My DX (running Liberty) won't go past the reboot screen, it has been sitting there for at least 15 min. Any ideas on what to do?
NVM...just re-flashed the ROM and got it running again
What have you done to the phone? Rooted, Stock, Roms etc etc, also define reboot screen. Is it the boot animation, or just the M. We will gladly help you out, but you need to be more specific with your problems
Well, glad to hear you got it working again!
Sorry for the vagueness. The screen I was referring to was the screen it goes to right after you reboot out of clockwork; all it said was "Liberty," (so yes, I'm rooted). But yeah, it's running fine now; I tried to download a theme off of a forum and I think it messed with my phone.
Related
I know there are alot of soft brick threads but so far none of the methods have helped me.
I installed bonix 1.6 w/ voodoo and it worked just fine. I didnt like it, so i went into rom manager and told it to flash my recovery that i did before the rom. well when it did this it failed half way through. when i rebooted the stock lock screen came up with the stock wallpaper. but then alot of force closes came up (im assuming because it didnt put everything back on the phone after fail).
I have tryed to flash stock roms, fryo 2.2, j16 roms and still nothing. when the phone boots after oden flash it goes through the bootup process and then goes to a blank screen. when i touch one of the buttons on bottom they all light up and stay on.
oh and i have stock recovery....
am i screwed? and thank you in advance for anything that is helpfull
Did you disable voodoo before flashing the recovery?
i disabled it before i flashed bonix but i didnt before i flashed recovery
anyone? anything?
check this thread out http://forum.xda-developers.com/showthread.php?t=782027
now go to "Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out."
And I recommend step 1 it won't take more than 20 minutes, been there, done that.
thank you!! worked great
So I decided to give Tranquility a test and see how it compares to my currently running ApeX. I followed the usual procedures, data wipe/factory reset.....twice.
then installed TranQ and the TranQ App update.
The phone then boots up and freezes on the animation screen. So i reset it, then it won't boot at all past the Logo screen. Randomly it decides to boot up fine, but then 30 seconds of android and it reboots and freezes up.
So for some reason it won't let me boot into clockwork recovery, so i decide to just do the system only SBF it and be done.
So I've SBF'd it twice now, the first time it did a random restart and froze, and also kept the tranq boot animation. I did the 2nd sbf and it's got rid of the animation screen and back to droid, however the tranq boot logo is there.
I haven't proceeded to reactivate the phone yet, and just leaving it alone it hasn't restarted itself. I'm planning on rerooting and reinstalling clockwork recovery and see if i can get one of my old backups going.
But, any theories to what would have jacked it up so bad? and why the stock moto logo wasn't put back when SBF'ing?
update:
rerooted just fine using Z4, installed clockwork recovery just fine too.
Right now I'm doing a data wipe and reinstalling ApeX 1.3.1 from scratch from clockwork recovery. Then I'm gonna restore one of my backups.
Hopefully all goes well
update:
recovered to my backup just fine. Still didn't get rid of the tranq boot logo, thankfully i had a zip stored away of the stock logo so I installed that.
All is now well in the world.
Lesson from this......if it's working fine, leave yo sht alone!
Logo is stored in different place then a system sbf will update. That's not tranQ 's fault. I still use gummyJar though. Too much blur in TranQ for me
I had the exact same problem when I went from fission to tran q. I literally had to do the. 320 sbf then the. 340 sbf to get tran q to install right. Didn't like it and put fission back on
yea i had to do the same thing comming from fission, and because of it i am just staying on tranquility until Obsidian is more stable, then GOODBYE BLUR :-D
The trick to installing TranQ is to install it over stock. If you try to install it over another custom ROM you will have nothing but problems.
Sent from my DROIDX using XDA App
davidukfl said:
Lesson from this......if it's working fine, leave yo sht alone!
Click to expand...
Click to collapse
I feel your pain, but you shouldn't be discouraged (as long as you Nandroid, Nandroid, Nandroid!).
I also spent a week fiddling with TranQ before giving up due to random reboots. But I went ahead and installed GummyJar. It was worth it!
When you're ready to climb back onto the horse, you should try GummyJar. If you prefer a no-bur ROM, it's probably the best in terms of speed and stability.
well i had tried Gummy before, but it was a little buggy for me. Phone would restart after calls, hardware buttons wouldn't always work and a few other little things.
I actually just switched to Fission and it's pretty brilliant thus far. No problems at all, and the fission manager helps a lot
fmkaiba said:
Logo is stored in different place then a system sbf will update. That's not tranQ 's fault. I still use gummyJar though. Too much blur in TranQ for me
Click to expand...
Click to collapse
IT IS TranQ's fault. It is the only ROM that does this. Before you get rid of Tranq, you have to go in to the tools and set your boot logo back to stock. I have flashed many different ROMs and it is the ONLY ONE that makes sure to "leave its mark," LITERALLY.
had same problem when I went from fission. I had to sbf .32 then sbf .34 then did the tran q and it worked just fine after that. I didn't like it to much so I went back to fission. To get rid of the tran q I just did the same sbf method I did and went back to fission.
z06mike said:
IT IS TranQ's fault. It is the only ROM that does this. Before you get rid of Tranq, you have to go in to the tools and set your boot logo back to stock. I have flashed many different ROMs and it is the ONLY ONE that makes sure to "leave its mark," LITERALLY.
Click to expand...
Click to collapse
You're right on w/this..Its too bad I found out the hard way..
i posted a while back in here, and the help i got didn't do much of anything. so now i'm desperate.
This isn't even my nook color, it's my dads and right now he's pissed because it's bricked more or less.
it boots, and gets stuck at the android screen. NOTHING was done to this other than installing CWM, CM7 and then it just sat there, no one used it for almost 3 months. Then when he tried to turn it on. stuck on android.
i tried holding down the power and N button, but it never boots into recovery.
So i had CM7 and CWM installed to the internal memory (because i couldn't get an sd to work properly)
now, i want to either wipe it and get it back to CM7 where i'll just reinstall everything, or totally wipe everything off it and get it back to stock.
aside from nexus devices, i'm a total n00b so please, i need easy to understand instructions here to get this thing working.
neok44 said:
i posted a while back in here, and the help i got didn't do much of anything. so now i'm desperate.
This isn't even my nook color, it's my dads and right now he's pissed because it's bricked more or less.
it boots, and gets stuck at the android screen. NOTHING was done to this other than installing CWM, CM7 and then it just sat there, no one used it for almost 3 months. Then when he tried to turn it on. stuck on android.
i tried holding down the power and N button, but it never boots into recovery.
So i had CM7 and CWM installed to the internal memory (because i couldn't get an sd to work properly)
now, i want to either wipe it and get it back to CM7 where i'll just reinstall everything, or totally wipe everything off it and get it back to stock.
aside from nexus devices, i'm a total n00b so please, i need easy to understand instructions here to get this thing working.
Click to expand...
Click to collapse
Go here Dummies Guide to 'My Nook Won't Boot' and read.
So I think I've royally F'd my DX. I was going to try rooting and flashing a new rom. I'm not a total noob (rooted gtab, nook color, Le Pan) but this is ****ing me up.
It was running 2.3.3 605 originally. I started out with just root, that seemed fine. I got superuser and busybox installed without a problem. I install clockwockmod and dx bootstrap. I was even able to get CWM 5.0.2 or whatever installed without any trouble like I had read.
I tried reading and following threads but I couldn't fallow on if I was missing steps. I have zero experience with rooting via scripts and I have no intention to learn and would rather go back to stock.
I immediately got problems with rebooting. It would not reboot via the power button. It would go to the Red M then just black screen. But it would boot just fine if I pulled out the battery and tried that way.
I did a factory reset thinking that would help, it didn't. I was still rooted but the problems got worse. Now I boot directly into CWM recovery and have to reboot from in there to get to the OS.
I read some more, thought I had figured more out. Installed Rom manger, installed Liberty3. I'm still booting straight into recovery but when I reboot from there I'm stuck at the spinning Liberty logo.
I need help, I've read and searched, if you want to be a **** have run. But I need my phone fixed. Hold my hand like I'm Hellen Keller and help please.
I would recommend reading the Droid X wiki at the Cyanogenmod website. I had some of the same issues until I followed the downgrade + root method and then installed ROM Manager and CM7 manually through recovery. Good luck!
Sent from my DROIDX using XDA App
Schwazilla said:
So I think I've royally F'd my DX. I was going to try rooting and flashing a new rom. I'm not a total noob (rooted gtab, nook color, Le Pan) but this is ****ing me up.
It was running 2.3.3 605 originally. I started out with just root, that seemed fine. I got superuser and busybox installed without a problem. I install clockwockmod and dx bootstrap. I was even able to get CWM 5.0.2 or whatever installed without any trouble like I had read.
I tried reading and following threads but I couldn't fallow on if I was missing steps. I have zero experience with rooting via scripts and I have no intention to learn and would rather go back to stock.
I immediately got problems with rebooting. It would not reboot via the power button. It would go to the Red M then just black screen. But it would boot just fine if I pulled out the battery and tried that way.
I did a factory reset thinking that would help, it didn't. I was still rooted but the problems got worse. Now I boot directly into CWM recovery and have to reboot from in there to get to the OS.
I read some more, thought I had figured more out. Installed Rom manger, installed Liberty3. I'm still booting straight into recovery but when I reboot from there I'm stuck at the spinning Liberty logo.
I need help, I've read and searched, if you want to be a **** have run. But I need my phone fixed. Hold my hand like I'm Hellen Keller and help please.
Click to expand...
Click to collapse
Don't use ROM manager and don't use dxbootstrap (unless you have usb debugging unchecked). I use d2 bootstrap always. And you will have the occasion of it going in to cwm when you boot phone back up. I dealt with it for while. And cwm should be 2502 or something like that when you're just rooted 605. Did you make a nandroid of your rooted 605 before you tried to flash liberty
? Hopefully you did. Go back to that. Then use d2 bootstrap to get in to recovery, wipe data, cache and dalvik, then select install ip from sd card, then choose zip, then scroll via volume down to the liberty file, select that and flash.
I used directions posted over at Androidforums.com under the All Things Root forum for the Dx. I had a couple of hiccups, but it was user error. I now have Liberty 3 running smoothly on my Dx. Check it out, including the guide and ROM lists.
HTH
chaz_
Schwazilla said:
So I think I've royally F'd my DX. I was going to try rooting and flashing a new rom. I'm not a total noob (rooted gtab, nook color, Le Pan) but this is ****ing me up.
It was running 2.3.3 605 originally. I started out with just root, that seemed fine. I got superuser and busybox installed without a problem. I install clockwockmod and dx bootstrap. I was even able to get CWM 5.0.2 or whatever installed without any trouble like I had read.
I tried reading and following threads but I couldn't fallow on if I was missing steps. I have zero experience with rooting via scripts and I have no intention to learn and would rather go back to stock.
I immediately got problems with rebooting. It would not reboot via the power button. It would go to the Red M then just black screen. But it would boot just fine if I pulled out the battery and tried that way.
I did a factory reset thinking that would help, it didn't. I was still rooted but the problems got worse. Now I boot directly into CWM recovery and have to reboot from in there to get to the OS.
I read some more, thought I had figured more out. Installed Rom manger, installed Liberty3. I'm still booting straight into recovery but when I reboot from there I'm stuck at the spinning Liberty logo.
I need help, I've read and searched, if you want to be a **** have run. But I need my phone fixed. Hold my hand like I'm Hellen Keller and help please.
Click to expand...
Click to collapse
Just re-flash ur phone dude. do you know how to do that? It's a pain in the butt. but it is always failsafe.
Ok, I just started experiencing an issue. I suddenly can't get into recovery. Here is a little back history. My N7 was running CNA 3.6.6 (I know, but...), and I was bored so I decided to try ParanoidAndroid. Well, I have that gotta try something else feeling again, and when I try to get into recovery, it will go to the google screen, then go black for about 10 seconds, then go back to the Google screen and boot up. This happens if I reboot to recovery through the power menu, or getting into recovery from the bootloader. I even tried Quick Boot, in hopes it had some magic I didn't. No luck. The same crap. I even switched from TWRP to clockwork recoveries, and the same crap happens (I tried the same things I did originally).
Also tried through other apps too, like Rom Manager, Rom Toolbox, and TiBu. Everything works, but I am bored with this rom... I have tried turning it off, plugging the N7 into a PC and trying to get into recovery. Again, I can get into the bootloader, but as soon as I select recovery, it goes black, then fully reboots...
Anyone have any ideas? Any help would be greatly appreciated.
Have you tried re-flashing a recovery image, eg TWRP 2.3, from fastboot?
Sent from my Nexus 7
BillGoss said:
Have you tried re-flashing a recovery image, eg TWRP 2.3, from fastboot?
Sent from my Nexus 7
Click to expand...
Click to collapse
Thanks for the reply. I will give this a try (gotta wait until after 10pm...or 17 minutes!). Again, thanks, hope this works.
MetalWych said:
Thanks for the reply. I will give this a try (gotta wait until after 10pm...or 17 minutes!). Again, thanks, hope this works.
Click to expand...
Click to collapse
Scheiße, I reflashed TWRP in fastboot, and I am getting the same result. I think my N7 forgot it has a recovery!? I will try flashing clockwork through fastboot and see if this works. Thanks for your help...
Edit: Clockwork does not help. There is no recovery for me. I am now at a loss. Hopefully someone will have some suggestions...
Finally got my recovery back...damn latest bootloader!
Yeah, this has sucked. I have spent several hours figuring out what the hell went wrong. It turns out its the latest bootloader. Others are having this issue. So, I had to go back to stock (which will erase EVERYTHING) and then had to re-root. Now that my bootloader is back to JRO03D, I am back up and running.
So, the first time I did this route, I decided to take the update and re-root my N7, and ran into the same issue. I could not get into recovery. So, I had to do it all over, this time not taking the update and not updating the bootloaders, and I am now back and already have a ROM running and everything installed.
If you want to go this route, here are a couple of links that will help...
http://rootzwiki.com/topic/28544-guide-nexus-7-bootloadersrecoveriesrootback-to-stock/#entry764328 and go to the Back To Stock section. The next part is for rooting (if you wish to do this yourself)...
http://www.talkandroid.com/guides/misc/how-to-unlock-and-root-the-nexus-7/
I will post this in case anyone has a need for this info...
Unable to get into Recovery after 4.1.2 upgrade... - xda-developers
Any help?