Related
Ok, I have been thrown for a loop and need some help....
I had a Sprint Hero Rooted on 2.1 the .5 sprint update
Tried to run the new update but it kept getting corrupt.
Did a Nandroid backup
So I reverted back to the .5 RUU
Then it wanted me to update to the old .6 update, so I did
Hoping then I would upgrade to the new .6 but it was not able to find a new update?
Wanted to restore my nandroid update.
When I try to boot into the recovery mode I get a picture of a phone with a red Explanation mark in a triangle.
There is a bunch of people on the net that say they have seen or gotten it, but no one says how to get rid of it? So I can not get in to recovery mode at all.
Tried the home+power boot
Tried the volume down + power then home
always ends in the same screen with no recovery.
Tried multiple times to install the .5 RUU
Reset phone
never can get back there to the recovery?
Phone will boot fine into 2.1 and run fine..
Anyone have any ideas, I have tried everything I can think of.
Thanks
Did u try placing the recovery on ur SD card and flashing it threw terminal on ur phone
Root-Hack-Mod-Always™
You lost root, as far as I remember the .6 update was to block the corrent rooting efforts that you see around here, thats why the rooting instruction say to go back to the .5 ruu.
The corrupted update your getting is just sprints server being bogged down.
What you need todo is go back and re-root your phone. Dont worry about the update untill it gets released into one of the current roms or until you here that its safe todo without losing root.
ASimmons said:
You lost root, as far as I remember the .6 update was to block the corrent rooting efforts that you see around here, thats why the rooting instruction say to go back to the .5 ruu.
The corrupted update your getting is just sprints server being bogged down.
What you need todo is go back and re-root your phone. Dont worry about the update untill it gets released into one of the current roms or until you here that its safe todo without losing root.
Click to expand...
Click to collapse
Thanks, I can't believe I missed that! I had never tried a backup before root, so I did not think about that. Now I know and hopefully this will help someone that googles this issue, as there is never a clear answer until yours.
Thanks again...
So in closing of this thread:
if you are trying to get into recovery and see "Phone with Explanation mark" image.
it's because your phone is not rooted
So root your phone and it's all good
Also If you ever run an ruu on your phone you can kiss your root good bye no matter what version you do. but if you have nand backups you can reroot your phone and then restore one of your backups since there stored on your sdcard.
copc said:
So in closing of this thread:
if you are trying to get into recovery and see "Phone with Explanation mark" image.
it's because your phone is not rooted
So root your phone and it's all good
Click to expand...
Click to collapse
Correction: If you see this symbol, it means you don't have a custom recovery image in the phone. You can actually be rooted and still get that symbol if you haven't yet flashed a custom recovery after you rooted. You need to have a custom recovery (that requires root) to avoid getting that symbol when you try to boot into recovery.
Most rooting methods on here automatically include flashing a custom recovery as one of the steps, so this isn't really a big issue....but I just wanted to clarify the specifics of this for anyone else who reads.
copc said:
So in closing of this thread:
if you are trying to get into recovery and see "Phone with Explanation mark" image.
it's because your phone is not rooted
So root your phone and it's all good
Click to expand...
Click to collapse
I am running a rooted 2.1 and get this symbol , i installed rom manager and it asked me to install flash clockworkmod recovery and it booted into recovery straight away allowing me to partition my sd card, but if i want to access this mode i have to run flash clockworkmod recovery everytime or it will not work
Any idea why that is anyone?
brisuth said:
I am running a rooted 2.1 and get this symbol , i installed rom manager and it asked me to install flash clockworkmod recovery and it booted into recovery straight away allowing me to partition my sd card, but if i want to access this mode i have to run flash clockworkmod recovery everytime or it will not work
Any idea why that is anyone?
Click to expand...
Click to collapse
Nope once its on there you should be able to hold the home key while rebooting to get into recovery.
Sent from my HERO200 using XDA App
ASimmons said:
Nope once its on there you should be able to hold the home key while rebooting to get into recovery.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
only way can get there is through flash clockworkmod recovery then select either reboot in recovery mode or turn of handset and restart with home and power button, what ever flash clockworkmod recovery does to make it work as soon as it has been used i am guessing it is deleted or modified,
i have tried running it then checking files on sd card but cant see anything different
brisuth said:
only way can get there is through flash clockworkmod recovery then select either reboot in recovery mode or turn of handset and restart with home and power button, what ever flash clockworkmod recovery does to make it work as soon as it has been used i am guessing it is deleted or modified,
i have tried running it then checking files on sd card but cant see anything different
Click to expand...
Click to collapse
The recovery console isn't on your SD card, it's flashed to a partition inside your phone's memory. So you won't see anything different on your card.
And if you can boot into recovery by "restart with home and power button" like you say, then it's working as it should -- that's how you get into recovery.
chromiumleaf said:
The recovery console isn't on your SD card, it's flashed to a partition inside your phone's memory. So you won't see anything different on your card.
And if you can boot into recovery by "restart with home and power button" like you say, then it's working as it should -- that's how you get into recovery.
Click to expand...
Click to collapse
just had a friendly member point out what i was starting to suspect the problem lies with the custom recovery being flashed back to stock on every restart, the shell command here
/system/etc/install-recovery.sh this stops any custom recovery on reboot. any advice on what tools to edit or remove
Delete that file when you get root I guess. Our as soon as you reboot into clockwork recovery, flash a rom. Use nfinitefx if you want a stock one
Sent from my HERO200 using XDA App
I always had root that was where the confusion was, what i did not know was the script was running with every boot of the handset and removing the recovery that was there as it was identified as unofficial and exclamation mark could be down to me using many methods to flash i may have renamed original recovery so when it goes to exclamation it is because cant find original recovery whether handset is rooted or not.
danaff37 said:
Delete that file when you get root I guess. Our as soon as you reboot into clockwork recovery, flash a rom. Use nfinitefx if you want a stock one
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
would that have worked? i thought about it many many times but as i had never flashed before was unsure how many times phone would reset and if it did before it was installed could i lose my recovery.
on the plus side the 2 months i have spent trying to solve this i have a much broader view of the workings of my handset and without the many members like yourself who take the time to reply and try to help others i would have given up a long time ago.
Brian
I'm sure if you deleted that script a custom recovery would have stuck
Sent from my HERO200 using XDA App
I tried to use SuperOneClick to root my phone and it seemed to work. The program came back saying I successfully rooted my phone.
I then went to ClockworkMod to install cyanogen and clicked on the appropriate boxes to begin the download process for cyanogen 6.0 stable mod and ran it.
My phone rebooted and started to run some scripts.
Now, the phone just reboots to the green mytouch screen and continues to loop like that and I have no idea what to do.
I can get into fastboot on the mt3g and when I do, my pc makes the sound that states that the phone is connected but when I try to get into the mytouch, using adb, my pc cant access it but when I plug up my G2, I can see the serial number and such showing that it is connected.
I tried to follow the fastboot driver installation page but it didn't seem to work.
Bottom line is I would really enjoy a functional MT3G in either the regular form or cyanogen (which is why im in this predicament now )
For the the record,
I was running 1.6 but got the OTA update for 2.2 before I ended up blowing up my phone.
Thanks for reading this and any aid would be greatly appreciated.
UPDATED:
I found something called SAPPIMG.NBH that allowed me load Android 1.5 onto my phone. I now am back to a functioning device but still, I am super stuck on trying to get cyanogen onto my device. Any helpful hints? From what you read above, did I miss something?
Thanks again.
... Sadness... I have been bashing my face against this mt3g and haven't been able to get cyanogenmod on this phone for the life of me. I have tried all of the builds from 5.08 up to RC1 of 6.10 and I just get the infinite loop at the cyanogen boot up screen. I even tried to flash 2.23.XXXX radio to see if it gets past the boot loop and it does not. Anybody have any insights into my issue?
Thanks,
You must go into recovery mode(boot up by holding down home + power). That will get you to Clockworkmod recovery(I am assuming since you said you downloaded using Clockwork app). From there you need to wipe cache, and anything else you can wipe. Then try installing Cyanogenmod after that. Without wiping the there is not enough space to install and it causes a bootloop.
I'm in the same boat, I'm stuck in a boot loop and I cannot get any ROM to fully load in. I'm using clockwork recovery Radio 2.22 32B.
I tried wiping everything but that still doesnt seem to work. I noticed when I try wiping Davlik cache I dont see any message on the bottom. I thought it would normally give me some sort of message stating that it is wiping davlik or something so maybe it isnt actually wiping it?
Is there some other way to make sure davlik is wiped? Or something else I can do. I just want the phone to boot up at this point. I can get into recovery but thats it.
I know I shouldve done a backup but dumb me was such in a rush I completely forgot, I know im a idiot...
Het I found that same .img file and also reverted back to 1.5 then just went up to 2.2 not sure what was wrong but Rom I put on just went into a boot loop. Maybe it was clockwork recovery.
Sent from my ADR6300 using XDA App
the padawan becomes the master... Sort of...
The problem is that you cannot go directly to 2.2 from 1.5. You have to do the incremental upgrades that take you from 1.5 to 1.6 then 1.6 to 2.2
Search function is down but I did go through a few pages of threads looking for what was going on and no luck but I apologize if this has been solved somewhere else.
First off I would rate my rooting know-how as beginner to intermediate. I've jailbroken/unlocked multiple iPhones awhile back and have rooted/flashed roms on a cliq, mts, my3g, and this mt4g before.
I recently returned my current mt4g back to stock rom and unrooted. I do not think I turned s back on but I should have double checked before.
I currently have root and flashed clockwork and am trying to flash CM7 (I had ran it before on this phone as well). I have an issue right now where I cannot get into clockwork recovery as it will just sit at the mytouch logo forever and if I try and volume up and power into recovery all I get is 3 vibrations and a flashing amber light.
I can boot into the stock (but rooted) rom.
Any ideas? I feel like my recovery is broken or something but this goes beyond what I know. Any help would be great and any information you need I'll be happy to provide.
myTouch 4G, rooted, s (probably) off, stock rom, clockwork says i'm on 3.0.2.4
After reading that, I'm not fully convinced you actually have root and S-OFF. If you're sure you do, download ROM Manager from the Market and use that to install a fresh copy of CWM recovery. Also make sure the "fast boot" option is turned off somewhere under Settings. At that point, there should be nothing preventing you from getting into recovery if you have perm root.
I've got ROM Manager and it has SU permissions and I have the latest recovery flashed but I am still stuck on mytouch logo or the 3 vibrations/amber light when I try to get to recovery. If I reboot there is still no problem getting SU in terminal emulator or ROM manager or anything.
Fast boot is off as well. Thanks for the help so far.
Any ideas?
I don't often boot into recovery manually since most custom ROMs have an enhanced reboot menu with a recovery option, but if memory serves, I believe the key press combination is actually Power + Volume Down, not up like you mentioned in your OP. Give that a try.
Man I am really crazy. Here I am a tmo rep and also a novice modder and I'm hitting power + volume up.
Worked like a charm.. Now just to figure out why clockwork is sitting at the mytouch screen when trying to install CM7.
Thanks for the fresh set of eyes!
breakaway87 said:
Worked like a charm.. Now just to figure out why clockwork is sitting at the mytouch screen when trying to install CM7.
Click to expand...
Click to collapse
After flashing CM7, the phone hangs at the myTouch screen when attempting the first boot?
From ROM Manager if I try to flash CM7 from there it goes to the mytouch screen and hangs before anything else happens.
breakaway87 said:
From ROM Manager if I try to flash CM7 from there it goes to the mytouch screen and hangs before anything else happens.
Click to expand...
Click to collapse
What if you select the "boot into recovery" option in ROM Manager? Does the phone reboot into CWM recovery? (you should see the main CWM menu in orange text)
Boot into recovery takes me to MT4G logo and hangs.
breakaway87 said:
Boot into recovery takes me to MT4G logo and hangs.
Click to expand...
Click to collapse
So you don't have a good installation of CWM. Open ROM Manager again and re-flash a fresh recovery. I think there's an option to wipe your existing recovery beforehand, so if you see that, select it. You need to get a working recovery image before you can do much else.
Deleted current recovery and I confirm my model again and it takes a total of 5 seconds. Trying to reboot into recovery again after and I still hang at MT4G.
I hate it when you know something you need to do but you've been working on it so long you can't come up with new ideas.
Thanks again for the help.
Sorry multipost since it didn't register on my computer the first time for some reason
Yeah sorry man, I've never heard of a situation where CWM stubbornly refuses to install. If you have the engineering bootloader, you could manually flash it that way, but that's my only other idea.
Alright well thanks for all the help man, I'll dig around and pick up tomorrow.
I ended up looking for the recovery myself on the SD card and deleted it and then it flashed no problem. Thanks again for the help
breakaway87 said:
I ended up looking for the recovery myself on the SD card and deleted it and then it flashed no problem. Thanks again for the help
Click to expand...
Click to collapse
Sure, glad you figured it out.
Currently Running Miui 2.7.1.3 i believe the numbers are, whichever the latest version of the rom is. It installed no problem, was merely updating to try to fix theme issues from 2.6, and here is where the problem begins:
So i was browsing my phone and realised that i didn't have superuser on there, wondering why because usually every rom i ever ran had it automatically on there, installed it off of another site, the elite version, and from there everything got screwed up, i don't know what happened or why it started but, i could no longer run busybox, TBU, setcpu, nothing that requires root, due to the fact that superuser was denying root. I had no clue why, i've been reading threads for hours similar to "Superuser denying root" and such, and to no avail, the problem is still there, i have set superuser to both prompt and allow when asking for root, and neither worked, so i figured a clean fresh reflash of MIUI would help, however even after wiping and a clean install, root does not work, ive read some articles describing to just unroot and root again however it's been so long since ive rooted a phone, can anyone direct me to the best way to do this without having to do an ODIN and set up my phone allover again, keep in mind that it is still S-Off. What am i doing wrong?
I also have tried to clear data for superuser, as well as install multiple versions, neither have worked.
Any help is greatly appreciated!
ROBLEM SOLVED:
To those with similar problems to this who have ruled out other reasons, described in this thread, abandon Superuser and download SuperSU instead, it fixed my problem.
Odin is for Samsung Phones and if u lost root redownload the rom or Google super user and download the binaries and just flash them.
Sent from my Dark Unicorn Resurrected v.2.5 using Tapatalk 2
I tried all that, anyway im in the middle of a stock restore right now and trying to reroot but stuck at the damn visionary step >.<
I am now stuck with S-on and back in a stock rom, downgraded, and visionary still doesnt work, i give up
Try gfree method
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
You're very likely doing so much wrong..
MIUI has an option in settings - "allow superuser privileges". You didn't turn it on, and it's off by default. That's it. And from there you went to a whole new level of going the wrong way.
No amount of restoring to stock and re-rooting can help you. Root privileges aren't phone-specific, they're ROM-specific, and relevant only for the ROM currently on the phone. Reflash the ROM with something else - and existence or inexistence of root will depend on this "something else". Thus I fail to understand, what were you looking for when restoring to stock. It was as irrelevant as could possibly be.
Jack_R1 said:
You're very likely doing so much wrong..
MIUI has an option in settings - "allow superuser privileges". You didn't turn it on, and it's off by default. That's it. And from there you went to a whole new level of going the wrong way.
No amount of restoring to stock and re-rooting can help you. Root privileges aren't phone-specific, they're ROM-specific, and relevant only for the ROM currently on the phone. Reflash the ROM with something else - and existence or inexistence of root will depend on this "something else". Thus I fail to understand, what were you looking for when restoring to stock. It was as irrelevant as could possibly be.
Click to expand...
Click to collapse
I believe you got two troubleshootings steps backwards.
After you have searched and exhausted every troubleshooting step you found (which obviously wasn't thorough), you should have posted in the MIUI thread about the problem. They might have scolded you a little before answering, but you would have gotten your answer.
Flashing back to stock is ALWAYS your last resort. It should only be done after scouring the web for answers, then asking for the answer, and when there is no other alternative - FroYo PD15IMG.zip.
Jack is blunt, but as he's as right as always.
I'm not one to deny mistakes, that sure was stupid of me not to look, i guess i just thought there were deeper problems than just the rom having it turned off, anyway i'm doing the downgrade now and it should work, thank you for the help its appreciated
Jack_R1 said:
You're very likely doing so much wrong..
MIUI has an option in settings - "allow superuser privileges". You didn't turn it on, and it's off by default. That's it. And from there you went to a whole new level of going the wrong way.
No amount of restoring to stock and re-rooting can help you. Root privileges aren't phone-specific, they're ROM-specific, and relevant only for the ROM currently on the phone. Reflash the ROM with something else - and existence or inexistence of root will depend on this "something else". Thus I fail to understand, what were you looking for when restoring to stock. It was as irrelevant as could possibly be.
Click to expand...
Click to collapse
Could you point me to this "allow superuser privileges"? I have restored with recovery and have yet to find such a setting.
If you are referring to the permission guard, it allows everything, and there is no setting to simply turn it on
No, not this one. It's been some time since I sold my Nexus One, which was running MIUI back at the time, but I understand that in the newer MIUI there is an app or setting, called LBC guard, which controls both Superuser access and app permissions. Try looking it up.
P.S. I remember CM team member post, saying that the newer CM9 also come with root privileges turned off by default, because they decided it's a safer way.
Right, and the Permission Guard is run by LBC guard, there is no way to set anything different from what i have, i believe its a problem with the busybox binaries and superuser binaries, i'm trying to use this SuperSU instead of superuser to see if that will work. If i remember correctly before all this happened i may have hit uninstall busybox by accident and that may be why its not working, could be that ive never had busybox working and haven't been able to install it due to the SU problem
EDIT: Yes i have solved it now, SuperSU actually makes the prompts for superuser come up now, im using it instead of superuser entirely, must be deeper problems with original superuser
If you had SuperSU installed on the system and additionally installed the regular Superuser, or the other way around - these two are incompatible on binaries AFAIK, and mixing the applications without cleaning up the build and using the correct binary could cause what you were experiencing.
Yes your probably correct only i had two separate versions of superuser that didnt overwrite and that must be where the binaries got messed up
The 1st thing I usually do when I install a new rom, is install SuperSU, update the binaries then I use Titanium to uninstall Superuser.
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Drakona.cookie said:
Currently Running Miui 2.7.1.3 i believe the numbers are, whichever the latest version of the rom is. It installed no problem, was merely updating to try to fix theme issues from 2.6, and here is where the problem begins:
So i was browsing my phone and realised that i didn't have superuser on there, wondering why because usually every rom i ever ran had it automatically on there, installed it off of another site, the elite version, and from there everything got screwed up, i don't know what happened or why it started but, i could no longer run busybox, TBU, setcpu, nothing that requires root, due to the fact that superuser was denying root. I had no clue why, i've been reading threads for hours similar to "Superuser denying root" and such, and to no avail, the problem is still there, i have set superuser to both prompt and allow when asking for root, and neither worked, so i figured a clean fresh reflash of MIUI would help, however even after wiping and a clean install, root does not work, ive read some articles describing to just unroot and root again however it's been so long since ive rooted a phone, can anyone direct me to the best way to do this without having to do an ODIN and set up my phone allover again, keep in mind that it is still S-Off. What am i doing wrong?
I also have tried to clear data for superuser, as well as install multiple versions, neither have worked.
Any help is greatly appreciated!
ROBLEM SOLVED:
To those with similar problems to this who have ruled out other reasons, described in this thread, abandon Superuser and download SuperSU instead, it fixed my problem.
Click to expand...
Click to collapse
Anyone else with this problem go in the permissions app and enable root as miui uses its own root for security reasons.
Sent from my T-Mobile MyTouch 4g using xda premium
MIUI uses a customized superuser app. Use it and follow the instructions. Cnote ports the ROM. He knows what he's talking about.
Hello, I am a newbie and looking for a miracle. I am going to apologize for the length of this message in advance. Couple days ago I perm rooted the HTC Glacier Mytouch 4g using the instructions at //wiki.cyanogenmod.org/w/Install_CM_for_glacier . As instructed, I downgraded the software to 1.17.531.2 and then perm rooted with S-Off on the device. Then, I installed the cyanogenMod 7.2.0-glacier (stable version) with the google apps. Everything worked great and was happy.
Right after I installed AdFree from Googleplay, I had issues but problem may not be caused by this app. Googleplay gave me a message of an “error no connection”. I got a message that the “ADWLauncher failed to launch” over and over again which prevented me from doing anything else. I was able to reboot the phone in between the notifications of the ADWLauncher failure. When I was back up and running, I got the same message of Googleplay “error no connection” and ADW failure very quick after start up. I pulled the battery and did a hard power up (volume down plus power button at same time). This is when things got worse. The Hboot starts up and wants to update, which I did but then I could not choose recovery mode to install a backup. If I choose not to update Hboot, then I only have the option to restart the phone. I can see on top of the screen “Glacier PVT SHIP S-OFF” .
Wait – things get worse. I am no longer running the cyanogenmod ROM but am back to the downgraded ROM 1.17.531.2. I still can’t download from googleplay because I get the message “Error no connection”, even though I am running on the old ROM. I can’t download apps from the phone, but I can push apps to phone from my googleplay account. I did push the ROM Manager app to the phone. When I start the ROM Manager, I get the message “You must root phone for ROM to function. Superuser was not found at “/system/bin/su” or “/system/xbin/su”.
I tried to start the recovery through adb using “adb reboot recovery”, but I get a power off symbol (a red circle) and phone freezes. I need to pull the battery to reboot.
Again sorry for the length. I am hoping for a miracle. Since I can’t do anything in the hard power up mode, I need to find a way to fix through adb or fastboot. Does anyone know how to get the Superuser installed through adb or fastboot? Is there a way to flash another custom ROM that has a superuser installed through adb or fastboot?
BTW. Gmail works fine.
thanks
Droid-2 said:
Hello, I am a newbie and looking for a miracle. I am going to apologize for the length of this message in advance. Couple days ago I perm rooted the HTC Glacier Mytouch 4g using the instructions at //wiki.cyanogenmod.org/w/Install_CM_for_glacier . As instructed, I downgraded the software to 1.17.531.2 and then perm rooted with S-Off on the device. Then, I installed the cyanogenMod 7.2.0-glacier (stable version) with the google apps. Everything worked great and was happy.
Right after I installed AdFree from Googleplay, I had issues but problem may not be caused by this app. Googleplay gave me a message of an “error no connection”. I got a message that the “ADWLauncher failed to launch” over and over again which prevented me from doing anything else. I was able to reboot the phone in between the notifications of the ADWLauncher failure. When I was back up and running, I got the same message of Googleplay “error no connection” and ADW failure very quick after start up. I pulled the battery and did a hard power up (volume down plus power button at same time). This is when things got worse. The Hboot starts up and wants to update, which I did but then I could not choose recovery mode to install a backup. If I choose not to update Hboot, then I only have the option to restart the phone. I can see on top of the screen “Glacier PVT SHIP S-OFF” .
Wait – things get worse. I am no longer running the cyanogenmod ROM but am back to the downgraded ROM 1.17.531.2. I still can’t download from googleplay because I get the message “Error no connection”, even though I am running on the old ROM. I can’t download apps from the phone, but I can push apps to phone from my googleplay account. I did push the ROM Manager app to the phone. When I start the ROM Manager, I get the message “You must root phone for ROM to function. Superuser was not found at “/system/bin/su” or “/system/xbin/su”.
I tried to start the recovery through adb using “adb reboot recovery”, but I get a power off symbol (a red circle) and phone freezes. I need to pull the battery to reboot.
Again sorry for the length. I am hoping for a miracle. Since I can’t do anything in the hard power up mode, I need to find a way to fix through adb or fastboot. Does anyone know how to get the Superuser installed through adb or fastboot? Is there a way to flash another custom ROM that has a superuser installed through adb or fastboot?
BTW. Gmail works fine.
thanks
Click to expand...
Click to collapse
I would download a recovery image and use fastboot to install it. Maybe something is wrong with your recovery.
fastboot flash recovery recoveryname.img
Then wipe system, do a factory reset, and wipe dalvik-cache before flashing a ROM. Also, re-download your ROM.
estallings15 said:
I would download a recovery image and use fastboot to install it. Maybe something is wrong with your recovery.
fastboot flash recovery recoveryname.img
Then wipe system, do a factory reset, and wipe dalvik-cache before flashing a ROM. Also, re-download your ROM.
Click to expand...
Click to collapse
Thanks - I will need to try this later
Ok, I'm new at this, here's what I've got, hopefully someone can shed some light:
-My RAZR M is fully encrypted
-It is successfully rooted
-I have installed Rom Manager with CWM 6 as the custom recovery
-I want to make a NANDROID backup (to eventually install Carbon), but whenever I try to reboot into the backup/recovery mode, it won't, it goes to what I think is the ADB screen? Not sure tho, this screen says "Connect data USB." Then, when I do, it just changes state and says USB connected, nothing else happens. Then I just reboot the phone normally and everything still works.
So after googling and researching a lot, I'm assuming since my phone is encrypted it won't access the CWM because it never asks me for my password to decrypt the internal storage. Ok cool, but here's my question now tho; if I perform a Factory Reset from the settings menu, will it actually do the reset and reinstall itself since I have CWM installed??
Thanks for any help.
Anyone got any ideas??
Is your bootloader unlocked?
Sent from my XT907 using xda app-developers app
Hmm. Is this screen where it says "Device is LOCKED" mean that my bootloader is locked? Btw, this is the screen that I referred to in my first post. It comes up whenever I try to select "Recovery"
Your bootloader is locked and on that version it can not be unlocked... So... unfortunately you can not install a custom recovery... Well you can use safestrap but the ROM selection is very limited...
Sent from my XT907 using xda app-developers app
So you say I cannot install a custom recovery, do you mean a different ROM that I would "recover" to install it? Or do you mean ClockworkMod (and its various counterparts)? Because in the ROM Manager app, it says I have CWM 6.0.4.4 as my "current recovery" (see attached screenshot)
Please forgive me if this is a dumb question lol but like I said, I'm new at this whole thing
It does say that huh unsure as to why... i do have a locked M around here somewhere ill see if it does the same thing to it...When I say custom recovery I do refer to cmw n twrp... With a locked bootloader you can not install those... we have for safestrap as a recovery for locked bootloaders it's been a year since I used it but I believe you can make backups on it... I would just sit tight and.wait on kit kat it shouldn't be to much longer... till then just freeze all the bloat and use xpossed to your liking... When kk comes out I'm sure development will pick up for locked bootloaders again..anyone else with more experience care to provide more in depth assistance..
Sent from my XT907 using xda app-developers app
So any further advice on what I can or can't do?
I would like to perform a factory reset on my device to get rid of this stupid encryption (it slows everything down), but with CWM installed (supposedly?), can I still do a factory reset? I guess what I'm trying to get at is what does the factory reset option use to re-flash everything from? The recovery partition where CWM is now supposedly installed? Will that affect the factory reset?
I hope this makes sense, I don't want to brick my phone...
Alrighty, for anyone interested:
I never tried the factory reset. What I did do is try the OTA KitKat update just like 2 hours ago. That was a mistake; upon downloading and automatically rebooting to start the upgrade, my phone would not reboot, it got stuck at the AP Fastboot screen with the error code 0x56 (see attached picture).
So, I powered off and powered on my phone, at which point it powered up normally, until after about 2 minutes on the home screen, it automatically rebooted itself (to presumably "continue" trying to install the OTA). Then it got stuck again on the AP Fastboot screen. This continued over and over and I soon realized I soft bricked my phone.
Did some further research, found the House of Moto program (http://www.droidrzr.com/index.php/topic/28162-house-of-moto-22/) which saved my life. If anyone is having any issues similar to the situation I was having, or just issues with the KitKat OTA, this House of Moto program will restore your phone to completely stock. Just follow the instructions on that web page exactly. Kudos to the dude who developed that.