Related
I have been thinking for a while that i want to paint the front plastics from brown to black and was wondering the best way. If anyone has done or knows something about painting pstic with out fingers getting paint when done
ummmm...there was a guy on here that mentioned about polishing the bezel section and such on here because it was dropped. Turned out pretty good in the end, I would contact the OP on that thread about that.
As far as my experience goes, I had an Acura RSX that I painted the plastic headlights (the shiny inside part) black and various colors for other people and they turned out good. The key thing is to remove the old stuff off first before doing so. you are basically then starting with a fresh canvas. wear latex or nitrile gloves as well. use paint cleaner to really get all the oils and stuff off. a LIGHT coat of primer, and then light passes of paint make all the difference in the world.
Or is the rounding material before glass metal? Im starting to feel its metal instead of plastic?
You know what, it is metal, that's right. I remember that guy anodized his bezel.
SoonHD2 said:
Or is the rounding material before glass metal? Im starting to feel its metal instead of plastic?
Click to expand...
Click to collapse
Definitely metal. You can feel it especially while charging.
Maybe plastic dip. Google it.
Sent from my Transformer TF101 using Tapatalk
I've had my Nexus 4 for well over a month now and I'm just noticing that there's a significant portion of the screen that gathers fingerprints like a detective agency. Far as I know, there hasn't been any mention of the oleophobic coating easily wearing off on the N4, but that's what seems to be happening. The area that's lost it's coating is easily visible when I breathe on the glass to fog it up. I have never used chemicals to clean the glass, only microfiber cloth. Never spilled anything on it. Never used a screen protector on the glass either. My skin oils aren't acid as I'm not an alien.
My question is ... has anyone else seen this issue? And are the after-market coating sprays a viable solution?
I haven't got any solutions for you, but I think the same thing's happening to mine. I've only had it for a few weeks as well, so it's a little bit disappointing at this stage. I would love to know if anyone else has any suggestions. I'll try and get a picture of it.
The Moto X has an interesting glass front. The glass actually covers the entire face and "wraps" around the sides of the phone to the equator of the entire phone. This was commonly referred to as the "zero-gap" or "magic-glass" technology when I was first reading about the phone.
The bezel that we have appears to be painted onto the glass itself. Especially for people like me with the white face, the painted bezel effect really shows off a rather unsightly vertical gap between the painted bezel and the surface of the digitizer, which rests about .5 mm under the glass itself.
I wonder what the glass looks like under the painted bezel. If it was scraped off, do you think it would just be smooth glass enveloping the front of the phone? If so, I wonder why Motorola felt the need to paint the bezel on. That painted bezel looks really cheap to me.
I read rumors that it was wrap around glass but I really don't believe that to be the case - when tapping on it with a metal object, the "wrap around" area sounds distinctly plastic and on the top, you can actually see a distinct area where the plastic is taller than the glass that meets it.
It would be a lot more expensive to create a wrap-around glass piece than it would be to simply do some good plastic forming create tight bezels. I don't think it's glass at all - it's just plastic that's assembled with the glass to some tight tolerances.
Look here:
https://d3nevzfk7ii3be.cloudfront.net/igi/KidY6tB4P22vESDH.huge
Looks/sounds/feels like plastic to me.
binary visions said:
I read rumors that it was wrap around glass but I really don't believe that to be the case - when tapping on it with a metal object, the "wrap around" area sounds distinctly plastic and on the top, you can actually see a distinct area where the plastic is taller than the glass that meets it.
It would be a lot more expensive to create a wrap-around glass piece than it would be to simply do some good plastic forming create tight bezels. I don't think it's glass at all - it's just plastic that's assembled with the glass to some tight tolerances.
Look here:
https://d3nevzfk7ii3be.cloudfront.net/igi/KidY6tB4P22vESDH.huge
Looks/sounds/feels like plastic to me.
Click to expand...
Click to collapse
I disagree. While the teardown picture shows what appears to be plastic, there appears to be an additional layer of something covering the outer rim. Check the bottom right (and even bottom left) corner(s) shown in the picture. In the alternative, the "wrapped" portion of the glass simply doesn't go as far as the equator.
I'm virtually certain there is some "wrapping" going on, largely due to the fact that I'm dealing with a white face. I will stake my life on the fact that there is no horizontal meeting between the glass and the bezel (on the flat portion of the face). I can actually see under the painted bezel and see no leading edge of plastic. The glass just goes until I can't see any further. I agree with you that it sounds like plastic when tapped with metal (I just tested it myself), but that can be easily explained by the mere fact that it is painted with some plastic-like substance.
Finally, I think your statement that the bezel is raised only supports the idea that the bezel is painted atop the surface of the glass. If it weren't, you could theoretically have it be level with the glass, though not necessarily. I really wish someone's teardown would show a close picture of the glass.
its not painted glass or wrap around glass. its a plastic bezel. i know becasue i can lift mine up with my fingernail
I have a white front too. At first I was too a bit angry about that shadow where glass touches the plastic/color, but I learned to live with it I don't really think it is just color. Maybe it's some really thin plastic bezel on top of the glass, but certainly not color. Try to look at some crashtests of Moto X. If you look at damaged bezel, you can see it's not just color but something more solid
eyc said:
I agree with you that it sounds like plastic when tapped with metal (I just tested it myself), but that can be easily explained by the mere fact that it is painted with some plastic-like substance.
Click to expand...
Click to collapse
No, it wouldn't. Painting a glass surface with plastic doesn't make it resonate like plastic. Especially not at the thin layers we're talking about.
Finally, I think your statement that the bezel is raised only supports the idea that the bezel is painted atop the surface of the glass.
Click to expand...
Click to collapse
To raise that tiny little piece of bevel on the top and bottom of the phone, and do all of this wrapping, would be very expensive since it would be pretty sophisticated forming, and from an engineering standpoint, it's a bad idea.
I'd lay money on it being plastic. Easy test, though - go ahead and scrape off your paint and we'll see. I'm not going to do it on mine, though, since it's plastic and will look like hell after that
murso74 said:
its not painted glass or wrap around glass. its a plastic bezel. i know becasue i can lift mine up with my fingernail
Click to expand...
Click to collapse
Well, then. I stand corrected. What do you see when you lift it up? Does the glass extend a tad past the plastic bezel? I guess the plastic bezel is just really thin and tapers off into paper-thinness at the very edge where you see the glass.
eyc said:
Well, then. I stand corrected. What do you see when you lift it up? Does the glass extend a tad past the plastic bezel? I guess the plastic bezel is just really thin and tapers off into paper-thinness at the very edge where you see the glass.
Click to expand...
Click to collapse
Honestly I can't really tell... Seems like plastic. I can slip my thumb nail between the side glasss and the plastic bezel, but I don't really want to pull to hard. I've been meaning to call moto about a replacement
Sent from my XT1058 using Tapatalk
This was one of their marketing things at launch it's zero gap where they "fused" the plastic bezel to the glass for that zero gap feel. The problem is that the bezel doesn't come all the way to the edge of the display so it does create an odd line. This is far more obvious on white than black on black it can only really been seen in direct sunlight.
"Motorola’s unique materials story continues on the front with a fused glass-plastic layer. The front glass and touch panel are fused into the plastic lip which rings the top side of the Moto X. They’re not separate parts, but literally fused together into one. Motorola is very proud of this feature since it results in one unbroken surface instead of the usual pressure-fit plastic ring affair with a raised section or gap."
http://www.anandtech.com/show/7235/moto-x-review
It's plastic. I'm actually quite surprised it's being debated.
Sent from my Nexus 5 using XDA Premium 4 mobile app
My Z008 has got scratches out of nowhere. I always check before placing my phone under pant pockets. Still don't know how come these scratches are appearing. Now looking for a screen guard.
It's the gorilla glass 3 problem, I had the same scratches on my galaxy s5,so I got a tempered glass which is allot better in terms of micro scratches.
But fear not it's not the actual glass that is being scratched but the nano coating on top of the glass which is used to give a soft slide feeling, that's why you only see then with the screen off and from an angle.
The camera lens also gets scratched pretty easily, ad the glossy black plastic frame around the screen also develops small dents even if my phone is in a Ringke case.
I guess they really had to cut corners to give good specs at a cheap price.
DonMigs85 said:
The camera lens also gets scratched pretty easily, ad the glossy black plastic frame around the screen also develops small dents even if my phone is in a Ringke case.
I guess they really had to cut corners to give good specs at a cheap price.
Click to expand...
Click to collapse
Same here. the black bezel is easy scratched . I already have alot of scratches on my screen and almost 70 % on my camera lens. I only have my phone for 2 months . And got a case for it after 2 weeks.
Siddk007 said:
My Z008 has got scratches out of nowhere. I always check before placing my phone under pant pockets. Still don't know how come these scratches are appearing. Now looking for a screen guard.
Click to expand...
Click to collapse
With original zen cover no scratches, both zcreen and camera lens. Only a little scratch from wife's dimond earring near front cam, she forget to close cover before phone call, so for me filmscreen is waste of money and touch felling, useless
Apparently all material very soft. Frame around screen really soft.
jason4962 said:
Same here. the black bezel is easy scratched . I already have alot of scratches on my screen and almost 70 % on my camera lens. I only have my phone for 2 months . And got a case for it after 2 weeks.
Click to expand...
Click to collapse
I have had my phone since mid July and no scratches, black bezel around camera lens still perfect. Phone goes into my pocket every day. I use a dedicated pocket ie: nothing else goes in that pocket.
With the inexpensive Ringke case Impossible to scratch camera bezel or lens when placing phone on its back as it is then inset. For people that carry stuff in pocket with the phone I am sure a case would help prevent scratches. $200 or $300 for the phone spend $10.99 for a case. Lots of people must be buying the case as price has gone up several dollars since I got it.
Tempered Glass protector
If you all are experiencing these micro scratches, it's sort of an inevitable thing. Gorilla glass scratches with grains of sand or little things from your pocket. If you're really worried about your phone, you can purchase a tempered glass screen protector, and a case to fully protect your device!
Case and tempered glass screen protector are a must. Added them as soon as I took my zen out the box
Tempered glass save my screen from crack also.
Even glass broken, but my phone screen is protected.
I've had no issues other then dropping and breaking the screen but the repair guys told me this phone for the cost is really well built with easy repairability
Sent from my ASUS_Z00AD using XDA Free mobile app
I quit using a case months ago (cheap crappy pleather wallet case I bought for it just irritates me, and my wife pinched my clear soft gel case). No scratches on screen, one or two minor dents on the black plastic edges but you'd need a magnifying glass to notice them. Very pleased - my previous phone (black slate iPhone 5) got scratches on it if you as much as looked at it, and silver scratches on slate iodised aluminium looked bloody awful.
i have a cover and dont worry about scratch )
Yea same problem got alot of faint scratches out of nowhere threw a tempered glass on
Have quie a few phones and tablets, every one since the Samsung Galaxy S3 has had a tempered glass screen protector installed.
I know this phone is supposed to be cheap in comparison with say, the note 5, but I don't have around $500AUD to throw away just because I cracked the screen, even $200 to repair is a kick in the nuts....
Those glass protectors have helped a lot of my phones survive intact.
I don't care if I don't notice the scratches when the screen is on.
For those hoping miracles on gorilla glass:
Diamonds only can be scratched by diamonds
Sapphire only can be scratched by sapphire or diamonds
Gorrillaglass can be scratched by the diamonds, sapphire or whatever is harder than GorillaGlass, this is the rule.
Where you can find things harder than gorilla glass?
a Jewelry ? sure,
the floor? - maybe, some dirt particles actually are are sand, in some places sand is composed by limestone someties harder than gorillaglass.
your pockets? very likely specially if you have two cellphones, the sapphire cover on the lens camera easy can scratch the gorillaglass on other phone, also some pencils have diamond particles on its graphite, further DIAMONDS PARTICLES ARE VERY COMMON, SINCE SiNTETIC DIAMONDS ARE USE AS ABRASIVE ON MANY DRILLING TOOLS.
So, protect your gorillaglass if you hate scratches, harder is not warranty to be invulnerable.
Heeyoo!!
So I got the otterbox alpha glass screen protector for my s7 edge and I am really bothered by the dust under it. I didn't install it the person at the store did. So besides the dust the screen protector has been great, it fits cases fine and its sensitivity is pretty good and its clear.
So I noticed a dust spot near the edge, its black and looks like its on the protector itself and not the screen (it is near the more stories arrow in this picture): http://imgur.com/a/bP2TG
Is this just dust/lint or is it something else, it doesn't look like grit to me.
Also recently I saw this piece of dust and It does seem either it just flew in or was there beforehand I didn't notice (its near the flash): http://imgur.com/a/gfxN8
This looks like lint or something.
I don't want to take the protector off unless it breaks or if the adhesive stops working and it peels off, so should i be worried about screen damage if I keep it on? I am just extremely paranoid... :laugh: