I've been flashing the nightly build on my phone. The last time my phone was working was build 9. I than flashed build 12 and my phone got stuck on MT4G screen. I went ahead and did another full wipe but same result. Now I tried to flash build 9 and I still get same result. In a panic, I formated everything in advanced option and did another flash. Still nothing. I than followed this post in doing a wipe:
remove SD, power down device, SD in card reader, and delete all android created data (android_system; android; dcim->.thumbnails; tmp; data)
put sd back in phone.
boot into recovery
format boot
format system
{back to main menu} - factory reset
then mounts/storage, mount /system, mount /data
install .zip from SD card -> choose (CM-NIGHTLY-X)
then mounts/storage, remount /system (and /data if its not mounted)
install .zip from SD card -> choose (GAPPS)
reboot
win
So now my phone just gets stuck at the MT4G load screen. I can get into clockwork fine and flash but it just no longer will boot. Please help.
if you can boot into clockwork i dont think your bricked....try pushing the 2.x version to your phone and flash a 2.2 rom just to get to a working state.
then try again ?
I literally was going to have a heart attack. I was able to boot into the Nightly build. I guess theres something wrong with my sd card. I figured I try my 16gb card out of HD2 and it worked like a charm. Thanks for responding, I appreciate it.
Theres definitely something wrong with my 32gb Sandisk card. I formatted it with SDformatter to see if I can get it flash my phone and boot properly. Well, back to being stuck at MT4G load screen. The card works fine except for this problem. Now I just formatted 20gbs of music for nothing. FML!
haha no problem, try using HP USb storage format tool
Related
So just wanted to share this in the event anyone else runs into the problem. I was running CWM 2.5 and CM7 RC2 just fine for a while now and I decided to clean my SD card yesterday since I have tons of empty folders from prior app/rom installs. After deleting some folders, my SD card would not be read by the phone. I rebooted and it sent it into a bootloop. Tried to format SD card in recovery and the settings menu, no avail. Tried to partition in adb to correct the issue and /DATA would not mount for the life of me. I could get it to mount via adb, but not in recovery. Any time I tried to factory reset or format DATA, it would say it cant mount the partition.
Anyway, I tried the latest version of CWM (3.8) and it managed to format each partition without any issues. I could then install CM7 without any issues and it booted right up.
So if anyone is experiencing SD card issues when altering the filesystem in any way, try upgrading the recovery image. It would have saved me a good number of hours troubleshooting, but hey at least I learned adb better lol
I am having the same exact problem, bootloop with no way to access card. How did you get CWM updated?
Today I rooted my U8800, I installed Clockworkmod, made a backup, and tried installing a Honeycomb ROM, I put the zip file in my SD card, and booted in recovery mode.
I did the following things: wipe data/factory reset; wipe cache partition, wipe dalvik cache, and tried installing the rom from my SD card, however clockworkmod didn't see the .zip file in my SD card, so I rebooted my phone and it didn't start. Then I chose recovery (from my backup) in Clockworkmod, still didn't work.
I can see the booting screen (it says IDEOS), it stays there for a while and then it just goes black and boots itself again.
Is there any way to fix this issue?
What do you mean by a honeycomb rom? You need CM7, MIUI or Oxygen for your phone which are all gingerbread based and available in the development section of this forum. Honeycomb is for tablets only.
What phone do you have? a regular u8800 or a u8800pro?
Which recovery do you have?
What does the recovery do when you select restore from backup?
Lastly, does the recovery see anything else on the sd card?
PaulMilbank said:
What do you mean by a honeycomb rom? You need CM7, MIUI or Oxygen for your phone which are all gingerbread based and available in the development section of this forum. Honeycomb is for tablets only.
What phone do you have? a regular u8800 or a u8800pro?
Which recovery do you have?
What does the recovery do when you select restore from backup?
Lastly, does the recovery see anything else on the sd card?
Click to expand...
Click to collapse
Right, I thought I could get Honeycomb, I completely screwed up...
I have a regular u8800, Clockworkmod Recovery 4
When I select restore from backup, it just does exactly what it's supposed to do, at the end it says that the recovery was succesful, but I'm still stuck in bootloop.
Yes, the recovery can see different things on my SD card.
If I downloaded CM7, put it on my SD card, and then installed it via CWM, would it work?
Oh and is there a way to access my SD card without my phone actually being turned on?
If it is an external card, use a sd card reader to put files onto it. If not, get an external card and card reader!
You can try wipe userdata, cache and dalvic cache then restore backup, otherwise I would definitely get hold of CM7 from here:
http://forum.xda-developers.com/showthread.php?t=1068766
Oxygen from here:
http://forum.xda-developers.com/showthread.php?t=1149150
MIUI:
http://forum.xda-developers.com/showthread.php?t=1354680
http://forum.xda-developers.com/showthread.php?t=1362963
Install one of them and hopefully you should be back up and working.
I did try wiping userdata, cache, and dalvik cache, however it still doesn't boot...
I'm going to get an SD card reader later today, but I'm not very optimistic since it doesn't boot even with the backup I had from CWM, so I don't think it'll bot with CM7 or something..
So I figured out what my problem was, I didn't put the .zip file in my phone memory, I put it in an external micro-SD card, because I thought that's what I was supposed to do.. so now I'm pretty much screwed.
Is there any way to make CWM search for the .zip on my external SD, or is there any way to access my phone memory without actually booting it?
Vertikal307 said:
Is there any way to make CWM search for the .zip on my external SD, or is there any way to access my phone memory without actually booting it?
Click to expand...
Click to collapse
Since you have ClockworkMod Recovery, I'll assume your bootloader isn't useless: Download {L,X}Ubuntu and burn it on a CD or make a bootable USB. Boot it and put your phone into the pink screen mode: you'll be able to mount the internal SD card. For me, I find Genokolar's CWM to be weird with the external card: the only time I can get it to see the card is if I boot into Android, unmount the card and then do an "adb reboot bootloader" from my computer
qwerty12 said:
Since you have ClockworkMod Recovery, I'll assume your bootloader isn't useless: Download (L/X)Ubuntu and burn it on a CD or make a bootable USB. Boot it and put your phone into the pink screen mode: you'll be able to mount the internal SD card. For me, I find Genokolar's CWM to be weird with the external card: the only time I can get it to see the card is if I boot into Android, unmount the card and then do a "adb reboot bootloader" from my computer
Click to expand...
Click to collapse
I'm going to try this, currently downloading Ubuntu, although I've never used it before, so I'm really scared of just messing everything up.
Thank you SO much guys, especially qwerty12.
I installed Ubuntu and put the CM7 .zip file on my internal memory, and succesfully installed CM7, now my phone booted normally, and I have CM7 installed!
Great stuff,glad you got it sorted
I formatted my sd card in CWR! I then tried to load a new rom. Now I'm stuck in bootscreen and I forgot to save a backup to my computer! Not sure what to do.
supercarrera said:
I formatted my sd card and then tried to load a new rom. Pixel actually. Now I'm stuck in bootscreen and I forgot to save a backup to my computer! Not sure what to do.
Click to expand...
Click to collapse
Wipe cache and dalvik-cache from the recovery. Then try to boot. If that doesn't work you need to fully wipe sadly.
supercarrera said:
I formatted my sd card and then tried to load a new rom. Pixel actually. Now I'm stuck in bootscreen and I forgot to save a backup to my computer! Not sure what to do.
Click to expand...
Click to collapse
You need hold down the "volume up" button and the power button. that will put you in boot mode. then scroll to recovery with volume button and press power. now you can choose "mount and storage" then mount usb. now you can put any flashable rom on your phone. then flash.
If everything fails just go to CWM and wipe everything (/system, /data, /cache, /boot) and flash your favorite ROM or go stock.
Cool
Sent from my Nexus S using XDA
Sorry about 10 reply
Sent from my Nexus S using XDA
Nagative
Sent from my Nexus S using XDA
Yeah I tried loading a couple different roms but it always gets stuck on the bootscreen. I believe it's because I completely wiped out my sd card through CWM.
supercarrera said:
Yeah I tried loading a couple different roms but it always gets stuck on the bootscreen. I believe it's because I completely wiped out my sd card through CWM.
Click to expand...
Click to collapse
Nah. If you really only wiped SD card in cwm your still good to go w/o problems.
Download a ROM for your device (Nexus S or Nexus S 4G) (HINT: To prevent problems with boot looping w/o formating everything download the ROM you were using at the time you wiped the sdcard.)
Connect phone with your pc/lappy.
Go to cwm recovery
Go to Wipe
Hit wipe dalvik-cache
Hit Go back once
Go to mounts & storage
Hit format /cache
*** Steps between the ***s ONLY if you're still bootlooping after installing new ROM (so leave them out the first time, if it fails come back and start at the steps above but include those 3 below this time)
format /system
format /data
format /boot
***
Hit mount /sdcard (might not be necessary if it already says unmount /sdcard)
Hit mount USB storage
Check your pc/lappy, the sd card should pop up now (if not, you're missing drivers, get them from the tutorials on how to flash ROMs around here)
Copy the ROM you downloaded previously to the sd card folder that popped up
Once finished copying hit Unmount on hte phone
Hit Go back once
Hit install zip from sdcard
Hit choose zip from sdcard
Navigate to and then hit the ROM you downloaded
Select Yes
Wait for the process to finish
Hit reboot system now
Yeah it's working! I guess the key was to completely wipe everything. Thanks!
i have a problem and i was wondering if you can help me, i go into clock work mod recovery and i go to wipe data / factory reset and it says formatting /data... formatting /cache then formatting sd-ext then it says E: format_volume: make_extf4fs failed on /dev/block/mmcblk1p2, then formatting / sdcard/. android_secure... error mountting /sdard/. android_secure! and now my phone is stuck at the mytouch 4g boot screen can someone help me please :'( , thank you
Use a normal formatted SD card, put a clean ROM install on it, factory reset again, flash the ROM after it, and it'll boot.
Jack_R1 said:
Use a normal formatted SD card, put a clean ROM install on it, factory reset again, flash the ROM after it, and it'll boot.
Click to expand...
Click to collapse
how do i do that? my phone is s off and do i have to get a new sd card? and thank you for helping
Reformat your SD card in Windows.
Download a ROM of choice, preferrably stable Gingerbread ROM, copy to the formatted SD card.
Load the card into the phone, wipe data, and then flash it.
So I successfully Flashed TWRP on my Galaxy Tab A SMT580. Two issues I'm experiencing tho....
1.) TWRP is unable to mount my internal storage which shows as 0MB. Thus I obviously have no ROM I can boot into. It reads and mounts my SD card and the correct size shows up. Unfortunately I have nothing on my SD card and I can't get ADB Sideload to work.
2.) Which brings me to my next issue whenever I do attempt to boot it says failure to verify. Which is fixed by flashing that DM-Verity zip file. But I can't since it's not on my SD card and, ADB Sideload won't work.
Any thoughts on how to fix these two issues.
I feel stupid having forgotten to put the file on my SD Card prior to flashing TWRP
Silicon Knight said:
So I successfully Flashed TWRP on my Galaxy Tab A SMT580. Two issues I'm experiencing tho....
1.) TWRP is unable to mount my internal storage which shows as 0MB. Thus I obviously have no ROM I can boot into. It reads and mounts my SD card and the correct size shows up. Unfortunately I have nothing on my SD card and I can't get ADB Sideload to work.
2.) Which brings me to my next issue whenever I do attempt to boot it says failure to verify. Which is fixed by flashing that DM-Verity zip file. But I can't since it's not on my SD card and, ADB Sideload won't work.
Any thoughts on how to fix these two issues.
I feel stupid having forgotten to put the file on my SD Card prior to flashing TWRP
Click to expand...
Click to collapse
By default, the data partition on the T580 is encrypted. In order to install a custom ROM, you must first format that partition. Click wipe then format data, type in "yes" and when it finishes, reboot to recovery. Your internal storage should no longer show 0mb.
ok that worked, my internal storage is now mounted, but my SD Card is not. Now I just need to figure out how to get the custom ROM files and the DM Verity file onto my internal storage.
how can I just flash the tablet back to stock recovery and ROM
so I got everything working, I didn't need to flash a rom, it booted to the stock rom, ony issue that remains, is for some reason the WIFI will no longer turn on. When I tap on it in settings to turn it on, it just says its turning on, but never actually turns on. Just hangs there. I can't figure out what to do
anyone ? I really need to get this fixed...should I reflash the stock rom using ODIN, maybe a fresh install will fix it ?
Also, when I plug my tablet into the laptop, it says connected device cannot access data, and the tablet doesn't show up on the laptop, so I have no way to transfer files or anything. It does show up on ADB, I thought about trying to push the files that way, but not sure if thats possible, been a long time since I used ADB.