Related
Hello and sorry for my bad english.
I was using an HTC magic 32B before getting my nexus one.
Recently I decided to give the magic to my girlfriend to remplace her old nokia.
My magic was on custom rom (Super D 1.8) but, when I want to do a hard reset, the phone just reboot.
So I tried to go to the recovery (amon ra custom recovery) to wipe or change the rom to a most recent.
And, instead of having the recovery i have a black screen, juste have to reboot the by pulling out the battery.
Also, when the phone boot i've first the "SFR" logo and then, instead of the bootimage i've only an black screen, juste the time of the bootimage, after that, i juste have to presse the menu button to wake up the device.
I don't understand what it happens bescause before getting my N1 it was working fine...
Juste see on a video i've done, a part of second before pin code asking, there is the "android" displaying...
I can't post the video cause i'm new membre
I hope someone here avec an answer !
Thanks to all the XDA comunity
gniouki said:
Hello and sorry for my bad english.
I was using an HTC magic 32B before getting my nexus one.
Recently I decided to give the magic to my girlfriend to remplace her old nokia.
My magic was on custom rom (Super D 1.8) but, when I want to do a hard reset, the phone just reboot.
So I tried to go to the recovery (amon ra custom recovery) to wipe or change the rom to a most recent.
And, instead of having the recovery i have a black screen, juste have to reboot the by pulling out the battery.
Also, when the phone boot i've first the "SFR" logo and then, instead of the bootimage i've only an black screen, juste the time of the bootimage, after that, i juste have to presse the menu button to wake up the device.
I don't understand what it happens bescause before getting my N1 it was working fine...
I hope someone here avec an answer !
Thanks to all the XDA comunity
Click to expand...
Click to collapse
Kind of a strange problem.
Does the phone boot up still?
Did you try reflashing your recovery image? (flash_image recovery recovery.img)
if not
can you get into fastboot?
if so then fastboot flash recovery recovery.img from the command prompt of your pc.
Good luck.
Hello,
thanks for you answer.
I've tried to flash the recovery but didn't works.
I don't try the fastboot mod but I don't have the phone with me for the moment.
I'll try ASAP.
video : youtube.com/watch?v=RJmXjV8E4jw
edit : ok I asked to my girlfriend to try, fastboot works.
gniouki said:
Hello,
thanks for you answer.
I've tried to flash the recovery but didn't works.
I don't try the fastboot mod but I don't have the phone with me for the moment.
I'll try ASAP.
video : youtube.com/watch?v=RJmXjV8E4jw
edit : ok I asked to my girlfriend to try, fastboot works.
Click to expand...
Click to collapse
Then we have a shot.
Procedure
1.Turn your phone off. Turn it on by holding Back and Power, or Vol. down and Power. Either way, boot into the bootloader.
You should see the three Androids on skateboards, and the menu title should say "Fastboot".
2.Connect your device to the computer. The display on your phone should now say "Fastboot USB".
3.Open up the shell/terminal on your computer, and type
fastboot devices [enter]Your device should be listed with it's serial number, and should say "fastboot".
4.Change directory to where you have saved your recovery image. I.e. type "cd /path/to/recovery.img in windows prompt, press enter.
5.You may issue a "dir" command (Windows) or "ls" (Unix/Linux) to make sure you are at the right directory, or just skip this step.
6.Type
fastboot flash recovery recovery.img [enter]
Check your phone's display, as recovery is being sent and flashed to your device.
Check your command prompt/shell to make sure the process is over.
Click to expand...
Click to collapse
Thanks a lot.
I try it as soon as possible and will post here to say if has work.
Thanks again, I love XDA community
Hello again,
when i try to flash recovery via fastboot i've got this message :
remote: signature verify fail.
I've the 1.7.0G amon ra recovery and a 32B magic with Hboot 1.33.0004
When i try to run the recovery with : fastboot boot recovery.img i've got a reboot, SFR logo and black screen.
Could you help me with these information ?
Thanks
gniouki said:
Hello again,
when i try to flash recovery via fastboot i've got this message :
remote: signature verify fail.
I've the 1.7.0G amon ra recovery and a 32B magic with Hboot 1.33.0004
When i try to run the recovery with : fastboot boot recovery.img i've got a reboot, SFR logo and black screen.
Could you help me with these information ?
Thanks
Click to expand...
Click to collapse
Okay... I think that you need the Engineering SPL because right now you should see SHIP S-ON G on your screen. That means it's the standard SPL. To modify anything you need the Engineering SPL. In this case I think you need 2004 from this thread: http://forum.xda-developers.com/showthread.php?t=529019 but to do that you may need to create a goldcard.
So just to verify with you, you cannot boot up your phone at all and you cannot access recovery? What do you get when you connect it to your computer, boot it up and type adb devices in the command prompt?
Also try starting the phone while holding MENU. This sometimes helps.
Thanks for your answer, i don't have the phone in my hands now, i'll ask to my girlfriend to boot it with home.
Adb devices didn't recognize my device.
edit : booting with home holding down bring me à black screen, certainly the "invisible" recovery.
gniouki said:
Thanks for your answer, i don't have the phone in my hands now, i'll ask to my girlfriend to boot it with home.
Adb devices didn't recognize my device.
edit : booting with home holding down bring me à black screen, certainly the "invisible" recovery.
Click to expand...
Click to collapse
There is no such thing as an invisible recovery.
It is possible that your recovery was deleted or corrupted.
If you did have a recovery you would still be able to access the device through adb. All you would need to do is place Amon_Ra recovery.img (G) onto your sdcard with another phone or adapter, place it into your damaged device and boot it into your "invisible recovery" and use adb shell devices in command prompt. If you do have a recovery image installed (but no text) you should see your device. If not then you will probably have to start over with the goldcard. If it does detect your device then all you need to do is mount /sdcardflash_image recovery /sdcard/recovery.img (or whatever it's called)
Okay thanks, I'll try this ASAP.
I could put the recovery on the SD directly from the phone, right ?
Cause the phone could boot, just that I can't see recovery, do an hard reset and see the bootimage.
gniouki said:
Okay thanks, I'll try this ASAP.
I could put the recovery on the SD directly from the phone, right ?
Cause the phone could boot, just that I can't see recovery, do an hard reset and see the bootimage.
Click to expand...
Click to collapse
Wait! What? If the phone boots then simply put the recovery file on your sdcard and run flash_image recovery /sdcard/recovery.img from adb shell
-or-
from terminal on your phone
flash_image recovery /sdcard/recovery.img
I'll try it,
how can i acces to the terminal of the phone ?
Thanks
gniouki said:
I'll try it,
how can i acces to the terminal of the phone ?
Thanks
Click to expand...
Click to collapse
Through teminal emulator?
Ok, done it from the terminal emulator on the phone, seems working but still booting on a black screen
gniouki said:
Ok, done it from the terminal emulator on the phone, seems working but still booting on a black screen
Click to expand...
Click to collapse
So you boot up your phone while holding the Home button and it gives you a plane black screen with absolutely NOTHING on it at all?
Hmmm... I would have to say that the next step is either:
Try a different recovery such as Clockwork
Start completely over with the Goldcard
Other than that... I really don't know.
This is exactly that, pressing home while phone is starting gives me a black screen with nothing on it.
I'll try another recovery and will see later for the goldcard.
thanks
gniouki said:
This is exactly that, pressing home while phone is starting gives me a black screen with nothing on it.
I'll try another recovery and will see later for the goldcard.
thanks
Click to expand...
Click to collapse
Sounds good. Good luck.
Flashed the clockwork recovery and when trying to launch recovery it stuck on the SFR logo but normal boot still working
Edit : Using ROM Manager app it says that the clockwork recovery is installed...
Bump. I have no clue then man. I can't understand why all of a sudden you have nothing more than a blank (black) screen for recovery. The only thing left for you to try is the goldcard method. It will put your phone right back to the way that it was out of the box. Unrooted and everything. It'll be starting over from square one.
In fact, I rooted a friend Fender last night and I forgot how easy it was once you already had the goldcard. Simply:
place the card into the card slot,
reboot into bootloader,
press the back button and let it do it's thing.
Afterwards reboot the phone to bootloader again
go to fastboot mode and
fastboot flash radio radio.img,
fastboot flash hboot hboot.nb0,
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img.
Then power off the device.
Hold Home and power the device back on and Voila! You should have a recovery screen.
If that doesn't work... well... I would have to see it to believe it.
For details and links to create a goldcard just Google it. Easy to find.
Something I don't understand is that ROM Manager recognize my recovery ... so I've a recovery and it's realy invisible cause i've got this black screen ...
Edit: "Rom Development" is only meant for very advanced technical discussion directly related to ROM development activity and the delivery of actual ROMs and ROM components ONLY. Nothing else goes in here. Moved thread to "General." Please refer to "[REF] STOP! Read before posting!" ~TheRomMistress
Not able to get ROM manager to flash Clockwork for recovery. It shows successful but then when I reboot to recovery, it shows this image of red triangle over a cellphone, probably meaning recovery does not function.
Any ideas? I already have S-OFF done...
BriEE said:
Not able to get ROM manager to flash Clockwork for recovery. It shows successful but then when I reboot to recovery, it shows this image of red triangle over a cellphone, probably meaning recovery does not function.
Any ideas? I already have S-OFF done...
Click to expand...
Click to collapse
This is how I got it to work:
Step 1 - run Visionary R12 to get perm root.
Step 2 - Push the files from page 1 to phone via adb
./adb push [path to file]/wpthis-Z.ko /data/local/wpthis-Z.ko
./adb push [path to file]/hboot_7230_0.84.2000_100908.nb0 /data/local/hboot-eng.img
(as you can see above, I renamed the HBOOT file on the phone just to be consistent)
note: I'm not sure if you HAVE to put them in /data/local of if you can just run this from /sdcard - but I didn't want to experiment
Run the commands below as root via adb shell or from a terminal on your phone.
Step 3 -
insmod /data/local/wpthis-Z.ko
Step 4 -
dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
Step 5 -
sync
Step 6 - Wait two minutes and then run clockwork and try to install recovery - do not reboot your phone.
Worked for me. Good luck.
I already have S-OFF and perm root though, why do it again?
So you're saying the WP isn't perm and neither is S-OFF? Is our root perm even lol?
Just reflash clockwork from rom manager. Same thing happened to me.
foxfire235 said:
Just reflash clockwork from rom manager. Same thing happened to me.
Click to expand...
Click to collapse
Same here, just reflash clockwork a second time and it should work.
Sent from my HTC Vision using XDA App
I had to flash CW twice as well. It seems successful after the first try but booting into recovery would show a black screen with a small phone icon.
codf4ther said:
I had to flash CW twice as well. It seems successful after the first try but booting into recovery would show a black screen with a small phone icon.
Click to expand...
Click to collapse
Did you just flash it twice, or did you follow the complete instructions twice?
Hello all,
I have been using the super one click method to root my HTC Magic Saphhire 32A.
It works well so far albeit need to alter some SU files in the program. Running of terminal emulator with the command prompt SU confirmed that I have the superuser rights.
Now the problem is whenever I use ROM manager to reboot in recovery, the phone restart, HTC logo shows, then the next screen I see is a big asterisk and a phone image, after this I pressed Home + power, the screen manage to switch to Android system recovery utility, BUT with only 3 options:
1) Reboot system now
2) Apply sdcard:update.zip
3) Wipe data/factory reset
And in the end of the screen, there is one line highlighted in red: E: can’t open /cache/recovery/command
After the phone been rebooted, I switched off the phone. And Pressed vol - with power button, same issue happen too with the asterisk sign shows on the screen. After unrooting it, the phone recovery mode are back to normal with the 3 androids in skates appear on the screen.
Have anyone face the same problem? Any ways to sort this out? I am planning to back up my stock ROM, and wanted to try out some cyanogenmod ROM. I tried Googled and read lots of forum post but left without a solution. Any helps are appreciated! Cheers!
p/s: I am a noob in Android OS. XD
I have the legend and these is a process of booting the recovery from there as update.zip. have you tried renaming the ROM update.zip and flashing it from there?
Sent from my HTC Legend using XDA App
I fiddled with the ROm manger setting by choosing "delete recovery prior to flashing", and now it makes it worse.
I selected "reboot in recovery" in ROM manager and the phone reboot, but just stuck at the HTC start up screen.
I plugged in the phone while trying another recovery reboot, and it still stuck at the HTC screen, but with a red line on the top saying "fastboot USB". Gosh I think i am going no way with this...
E:Can’t open /cache/recovery/command
Same fault here mytouch 3g unlocked at&t 32b downgraded too cupcake and tried
getting E:Can’t open /cache/recovery/command
home and power button down still cant get you in recovery? you cant flash any other working rom?
32b myTouch 3g 2.2.1
Cyanogen Nightly 271
Hboot - 1.33.0006
Radio - 2.22.19.26i
Kernel - 2.6.35.9
ADW 1.3.3
ClockworkMod Recovery
Slideit keyboard
Did you flash custom recovery with ROM manager? Or you just rooted the phone with 1 click method?
Sorry for the late reply. I am just back from overseas business trips. I used Clockmod ROM Manager and did a backup, tried reboot in recovery, and the phone rebooted itself but stuck at the HTC logo now.
I can confirm that the phone is rooted with super user permission.
The reason being the phone didn't manage to get into recovery mode might be due to the missing recovery.img in the phone. Pushing the img file to phone through Clockmod didn't work apparently, so I tried command prompt from PC fastboot flash recovery c:\recoveryxyz.img. It failed too with an error remote failed.
I tried using the terminal emulator in the phone and tried pushing the recovery image again and it didn't happen too. Can some one please help? Cheers!
Download ROM manager and you have option that says install custom recovery it will install Clockwork, and you have flash alternative recovery it installs amon ra's recovery i prefer most
Will try it tonight and revert for the result. Cheers!
I have tried flashing alternate ROM through ROM manager and for once it managed to boot into recovery mode. BUT the device hang right after that, I can't select any of the options and have to pull the battery out to force shutdown.
I tried using fastboot flash recovery *.img remotely through my PC while the phone is in fastboot USB mode, and my command prompt stated FAILED (remote: not allow)
Urgh, I think I might have missed something here... Could some one please help? Cheers!
p/s: my objective is to upgrade my stock ROM android 1.5 to cyanogen ROM. Cheers!
I don't know whether this info helps but here goes:
phone info:
sapphire pvt 32A ship s-on H
Hboot- 1.76.0007 (SAPP10000)
CPLD - 12
RADIO - 6.35.07.29
AUG 4 2009
callmeneotheone said:
I have tried flashing alternate ROM through ROM manager and for once it managed to boot into recovery mode. BUT the device hang right after that, I can't select any of the options and have to pull the battery out to force shutdown.
I tried using fastboot flash recovery *.img remotely through my PC while the phone is in fastboot USB mode, and my command prompt stated FAILED (remote: not allow)
Urgh, I think I might have missed something here... Could some one please help? Cheers!
p/s: my objective is to upgrade my stock ROM android 1.5 to cyanogen ROM. Cheers!
Click to expand...
Click to collapse
OK here is the thing did you chose right model of your phone? HTC magic is 32A and mytouch and something else is for 32B you maybe flashed the wrong one?
Thanks WoblyGoblin for taking your time to help. Yes, I have selected the correct phone model. I chose HTC Magic.
Did you install the recovery?
Sent from my HTC Magic using XDA App
I am stuck in trying to install recovery img into the phone. can't boot in recovery mode, tried ROM manager and remote push of recovery img into the phone.
Please refer to the previous post for more info. Cheers!
Ok here is the solution for you use this guide but download this apk and this recovery.
If you dont have 1.5 android but 1.6 download Terminal emulator from market and when you start it type first:
su
flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img
Hello mate,
i just tried the method and I am stuck at FlashRec backup recovery image step.
I clicked on backup recovery image, but there is a command prompt that says:" backup FAILED: Could not run command.
FYI, I am running on Android 1.5. On the edge of giving up rooting and loading a custom ROM now and without a MARKET apps on the phone.
callmeneotheone said:
Hello mate,
i just tried the method and I am stuck at FlashRec backup recovery image step.
I clicked on backup recovery image, but there is a command prompt that says:" backup FAILED: Could not run command.
FYI, I am running on Android 1.5. On the edge of giving up rooting and loading a custom ROM now and without a MARKET apps on the phone.
Click to expand...
Click to collapse
Did you try terminal emulator app?
And commands that i gave you?
yes mate, have tried flash_image recovery command from the terminal app and tries to restart in recovery without any result.
I have did a few research and read up and found out that I am stuck with the south east asia Magic model without the google based support, with no market apps and it is perfected SPL.
Quite upset by it. LOL!
callmeneotheone said:
yes mate, have tried flash_image recovery command from the terminal app and tries to restart in recovery without any result.
I have did a few research and read up and found out that I am stuck with the south east asia Magic model without the google based support, with no market apps and it is perfected SPL.
Quite upset by it. LOL!
Click to expand...
Click to collapse
Try this
I have steves 1.53 rom stored on my sd idk if theres a flashin app that can flash it from the sd on to the att Dell streak (non branded streak). Or away to flash on a mac and im having trouble with my windows xp flash!? Idk why, if someone can walk me through it. Im used to flashing HTC windows phones and even built my own version windows roms and also Iphone apps and I.OS ice built my own.... Come to think of it is there away to actually put a full fledged os on the streak or dual boot even to alow to get as much use out of this unit? Or even overclock it and how to over clock if you could walk me through it!?
Sent from my Dell Streak using XDA App
There are unix parameters for fastboot, that means that there must be a unix SDK that can be used in Mac OSX.
I have not seen any dual boot solutions.
And most of your questions are answered in this forum.
Try: Guide to Upgrading and Downgrading the Streak
Or the combination of:
NEW StreakMod Recovery
and
StreakDroid 1.6.0 ( aka Install-o-Rama ) Release Post
Yes you can do everything with a mac (i actually find it easier on a mac as you don't have to deal with drivers like you do on windows).
Go to developer.android.com and download the SDK for mac. Get the Fastboot file for mac (attached cuz i'm feeling nice) and drop that in your SDK/Tools folder.
Add the full path of the sdk/tools folder to your bash profile (search on google) so you can use the fastboot-mac, adb, etc commands from the tools folder in Terminal without being in that directory.
Once you got that, you have to know a couple terminal commands, basicly just how to navigate to the folder where you downloaded the streakmod recovery (google for "mac terminal commands cheat sheet" and you might find something useful.
Once you know how to navigate via terminal its as simple as flashing the StreakMod recovery. Put your device in bootloader mode (search or see the wiki) then in terminal it should be something along the lines of:
Code:
fastboot-mac -i 0x413c flash recovery recovery.img
Then to get into the recovery youd reboot your device after the flash
Code:
fastboot-mac -i 0x413c reboot
hold the volume up and down buttons, select option 2 (flash update.pkg or whatever) and that'll take you into the StreakMod recovery [if you get the dell logo with an exclamation mark in a triangle and nothing is showing, press the power button]
From streakmod recovery select Flash update.zip from sd card then select "select .zip from sd card" and then use volume up/down to scroll up/down and camera button to select and voila you are flashing a rom with your mac :S
Also before you flash the rom you might want to do a full nandroid backup incase your update messes up you can do a full restore and be exactly at the point before you attempted to flash your device.
Nandroid is under the Advanced option in the streakmod recovery.
Good luck
OH p.s.
EVERYTHING you need to know is on the forums/wiki/etc.
Please do a search, i know you have to read through a bunch of crap but its worth it. you'll learn a ton
i enjoy how he called it an ATT non-branded dell streak.
I followed ur guide an all but im trying to install clockwork on my streak (2.2 stock 318) and it gets stuck at <waiting for device>
anyone know how to get past this?
iphonepimp said:
I followed ur guide an all but im trying to install clockwork on my streak (2.2 stock 318) and it gets stuck at <waiting for device>
anyone know how to get past this?
Click to expand...
Click to collapse
I always had to install the ADB drivers manually, before fastboot mode worked.
Here you can download a manual on how to install the drivers.
peppi.nl said:
I always had to install the ADB drivers manually, before fastboot mode worked.
Here you can download a manual on how to install the drivers.
Click to expand...
Click to collapse
I didn't think on a mac you had to install drivers
peppi.nl said:
I always had to install the ADB drivers manually, before fastboot mode worked.
Here you can download a manual on how to install the drivers.
Click to expand...
Click to collapse
I'm running on a mac... I must be blind cuz i can't find a mac guide to install drivers...
First download android sdk from
http://developer.android.com/sdk/installing.html
install the application and then
then copy all the files in platform-tools to tools
export PATH=${PATH}:/Users/drgopoos/Desktop/Android/android-sdk-mac_86/tools
when u do this commands u can use wthout ./
open terminal
and cd the directory of the installation folder ( /Android/android-sdk-mac_86/tools )
this is the command for flashing
./fastboot -i 0x413c flash recovery recovery.alt.img
iphonepimp said:
I followed ur guide an all but im trying to install clockwork on my streak (2.2 stock 318) and it gets stuck at <waiting for device>
anyone know how to get past this?
Click to expand...
Click to collapse
Is your device in fastboot mode? Power off, power on holding camera button, when you get the white screen tap on fastboot on top left, then plug in streak to mac.
Sent from my Dell Streak using XDA App
I know I read somewhere with a few people having this issue, but every time I am going into recovery, flashing or backing up, I seem to always freeze on a black blank screen. The only way out is to take the battery out and put back in and try booting with Hboot, or whatever its called when you hold volume down.
I am so annoyed with this after months and really just want any help or suggestions possible. I tried fixing permissions, wiping data and even factory reset from HBoot.
I am out of options known to me on fixing this. My last thought was to reflash the bootloader or something. I would just like to be able to reboot without having the phone freeze. Thanks in advance.
Jp2010 said:
I know I read somewhere with a few people having this issue, but every time I am going into recovery, flashing or backing up, I seem to always freeze on a black blank screen. The only way out is to take the battery out and put back in and try booting with Hboot, or whatever its called when you hold volume down.
I am so annoyed with this after months and really just want any help or suggestions possible. I tried fixing permissions, wiping data and even factory reset from HBoot.
I am out of options known to me on fixing this. My last thought was to reflash the bootloader or something. I would just like to be able to reboot without having the phone freeze. Thanks in advance.
Click to expand...
Click to collapse
try reflashing the recovery...
Are you on the eng bootloader or stock one?
From my fist to your face, enjoy!
I have tried it a few times via rom manager.
Mr.Highway said:
Are you on the eng bootloader or stock one?
From my fist to your face, enjoy!
Click to expand...
Click to collapse
I have
Glacier PVT ENG S-OFF
HBOOT - 0.85.2007
MICROP -0429
Radio - 26.03.02.26_M
eMMC- boot
Try flashing a older recovery for the phone, then the new one. I had that problem before,I just pulled The battery an put it back in. Then it started to do the backup. It's a risky move though, wouldn't advise it. I'll try to think of a better solution
From my fist to your face, enjoy!
Jp2010 said:
I have tried it a few times via rom manager.
Click to expand...
Click to collapse
Don't flash the recovery via Rom manager. Flash it manually through hboot
Sent from my HTC Glacier Sense 3.0 using xda premium
Thank you all for your help, flashing through HBoot seemed to have fixed it. You guys are great, thanks for the tips.
Jp2010 said:
Thank you all for your help, flashing through HBoot seemed to have fixed it. You guys are great, thanks for the tips.
Click to expand...
Click to collapse
Hi guy, my Mytouch 4G have this error, sometime it reboot and freeze. Please explain in detail how you fix it !!!
Thank you so much!
trongkhoi said:
Hi guy, my Mytouch 4G have this error, sometime it reboot and freeze. Please explain in detail how you fix it !!!
Thank you so much!
Click to expand...
Click to collapse
flash the recovery through bootloader.
DEVICE MUST BE S-OFF AND ROOTED BEFORE CONTINUING!!
YOU MUST HAVE ADB INSTALLED, AND KNOW HOW TO USE ADB BEFORE CONTINUING, IF YOU DON'T KNOW, READ THIS: http://forum.xda-developers.com/showthread.php?t=928370:
1) download the recovery image from here: http://forum.xda-developers.com/showthread.php?t=1242901
2) rename the file to recovery.img
3) VERIFY THAT THE MD5SUM IS CORRECT (USING MAND5 APP FROM THE MARKET) IMPORTANT!!
4) move recovery.img to where ever your adb tools folder is located, EXAMPLE: C:/androidSDK/tools
5) reboot the phone into bootloader (make sure fastboot is OFF)
6) connect the phone to your computer, and your computer should recognize a fastboot device
7) type:
Code:
fastboot devices
to make sure your phone is seem by adb
8) then type:
Code:
fastboot flash recovery recovery.img
ALTERNATIVE WAY:
1) download the recovery file
2) VERIFY MD5SUM
3) put the file in your adb tools folder EXAMPLE: C:/androidSDK/tools
4) connect the phone to computer
5) type:
Code:
adb devices
to make sure the computer sees the phone
6) type:
Code:
adb push recovery.img /sdcard/recovery.img
this will put the recovery image to your SDCARD
7) then download terminal emulator from the market (any one will work)
8) type the following:
Code:
su (hit enter)
flash_image recovery /sdcard recovery.img (hit enter)
reboot recovery (hit enter)
VIOLA! CONGRATULATIONS, YOU NOW HAVE MANUALLY INSTALLED CLOCKWORKMOD RECOVERY 5.0.2.0 TO YOUR HTC GLACIER!
hit the thanks button if it worked please!
Thank you very much!
My phone is OK. Thanks again
Dang Saranhai. Nice Tut.
Sent from my HTC myTouch 4G using XDA App