Database Users

CWMRecovery issue with update.zip

I have downloaded ROM Manager and flashed CWMRecovery_DJ05_DL09.tar.md5 via Odin to my phone. When I try to apply the update.zip I get stuck with white triangle and orange exclamation point.
Any assistance would be greatly appreciated.

lbmorgan said:
I have downloaded ROM Manager and flashed CWMRecovery_DJ05_DL09.tar.md5 via Odin to my phone. When I try to apply the update.zip I get stuck with white triangle and orange exclamation point.
Any assistance would be greatly appreciated.
Click to expand...
Click to collapse
Did you flashed via PDA in ODIN?
Then, did you install the ClockWork Recover mod via ROM Manager?

Yes, I flashed via PDA in ODIN.
As far as "install" CWR in ROM Manager .. not sure. I Flashed CMR successfully and granted SuperUser permission.
Is there more?
BTW .. thanks!

lbmorgan said:
Yes, I flashed via PDA in ODIN.
As far as "install" CWR in ROM Manager .. not sure. I Flashed CMR successfully and granted SuperUser permission.
Is there more?
BTW .. thanks!
Click to expand...
Click to collapse
OK. Try this.. put the update.zip found here http://forum.xda-developers.com/showthread.php?t=913470 into the root of your SD card.
Use in ROM Manager select "Boot into Recovery"..
By the way, you don't apply the update.zip when you use Boot Into Recovery from ROM Manager. It does that automatically already.
If you see the green recovery, then you are in CWMR.
You only apply the update.zip if you are in the stock recover (BLUE)...

Thank you.
I did as you said and put the update.zip file on my sd card.
I used ROM Manager and Booted into Recovery. It automatically put me into stock recovery (blue) and gave me the same error. I selected apply update.zip and same error. I guess I am just not meant to have it.

lbmorgan said:
Thank you.
I did as you said and put the update.zip file on my sd card.
I used ROM Manager and Booted into Recovery. It automatically put me into stock recovery (blue) and gave me the same error. I selected apply update.zip and same error. I guess I am just not meant to have it.
Click to expand...
Click to collapse
Hmmm.. What Build version are you running? DH12? DL05? DL09? DL30?
Did you make sure you could open the the .tar file you flashed in ODIN? What about the .zip? Make sure you can open both of them via 7zip, to verify that you are not corrept.
Try flashing the .tar file again in ODIN, via PDA (of course)..

dl09 .. Really all I want to do is flash the dl30 .. Fml
Sent from my SCH-I500 using XDA App

I keep getting the same error but I have not seen a good answer yet. I tried to follow the guide by Syn Ack but I can not get past step 2. I get the error E: failed to verify whole-file signature...I have clockworkmod, I ran "Flash ClockWork Recovery" and choose the Fascinate. I also tried "Apply sdcard:update.zip" when I got the E:failed error. What am I missing? I read everything above. I am on DL09, rooted.

Turns out all the .tar files on this site are corrupt .. I found cwmrecovery.tar elsewhere and flashed that and it worked fine.
http://www.multiupload.com/C0HFVLSI22

lbmorgan said:
Turns out all the .tar files on this site are corrupt .. I found cwmrecovery.tar elsewhere and flashed that and it worked fine.
http://www.multiupload.com/C0HFVLSI22
Click to expand...
Click to collapse
I never had any issues with any of the tar files I downloaded from here...

wideopn11 said:
I keep getting the same error but I have not seen a good answer yet. I tried to follow the guide by Syn Ack but I can not get past step 2. I get the error E: failed to verify whole-file signature...I have clockworkmod, I ran "Flash ClockWork Recovery" and choose the Fascinate. I also tried "Apply sdcard:update.zip" when I got the E:failed error. What am I missing? I read everything above. I am on DL09, rooted.
Click to expand...
Click to collapse
Did you flash the .tar file with ODIN via PDA??

yes, I reflashed odin by pulling the battery, holding down volume button and plugging in usb cable. Everything worked fine after that.

OMG I have an EMERGENCY... please help, I've searched for hours. :-(

So I am not to NOOB but I sure acted like it last night when I was way tired and tried to flash a ROM. Here is what I did...
I didn't catch that I didn't have the CWM but that I had booted into the stock recovery tool... Well I didn't before it was to late that is...
I clicked WIPE DATA
I clicked WIPE CACHE
Then noticed there was no "install from SD"
So it seems like whatever I find to install from ODIN I can't get the CWM to install so I can then flash a ROM!
I need my phone up for work, I am in HOT SH!T!
How can I either flash a rom via stock recovery "update format" OR install CMW via ODIN?
PLEASE HELP ASAP!!
Thank you

why don't you just flash again via odin and then root your phone via odin as well?

Don't quite understand whats your problem. So what if you wiped data and cache the rom is still there. Reboot normally and flash cfroot according to your firmware and then you should have cwm up and running. After that flash desired rom and the end.
Sent from my GT-I9100 using xda premium

Flash one of the CF-Root kernels through Odin, whichever one matches the firmware you're running. They have CWM baked in, along with root so you can flash a ROM afterwards.
If you can't get into download mode, turn your phone off, plug it in and hold down + power + home and it should boot into download mode. Then you can flash with Odin.

I thought the same thing, that so what that I wiped them... but when I rebooted the phone it just sits at the "Rethink possible screen"

I can get into download mode and I did find the "cf" post but I dunno what kernel I am running as I can't boot to go into settings to seek.

if you in recovery mod choose reboot, and it will be ok, than read: http://forum.xda-developers.com/showthread.php?t=1103399,
or put in download mod: turn your phone off, hold down + power + home. Then flash with Odin.

I know you probably don't want to, but you can try doing a factory reset, that should allow you to get your phone up and running. If you have gmail installed it should put all your contacts back, as long as you backed up to gmail.
If you have an old copy of titanium backup you won't loose ALL your apps, this is why I tend to back up every weekend, I'm only a week behind with everything if problems arise....
Cheers...

Flash stock rom... Download cwm and flash with odin.... Then instal rom u want with cwm...
Sent from my GT-I9100 using xda premium

like I said, I am not a noob, just made a mistake...
I found the cf-kernel page, but I dunno what kernel I am running and so I dunno what kernel to flash (It seems vital)
"just rebooting" don't work lol I wish... it hangs at the "rethink possible" boot screen...
I was rooted but running the stock rom, if I can get CWM installed I think I will be golden, but whatever I seem to flash from ODIN don't work :-( no matter what nothing will flash as "PDA" but when I flash using "phone" it seems to install "zimage" which is the embedded file and succeeds and phone reboots... but still only to the rethink possible point.

flash any stock firmware then flash supercore 2.0 and do whatever you want from there

Think i know what the problem is,i have same issue sometimes,try flashing anogher rooted Kernel through odin,make sure its like if the rom is a kj3 that it has a kj3 kernel.see if that works

ultramag69 said:
you can try doing a factory reset... Cheers...
Click to expand...
Click to collapse
Be glad to but it isn't an option in the recovery?
My options are as follows...
Reboot system now
Apply update from SD
Wipe/reset
Wipe/cache

been in similar, if not same situation, things were missing from cwm recovery, like you wrote...if memory serves me fine,
flash stock fw with pit, repartition and everything...
then some rootec kernel with recovery...

Oh sh!t... just flashed the pit file here... http://www.darkyrom.com/community/i...-with-odin/#download-a-pit-file-for-the-i9100
and odin said success... and screen went black.
Not responding at all now :-(

let's go in a safe way...as long as you have download mode, you're OK.
Go to samfirmware or somewhere on XDA and find FULL STOCK FIRMWARE with proper .pit file and flash it with odin. Not kernel, not anything that is not full rom.
since you state that you are not noob, you know what from there.

abovenbeyond said:
Oh sh!t... just flashed the pit file here... http://www.darkyrom.com/community/i...-with-odin/#download-a-pit-file-for-the-i9100
and odin said success... and screen went black.
Not responding at all now :-(
Click to expand...
Click to collapse
What on earth are you doing?
It clearly states:
I9000 & I897 owners (not I91000!!!) may also need a PIT file (also included in RE ROM ZIP files). I will explain further what it's for.
Why didn't you follow a tutorial on xda? Can you boot in download mode?

borstri said:
let's go in a safe way...as long as you have download mode, you're OK.
Go to samfirmware or somewhere on XDA and fin FULL STOCK FIRMWARE with proper .pit file and flash it with odin. Not kernel, not anything that is not full rom.
since you state that you are not noob, you know what from there.
Click to expand...
Click to collapse
Sounds amazing but after my post above I not can't get the phone to power on although I hear the laptop detect it as I attempt to power down or up, but no screen or led display...
Really worried now... ****!

Lennyz1988 said:
What on earth are you doing?
It clearly states:
I9000 & I897 owners (not I91000!!!) may also need a PIT file (also included in RE ROM ZIP files). I will explain further what it's for.
Why didn't you follow a tutorial on xda? Can you boot in download mode?
Click to expand...
Click to collapse
I flashed this...
Download a PIT file for the I9100
Download EXT4.pit file (2KB)
(for the S2 only)

battery pullout, then three button combo for download

[Q] Unusual s4 brick help

Forgive my noobishness. I've actually lurked xda boards for years and used the EXCELLENT user made guides for all my phones. However, I'm at a complete loss and nothing I've searched, read, or tried has worked and it's consumed my entire day and left me with no phone at all. I cannot believe this phone can be dead unless there's some physical problem so I'm really hoping someone can walk me back to normal.
I bought a new S4 from T-Mobile on Labor Day (obviously I'm in the US). 2 days ago I rooted it successfully using Jimmy Mcgee's video and the various links including mattlgroff's and k0nane's threads. No problems whatsoever. After I did that I used Ti Backup and backed up the apps just in case, then I ran the moderate version of the Truly Clean script and did a factory reset. Everything was perfect. Then...
My wireless data stopped connecting. But that's not my current problem.
I decided to unroot and go back to factory to a) see if something I did was causing the data issue or b) take it back for an exchange at the store. I started with the K0nane and the Samersh72 guides, but frankly tried so many things and failed I don't know were I went wrong. First I tried M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5
Then I tried Samsung-Updates.com-KERNEL-SGH-M919-TMB-M919UVUAMDL-1366964131.tar
Then I tried the one I did to root it OUDHS-Recovery-jfltetmo-1.0.3.3.tar
Mostly I have gotten a NAND writing fail in Odin with everything I tried (yes I tried making sure Kies is off, the original usb cable, and another PC) which then locks me out of the recovery boot screen and gives me some yellow triangle between a phone and a pc with an error about the stock firmware and tells me to connect to Kies. I can fix that by flashing this PIT file CSB_signed_Fusion3_EUR_0325_V2.pit which allows me to go back to the OUDhs recovery screen.
Also Kies will no longer connect to this device and it says driver install failure when I connect it to the PC (except it stell charges, using the stock cable still).
Dear god someone help me, and I will buy you a beverage. I'm doing instant email notifications of replies. PLEASE.

I'm not sunk yet. I'm rereading the FAQs and guides and I'm going to start over to where I was able to get the rooted version to work. I know the CWM recovery is working so we'll see.

Pull out battery for a while, then go to download mode (vol down+home+power) and flash stock fw in odin.
Wysyłane z mojego GT-I9505 za pomocą Tapatalk 2

diodaq said:
Pull out battery for a while, then go to download mode (vol down+home+power) and flash stock fw in odin.
Wysyłane z mojego GT-I9505 za pomocą Tapatalk 2
Click to expand...
Click to collapse
Ok I will try that. Also I am now trying to flash Samsung-Updates.com-SGH-M919-TMB-M919UVUAMDL-1366964131\M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5
I am getting a little farther in the Odin process but it still says fail right after
aboot.mbn

Also I originally followed Jonny's video and only flashed the cwm custom recovery though odin. I flashed the rooted zip file from my phone's internal sd card like in the video. Now I can't get to the internal memory so I tried saving the zip file (the one I used to root it) on the ext sd card. I'm unable to flash that rooted zip from the ext sd card because the phone wants to reboot as soon as it starts doing so.
Is there a way to flash that rooted zip file (or a stock one) from an external sd card?
Is there a way to flash that rooted zip file through odin?

All you have to do is get into download mode and flash stock mdl tar with odin. After it's finished, it'll go into recovery by itself and wipe some small cache partition by itself, after it does that, hold onto the volume up button and get into recovery again and do a factory reset. This is so you don't go into a bootloop. Now get CF auto root and flash it so ur rooted. Next flash a custom recovery and ur all set. It's really easy to do.

norml said:
All you have to do is get into download mode and flash stock mdl tar with odin. After it's finished, it'll go into recovery by itself and wipe some small cache partition by itself, after it does that, hold onto the volume up button and get into recovery again and do a factory reset. This is so you don't go into a bootloop. Now get CF auto root and flash it so ur rooted. Next flash a custom recovery and ur all set. It's really easy to do.
Click to expand...
Click to collapse
So far I have been totally unable to get odin to flash a stock tar or any tar since I did the first one 2 days ago. Always, fail.

mattwood440 said:
So far I have been totally unable to get odin to flash a stock tar or any tar since I did the first one 2 days ago. Always, fail.
Click to expand...
Click to collapse
Are you loading the stock tar by clicking PDA?

norml said:
Are you loading the stock tar by clicking PDA?
Click to expand...
Click to collapse
Yes. Also when it fails, it locks me out of the recovery mode. Can you tell me what happens when you flash a new PIT file? Doing that alone does not get a FAIL message and it brings back the recovery screen. However, when I select the pit file it automatically selects the re-partition option which the k0nane says is a no-no (at least for flashing the pda, not sure about the pit which is why I'm asking).

mattwood440 said:
Yes. Also when it fails, it locks me out of the recovery mode. Can you tell me what happens when you flash a new PIT file? Doing that alone does not get a FAIL message and it brings back the recovery screen. However, when I select the pit file it automatically selects the re-partition option which the k0nane says is a no-no (at least for flashing the pda, not sure about the pit which is why I'm asking).
Click to expand...
Click to collapse
Pit file basically means repartitining the storage chip of your device. Yes odin will automatically check repartition when flashing pit files. Flashing pit file is serious business. I recommend following the unbrick/ unroot thtead in the general section. Its pretty precise and I think since you are getting repeated fails in odin you will have to flash pit file.
You will be fine if you follow the instructions there precisely.
Sent from my GT-I9500 using xda app-developers app

OMG it worked. K0nane's procedure worked on a different pc. Dowloaded a fresh Kies but didn't install any of the extra stuff with it. Downloaded, extracted, and ran odin as admin. Hooked it up. Downloaded and extracted the UVUAMDL tar. Put that in the pda box and hit start. Mine would immediately FAIL but this one kept working, and working, and working and reboote. Why why why? I've been at this for about 16 hours. That makes no sense. Thanks anyway. I'll try the other root method when I'm feeling brave again.

[Q] ***HELP i337 MK2 WON'T BOOT***

Hello all!
First off I would just like to say thank you, thank you, thank you. I have been a long time lurker on these forums (since the evo) and have gotten a lot of useful information from here. Now to my issue. I have had no phone for two weeks now, and have been doing search after search. I upgraded my phone to 4.3 (it was mk2) and rooted it via motochopper. So my dumbass tried to flash a custom rom with kn0x0ut and it failed. The phone rebooted and now will boot up to the samsung custom screen. You can hear the att boot up sound but no image. I can get into odin mode and stock recovery. When I am in odin it says:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMC BURST MODE enabled
I have tried sideloading the stock MJ9 and MK2 files to no avail. I really hope somebody can help me, I don't know how much longer i can go without a phone. Thanks guys and Merry Christmas!!!

yea sounds like bricked you cant flash roms on 4.3 yet take it to best buy that has a samsung center and just tell them samsung sent you here because my phone all of a sudden was acting up and they will flash it back to factory for you thats what i had to do

gtj0 said:
OK, If you're stuck with an incomplete flash, here are some steps you can try to get to MJ9...
These instructions assume you started with MJ6.
First, make sure you can boot into recovery. If not, download and apply the MJ6 recovery.
recovery-mj6.tar.md5
It should apply without error. If not, report the failure.
Download and extract the following files...
mf3-emergency-part-1.tar.md5.7z
mf3-emergency-part-2.tar.md5.7z
If you don't already have it, download the mf3-mj9 update file...
update-mf3-mj9.zip
Start Odin, connect your phone and boot into Download mode.
Flash mf3-emergency-part-1.tar.md5 which contains modem.bin, NON-HLOS.bin and system.img.ext4.
The flash of system.img.ext4 WILL FAIL at the end. That's OK.
Reboot the phone back into Download mode and restart Odin.
Flash mf3-emergency-part-2.tar.md5 which contains cache.img.ext4.
The flash WILL FAIL at the end. That's OK.
The phone should now reboot to recovery by itself and apply a small update. If it fails, stop and report.
The phone should now reboot to a black screen with the pulsing notification LED.
Reboot into recovery mode and flash update-mf3-mj9.zip. I recommend sideloading instead of flashing from sdcard because the sdcard method reboots the phone whether the update was successful or not and you lose the error messages.
Reboot the phone and let it initialize.
You should now have MJ9.
Click to expand...
Click to collapse
download the above files except update-mf3-mj9.zip and replace with MF3>MK2 from this thread
http://forum.xda-developers.com/showthread.php?t=2573080
Hashcode has a Beta safesatrap for MK2 Safestrap-JFLTEATT-3.70-B01 if you want to flash anything to a rom slot or stock slot and make a backup (does not work with EXFAT formatted sd yet)
http://forum.xda-developers.com/showthread.php?t=2448925

dolph8886 said:
download the above files except update-mf3-mj9.zip and replace with MF3>MK2 from this thread
http://forum.xda-developers.com/showthread.php?t=2573080
Hashcode has a Beta safesatrap for MK2 Safestrap-JFLTEATT-3.70-B01 if you want to flash anything to a rom slot or stock slot and make a backup (does not work with EXFAT formatted sd yet)
http://forum.xda-developers.com/showthread.php?t=2448925
Click to expand...
Click to collapse
I was on MK2 using the 3.7 beta of SS when I couldn't get it to boot anymore. Tried the modified method outlined above, everything worked except after step 7, it never rebooted to recovery on it's own and installed a small update. Decided to try Kies, says it can do emergency firmware recovery but it hasn't worked yet. Any help would be appreciated as I'm not sure I can get the handset replaced since I got it at Walmart.

It may not automatically reboot into recovery, just make it.
if you do not already know this (i am not saying you don't)
holding the power button for 10? seconds will reboot phone or using the file in post below
http://forum.xda-developers.com/showpost.php?p=48621760&postcount=18
hold volume up and power the phone on to boot into stock recovery
have android sdk and files above ready
choose option to sideload update from adb
open terminal on computer and
adb sideload "update.zip"
without quotes
here are basically the same instructions just a bit different
sl1200md3 said:
Back on AT&T STOCK MK2 from a bricked TWRP'd install. I had to do the following:
1) Phone into download mode
2) Flash mf3-emergency-part-1.tar.md5 via Odin v1.85
3) Force Reboot
4) Flash mf3-emergency-part-2.tar.md5
5) Unplug phone / Reset Odin / plug phone back in
6) Flash recovery-mj6.tar.md5
7) Force Reboot in Odin using this file http://forum.xda-developers.com/showthread.php?t=1766399 Thanks kevinpc :good:
8) Manually enter recovery
9) ADB Sideload the file: update-mf3-mj9.zip found here: http://forum.xda-developers.com/showpost.php?p=47604388&postcount=152
10) ADB Sideload the file: update-MJ9-MK2.zip found here: https://docs.google.com/file/d/0B2iXrnZBB-MVYkYwNkYzU2FJaFk/edit
11) Reboot
Won't be flashing TWRP via Goo Manager again any time soon.
:good::good::good:
Click to expand...
Click to collapse

dolph8886 said:
It may not automatically reboot into recovery, just make it.
if you do not already know this (i am not saying you don't)
holding the power button for 10? seconds will reboot phone or using the file in post below
http://forum.xda-developers.com/showpost.php?p=48621760&postcount=18
hold volume up and power the phone on to boot into stock recovery
have android sdk and files above ready
choose option to sideload update from adb
open terminal on computer and
adb sideload "update.zip"
without quotes
here are basically the same instructions just a bit different
Click to expand...
Click to collapse
You sir, are amazing. What you posted was just different enough from what I had previously tried to work. I'm now booting and on MK2, thanks a million man!

FINALLY
dolph8886 said:
download the above files except update-mf3-mj9.zip and replace with MF3>MK2 from this thread
http://forum.xda-developers.com/showthread.php?t=2573080
Hashcode has a Beta safesatrap for MK2 Safestrap-JFLTEATT-3.70-B01 if you want to flash anything to a rom slot or stock slot and make a backup (does not work with EXFAT formatted sd yet)
http://forum.xda-developers.com/showthread.php?t=2448925
Click to expand...
Click to collapse
FINALLY LONG SEARCH OVER FOR THIS FIX JUST ONE QUESTION WILL THE RECOVERY FAIL AS WELL?

tonyc0642 said:
You sir, are amazing. What you posted was just different enough from what I had previously tried to work. I'm now booting and on MK2, thanks a million man!
Click to expand...
Click to collapse
hi i have the exact same problem....i dont know how to start adb on windows 7...arrgh...

Thanks to the everyone for this
It saved my ass..I put the zips on a sd and installed.Back on mk2 and rooted.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

I tried the above mentioned but after I flash the second file and reboot, it goes into kies , no recovery mode. Odin is still available. Also thanks for all the quick responses fellas yall are the best.
***UPDATE*** flashed the recovery but the sideload failed. Tried to turn it on and the Samsung lolgo came on, then went black. After a a few minutes the phone pops up on the computer and I can access the internal phone memory and the sd card.

I am really not sure, I believe that it will work if you do this process again.
No Idea if this makes any difference but, pay close attention to the process at least until the sideloading of the update.
Do not let the device attempt to boot with this firmware mismatch as this may cause issues. (This is the only conclusion I can come to as this process does work)
If the device automatically reboots then press and hold volume up to enter recovery or volume down to enter download mode.
If manual reboot or powering on then press and hold volume up or down respectively then press power until the device starts and release power button to avoid a reset.

SOLVED!!!
Thank you so much @dolph8886!!!1 You are the BEST!!! :good: :victory: :highfive:

This helped me, fixed my softbrick, hope this helps! Remember to thank the author if it works
http://forum.xda-developers.com/showthread.php?t=2621279

ok here it goes i tried to flash twrp using goo but now i have no stock recovery can someone help me please im on mk2 running 4.3 and rooted

[Q] Several root attempts - will not move from stock recovery!

So
I have been struggling a couple of hours with this issue: Trying to root my samsung galaxy s4 i 9505, with three different odin versions (now last tried v.1.85) and both CWM and TWRP. I finally managed to get a pass from odin, but whenever I go into recovery mode on my phone, I am at the stock recovery "page", saying Android recovery on the top. Which must mean that I am not rooted.
I have no idea what to do, anyone there with some tricks up their sleeves?

snorre89 said:
So
I have been struggling a couple of hours with this issue: Trying to root my samsung galaxy s4 i 9505, with three different odin versions (now last tried v.1.85) and both CWM and TWRP. I finally managed to get a pass from odin, but whenever I go into recovery mode on my phone, I am at the stock recovery "page", saying Android recovery on the top. Which must mean that I am not rooted.
I have no idea what to do, anyone there with some tricks up their sleeves?
Click to expand...
Click to collapse
1. Reflash Stock Rom.
2. Root your phone with latest version of ODIN following this GUIDE or you can:
- Download and unzip this FILE in your pc.
- Take your device in DOWNLOAD MODE.
- Flash it via ODIN.
3. Install SUPERSU of Play Store app if you don't see it in desktop of your device.
4. Reboot in DOWNLOAD MODE and flash TWRP via ODIN. Your phone will reboot or reboot manually.
5. Done, your have root and custom recovery installed. Good luck :highfive:

Joku1981 said:
1. Reflash Stock Rom.
2. Root your phone with latest version of ODIN following this GUIDE or you can:
- Download and unzip this FILE in your pc.
- Take your device in DOWNLOAD MODE.
- Flash it via ODIN.
3. Install SUPERSU of Play Store app if you don't see it in desktop of your device.
4. Reboot in DOWNLOAD MODE and flash TWRP via ODIN. Your phone will reboot or reboot manually.
5. Done, your have root and custom recovery installed. Good luck :highfive:
Click to expand...
Click to collapse
Cheers for your reply, unfortunately I haven´t gotten longer than the first step. I try to flash stock rom, but it seems like i need a pit file and i cannot find a working one anywhere around the internet. Is there some way to find the pit file stored in my phone? Or another place where I can find a working pit file other than the one called CSB_signed_Fusion3_EUR_0325_V2?
Edit: Now I successfully reflashed stock rom and installed CWM recovery. Problem is that whenever I try to flash a rom I get the message "installation aborted".
What to do?