Related
After I odined back to stock like 2 times, I flashed bionix. At first I had to push the froyo jl5 kernel with voodoo because rom manager couldn't install cwm. The everytime I reboot my phone, settings reset. Why?
try the KA7 kernel w/Voodoo and see if you get the same result.. any reason you want to use the JL5 kernel that Supercurio stated causes some problems in the OP???
dont' use cwm just flash through recovery wipe completely first manually,
helikido said:
After I odined back to stock like 2 times, I flashed bionix. At first I had to push the froyo jl5 kernel with voodoo because rom manager couldn't install cwm. The everytime I reboot my phone, settings reset. Why?
Click to expand...
Click to collapse
Sounds like you have some gremlins in your phone. I had a market issue that I tried everything on, and I mean everything. So, for kicks I installed the TW version of bionix and it fixed it right back up. Give it a shot. There's usually no clear answer for these things, but I always keep a version of rom manager and titanium backup on my external sd card for quick flashing. Shoot me a PM if your phone still gives you grief.
Hey folks, I'm hoping one of you can help me out with an issue that just cropped up on my phone. I've been running EB01 since it's release and have had no issues whatsoever except for today when I noticed my apps (Titananium Backup, Tapatalk, Root Explorer) we're remembering preferences anymore and/or every time I exit from them and launch again....it thinks it's the first run again.
Did something hose up my permissions/ownerships? Only think I did recently was flash the de-binged browser via CWM.
Any ideas??
What are you running? It may be a permissions problem. Have you tried uninstalling it and reinstalling it?
I'm having a similar issue. Help!
jpolzner said:
Hey folks, I'm hoping one of you can help me out with an issue that just cropped up on my phone. I've been running EB01 since it's release and have had no issues whatsoever except for today when I noticed my apps (Titananium Backup, Tapatalk, Root Explorer) we're remembering preferences anymore and/or every time I exit from them and launch again....it thinks it's the first run again.
Did something hose up my permissions/ownerships? Only think I did recently was flash the de-binged browser via CWM.
Any ideas??
Click to expand...
Click to collapse
I was just about to start a thread about this. I'm having the same problem. I upgraded from blackhole 4.1 (DL30) to Superclean 2.2 EB01 with voodoo lagfix. I got the red CWM flashed via odin and proceeded to install the EB01 modem and the superclean 2.2v (EB01).
The first time I flashed was a disaster, there were issues with Odin completing the flash, so I had to do USB pulls about 4 times (which ended up giving me full "light blue" screens during download mode at times).
After getting Odin to cooperate, I was able to flash the Superclean 2.2v (EB01), and then I restored everything from Titanium Backup, which worked fine until I restarted the phone or left it alone for a couple of hours. Everything would force close (like ADWLauncer Ex, forcing me to use ONLY TWLauncher) and all my preferences were lost. Like gmail would have to resync as if it were new, all the EULA dialogs would come up (like in android market), my trillian profiles were all lost, if i turned off haptic feedback that would turn back on, my ringtones would go back to the defaults, etc.
So I read some other thread in the Development section which said to reflash, and do not do any restores at all. So I reflashed with Super clean 2.3v (EB01), but it happened again, all my preferences would be lost. I also tried to do "fix permissions" from RED CWM, but it just ran for like a fraction of a second and didn't seem like it did anything, as the problem persisted.
I'm planning to go back to DL30 or even DL09 to see if my phone functioned properly or not.
If anyone has a solution to this problem please help!
- Superclean 2.3v (EB01)
I'm thinking it has something to do with flashing either the De-Binged browser or the new market update. Maybe something in the framework-res is getting hosed up?
I just did a wipe and reflashed plain old EB01 and I'm not going to flash any changes and see if the problem comes up again.
emortio said:
I was just about to start a thread about this. I'm having the same problem. I upgraded from blackhole 4.1 (DL30) to Superclean 2.2 EB01 with voodoo lagfix. I got the red CWM flashed via odin and proceeded to install the EB01 modem and the superclean 2.2v (EB01).
The first time I flashed was a disaster, there were issues with Odin completing the flash, so I had to do USB pulls about 4 times (which ended up giving me full "light blue" screens during download mode at times).
After getting Odin to cooperate, I was able to flash the Superclean 2.2v (EB01), and then I restored everything from Titanium Backup, which worked fine until I restarted the phone or left it alone for a couple of hours. Everything would force close (like ADWLauncer Ex, forcing me to use ONLY TWLauncher) and all my preferences were lost. Like gmail would have to resync as if it were new, all the EULA dialogs would come up (like in android market), my trillian profiles were all lost, if i turned off haptic feedback that would turn back on, my ringtones would go back to the defaults, etc.
So I read some other thread in the Development section which said to reflash, and do not do any restores at all. So I reflashed with Super clean 2.3v (EB01), but it happened again, all my preferences would be lost. I also tried to do "fix permissions" from RED CWM, but it just ran for like a fraction of a second and didn't seem like it did anything, as the problem persisted.
I'm planning to go back to DL30 or even DL09 to see if my phone functioned properly or not.
If anyone has a solution to this problem please help!
- Superclean 2.3v (EB01)
Click to expand...
Click to collapse
I'm having the exact same problem. I've been all the way down to DJ05 to see what happens, and when I come back to superclean 2.2 voodoo-ed, I get force closes on everything the first time I restart - that issue was due to the new feature froyo added "automatic restore" in settings > privacy. I got that taken care of by uninstalling all apps.
However, when I restart now, my entire phone defaults back to cleared data. I'm talking every setting that I could think of (usb debugging, sound, brightness, contacts, security pin cleared). I don't get it at all. Everything else has been working right though.
Just thought I would share - I'm kinda still in limbo till I figure out what I should do.
brettdacosta said:
I'm having the exact same problem. I've been all the way down to DJ05 to see what happens, and when I come back to superclean 2.2 voodoo-ed, I get force closes on everything the first time I restart - that issue was due to the new feature froyo added "automatic restore" in settings > privacy. I got that taken care of by uninstalling all apps.
However, when I restart now, my entire phone defaults back to cleared data. I'm talking every setting that I could think of (usb debugging, sound, brightness, contacts, security pin cleared). I don't get it at all. Everything else has been working right though.
Just thought I would share - I'm kinda still in limbo till I figure out what I should do.
Click to expand...
Click to collapse
I wonder if it has to do with the type of EB01 we're using or the CWM. I flashed CWM red via Odin, rather than updating via Rom Manager or update.zip. Also I used the EB01 Walkthrough in the fascinate developers section, the link is:
http://forum.xda-developers.com/showthread.php?t=948722
***UPDATE***
I resolved the problem... I think. I noticed there was a difference in the file names of the EB01 Modem in the walkthrough link I provided on the last line of the paragraph above and the EB01 Modem given in the original EB01 stock thread (http://forum.xda-developers.com/showthread.php?t=948679). I flashed with the eb01a_modem.tar given in the stock thread and then upgraded to Super Clean with Voodoo (v. 2.4 as of this writing). The market DID restore all the apps, before I was able to stop it, but after I restarted, there were no force closes nor were there any loss of preferences. I hope the modem issue was what was wrong...
Started doing it again this morning. This time I did not flash any mode via ROM Manager. Only things I did was de-bloat using Root Explorer and Titanium Backup.
Not every app started forgetting preferences, some still reemebered. Any of the devs have an idea of what's going on here? I'm running the plain old, fully-bloated EB01 ROM. No voodoo, no de-odexed, or anything like that.
I think it's a dbdata partition issue. I can't say how to fix because it's above my paygrade, but you may have to wait until it is officially released.
jpolzner said:
Started doing it again this morning. This time I did not flash any mode via ROM Manager. Only things I did was de-bloat using Root Explorer and Titanium Backup.
Not every app started forgetting preferences, some still reemebered. Any of the devs have an idea of what's going on here? I'm running the plain old, fully-bloated EB01 ROM. No voodoo, no de-odexed, or anything like that.
Click to expand...
Click to collapse
Try the Odin back to stock...DI01, wipe everything. Reroot and and get cwm. Then ODIN EB01 Modem Tar followed by super clean 2.4 install through cwm. Be sure to wipe data and cache before flashing super clean.
I there a reason I have to go all the way back to DI01, or can I use any All-In-One Odin package that writes the ROM, Kernel, & Radio?
jpolzner said:
I there a reason I have to go all the way back to DI01, or can I use any All-In-One Odin package that writes the ROM, Kernel, & Radio?
Click to expand...
Click to collapse
I suggest that typically before anything else b/c it seems to help most. I've never experienced these issues but many suggest this is a viable method to remedy certain problems. Don't see why you couldn't try the odin DL09 all-in-one and wipe the hell out of it and try again. Good Luck.
Is the corruption in the dbdata partition caused by an older version of CWM or a problem in the EB01 ROM itself?
Is it safe to go back to EB01?
jpolzner said:
Is the corruption in the dbdata partition caused by an older version of CWM or a problem in the EB01 ROM itself?
Is it safe to go back to EB01?
Click to expand...
Click to collapse
I believe it's currently inconclusive. There is speculation about exactly what causes it hence the reason I suggest wiping everything and then flashing the most recently provided stuff. That way it'll narrow things down. Someone can correct me, but if you odin back to stock, I'm 99% sure super cleans 2.4 voodoo kernel includes the new cmw. I was on green cmw unitl I flashed the seperate voodoo kernel posted by jt. I haven't had any issues.
Its almost certainly dbdata corruption. The cause is...yeah questionable. Seems most common with voodoo with the current hack being used to get it working with froyo.
Sent from my SCH-I500 using XDA App
I've never run Voodoo on my phone, but I did my initial install of EB01 with one of the older "Green" CWM versions.
adrynalyne said:
Its almost certainly dbdata corruption. The cause is...yeah questionable. Seems most common with voodoo with the current hack being used to get it working with froyo.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Any other suggestions or fixes?
I went all the way back to DI01, then flashed to EB01 using an Odin All-In-One and now 48-72 hours later, my apps (most notably Tapatalk, Root Explorer, and Titanium Backup) think it's the first time they've run every time I launch it.
Shouldn't have going back to DI01 fixed the corruption since it reformats the ROM partition? Also, something I notice was that flashing to DI01 or EB01 using odin did not get rid of the new CWM Recovery.
Would running the permission fix correct the issue?
jpolzner said:
Any other suggestions or fixes?
I went all the way back to DI01, then flashed to EB01 using an Odin All-In-One and now 48-72 hours later, my apps (most notably Tapatalk, Root Explorer, and Titanium Backup) think it's the first time they've run every time I launch it.
Shouldn't have going back to DI01 fixed the corruption since it reformats the ROM partition? Also, something I notice was that flashing to DI01 or EB01 using odin did not get rid of the new CWM Recovery.
Would running the permission fix correct the issue?
Click to expand...
Click to collapse
No...are you running voodoo? And what rom are you using?
EB01 Fully Bloated, Non-Voodoo Kernel
Baseband version: S:i500.04.V.EB01
Kernel version: 2.6.32.9
Build number: SCH-I500.EB01
http://forum.androidcentral.com/ver...roms-w-root-new-clockwork-updated-2-15-a.html
Try This...
This will hopefully repartition and clean dbdata corruption. BTW, I couldn't get 2.2 to run on my phone until I odin flashed a ROM which allowed me to then flash Adrynalyne's 2.4.
DI01, DJ05, DL09 did not work for the fix. Eclair worked fine, but Froyo would not work until I flashed a 2.2 odin.
Do I need to check the "Re-Partition" option in Odin when flashing or does it do it automatically?
I am struggling with an issue that hit me today.
I am unable to use Rom Manager to install JT's bootanimation kernel. It downloads fine but upon reboot, the phone hangs forever at the SAMSUNG splash screen. I have updated to the new red CWM, and am wondering if that is not part of the problem, but regardless, I'd like to switch over to that kernel...
So - does anyone have a link they can provide? I would like to DL and install via CWM, but I am not familiar with where Rom Manager puts the files to try to get at them that way...
Any assistance in getting the file is greatly appreciated.
M00NEY said:
I am struggling with an issue that hit me today.
I am unable to use Rom Manager to install JT's bootanimation kernel. It downloads fine but upon reboot, the phone hangs forever at the SAMSUNG splash screen. I have updated to the new red CWM, and am wondering if that is not part of the problem, but regardless, I'd like to switch over to that kernel...
So - does anyone have a link they can provide? I would like to DL and install via CWM, but I am not familiar with where Rom Manager puts the files to try to get at them that way...
Any assistance in getting the file is greatly appreciated.
Click to expand...
Click to collapse
Have you already flashed the eb01 modem via odin?
M00NEY said:
I am struggling with an issue that hit me today.
I am unable to use Rom Manager to install JT's bootanimation kernel. It downloads fine but upon reboot, the phone hangs forever at the SAMSUNG splash screen. I have updated to the new red CWM, and am wondering if that is not part of the problem, but regardless, I'd like to switch over to that kernel...
So - does anyone have a link they can provide? I would like to DL and install via CWM, but I am not familiar with where Rom Manager puts the files to try to get at them that way...
Any assistance in getting the file is greatly appreciated.
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
Ok I'll do my best to describe where they are. Sd card/clockwork mod/downloads. Now from here I have some of jt's stuff in a couple of different places so u just have to open them up and look. But two of them I can remember of the top of my head are. deodexed.com and galaxysense.com. And sonofskywalker3 stuff is under androiddoes.net
http://dl.dropbox.com/u/15962248/bootani_kernel.zip
designed for DL30, but I have used it on EB01. Use at your own risk. It has no support for startup sounds.
Is the one in rom manager meant for eb01? Trying to fing a non-voodoo kernel to always boot to red and don't want to do voodoo(yet).
try downloading it and not using rom manager to reboot the phone to recovery, use the power off screen to get there or do it manually. then in cwm navigate to the folder your downloads in.
This post is only for discussing all issues regarding the use of the Bonsai roms. We can talk here about any version from 1.0.0 to x.x.x
Due to some political issues please do not post any links to the Bonsai website! This thread is just for us users and don't expect the developers of Bonsai to ever visit here.
One last thing >
nor
Yes this try to keep this thread open.
Sent From My Evo Killer!
So is there a way to get a 600mhz step in the kernal for bonsai 4.0 last i heard he was going t put it in back in 3.0.1 but still not there. Or is there an easy way to included it in the kernal page file or something that set cpu uses? Also is there a way to get the voodoo color fix or a tweak that works that will make the brightness lower at the lowest setting for 4.0 becase the brightness on this screen is way to brght at night time. I used to have a tweak like this in syndicate rom for 2.1 it was great. Any info would be great thanks guys.
Sent from my SPH-D700 using XDA App
I installed bonsai 4.0.0.1 and it flashed fine, then it tried to restart and got stuck at the samsung boot screen, would not go past that.
So I battery pulled and tried to install another rom (verion 4) and it had an error in CW installing,
Then I tried installing a rom I have used before (epic experience) and CW would not install that one either.
So I used Odin to go back to stock everything and then unlocked it and now I am on a stock rom rooted.
Why do you think it is hanging there? I am scared to flash again as I think it will do the same? But if the forum needs the exact error msg I will install it again as I really want to get this rom working.
Thanks,
Force
forcelite said:
I installed bonsai 4.0.0.1 and it flashed fine, then it tried to restart and got stuck at the samsung boot screen, would not go past that.
So I battery pulled and tried to install another rom (verion 4) and it had an error in CW installing,
Then I tried installing a rom I have used before (epic experience) and CW would not install that one either.
So I used Odin to go back to stock everything and then unlocked it and now I am on a stock rom rooted.
Why do you think it is hanging there? I am scared to flash again as I think it will do the same? But if the forum needs the exact error msg I will install it again as I really want to get this rom working.
Thanks,
Force
Click to expand...
Click to collapse
Were you using CWM 3.0.0.6 or 3.0.0.5 ?
Sent from my SPH-D700 using Tapatalk
Good question as i was just going to as a question about EXT4 and CW.
The rom manger is version 3.0.1.4
however the CW mod flashed is version 3.0.2.4
It only has 2 to choose from in rom manger, 3.0.2.4 or an older 3.0.1.4
Not sure were people are getting these other versions from.
Force
PS I booted into CW and saw it was v2.5.1.0
am I way off?
abrcrmdl23 said:
So is there a way to get a 600mhz step in the kernal for bonsai 4.0 last i heard he was going t put it in back in 3.0.1 but still not there. Or is there an easy way to included it in the kernal page file or something that set cpu uses? Also is there a way to get the voodoo color fix or a tweak that works that will make the brightness lower at the lowest setting for 4.0 becase the brightness on this screen is way to brght at night time. I used to have a tweak like this in syndicate rom for 2.1 it was great. Any info would be great thanks guys.
Click to expand...
Click to collapse
I can't remember what stepping is on the kernel as we have been beta testing 4.0.1 and have been mainly dealing with a new setCPU governor called interactive. Were also still working on the other governor called smartass as well. I think that the stepping goes directly from 400 to 800, but we are always looking to go faster and with better battery life. I'll bug Randy and Mammon about it.
The sound will be Voodoo version 7, but I don't think the Voodoo color fix is going to make it into 4.0.1. Sorry, but we can't do everything...at least not all at the same time.
forcelite said:
I installed bonsai 4.0.0.1 and it flashed fine, then it tried to restart and got stuck at the samsung boot screen, would not go past that.
So I battery pulled and tried to install another rom (verion 4) and it had an error in CW installing,
Then I tried installing a rom I have used before (epic experience) and CW would not install that one either.
So I used Odin to go back to stock everything and then unlocked it and now I am on a stock rom rooted.
Why do you think it is hanging there? I am scared to flash again as I think it will do the same? But if the forum needs the exact error msg I will install it again as I really want to get this rom working.
Thanks,
Force
Click to expand...
Click to collapse
Did I see a similar post on the Bonsai website earlier today? I just want to verify that you were using CWM 3.0.0.6 as anything else will cause problems like that. Also when you get to these kinds of problems you should attempt a second flash of Bonsai before going to the trouble of a ODIN job. A second flash seems to fix a whole variety of odd kind of problems.
As you can imagine with all the beta testing I do I'm always finding ways to corrupt my phone. Some days I have managed to bork it 3-5 times.
I decided to test out today a 4.0.1 install directly from DI18 > CWM 3.0.0.6 > Bonsai 4.0.1 full rom. It went great with no problems at all and running just fine, so far
I think that is my problem, I am using a the CW that came with the one click unroot.
So I guess I need to do this, even if I am already rooted?
http://forum.xda-developers.com/showthread.php?t=897612&highlight=EXT4
PS
I booted into CW and saw it was v2.5.1.0
bluetooth
I could not get bonsai 3.0.1 or 4.0.0 to pair with my bluetooth headset. Tried pairing on an epic with acs 1.1 and paired fine. Anyone else have a pairing problem?
forcelite said:
Good question as i was just going to as a question about EXT4 and CW.
The rom manger is version 3.0.1.4
however the CW mod flashed is version 3.0.2.4
It only has 2 to choose from in rom manger, 3.0.2.4 or an older 3.0.1.4
Not sure were people are getting these other versions from.
Force
PS I booted into CW and saw it was v2.5.1.0
am I way off?
Click to expand...
Click to collapse
Do not use Rom Manager to be installing the beta CWM files. The correct way is with one of the 1 step CWM tools in the development forum. 3.0.2.4 is half-finished and is very difficult even to navigate through the various menu's. I know this because I tried out that CWM version for some grins one day. It will majorly screw your Epic if your not extremely careful. When DI18 was prevalent Rom Manager worked great to root your phone. When we started the move into the Froyo roms Rom Manager quit working and that is why the 1 click then became more prevalent.
Just follow the directions posted all over the place and Bonsai will install just fine and you will be a happy camper.
I am installing it now after updating to CW3 (from CW2.5) . I think it will come out fine now, I am an idiot and didn't realize the original one click root installed an older version of CW.
Thx All,
Force
forcelite said:
I think that is my problem, I am using a the CW that came with the one click unroot.
So I guess I need to do this, even if I am already rooted?
http://forum.xda-developers.com/showthread.php?t=897612&highlight=EXT4
PS
I booted into CW and saw it was v2.5.1.0
Click to expand...
Click to collapse
The linked one is the correct one for Bonsai version 4.x.x.
olddocwhite said:
I could not get bonsai 3.0.1 or 4.0.0 to pair with my bluetooth headset. Tried pairing on an epic with acs 1.1 and paired fine. Anyone else have a pairing problem?
Click to expand...
Click to collapse
Some people do and some don't I do know that Randy has instituted quite a few bluetooth linux upgrades into 4.0.1 rom. Some people are able to clear the data, but the problem usually reappears. Mattalica76 has the link to a more permanent fix to this problem, give him a PM.
Duplicate... Sorry
forcelite said:
I am installing it now after updating to CW3 (from CW2.5) . I think it will come out fine now, I am an idiot and didn't realize the original one click root installed an older version of CW.
Click to expand...
Click to collapse
Don't beat yourself up as we all have been there. It's a process of learning new skills and a new language. Give yourself a pat on the back for getting through this when 98% of the world would have said screw it or not even tried at all.
Actually it didnt boot this time either, it installed the firs ttime fine, then kept booting after samsung in a loop,
So I went into CW3 and tried to flash bonsai 4.0.01 again and it gave me this error. It is long, however I shortened it, I have the whole error photo copied)
Finding package
Opening package
Install update
Assert failed getprop (“ro.product.device)”)
Sph-700
E:error in /SDcard/bonsai……….
(status 7)
Installation aborted
Top Nurse said:
Don't beat yourself up as we all have been there. It's a process of learning new skills and a new language. Give yourself a pat on the back for getting through this when 98% of the world would have said screw it or not even tried at all.
Click to expand...
Click to collapse
Thanks for the support T Nurse,
I loaded the EC05 stock from Odin as I still dont have a grasp on EXT4 file system.
last thing I tried was cw3.0.0.6 and loaded Bonsai and it installed, just hung at samsung screen. might be a corrupt rom file.
1) So after flashing CW3, bonsai is supposed to change the file system over to EXT4 automatically after flashing, correct?
2) will windows 7 be able to read the sd card after it is changed over to ext4 (by bonsai), or will it have 2 partitions, one windows can read fat32 and the other ext4 it cant.
forcelite said:
Thanks for the support T Nurse,
I loaded the EC05 stock from Odin as I still dont have a grasp on EXT4 file system.
last thing I tried was cw3.0.0.6 and loaded Bonsai and it installed, just hung at samsung screen. might be a corrupt rom file.
1) So after flashing CW3, bonsai is supposed to change the file system over to EXT4 automatically after flashing, correct?
2) will windows 7 be able to read the sd card after it is changed over to ext4 (by bonsai), or will it have 2 partitions, one windows can read fat32 and the other ext4 it cant.
Click to expand...
Click to collapse
CWM3 will convert your filesystem to ext4 the first time you boot into it. It won't touch the sdcard so that won't be converted. After CWM is finished with the conversion, do not reboot the phone, you will then flash Bonsai.
forcelite said:
Thanks for the support T Nurse,
I loaded the EC05 stock from Odin as I still dont have a grasp on EXT4 file system.
last thing I tried was cw3.0.0.6 and loaded Bonsai and it installed, just hung at samsung screen. might be a corrupt rom file.
1) So after flashing CW3, bonsai is supposed to change the file system over to EXT4 automatically after flashing, correct?
2) will windows 7 be able to read the sd card after it is changed over to ext4 (by bonsai), or will it have 2 partitions, one windows can read fat32 and the other ext4 it cant.
Click to expand...
Click to collapse
After flashing the boot script of cwm 3.0.0.6 you then have to power off. Then hold down the camera button, vol down, and power keys at the same time and the EXT4 script will automatically start to format your system. Please keep in mind that it is not formatting the SD card, but only the read only memory of the phone.
After you finished a few beers it will be done and will drop you back to cwm. Do not reboot, but flash bonsai. After bonsai is finished then reboot.
Sent from Bonsai 7.0.3
So basically, I tried to help out my friends continuum and ended up with some problems.. these are the exact steps I took..
-Flashed adrynalynes test4 cwm file via odin..
-Put yellow_update.zip on the sdcard, and updated it through that, which seemed -to work
-Flashed within CWM, IMNUTS 530 PBJ voodoo kernel, and rebooted
-Converted successfully as stated by the robot voice, but after it was done I had both the scrambled screen issue, as well as I was unable to download things from the market.
-I attempted to convert back to rfs by disabling lag-fix.. but I still had the problems
**After rooting which seemed successful, I also did not have Superuser.apk installed, and since i could not get a file explorer from the market I am basically screwed.
I have done quite a bit of reading and people seemed to have solved these problems so it must have been something that I was doing wrong originally. One thing I found is that I should try using the blue update instead of the yellow one..
Also has anybody flashed the newest IMNUTS voodoo kernel without facing market issues.. or how about the nonvoodoo one??
What I want to do now is get back to stock unrooted, simply so I can be sure that Im starting clean when I attempt to root again.. (or should I just try to flash stock rooted)..
If anybody has faced issues like this or know how i can fix them, please let me know.. THANKS
These problems are known, and you can fix them by flashing adrynalynes kernel and odining to dl17 stock xP
Sent from my SCH-I400 using XDA Premium App
kamikazemike6 said:
So basically, I tried to help out my friends continuum and ended up with some problems.. these are the exact steps I took..
-Flashed adrynalynes test4 cwm file via odin..
-Put yellow_update.zip on the sdcard, and updated it through that, which seemed -to work
-Flashed within CWM, IMNUTS 530 PBJ voodoo kernel, and rebooted
-Converted successfully as stated by the robot voice, but after it was done I had both the scrambled screen issue, as well as I was unable to download things from the market.
-I attempted to convert back to rfs by disabling lag-fix.. but I still had the problems
**After rooting which seemed successful, I also did not have Superuser.apk installed, and since i could not get a file explorer from the market I am basically screwed.
I have done quite a bit of reading and people seemed to have solved these problems so it must have been something that I was doing wrong originally. One thing I found is that I should try using the blue update instead of the yellow one..
Also has anybody flashed the newest IMNUTS voodoo kernel without facing market issues.. or how about the nonvoodoo one??
What I want to do now is get back to stock unrooted, simply so I can be sure that Im starting clean when I attempt to root again.. (or should I just try to flash stock rooted)..
If anybody has faced issues like this or know how i can fix them, please let me know.. THANKS
Click to expand...
Click to collapse
just download dl17 stock odin image and you'll be back to full stock with superuser and market should work.
and upgrade to FROYO, just saying.....
and i am not sure why alot of people had market problems because i used both voodoo and non-voodoo and had no problems at all, maybe i'm just lucky...