Hi All,
I have a problem with my HD2. I am not able to hear anything during call or my voice mails. But the loudspeaker is working fine. Also if I use head phones, I can hear fine.
Before you start jumping into the build and radios and etc etc, let me tell you this. I got this problem when I did not even know about flashing android on the HD2. But this problems goes away after 15-20 mins after restarting the phone. But this time it is not going from last 2 days, which is frustrating.
Anyone has any solution to my problem, please share it.
Thanks a lottt....
http://forum.xda-developers.com/showthread.php?t=858448
ClydeB1 said:
http://forum.xda-developers.com/showthread.php?t=858448
Click to expand...
Click to collapse
Hey Thanks for the advice. But it doesn't work. I had tried this method earlier. But still I gave it another shot. The problem is I do not have any sound at all, not low in call volume...
Ok, did not realise you had no sound. I'm wondering if it is not a hardware problem then. If you can hear via headphones and the rear speaker works, then it is probably the front speaker that is a problem. I'd reflash to winmo stock and take the device in for a warranty claim.
hello,
can i use this on my coredroid hd 1.5 release? i allready renamed the ''htcleo.acdb'' now the sound is louder but is not very clear,do you thing this will provide to me better sound quality?
Related
Hi there,
i'm stuck now with a very strange problem.
I was playing with the A2DP patch when i discovered that my prophet is making noise in the built in speaker when i'm receiveing or making calls.
After 2 hard resets (the Clean Data and the Camera/Comm buttons + reset methods), it's still the same. I can't use the phone as a phone!
Also same with headphones. It sounds like the volume is way too high. Almost unintelligible.
Only in Bluetooth it works correctly.
Any ideas?
It is a O2 XDA flashed with French QTEK S200 ROM, so of course waranty is gone
Help help help
Hi there.
Nobody had the same issue with his Prophet?
After some investigation, i came up with the idea that it was because i was using Wireless Stereo with an A2DP device, but it suddenly came back, and even with Bluetooth disables/devices deleted/unregistered from the phone, it's still the same.
I don't know what to do. I'm forced to use my Bluetooth headset to use my phone :?
I didn't try yet Hard Resetting my device, but the other day, when i wrote the previous post, it didn't help.
So, You, who are reading this, please give me some advices
I'm lost.
i have the problem in the other one, in the normal use the sound is sooooooo extrem loud. in the bluetooth mode works it perfekt.
nighty
Well, it depends how you see (hear) the issue.
I call this noise, but in fact it seems that the sound is pushed to the max. I can hardly understand the words people say to me through the built in speaker.
Maybe we have the same issue, but i call it "noise" and you say "extremely loud".
Do i understand well that you're living with this?
Did you also played with A2DP patch? Or is the origin of your issue different?
Personnally, i'd like to find a solution.
yes i played with A2DP patch and i wont life with this probelm.... i send mails to www.qtek.ch, www.swisscom.ch, www.daanguard.ch, www.teleservice.com and a lot of other Qtek supporters.....
in this moment i use only bluetooth for all calls. but this ist not really a final solution.
nighty
Good,
i don't feel alone now
If one of them answers you, please let us know on this thread.
Maybe there are also other people with same or similar issue that are too shy to say it here
They'll like also to know how to fix.
I can't believe we're just 2 with this issue :roll:
Nightly,
did you have an answer for all the emails you've sent?
I'm planning to flash an O2 ROM back to the XDA Neo and sent it to repair, but if you've found the solution, i'd be happy to read it before i go to Germany.
nighty said:
yes i played with A2DP patch and i wont life with this probelm.... i send mails to www.qtek.ch, www.swisscom.ch, www.daanguard.ch, www.teleservice.com and a lot of other Qtek supporters.....
in this moment i use only bluetooth for all calls. but this ist not really a final solution.
nighty
Click to expand...
Click to collapse
Hey, i was wondering did u ever find a solution for this problem as i have not 1 but 2 prophets with this problem thx
Hi, I cannot hear any sound during an out going call(O2 Xda Atom). No ring back, no voice after connect, tried earphones - no luck, tried the switch on the earphone jack - no luck, checked for software clashes, cold reboot, re-flash and couple of ROMs... the other party during a call hears hissing noise. In coming call is fine, both can hear well.
The speakers and mic are good. I can play music, videos, ringtone.. no problem. Also tried audio recording, no problems - the mic is fine. Any clue what is going on? Plz help.
Jole
Jole said:
Hi, I cannot hear any sound during an out going call(O2 Xda Atom). No ring back, no voice after connect, tried earphones - no luck, tried the switch on the earphone jack - no luck, checked for software clashes, cold reboot, re-flash and couple of ROMs... the other party during a call hears hissing noise. In coming call is fine, both can hear well.
The speakers and mic are good. I can play music, videos, ringtone.. no problem. Also tried audio recording, no problems - the mic is fine. Any clue what is going on? Plz help.
Jole
Click to expand...
Click to collapse
Basically you can flash back to original WM5.O to confirm if it is ROM problem. For your case, I strongly believe it is not a hardware problem
Thanks for the response Sono. But the phone was working fine with wm6, at least for an year. Now I've tried 6, 6.1 and 6.5. I dont have a WM5 ROM back up, will try to get one tomorrow.
Jole.
speaker supplier in the phil
hi mga kabayan..Do you have any info about the supplier of speaker for atom life here in the Philippines? coz both speaker of my atom were busted already. How much?..tnx
sonofwind2008 said:
Basically you can flash back to original WM5.O to confirm if it is ROM problem. For your case, I strongly believe it is not a hardware problem
Click to expand...
Click to collapse
Tried flashing the original WM5 too, but no fix. I used to format file sysytem and install radio on my Tornado. Is there something similiar for Atom? Can I update GSM manually? Any advice?
No ring back, no voice after connect, tried earphones
Click to expand...
Click to collapse
Okay theres a number of things you can try to help diagnose it. Do this all on a clean install of WM6 or 6.5.. Preferably on a ROM that hasnt had any reported issues.
1. The outgoing call gives the receiver static.. correct? is it to any number or just specific numbers?
2. Do you have a bluetooth headset around that you can try? If so then pair it up and see if it does the job, that will prove that its a hardware problem.
3. Try a different dialer or the stock dialer.
Thanks Aegishua for the response, I flashed back to a wm6 ROM that was working fine for over an year. This is what I observed:
1. Calls to two GSM and one land-line gave the same results. The phone is silent, the other party hears a loud hissing and a high pitch tone, not so loud, almost like feed back noise. No change when I mute/unmute, switch on/off spkr phone. when I select 'hold' the noise is replaced with a hold music from the network. In-call recording captures my voice thru the mic.
2. I could not try a BT headset, hope to get one tomorrow.
3. At least four different dialers tried incl original wm5 dialer, wizard dialer- retouched, Yota etc. Each of them returned the same results.
Please advise.
Ok, I got a BT headset, but the result is same as before. That is, out going call no audio at all, in coming calls ok. Does it mean the GSM module is bad? Is there a solution, other than replacing the entire ckt board?
Thanks, Jole.
bump..have you solved this kabayan? same problem encountered
atom life call problem fixed!
just got outgoing and incoming call working!
thanks to insomnia for sharing his procedure. i also want it to share for those who are experiencing same problem.
originally from this thread
insomia said:
Mga kabayan, im not sure if this will work for you.
i assume youre using globe sim card and i experienced it before when i first flashed my atom life (with official rom) to a cooked 6.5. (talagang my issue kc ang atom life s globe kaya fix nila s official upgrade nila.)
so i upgrade it 1st with an official upgade rom from O2 before i flash it to a cooked 6.5. a long procedure but worthy. Try nyo lng din. hope it will help.
btw, after testing all latest rom... i am still using and preffered our kabayan chef bajok's 23004 release. not much in latest interface but it is stable and free from any bugs.
Click to expand...
Click to collapse
* just download the released official atom life rom upgrade.
* flash your beloved pda
* flash it with your favorite cooked rom!
Jole said:
Hi, I cannot hear any sound during an out going call(O2 Xda Atom). No ring back, no voice after connect, tried earphones - no luck, tried the switch on the earphone jack - no luck, checked for software clashes, cold reboot, re-flash and couple of ROMs... the other party during a call hears hissing noise. In coming call is fine, both can hear well.
The speakers and mic are good. I can play music, videos, ringtone.. no problem. Also tried audio recording, no problems - the mic is fine. Any clue what is going on? Plz help.
Jole
Click to expand...
Click to collapse
try open a radio fm....
if you hear sound....the problem @earphone connector...
Hi everyone, I hope one of you can help me out.
I bought a vogue on eBay to play with the android OS. I loved android, but I had an issue... When I called someone they couldn't hear me but I could hear them. Also none of the sound notifications were working... no incoming calls, no music files... it looked like the software was working, but I couldn't hear anything.
The sound was working fine before I converted to android (directly from the phone not the SD card), so I flashed to a WM rom... still the same issue. I can hear everything perfectly fine when I call my voice mail, but people can't hear me when I call them, and none of my sound files make any noise even though it looks like media player is playing them properly.
I flashed to the Sprint stock rom for the Vogue, and still the same issue...
Can someone please help me? I have no idea what to do.
^_^ said:
Hi everyone, I hope one of you can help me out.
I bought a vogue on eBay to play with the android OS. I loved android, but I had an issue... When I called someone they couldn't hear me but I could hear them. Also none of the sound notifications were working... no incoming calls, no music files... it looked like the software was working, but I couldn't hear anything.
The sound was working fine before I converted to android (directly from the phone not the SD card), so I flashed to a WM rom... still the same issue. I can hear everything perfectly fine when I call my voice mail, but people can't hear me when I call them, and none of my sound files make any noise even though it looks like media player is playing them properly.
I flashed to the Sprint stock rom for the Vogue, and still the same issue...
Can someone please help me? I have no idea what to do.
Click to expand...
Click to collapse
Long shot, but did you check the device before flashing anything? Was it working when you got it off ebay?
Did you do a hard reset after flashing WM?
Yes, it was working when I bought it. The receiver is now working (people can hear me when i make a phone call), but the speaker on the back, the one used for speakerphone, is still not working.
I've done a hard reset, nothing changed. I'm going to take it into a repair store and see if it's a hardware issue... I have no idea why it would be though. All I did was mess with the software.
^_^ said:
Yes, it was working when I bought it. The receiver is now working (people can hear me when i make a phone call), but the speaker on the back, the one used for speakerphone, is still not working.
I've done a hard reset, nothing changed. I'm going to take it into a repair store and see if it's a hardware issue... I have no idea why it would be though. All I did was mess with the software.
Click to expand...
Click to collapse
It could be that flashing to Android messed up something in the speaker... again, another long shot!
Hi All.. I posted this in Energy thread in deveopment but I think it is more suited to be answered here... anyone please help before my friend defects back to Apple!
adamelphick said:
OK Strange one here - hope someone can help!
I flashed older cookie on to HD2 for a friend and took phone to her in Malaysia - all seemed well but phone was freezing apparently so her brother went to HTC asia site and downloaded a ROM for it! GRRRR
Anyway it was a T-Mobile rom or something with a '51' radio. Since then when she makes a call she can not hear the other person through the earpiece (but can through the headset!) , but CAN hear a busy tone if the person is already on a call when she calls!
So I flashed latest Cookie Dinik style back on and replaced the Radio with 2.07.50.** and still the same!
I don't understand how the earpiece can make the busy sound but not hear the voice, yet headphone works?! I have connected remotely and used MyMobiler to see screen of HD2 and looked for anything that may be causing it but all seems fine.
If anyone has any ideas please help as she is about to go back to an iPhone after just moving to this HD2 on my say so!
Click to expand...
Click to collapse
hmm thats an odd issue and I would be suprised if anyone else has encountered it :S
are you positive its the ear piece speaker thats making the busy sound and not the loudspeaker on the back of the device?
also have you tried swapping between loudspeaker and normal handset mode? does the call work in loudspeaker mode but not normal speaker mode?
Xp3RiM3nT said:
hmm thats an odd issue and I would be suprised if anyone else has encountered it :S
are you positive its the ear piece speaker thats making the busy sound and not the loudspeaker on the back of the device?
also have you tried swapping between loudspeaker and normal handset mode? does the call work in loudspeaker mode but not normal speaker mode?
Click to expand...
Click to collapse
Good idea with the loudspeaker mode - will ask her to check that. Can't see how a rom flash could cause it - hope it's not faulty hardware!
I had a similar problem with my HD2: I wasn't able to hear my counterpart. I have tried several radio/ROM combinations with no luck. Looking at the test results I guessed it was a sporadic hardware issue of the earpiece. Sent the phone off to service, they confirmed the problem, replaced the earpiece and shipped it back, all free. Great service!
Of course, I had to restore to factory settings beforehand, including the original SPL, radio and ROM. If the phone is still under warranty I would suggest you try a hardware repair.
hi there
i have a Hermes, exactly the T-Mobile version..
anyway it worked fine till one day i got no sound at all, no mp3 no notifications, nothing....
except the boot up sound... checked the forums, seems it's a common problem, and i figured that the rear speaker works (since the boot up sound comes from it), the speaker cable is connected so i have no clue... if it would be broken, than the boot-up sound wouldn't come at all from the rear speaker, riight?
changed like 5-6 ROMs so far, from 6 to 6.5, no changes with sound...
any clue guys what to do?
I'd need to solve this asap...
thx for any solution
can please someone at least confirm me if my rear speaker is dead or not?
cos i hear the boot up sound from it but no other sounds...
please ,its urgent, thx
Well, the first thing that i would consider doing is backup my important data and do a hard reset....why don't you try that too....?
okay
got from ebay a new speaker... changed it and it doesnt work either...
hard reset and changing the ROM (6-7 of them) didn't help...
at beginning the sound could be heard at boot only while playing music, ringing and that stuff was mute... after 2 days the sound at boot disappeared too...
so, does anyone have a solution? when i plug the microUSB to 3.5mm adapter i can hear the sound on my earphones, but there is no sound when played normally on the ppc itself...
can anyone help me to solve this? where could be the problem?
thanks
okay...
going mad really... now i flashed an original AT&T US rom (although i have a tmobile EU) and guess what.... i hear the sound back again, but only at boot up... other sounds in winmo (ring, mp3, music, programs) are dead... can't hear anything although the volume is set at max...
so... i assume this can't be a hardware issue..
before this ATT i changed like 6 more different roms and all with same problems... now i have sound only at bootup... does anyone know where is the problem and a possible solution?
thanks
cmon guys... don't tell me no one has no idea what to do.....
i've been flashing and reflashing the roms but so far i can get only the boot up sound... any other sound is not available.. why? how to repair it?
thx
it's funny to see you can ask sometimes questions no one knows to answer
you've tried it by using the head set...?
whether the results were the same as well (no sound)..?
when using a headset (extUSB) there is sound and everything is normal...
Papcina said:
when using a headset (extUSB) there is sound and everything is normal...
Click to expand...
Click to collapse
you'd better check the speakers on your device , may be the connecting cable is damaged and if necessary you replace ....
I have the same problem here!!!Have you fixed that??Can you suggest me something, please???
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
nonsuchpro said:
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
Click to expand...
Click to collapse
you see in the WIKI, because there is described several ways to increase the BT A2DP sound quality and sound notification by Changing the Registry