'test' rom for like 6 months lol.
-HD2 Android-
Click to expand...
Click to collapse
dude same thing happened to me yesterday i was charging my phone and i got up to do something. And the cord caught on my foot and the phone went flying also. and when i tried to charge its like if you move the phone even the slightest it looses connection. But i found a fix that worked for me. im using my external hardrive cord to charge. the connection is a little thicker and fits in there perfectly so now i can move it and it stays connected... Only downside to me is the cord is really short
pyrorob said:
i would totally call out on that shop and demand they fix it, since they ruined your warranty by sending it off to htc without your consent..
also, search on ebay, theres a cellshop in texas that repairs the port for $50, you mail it to them takes about a day and they mail it right back.
Click to expand...
Click to collapse
Yeah, I railed at him for a good 10min in the shop with customers looking (hope I drove away some of his business...). He said that he couldn't fix my phone because I had *illegal software* on it... really? I doubt that a software problem caused the microUSB port to just break off the mainboard.
I've also looked at the disassembly video, and it doesn't seem impossible, but the cost of a micro-usb port is around $35 from what I gather. I think it would take some soldering to replace it, but I have neither a solder nor the experience to attempt it the first time on a $400 device.
I guess I'm stuck with the microSD adapter and external charger for now. ~sigh~ Maybe I'll try another internet-based cell repair shop. Anyone know anything about cellulardr.com? It's based just a couple miles from where I live and they have the part in-stock with a 50% discount that brings the price for repair down to $35 + $35 for parts which is a little high... but if it gets the job done...
I'm a [fraught] example of the result of thinking the usb would somehow last if I was just gentle. Who was I kidding, it was shot to pieces.... I've dropped £100 fixing the phone's screen which resulted in the volume buttons and vibrator dying (I argued till I was blue in the face- before I demanded they reglued the screen back on, a day after it had been 'fixed')... Damn crappy little repair shops, no leg to stand on.
And now I can't charge it.
Waited 2 days for a wall charger (and believe me that was hard as it's my work phone) to find that nomatter how long it's charged for it's dropping from 80% to dead in about an hour no activity.
I wouldn't mind so much but to have finally found a rom I liked, right through from WM to SD android versions to now Cotullas Nand, I'm reluctant to give it up, even though it's more than likely on it's last legs.
Why do phone manufacturers make crakcing phones which **** hardware and builds?
<rant over>
jemma132 said:
Why do phone manufacturers make crakcing phones which **** hardware and builds?
Click to expand...
Click to collapse
You answered that question yourself when you said:
I'm reluctant to give it up, even though it's more than likely on it's last legs.
Click to expand...
Click to collapse
If they made these things more reliable, they'd never have a means to convince you to buy another device .
well a usb port repair is totally possible with just an soldering iron, but you will need a fine tip for that and some flue that does not require cleaning. if any of the contact pad came off you better know where they go or find a way to trace where it goes. if they are broken and you find where they are connected you can use a copper wire taken out from copper brace to bridge them. lastly a broken usb port from the motherboard will never be secure again, so you have to put some padding under it so it will not be moved again; otherwise it will break and may take some contact pad with it in which makes it harder to repair again.
I fixed one of these before with only 1 broken pad that I can trace. so it is definitely possible to be done, but it will be very hard if this is your first time repairing phone. it is possible to rip the volume flex cable like I did. It took me 4 hours to solder flex by rewiring copper wires.
By the way hd2 usb port is only 7$ from eBay.
P.S the good thing about fixing phone is that, I got it from eBay, fix up, and working at $120 XD
Phone going crash
I don't know what happen recently with my phone. It just starting crashing on normal activities. I thought it was probably just the rom, but I flashed HyperDroid GBX v12, clk version and damn....i can't even get pass the boot animation. After a while I did...and then I connected my USB to my computer. Within seconds, phone crashed. I need help. I've task29 this kid like 4 times and then installed clk again.
Sometimes it is just the usb cable quality causing a bad connection... I had this Chinese micro usb data cable and it would only work at a "just right" angle, until I went to Radioshack to buy a 27 $ gold plated usb cable lol
Now everything works good and saved me from having to replace the microusb port on the phone.
Woow I thought I was the only one! I feel all your pains man..
First things first, those of you whose USB is still working, get clockwork mod set up before the USB dies.. at least with a card reader you could still flash thru zips.. I got an external charger and an extra battery as well, now I feel like my hd2 was sorta reborn! Haha..
Dunno bout you guys but I'm starting to feel that our beloved hd2 is slowly being abandoned really sad thing.. and I blame the hardware problems for this trend..
Phugz said:
Dunno bout you guys but I'm starting to feel that our beloved hd2 is slowly being abandoned really sad thing.. and I blame the hardware problems for this trend..
Click to expand...
Click to collapse
Nah, it's just nearing the end of its life cycle. There are better phones coming out now with faster processors and more resources to run bigger software and flashier graphics.
The HD2 has actually stayed on the top of the hill for a surprisingly long time, and in some ways still is.
The biggest difference with the HD2 compared to other phased-out smartphones, I think, is that the HD2 is still very useable even though it is well beyond its originally intended amount of time in the limelight.
I notice this whenever I dig out one of my old devices that I haven't used in a long time, like my Kaiser or Rhodium. They are so slow and basic that they're almost unuseable, where the HD2 is fast, smooth, and seems modern still.
But the mUSB port on these things is ****. Mine's been half-busted for almost a year. I have a wall charger and extra battery, and if I hold the cable just right, I can usually get a connection to the computer, but it's just easier to pop my sd card in one of my old devices to connect to pc and transfer files. The mini-USB ports never gave me near as much trouble as the micro ones, I wish they'd have never switched.
huggs said:
Nah, it's just nearing the end of its life cycle. There are better phones coming out now with faster processors and more resources to run bigger software and flashier graphics.
Click to expand...
Click to collapse
Hi all,
Just thought I'd let you know how I fixed my HD2's loose / non-functioning microUSB port.
I've had similar problems for the last 6 months or so - dodgy microUSB connection resulting in massive amount of fiddling in terms of getting the cable just right, then pretty much completely screwed!
I took receipt of a HTC Sensation a few weeks ago, so decided to spend a little while opening up my now redundant HD2. Dissasembly is pretty easy & self-explanitory, but the leaked videos showing you how to do it is pretty useful. I'm no whizz at these things, but even I managed to do it (mostly) with just a kitchen knife (forgot where I'd put my small screwdrivers, which I eventually found, but everything seemed more dangerous & exciting with the knife).
ANYWAY, I've managed to secure a completely loose microUSB port which means perfect charging & USB connection again. It was incredibly loose & just fell out when I separated the mainboard from the chassis, but I put a bit of rubber I found under it (soldering iron is for pros... I'm winging it here!) & secured the mainboard tightly with screws.
I mean, there's probably a better way to do it, but I couldn't be arsed using any more ingenuity than required... it's a Bank Holiday after all, and the solution seems to have worked pretty damn well.
Cheers,
Dan.
Hi, I can only charge my HTC HD2 phone using the USB port, but I cannot use the usb port for activeSync and USB function (data transfering). I wonder if the USB posrt is dead already?? Why the phone still can be charged via the USB port? Can anyone tell me how to fix this?
Thanks in advance.
mantis123 said:
Hi, I can only charge my HTC HD2 phone using the USB port, but I cannot use the usb port for activeSync and USB function (data transfering). I wonder if the USB posrt is dead already?? Why the phone still can be charged via the USB port? Can anyone tell me how to fix this?
Thanks in advance.
Click to expand...
Click to collapse
I had the same problem last week. My pc couldn't recognize it, but i was able to charge it.. I just took an other usb cable and the problem was solved.
My USB chord and charger wont work with my vibrant. It turns on and everything when placing a charged battery in it but it wont charge it. My USB port is really really loose and I need to know how to make it tighter.
Additional information: I'm 100% sure it isn't the rom or the charger I'm using. The problem is the USB port.
dcaples002 said:
My USB chord and charger wont work with my vibrant. It turns on and everything when placing a charged battery in it but it wont charge it. My USB port is really really loose and I need to know how to make it tighter.
Additional information: I'm 100% sure it isn't the rom or the charger I'm using. The problem is the USB port.
Click to expand...
Click to collapse
I had a issue like this, it was the cord I went to a local computer store and got another cord for 5 bucks that was longer and it doesn't wiggle at all. My sammy cord really only lasted about a month then it cracked at the mini hdmi part and was loose.
Sent from my SGH-T959 using XDA Premium App
If you mean the port on the phone being loose i had this happen on a Blackberry and I ended up doing a insurance claim and getting a replacement. Now of you still inside one year since purchase call up T-Mo and they should replace it.
Sent from my CM7 Powered Vibrant
archie53 said:
If you mean the port on the phone being loose i had this happen on a Blackberry and I ended up doing a insurance claim and getting a replacement. Now of you still inside one year since purchase call up T-Mo and they should replace it.
Sent from my CM7 Powered Vibrant
Click to expand...
Click to collapse
Well the problem with this is I've installed an FFC and had to scrape the paint out of the inside of the phone. You can clearly see the hole and I don't know how to cover it back up.
dcaples002 said:
Well the problem with this is I've installed an FFC and had to scrape the paint out of the inside of the phone. You can clearly see the hole and I don't know how to cover it back up.
Click to expand...
Click to collapse
Do you know how to solder?
No but I'm a quick learner... Besides, how hard could it be?
Yup. Left phone on charger overnight - woke up and the camera was flashing every 2 seconds. That's all it will do. Whether it's hooked up, unhooked. As long as the battery's in that's what it does. No rom changes in over 2 weeks. No damage of any sort.... no recovery or anything
Well you can probably do a warranty exchange.
I voided my warranty and your mum.
I had something similar with my nexus one. Except it wasnt the camera but the trackball... changing kernels around seem to help a bit but eventually i took it for water damage. Take the battery out and let it dry off for a day or two. You can also try to pry it open and have your hand at any corrosion if you find any. However i wouldnt recommend that unless you know what yer doing.
Sent from my MB860 using XDA App
guybanda said:
I had something similar with my nexus one. Except it wasnt the camera but the trackball... changing kernels around seem to help a bit but eventually i took it for water damage. Take the battery out and let it dry off for a day or two. You can also try to pry it open and have your hand at any corrosion if you find any. However i wouldnt recommend that unless you know what yer doing.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
He said it was left on the charger, not fell in water.
I'd crap my pants if this happened to me.
CM7 Drugged
ac7brier said:
He said it was left on the charger, not fell in water.
I'd crap my pants if this happened to me.
CM7 Drugged
Click to expand...
Click to collapse
I realize that but like i said i had the same experience and my phone didnt get noticably wet at any time could have been a single drop of water and corrosion takes a while to build up.
Still...
Im wondering if you used your original charger when this happend because i can personally say ive seen my atrix behaving strange when connected to some cheap random charger (touch screen not working for example). Didnt believe it could cause permenant damage though.
Sent from my MB860 using XDA App
guybanda said:
I realize that but like i said i had the same experience and my phone didnt get noticably wet at any time could have been a single drop of water and corrosion takes a while to build up.
Still...
Im wondering if you used your original charger when this happend because i can personally say ive seen my atrix behaving strange when connected to some cheap random charger (touch screen not working for example). Didnt believe it could cause permenant damage though.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
It was hooked up with a Blackberry charger, actually.
Still acts the same.
Check the charger to see if its power ratings are different than your otiginal one.
Also... does the device boot up in any way or is the screen simply black and the flash flickering no matter what?
Sent from my MB860 using XDA App
guybanda said:
Check the charger to see if its power ratings are different than your otiginal one.
Also... does the device boot up in any way or is the screen simply black and the flash flickering no matter what?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Looking at it today, I noticed that the charger port (or inlet if you will) is very structurally loose. The voltage on the blackberry charger is about 3/5 that of the stock Atrix charger, if memory serves me - somebody at work switched out the chargers the day after I got the phone. It took a good 6 hours to charge...
ATT said that it would be full cost of phone, because it's personal damage.
I'm looking into the Mi-One.
EDIT: No, the screen will not even begin to come on. Camera flashing is the only indicator of any power. Used an external battery charger, and two different batteries.
The MI-One looks sweet!!!!
smoothtaste said:
Looking at it today, I noticed that the charger port (or inlet if you will) is very structurally loose. The voltage on the blackberry charger is about 3/5 that of the stock Atrix charger, if memory serves me - somebody at work switched out the chargers the day after I got the phone. It took a good 6 hours to charge...
ATT said that it would be full cost of phone, because it's personal damage.
I'm looking into the Mi-One.
EDIT: No, the screen will not even begin to come on. Camera flashing is the only indicator of any power. Used an external battery charger, and two different batteries.
Click to expand...
Click to collapse
Moto will probably either fix it or send you another phone. I know people who bricked from trying to downgrade and they got another phone. I'm sure you could too. I would try that before you buy another phone.
ETA: Now that I think about it not being able to put the rom back to stock would probably be an issue if they can get it to turn on but if they can't they might replace it.
smoothtaste said:
Looking at it today, I noticed that the charger port (or inlet if you will) is very structurally loose. The voltage on the blackberry charger is about 3/5 that of the stock Atrix charger, if memory serves me - somebody at work switched out the chargers the day after I got the phone. It took a good 6 hours to charge...
ATT said that it would be full cost of phone, because it's personal damage.
I'm looking into the Mi-One.
EDIT: No, the screen will not even begin to come on. Camera flashing is the only indicator of any power. Used an external battery charger, and two different batteries.
Click to expand...
Click to collapse
I also think you should bring it up with motorola. Waking up to find your phone bricked is hardly what id call personal damage. You also shouldn't bring up the charger issue. And as for the usb port i'd say it would take too much effort to discern the connection with that and the phone acting as it is, and im sure they would rather just send a replacement unit.
A usb port malfunctioning is hardly an account for personal damage. The usual case is they simply stop working, but definitely not brick your entire phone.
Sent from my MB860 using XDA App
Well sadly my beloved HD2 decided not to turn on yesterday and Im hoping someone has the answer to fixing it.
I have an ICS android rom installed onto it with CWM Recovery so I should be able to charge while the phone is not on but I am not getting a charging light at all, I have tried multiple usb leads and even a out of phone battery charger which says the battery is fully charged but when I turn it on all I get is a slight vibrate and then nothing. I have also tried bending the pins to make sure they are connecting with the battery.
Any Ideas? Thanks
Maximillion195 said:
I have an ICS android rom installed onto it with CWM Recovery so I should be able to charge while the phone is not on
Click to expand...
Click to collapse
i suspect you are confusing CWM and cLK. cLK can charge when off, magldr can't. Its nothing to do with CWM.
Assuming you have magldr, and don't have an external charger / spare hd2 / spare battery to test with, if you have a spare usb cable (mini, micro, doesn't matter, any old usb lead) cut end off, (mini end, lol) bare red and black and hold them against + and - on the battery for a minute or so. Fingers are fine, you wont get a shock. Don't touch the center plate on the battery, just the + and - outer pads.
If that doesn't work then its not the battery.
Yes sorry I did mean cLK, I have already used an external charger with the battery and I should be getting a spare tomorrow just to double check it is not the battery and I guess this method is just to charge the battery?
If it is not the battery do you have any idea what else it could be? again the only sign of life in the phone is the small vibration I get if I take out the battery and put it back in and press the on button.
Well I just got the spare battery but nothing new still get the tiny vibrate and the phone does not turn on
Possibility that the lcd went out on you... worst case scenarios is you having to buy a new used phone and selling your current one as parts not work. Hopefully by selling your broken phone... you will get some money to cover for the new used phone
Sent from my LG-P999 using xda premium
Surely if the lcd went the phone would still turn on?
Nahh although I love the HD2 it is time for an upgrade probably gonna wait for the HTC One X.
Looks like im stuck with this lame 2g iPhone for now then
Maximillion195 said:
Surely if the lcd went the phone would still turn on?
Nahh although I love the HD2 it is time for an upgrade probably gonna wait for the HTC One X.
Looks like im stuck with this lame 2g iPhone for now then
Click to expand...
Click to collapse
Yes its possible.... I had it happened to my hd2... but to make sure I searched and found that it is possible that the LCD went bad and still you can see that it power on. .. but because you cant see where your phone loads up. .. it could be bootlooping. .. but if it power up all the way. .. called it. .. see if it rings
Sent from my LG-P999 using xda premium
T-Mobile is sending me a new one arriving monday 4/28/14 and i have 7 days from receipt of the replacement to return this handset but i NEED TO RECOVER IMAGES AND TEXTS! i'll do anything that wouldn't indicate to t-mo that i've screwed the warranty pooch please halp
took it to a little shop and a guy said it was electrostatic in the mobo. i got the phone powered on and everything but it went off as soon as i got home i dont wanna pay him more ughhhhh
you guys are useless sometimes but here's a hint so you never have my problem. don't use usb extension cable to charge your phone. just use the one that came with it. pull that chair hecka close to the wall. random usb cables can screw up your hardware
RiverdALIEN said:
you guys are useless sometimes but here's a hint so you never have my problem. don't use usb extension cable to charge your phone. just use the one that came with it. pull that chair hecka close to the wall. random usb cables can screw up your hardware
Click to expand...
Click to collapse
Maybe no one before you got this problem, so no one could help you with it?
Comments like these are downright rude and definitely won't get you any help when needed.
RiverdALIEN said:
you guys are useless sometimes but here's a hint so you never have my problem. don't use usb extension cable to charge your phone. just use the one that came with it. pull that chair hecka close to the wall. random usb cables can screw up your hardware
Click to expand...
Click to collapse
Lol. Noob.
Posting from my LG G2 while driving an Evo IX.
RiverdALIEN said:
you guys are useless sometimes but here's a hint so you never have my problem. don't use usb extension cable to charge your phone. just use the one that came with it. pull that chair hecka close to the wall. random usb cables can screw up your hardware
Click to expand...
Click to collapse
On a related note, I am using a USB extension cable with another USB cable, my phone is fine. Anyways as was stated don't be rude, you posted a question that maybe 0.1% of people with a G2 have had.
Sent from my LG-LS980 using xda app-developers app
yeah whatever guys don't be so sensitive. i'm definitely not a noob. i know when i've been looked off.
i'm not saying they cause the problem i'm saying they can.
anyway, someone can close this thread.