Overclocking the Treo Pro is possible!! - Palm Treo Pro

Ok, Before I start, I'd just like to note that this is my very first Thread on XDA, so if this is the "wrong section" and what not, sorry.
Now, If somebody has already figured this out and has a source, please direct me towards it, because I simply couldn't find it, Googling for my life! But I actually figured out a way myself and thought I'd share it in case this is still unheard of.
It's quite simple really, from my research on the CPUs that are in these HTC Devices, I figured MSM7kCpuSpeed should do it, but whenever I adjusted the clock in there, the phone froze, even under clocking froze the phone, then after toying around with other clocking programs, I discovered the phone apparently does some kind of auto CPU Scaling CONSTANTLY, so I looked for a way to disable this, and found Pocket Hack Master. and to my surprise, it worked! MSM7kCpuSpeed no longer froze the phone with the Auto Scaling disabled!
So here's how to in short:
1. Download and install Pocket Hack Master, and under File > Edit > Settings > Advanced. Tick "Disable Device Built-in Scaling" then tap "Ok" and then "Minimize" Make sure Pocket Hack Master DOES NOT CLOSE! Keep it open and MINIMIZED.
2. Download and install MSM7kCpuSpeed, Overclock and enjoy!
I've only gotten my Treo Pro up to about 730mhz without any crashing. but this actually works! I haven't tested with some kind of Benchmark, but I tested with many different emulators, and they are indeed much faster!
And that's it! Enjoy!

Hi there, I tried your overclocking solution but I got a problem, when I try to run MSM7kCpuSpeed I get an error message and the application does not open. I have Pocket Hack Master running with the mentioned setting activated.
Any ideas? I installed MSM7CpuSpeed v2. Looks like the device is not supported from what I have read in the MSM7CpuSpeed thread. I have the unlocked GSM Treo Pro. Perhaps you are running the CDMA device?
Would love to overclock my Treo Pro.

Yea, I do have the CDMA version, but I don't see why that would make the program not work... Unless the GSM Version really has a different CPU? and not just clocked at a different level.
Maybe you need Compact Framwork 3.5 or higher? I dont know if its needed to run MSM7kCpuSpeed, but give that a check.

Both the CDMA and GSM versions of the Treo Pro have the Qualcomm MSM7201 chipset. The difference is the clock speed; the CDMA runs at 528MHz, while the GSM runs at 400MHz.

Thanks for the info.... hummm, I just checked and my TP has CF 3.5 installed. Maybe it has to do with my ROM. I am using Mordaz 6.5 21884 in Spanish. Are you in 6.5 or maybe 6.1? Perhaps the language?

guilledil said:
Thanks for the info.... hummm, I just checked and my TP has CF 3.5 installed. Maybe it has to do with my ROM. I am using Mordaz 6.5 21884 in Spanish. Are you in 6.5 or maybe 6.1? Perhaps the language?
Click to expand...
Click to collapse
I'm using a 6.1 - 21057 rom from RaiderFan, English.
Well, I really don't know what to tell you. this really does work... for me at least...
... Hmmm, I don't know if this could have something to do with it, but I am using RealVGA at 96 DPI.

I'm using the same rom but in Dutch. Anyways I also get the same failure report.
Well I'm going to instal another rom today, so I will let you know if that is a game changer.
edit: Tried with the 21903 and 28.... (both 6.5) but still nothing and the same error.
xXHawkeyeXx can you maybe post the details about which pocket hack master and MSM7kCpuSpeed you used for overclocking?
I do got a question regarding the battery. It seems that the apps are really draining my battery, do you also notice that or is it just me?

ruben__ said:
xXHawkeyeXx can you maybe post the details about which pocket hack master and MSM7kCpuSpeed you used for overclocking?
I do got a question regarding the battery. It seems that the apps are really draining my battery, do you also notice that or is it just me?
Click to expand...
Click to collapse
Im using PHM (Pocket Hack Master) Version 4.36.062, Msm7kCpuSpeed Version 2.
As for battery, I've been able to keep my Treo Pro steady at 768mhz, and theres only a very small decrease in battery life.
Hmmmm.... You know, I had discovered 2 different ways to overclock the Treo Pro, I didn't even bother mentioning the other method, because its a bit tricky and requires you to be fast, but it seems more reliable, however it only has 1 clock choice and thats 768mhz.
well, here it is: You need to download NueOverclockTest (Google NueOverclockTest, wont let me post links)
After you install it, theres 2 ways to do this, if your lucky, you can just open PHM to stop the CPU scaling, then just go ahead and use NueOverclockTest to overclock to 768 Mhz. However for me, after I did that a few times, it didn't seem to work anymore untill i started doing it the tricky way, witch goes like this.
First, you have to have PHM CLOSED, then you gotta have a way to open PHM real fast, either by setting one of your keys to open it, or whatever, next what you do is this, open up NueOverclockTest and click "ok" twice till it gets to the "Your current clock speed is xxx.xx Mhz, set clock speed to 768.00 Mhz?", when it gets to that menu, sit and wait for about 10 seconds, whats happening at this point is your Treo Pro's CPU is scaling a bit for whatever reason, and by waiting 10 seconds, it should scale to 400Mhz and sit there, if you click "Ok" while it isn't scaled to 400mhz, the phone will just freeze, now, IMMEDIATELY after you click "ok", open PHM as fast as possible, otherwise before it can open and stop the scaling, your phone will just reset back down to 400mhz...
there is 1 problem though, these instructions are for my Treo Pro witch is clocked at 528, as you already know.... I don't know if its the big jump in CPU clock that freezes the phone, but if is, jumping from 400 to 768 might still be too big of a jump and will just freeze....
now, if it does work for you, the way I check to make sure I did it fast enough, is to use Nue Clock Control to see if it says "768mhz". I also use Nue Clock Control to clock my phone back down, Because closing PHM and letting it scale back down automatically only froze my phone. Letting my phone go to sleep also freezes it.
Well, thats it! Good luck!

xXHawkeyeXx, thank you so much for the tutorial!
But it is probably the device itself. None of the hacks worked for the GSM version, I even downgraded to wm 6.1 but nothing.
Still happy with 6.1 though =)

ruben__ said:
xXHawkeyeXx, thank you so much for the tutorial!
But it is probably the device itself. None of the hacks worked for the GSM version, I even downgraded to wm 6.1 but nothing.
Still happy with 6.1 though =)
Click to expand...
Click to collapse
Awww, but we can't just give up there...
Its been confirmed that both devices use the same exact CPU, just clocked to a different default level. The oddest thing is, there's no reason Msm7kCpuSpeed shouldn't be starting up, I'm about ready to hard reset my phone and starting clean to see what exactly it was I did without noticing to get Msm7kCpuSpeed to start...
It would be a darn shame, I love the Treo Pro, and want other fellow Treo Pro owners to experience the joy of overclocking.
Yea, 6.1 does seem to run better IMO.
...well, if I can convince my self to try a hard reset, I'll let it be known, just that it would be a lot of work setting my phone up again.

Hi guys, I have not been able to try another ROM yet, I will give it a try in the weekend.
Ruben__ about the ROMS you tried, were they in english? Sometimes developers create their apps in english and do not support another languages...
Edit: looks like a couple of posts in the MSM7K... thread point to the Treo Pro.
http://forum.xda-developers.com/showthread.php?p=7831318&highlight=7201#post7831318
http://forum.xda-developers.com/showthread.php?p=9393170&highlight=7201#post9393170

guilledil said:
Hi guys, I have not been able to try another ROM yet, I will give it a try in the weekend.
Ruben__ about the ROMS you tried, were they in english? Sometimes developers create their apps in english and do not support another languages...
Edit: looks like a couple of posts in the MSM7K... thread point to the Treo Pro.
http://forum.xda-developers.com/showthread.php?p=7831318&highlight=7201#post7831318
http://forum.xda-developers.com/showthread.php?p=9393170&highlight=7201#post9393170
Click to expand...
Click to collapse
Yeah, but it looks like the guy in that first post has his info a bit backwards... The CDMA Treo Pro isn't the one with the 400 Mhz clock.
At any rate, looking forward to hear how that trying a different ROM goes. Perhaps it was that all along since you both weren't using English ROMs.

I'll be trying this on my unlocked GSM Treo Pro, with stock English ROM build 19216.1.0.5, this weekend and report back my findings.

Just tried with 6.5 21884 Mord4z ROM in english (GSM unlocked Treo Pro) but unfortunately the same error message when opening MSM7... maybe other ROMS might work. I hope someone else has better luck than me!

xXHawkeyeXx said:
Awww, but we can't just give up there...
Its been confirmed that both devices use the same exact CPU, just clocked to a different default level. The oddest thing is, there's no reason Msm7kCpuSpeed shouldn't be starting up, I'm about ready to hard reset my phone and starting clean to see what exactly it was I did without noticing to get Msm7kCpuSpeed to start...
It would be a darn shame, I love the Treo Pro, and want other fellow Treo Pro owners to experience the joy of overclocking.
Yea, 6.1 does seem to run better IMO.
...well, if I can convince my self to try a hard reset, I'll let it be known, just that it would be a lot of work setting my phone up again.
Click to expand...
Click to collapse
That is some real Palm Treo Bro-ttitude!
But seriously don't! It is a pain to set things up again.
@ guilledil
I have tried different roms and nothing worked for me but I did find a program which is not that great but it does something. It's called 'speedbooster' and it doesn't really 'overclock' the phone but let you prioritize the cpu for program's. It will also let you improve the video speed but it's not that noticeable and it really drains my battery.
I think we gsm'ers are stuck @ 400 mhz

MSM failed to run on my stock unlocked GSM Treo Pro. It complained about the Compact Framework being too old on my device.

@hockeyfan: I think stock GSM does not have CF installed by default. In Mord4z 6.5 21884 ROM it comes installed. You could try installing CF 3.5 but it is not working for me in wm6.5.
@ruben__: I have been using Speedbooster for quite some time now and it does what it says... it is not overclocking but it is something. Guess other Treo Pro owners could try it. Well, we tried it but as you said, we GSM'ers only get 400 mhz!!

there's no way to overclock treo pro.i've tried many ways,but all lose.

Related

Turbo Modus found on Pro/VPA4 !!!

Hi !
All the times i´m sure, that the same Turbo-Modus from WM 2003SE exist deep in the WM5 too.
People call me, Jay, you are crazy!
Since one Week ago i find the Turbo-Modus !
We tested it on the German-Forum http://www.ppc-welt.info/community/showthread.php?t=81949
It´s the same Speed-Up Feeling like on the XDAIIi or other Devices with the Turbo-Modus On.
No 50% or 1000%- Booster, but you can feel a better "Easy-Going".
It works on some other WM5-Devices too !
First, you only take a "new" Key to the Registry, copy the Power-Programm from WM2003 SE, start the Power-Programm,
go on new Processor-page and:
The Turbo-Modus exist and can be activated !
Here is the key:
HKEY_Local_Machine\ SOFTWARE\HTC\Power
Put a D-String with Name "ProcessorPageFlag" 1 Dec.
I made a reg.-File who write the key, and i put it with all needed files in one .zip-File.
Password: Agent Jay
First try the reg.-File, than copie the Files, if you want, you can overwrite the files in the Windows-Directory, but backup the originals !
Put the power.lnk File in the autostart/startup Directory, and now, after every Softreset, you can activ the Turbo-Mode.
It works perfectly, you can only feel the Speed-Up on really full Memory Pro´s, not really on empty Pro´s. Don´t know why.
Problems: After a Softreset it goes on "Standard-Mode", it must be activated again manual by Hand.
But these five Seconds for restaring Turbo-Modus during a startup are OK for me.
Anyone can it handle or find a way, to save the turbo-modus forever ?
I hope you like it !
Greetings from Germany,
Agent Jay
???
Is it workin or just eating up my alredy bad battery? :/
RE
I just installed yesterday on my QTEK9000 and I 'think' its smoother in operation.
Not very sure about it
As I''m running XCPUScalar and some other speed up registry tweaks if there's any speed increase its definitely not noticeable
Thanks
It´s not possible to detect the faster speed, because it don´t push up the megaherz-rate !
But you can feel the faster performance.
No more power using from your battery !
So it speeds it up without speeding up the processor or using any more battery power? Hmmm. Surely if that were possible then the "Turbo" mode would be the default mode and no other mode (like "slowmo" mode) would exist?! :wink:
Could it be that the Turbo page is something that is built in to WM5 but which was disabled on the Universal since it does not support it?
Seems to work on my Magician
Can anyone pinpoint the actual benefit of this tool?
Exactly what difference is experienced??
The benefits are a faster and a feeling of "liquid" working.
Thats it.
Menus open faster, Windows open faster, the handling is therefore better.
No longer hickups, ...
It´s like Aspirin for a guy with headache.
After the Aspirin he don´t run faster, but he have no longer headache :wink: and make a better work.
I think, every little speed up of our device- help us !
Try it or leave it.
Regards,
Jay
It really wont make a difference on the HTC Universal because it already has a 520 MHz processor. With the PDA2, the processor was underclocked to 416 Mhz and the power-up option was useful there.
UD.
Thats not correct. It works on the Universal too !
First users here and some more users on german forum had tested and feel
more Speed. You can´t test it with benchmark-apps, because you don´t speed up the processor. Don´t know exactly, what it is, but it works.
Test it yourself and than reply !
Greetings,
Jay
Alright Jay, will keep you updated
Cheers.
Uhm... it *seems* to do something to the general responsiveness of the Universal, the hourglass appears for less time now.
I'll keep testing it... thanks for the clue.
Are you sure with this password. It is not working to unzip it !!!!!!!!!
CAB for your Turbo
i made cab files for this. easy installation.
i think this can make it easy!
thanks! AgentJ!
Re: CAB for your Turbo
Asukal said:
i made cab files for this. easy installation.
Click to expand...
Click to collapse
Thank you MR.Asukal!!
Gooooooooood Job!!!
Re: CAB for your Turbo
siam_breeze said:
Asukal said:
i made cab files for this. easy installation.
Click to expand...
Click to collapse
Thank you MR.Asukal!!
Gooooooooood Job!!!
Click to expand...
Click to collapse
not thanks to me but to AgentJ, i had just assembled his mirachle!
Camrade Siam_breesze!, you must use Japanese Flag on your prifle,
not any others! or you wll be missed AIKOKU_set in future! :lol:
Does it really work?
Melty said:
So it speeds it up without speeding up the processor or using any more battery power? Hmmm. Surely if that were possible then the "Turbo" mode would be the default mode and no other mode (like "slowmo" mode) would exist?! :wink:
Could it be that the Turbo page is something that is built in to WM5 but which was disabled on the Universal since it does not support it?
Click to expand...
Click to collapse
when i modefied Power.exe in Jasjar to mui,
i have found this entry in that resources.
are there any way to visuable those entry in the Power.exe???
[in the String Table 260]
4144, "Speed"
4145, "Auto (400MHz)"
4146, "100MHz Run mode"
4147, "200MHz Run mode"
4148, "400MHz Run mode"
4149, "100MHz Turbo mode"
4150, "200MHz Turbo mode"
4151, "300MHz Turbo mode"
4152, "400MHz Turbo mode"
4153, "Change <file:ctlpnl myCpl,5{beam}> settings to conserve power."
4154, "Backpack"
4155, "Backpack battery:"
4156, "Over Heat"
4157, "Battery Bad"
4158, "Unknown"
When VGA was used in full scale, a set screen where this processor was changed to the turbo mode was not displayed.
It seems to be able to use it only for QVGA.
I am using OzVGA.

Overclock my Elf

Hi guys,
I wanted to overclock my Elf, but I don't found an usefull tool. I've tested HomePlus (aka Battery Status), but there is no config - and I don't need any HomePlus (I used Onyx with M2D ;-)).
Is there an other good tool to overclock?
Have fun,
MCXSC
HOme plus for OMAP; There are config, tap Advanced..
Use Second Today Screen for have Manilla and Overclock on same time.
kedal said:
HOme plus for OMAP; There are config, tap Advanced..
Click to expand...
Click to collapse
I tapped "Options" but no dialog appears.
kedal said:
Use Second Today Screen for have Manilla and Overclock on same time.
Click to expand...
Click to collapse
I wanted to avoid the second today screen...^^
http://www.freewarepocketpc.net/ppc-download-omapclock-v2-0.html have you tried this one? And use http://www.freewarepocketpc.net/ppc-download-omapclockplus-v0-0-4-omapclock-helper.html with it.
I would recommend you to forget this! The elf is not good for overclocking!
sercio said:
I would recommend you to forget this! The elf is not good for overclocking!
Click to expand...
Click to collapse
Why is that ?
I am overlocking my Elf to 286 Mhz for more than a year without any problems
I am using BatteryStatus
I cant even Overclock my Elf at 221Mhz without getting serious problems!
There are people around saying they can OC more 312mhz but i dont believe them!
I use HomePlus and my Elf is clocked at 312Mhz without problems.
Search the HomePlus at www.softpedia.com
touch here too, and oc to 286 no problems yet. i'm using batterystatus/homescreen++
After many attempts I can only overclock my Touch to 234Mhz without encountering any lockups. Good job to the rest of you, getting the better CPU's off the assembly line.
To all people having problems OC'ing, try a higher speed. My elfin crashed when I OC'd to 247. Now I've set it to 273, and it works fine. Weird. I've also turned off CPUScaler because it goes to 247 and some unstable frequencies sometimes.
It runs GREAT. Rock-solid, and beautifully smooth.
Edit: Stress-tested successfully by running a TCPMP benchmark on a full-length movie, leaving it two inches behind my laptop vent. I call it the 'Tropical stresstest'.
htedum or anyone else overclocking past 250Mhz, I'm wondering doesn't it take a toll on battery life. I tend to read lots of books on my Touch and with the scaler on it throttles down to 143Mhz during page reading, and I find that helps keep the battery fresh since it not clocked high constantly.
How dramatically does the battery life get influenced with the Touch clocked so high?
I think I don't have any problem with overclocking the Touch (BatteryStatus) when working on battery (it only crashes occasionally), but the Touch turns it self off completely or hangs quite often when I connect it to the PC. So in order to avoid the crash, I always have to remember to turn off the overclocking mode before plug it in my PC, which I usually don't, and then it crashed
Did anyone experience the same problem ? I'm about to give up the overclocking thing, even though I'm not really satisfied with the performance of the Touch.
I have my Touch overclocked to 624Mhz, and I have no problems at all. However my battery gets eatin up pretty fast at times. I found this file over at www.smartphonejunkie.com. Good stuff
Safe overclocking speed.
Can anyone please help me in letting me know the safe overclocking speed for Elf.
Or is it that we have to just try new nos and check?
Sarge1721 said:
I have my Touch overclocked to 624Mhz, and I have no problems at all. However my battery gets eatin up pretty fast at times. I found this file over at www.smartphonejunkie.com. Good stuff
Click to expand...
Click to collapse
a touch (elf) that overclocks from 201MHz to 624MHz is just plain BS!
max has always been 312MHz and not for everyone.
safe option is 234 or 247MHz.
I personally underclock at 87MHz and scale up to 260MHz when using GPS.
What about using OmapClock 0.2? I've been using this software quite a long time.. It did not giving me any problem. Normally,i'll clocked it to 260mhz. Stable and fast.. But this software has a bug is that the clock will gone once you switch your phone to sleep mode. When you turn it back on, it will go back to 201mhz. I've settle the problem by bundle with Memmaid software. Puting a shortcut in to memmaid's notification queue and it will continue to clock at 260mhz when the phone wake up. First, you have to create a shortcut by using notepad and wrote :
40#"\Program Files\OmapClock\OmapClock.exe" -clock 260
Save it to exactly "OmapClock.lnk" then put it into My Device/Windows/start menu, next using memmaid add a new entry to the notification queue pointing to the above shortcut and with the argument "AppRunAfterWakeUp". This makes the app run and set the higher freq everytime you switch back on your phone.
Will the phone still running at 260mhz when it sleeping? NO, don't ask this question again.
Cheer, MD.
mysterious_driver said:
What about using OmapClock 0.2? I've been using this software quite a long time.. It did not giving me any problem. Normally,i'll clocked it to 260mhz. Stable and fast.. But this software has a bug is that the clock will gone once you switch your phone to sleep mode. When you turn it back on, it will go back to 201mhz. I've settle the problem by bundle with Memmaid software. Puting a shortcut in to memmaid's notification queue and it will continue to clock at 260mhz when the phone wake up. First, you have to create a shortcut by using notepad and wrote :
40#"\Program Files\OmapClock\OmapClock.exe" -clock 260
Save it to exactly "OmapClock.lnk" then put it into My Device/Windows/start menu, next using memmaid add a new entry to the notification queue pointing to the above shortcut and with the argument "AppRunAfterWakeUp". This makes the app run and set the higher freq everytime you switch back on your phone.
Will the phone still running at 260mhz when it sleeping? NO, don't ask this question again.
Cheer, MD.
Click to expand...
Click to collapse
Try OmapClockPlus. It's OmapClock extension which fixes your problem.

WM 6.1 problem - Slowdown after gameplay

I have an Alltel HTC Touch, and I have a problem with WM 6.1; everytime I close out a game, it slows down my entire phone (and sometimes freezes it if I load an app like Opera Mobile). I've been to PPCGeeks about this, and they helped me a lot, by helping me overclock the processor. My phone doesn't slow down too much anymore, but the slowdown is noticeable enough to still be a problem.
I've flashed to at least six different WM6.1 roms now, and each of them gave me the same issue.
Does anyone have any fixes for this? I would really appreciate the help!!
SIDE NOTE:
Also, my camera is very laggy indoors. It ran perfectly smooth before my transition to 6.1, and it remains laggy when I flash back to the stock WM 6.0. Its bearable right now, but if anyone knows how to get it running smoothly indoors again, I'd really appreciate it!
For starters, this is not an issue with the OS.
What game is it?
How many other apps are running?
How many processes are running?
What ROM are you using?
What is the Page Pool size?
Thanks for the quick reply!
Uh oh... that means the problem lies with my phone. I hope it's a problem that can be fixed...
Do you know if there's anything I can do to fix this then?
Oxymoron said:
Thanks for the quick reply!
Uh oh... that means the problem lies with my phone. I hope it's a problem that can be fixed...
Do you know if there's anything I can do to fix this then?
Click to expand...
Click to collapse
LOL!
I'm trying to help you, but I can't until you answer some of the questions.
It's like calling a mechanic and asking what's wrong with your car, it runs a bit odd, but that's all the info given.
Sorry about the double post. My info's below.
Maybe a little more information will help.
My phone first started doing this when I flashed to the new Alltel WM 6.1 rom. I followed the instructions, doing EXACTLY what the tutorial (from HTC's website) told me to. After the flash everything worked fine except for my camera and the games (slowdown issue).
I hope this helps.
WOW, I am SO sorry, I didn't even see those questions! I thought they were a part of your sig and didn't read it
1. It slows down with any game I run except for the ones that come with the rom (solitaire and bubble breaker). The games I've tried are:
Acky's XP Breakout
4pinball
Anything on Pocketnester
Snails Reloaded
Turbo Invaders
Shift
Realms
More...
2. No other processes are running. The game is the only one.
3. The roms that I've used are (all of these are for Alltel):
Conflipper's Vouge 6.1 ROM
Crystal v.4 6.1 ROM
Official 6.1 ROM
Dette M2D Diamond Edition v2.3 (Generic rom. This is the one I'm on currently).
4. How do I find the pagepool size again?
Again, sorry about that. I didn't see your questions
I officially give up!
Oxymoron said:
My phone first started doing this when I flashed to the new Alltel WM 6.1 rom. I followed the instructions, doing EXACTLY what the tutorial (from HTC's website) told me to. After the flash everything worked fine except for my camera and the games (slowdown issue).
Click to expand...
Click to collapse
You should have followed the cookers instructions, if you did not follow their instructions exactly, reflash by their way.
For the camera, it's sometimes laggy, especially with low memory.
Oxymoron said:
Acky's XP Breakout
4pinball
Anything on Pocketnester
Snails Reloaded
Turbo Invaders
Shift
Realms
More...
2. No other processes are running. The game is the only one.
Click to expand...
Click to collapse
I haven't even seen half of these games, but PocketNES can be buggy. I suggest using dotfred's Task Manager and viewing CPU usage after playing these games. One of them may have a memory leak causing this.
Also check the other running processes for memoery consumption.
Oxymoron said:
4. How do I find the pagepool size again?
Click to expand...
Click to collapse
Ususally the cooker posts this, but I see he didn't, the basics on this is it determines your available program memory at all times, especially on boot up, if you really want to know, soft reset, wait a min or two and check the avail program memory. Or use nue's system tool to view additional info.
Also, trying using Oxios Memory, it's free and will free up all avail program memory not being used.
You can try schap's Advanced Config Tool to speed up various parts of your device for improvement.
Alright, don't want to sound frustrated, but I just watched some Hell's Kitchen !
You are a genius! Thanks for the suggestions. I'm gonna try them now and see what happens, and I'll be back with my results!
And, no, you didn't sound frustrated, even though if you did, I couldn't blame you
Thanks again!
Okay, I'm back. Using the task manager you suggested, I found the problem.
The game that I tested (4Pinball) is still running after I closed it. It doesn't show up on the quick menu in the upper right corner of the today screen, but it DOES show up in that task manager.
So I go to close it, and it says it can't be closed properly, and it asks me if I want to kill it. The strange thing is, the choices are ok and cancel instead of yes and no. But anyway, I hit ok.
then another message pops up, but there's no text in it; there's just an X there. After I close that message by hitting ok, I see that 4Pinball remains in the task manager, and it's still there even after I hit refresh.
I installed it to the storage card. Would there be a better chance of it working if I install to device memory?
Sometimes I got the blank message to, don't worry about that, but you have to kill the process for it to work.
Try uninstalling it and running without it.
I keep getting the blank screen... I tried to install it on both the storage card and the device memory, but in either case it doesn't close the game. I'll keep tryin'.
Oh yeah, and I tried that oxios memory program, but it didn't work... it would start loading, but it would never come up.
I remember hearing about a program that freed up ram over at ppcgeeks's forum. I'm gonna see if I can track it down.

Essential fixes for the Xperia X1

Hi all!
I`m new to this excellent board, even though I`ve been lurking for years. Lots of really skilled people here, awesome.
Anyways, as I`m waiting for my new Xperia I wondered if someone could put together a list of "essential" xperia fixes/add-ons/software, i.e. stuff that should be done right out of the box sort to say?
Nothing I hate more than to use a toy like this for a few months only to then stumble across a fix for something I`ve annoyed myself half to death over.
If such a list already exists, please disregard this post.
N.B: I noticed the sticky list of fixes and tweaks above, just wondered which of these were essential for the basic functions/performance of the handset.
well basicly the X1 just works.
i found my original rom work realy stable but it was also kinda slow. tried some updates and fixes which work but none of them was essential.
flashed a new rom yesterday and i have to say .. wow its like 2 times faster now but also 4x more unstable and acts kinda strange from time to time.
so in short, nothing is needed, all can be done
achmed20 said:
well basicly the X1 just works.
i found my original rom work realy stable but it was also kinda slow. tried some updates and fixes which work but none of them was essential.
flashed a new rom yesterday and i have to say .. wow its like 2 times faster now but also 4x more unstable and acts kinda strange from time to time.
so in short, nothing is needed, all can be done
Click to expand...
Click to collapse
what rom did u flash to?
Thanks for reply!
But 2x faster, thats kindof a big deal, isn`t it? Especially given that the main letdown of the Xperia (based on the reviews I`ve read) is that it suffers of the typical WM6-lag?
Are there no official OS or ROM-updates from SE (planned or released) that handles these issues? I presume that there`s much potential to unlock just by optimalizing these things?
nawfalah said:
what rom did u flash to?
Click to expand...
Click to collapse
Touch-IT 2.1
but the Opera is pretty messed up plus it hangs from time to time with no reason (simple task closing seems to be enough)
gonna try 2.2 tonight but i dont have much faith
@Doderlei
non official ROM. just keep in mind that if u flash those none official ones u usualy break something else. it is faster indeed, panel switching doesnt have any lag for me now but i dont use panels anyway. also my vodfone internet connection acts strange. IE works fine but the Opera wont open any site unless i set a proxy. my (hard)keyboard is missing the space key when using putty and so on.
Well I don't tweak my device since I rather don't do these things, try to have my device as clean as possible, and those tweaks are always a bit dangerous - IMO...
But for me ESSENTIAL was to install FlashLite 3.1 and YouTube. That added a lot of functionality.
Also, as well as there are still some email sending problems (WM generally), I installed WM email hotfix, and also ProfiMail mail application.
Also immediatley upgraded Google Maps to 2.3 (original od device: 2.1).
achmed20 said:
well basicly the X1 just works.
i found my original rom work realy stable but it was also kinda slow. tried some updates and fixes which work but none of them was essential.
flashed a new rom yesterday and i have to say .. wow its like 2 times faster now but also 4x more unstable and acts kinda strange from time to time.
so in short, nothing is needed, all can be done
Click to expand...
Click to collapse
No offense but I don't know how you can claim 2x faster. I have tried all the ROMs here and none seems to feel 2x faster. Even if they were faster, the difference was minimal.
in my opinion if u really want manila kind of interface then only install new rom as manila, tf3d doesn't work in landscape. as Dom said keep it as clean as possible. certain other must do are-
- do all your experiments in begninig of installing or trying apps and then hard reset and clean install all apps which u think u required and working well.
- use cleaning tools like cleartemp req very less memory
- always have backup of device with all settings whenever u feel that your phone is in
best state.spritebackup is recommended.
- separately u may use pim backup utilty for fast backup of pim.
- apply file cache and font cache tweak and clsid tweak as discussed in Martin thread it will significantly imrove speed of x1
outie said:
No offense but I don't know how you can claim 2x faster. I have tried all the ROMs here and none seems to feel 2x faster. Even if they were faster, the difference was minimal.
Click to expand...
Click to collapse
i had an official Vodafone germany rom before.
pressing the panel button took me like 2 seconds till something happend. switching a panel took like 3-8 seconds. opening opera took up to 10 seconds and opening webpages was realy slow.
i did some tweaks then (increasing caache, installed SD tuner, etc) and it turn to be a little faster. but still nothing impressive.
believe me if i say that the touch-IT ROM is like 2 times faster. hecks its 4 times faster
but that could be an all messed up Vodafone ROM. and we all know VF tends to mess up ROMs
achmed20 said:
i had an official Vodafone germany rom before.
pressing the panel button took me like 2 seconds till something happend. switching a panel took like 3-8 seconds. opening opera took up to 10 seconds and opening webpages was realy slow.
i did some tweaks then (increasing caache, installed SD tuner, etc) and it turn to be a little faster. but still nothing impressive.
believe me if i say that the touch-IT ROM is like 2 times faster. hecks its 4 times faster
but that could be an all messed up Vodafone ROM. and we all know VF tends to mess up ROMs
Click to expand...
Click to collapse
they do? curses... i ordered mine from the UK, and it said it was vodafone-brand (even though it is unlocked to all networks and carriers). does that mean i oughta flash the ROM to something else ASAP?
vodafone usualy locks features, blocks services, adds own software and so on.
WLAN f.e. didnt work with messenger and a few other services. just so u have a reason to buy their messenger flatrates or web traffic. my n95 had the same problems and most of my other vodafone branded one too. its kinda easy to override those brandings in windows mobile, but its also anoying.
you dont need to flash ur phone, but i have to say ... the touch-it is realy freakin fast. just reflashed cmEX GER and its noticable slower. but its german hehe ^^
dhiru said:
spritebackup is recommended.
Click to expand...
Click to collapse
My question:
As I understand, it can make backup on my memory card, without a PC?
So I can carry with me my backups and open whenever I want??
achmed20 said:
vodafone usualy locks features, blocks services, adds own software and so on.
WLAN f.e. didnt work with messenger and a few other services. just so u have a reason to buy their messenger flatrates or web traffic. my n95 had the same problems and most of my other vodafone branded one too. its kinda easy to override those brandings in windows mobile, but its also anoying.
you dont need to flash ur phone, but i have to say ... the touch-it is realy freakin fast. just reflashed cmEX GER and its noticable slower. but its german hehe ^^
Click to expand...
Click to collapse
ah, i see. well, i`ll check it out when it gets here, and if they put in these ridiculous restrictions i`ll just have to read up and try to flash it :S
scary biz.
If bluetooth randomly shutting off for anyone else? I am running jack's 1.04 lite. Does anyone have this problem with the stock ROM? I mainly just wanted a lite ROM with all the junk and panels removed and some performance tweaks done.
check the addons and fixes sticky thread. thers a mort script to fix that problem
doministry said:
My question:
As I understand, it can make backup on my memory card, without a PC?
So I can carry with me my backups and open whenever I want??
Click to expand...
Click to collapse
yes u are right.
achmed20 said:
check the addons and fixes sticky thread. thers a mort script to fix that problem
Click to expand...
Click to collapse
Thanks, I have seen that, but that is not really a fix. It just checks every few minutes and turns BT back on if its off. Bluetooth shouldnt be shutting off in the first place, especially while I am using it. Is this a problem with all ROMs?
dhiru said:
yes u are right.
Click to expand...
Click to collapse
Thanks, that's awesome.

important overclock question

Hello, just got my htc wing and installed the juststable 6.1 rom and love it! i installed batterystatus version 0.4, dont know if theres a newer one or not.
Anyway, my question is: im overclocking the wing right now at 247, and its nice! however how do i keep the overclock going at all times, even after it goes to sleep and then wakes up, or goes to standby, or even after a soft/hard restart, i would like it to automatically go back to 247 mhz. is there a way to achieve this with batterystatus or a new version of batterystatus? or is there a different overclocking program i could install and use that would do this for me if BS doesnt do it.
someone? please?
HomeScreen++ has checkboxes called "Overclock after reboot" and "Overclock on Wakeup".
is homescreen++ a program?? or is that a feature in batterystatus?

Categories

Resources