Related
This is a call to arms for anyone still running 1.5 on their eris. We (developers) need people to capture the update process using wireshark (or an equivalent). This is needed for a new root attempt, but sadly all of the devs have already updated to 2.1 so we can't do this.
First go here and download the RUU:
http://www.pcdphones.com/downloads/Eris%20MR1.zip
Next you need to go to verizon's website and login to your account. Click "Suspend/Resume Service" and suspend your phone. You can resume service on the phone after you are done here with no penalties or charges.
Please follow these directions, taken from the first root thread
bftb0 said:
Steps:
[Binny knows this, but if anyone else is reading, it is the same as a factory reset - you will lose all your settings and apps (but not the contents of the SD card)]
1) Unpack the 1.16.605 RUU - by running it as if you were going to actually do the RUU using the USB cable and your host PC, but stop right before you would apply the update to the phone. Pull the "rom.zip" file out of the temporary area that the RUU installer unpacks.
(Poke around under C:\Documents and Settings\<Username>\??? (I can't remember - you'll see folders with names that look like registry entries). You have to do this while the RUU installer is sitting there waiting for you - if you cancel the install, it will nuke everything it unpacked. I just made copies of the entire subtrees.
2) Cancel the RUU install.
3) Move the ROM.ZIP file to the root folder of your SD card, and rename it PB00IMG.ZIP
4) You can cancel the RUU install session on the PC, and unplug the USB cable if you want (so long as you have a well-charged battery!)
3) Power down the phone, and boot it back up holding the Call and End buttons simultaneously
4) Scroll down (or whatever it asks) to go from Fastboot mode to HBOOT mode
5) The phone will automatically discover the PB00IMG.ZIP file, and unpack it and verify it.
6) It will ask you if you want to install; when you (select and) enter Yes, the phone will reboot, and come up again - appearing as if it is repeating the same thing. This time, however, it won't stop and ask you - it will just begin the install.
7) Wait... Wait... Wait... Wait... and then wait some more. If I recall correctly, it seems to hang a little bit at the HTC splash screen after the reboot. That is normal - just WAIT and let the phone do it's thing.
That's it, except for:
8) You probably will want to dial *228 and choose option 1 to complete the programming of your phone - it will reboot after it completes.
Click to expand...
Click to collapse
After you are done, DO NOT start the OTA update that it prompts you to do.
Now we are going to install wireshark and setup the capture environment:
Download wireshark from http://www.wireshark.org/download.html for your versions of windows
Install it - make sure you also install WinPcap
At this point you should turn off any wireless encryption on your router. I know it's not necessary but it makes it easier to go through the captures.
Setup the wireless on your phone to connect to your wireless router and turn off your mobile data connection.
After you have turned off the wireless security on your router, we are going to start the wireshark capture.
Run wireshark - if you are on vista or windows 7 make sure to run it as an administrator
Click "Capture" then "Interfaces"
Click "options" next to the interface that your computer has an IP for
Make sure to check "Capture packets in promiscuous mode"
In the Capture Filter box, type "host <ip_address>" where <ip_address> is the ip address your router gave your phone
Make sure that "Automatic scrolling in live capture" is checked so you can ensure the capture is working
Click "Start"
At this point, you should browse the web with your phone. You should see lots of stuff scrolling by in the wireshark window.
If there isn't, you messed up something above and should try again.
If there is a lot of stuff scrolling by, continue:
Close the browser
In wireshark, click "Capture" then "Restart"
Reboot your phone
On your phone, go to "Settings" -> "About Phone" -> "Check for Updates" and go through with the OTA update
After the update is done and your phone is rebooted, go to wireshark and click "Capture" -> "Stop"
Then click "File" -> "Save As" and give it a name.
Upload that file to Megaupload, or Mediafire, or some other file sharing site, or any private server that I can get access to.
After you have uploaded the file please message me through the forums with a link to the file.
Thanks a ton.
e-mail me at [email protected] i got my wifes phones todo this to shes still on 1.5
NO need to have a average user do this, guinea pig yourself and roll back down to 1.5 it can and has been done by other devs.
Isn't there a "logcat" line you can run through adb to get the same thing? Like, when the update is available, you can plug your phone into your computer, connect it to terminal using adb and run a logcat to find the address of the update.zip
FireSokar said:
NO need to have a average user do this, guinea pig yourself and roll back down to 1.5 it can and has been done by other devs.
Click to expand...
Click to collapse
You CANNOT downgrade from 2.1 to 1.5.
Videofolife13 said:
Isn't there a "logcat" line you can run through adb to get the same thing? Like, when the update is available, you can plug your phone into your computer, connect it to terminal using adb and run a logcat to find the address of the update.zip
Click to expand...
Click to collapse
We don't need the location of the update file, we need all the extra network traffic that surrounds the OTA process.
Ah. My bad.
We need to know, exactly, how the update process works.
I'm currently working on downgrading 2.1. Will post back a tut if i get it working
Can't we create an AVD to run with a custom rom and use the Eris MR1 ROM to do it?
Scratch that. I don't think AVDs will get OTAs.
zifnab06 said:
Scratch that. I don't think AVDs will get OTAs.
Click to expand...
Click to collapse
Sadly I tried this a while ago when messing around with AVD Skins but wasn't able to figure it out. If anyone can figure it out please let me know how you do it! -_-"
zifnab06 said:
Scratch that. I don't think AVDs will get OTAs.
Click to expand...
Click to collapse
Wait can't you set it to wireless only mode and get the OTA through wireless? (Simulated by your network connection)
nindoja said:
This is a call to arms for anyone still running 1.5 on their eris. We (developers) need people to capture the update process using wireshark (or an equivalent). This is needed for a new root attempt, but sadly all of the devs have already updated to 2.1 so we can't do this.
...
Thanks a ton.
Click to expand...
Click to collapse
No need to go to all that trouble. I've already posted a link to the OTA update (1.16.605.1 -> 1.17.605.1) in this XDA thread a couple of days ago. Just copy n' paste into your browser's URL bar. I'll repeat it here for grins.
https://android.clients.google.com/updates/partner/desirec-ota-104882.7b1e5cca.zip
(You might get a browser security warning as that server uses the wrong (google.com) cert.)
Let me know if the above link no longer works - I suppose I could repeat the OTA thing - I am not on 2.1
The OTA process drops the downloaded zip file into /cache, and somehow during reboot, it's presence is detected. If it "only" needs to be dropped in there, or there are some other hooks that need to be present at the reboot, I am not sure. I say "only" because that implies that root privilege is needed to do that - or perhaps it is possible to use "fastboot update" after rebooting the phone with $ adb '(sync; reboot -n oem-78)' The OTA zip file is not signed the way the RUU "rom.zip" files are; it uses the same signing methods as app (.apk) files - the SDK "jarsigner" method.
You can unpack the zip file and look at what it does - there is a script at
META-INF/com/google/android/update-script
which controls the update... and there is a binary patch executable included in zip which is called upon to do file-by-file binary patching.
cheers
bftb0
Thanks for the info bftb0, but we aren't looking to snag the OTA file. We are actually trying to see what communication goes on between our phones and the verizon update servers.
FYI,
When you roll back to MR1, the phone seems to have already grabbed and downloaded the OTA update... in less time than it takes to hand-configure the phone. If you want to observe the OTA process via wireless, you need to prevent the phone from having Mobile network access, since that comes up by default after a FR or MRx rom burn.
Here's a long shot. Perform the MR1 rollback inside a cell dead zone, and conduct a MIM attack by setting up a server on the wireless net so the phone downloads a different OTA zip. You control DHCP for WiFi, so you also in principle control the DNS and routing the phone sees via WiFi. In principle, it's not possible because https should prevent Man-In-the-Middle... but if that (Google) server isn't correctly configured, maybe the phone is not really being too careful about certificate problems. (Either that or the Google server is tuning its' responses based on UA strings).
bftb0
bftb0 said:
No need to go to all that trouble. I've already posted a link to the OTA update (1.16.605.1 -> 1.17.605.1) in this XDA thread a couple of days ago. Just copy n' paste into your browser's URL bar. I'll repeat it here for grins.
https://android.clients.google.com/updates/partner/desirec-ota-104882.7b1e5cca.zip
(You might get a browser security warning as that server uses the wrong (google.com) cert.)
Let me know if the above link no longer works - I suppose I could repeat the OTA thing - I am not on 2.1
The OTA process drops the downloaded zip file into /cache, and somehow during reboot, it's presence is detected. If it "only" needs to be dropped in there, or there are some other hooks that need to be present at the reboot, I am not sure. I say "only" because that implies that root privilege is needed to do that - or perhaps it is possible to use "fastboot update" after rebooting the phone with $ adb '(sync; reboot -n oem-78)' The OTA zip file is not signed the way the RUU "rom.zip" files are; it uses the same signing methods as app (.apk) files - the SDK "jarsigner" method.
You can unpack the zip file and look at what it does - there is a script at
META-INF/com/google/android/update-script
which controls the update... and there is a binary patch executable included in zip which is called upon to do file-by-file binary patching.
cheers
bftb0
Click to expand...
Click to collapse
bftb06: could you please PM me? I am going to trade my phone this week if you understand what I am getting at.
nindoja said:
Thanks for the info bftb0, but we aren't looking to snag the OTA file. We are actually trying to see what communication goes on between our phones and the verizon update servers.
Click to expand...
Click to collapse
Sorry, my bad. I didn't read carefully enough.
I could probably attempt what you are asking for - I am quite familiar with wireshark (and even hardware sniffing of WiFi, so long as you have the right nic), but the fact that the phone seems to go and look for updates immediately after a FR or MRx update means that the "check for updates" thing may not do anything useful for you if there is already an update on the phone waiting to be installed by the time you start pressing menu buttons. (Thus the idea about "do MR1 in a cell dead zone")
Beyond that, there is a possibility that the update app does not do a wildcard host bind() when it sets up the socket when it inquires about updates with the Verizon servers - for instance, MMS service works exactly that way (it will only use the mobile network interface), and precisely so because of security considerations. Do you know whether or not any of the update conversation actually traverses WiFi if the mobile network is turned off?
bftb0
bftb0 said:
Do you know whether or not any of the update conversation actually traverses WiFi if the mobile network is turned off?
bftb0
Click to expand...
Click to collapse
You can force updates to occur over WiFi if the mobile network is turned off. Do you think this would work:
1. on 1.17 do a factory reset but do not activate the phone.
2. Initiate the downgrade process
2a. while downgrading, turn on packet capture
3. When the phone boots back up and wants you to call a number to activate, hang up
I think if you can skip the activation the phone will not have a mobile data connection, which would allow you to turn on wifi and initiate the update process.
Im still on 1.5 PM me and ill help if needed
Do you guys still need this?
i was looking around on ebay and noticed this
http://cgi.ebay.com/HTC-EVO-ENABLE-...ell_Phones&hash=item2a09ba8398#ht_1734wt_1137
Most likely hev will sell you instructions which you can pr
op find online for free
Sent from my SAMSUNG-SGH-I897 using XDA App
Probably just android wifi tether, which is free in the first place. Or, is there a hacked version of the sprint app out there somewhere?
Hrshycro said:
Probably just android wifi tether, which is free in the first place. Or, is there a hacked version of the sprint app out there somewhere?
Click to expand...
Click to collapse
Doubt an ebayer has a hacked version of the Sprint app, but he does say that this doesn't void your warranty (unless he thinks that rooting doesn't void warranties.)
Doesn't work on Froyo. My money is on a hacked version of the Sprint app.
Tempting to spend the $5. If it involves root, you can get your money back since it is false advertising.
I sent him a piece of my opinion.
mattrb said:
I sent him a piece of my opinion.
Click to expand...
Click to collapse
LOL what'd ya say?
Sent from my PC36100 using XDA App
hes probably sending out instructions on unrevoked and android tether, which you can get on youtube for free
I reported him for selling someone else's intellectual property, since I highly doubt he actually wrote that app, and if it doens't involve hacking the only instructions he could include are "put on SD card and run."
Well .. my opinion...not that it matters..
You will see stuff like this all the time. He isnt selling the software, only instructions on how to do it. I really don't see anything wrong with that. People buy instructions on how to do things all the time. There really isn't anything wrong with that. If someone is too lazy to reseach it and figure it out themselves, oh well. That's the great thing about America. Everyone has a hustle, nobody is forcing anyone to buy it. Maybe it is some college kid scraping to get along, maybe not. Either way, no harm no foul. You don't like it, don't buy it...
Now if he was selling the free software, thats a different ballgame.
I don't see how reporting him for selling someone elses stuff is cool... he's selling instructions. Whoopie.
Agreed. It's no different than someone accepting payment when someone asks for help on this forum and offers to pay someone via Paypal. I occasionally see threads like that around.
Sent from my PC36100 using XDA App
apristel said:
Well .. my opinion...not that it matters..
You will see stuff like this all the time. He isnt selling the software, only instructions on how to do it. I really don't see anything wrong with that. People buy instructions on how to do things all the time. There really isn't anything wrong with that. If someone is too lazy to reseach it and figure it out themselves, oh well. That's the great thing about America. Everyone has a hustle, nobody is forcing anyone to buy it. Maybe it is some college kid scraping to get along, maybe not. Either way, no harm no foul. You don't like it, don't buy it...
Now if he was selling the free software, thats a different ballgame.
I don't see how reporting him for selling someone elses stuff is cool... he's selling instructions. Whoopie.
Click to expand...
Click to collapse
agreed. 100%
TheBiles said:
I reported him for selling someone else's intellectual property, since I highly doubt he actually wrote that app, and if it doens't involve hacking the only instructions he could include are "put on SD card and run."
Click to expand...
Click to collapse
that's pretty lame when you are only assuming. for all you know he knows a data code that unlocks it. before you go run and tell mommy why don't you put up the 5 bucks and see what he is ACTUALLY selling?
nicholaaaas said:
that's pretty lame when you are only assuming. for all you know he knows a data code that unlocks it. before you go run and tell mommy why don't you put up the 5 bucks and see what he is ACTUALLY selling?
Click to expand...
Click to collapse
+1 for that!
I just purchased...will let you know what I get for my $5.00
since your throwing money out in the street,
i have a neat way to allow you to copy your legally purchased music direct to your SD card.
will not void your warranty and i can send the instructions immediately upon payment!
this works on 2.1 and 2.2. you can be rooted or stock.
for you ill sell it for $4.98 US dollars. PM me for paypal info..
marctronixx said:
since your throwing money out in the street,
i have a neat way to allow you to copy your legally purchased music direct to your SD card.
will not void your warranty and i can send the instructions immediately upon payment!
this works on 2.1 and 2.2. you can be rooted or stock.
for you ill sell it for $4.98 US dollars. PM me for paypal info..
Click to expand...
Click to collapse
$4.98 seems a little steep...I will give ya $2.36
On a more serious note, I am just too curious to find out what he is selling and I think others are also. If I have to pay $5.00 to find out what he is selling, so be it. I spend more than that a day giving to homeless people on the street.
Instructions sent to me:
Video here :
http://www.youtube.com/watch?v=uoSBZgqkKME&feature=player_embedded#!
FOR EVO OWNERS DO NOT DO ANY UPDATES JUST YET THIS WILL ONLY WORK WITH THE 1.47 SOFTWARE VERSION.
ALRIGHT HERE THEY ARE, I HAVE INCLUDED 3 DIFFERENT SETS OF INSTRUCTIONS. PLEASE READ ALL OF THEM TO GET A FEEL FOR WHAT YOUR DOING SOME GO INTO MORE DETAIL THAN OTHERS BUT THEY ALL GET YOU TO DO THE SAME THING. RIGHT BELOW IS HOW YOU GET THE WIFI TETHER APP WHICH IS SOMETHING THAT YOU WILL HAVE TO DO AS WELL. BUT JUST READ AND FOLLOW STEP BY STEP.
****RIGHT BELOW IS HOW YOU GET THE ACTUAL WIFI TETHER APP****
1. Now go back to you internet browser on your phone and pull up google.
2. Type in "android wifi tether" and click search.
3. The first option that comes up after the search called "android wifi tether - Project Hosting..."
4. Select the first option and let it take you to the web site.
5. Now the page will pull up and look for where it says "HTC Evo" under device and just to the right of that
you will see a link that says "download" click download.
6. Now click the link that says "wireless tether for root users 2.0.2.apk.
7. Click on "wireless tether for root users 2.0.2.apk" again.
8. Now click "wireless_tether_2_0_5-pre2.apk" and let it install.
******First set of Instructions******
(1) If you have the original unrevoked root installed, uninstall it by using "Menu," "Settings," "Applications," "Manage Applications" and scrolling to "Unrevoked" at the bottom. Tap it, click "Force Stop" at the bottom and then "Uninstall," "OK" to uninstall it. Then power off/on your phone just to be sure.
(2) If you haven't already installed the OTA 1.47 update, do it now: "Menu," "Settings," "System Updates," and "HTC software update" at the bottom, then click "Check Now" to get the 1.47 update. If you do this update, it takes up to 10 minutes so be patient and let the phone reboot (a few times) until it is done. Then once the update is done, power off/on one last time to get a clean start.
(3) Set your phone to "Charge Only:" "Menu," "Settings," "Connect to PC," tap "Default connection type" and select "Charge Only."
(4) Enable USB debugging: "Menu," "Settings," "Applications," "Development," and put a check in "USB debugging."
The process: DOWNLOAD THE REFLASH PACKAGE FROM http://unrevoked.com/recovery/ NO MATTER WHAT!
(1) Download the unrevoked3 install package: Go to unrevoked3 recovery reflash tool, v3.0 and click "Download for Windows." Save the "Reflash-bundle.exe" file somewhere that you can find it on your system.
(2) Using Explorer, run the "Reflash-bundle.exe" file you just downloaded. It'll ask where to install it. Don't just accept the default: change the install location to a folder you can remember: it's just going to unzip some files there: it isn't really a software installer.
(3) Once the files have unzipped, go to the folder you chose in the above step. You should find an "hboot driver.htm" file in that folder: double click on that to open the html instructions on how to install the drivers. Follow the instructions in the html file starting with downloading the actual driver files at the very top. When you download those driver files and unzip those, those are the files (the folder) you'll point to in subsequent steps in those instructions. When done with the html instructions, you should have drivers installed and shouldn't have to come back to this step.
(4) At this point, if you needed to install the drivers, you are probably still sitting at a boot menu on your phone. UNPLUG the phone from USB and select "Fastboot" and then "Reboot" to reboot the phone to restart it. Before the next step, your phone should be on and booted up in its normal operating state (not some boot menu).
(5) Now go to the folder where you unzipped the reflash bundle (step 2 above). Just double click the "Reflash.exe" file.
(6) You should get a window with "Unrevoked 3" on it (on the computer of course). Just follow the instructions in smaller font below "Unrevoked 3" to finish rooting. Note that when it says "Waiting for device," it wants you to plug your EVO into the computer via the USB cable. Note that it wants the EVO to be fully booted normally (not in the Hboot or recovery menus). The prompts at this point are very specific so no need to repeat them. If all works as it is supposed to, the only thing you really have to do is scroll to an item on the phone and select it when instructed. The rest is automated and should result in a "Done" message. The whole thing at this point took maybe one minute so it isn't something you have to wait for or stare at for a long time.
*****Second set of Instructions*****
All the instructions I've found for using unrevoked3 to root an Evo on a Windows PC seem to be piecemeal (all over the place and incomplete), so I thought I'd give a rundown of what worked for me. Some of these steps may be unnecessary but doing all of them should result in a "safe" root. This is written for those with little to no knowledge of rooting but with basic Windows/PC skills and knowledge of how to navigate the Evo interface:
Prep
Before beginning the process, I would recommend doing the following to your phone:
(1) If you have the original unrevoked root installed, uninstall it by using "Menu", "Settings", "Applications", "Manage Applications" and scrolling to "Unrevoked" at the bottom. Tap it, click "Force Stop" at the bottom and then "Uninstall", "OK" to uninstall it. Then power off/on your phone just to be sure.
(2) If you haven't already installed the OTA 1.47 update, do it now: "Menu", "Settings", "System Updates", and "HTC software update" at the bottom, then click "Check Now" to get the 1.47 update. If you do this update, it takes up to 10 minutes so be patient and let the phone reboot (a few times) until it is done. Then once the update is done, power off/on one last time to get a clean start.
(3) Set your phone to "Charge Only": "Menu", "Settings", "Connect to PC", tap "Default connection type" and select "Charge Only".
(4) Enable USB debugging: "Menu", "Settings", "Applications", "Development", and put a check in "USB debugging".
The root process
(1) Go to Control Panel on your system and uninstall any "HTC" software such as "HTC Sync".
(2) Download the unrevoked3 install package: Go to
unrevoked3 recovery reflash tool, v3.0 and click "Download for Windows". Save the "Reflash-bundle.exe" file somewhere that you can find it on your system.
(3) Using Explorer, run the "Reflash-bundle.exe" file you just downloaded. It'll ask where to install it. Don't just accept the default: change the install location to a folder you can remember: it's just going to unzip some files there: it isn't really a software installer.
(4) Once the files have unzipped, go to the folder you chose in the above step. You should find an "hboot driver.htm" file in that folder: double click on that to open the html instructions on how to install the drivers. Follow the instructions in the html file starting with downloading the actual driver files at the very top. When you download those driver files and unzip those, those are the files (the folder) you'll point to in subsequent steps in those instructions. When done with the html instructions, you should have drivers installed and shouldn't have to come back to this step.
(5) At this point, if you needed to install the drivers, you are probably still sitting at a boot menu on your phone. UNPLUG the phone from USB and select "Fastboot" and then "Reboot" to reboot the phone to restart it. Before the next step, your phone should be on and booted up in its normal operating state (not some boot menu).
(6) If you are running anti-virus software, turn it OFF or disable it now.
(7) Now go to the folder where you unzipped the reflash bundle (step 3 above). In XP or older systems, just double click the "Reflash.exe" file. On Vista and Win7 systems, I'd recommend right clicking on "Reflash.exe" and selecting "Run as Administrator". While this may not be necessary, I know that some USB drivers get really mad if you try to access the USB port without admin privileges (sorry, I'm a coder so I run into that stuff and warn you so you don't have to) so I did it as a precaution.
(8) You should get a window with "Unrevoked 3" on it (on the computer of course). Just follow the instructions in smaller font below "Unrevoked 3" to finish rooting. Note that when it says "Waiting for device", it wants you to plug your Evo into the computer via the USB cable. Note that it wants the Evo to be fully booted normally (not in the Hboot or recovery menus). The prompts at this point are very specific so no need to repeat them. If all works as it is supposed to, the only thing you really have to do is scroll to an item on the phone and select it when instructed. The rest is automated and should result in a "Done" message. The whole thing at this point took maybe one minute so it isn't something you have to wait for or stare at for a long time so if something gets "stuck" for a while... there's likely a problem.
(9) Don't forget to turn your anti-virus software back ON.
Now, when I followed these steps on my Win7 x64 system, reflash.exe detected the phone and started working (we're in step 8 here) but about 4 messages into the process I got the "communications lost... try again" message that unrevoked refers to on today's Twitter. Some say that (contrary to step 1) installing HTC sync actually solves the problem. I didn't try that. After about 6 tries on my Win7 system and even pulling some "tricks" to try to pause reflash.exe at certain points, I gave up and simply booted my old XP laptop and repeated the above steps and it worked perfectly the first time. At the point of the failure, you hear the two tone usb-device-disconnected sound followed by a use-device-connected sound about 20 seconds later. Somewhere in between is where the "communications lost" message appears so it looks like some sort of USB ack/nack issue. Hopefully it'll be resolved soon. My best advice if you get that error: try a new machine. The XP machine that worked perfectly for me had never seen any HTC software. Maybe that helped. And maybe after I uninstalled the HTC software on my Win7 x64 system (the one that didn't work) I should have rebooted before continuing: I didn't because it didn't prompt for a restart and I couldn't find anything "HTC" running in task manager.
****Third set of instructions****
http://www.androidpolice.com/2010/0...tc-droid-incredible-explanation-instructions/
*******READ BELOW FIRST BEFORE GOING TO WEB SITE ABOVE********
Alright here is the web site that you need to follow. First of all make sure you have USB DEBUGGING checked on you phone and UNKNOWN SOURCES is checked as well.
To do this go to Settings-->Applications--> check UNKNOWN SOURCES, then right below that click development and check USB DEBUGGING.
Now this is just as important you HAVE to uninstall any program that automatically comes up when you plug in your android phone (HTC Sync, DoubleTwist or any other program). If you do not do this it will not work. Trust me it took me 3 hours to figure this out but once i uninstalled these two programs it worked the first time. So if you follow all of the directions on the web site it will work without a hitch.
Go ahead and go to the web site and read it over one good time without doing anything JUST READ IT! When you do that come back and read the rest.......Go on read it but just read it don't do anything else till you read the rest of this email
You will need to do the steps below to get the app for wireless tether so you can do it before or after you install the directions from the web site above.
1. Now go back to you internet browser on your phone and pull up google.
2. Type in "android wifi tether" and click search.
3. The first option that comes up after the search called "android wifi tether - Project Hosting..."
4. Select the first option and let it take you to the web site.
5. Now the page will pull up and look for where it says "HTC Evo" under device and just to the right of that
you will see a link that says "download" click download.
6. Now click the link that says "wireless tether for root users 2.0.2.apk.
7. Click on "wireless tether for root users 2.0.2.apk" again.
8. Now click "wireless_tether_2_0_5-pre2.apk" and let it install.
Those are the instructions for the actual app that will turn on the tethering.
When you go to the web site above you will need to follow the steps from where it says "instructions"
First download the software fromunrevoked.com for your hero or evo to your computers desktop, then make a new folder on your desktop and put the app that you downloaded from unrevoked.com and put it in there because that is where all of the files will extract too when you run the unrevoked program.
Second you will need to install the drivers, on the web site click on the install drivers hyper link and it will take you to the web site to download the drivers again just make a new folder on your desktop and extract the files into it, it is very simple if you just take it slow and follow the directions.
After you install the drivers you will run the reflash package inside the folder that you made on your desktop when you do that it will extract the files and you will finally run the application on your computer called ReFlash. Try plugging your phone in first and then running the program or vise versa. Let the app do its thing and follow instructions on the programs screen. When it finally says Done your phone will be on a screen that you have never seen before but you will want to click on the first option with the power button that says restart phone. (or whatever the first option is it should say restart). You will see in your apps on your phone a app called superuser permissions. That is what you want to see to know if it worked. Once that is there run the wifi tether app that i showed you how to install earlier.
The web site above has some very good help forums but to be honest this is very simple to do just take your time and if you have any computer skills at all and can follow instructions you can do this.
So, since it is root instructions, is he selling a method that would void the warranty?
I've been messing around in google app inventor getting an idea for the flow of code and figured that it's time to step up to an actual coding environment.
So I went and downloaded the most recent SDK and eclipse. I installed all the available resources and revisions.
Then i hit a snag. The guide said that in order to properly set up Eclipse i need the ADT plugin. I opened the help menu and went to install new software and clicked on the add button. In the name section i put "ADT Plugin" and in location i put the exact web address they gave and it kept giving an error that said unable to connect to repository... i even tried http over https but still experienced the same issue. I entered the website enter my web browser in hopes that it would connect to a ftp server or start a direct download but unfortunatly it was a google site that was no longer available.
So i want to know if theres a mirror download somewhere that i can manually install to eclipse.
Also my eclipse info
Eclipse SDK
Version: 3.6.1
Build id: M20100909-0800
Sent from my futuristic phone
Yes mate, from here...
http://developer.android.com/sdk/eclipse-adt.html
Towards the bottom of the page it tells you what to do if the URL doesn't work.
johncmolyneux said:
Yes mate, from here...
http://developer.android.com/sdk/eclipse-adt.html
Towards the bottom of the page it tells you what to do if the URL doesn't work.
Click to expand...
Click to collapse
I freaking love you in a strictly platonic way.
I kinda feel like an idiot cause I didn't read farther lmao
Sent from my futuristic phone
ironlood said:
I freaking love you in a strictly platonic way.
I kinda feel like an idiot cause I didn't read farther lmao
Sent from my futuristic phone
Click to expand...
Click to collapse
lol - glad to help mate.
Okay just ran into another hitch
I downloaded the zip file and go to install new software but instead of the website i use the archive. It provides me with a list of 3 options
Android DDMS
Android Development Tools
Android Hierarchy Viewer
I put a check in each box and click next it says calculating Dependencies and requirements then i get an error that says
Cannot complete the install because one or more required items could not be found.
Software being installed: Android Development Tools 8.0.1.v201012062107-82219 (com.android.ide.eclipse.adt.feature.group 8.0.1.v201012062107-82219)
Missing requirement: Android Development Tools 8.0.1.v201012062107-82219 (com.android.ide.eclipse.adt.feature.group 8.0.1.v201012062107-82219) requires 'org.eclipse.gef 0.0.0' but it could not be found
Now this has me at a loss. If i downloaded the Archive in theory i shouldn't have to connect to any more sites to install the plugin. I want to know if there is a way to drag and drop the contents of the archive to a plugins folder then open eclipse and refresh the installed plugins in order to show that ADT has been installed.
Not sure if the 64 bit side of things could be an issue (either for you or for anyone), but this guy seems to have solved the same problem...
http://superuser.com/questions/221944/huh-jdk-not-found-on-windows-7-64-bit
Hope it helps mate.
KK ill see if i can follow this and come up with a fix to my issue. not too sure how this will work since im running a 32bit system with windows Vista
I'm still experiencing the same issue with eclipse unfortunately, i even downgraded to Galileo instead of Helios thinking that it was an incompatibility issue with the newest version or the most recent version. I even tried dragging the .JAR files in the ADT zip into the eclipse folder in an attempt to get Eclipse to recognize the plugins without having to install them through the "install new software" dialog.
Everytime I try to connect to the download server it gives me a message that says An exception stack trace is not available. Or Unable to connect to repository http://dl-ssl.google.com/android/eclipse/content.xml
Connection refused: connect
I'm not new to WP7 but just new to all the sideload and unlocking thing, so i was wondering where can i find some homebrew good apps for my phone, any repo or something like that if it exists, it might be of so much help.
WaddyMontero said:
I'm not new to WP7 but just new to all the sideload and unlocking thing, so i was wondering where can i find some homebrew good apps for my phone, any repo or something like that if it exists, it might be of so much help.
Click to expand...
Click to collapse
Need to be more specific. Most homebrew is here (see Development/Software threads)
Also see the post in my sig for more details if you don't know where to start.
EnderPsp said:
Need to be more specific. Most homebrew is here (see Development/Software threads)
Also see the post in my sig for more details if you don't know where to start.
Click to expand...
Click to collapse
Sorry, i'll try to be more specific. I previously owned a HD7 but i change it for a Focus, 'cause i wanst gettin' access to the 3g network on my country out of it. So now i got the Focus and i was tryin' to unlockin' it, what i did, usin' the WindowBreakMe method and also i installed magdlr on the phone. I was looking for sideload apps to try on my phone, thats what i meant in first place, thanks to the post on your sig and endlessly searching i've found Bazaar and i've installed it on my phone, but now when i download any app from Bazaar, it gives me an error, that go as follows "Bazaar can't install applications on your device. It seems that is not fully unlocked. To deploy applications you should download Bazaar for PC. Read more at www.WP-Bazaaar.com".
Im sure my device is fully unlocked, i've installed Samsung Root Tools and DiagProvXML and enabled internet sharing and the 3g switch, and many more. Do you think my device relocked itself even i got the checkmark "Prevent Device Relocking" checked at Samsung Tools. Help, please.
WaddyMontero said:
Sorry, i'll try to be more specific. I previously owned a HD7 but i change it for a Focus, 'cause i wanst gettin' access to the 3g network on my country out of it. So now i got the Focus and i was tryin' to unlockin' it, what i did, usin' the WindowBreakMe method and also i installed magdlr on the phone. I was looking for sideload apps to try on my phone, thats what i meant in first place, thanks to the post on your sig and endlessly searching i've found Bazaar and i've installed it on my phone, but now when i download any app from Bazaar, it gives me an error, that go as follows "Bazaar can't install applications on your device. It seems that is not fully unlocked. To deploy applications you should download Bazaar for PC. Read more at www.WP-Bazaaar.com".
Im sure my device is fully unlocked, i've installed Samsung Root Tools and DiagProvXML and enabled internet sharing and the 3g switch, and many more. Do you think my device relocked itself even i got the checkmark "Prevent Device Relocking" checked at Samsung Tools. Help, please.
Click to expand...
Click to collapse
Specific enough, I'd say
If you've already deployed WP7 Root Tools and Samsung Tools, you can always re-run the unlock sequence (in Root Tools first and then ST). Just to keep in mind Do not remove these 2 apps from the phone to test sideloading, once unlocked!
I'm not familiar with Bazaar but it seems you're missing a PC component used in the deployment process?
As for deploying, choose a XAP from the development forum and try to deploy it. If you can, it means you're unlocked (evidently).
If you can't deploy, try WINCO's XAP Assistant.
Let us know how it goes.
Like the subject says I am having a few problems.
I have a Lumia 950 XL, which I have just acquired.
My first problem is that I have no problem sideloading apps, but if I try to install too many I get this message "unable to install application. the maximum number of deveiloper applications on this phone has been reached. please uninstall a developer application or try again". I think it is letting me install about 10, but won't let me install anymore.
Ok My second problem is that I followed this tutorial on youtube, which I thought might fix my first problem
Seemed like a good tutorial but I had a couple of problems.
I installed Windows Universtal Toll (WUT). CMD Injector and Interop Tools (RC)
The problem was that the CMD Injector just shuts down when I click 'Inject'
Also in the Interop tools I can't turn on Inerop/Cap unlock or New Capability Engine Unlock. It just turns on again.
I hope someone can help me with these problems.
The first problem is the most annoying as I have tons of XAP files I would like to install
regards
Asimov
I have now realised what I did wrong. I followed the wrong tutorial for an x50 phone. Unfortunately I think I have now killed my phone as I ticked the option Restore NDTKSrvc and it won't turn off.
I tried following the following tutorial for doing the vcReg10 but it won't work because of the Restroe NDTKSrv. I think I have done something stupid, and now I can't even see my documents and pictures when I plug in my USB cable. I just see a pile of system files.
Asimov500 said:
I have now realised what I did wrong. I followed the wrong tutorial for an x50 phone. Unfortunately I think I have now killed my phone as I ticked the option Restore NDTKSrvc and it won't turn off.
I tried following the following tutorial for doing the vcReg10 but it won't work because of the Restroe NDTKSrv. I think I have done something stupid, and now I can't even see my documents and pictures when I plug in my USB cable. I just see a pile of system files.
Click to expand...
Click to collapse
Ok I did a complete reset, so the phone is back to square one. Gonna redo the above tutorial before copying everything back to the phone.
Right I got the phone unlocked ok, but there is a but. I followed the above tutorial on how to unlock the phone and everything went fine. So then I downloaded WUT Windows Universal Tool, but here is the problem with it. It download to the download folder. For instance I downloaded TinyVNC, but if I try to install from the phone it don't install. However if I copy it back to my PC and install with WPV XAP deployer it works.
Can you tell me why I can't install straight from my phone?
I can double click and it says install, but it never installs.
Asimov500 said:
Right I got the phone unlocked ok, but there is a but. I followed the above tutorial on how to unlock the phone and everything went fine. So then I downloaded WUT Windows Universal Tool, but here is the problem with it. It download to the download folder. For instance I downloaded TinyVNC, but if I try to install from the phone it don't install. However if I copy it back to my PC and install with WPV XAP deployer it works.
Can you tell me why I can't install straight from my phone?
I can double click and it says install, but it never installs.
Click to expand...
Click to collapse
Perhaps that's because along with the WUT you get a valid certificate (e.g. WUT_1.4.11.0_x64.cer) , which is missing from the phone.