Related
I have a 8125 and I was able to unlock it fine. After unlocking it I upgraded to the underground crossbow edition rom - which the 8125 rebooted and was running. I tried out a couple things and everything seemed to be running/working fine. It was getting late so I put it down and went to bed. This morning when I got up the phone was off so I went to turn it on and nothing happened. I figured it just ran out of battery power plugged in the charger and guess what no red light on. I have tried everything under the sun but I cant get it to charge or startup. Anyone have any ideas? It was working fine.
i know u said u've tried everything and i don't mean to sound like i'm takin the buscuit, but leave it on charge for n hour, then try bootloader. taking the battery out completely for a while could work.
i had so many problems with crossbow! think this was one of them.
Unplugged
Well so far I left the charger plugged into the phone with the battery in it for over an hour now - with no luck. The red charging light doesn't even come on. Did you have that problem? I also left the battery out and plugged in - still nothing. Tried taking the battery out and then putting it back in while plugged in - no go.
I have not tried the "bootloader" - but the phone will not turn on at all or respond in anyway. Its in a powered down state (or so it seems) - I dont think bootloader will work?? But I dont know anything about bootloader - is it on the ftp site and how do I use it?
Any chance the battery could have been completely discharged?..just a thought. I think i read that completely flat batteries wont charge up via usb. Disregard if thats a silly suggestion, just thought id offer my two cents.
try getting a new battery and see if it boots up...it can be your battery.and you are trying to charge with an AC adapter right?
Wall Charger
I am charing it via the wall charger (not usb) and I am going to try to get another battery. Just weird that I never had a battery problem until I install the wm6??!! Unless the damn thing drained my battery dry and somehow damaged the battery. I called Cingular and they are sending me another unit as its still in warranty. So we'll see when I get it - I will try the new battery. Strange. Very Strange - because everything was working last night.
Strange
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Could be a bad battery. You need to test out with some one else battery
HuddaDudda said:
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Click to expand...
Click to collapse
HuddaDudda said:
Well after leaving the battery out all afternoon I took a go at the phone again, put in the battery then turned it on. It actually started booting up - showing the WM6 bootscreen. After about a minute it shut down like it was out of power. Strange. I know the phone is not bricked because if it was it wouldn't have just done what it did. Anyone have any suggestions how to fix it?
Click to expand...
Click to collapse
u shud have plugged it in while it was booting...did u?
New Battery
Well I finally got the new battery I ordered today. When I put it into my phone it will boot into wm6 fine but will not sync with activesync 4.0 or charge via USB or plugged into the wall. I uninstalled activesync, rebooted my computer and installed Activesync 4.5 - but still no luck with the phone via usb syncing with my pc. Also when the phone in plugged into the wall via the wall charger it does not charge. I am beginning to think the port on the bottom somehow was disabled from the rom update, although I dont see any posts with people having that problem. I guess my next option is trying to reflash it to stock rom via a sd card since it wont connect via USB - however I can not find the information step by step how to do this. Can someone point me in the right direction?
Try going to the bootloader screen: Turn off your phone and then hold the camera button while you turn it on. When you are at the Rainbow screen (thats the bootloader) plug in your USB cord. You should see in the bottom left (above the left soft key) where it says USB. If it doesn't then I'd say your USB port is broken (I'm not aware of any ROM being able to disable that).
As for flashing from the SD card, I believe thats documented in the Wiki...
Probably the wrong place but this forum is beyond navigation for newbies like me...
if you have let your battery run dry and can no longer charge and get into your win7 hd2, here's how I did it...remove sim and sd card, plug charger in, it will boot and charge again... worked for me...
I'll make sure to keep this in mind, if it works! I'll make an edit to announce my results when that unfortunate day comes.
Pulling the battery out and sticking it back in works too.
NeoGreendawg said:
Pulling the battery out and sticking it back in works too.
Click to expand...
Click to collapse
not for me. if its really discharged and i remove the battery, put it back, the charge led (orange) goes on and after 5sec its off again and nothing happens
NeoGreendawg said:
Pulling the battery out and sticking it back in works too.
Click to expand...
Click to collapse
Nope, that only works if you still have charge left in battery. removing and putting it back in also unlocks it because if you power on phone with USB in it locks for some reason. Well mine does anyway.
If your battery is completley dead then you have no choice (atm) to either charge the battery externally with a dock or by using a USB cable with end cut off (red wire to positive/black to negative).
NeoGreendawg said:
Pulling the battery out and sticking it back in works too.
Click to expand...
Click to collapse
Yes. That's what I also do many times. Never fails
No need to pull out your micro sd, it might cause your rom corrupt. Be careful!
Here's What works for me
Remove the battery .. put it back ... keep the down volume key pressed n press the power key ... THE phone will be on recovery screen... plug THE usb in .. leave it like this for like 15 mins n now reboot . It will be recharged just enuff to power the phone on ... keep the usb plugged and it will start rechaging ...
None of these tricks worked for me, and I didn't want to cut my usb cable...
But I solved the problem with dual boot. Now I can charge my hd2 when it's turned off, and I even have my battery able to charge up to 100%
I presume the phone will not charge if theres not enough power to enter WP7.
I thought the phone would charge by the USB power lead if its turned off.
I guess enter MAGLDR or the Tricolour screen will allow it to charge?
TheATHEiST said:
Nope, that only works if you still have charge left in battery.
Click to expand...
Click to collapse
I've let my phone turn itself off twice since I've been on WP7 and pulling the battery has been enough to get it to boot up far enough to charge both times so maybe I've just been lucky or maybe the phone shuts down before it's completely discharged...
Oh man, this happened to me the other day. Battery died, phone wouldn't hold a charge. Freaked out!! But after some trial and error it worked.
Its not possible to charge the phone when its turned off?
This happened to me when I was still using WinMo. When I connected the phone to charger, it seemed dead (no led light), but after some time (I left it charging over night) it catched up and charged.
This is not possible with WP7? I wouldnt say, that MGDLR could change the way of charging when the phone is off.
keep an external charger for this problem. at least we can hope in the next update of the ROM will solve this problem
In my case, since I fall asleep while listen to music, in morning I wake up, phone already shutdown and can not boot. Even when I plug in, it boot to htc welcome then reboot.
I have tried to pull out the battery and put it back but nothing happen, my phone keep reboot.
So, I pull out the battery and charge with external charger (can charge battery only without phone). Then after 30min put it back then it works.
Thanks god. So be prepare an external charger because WP drain more power then we thought even with the warning 10%. I can not have enough power left for an over night.
This works for me.
This is known maglard issue. This steps works for me every time.
1. Remove battery and after few seconds place it back.
2. Connect your phone with PC through USB
3. Now enter bootloader by pressing Vol Down and Power buttons at same time.
4. Leave it connected for a few minutes.
5. Disconnect your phone from PC and remove battery for a few seconds.
6. Now place battery back and power up your phone.
7. You will start WP7 and now you can continue charging battery normaly.
MGDLR choose last option
it hapens to me and what i have done is in MGDLR I choose last option an it satart charging after some minutes you have to take out the baterry and reboot
it work for me
Happened to me this morning:
1) Took battery out, placed in cradle, put battery in, and held down 'POWER' whilst it booted to MAGLDR.
2) Selected USB Mass Storage Mode, waited for 10 minutes, pulled the battery out, whilst still in the cradle.
3) Re-inserted battery, allowed WP7 to boot, and orange light came on whilst booting, and started charging in WP7.
Thanks to all in this thread!
Nick
Tghe VOL DOWN + POWER works. Happened to me yesterday and after 10 minutes in tricolor I was able to boot.
Bootloader Charges Battery
VICTORY! I was frustrated, and pulling out the battery for a few seconds didn't help at all. Putting the phone in the bootloader (tricolor) screen for 10 minutes worked for me. Phone is back in WP7 and is charging.
No need to pull out battery just hold down power button boot to magdlr main menu leave charger in for 5 mins than boot wp7 (first option in menu) than shud work
Sent from my HD7 T9292 using XDA Windows Phone 7 App
Need some help hope i post this in the right place. i have gingerbread on my HTC HD2 and was converting back to windows to sell on ebay and i started it was almost done when i relised before i started i forgot to charge the battery and it ran out before it was done know the phone what turn on at all. i plug it in the wall charger nothing, plug it into the computer nothing tried everything nothing. do you think that the battery is that dead and it was in the proccess that the chargers dont work on it no more. would it work maybe if i had a charged battery to put in it. it mite come back on. any help would be great thanks.
lpartridge said:
Need some help hope i post this in the right place. i have gingerbread on my HTC HD2 and was converting back to windows to sell on ebay and i started it was almost done when i relised before i started i forgot to charge the battery and it ran out before it was done know the phone what turn on at all. i plug it in the wall charger nothing, plug it into the computer nothing tried everything nothing. do you think that the battery is that dead and it was in the proccess that the chargers dont work on it no more. would it work maybe if i had a charged battery to put in it. it mite come back on. any help would be great thanks.
Click to expand...
Click to collapse
Just keep it plugged in for 1-2 hours and then try booting in to try color screen bootloader and go from there.....
If you have MAGLDR installed then you can not charge the battery when the phone is off.
You should try to charge the battery using an external charger.
Edit: If you have a friend with HD2 and windows Mobile 6.5 then you could use the phone to charge you battery.
Wrong, you can charge it while it's off.
StephanV said:
Wrong, you can charge it while it's off.
Click to expand...
Click to collapse
really? are you sure? because there are a lot of references to the magldr bug that wont allow charging (or even powering on without pulling the battery) if you try to charge with the phone turned off.
well i tried to charge for the last 2 hours nothing tried to remove battery nothing. Iam going to try and find a charged battery to see if the phone mite turn on or something. ill post later to let yall know what happen tho. thanks for the help.
samsamuel said:
really? are you sure? because there are a lot of references to the magldr bug that wont allow charging (or even powering on without pulling the battery) if you try to charge with the phone turned off.
Click to expand...
Click to collapse
Just give it a try man and see for yourself whether it charges or not....
what are you guys fighting about man, they just updated the magldr v1.3 and yeah we can now charge the phone while its off
Sukuya said:
what are you guys fighting about man, they just updated the magldr v1.3 and yeah we can now charge the phone while its off
Click to expand...
Click to collapse
Wrong x2.
1. No one is fighting.
2. With new magldr, phone turns itself on when plugged in. Charging when off is not possible. The battery requires management which is only implemented in software. It may hold a small charge if you have magldr installed, but it won't charge fully, or properly. Also, it's not likely he's got the new magldr if he's returning back to windows.
Lastly, for the OP, what method did you use to return to winmo? And which winmo rom did you use?
Sent from my HD2 NANDroid using XDA App
Find a way to charge your battery and everything it's going to be just fine.Your phone it is going to work.
Changing the battery should work.
I'm new here so basically with new 1.13 or later phone can't be charging if it's not turned on?
Makić said:
I'm new here so basically with new 1.13 or later phone can't be charging if it's not turned on?
Click to expand...
Click to collapse
Read? Phone turns itself on if you connect a charger. Phone has NEVER charged while off with nand. This way at least you don't have to pull the battery to turn the phone on.
Sent from my HD2 NANDroid using XDA App
Just in case: If you on same situation that described on first post try this:
Q: If you completely run down the battery, would you be able to charge it with the phone again?
A: If your battery is dead, press and hold Vol Down and plug in USB cable / charger at same time. Phone will boot into bootloader and charge there just fine. Leave for 20 mins, pull battery, reboot and charge normally. If phone has just run down, plugging in the charger will usually turn it on.
Its found on one NAND thread and goals goes to g.lewarne
Actually i was on same situation and this helped on first try.
check the connection between battery and phone , the metal things i mean.
Perhaps, it is off the subject, but...
Poster #1: why do you want to get rid of this beautiful phone?
Just curious...
ok i bought another phone and i took out the charged battery from it and put it in the bricked HTC and it does nothing. now i know it was almost reverted back and i think the battery ran down but Iam not completely sure but maybe it could have been in the reverting software i used and maybe it just like lock up or something cause at that point you couldnt see the battery indicator. now i guess ill just have to sell on ebay for parts but it would be cool to try and un-brick it or try and figure it out.
So I have been using my HD2 with Android installed in the internal memory for at least 6 months with no issues. My HD2's battery life has dwindled down to being about 3 hours, so I ordered a new one. I popped in the new battery and plugged the phone in, and now the phone will continuously reboot itself while plugged in, when it reaches the Dark Forces Team screen. I installed the old battery, and the same thing happens. The phone will not turn on unless it in plugged in. Also is there anyway to charge the phone while it is off? When you plug it in, it turns itself on automatically. Lastly, I don't know if this affects anything, but I did drop the phone from about 3 feet with the charger in, and now the plug has to be pushed in to get charged. Thanks for all your help guys.
simplesauce said:
So I have been using my HD2 with Android installed in the internal memory for at least 6 months with no issues. My HD2's battery life has dwindled down to being about 3 hours, so I ordered a new one. I popped in the new battery and plugged the phone in, and now the phone will continuously reboot itself while plugged in, when it reaches the Dark Forces Team screen. I installed the old battery, and the same thing happens. The phone will not turn on unless it in plugged in. Also is there anyway to charge the phone while it is off? When you plug it in, it turns itself on automatically. Lastly, I don't know if this affects anything, but I did drop the phone from about 3 feet with the charger in, and now the plug has to be pushed in to get charged. Thanks for all your help guys.
Click to expand...
Click to collapse
1- dropping your phone with damage may certainly have caused this. did the problems start right after?
2- with magldr you cannot charge with it turned off.
3- try to boot into bootloader. is that possible?
I didnt notice anything different after dropping it, except now I usually have something wedged under the charger. I tried Loading in through MAGLDR BOOT AD NAND. No luck.
you misunderstood.
can you boot into bootloader (not magldr)? the tricolor screen- turn phone off, turn on and hold down the volume down key.
if you can (and should be able to do so) - i would start over. flash back to WM. i never do task29 though conflicting reports. then reinstall whatever OS you are using. if problems persist on WM, then is hardware. however, to flash back to WM you will need battery life (>50%) which may represent a problem. but try to get into bootloader first.
Hi,I have a Android gingerbread 2.3,haspl v.3,MAGLDR113,it's second time my htc block and dont want to restart from the buton,i have remove the battery and it dosnt want to turn on ,there is no screen,the battery was charget,but the red light don't light when i plug the cabel,in my PC dont recognise usb,nothing and the phone,i try for 1 day to remove a battery,but no result,1st time when it happens it work,but for a week i can't use it,Sorry For my English,Some ideas what can i do before i took it back in the store
sounds like it could be a simple flat battery. when magldr is installed you cannot charge the phone unless android is running, so when it is off it does not charge.
if you can try another battery, or your battery in a winmo hd2, that will tell you if its teh battery.
If you have a spare usb cable (any type, doesnt have to be a hd2 micro usb cable) cut end off, bare red and black, hold red to + and black to - on teh battery for about a minute, which should give it enough power to charge.
Also check very carefully that you dont have a bent battery pin from all teh battery in/out. they bend easily.
i hava a Bat charger and charge the bat all night,and the morning it show me that bat is charget,put it on the phone,but nothing ... cant turn on
Maybe battery is dead. Do you own a volt meter an can check the voltage provided by the battery? It shoud show up about 4 volt.
---------- Post added at 08:12 PM ---------- Previous post was at 08:04 PM ----------
Maybe battery is dead. Do you own a volt meter and can check the voltage provided by the battery? It shoud show up about 4 volt.
i took the bat to my friend with devace to check the battery,and everything is OK,but the phone didn't turn on,Can i reinstal the Android ?and how can i do it
Is there a program that can connect to the phone and erase everything
To wipe the phone install the HD2 toolkit, you can download it here.
It includes every tool needed for maintaining your HD2.
Be sure to install the drivers!
Start the program and press the Task29 button, follow the instructions provided. When it's finished your HD2 will be fully wiped, so you would need to reinstall everything.
Do so by doing a MAGLDR repartition. After that choose MAGLDR update recovery to flash the Clockworkmod recovery.
Then go into the Clockworkmod recovery and flash your rom.
Now your HD2 should be fully wiped
BUT! If your PC doesn't even recognize your HD2, and you can't even get to the bootloader screen by pressing and holding both volume down and the "end call" button. Then it's probably a hardware failure.
Maxp101 said:
To wipe the phone install the HD2 toolkit, you can download it here.
It includes every tool needed for maintaining your HD2.
Be sure to install the drivers!
Start the program and press the Task29 button, follow the instructions provided. When it's finished your HD2 will be fully wiped, so you would need to reinstall everything.
Do so by doing a MAGLDR repartition. After that choose MAGLDR update recovery to flash the Clockworkmod recovery.
Then go into the Clockworkmod recovery and flash your rom.
Now your HD2 should be fully wiped
BUT! If your PC doesn't even recognize your HD2, and you can't even get to the bootloader screen by pressing and holding both volume down and the "end call" button. Then it's probably a hardware failure.
Click to expand...
Click to collapse
Magldr repartition flashes cwm so no need for the update recovery step. That's for, well the clue is in the name,,, updating the cwm version on an already partitioned instal.
Okay, thanks for clarifying that!
Didn't know it worked like that, I only use CLK.
Sent from my HD2 using xda premium
thanks for the information,but Isn't happened like I expect,I still cannot to turn the phone on,and still don't recognize USB,Battery is Full,
Everything i try:
Remove a battery for 1 night
Charge a battery with Charger for battery
Put the charge cable into phone for 1 day
try comb. with keys ( volume up/volume down/Power but.,,volume Down and power but.)but nothing happens.More idaes ??? , or maybe never will wake up this phone ???
more information for the problem
htc hd2 1024 mb with Android gingerbread 2.3,haspl v.3,MAGLDR113
Sd card 2 GB (class 3)
while I play games and watching youyube via wifi connection my charge cable was plugged in the phone,in about a 2,3 hours it freeze,i wait 1,2 minutes and after i try to power off the phone I remove the battery and pul back again and in this moment the phone never turn on.That is maybe everything I know if someone knows or give me a idea what to do,please tell me
I've seen this and similar a few times, when left on charge overnight, and upon waking the phone is totally gone. I've woken up to a fully hard reset phone myself, once, not dead but something weird happened.
Electrical surge, perhaps? Overheated circuits? Who knows.
Somehow the phone start,I have put on my router,and plug in USB all night,in the morning i remove a battery,remove a SDcard put back batery,plug usb and it go,I replace infromation from the card with onother sdcard,flash the phone. 10x for the help,maybe now everything is ok
marto9067 said:
more information for the problem
htc hd2 1024 mb with Android gingerbread 2.3,haspl v.3,MAGLDR113
Sd card 2 GB (class 3)
while I play games and watching youyube via wifi connection my charge cable was plugged in the phone,in about a 2,3 hours it freeze,i wait 1,2 minutes and after i try to power off the phone I remove the battery and pul back again and in this moment the phone never turn on.That is maybe everything I know if someone knows or give me a idea what to do,please tell me
Click to expand...
Click to collapse
I've same problem after similar conditions.
Mine is 512Mb HD2 running Andorid on SD
- while using in extreme conditions: very low network signal, hot ambience temperature, using GPS and downloading data throug 3G
- the screen freeze on image and not respond on touch neiter button
-after 2-3 minutes phone temperature became very hot and screen again on freeze
- removed battery (for power off button not responding)
- insert battery
- no power up, no green LED with AV adaptet, no USB recognized
I'll trying to charge battery but i don't have a table battery chager.
Could you please repeat me what you did, since I didn't get the first part, what did you put on your router (what kind of router please)?
I've tried using my phone with another HD2 phone's battery which is working (and which also started with my own battery?!) but my own phone wouldn't start at all with the other battery...
The battery wasn't fully charged, but did it have to be, if so how long should I charge the battery with the cut USB cable for it to be charged enough please?!
TIA
P.S. I've tried a voltmeter on my battery and it said 4.14V (should it be 4V exactly?) and should I even try the cut USB charge trick again (since I've tried another phone's working battery)?
marto9067 said:
Somehow the phone start,I have put on my router,and plug in USB all night,in the morning i remove a battery,remove a SDcard put back batery,plug usb and it go,I replace infromation from the card with onother sdcard,flash the phone. 10x for the help,maybe now everything is ok
Click to expand...
Click to collapse
dada.81 said:
Could you please repeat me what you did, since I didn't get the first part, what did you put on your router (what kind of router please)?
I've tried using my phone with another HD2 phone's battery which is working (and which also started with my own battery?!) but my own phone wouldn't start at all with the other battery...
The battery wasn't fully charged, but did it have to be, if so how long should I charge the battery with the cut USB cable for it to be charged enough please?!
TIA
P.S. I've tried a voltmeter on my battery and it said 4.14V (should it be 4V exactly?) and should I even try the cut USB charge trick again (since I've tried another phone's working battery)?
Click to expand...
Click to collapse
Ok if I understand you correctly you have tried your battery in a working HD2 and it worked. Then you tried the battery from the working HD2 in your device but your device still did not boot up. If this is correct I do not feel your battery is the problem, but still check the battery pins on your device to make sure none of them are not slightly bent and not making contact properly.
Also if you can provide more info on what you may have done to cause this or what happened when your device reached the state it is currently in. This info can help others and me help you better.
I have a similar problem.
The phone won't start, it gets to the white htc screen sometimes but quits within a fraction of a second.
This has been so since the first Android boot hung (I suspect I have not followed the steps accurately enough...). I have charged, decharged and recharged the battery using the suggested USB-cable technique, but this was of no aid so far, so it's not the battery. Pins and all's fine.
It's someone else's phone, too, so it would be rather unfortunate if I bricked it.
Are there any other common reasons for this behavior? Most tutorials rely on a PC connection, but as it does not recognize such a thing, that's a bit of a problem.
Finally the same problem here.
Battery status was about 70% and running smoothly (WinMO Custom Rom) since installed.Unlocked the Screen and tried to start programs.
The Icons were lightened up but nothing happened.Tried to softrestart...Nothing happened.
Removed and reinserted the Battery.
=> Not turning on.
-another fully charged Battery => nothing
-charging on Charger => nothing not even charging light
-plugged into (running) pc => nothing not even charging light
-5 hours in the fridge => nothing
-charging over night => nothing
Any hints ?
Thx for the goot work around here and greets from Germany !
Sebastian
PS If anyone got one to offer => contact me. Dont like those situations
Bad news!
Seems like your MB is gone...:crying:
Maybe one chance left for a JTAG attempt to a local service shop...
thats what i was afraid of
at least it happend only one hour after i made a backup
thx for the reply !