Related
Hello together,
i've got some problem with my htc hd2.
first a few facts:
my actual winmo rom is the cookie energy rom build 21916 (german)
my radio rom is 2.14.50.04
my hspl is 2.08 from cotulla
my android rom is mdeejay froyo v3.3 with hastarin 7.1
now the problem...
when i try to start android (first clrcad then haret) the boot loader shows a few lines. the last is "jumping to kernel"
then after a few seconds these lines vanish and there is black screen.
only way to reboot is to remove the battery.
i've got a 8gb san disk microsd...
before installing the winmo rom and android rom i erased my htc with task29 and formatted the microsd with fat32.
i also tried different winmo and android roms but theres always the same error...
plz help me
thanks
any suggestions?
I have the same problem!!!!!!!!!!!!!!
I´m working on it for 2 weeks now!!!!!!!But i get no results!!!
I tested it with differet sd-cards, many ROM´s... no chance its everytime the same!!!!
Then i tested it on the HD2 from my brother! he has the same ROM, same Radio same HSPL...
and it works on evry of my SD Cards!!!!!!! WHYYY???
Please need Help!!!!!!!!!
PS: Wenn du das Problem gelöst hast bitte schreib mir!!!
boot error
Use the the chucky rom , I have no issues with this rom.
Does your windows mobile report 576MB memory in hardware information screen? Is it possible that you have a 320MB prototype/pre-release hd2s maybe? Normally all hd2s except pre-release models have 576MB physical ram. European models are capped at 448MB unless you update your radio and rom. But pre-release models will still have 320MB and unfortunately won't be able to boot android even if you edit android memory settings. (Cotulla says, even if you are able to run, it will be buggy and laggy)
Note: I am not talking about free memory. I am talking about the full memory reported in hardware information page in winmo.
My HD2 is from Vodafone and 3 month´s now. i hava a gotrip ROM (5.9) on it now with 546 RAM.
The older Android builds worked for a while!!!
same problem
HELLLLLP!!! I really want to try this out but it seems that my HD2 won't load it. i'm running energy rom and I've flashed android on this phone before. I've hard reseted my phone as well as reformated my SDcard but when every I go to launch harret, the linux screen pops up and the lettering (about two lines with no penguin logo) changes to a pinkish color and the next screen is a white screen with HTC on it. I don't know what to do. and now it seems I cant load any version of Android on it.
im having the problems as you people
but the thing with me is that, andriod use to boot but later on when i installed the stock rom and went back to the energy rom it just wont boot :'(
xasp said:
Hello together,
i've got some problem with my htc hd2.
first a few facts:
my actual winmo rom is the cookie energy rom build 21916 (german)
my radio rom is 2.14.50.04
my hspl is 2.08 from cotulla
my android rom is mdeejay froyo v3.3 with hastarin 7.1
now the problem...
when i try to start android (first clrcad then haret) the boot loader shows a few lines. the last is "jumping to kernel"
then after a few seconds these lines vanish and there is black screen.
only way to reboot is to remove the battery.
i've got a 8gb san disk microsd...
before installing the winmo rom and android rom i erased my htc with task29 and formatted the microsd with fat32.
i also tried different winmo and android roms but theres always the same error...
plz help me
thanks
Click to expand...
Click to collapse
i got my andriod to work
this is how i did it ...
1) make sure you format your SD card using this software www(dot)sdcard(dot)org/consumers/formatter/sdfv2000(dot)zip and make sure its NOT a quick format
2) make sure your radio is around Leo_RADIO_2.12.50.02_2
3) follow this guide www(dot)forum(dot)xda-developers(dot)com/showthread(dot)php?t=732380
(replace the "(dot)" with "." for the URL to work)
hope this help ( by the way i was writing this whilst booting my andriod and it works =) )
xasp said:
Hello together,
i've got some problem with my htc hd2.
first a few facts:
my actual winmo rom is the cookie energy rom build 21916 (german)
my radio rom is 2.14.50.04
my hspl is 2.08 from cotulla
my android rom is mdeejay froyo v3.3 with hastarin 7.1
now the problem...
when i try to start android (first clrcad then haret) the boot loader shows a few lines. the last is "jumping to kernel"
then after a few seconds these lines vanish and there is black screen.
only way to reboot is to remove the battery.
i've got a 8gb san disk microsd...
before installing the winmo rom and android rom i erased my htc with task29 and formatted the microsd with fat32.
i also tried different winmo and android roms but theres always the same error...
plz help me
thanks
Click to expand...
Click to collapse
-did you put "nand_boot=0" i think on your startup.txt?
Sent from my HTC HD2 using XDA App
apeatan said:
-did you put "nand_boot=0" i think on your startup.txt?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
yes "nand_boot=0" is in the startup.txt
same problem did everything been running android bfore jus thought i try a diffrent one now i cant get none to work
My HD2 has:
RAM size:448Mb
Flash size: 512Mb
Storage size:180,11Mb
And I have same problem.
Can't instal Mdeejay Android.
What to do? To give up?!?!
Should I change ROM & Radio? Now I have shiped rom.
Is this can change something?
I had the exact same problem. Been trying 1000s of ways to fix it but no help. Cant ever get android to load again. Im hoping the nand version build will work.
Fixed all today.
Must have compatibile radio + rom.
What loader to use if I want to use only android ?
alias_scg said:
Fixed all today.
Must have compatibile radio + rom.
What loader to use if I want to use only android ?
Click to expand...
Click to collapse
alias_scg, what Radio + ROM did you use to fix it?
I've been having this problem over 3 weeks and I finally found the post with similar behavior with my HD2.
Now, I'll try 2.12.50.02_2 meanwhile for mdeejay.
I'd been using all suggested ROM and Radio from those chef's original posts, though.
I also got this weird problem... having stock rom/radio whatever.. just got the phone yesterday... but will try a other rom+radio etc. and see if that works
EDIT:
Ok guys i also got this fixed...
I upgraded my radio + rom and then it worked all fine!
HELP!
I am having the exact same problem as the rest of you's,
has anyone managed to find a fix.
My rom is still the official telstra rom, so maybe thats the problem ?
NLCandyman said:
I also got this weird problem... having stock rom/radio whatever.. just got the phone yesterday... but will try a other rom+radio etc. and see if that works
EDIT:
Ok guys i also got this fixed...
I upgraded my radio + rom and then it worked all fine!
Click to expand...
Click to collapse
Which rom + radio package did you use?
Paste link to thread please.
Hi, this is my first post on this forum so first of all I would like to appolagise for all the things I've either just done wrong, or am about too....
I am trying to install android on to my phone, I am on the stock rom but have succsesfully installed HSPL3 and radio version 2.11.50.20.
I have tried a few builds of Android but allways have one of 2 results.
Once I've run clrcad followed by harlet, it tells me I'm booting to linux. The screen then goes black, it runs about 8 lines of code, stops there and changes to a black screen with a green HTC. Where it remains indefinatly.
A friend with anouther HD2 has android working fine on his device, and altho he has a custom rom he tells me its not essential, as ive read up on the potential risks I would rather stick with the stock but will change if thats whats causing the problem.
I would really appreciate some suggestions, thanks in advance for your time and help.
Peter
forgot to add, the second result is the screen going blue indefinatly, which I presume from my extensive knowledge.........lol is a blue screen of death
upgrade your radio, im on 2.12.50, and the newest is 2.15.50
also, try a modded windows mobile rom, i use standard energy with no issues.
also, make sure you only have that one android build on your SD card. and that it's a new build, not an ancient one. (check http://android.hd2roms.com/)
you shouldnt have any more issues.
Thanks for the advice, unfortunatly before seeing your post I uprgraded too chuckeys rom, not energy, but get the exact same error... Leads me to beleive the problem is elsewhere. Will keep trying tho hope its worth it.
Jai meme problme mon rom est miri hd2 v_18.0 wwe ? Radio 2.15.50.14 ?
Same problem here, tried to change my wm rom and didn't work. I'm looking tonight if I can find a solution...
A little disclaimer
I will not be for any damage that may be caused to your device, HSPL remove warranty so be carefull. Don't forget to have more than 50% of battery remaining before the process !
So, maybe here is the solution:
I've try again with differents roms, changing my wm rom etc. and nothing works.
But, at the end I've change my radio rom to Leo_RADIO_2.12.50.02_2 found here http://forum.xda-developers.com/showthread.php?t=611787
Then installed Chucky GTX Lite rom found here http://forum.xda-developers.com/showthread.php?t=618787
And to finish I've installed the bootloader and download MDJFroYoRevolution 1.4 with android 2.2
I've use the 512 Data img too (just unzip your MDJFroYoRevolution, take the 512 or 1Go file and put this file on your Android root.) isn't necessary but takes less time to work first time.
After that still not working so I managed to try to remove all files from my sd card (2Go only) and I put on ONLY MDJFroYoRevolution 1.4+512Mo Data img !
Then after 10mn~ it works !
I think the bug is only because sd card haven't enough space to create all files so the HTC logo stuck and no error message appear.
Don't forget to install the bootloader on your memory internal storage! and not the on the sd card!
Good luck everyone and I hope it will help.
ps: sorry for my english hope you understand anything
Having the same problem here. I've tried different versions of WM, different Android builds, updated the latest radio rom, all without success.
Strange thing is though that Android boots the first few times, but after resetting it more than about three times it gets stuck on the black screen with the HTC letters in the middle. The only way to get it running again is reformatting my SD card (8G). Only thing on it is the Mdeejay Froyo Sense v2.3 Clean...
Solution for the freeze screen after second boot
I put android not in the root directory but in a \Android directory on the SD CARD.
of course, I add set cmdline "rel_path=Android" in the Startup.txt file and now i can reboot my phone when i want.
Ghirt said:
Having the same problem here. I've tried different versions of WM, different Android builds, updated the latest radio rom, all without success.
Strange thing is though that Android boots the first few times, but after resetting it more than about three times it gets stuck on the black screen with the HTC letters in the middle. The only way to get it running again is reformatting my SD card (8G). Only thing on it is the Mdeejay Froyo Sense v2.3 Clean...
Click to expand...
Click to collapse
exactly the same issue here
ROM: Energy build 28244
Radio: 2.15.50.14
Android: MDJ FroYo Sense Clean v. 2.4
Having same issue.
Energy Rom
Just reformatted MS
Hspl 2.08
radio 2.15.50.4
htc desire android build
getting same green htc screen.
icemanscion said:
Energy Rom
Just reformatted MS
Hspl 2.08
radio 2.15.50.4
htc desire android build
getting same green htc screen.
Click to expand...
Click to collapse
Do you got this issue at the first boot or after few reboots as Ghirt and I have ?
peterbeer said:
Hi, this is my first post on this forum so first of all I would like to appolagise for all the things I've either just done wrong, or am about too....
I am trying to install android on to my phone, I am on the stock rom but have succsesfully installed HSPL3 and radio version 2.11.50.20.
I have tried a few builds of Android but allways have one of 2 results.
Once I've run clrcad followed by harlet, it tells me I'm booting to linux. The screen then goes black, it runs about 8 lines of code, stops there and changes to a black screen with a green HTC. Where it remains indefinatly.
A friend with anouther HD2 has android working fine on his device, and altho he has a custom rom he tells me its not essential, as ive read up on the potential risks I would rather stick with the stock but will change if thats whats causing the problem.
I would really appreciate some suggestions, thanks in advance for your time and hel
Peter
Click to expand...
Click to collapse
Always use the custom winmo Rom sugested by the Android Builder. Simple as. The myth of "Stock ROM will be sufficient" should end
Peter[/QUOTE]
Same problem!!
Ive updated my radio to: 2.15.50.14
tried 3 roms.
before installing radio - I had the Kernal problem.
and now I have the black screen with green htc.
has anyone found a solution?
is their something that im not doing?
thanks!
jigners said:
Always use the custom winmo Rom sugested by the Android Builder. Simple as. The myth of "Stock ROM will be sufficient" should end
Peter
Click to expand...
Click to collapse
[/QUOTE]
Not true. I've installed on a couple of peoples HD2's using the latest stock WWE rom with radio 2.15. It does work, and it works very well.
I'm not saying you shouldn't use custom roms, that is everyone's prerogative (as you can see from my sig I use VBN's rom and it's perfect for me).
Try to move a folder called Android from sd card to another folder or delete it and it should help. It worked in my case. Good luck!
has someone hear find an answer?
given up
I have tried many combos and radios and still stucked at green htc loading logo now i am just hoping for nand. strange thing its the volume down and end does not bring bootloader anymore.
Hi, I need some help from you guys, I'm a noob in these things, anyway I was on Windows mobile 6.5 (Not a T-mobile) , and thought about changing into an android. I found some tutorials on youtube, and tryied to do It exactly as It said. Ok, so I found this video on youtube with a link on It, I clicked It, which directed me to one website. I installed the Hard HSPL folowing the instructions, then It said to install a Windows Mobile ROM, I downloaded and installed "Chucky Droid Rom" and now my phone Is like in between the Windows and Android, some kind of weird screen like theres no OS on it. Then it says to download and put Android Rom into my SD card, after downloading "FroyoStone_Sense_V2", I also deleted everything from the SD card except the Android directory. After i push CLRCAD, I start "haret", but it just shows me very little text on top of the screen, which fades away in like 5 seconds. After that i get "Sleep of Death" the screen just keeps black, unless i restart my phone. I tryied to wait for like 40minutes hoping it will start somehow, but the situation didn't change... So can somebody please help me? How do i boot my phone to android, what should I do to get that penguin with a lot of flashing text on my phone instead of this "Sleep of Death" What am I doing wrong? Thanks for answer guys.
What is your intention with running Android, do you just want to experiment with it and use it as a dual boot, ie still have winmo and then boot to Android, or would you like to replace winmo with Android? If the first option, then you will need to flash a full winmo rom as AFAIK ChuckyDroid is an extremely light rom that basically just allows you to boot to an Android rom.
If your intention is to only run Android then you should be looking at the NAND Android roms as this replaces winmo totally and the phone boots straight to Android. If you would like to do this, then follow the link in my signature on Flashing NAND roms, it is a very good tutorial and gives you step by step instructions on what to do.
Does it work on European HD2? Because i think i have the problem, because my HD2 is not a T-mobile and i did everything as it said step by step, which would give directions for a T-mobile. I think thats the issue to the problem...
Vettelis said:
Does it work on European HD2? Because i think i have the problem, because my HD2 is not a T-mobile and i did everything as it said step by step, which would give directions for a T-mobile. I think thats the issue to the problem...
Click to expand...
Click to collapse
The process is practically the same the only difference is that with NAND TMOUS get more storage then EU HD2, unless you have EXT partition on SD card. Anyway what radio are you currently running this could be why android wont run off SD card.
Ricey
Thanks for the help guys, after I installed the correct radio it works perfectly.
Hi all - I'm in a bit of trouble.
Tried changing the OS to Android and must have made a mistake somewhere along the line.
Was using ROM update utility MAGDLR V1.13 and got as far as updating the ROM Was told that the screen should go black and if it didn't, then I needed to perform a reset.
I did this and now the screen just shows the htc logo on white background.
Irish phone - got it august '10. recently upgraded ROM from HTC site to version 3.14.405.2 but not sure now whether I've wrecked it completely.
Was just sick of WinMo and wanted a change - can anyone help please?
ND
boot into bootloader and start again. do you have hspl? right radio?
get into bootloader. flash magldr. then flash nandroid.
you probably need to downgrade the rom to get to hspl 2.08
Thanks - I got the correct HSPL and installed it on the phone, that part was fine. The problem now is that the handset isn't even acknowledging when it's plugged in. And when I connect via USB, the computer isn't registering any connection to it.
I think it's toast! The only thing I can see is a white background with green htc lettering i.e. welcome screen
Thanks for getting back to me, any other ideas?
Will I be able to reload original windows back on by myself?
Try windows 7 XP sucks doing this kind of stuff
Sent from my Nexus One using XDA App
ndonovan said:
...The only thing I can see is a white background with green htc lettering i.e. welcome screen...
Thanks very much for the response. As above, the handset is completely unresponsive - it's not even showing a "charge" when plugged in.
Any help greatly appreciated
Many thanks
Signed,
Cracking up
Click to expand...
Click to collapse
Can you get to bootloader?
(power on while holding vol. down)........
If so, get to bootloader then connect via usb. The word serial at the bottom of the screen should change to USB. This sometimes takes a few minutes (for me anyway)
Once it reads "USB" flash a WM6.5 Rom in the usual way.......
If you cant get to bootloader then theres a good chance you've somehow borked your device......
Thanks everyone and in particular jsmmcabe and conantroutman
I got into bootloader and I'm trying to reinstall the windows os from there.
will let you know how I get on,
thanks again guys - lifesavers
I should have mentioned that flashing a stock 6.5 rom will wipe HSPL.
If you flash a stock rom then you will need to reinstall HSPL before attempting any MAGLDR/NAND shenanigans... (sheNANDigans?? see what I did there )
If you flash a custom ROM from XDA then your HSPL will be ok......
Also should have mentioned the age old "NO .51. radios on a tmous" advice.........
Good luck.......
Well after all of that I went to Pirate Bay, downloaded an Android 2.2 file, copied it onto my SD card and ran it.
Hey presto, I have an Android Phone!
I cannot begin to tell you how much better it is. It's fast, it doesn't freeze, the whole interface is much cleaner and easier to use.
SNAG ITEM:
Tried doing the same with a friends phone and when activating the copied files from the SD card, the thing just hangs and I have to reset the phone.
Any idea why it worked on mine and not his?
Same phone, bought in Ireland, a week apart. Different mobile operator networks though..... I'm Vodafone, he's O2 - weird, no?
ndonovan said:
Well after all of that I went to Pirate Bay, downloaded an Android 2.2 file, copied it onto my SD card and ran it.
Hey presto, I have an Android Phone!
I cannot begin to tell you how much better it is. It's fast, it doesn't freeze, the whole interface is much cleaner and easier to use.
SNAG ITEM:
Tried doing the same with a friends phone and when activating the copied files from the SD card, the thing just hangs and I have to reset the phone.
Any idea why it worked on mine and not his?
Same phone, bought in Ireland, a week apart. Different mobile operator networks though..... I'm Vodafone, he's O2 - weird, no?
Click to expand...
Click to collapse
Could be its not booting because of an incompatible radio....
must be above 2.08.50..... you can find this info in settings about phone...
Also, why download android from the piratebay???
Everything android related you could possibly need is here on XDA.
Personally Id be suspicious of anything from a site like that. Theres no way of knowing whats in that Rom. I would change to a well used and trusted build from XDA if I were you.
Theres no exact science to getting this running on different phones, what works for one may not work for another......
heloo , guys
I got problem on hd2 that my mobile does not run android
I tried alot of roms but the problem is stil hapend
the problem is on sd an nand android roms the device is stopped on htc word and the black background I wait about 1 hour with no booting
my device was got android befor this problem whitch was on sd and runs very good
I did soft rest and changed the rom to Energy.Leo.21916.Sense2.5.Cookie.2.0.GTX .Apr.29 after the problem happend but no hope
my Radio 2.10.50.28_2
please help me on it
You should check out the flashing android for noobs thread its in the sticky for nand android development it has step by step detailed instructions and it may help you figure out if you missed a step.
You should probably restore to stock windows mobile and start from scratch. Search for this thread "[GUIDE] Flashing Your First HD2 NAND Android Rom [For Newbs]". Sorry, I can't post link yet.
khaled_se said:
heloo , guys
I got problem on hd2 that my mobile does not run android
I tried alot of roms but the problem is stil hapend
the problem is on sd an nand android roms the device is stopped on htc word and the black background I wait about 1 hour with no booting
my device was got android befor this problem whitch was on sd and runs very good
I did soft rest and changed the rom to Energy.Leo.21916.Sense2.5.Cookie.2.0.GTX .Apr.29 after the problem happend but no hope
my Radio 2.10.50.28_2
please help me on it
Click to expand...
Click to collapse
first off you need to upgrade the radio to 2.15.50.14, do a task29 then flash MGLDR, then find the proper partition for Clockwork mod and flash that, and find a rom that has ongoing support by the dev, and flash that thru CWM, I was an Energy follower when I was in winmo, but NRG is too busy with winmo to keep his desire hd rom up to date, I honestly would recommend Pongster HyperDroid Gingerbread .
same here...
Check you SD card .
If use SD (haret.exe) .the first is very slow when there is not data.img
please wait it last 10min.
khaled_se said:
heloo , guys
I got problem on hd2 that my mobile does not run android
I tried alot of roms but the problem is stil hapend
the problem is on sd an nand android roms the device is stopped on htc word and the black background I wait about 1 hour with no booting
my device was got android befor this problem whitch was on sd and runs very good
I did soft rest and changed the rom to Energy.Leo.21916.Sense2.5.Cookie.2.0.GTX .Apr.29 after the problem happend but no hope
my Radio 2.10.50.28_2
please help me on it
Click to expand...
Click to collapse
someone mentioned a clean installation. and he is right. just perform a clean installation and everything would work as it should. http://www.enfeuman.com/2011/04/13/how-to-perform-a-clean-installation-on-nand-android-htc-hd2/ . here's an exact type of guide you are gonna need, buddy.