Related
While rooting the phone will allow for all sorts of stuff I am mostly interested in getting past the second NAI check Sprint has (which was easy to do with the Instinct.) I found some directions at http://www.insiderforums.com/forums/showthread.php?t=31642 but these aren't working right for me. Perhaps someone else can give them a try?
Also, when I bought my Hero from Best Buy I did get a sheet of paper with the phones "password" on it. I thought this was the MSL but it doesn't work to actually unlock the ##DATA# editing (though put in by itself it will show the ESN info.) If this isn't the true MSL what can I tell Sprint is the reason for giving it to me? (A factory reset use to be a good excuse but this is built-in command on the Hero.)
Thanks.
Hi, I finally got my MSL, so I'm going to try this now...will report back with the results.
Also, I got my MSL today by doing an ecare chat session, and told her that I was having problems with my voicemail, and that I'd like her to walk me through a manual provision so we could properly set up my number and MSID number. She didn't ask any suspicious questions, just helped me and immediately gave me my MSL.
EDITS:
-So far I have a different version of QPST, and it didn't recognize my hero, so I'm downloading his new version. will post back soon.
-I put the new build of QPST on my Vista machine, and it still doesn't recognize my phone model. I can add the USB port (on mine COM 8) but it still says unknown phone...crap. I'm going to try it at home on my XP Machine to see if that makes a difference. Will post back with results.
-Tried on an XP laptop we have here at the office. Still no go. It's not recognizing my phone model. I see that you posted exactly the same thing I'm seeing in that forum. Want to relay that to him? I don't have an account. Also, I COULD get into it on my other version of QPST, however, I just chose one of the umpteen models in there, none of which applied to my hero. They were all like "FFA-1330" and stuff like that. Nothing hero looking. I noticed when doing some more research that this can happen with older versions of QPST. Wondering if a newer version would make a difference, or maybe Chris is using a different version than 2.7.301.
-Found a newer version of QPST, version 2.7.323, downloading now at a painfully slow rate.
JACKPOT!
This version of QPST properly works and found my phone as a "FFA/SURF 7600" phone. I'm now following his guide to see if I can't get it to work.
Since this was a success, I felt it should be in another post
EDIT:
OK, so I followed his guide, copied my NAI into tethered NAI, and when choosing "Write to phone" I got a write error reported. It states under the NV Item column "NV_UE_IMEI_I" and under the Status column "NV_READONLY_S"
When I again chose to read from phone, it seems that the change is still in there. I'm going to do the all important test, and will report back as to if it actually works. I'm giddy like a schoolboy right now.
--Well, I still get the error 67 and error 65, so it appears it didn't work. Phooey. I'm still going to mess with it more to see what happened. I felt good about it, and maybe there's still some hope.
Same. I updated both Profile 0 and Profile 1. Same "read only" error but after a reboot, update profile, and rerunning QPST the changed values appeared to be there but still 65/67 errors.
Any one else try this yet?
Just wondering if any one has any luck with this now? I am downloading QPST now.
It would be great if someone who already has a grandfathered PAM ability for their Hero to try this and report what they are seeing. Also the output from ##DATA# to see what if anything there is different.
Same Thing
No Joy.
I just followed the same steps and had the same thing happen as kmartburrito.
I'll get this to work, I've enabled PAM on every sprint phone I've had since they introduced the unlimited data plan bout 5-6 years ago
we're going to get the MSL number and instead of writing to phone we'll just edit the settings in phone (safer than hard writing stuff that might screw with your MEID & ESN settings)
I'll post when I get it to work, just wanted to let yall know I'm hot on it.
**********************************************************
This is a modified guide I wrote for the instinct that will walk you through how to get your MSL code and what to do with it.
DISCLAIMER, I am ###NOT### responsible for any damage you do to your phone or your phone network with this information
**********************************************************
some uers still getting errors, if you fall into this catagory, you can recover via SPRINT RUU which will wipe your phone
ftp://xda:[email protected]rs.co...U_Hero_C_Sprint_1.29.651.1_signed_release.exe
---- How to access programming and service menus---
On your phone go to the dialer, then dail in any one of these codes below and after the last # you should get the menu or it will ask for "current code" aka your MSL #
##data# (##3282#)
##debug#(##33284#)
##diag#(##3424#)
##svn#(##786#)
##prl#(##775#)
##prev#(##7738#)
##akey#(##2539#)
##vocoder# (##8626337#)
-------How to get your MSL code---------------
1) download required 3rd party apps
download demo version of CDMA WORKSHOP from
http://www.cdma-ware.com
newest version of qpst 2.7b323
http://rapidshare.com/files/297770360/qpst.zip
download of sprint's official phone as modem (PAM) software
Smartview for Windows
http://www4.sprint.com/pcsbusiness/down ... s_1.16.exe
Smartview for Macs
http://www4.sprint.com/pcsbusiness/down ... c.mpkg.zip
download HTC Sync
http://www.htc.com/us/SupportDownload.aspx?p_id=300&cat=3&dl_id=716
2) install the HTC HERO DIAG drivers
http://rs79.rapidshare.com/files/293529424/HTC_Hero_DIAG_Drivers.zip
3)connect your phone via usb cable
4)dial ##diag# (##3424#) on your phone for diag menu, when prompted direct windows to diag drivers listed above
5)run CDMA WORKSHOP, settings at main screen on the right are as follows
com settings (AT mode)
---------------
Port (com#) <--- click port and it should say "HTC DIAG COM PORT"
Baud rate (115200) <--- use this setting
com settings (DM mode)
---------------
Baud rate (115200) <--- use this setting
6) you should now be able to hit <connect> if it was successful you'll see in status bar <connected to com#>
7) now click <read> after a moment all your info will come up on left panel, phone # etc
8) click on security tab change the right panel setting and look for the following block
SPC/User Lock
----------------
Defualt (nv_read) <--- use this setting
9)now click read if done sucessfully you'll see the block below this option flash red and give you a number
10)note the 6 digit number under <SPC/USER LOCK> the one that flashed red, ****this is your MSL number***
***** just an additional warning***** you can REALLY and I mean REALLY screw up your phone if you change one of the settings in those menus if you don't know EXACTLY what you are doing. This isn't for the faint of heart or the random tinkerer.... just be warned
;;;;;;;;;;;;;;;;;;;;;;
So in reading your post, it seems the only thing I haven't done is modify my profile 0 in qpst, since I've already modified profile 1 per the guide on insiderforums in the original post by gilroykilroy. Does all that sound correct?
Thanks for writing up that guide Johnson!
If I understand the directions johnsongrantr posted you are replacing the profile 0 NAI with the profile 1 NAI. I tried that and after it initially seemed to work it gave me error 67 when I booted my phone and tried to connect to the network and/or trying Update Profile.
Also note that my phone has [email protected] (not mcs.sprintpcs.com).
I seem to have better luck leaving the settings along and using the race-condition method.
Alas still no luck getting my Mac to recognize the phone connection.
Updated profile 0 as described but still getting error 65/67. Is there some other step to turning on the PAM other than in the setting "Mobile network sharing"?
Update:
Just tried to update profile: cannot update profile and get Error 67.
redcloud said:
Updated profile 0 as described but still getting error 65/67. Is there some other step to turning on the PAM other than in the setting "Mobile network sharing"?
Update:
Just tried to update profile: cannot update profile and get Error 67.
Click to expand...
Click to collapse
it worked on mine, but it may be something to do with your account.... you can recover via SPRINT RUU which will wipe your phone
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
UPDATE: the [email protected] is hcm, I wasn't paying attention, I'll try copying that over and see if I have the same results.... my [email protected] worked on my htc mogul as well... let me give it a shot though
UPDATE2:the number you deleted is your ESN in hex format you'll see it at the top right in service programming just replace it with "number"@hcm.sprintpcs.com and paste it in tethered NAI, sorry for any confusion
johnsongrantr said:
it worked on mine, but it may be something to do with your account.... you can recover via SPRINT RUU which will wipe your phone
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
UPDATE: the [email protected] is hcm, I wasn't paying attention, I'll try copying that over and see if I have the same results.... my [email protected] worked on my htc mogul as well... let me give it a shot though
UPDATE2:the number you deleted is your ESN in hex format you'll see it at the top right in service programming just replace it with "number"@hcm.sprintpcs.com and paste it in tethered NAI, sorry for any confusion
Click to expand...
Click to collapse
Nope, still 65/67 errors here with NAI and Tethered NAI of profile 0 being the same string:
[email protected]
There must be something else to change.
I've also tried this to no avail... tried a few different things:
1) tried replacing the Profile 0 NAI with the Profile 1 NAI
2) tried copying the Profile 1 NAI to the Profile 0 Tethered NAI
3) tried copying the Profile 1 NAI to the Profile 1 Tethered NAI
4) tried replacing all Profile 0 settings with Profile 1 settings
5) tried copying Profile 1 settings to Profile 2
Nothing seemed to help.... still errors.
Yep...same for me, I've updated the tethered NAI in both profile 0 and 1, reset the phone, waited for a half hour, and still get the error 67. Keep on brainstorming guys, we'll beat this thing
can anyone put the rapid share files up on a different server or sharing place, rapid share is terrible. plus i can't download. it says there are no more open slots to download from. i need the qspt and the drivers. thanks in adavance
WRMG3 said:
can anyone put the rapid share files up on a different server or sharing place, rapid share is terrible. plus i can't download. it says there are no more open slots to download from. i need the qspt and the drivers. thanks in adavance
Click to expand...
Click to collapse
Here you go man, this is to a zip file called "HTC Stuff" that has both QPST 2.47.323 and the HTC Diag Drivers.
http://www7.zippyshare.com/v/50608704/file.html
thanks man, i figured i would give this a try when i got home. rapid share for some reason wouldn't let me download it and kept telling me that i had to be a premium member to download the files.
have you had any luck getting this to work on your phone?
WRMG3 said:
thanks man, i figured i would give this a try when i got home. rapid share for some reason wouldn't let me download it and kept telling me that i had to be a premium member to download the files.
have you had any luck getting this to work on your phone?
Click to expand...
Click to collapse
Nope, no luck yet. I along with a few others have had the same resulting 65/67 errors after updating the NAI settings on both profiles, so still now it's a no-go. I don't know if it's working on anyone's CDMA Hero at this point, so we may have to wait until it is rooted, which I can only imagine when that will happen, although hopefully soon!
well after talkin to htc and verizon for a few hours , i found out y the mms messeges werent being sent,, its cuz when we ported the sprint roms it changed the MMSC URL
to sprintpcsmms it should be http://mms.vtext.com/servlets/mms"
so its tryin to send them through sprint
the problem is tryin to edit it , but im sure there are people here who can figure it out
we need the url for verizon http://mms.vtext.com/servlets/mms
if u have stock mms apk u can see this in settings /connections
im wondering if we take out the apn from the rom we are porting put ours in its place ,resign the rom , then port if it will work, has anyone tried this ?
sorry just my two cent on this
already tried it, but heres the info on how to change it. i couldnt tell if it actually worked, the only people i waS ABLE TO test with was the same people who i had no issues with mms
Code:
adb shell
cd /data/data/com*telephony/databases
sqlite3 telephony.db
update carriers set
mmsc='http://mms.sprintpcs.com?X-MDN=YOUR11DIGITNUMBER'
<http://mms.vtext.com/serverlets/mms?X-MDN=YOUR11DIGITNUMBER%27> where
name='Production'
*input your phone number example 13303214294 dont
forget the'*
adb reboot
anonomouse said:
already tried it, but heres the info on how to change it. i couldnt tell if it actually worked, the only people i waS ABLE TO test with was the same people who i had no issues with mms
Code:
adb shell
cd /data/data/com*telephony/databases
sqlite3 telephony.db
update carriers set
mmsc='http://mms.sprintpcs.com?X-MDN=YOUR11DIGITNUMBER'
<http://mms.vtext.com/serverlets/mms?X-MDN=YOUR11DIGITNUMBER%27> where
name='Production'
*input your phone number example 13303214294 dont
forget the'*
adb reboot
Click to expand...
Click to collapse
ok my bad i thought they told me something new
nah, its been tried by me a few times, but like i said, feel free to try it. maybe your results will be different
I have tried to send a mms on CyanogenEris and ELB 2.5 Cyanogen, both do not work. I just loaded up ZenEXP-v7 and tried sending one, worked fine. But it has the "HTC" message app not the AOSP one. I think we need to find out what the diffences are.
That connections info is EXACTLY what the APN trick fixes.
It's how I got the first Eris to send a mms msg on Cricket, if you do the apn restore of a verizon ROM, that gets fixed.
pkopalek said:
That connections info is EXACTLY what the APN trick fixes.
It's how I got the first Eris to send a mms msg on Cricket, if you do the apn restore of a verizon ROM, that gets fixed.
Click to expand...
Click to collapse
i know how to patch it ,, i used mmszap , i was lookin for a way to fix it and make it stick in a rom
change the apns-conf.xml under settings/etc
anonomouse said:
change the apns-conf.xml under settings/etc
Click to expand...
Click to collapse
The fix above fixes sprint sense ROMs.
AOSP roms such as ELB need a source code change, not a APN change. Possibly permissions. I suggest we look at koush's work on the Moto Droid's port of CE for clues.
Ok if I am going to try to use MMSZap what do I need to fill in besides the MMSC url
iloveandroid said:
Ok if I am going to try to use MMSZap what do I need to fill in besides the MMSC url
Click to expand...
Click to collapse
thats it only mmsc i did it and it works
well thats what id did then i exited and it said could not save settings
iloveandroid said:
well thats what id did then i exited and it said could not save settings
Click to expand...
Click to collapse
thats weird it worked for me all i did was put in verizons url
iloveandroid said:
well thats what id did then i exited and it said could not save settings
Click to expand...
Click to collapse
go to ur browser, hit menu
choose other scroll to bottom
choose settings
scroll to bottom
choose reset to default
it will clear ur mms setting
u still may need to use apn restore
i just did it and made a back up
now to see if it works on a cooked rom
sorry im just tryin to figure this mms thing out
I'm on stock 2.2 rooted with s-off. To remove software like CityID I connected using 'adb' ,
mounted /system in clockwork recovery and moved the 'apk'
files to another folder. Now after this when I reboot I'm
not able to ##778.can I regain epst
Regards
Ananth
Try ##778#
Same result .##778# also does not work
I had this same problem while trying to get ad free working on my wifes phone. Some how all the messing about in /system changing permissions and creating symbolic links messed up epst and I couldn't get in except by using qualcomm tools on my pc. That was on 2.1...i only got 778 back when I upgraded the radio to 2.5 and flashed to rmk's froyo rom. Even then, I got a weird error when I tried to edit the dun entry...some thing about the radio and failing to enter low power mode...it went away after the first edit. I don't think doing a data wipe or rom flash clears epst data, so I'm guessing it was the radio upgrade that fixed the problem. I do wish someone could tell us what it is about editing stuff in /system that screws up ##778 access...
cantare said:
I had this same problem while trying to get ad free working on my wifes phone. Some how all the messing about in /system changing permissions and creating symbolic links messed up epst and I couldn't get in except by using qualcomm tools on my pc. That was on 2.1...i only got 778 back when I upgraded the radio to 2.5 and flashed to rmk's froyo rom. Even then, I got a weird error when I tried to edit the dun entry...some thing about the radio and failing to enter low power mode...it went away after the first edit. I don't think doing a data wipe or rom flash clears epst data, so I'm guessing it was the radio upgrade that fixed the problem. I do wish someone could tell us what it is about editing stuff in /system that screws up ##778 access...
Click to expand...
Click to collapse
how did u get qualcomm tools to see the phone? i'm using qpst and it's not seeing the phone at all.
and i get teh same error about 'no response from radio; can't enter low power mode' however it won't go away no matter how many times i try to commit.
shortbushemi said:
how did u get qualcomm tools to see the phone? i'm using qpst and it's not seeing the phone at all.
and i get teh same error about 'no response from radio; can't enter low power mode' however it won't go away no matter how many times i try to commit.
Click to expand...
Click to collapse
I got around that error by turning off every possible radio: 3g, wifi, all the gps stuff, and then putting in airplane mode for good measure. Reboot, make sure it's still in airplane-mode/everything off, and then try ##778 again. Don't know if it matters, but I tried to minimize steps in EPST--ie., open only Security and m.ip and edit only the two relevant entries; don't click on or view anything else. When I did all that, I got the changes to stick, and they stayed with the phone thru several upgrade flashes of Virtuous 2.x ROM
As for QPST, it's been a while... but you must plug the phone into usb (can't remember if you need debugging enabled), then dial ##3424#, wait several seconds (might have to install some htc drivers, but you may be able to ignore) then check your device manager for a new COM port called "htc diagnostic interface... and/or just start qpst config, add new port, and select the one that looks right. it will call the phone something different---ffa./surf or something, but you should be able to view and program service info.
I also got this message when i was trying to edit all that crap to get the 3G Mobile HotSpot app to work. what i realized is that it gives me that error only when i back out of the menu that lists the settings. If you are editing, you should edit, then close the text box (click ok) and then commit changes directly from that menu, and not back out.
there seems to be at least 3 users who can't connect to a network after manually upgrading judging from this thread:
http://forum.xda-developers.com/showthread.php?p=13417499
it may be best to wait for an ota upgrade. (and let's not fill with this thread with "it works for me" please.)
i'm currently owner of a phone that can't phone.
MarkusPO said:
there seems to be at least 3 users who can't connect to a network after manually upgrading judging from this thread:
http://forum.xda-developers.com/showthread.php?p=13417499
it may be best to wait for an ota upgrade. (and let's not fill with this thread with "it works for me" please.)
i'm currently owner of a phone that can't phone.
Click to expand...
Click to collapse
I'll update my ota thread
Sent from my Nexus S
I hope google can quickly send all the ota. There should be some people try every efforts by downgrade then upgrade or going thru any path to get the 2.3.4, may finally mess up the phone ...
it seems impossible to downgrade.
google, you broke my phone.
Do you have the correct build number?
Try flash an older ROM first, then flash a known working radio for your phone. Hope that gets your phone working again.
under the battery, it's a gt-i9020
the ssn is i9020gsmh
Manually flashed my Nexus S and now im having poor reception/disconnects on 3G data. Also my GPS didnt improve. Im not rooted and have stock android.
Did I do something wrong while upgrading to 2.3.4? Can i revert to 2.3.3?
I did the manual update for 2.3.3 and 2.3.4 nothing went wrong
i manually done mine and have no such problem.
let's stop with the "i did it, and i'm ok" posts, which if you read in op, you'll see i wrote the same.
i too unable to connect to network. APN still there but i can't connect to network. But i still able to downgrade to previous version. if unable to, try restore from the latest nandroid backup? i manage to restore to my CM7.0.2. im gonna wait for a bit longer~~~
did any of you try to use your SIM in a other phone? did it work?
did any of you requested support of your carrier ?
and did any one delete their APN's(yes all of them,total reset.factory ect ect)
and tryd to retype the apn settings manually??
DID any one of you guys notice you have to set the IPV4 and IPV6 options in APN Editor????
or did any one RESET your sim?(yes you can,there are codes for that.ask your carrier)
if i want to connect to my carrier's APN i have to fide a bit with the setting and leave things out.
like BEN.NL( T-mo) says APN type needs to be: internet.
if i type internet in the APN type.
my network(3G ect) wont work.
i i leave APN type empty.
all works fine.
ghost010 said:
did any of you try to use your SIM in a other phone? did it work?
did any of you requested support of your carrier ?
and did any one delete their APN's(yes all of them,total reset.factory ect ect)
and tryd to retype the apn settings manually??
DID any one of you guys notice you have to set the IPV4 and IPV6 options in APN Editor????
or did any one RESET your sim?(yes you can,there are codes for that.ask your carrier)
if i want to connect to my carrier's APN i have to fide a bit with the setting and leave things out.
like BEN.NL( T-mo) says APN type needs to be: internet.
if i type internet in the APN type.
my network(3G ect) wont work.
i i leave APN type empty.
all works fine.
Click to expand...
Click to collapse
my phone is working, just the 3G reception is very poor and dropping constantly
- didnt try the SIM at any other phones
- didnt request support yet (carriers in Brazil suck, they dont even know the APN settings)
- tried deleting and adding APN now, not enough time to test it yet
i had IP4 in APN
ghost010 said:
did any of you try to use your SIM in a other phone? did it work?
did any of you requested support of your carrier ?
and did any one delete their APN's(yes all of them,total reset.factory ect ect)
and tryd to retype the apn settings manually??
DID any one of you guys notice you have to set the IPV4 and IPV6 options in APN Editor????
or did any one RESET your sim?(yes you can,there are codes for that.ask your carrier)
if i want to connect to my carrier's APN i have to fide a bit with the setting and leave things out.
like BEN.NL( T-mo) says APN type needs to be: internet.
if i type internet in the APN type.
my network(3G ect) wont work.
i i leave APN type empty.
all works fine.
Click to expand...
Click to collapse
i didn't try other simcard because i only have 1. but i do check my APN setting, and it's all the same as previously. i don't know what went wrong, but i will stick to my cm7.0.2.. until next version of cm support 2.3.4. i can't live without CM goodies
everything fine here on 2.3.4 manual update..
i just need to root now.
MarkusPO said:
under the battery, it's a gt-i9020
the ssn is i9020gsmh
Click to expand...
Click to collapse
not really what i meant.
read the sticky.
http://forum.xda-developers.com/showthread.php?t=1056062
There have only been certain variants of 2.3.4 released. If you flashed the wrong one, could be your problem and anyone else that decided to cowboy the upgrade
I am GRI54 I can't wait no longer 3.4.5. Where is OTA!!
Sent from my Nexus S using XDA Premium App
MarkusPO said:
"it works for me"
Click to expand...
Click to collapse
Could be something else bro because it works for me.
If you had kb3 radio you needed to downgrade to kb1 first
Sent from my Nexus S using XDA App
Hello guys,
I have a sim unlocked, bootloader unlocked, 4.5.91 gingerbread, AT&T atrix 4g on Fido network in Canada.
I made the apns using the same apns from when i was using .81 but I can not seem to connect via 3g/2g/gprs. The only way to use the internet is via WIFI.
What do you think is the problem?
try a reboot...
I'v rebooted at least 10 times now
did you make a backup?
You can go into your Mobile Settings and do a 'reset to defaults'.. otherwise, if you made a backup of you system file, you can copy 'apns-config.xml' from /System/etc to the same directory on you phone...
I had the same issue, I just did the 'reset to defaults' and got my apns back.. but going to copy my previous apns-config.xml file cus that had custom apns..
hope that helps..
I alread have tried reseting to default and adding the APN's again.
as far as system back ups, I dont have one
You can find the apn settings online, i would create a new apn and put those settings you find in. I had issues with mine, and when I did that, it fixed my problems. I put a link below that has the apn settings.
androidforums.com/htc-inspire-4g/276917-inspire-4g-apn-settings.html
Edit: sorry, I didn't realize you weren't using att...but same idea, just manually set up your apn network
Also, you could have the wrong mobile radio installed. I know that they are set to pick up certain frequencies and that radio might not work on fido.
Sent from my MB860 using XDA Premium App
HungryEel said:
I alread have tried reseting to default and adding the APN's again.
as far as system back ups, I dont have one
Click to expand...
Click to collapse
Hmm.. that is weird, maybe you can pull the apns-config.xml from one of the Bell ROMS or from one of the P-ROMs floating around in Dev section to replace what you have now for APNs... just adb it to /System/etc/ , then reboot and go back into your APN settings to see if doing another reset to defaults will work if they don't show up after the reboot..
DarylT said:
Also, you could have the wrong mobile radio installed. I know that they are set to pick up certain frequencies and that radio might not work on fido.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
How do I check what radio version I have installed?
as far as icons are concerned, I get H+ icon
Go to about phone in settings and its under baseband version. I had a similar but not same problem, which was solved by resetting the apns as that seemed not to work in your case. I would try to flash a new radio.
Sent from my MB860 using XDA App
N_01.77.30P is my baseband.
How do i flash a new radio? sorry for being such a noob
Ah.
Here is a new radio:
http://briefmobile.com/download-android-2-3-4-gingerbread-for-motorola-atrix-4g
Its at the bottom and for you I would use the .sbf, i have no clue whether this will work with your carrier... If you would prefer a .zip to flash with CWM I can give you one
HungryEel said:
N_01.77.30P is my baseband.
How do i flash a new radio? sorry for being such a noob
Click to expand...
Click to collapse
I have the same problems after 2 day of 4.5.91 update I loss the complete data conection, any apn that I usualy use work, I dont have any idea to solver the problems, work only for wifi, I use a diferent radios and is not solver the problem. I have a atrix AT&T root + bl unlock + 4.5.91 + 30p radio.
Here's a CWM zip file of ton of APNs. Just install and go to your APN list and reset to default. If it's an APN issue. As far as radio, not sure which you need for your area. http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1189497&v=1&libid=1313370618834&out=http%3A%2F%2Fwww.multiupload.com%2FXW7FT9N3Z4&ref=http%3A%2F%2Fforum.xda-developers.com%2Fforumdisplay.php%3Ff%3D997&title=%5BROM%5D%20CHERRY%CF%80%20%26%20%CF%80CRUST%20v0.7%20%5BAT%26T%5D%20%5BINTL%5D%20%5BGB%5D%20%5BD3%20Camera%20w%2F%201080p%5D%20-%20xda-developers&txt=%3CFONT%20size%3D5%3ELarger%20APN%20List%20from%20v0.3%3C%2FFONT%3E&jsonp=vglnk_jsonp_13133705901661
Is not a APN problem, i dont know why but i loss the data connection after upgrade and BL unlock...
if anybody has a solution, please, post it.
Thx
You can get the bell radio from this thread (fruitcakes)
http://forum.xda-developers.com/showthread.php?t=1163009
Make sure that you are using the correct kernel for your phone.
Lastly, these are the fido APN settings I use; they work as a single APN.
name
Fido Internet
apn
internet.fido.ca
proxy
not set
port
not set
username
fido
password
fido
server
not set
mmsc
http://mms.fido.ca
mms proxy
205.151.011.013
mms port
not set
mcc
302
mnc
370
authentication type
not set
apn type
not set
Just a (possibly) stupid question, but after you reset to default and input your apn settings, are you clicking on it so that it is highlighted in green?
If all of that doesn't work, I would try re-flashing whichever rom you are using through CWM recovery and see what happens.