Database Users

[Q] Dead Milestone 2 - Same problem, different issue

My MS2 started acting weird over the weekend, with many force closes and 3G conectivity issues.
I received a call, and after it the phone crashed and on restart it got stuck on a loop at the blur animation.
After that I tried turning on with the X pressed, cleared cache + wipe.
Still on boot loop.
My next step was to flash another SBF file (Brazillian SBF) using the RDS 4.9 on my win7 x64
it wouldnt recognize my MS2 (turned on with up arrow)
I am now trying on a XP windows. It recognizes the phone, start flashing but I keep getting a Code 32 checksum error.
I tried downloading the SBF from another source, but I still get the same problem.
is there any hope?
why do I keep getting this checksum error?

I've turned on the logging now.
this is what I'm getting:
14:53:51, March 14, 2011
Line: 527
ERROR: AP Die ID: 237001055bf45e010000d8ff0100
14:53:51, March 14, 2011
Line: 534
ERROR: BP Die ID: 0000000000000000000000000000
14:53:51, March 14, 2011
Line: 541
ERROR: AP Public ID: 38607a9e7df8020ec7cca49460878683e6aaa390
14:53:51, March 14, 2011
Line: 548
ERROR: BP Public ID: 0000000000000000000000000000000000000000
14:57:43, March 14, 2011
Line: 1309
ERROR: Phone[0000]: Error verifying Code Group 32 checksums. File: 0x65A6, Phone: 0x67A6
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashOp.cpp
Device ID: 0
14:57:44, March 14, 2011
Line: 1309
ERROR: Phone[0000]: Error verifying Code Group 33 checksums. File: 0x4C1B, Phone: 0x4E1B
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashOp.cpp
Device ID: 0
14:58:08, March 14, 2011
Line: 1309
ERROR: Phone[0000]: Error verifying Code Group 39 checksums. File: 0xA01, Phone: 0xC872
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashOp.cpp
Device ID: 0
14:58:08, March 14, 2011
Line: 1309
ERROR: Phone[0000]: Error verifying Code Group 40 checksums. File: 0xFDFF, Phone: 0x4A65
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashOp.cpp
Device ID: 0
14:58:08, March 14, 2011
Line: 1309
ERROR: Phone[0000]: Error verifying Code Group 45 checksums. File: 0x6C96, Phone: 0x6E96
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashOp.cpp
Device ID: 0
14:58:20, March 14, 2011
Line: 1309
ERROR: Phone[0000]: Error verifying Code Group 66 checksums. File: 0x3C24, Phone: 0x2C0E
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashOp.cpp
Device ID: 0
14:58:20, March 14, 2011
Line: 1190
ERROR: Phone[0000]: Flash failed.
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
14:58:20, March 14, 2011
Line: 597
ERROR: Flash failure: Phone[0000]: Error verifying Code Group 32 checksums. File: 0x65A6, Phone: 0x67A6 (Error Code: 31),
Detailed Error Details: Direction of the Error=No Direction, Command Value=4000000, Code Group Number=32
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0

Cant flash to stock using RSD

I have the SBF I need and have tried RSD to go back to stock from the leaked GB but I get an error shown below. I followed the installation instructions to the letter, in admin mode, Anybody else seen this before and know how to get around it?
This is what I get :
10:49:11, March 28, 2011
Line: 235
ERROR: Phone[0000]: Phone is not compatible with multi-interface super-file.
File: D:\test_dev_usb\flash\code\flashdll\MIFlash.cpp
Device ID: 0
10:49:11, March 28, 2011
Line: 1183
ERROR: Phone[0000]: Flash failed.
File: D:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp
Device ID: 0
10:49:11, March 28, 2011
Line: 587
ERROR: Flash failure: Phone[0000]: Phone is not compatible with multi-interface super-file. (Error Code: 3b),
Detailed Error Details: Direction of the Error=No Direction, Command Value=0, Code Group Number=No Codegroup
File: D:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0
10:50:23, March 28, 2011
Line: 235
ERROR: Phone[0000]: Phone is not compatible with multi-interface super-file.
File: D:\test_dev_usb\flash\code\flashdll\MIFlash.cpp
Device ID: 0
10:50:23, March 28, 2011
Line: 1183
ERROR: Phone[0000]: Flash failed.
File: D:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp
Device ID: 0
10:50:23, March 28, 2011
Line: 587
ERROR: Flash failure: Phone[0000]: Phone is not compatible with multi-interface super-file. (Error Code: 3b),
Detailed Error Details: Direction of the Error=No Direction, Command Value=0, Code Group Number=No Codegroup
File: D:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0

Help, failed flashing 4.1.6 :/

Here's the error log:
01:48:11, March 31, 2011
Line: 340
ERROR: Interface AP-OS: Error flashing subscriber unit. Device API Error: 0xE0020090 Address: 0x2000 Command: BIN
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashOp.cpp
Device ID: 0
01:49:09, March 31, 2011
Line: 1190
ERROR: Phone[0000]: Flash failed.
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
01:49:09, March 31, 2011
Line: 597
ERROR: Flash failure: Interface AP-OS: Error flashing subscriber unit. Device API Error: 0xE0020090 Address: 0x2000 Command: BIN (Error Code: e0020090),
Detailed Error Details: Direction of the Error=3000, Command Value=300000, Code Group Number=2
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0
This was after installing Gingerblur. Tried to flash back to stock ROM to get the OTA update but couldn't complete it. Please help, thanks!

[Q] DX Bricked

Okay so as I was trying to put CM7 on my DX all was looking good until the reboot. After the reboot it goes right to the bootloader screen. I have tried resetting the phone multiple times. Still no joy. Below is what I have found, tried and errors that I am getting. Please help.
Errors on Bootloader Screen: A5, 69, 35, 00, 27
Tried to SBF back to stock GB and RSD doesn't work. Error: 0x7029
I did find a link link to remedy the issue but am unable to post it. I have tried literally everything that I can think of.
Which didn't work at all. Below is the error log in rsd.
16:52:50, June 15, 2011
Line: 1626
ERROR: Chipset type 50 is not supported.
File: D:\test_dev_usb\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
16:52:50, June 15, 2011
Line: 1626
ERROR: Chipset type 43 is not supported.
File: D:\test_dev_usb\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
16:53:52, June 15, 2011
Line: 2187
ERROR: Device S Flash OMAP3630 MI is not supported.
File: D:\test_dev_usb\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
16:53:52, June 15, 2011
Line: 1024
ERROR: Phone[0000]: Unable to retrieve initialization values from INI file.
File: D:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
16:53:52, June 15, 2011
Line: 523
ERROR: Unable to retrieve initialization values from INI file.
File: D:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0
Now to sum it all up. I have the latest drivers, I have tried reinstalling the drivers, I have tried reinstalling rsd lite three times, pulled battery, and looked around. If there is something I am missing please tell me. Any help is appreciated. Thanks XDA.

lilb3119 said:
Okay so as I was trying to put CM7 on my DX all was looking good until the reboot. After the reboot it goes right to the bootloader screen. I have tried resetting the phone multiple times. Still no joy. Below is what I have found, tried and errors that I am getting. Please help.
Errors on Bootloader Screen: A5, 69, 35, 00, 27
Tried to SBF back to stock GB and RSD doesn't work. Error: 0x7029
I did find a link link to remedy the issue but am unable to post it. I have tried literally everything that I can think of.
Which didn't work at all. Below is the error log in rsd.
16:52:50, June 15, 2011
Line: 1626
ERROR: Chipset type 50 is not supported.
File: D:\test_dev_usb\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
16:52:50, June 15, 2011
Line: 1626
ERROR: Chipset type 43 is not supported.
File: D:\test_dev_usb\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
16:53:52, June 15, 2011
Line: 2187
ERROR: Device S Flash OMAP3630 MI is not supported.
File: D:\test_dev_usb\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
16:53:52, June 15, 2011
Line: 1024
ERROR: Phone[0000]: Unable to retrieve initialization values from INI file.
File: D:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
16:53:52, June 15, 2011
Line: 523
ERROR: Unable to retrieve initialization values from INI file.
File: D:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0
Now to sum it all up. I have the latest drivers, I have tried reinstalling the drivers, I have tried reinstalling rsd lite three times, pulled battery, and looked around. If there is something I am missing please tell me. Any help is appreciated. Thanks XDA.
Click to expand...
Click to collapse
I had to flash the FULL sbf and reroot and Install the 2 part zip to get back to GB. The FUll sbf should work, but if it fails try doing the system only after.

Can anyone help him out?
I refuse to believe he's the only one who's had this issue.

lilb3119 said:
Okay so as I was trying to put CM7 on my DX all was looking good until the reboot. After the reboot it goes right to the bootloader screen. I have tried resetting the phone multiple times. Still no joy. Below is what I have found, tried and errors that I am getting. Please help.
Errors on Bootloader Screen: A5, 69, 35, 00, 27
Tried to SBF back to stock GB and RSD doesn't work. Error: 0x7029
I did find a link link to remedy the issue but am unable to post it. I have tried literally everything that I can think of.
Which didn't work at all. Below is the error log in rsd.
16:52:50, June 15, 2011
Line: 1626
ERROR: Chipset type 50 is not supported.
File: D:\test_dev_usb\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
16:52:50, June 15, 2011
Line: 1626
ERROR: Chipset type 43 is not supported.
File: D:\test_dev_usb\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
16:53:52, June 15, 2011
Line: 2187
ERROR: Device S Flash OMAP3630 MI is not supported.
File: D:\test_dev_usb\flash\code\flashdll\FlashCharacteristics.cpp
Device ID: 0
16:53:52, June 15, 2011
Line: 1024
ERROR: Phone[0000]: Unable to retrieve initialization values from INI file.
File: D:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
16:53:52, June 15, 2011
Line: 523
ERROR: Unable to retrieve initialization values from INI file.
File: D:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0
Now to sum it all up. I have the latest drivers, I have tried reinstalling the drivers, I have tried reinstalling rsd lite three times, pulled battery, and looked around. If there is something I am missing please tell me. Any help is appreciated. Thanks XDA.
Click to expand...
Click to collapse
Use the full sbf. There's two flavors of sbf files, a system file and a full. Find the other one and you should be fine. I've had this problem and that's how I fixed it.

Save yourself some trouble and trying sbfing it was linux. sbf_flash works wonders.

Flashing failes everytime I try to flash. Rsdlite error included

This was my first time.
I did all what was required.
But when I started the flash through RSD lite after just 1 min it showed me FAIL
It went from 1% to 100% once, and then it showed FAIL
Now when I unplugged the USB and remove the battery and insert it back again it automaticaly goes into bootloader and then I tried to flash again which gave me same result.
This is my phone status.
The screen shows
Code Corrupt
Battery OK
OK to Program
Trasnfer Mode:
USB
This is what the Rsdlite Error log file has.
22:32:29, May 13, 2012
Line: 537
ERROR: AP Die ID: 1140010e560368010000dcff0200
22:32:29, May 13, 2012
Line: 544
ERROR: BP Die ID: 0000000000000000000000000000
22:32:29, May 13, 2012
Line: 551
ERROR: AP Public ID: 785fdd0a961a8e4b1e6a0497d703ee271d20c5c0
22:32:29, May 13, 2012
Line: 558
ERROR: BP Public ID: 0000000000000000000000000000000000000000
22:32:29, May 13, 2012
Line: 709
ERROR: Phone[0000]: Error erasing subscriber unit. Device API Error: 0xE0030040 Command: ERASE
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\ErasingOp.cpp
Device ID: 0
22:32:29, May 13, 2012
Line: 1195
ERROR: Phone[0000]: Flash failed.
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
22:32:29, May 13, 2012
Line: 610
ERROR: Flash failure: Phone[0000]: Error erasing subscriber unit. Device API Error: 0xE0030040 Command: ERASE (Error Code: e0030040),
Detailed Error Details: Direction of the Error=2000, Command Value=100000, Code Group Number=No Codegroup
File: D:\GitProjectsReleases\hdt_windows_flash\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0
Click to expand...
Click to collapse
Please someone reply asap.

use the recommened rsdlite version...i have seen many other version of rsdlite gives such errors..i actually dont remember the exact version ..haven't used it for a while..
do a search in this forum..
All the best

I have read few other places and it said to use RSDLITE 4.9, which I did.

try version 3.4.8 if m not wrong..

Which one do you used for flashing?

i think the above version only..i have recommended the same version to many people and it works like a charm in past..search this forum for rsdlite stable version by experience of people..

I did successfully flash my Defy+ with RSDLite v5.6 (search the forum or google)
Maybe there's something wrong with your sbf-file? Just a wild guess, don't know if the error message tells actually something different...

Thanks for your time guys. I was trying to flash on my Desktop with no avail.
Tried on my lappy and Bingo its all done perfectly.
Happy I have finally upgraded to CM7 its really nice and fast.