Ok so i have a MT3g running Cyans 5.0.7 this is obviously a 32b. Unfortunatley i made the most retarded mistake of trying to flash a new recovery rom 1.7.0 from 1.2.6 and instead of booting in recovery i did it directly from adb shell on my pc while phone was booted on rom. It oddly didnt give me any error messages but when i tried booting in recovery i get the mytouch green logo screen and wont boot. There are no recovery logs tried both commands and i cant update my rom nor can i push the engineering spl because i was told u need to be in recovery for that? Is that it? Is this phones recovery done? What are my options? Thank You in advance!
Btw looked at other posts i promise this is not related.
Phone however does boot to my rom just not in recovery?
boot into fastboot and try flashing it there...
digitaljeff said:
boot into fastboot and try flashing it there...
Click to expand...
Click to collapse
I did it wont allow i dont have engineering spl :S and cant install it unless i am in recovery its amazing really!
Follow this guide and only do the custom recovery steps of it (based on the conclusion that you already have root :0)
http://forum.xda-developers.com/showthread.php?t=756918
Alright guys i figured it out this is what i did THANK YOU SOOOO MUCH to this guy http://forum.xda-developers.com/showthread.php?t=547133
So I have been trying at putting a custom rom and partitioning the phone with LDXE or Ubuntu for about two days now. I have tried several different custom recovery.img files but I keep running into the same issue. I can't flash the recovery through fastboot because the phone isn't rooted. I cannot root the phone because the phone isn't rooted. This is because the rootme tutorials require that you flash the recovery before the phone is ever rooted. Now, whenever I goto the recovery screen I also get an exclamation point over a phone. I read in a few places that this is also a big issue but I couldn't find how to fix it.
So does anyone have any advice on rooting this HTC sapphire 32A?
Mr.Brosnan said:
So I have been trying at putting a custom rom and partitioning the phone with LDXE or Ubuntu for about two days now. I have tried several different custom recovery.img files but I keep running into the same issue. I can't flash the recovery through fastboot because the phone isn't rooted. I cannot root the phone because the phone isn't rooted. This is because the rootme tutorials require that you flash the recovery before the phone is ever rooted. Now, whenever I goto the recovery screen I also get an exclamation point over a phone. I read in a few places that this is also a big issue but I couldn't find how to fix it.
So does anyone have any advice on rooting this HTC sapphire 32A?
Click to expand...
Click to collapse
No, you can't flash a recovery image via fastboot because you have a perfected/non-engineering SPL, but you'd need root flash this.
Could you post the information shown in fastboot and the information in Settings>about?
ok so i wanted to flash clockwork 3.0 but i was still running cm 6.1.1 and now i am stuck at the htc boot screen. i also cant get into recovery please i am begging for help.
please someone i really need help i obviously cant use my warranty obviously so please help me restore this or just get it back to working without a root anything
Dont worry pal.
OK,... AFAIK...... If you have flashed ClockworkRecovery 3, the only ROMs that will work are the 2.3 ROMs,... If you are trying to boot up a 2.2 ROM, it is likely to bootloop.
So boot back into recovery, full wipes, then flash a 2.3 ROM,... If that is what you were planning to do.
If you want to keep your 2.2 ROM on,... flash back to an older Clockwork Recovery,... then try to boot? If you get boot loops, try wiping cache and try again. If it still fails I would just do a fresh flash of your ROM again,... Remember full wipes 1st.
wileykat said:
Dont worry pal.
OK,... AFAIK...... If you have flashed ClockworkRecovery 3, the only ROMs that will work are the 2.3 ROMs,... If you are trying to boot up a 2.2 ROM, it is likely to bootloop.
So boot back into recovery, full wipes, then flash a 2.3 ROM,... If that is what you were planning to do.
If you want to keep your 2.2 ROM on,... flash back to an older Clockwork Recovery,... then try to boot? If you get boot loops, try wiping cache and try again. If it still fails I would just do a fresh flash of your ROM again,... Remember full wipes 1st.
Click to expand...
Click to collapse
the thing was i couldnt even get into recovery because i was running 6.1.1 while on cw3 but i hit simlock from fastboot and that worked but thanks
rajbaba2 said:
please someone i really need help i obviously cant use my warranty obviously so please help me restore this or just get it back to working without a root anything
Click to expand...
Click to collapse
Can you boot into Hboot screen (phone off then volume-down + power)? If yes try to select recovery from the Hboot screen, it should reboot into recovery, if it doesn't and something is wrong with your recovery, Do you have an Eng. Hboot? , if yes do you have Andriod SDK set up and fastboot? If yes, boot into Hboot, select fastboot from the options, then plug in your usb. Once your device is recognized by fastboot:
Code:
fastboot devices
should return a serial number + "fastboot"
then reflash ClockWorkMod Recovery 2.5.1.3( you can download it from here:http://www.koushikdutta.com/2010/02/clockwork-recovery-image.html then place the ClockWorkMod Recovery 2.5.1.3( make sure its named recovery.img) into the tools folder in AndriodSDk where Fastboot is located, then run the command :
Code:
fastboot flash recovery recovery.img
fastboot reboot
once rebooted your probably gonna be stuck at the HTC screen again, pull the battery, then Volume-down+ power back into Hboot, then select recovery from Hboot screen and it sholud reboot into ClockworkMod recovery, then reflash the rom of your choice.
thanks but i already fixed it by pressing sim lock and i have no idea why that worked and i should probably set up adb now right?
rajbaba2 said:
thanks but i already fixed it by pressing sim lock and i have no idea why that worked and i should probably set up adb now right?
Click to expand...
Click to collapse
I would if you haven't.
Sent from my HTC Vision using XDA App
I recently receive my Nexus One back from HTC to fix the power button. Since I received the phone back, I rooted using Super-One-Click , and installed Rom Manager to restore my phone to the rom I was using before I sent my phone away. Everything worked as expected, and my phone was fully restored. I tried to install Trackball wake and unlock from (http://forum.xda-developers.com/showthread.php?t=715117&highlight=trackball) and this is where my problems started. I used Root Manager to install the android.policy.jar and updated the permissions. I rebooted my phone and the phone will not get passed the “X” boot screen. I booted my phone into Bootloader mode (Power + Volume Down) and was going to push a new android.policy.jar file through ADB, but I could not connect to the phone through ADB. I do not believe I ever turned Debugging Mode on while the phone was working properly. I booted my phone into recovery and was going to restore my phone through clockwork recovery only to find out my phone did not have clockwork recovery flashed, but instead it had the stock recovery loaded. I than tried to restore my phone back to a stock image through loading a signed update.zip but that did not work. I than tried to downgrade using the PASSIMG.img method found here (http://forum.xda-developers.com/wik...des_&_Tutorials#Unroot_.2F_Restore_your_Nexus), but my phone currently has hboot-0.35.0017 and will not accept the PASSIMG.img. When I try to load the PASSIMG.img I get an error stating “Main version is older!”. I for some reason cannot get adb to recognize my phone, so I don’t think I can downgrade my hboot. I have been able to get fastboot to recognize my phone, but for some reason the phone will not let my flash any files via fastboot. I would really like to find a way to restore my phone to a stock image so I can start the process over from scratch. I really would like to keep my bootloader locked if at all possible as the phone is still under warranty. Any assistance anyone could provide would be greatly appreciated. Please let me know if I left out any information that would usefully in fixing my problem. Thanks!
HBoot-0.35.0017
Bootloader-Locked
Current Rom Version-2.2.1 (this rom should be rooted)
Recovery Image: Stock
Shortly, you have the ROM faulty, while not having the custom recovery installed and bootloader is still locked. What's worse, ADB daemon isn't running, since you didn't enable USB debug.
In that case, there's not much you can do. You can try to connect ADB - and remember that you can't use ADB when in bootloader, you need to let the phone start booting. You can try to connect through ADB either when the phone is in stock recovery, or when the phone is booting (unsuccessfully). If it doesn't connect - then nothing is left, either unlock the bootloader or return the phone again.
I appreciate the insight. Once the bootloader is unlocked, I will be able to flash an alternate recovery through fastboot, correct? Thanks again for the help.
Update: I went through and unlocked the bootloader, flashed clockwork recovery and restored from my backup. Everything is now working great. Thanks for your help.
I was unlocked and rooted and ready to install CM7. I followed all the instructions in the Official Atrix CM7 OP to the T, but when it rebooted, I got stuck on the boot screen with "unlocked" and the red M logo.
I tried to repeat the process several times and ended kind of giving up, factory wiping, and then trying to restore my backup. It appeared to restore successfully, but when I rebooted the phone now wont boot at all. I can't even get it into recovery. No combination or order of button presses or battery pulls / usb plugins will turn it on. I just have a green light like it's charging but nothing is working.
Is it possible to brick your phone even after you have been successfully unlocked and rooted just while you are trying to install CM7?
Please help. I am really desperate here. . .
jimjenkins said:
I was unlocked and rooted and ready to install CM7. I followed all the instructions in the Official Atrix CM7 OP to the T, but when it rebooted, I got stuck on the boot screen with "unlocked" and the red M logo.
I tried to repeat the process several times and ended kind of giving up, factory wiping, and then trying to restore my backup. It appeared to restore successfully, but when I rebooted the phone now wont boot at all. I can't even get it into recovery. No combination or order of button presses or battery pulls / usb plugins will turn it on. I just have a green light like it's charging but nothing is working.
Is it possible to brick your phone even after you have been successfully unlocked and rooted just while you are trying to install CM7?
Please help. I am really desperate here. . .
Click to expand...
Click to collapse
are you using the right recovery? romracer or rom manager!
i am using the tenfar CWM included in the Atrix 4G Automatic Unlock script package. will this not work?
if not, how do I replace it with the right recovery if I cant even get into the phone?
jimjenkins said:
i am using the tenfar CWM included in the Atrix 4G Automatic Unlock script package. will this not work?
if not, how do I replace it with the right recovery if I cant even get into the phone?
Click to expand...
Click to collapse
no, that the old recovery you can use the rom manager if you have , or romracer latest recovery you can find that in the development section, also ther was instruction in the cm7 thread.
you should have left it alone at the M boot screen because it takes about 5-10min to boot after unlock and flash...
everything you do now will have to be through fastboot DO NOT SBF FLASH ANYTHING!!!
Go here to use Fastboot
then download the system.img and boot.img from here
use fastboot to push the boot.img and system.img to your phone
if it gets stuck at the M boot screen let it sit for at least 10min
EDIT: get Romracer recovery from here and push that through to your phone through fastboot
Yeah youre going to have to fastboot wipe recovery then fastboot flash recovery recovery.img
Just download rom racers and rename it..recovery.img
Sent from my GT-I9100 using xda premium
Great. Sorry to be such a noob, but do I decompress the CWM-recovery-atrix5.zip file and push the recovery.img file that's inside it? or push the CWM-recovery-atrix5.zip itself?
Also - every time I am able to get my phone into fastboot mode, it says my battery is too weak to flash anything. I cant seem to get the battery to charge enough to execute any fastboot commands. Any way around this? a powered usb hub?
jimjenkins said:
Great. Sorry to be such a noob, but do I decompress the CWM-recovery-atrix5.zip file and push the recovery.img file that's inside it? or push the CWM-recovery-atrix5.zip itself?
Also - every time I am able to get my phone into fastboot mode, it says my battery is too weak to flash anything. I cant seem to get the battery to charge enough to execute any fastboot commands. Any way around this? a powered usb hub?
Click to expand...
Click to collapse
If you can borrow another Atrix user's battery, or take yours to an AT&T store and see if they can charge it for you.
If you're able to get back into recovery then you can just flash the zip.
If not, you'll need to extract the recovery.img to use it with fastboot, or just download it directly from the OP in romracer's thread. (The left hand link is just the .img, the right hand side is the CWM .zip) Then place it in the same directory as fastboot.
So I can literally flash a different recovery from within another?
jimjenkins said:
So I can literally flash a different recovery from within another?
Click to expand...
Click to collapse
yes but it MUST be working proper first ! its ok to use rom managers cwm but i just prefer the otherone alawys have but n e way there are only 2 that are current (uptodate )
thoughs 2 and with romracers you can. chose
a color that you like not just blue
Sent from my MB860 using xda premium
Its the recovery from tenfar CWM. When I can get it into recovery it seems to be working - with the obvious exception of successfully installing CM7
So I can flash romracer recovery from inside tenfar recovery?
sorry if im being redundant - just dont want to screw it up!
thanks
Just download rom racers cwm. Img, head into fastboot and then fastboot flash recovery recovery-****** (whatever yer recovery image color u chose is)
Sent from my MB860 using Tapatalk
I was able after a full day of leaving the phone plugged in, to charge it up. Then I flashed the rom racer recovery, rebooted into recovery (new version), installed CM7, installed gapps, and voila! A working CM7 Atrix. thank you soo soo much guys.
Can't boot android/recovery
ClearFire said:
you should have left it alone at the M boot screen because it takes about 5-10min to boot after unlock and flash...
everything you do now will have to be through fastboot DO NOT SBF FLASH ANYTHING!!!
Go here to use Fastboot
then download the system.img and boot.img from here
use fastboot to push the boot.img and system.img to your phone
if it gets stuck at the M boot screen let it sit for at least 10min
EDIT: get Romracer recovery from here and push that through to your phone through fastboot
Click to expand...
Click to collapse
Please help!!!
The phone stuck in boot screen and overheat, then restart.
In recovery mode is just black screen.
Phone has Neutrino 2.6GT+ ROM whit Clemsyn's OC kernel 1.6GHz and it has unlocked bootloader.
Can I change the kernel without booting in os or recovery?
This problem show after I was extracting very big zip file and phone overheat.
firecode95 said:
Please help!!!
The phone stuck in boot screen and overheat, then restart.
In recovery mode is just black screen.
Phone has Neutrino 2.6GT+ ROM whit Clemsyn's OC kernel 1.6GHz and it has unlocked bootloader.
Can I change the kernel without booting in os or recovery?
This problem show after I was extracting very big zip file and phone overheat.
Click to expand...
Click to collapse
I am actually having this same problem.
My warranty-replacement (unrelated ear-piece failure) had 2.3.6 pre-installed. Thinking little of it, I unlocked the BL and rooted the phone as usual. After this, I tried to install a couple of the ROM's (Neutrino and Morrisoft) which I was most happy with on my previous Atrix.
After flashing either Neutrino or Morrislee's ROM, the phone hung on the M screen. Waiting approximately 30 minutes with no change, I pulled the battery.
When trying to enter recovery mode, the phone would state, "entering recovery mode..." Then go black.
I ended up using RSDLite and sbf flashing the stock 2.3.6 sbf file back to the phone. Then, I had to re-unlock the bootloader and re-root.
This never happened up to, and including 2.3.4, but did twice last night on these ROM's using 2.3.6, and I've flashed many ROM's and Kernels.
It happened to a lesser extent when trying to flash Clemsyn's stock enhanced kernel to the stock ROM, as I was able to enter recovery mode. Entering recovery mode, it would give errors: mounting cache, mounting system errors, and errors to accessing recovery and recovery log files.
Restore recovery would fail in this state, giving me the above errors as well.
Trying to mount the cache and system in recovery would fail. Trying to format cache and system then mounting these could occur temporarily, but would revert back to unmounted when a restore was attempted.
For these problems I pushed a recovery through fastboot.
Just one word: Fastboot. See if Fastboot works and flash everything from there. Or, as Alterna suggested, flash through RSDLite, but that a little dangerous and can brick your phone if you don't know what you are doing. Hope it helps.
Problem sloved!!!
Alterna said:
My warranty-replacement (unrelated ear-piece failure) had 2.3.6 pre-installed. Thinking little of it, I unlocked the BL and rooted the phone as usual. After this, I tried to install a couple of the ROM's (Neutrino and Morrisoft) which I was most happy with on my previous Atrix.
After flashing either Neutrino or Morrislee's ROM, the phone hung on the M screen. Waiting approximately 30 minutes with no change, I pulled the battery.
When trying to enter recovery mode, the phone would state, "entering recovery mode..." Then go black.
I ended up using RSDLite and sbf flashing the stock 2.3.6 sbf file back to the phone. Then, I had to re-unlock the bootloader and re-root.
This never happened up to, and including 2.3.4, but did twice last night on these ROM's using 2.3.6, and I've flashed many ROM's and Kernels.
It happened to a lesser extent when trying to flash Clemsyn's stock enhanced kernel to the stock ROM, as I was able to enter recovery mode. Entering recovery mode, it would give errors: mounting cache, mounting system errors, and errors to accessing recovery and recovery log files.
Restore recovery would fail in this state, giving me the above errors as well.
Trying to mount the cache and system in recovery would fail. Trying to format cache and system then mounting these could occur temporarily, but would revert back to unmounted when a restore was attempted.
For these problems I pushed a recovery through fastboot.
Click to expand...
Click to collapse
My problem like that and I use automated unlock tool to recover recovery, this recovery show some errors but I successfully flash cwm touch and reinstall Nutrition 2.6GT+