Related
the guide is a simplified step by step approach
for People on Stock ROM
a. you need to put HSPL on your device
b. A compatible Winmo ROM and Radio
below is a guide on how to achieve this
HSPL is a prerequisite before everything else (Latest version recommended) – video guide here
chose your Android build to download (I know there are plenty of them)
share us your experience with them, different builds have different behaviours
pros and cons.
1. Chose your Android Friendly Custom Winmo ROM and Radio
(preferably the one recommended by the Android Builder)
Video guide for Custom ROM flashing
Video Guide for Radio ROM Flashing
(I prefer the latest 2.15 Radio, most Android Builders recommends
this as well, completely eliminates Robot Voice during calls
2. format at least a 4GB sd card (full format fat32)
(I suggest you use a separate sd card when its your first time testing Android)
3. in the root - create a folder named Android. Place all the unzipped files of the build you've chosen here.
(note some build when unzipped will reveal a folder “Android” - just copy this to the root directory of the sd card instead)
4. with device OFF, insert SDCard
5. boot winmo, disable screen brightness - then go to File Explorer - Storage Card
6. click CLRCAD first (nothing will happen visibly - but it will fix robot like voice while on calls)
5. click/run haret
note with step 5 and 6 (there are plenty of dual bootloaders out
there but i prefer to boot android manually as I THINK, this is the best problem free method
if you want a more complex and detailed guide, look here
also look at my signature
Update: a lot of people has reported being able to run Android without HSPL
so long as they have the Stock 3.14 ROM on their device, I have tested this myself.
needs a bit of attention, any newbie android testers. try this simplified guide.
Custom ROMs and flashing your phone with HSPL is NOT REQUIRED!!!
I have T-Mobile US HD2, Stock ROM/Radio - un-formatted SD card (stock 16GB) - and my Android Froyo works just fine!!!
Therefore, I am not sure of how much of this first half of the Guide is actually going to be used.
eenbox said:
Custom ROMs and flashing your phone with HSPL is NOT REQUIRED!!!
I have T-Mobile US HD2, Stock ROM/Radio - un-formatted SD card (stock 16GB) - and my Android Froyo works just fine!!!
Therefore, I am not sure of how much of this first half of the Guide is actually going to be used.
Click to expand...
Click to collapse
Same here, latest stock TMOUS official rom, and running andriod fine from the stock card. Get g-sensor lockups here & there, and robot voice incomming and echo outgoing on calls on Hyperdriod rom, but not on others.
Just DL andriod rom of choice, extract to sd card, and run - see how it works for ya.
Mod Warning
Chaps,
Can we calm it down and post on topic please. Some of you are in breach of the XDA rulebook and I would hate to have to act on it.
Appreciate your cooperation here.
WB
daemonfly said:
Same here, latest stock TMOUS official rom, and running andriod fine from the stock card. Get g-sensor lockups here & there, and robot voice incomming and echo outgoing on calls on Hyperdriod rom, but not on others.
Just DL andriod rom of choice, extract to sd card, and run - see how it works for ya.
Click to expand...
Click to collapse
eenbox said:
Custom ROMs and flashing your phone with HSPL is NOT REQUIRED!!!
I have T-Mobile US HD2, Stock ROM/Radio - un-formatted SD card (stock 16GB) - and my Android Froyo works just fine!!!
Therefore, I am not sure of how much of this first half of the Guide is actually going to be used.
Click to expand...
Click to collapse
can anyone on Stock ROMs WITHOUT hspl able to run Android raise their hands please?
I wrote this guide as I found this method worked for me. as everyone can see
on my avatar, i have the EU HD2 version.
jigners said:
can anyone on Stock ROMs WITHOUT hspl able to run Android raise their hands please?
I wrote this guide as I found this method worked for me. as everyone can see
on my avatar, i have the EU HD2 version.
Click to expand...
Click to collapse
Yes, I did it and running Android without any problems. My HD2 T-MobileUS has the following:
R 2.08.50.08.2
G 15.34.50.070
D 2.10.82076.8G
I did not change anything above and left it as it was when I bought the phone.
I DnLd Android 2.2 en-us Nexus One Build/FRG33 to my SD Card.
I am very pleased with it and really like it as it does seem faster, has many more apps from the Android Store (than WM apps I have found over the years searching the Web) and many are Free. Those that are not free are cheaper than the WM versions.
I did have to transfer my Addresses, Calendar and set up other minor things, no problems.
I am using Android more now than WM. Some of the things that I do not like about Android:
1. Must Power Off and then Power On to get back to WM OS. Whereas going from WM to Android I have an Icon Link. Very time consuming. I tried the Dual boots and still can't get them to work.
2. I would like to uninstall News and Weather but cannot find where it is at as it does not showup when I use AppMonster Pro.
I tried to uninstall AmazonMP3 but it still comes back?
I have uninstalled OpenGlDemos, Abduction, and a few more.
I have tried TaskKill apps and Startup Auditor (Startup Disable and Keep Disabled) and they don't seem to do anything to prevent apps from restarting.
Some of the things I really like about Android:
1. Speed
2. Apps Store (Free Apps) so many (not as many as iTunes but most of what I want and need in a very clean display/format like a lot of Apple apps.)
3. Voice that I use instead of keying in Texting
4. So many more options to customize.
Hope this helps others who are thinking of DnL this OS.
asctony said:
Yes, I did it and running Android without any problems. My HD2 T-MobileUS has the following:
R 2.08.50.08.2
G 15.34.50.070
D 2.10.82076.8G
I did not change anything above and left it as it was when I bought the phone.
I DnLd Android 2.2 en-us Nexus One Build/FRG33 to my SD Card.
I am very pleased with it and really like it as it does seem faster, has many more apps from the Android Store (than WM apps I have found over the years searching the Web) and many are Free. Those that are not free are cheaper than the WM versions.
I did have to transfer my Addresses, Calendar and set up other minor things, no problems.
I am using Android more now than WM. Some of the things that I do not like about Android:
1. Must Power Off and then Power On to get back to WM OS. Whereas going from WM to Android I have an Icon Link. Very time consuming. I tried the Dual boots and still can't get them to work.
2. I would like to uninstall News and Weather but cannot find where it is at as it does not showup when I use AppMonster Pro.
I tried to uninstall AmazonMP3 but it still comes back?
I have uninstalled OpenGlDemos, Abduction, and a few more.
I have tried TaskKill apps and Startup Auditor (Startup Disable and Keep Disabled) and they don't seem to do anything to prevent apps from restarting.
Some of the things I really like about Android:
1. Speed
2. Apps Store (Free Apps) so many (not as many as iTunes but most of what I want and need in a very clean display/format like a lot of Apple apps.)
3. Voice that I use instead of keying in Texting
4. So many more options to customize.
Hope this helps others who are thinking of DnL this OS.
Click to expand...
Click to collapse
1. just like in windows, apps are always runnin in the background. dont believe me? (cntrl+alt+delete). just because u press 'X' doesnt mean it goes away. android simply got rid of the 'X' cus its not needed. pressing the 'X' is almost like pressing the home button on android.
2. its still in development stage so its gonna take a while longer to get a NAND version of android and then u can boot into winmo with an icon. but i have tested mines with autoboot and it loads in exactly 45 secs from winmo with chuckydroid rom. since ur on the stock rom, its slower.
3. and are u sure ur stock rom is performing okay? no robot voice? alien voice on the other end for the caller? all the features work? gps? bluetooth? etc?
I'm running android on stock tmous pretty well. I do have occasional sleep of death.
I just tried YouTube app and the videos are kind of distorted, dunno if it's cuz of me.
Sent from my HTC HD2 using XDA App
asctony said:
Yes, I did it and running Android without any problems. My HD2 T-MobileUS has the following:
R 2.08.50.08.2
G 15.34.50.070
D 2.10.82076.8G
I did not change anything above and left it as it was when I bought the phone.
I DnLd Android 2.2 en-us Nexus One Build/FRG33 to my SD Card.
I am very pleased with it and really like it as it does seem faster, . . . . .
Click to expand...
Click to collapse
this is a very interesting note, as i have the EU version and just could not run
Android on stock rom WITHOUT HSPL. I have read other US HD2 owners reporting as well.
mini_robot said:
1. just like in windows, apps are always runnin in the background. dont believe me? (cntrl+alt+delete). just because u press 'X' doesnt mean it goes away. android simply got rid of the 'X' cus its not needed. pressing the 'X' is almost like pressing the home button on android.
2. its still in development stage so its gonna take a while longer to get a NAND version of android and then u can boot into winmo with an icon. but i have tested mines with autoboot and it loads in exactly 45 secs from winmo with chuckydroid rom. since ur on the stock rom, its slower.
3. and are u sure ur stock rom is performing okay? no robot voice? alien voice on the other end for the caller? all the features work? gps? bluetooth? etc?
Click to expand...
Click to collapse
Yes, I know that WM does not kill all apps when you press 'X'. However, I could kill them and know they were killed.
3. Yes, my stock rom is performing OK. I expected some problems, but have not found any except what I posted. Phone calls, voice, BT all work great.
Thanks for your input.
asctony said:
Yes, I know that WM does not kill all apps when you press 'X'. However, I could kill them and know they were killed.
3. Yes, my stock rom is performing OK. I expected some problems, but have not found any except what I posted. Phone calls, voice, BT all work great.
Thanks for your input.
Click to expand...
Click to collapse
until now, im still confused how a few people is able to run android on stock ROM
many has claimed but i think they have hspl on their device.
jigners said:
until now, im still confused how a few people is able to run android on stock ROM
many has claimed but i think they have hspl on their device.
Click to expand...
Click to collapse
Again, for your peace of mind, I have a stock rom and I have not put HSPL on my HD2. So, believe me or not. I don't need to lie about something like this. I posted just to let others know that it did work on my STOCK TMOUS HD2.
Hspl is needed only to flash a new radio. It's has been agreed that radios from 2.10 - 2.14 were acceptable radios for Android.
Some stock tmous hd2's come with radio 2.10 already meaning u don't need a radio flash. I'm not sure how u are running on radio 2.08 but more power to u if u are. I'm sure ur running on radio 2.10 not 2.08 tho..........
U might want to make sure that radio isn't draining your battery or whether your getting a robot voice on the caller end of your phone calls.
mini_robot said:
Hspl is needed only to flash a new radio. It's has been agreed that radios from 2.10 - 2.14 were acceptable radios for Android.
Some stock tmous hd2's come with radio 2.10 already meaning u don't need a radio flash. I'm not sure how u are running on radio 2.08 but more power to u if u are. I'm sure ur running on radio 2.10 not 2.08 tho..........
U might want to make sure that radio isn't draining your battery or whether your getting a robot voice on the caller end of your phone calls.
Click to expand...
Click to collapse
I have been using Android for about a month now and use my phone, messaging, internet, etc., with no problems. The only problem which I fully understand is the battery drain which I can live with.
My HD2 T-MobileUS has the following:
R 2.08.50.08.2
G 15.34.50.070
D 2.10.82076.8G
I did not change anything above and left it as it was when I bought the phone. I have found over the years flashing my MDA, Wing, Omnia I900 and Jailbreaking my Iphone 3G that sometimes it is not worth changing anything unless you are having problems. Thus, I no longer change stock roms.
Yes, I do still use my Iphone 3G with 3.0.1 and my Omnia. However, the HD2 with Android is far better than any phone with WM for many reasons.
I am very pleased with it and really like it as it does seem faster, has many more apps from the Android Store (than WM apps I have found over the years searching the Web) and many are Free. Those that are not free are cheaper than the WM versions.
I did have to transfer my Addresses, Calendar and set up other minor things, no problems.
Some of the things that I do not like about Android:
1. Must Power Off and then Power On to get back to WM OS. Whereas going from WM to Android I have an Icon Link. I tried the Dual boots and still can't get them to work. Now I use ReBoot and it does shut down and restart in WM. No problem for me as I live with it.
2. I would like to uninstall News and Weather but cannot find where it is at as it does not showup when I use AppMonster Pro.
3. I don't like the way 3D Gallery brings up all phots, Icons, etc. I have tried StudioKUMA .nomedia Manager and .NoMedia that tagged my folders, which I did so individually, and caused me to disable my ringtones.
I tried to uninstall AmazonMP3 but it still comes back?
I have uninstalled OpenGlDemos, Abduction, and a few more.
I have tried TaskKill apps and Startup Auditor (Startup Disable and Keep Disabled) and they don't seem to do anything to prevent apps from restarting. I am trying Startup Manager, too.
Some of the things I really like about Android:
1. Speed
2. Apps Store (Free Apps) so many (not as many as iTunes but most of what I want and need in a very clean display/format like a lot of Apple apps.)
3. Voice that I use instead of keying in Texting
4. So many more options to customize.
Hope this helps others who are thinking of DnL this OS.
asctony said:
2. I would like to uninstall News and Weather but cannot find where it is at as it does not showup when I use AppMonster Pro.
3. I don't like the way 3D Gallery brings up all phots, Icons, etc. I have tried StudioKUMA .nomedia Manager and .NoMedia that tagged my folders, which I did so individually, and caused . . .
Some of the things I really like about Android:
1. Speed
2. Apps Store (Free Apps) so many (not as many as iTunes but most of what I want and need in a very clean display/format like a lot of Apple apps.)
3. Voice that I use instead of keying in Texting
4. So many more options to customize.
Hope this helps others who are thinking of DnL this OS.
Click to expand...
Click to collapse
if you meant the Sense integration of news and weather, i doubt if you can uninstall this
but you can disable this by selecting it not to sync in settings
For the record, I tried many different builds with stock TMOUS ROM and Radio, and I would always get SODs within a few days. Finally changed Radio and ROM and I have been trying every build out there with only a few problems.
An interesting point to consider is that some people have problems with particular builds whereas others don't. For example, the most stable build I've tried is Sergio76's Coredroid, but other people have complained that it's very buggy. For some reason this may be similar to why some people can run Android on stock ROM and Radio, but others can't? Just a thought.
dung8604 said:
For the record, I tried many different builds with stock TMOUS ROM and Radio, and I would always get SODs within a few days. Finally changed Radio and ROM and I have been trying every build out there with only a few problems.
An interesting point to consider is that some people have problems with particular builds whereas others don't. For example, the most stable build I've tried is Sergio76's Coredroid, but other people have complained that it's very buggy. For some reason this may be similar to why some people can run Android on stock ROM and Radio, but others can't? Just a thought.
Click to expand...
Click to collapse
this is the main reason, there is no particular best build to recommend, as there are
too many variables to consider, as with the TMOB US brand HD2, many have even confirmed
that they dont need hspl to run Android. another thing is the Radio, which
also plays a huge role.
so my new untouched htc hd2 is coming on wed, so i can just put an android build on my sd card and run android without the hspl thing or a custom rom?? is this correct??
xxfirerican said:
so my new untouched htc hd2 is coming on wed, so i can just put an android build on my sd card and run android without the hspl thing or a custom rom?? is this correct??
Click to expand...
Click to collapse
at least dats wat dat guy says. id still reccomend you do the method the rest of us do but its your choice.
Hi, I'm thinking of trying out Android, preferably Froyo, on my UK o2 HD2 which I've had for almost a year now.
My current ROM (1.72.206.3) is the most recent, stock o2 upgrade from the HTC Europe site which came with radio version 2.07.51.22_2.
Have any other o2 users tried, hopefully with some success, to run Android from their SD card using just the above ROM and radio versions? If so, what build of Android would you recommend?
Alternatively, if only a flashed non-stock ROM and HSPL installation will make this work, what would be my best way forward to safeguard my warranty and ensure I dont brick my beloved HD2?
Soz to sound like a noob but I've searched this forum but can't find any o2 specific threads like this one - plus I've been looking around XDA, HTCPedia, YouTube (where I can only find people with US T-Mobile handsets, not the European/UK model) et al for a few days now and feel like I'm just going in circles!
Many thanks for any help that might be forthcoming.
I'm on O2 UK.
I couldn't get Android to boot on Radio 2.07, so I installed HSPL 2.08 and flashed Radio 2.15. I kept the stock O2 1.72 ROM from the HTC website, and it works fine.
I'd recommend Bangsters build if you don't want a Sense-based build, or either FroyoStone or mdeejay's Froyo HD or Froyo Sense builds if you do want Sense.
Blimey, I didn't expect such a prompt reply but that's brilliant.
I wish I had raised my question a couple of days ago, as I've been trawling the internet for suggestions for a few days now, so many thanks for that.
I've already installed a dual-boot app so will install your recommended software tomorrow.
PS - I hope this is of help to others out there too.
Hi, I have a HTC HD2 but mine is out of warranty anyway so here it goes,
HSPL 2.08,
Windows ROM "Miri and Dinik V19",
radio 2.12,
sense android rom Mdeejay Evo warm V1.1 with the latest r7.6 kernel,
Non-sense android rom latest Biff froyo rom based on CM6 V1.0 with the same r7.6 kernel,
I do bump into some occasional problems with android but nothing major, hope this helps.
it's all over the forum, but keep in mind you need at least a radio 2.08 to run android. oh, and for a non-sense build, i'd like to recommend hyperdroid v1.6
welcome to android! The way the HD2 is meant to be
latest radio is 2.15, update your hspl to the highest.
This might be personal preferrence but i find desire roms run better on my phone than evo roms
Im using NDeeJays 3.6 Desire HD rom, this rom is now fast and stable with the latest features, it is however lacking the camera and ereader...if you can live with out these, its the best option in my opinion.
If you need your camera have a look at shu8is SHUBcraft 1.5 CM6 final.It is due an update soon as dev has been away for a while but that rom is rock solid and i used as my only rom until i upgraded to the desire HD rom.
Okay, so at the expense of sounding like a numpty, it appears I need to do the following:
1. Sync my phone with my PC as usual.
2. Copy a version of my current 1.72 o2 ROM to my SD card (not sure where in particular though - in the root maybe?) having renamed it leoimg.nbh so that I can uninstall HSLP should I brick my phone and need to return it to o2 under warranty.
3. Install HSPL 2.08 or higher. I have HSLP3-PKG on my desktop ready for this purpose, so hope this should suffice.
4. Once the HD2 restarts then install a new radio ROM, version 2.08 or higher (I have 2.15 ready to go)
5. Reboot the phone again and create a folder called Android in the root of my SD card, and copy over my choice of Android software to same.
6. Restart the phone yet again, navigate using file explorer to the Android folder then run CLRCAD.EXE and thereafter run HaRet.exe, then wait a few mins for android to launch on my HD2.
It all sounds (too) straightforward in hindsight. Even though I've managed to install the brilliant CHTEditor and more on my phone and tweak the registry to some extent, somehow the installation of android seemed quite daunting until now. But I'll give it a go asap and, in the meantime, thanks to those of you who have taken the trouble to contribute to this thread and help me out.
Cheers!
Hey
I am like yourself on HD2 O2 UK. My current setup is in my signature. What I have found though is no matter what setup/android rom I use, I always get regular drop in data. I don't know if any other setup has worked for any of the users where they have no interruptions with data.
May I also suggest getting a task killer and setcpu from market for help with decent battery life.
Nik
Up until recently I always used RMNET builds as the data is much more reliable. However, i upgraded to 2.15 radio and this seems to have virtually eliminated PPP disconnects for me.
Thanks, i will give that a try.
Sent from my HTC HD2 using XDA App
Hey dazzyb2k3
May I ask what RMNET rom do you use?
Nik
Hi, just to say that I managed to install HSPL and radio ROM 2.15 and FroYo was running v.nicely thank you... up until I had an error message advising that "LauncherPro beta has expired" and asks that I download an updated version - which is not easy given that all the phone will let me do is go into either Silent or Airplane mode, reboot or power off (!)
I see that other FroYo users have reported this issue as a major pain in the arse, so I'm trying to see how I can overcome this issue at the mo. However, I'd suggest that others bear this in mind when choosin which Android software to download (plus the fact that, at the mo, I still prefer my HD2's WinMo 6.5, HTC Sense and CHTEditor after all!)
markymunkeypants said:
Okay, so at the expense of sounding like a numpty, it appears I need to do the following:
1. Sync my phone with my PC as usual.
2. Copy a version of my current 1.72 o2 ROM to my SD card (not sure where in particular though - in the root maybe?) having renamed it leoimg.nbh so that I can uninstall HSLP should I brick my phone and need to return it to o2 under warranty.
3. Install HSPL 2.08 or higher. I have HSLP3-PKG on my desktop ready for this purpose, so hope this should suffice.
4. Once the HD2 restarts then install a new radio ROM, version 2.08 or higher (I have 2.15 ready to go)
5. Reboot the phone again and create a folder called Android in the root of my SD card, and copy over my choice of Android software to same.
6. Restart the phone yet again, navigate using file explorer to the Android folder then run CLRCAD.EXE and thereafter run HaRet.exe, then wait a few mins for android to launch on my HD2.
It all sounds (too) straightforward in hindsight. Even though I've managed to install the brilliant CHTEditor and more on my phone and tweak the registry to some extent, somehow the installation of android seemed quite daunting until now. But I'll give it a go asap and, in the meantime, thanks to those of you who have taken the trouble to contribute to this thread and help me out.
Cheers!
Click to expand...
Click to collapse
Yes! This is all correct! except don't name it leoimg.nbh, until you want to flash it back to stock (rare ;P) otherwise it will flash it everytime you enter bootloader!
markymunkeypants said:
Hi, just to say that I managed to install HSPL and radio ROM 2.15 and FroYo was running v.nicely thank you... up until I had an error message advising that "LauncherPro beta has expired" and asks that I download an updated version - which is not easy given that all the phone will let me do is go into either Silent or Airplane mode, reboot or power off (!)
I see that other FroYo users have reported this issue as a major pain in the arse, so I'm trying to see how I can overcome this issue at the mo. However, I'd suggest that others bear this in mind when choosin which Android software to download (plus the fact that, at the mo, I still prefer my HD2's WinMo 6.5, HTC Sense and CHTEditor after all!)
Click to expand...
Click to collapse
Are you using Shubcraft?
If so, there's a fix for that here.....
http://forum.xda-developers.com/showpost.php?p=8698216&postcount=7589
Sorry, should have mentioned earlier that I was using a download called Mattcfroyosense1.7ppp for my Android set-up, and I presume this incorporates an (out-of-date?) loader to kick-start things.
I only installed it late Weds evening and all seemed fine for 36hrs till this confounded error msg started appearing.
Any suggestions? (my first thought is to delete the Andoid folders from my SD card and start from scratch, and maybe download the LauncherPro upgrade asap from Marketplace should it srin back to life..?)
There is a version 1.8 if i'm not mistaken http://forum.xda-developers.com/showthread.php?t=736545
Although I haven't used any other build than darkstones sense builds so never used launcher pro, can you not uninstall launcher pro and use sense as mattc's is a sense build?
Btw, I have looked up that link you kindly supplied and it looks promising (in fact I have found LauncherPro-0.8.1.1 which I hops should be up to the job) but I'm sorry to say that I'm dumbfounded as to where to install it on my device or storage card - the link supplied suggests I need to "make a new directory named "app" in your /root/system/ directory, then copy the Launcher Pro app that I attached to this message to your /root/system/app/ directory. Then reboot and everything should be OK" but I just cannot locate the appropriate folders to drop this .apk file into...
i only stumbled across this today trying to fix the HTC camera issue.
The way i accessed it was to download "super manager" from the market place and used its file manager. The root is actually a higher level than the sd card which can only be accessed with a root file manager.
There is another way to "push" it but thats a bit beyond my knowledge if i'm honest.
Yay! People from the UK on O2
Its such a pain that the search won't let you use 'UK' and 'O2'
What are people using at the moment then?
I'm using,
radio: 2.15.50.14
wm: Energy Rom 21683
Android: FroyoStone Sense - V3.2
I get music stuttering with the above, regular data drops and BSOD every so often on a restart
I then upgraded the kernel to hastarin r8
The only thing I get now is absolutly no data! everything else is perfect though
I tried this ril wrapper for pppd disconnections, new v0.3 but now I get no data and no signal either
What have you guys got?
I would have posted links to all the above but apparently I''m not allowed
I'm also having no data problems on my o2-uk hd2. it was a lot better with old builds.
Ok.....First I will admit I am new at all of this, second , I am a girl. Not that, that is a big deal but you get my drift. I have spent the last 24 hrs trying to find a good version of android 2.2 to install on my HTC HD2. I have tried quite a few versions, only one has installed that was the FroyoSense. However, none of my status lights worked, personal ringtones didn't work, picture preview didn't work. I create themes for the market and wanted to run android on this phone to help me out with my themes.....can anyone point me in the right direction? Thank you so much in advance.......that is if anyone is up as late as I am.... : )
Mickey
Hi Mickey,
The best builds I've used are NexusHD2 1.8 (if you want completely stock Android) and MDJ Froyo HD 4.6 (if you like the HTC Sense look). You will need to flash your HD2 using ActiveSync with a new '.50' radio. They can be found here (2.15.50.14 is the one I'm using). Without the new radio you'll be unable to boot.
I'm currently running MDJ Froyo HD 4.6 and it's quick and stable with pretty good battery life. I experience trouble with 'robot voice' when calling on NexusHD2, however everything else works just fine. Once you get a bit more confident you can have a play with custom kernels and whatever else.
To install one of these builds follow the link and download the package, then extract everything. I take the MicroSD out of my phone and use a card reader plugged into my PC to format the MicroSD FAT32. Quick format works fine for me. Then I copy the files into a folder called 'Android' (do not use all capitals) in the root of the SD card. Then boot into Windows, use file explorer to find your 'Android' folder and run CLRCAD.exe (nothing will happen - that's fine). Then run HARET.exe, click 'yes' when told about an unknown publisher, and it will proceed to boot you into Android.
First boot may take up to 10 minutes, as the device creates a virtual 'phone memory' for your apps and sets up the kernel. Once it's booted and at the lock screen, leave it for fifteen minutes. After fifteen minutes, unlock and power off your phone completely. Rinse and repeat the booting process, and your Android should be working perfectly.
I'll keep an eye on your thread in case you have other questions. Make sure you flash that radio first, or you'll be in all kinds of trouble.
Good luck!
Justin
This is exactly what ive been looking for Juzz. can you elaborate on activesync and the radio more? installation, etc? and that froyo work with gen. y? If not, whats a good dual boot?
Truaim,
ActiveSync isn't actually called ActiveSync anymore, it's Windows Mobile Device Center on Vista and Windows 7.
When you connect your HD2 running Windows to your computer with the USB cable, you are asked (on the phone) what kind of mode you want to select. ActiveSync is first, then USB Mass Storage, Internet Gateway etc. ActiveSync is the mode where you can update new firmwares, install HardSPL, and (if you use them) sync Outlook calendars, mail and contacts.
I am assuming you have HardSPL installed, which you use to flash custom Windows ROMs? It's not necessary (strictly speaking) for Android, but makes flashing radios easier. Let me know if you need me to cover that more.
Android on the HD2 only works with radios that follow the '2.xx.50.xx' format. They MUST have that .50 or you'll run into trouble. Flashing a new radio is just like flashing a new ROM. You download the installer, extract and run CustomRUU.exe, which launches the update process. Your phone needs to be in ActiveSync mode for this to work.
If you follow my previous link to the radio thread, you'll find all the .50 radios at the top. I'd go with the 2.15.50.14 radio first. Download it, connect your phone, unzip and run CustomRUU. Then follow the prompts. Your phone will do a few odd things, reboot and be running the new radio. It doesn't change Windows in any way, shape or form. It just updates your radio. You won't see any changes, except in the 'About' page where it lists the radio version.
Hope this helps!
Justin
Also, I run the 1.66.405.2 Generic WWE HTC Windows 6.5 ROM. I don't use any kind of bootloader (I'd rather be sure CLRCAD was run myself). There are a couple of stripped-down Windows ROMs floating around, but I find battery life isn't affected a whole lot by running a regular Windows ROM.
Cheers.
Just in case the radio package you get doesn't have CustomRUU...
The most recent stock ROM (3.14) is reported by many to be a very good ROM for running Android with. I use it myself and have had 0 issues. (It comes with radio 2.15.50, which is great for Android.)
It also means that, for once, my phone is in a perfectly "legit" state and I could send it off for repair without worry.
And I'm sorry, but there are no "best builds" for Android. The ones that are regularly updated are all running very well, so it depends what you want from it. I'd recommend ignoring recommendations and trying a few different ones yourself, as that's the only way you'll find what you like.
I bought my HD2 used, so I wont be sending it in. in fact, if it were possible id remove windows entirely. where can i see if i already have that radio installed?
Truaim said:
I bought my HD2 used, so I wont be sending it in. in fact, if it were possible id remove windows entirely. where can i see if i already have that radio installed?
Click to expand...
Click to collapse
Reboot your phone and look out for the info in the bottom left of the screen when you get the first white screen with HTC logo. The number next to R is the radio version you have.
My radio is currently 2.8.50.08... is this compatible with mdj sense 4.6 suggested above?
Should be fine mate. Give it a whirl.
Good luck!
my radio is 2.05.51
will this work or do i need to go back to 2.xx.50 ?
stramvaier said:
my radio is 2.05.51
will this work or do i need to go back to 2.xx.50 ?
Click to expand...
Click to collapse
Please read up about subjects before asking questions in future.
It is stated all over the forums that you need at least 2.08.50 (don't use a .51 radio).
Hey all,
I'm usually pretty good at figuring these types of things out, but unfortunately I haven't been able to figure this one out yet.
Wifi works fine in WinMo 6.5 and WinPhone 7. I haven't tried SD version of Android, but I'd rather not go that route as I want to be able to use a fully functioning NAND version of Android.
I have done Task29/wipe data/cache/dalvik cache on many occasions, repartitioned, reinstalled WinMo 6.5 and then started over with MAGLDR (latest version), replaced wifi module libraries, but nothing has proven to work. Everything else is perfect, though.
Somebody has to have experienced this before? I couldn't find much in terms of a solution by searching.
Thanks!
What HD2 Radio version are you using?
What Android ROM are you using?
Have you made sure that it is a MAGLDR version you are trying to install, not the cLK version?
Why would you need to replace the WiFi module librarys as your ROM should work without error after installation?
A bit more info and we should be able to sort this one out!
custommsp said:
Hey all,
I'm usually pretty good at figuring these types of things out, but unfortunately I haven't been able to figure this one out yet.
Wifi works fine in WinMo 6.5 and WinPhone 7. I haven't tried SD version of Android, but I'd rather not go that route as I want to be able to use a fully functioning NAND version of Android.
I have done Task29/wipe data/cache/dalvik cache on many occasions, repartitioned, reinstalled WinMo 6.5 and then started over with MAGLDR (latest version), replaced wifi module libraries, but nothing has proven to work. Everything else is perfect, though.
Somebody has to have experienced this before? I couldn't find much in terms of a solution by searching.
Thanks!
Click to expand...
Click to collapse
Hey. Thanks for joining!
- Radio 2.15.50.14 and one of the older ones which was installed when I picked up this phone
- Roms:
NDT MIUI Froyo V6.2 currently.
Tried [CWR] BOYPPC-SHIFTPDA_GINGER 2.3.4-Sense.s V29 (12.Jun), CMYLXGO's Stock Desire HD(2) NAND ROM v1.1.17 and a few others i can't remember. All MAG versions.
I tried replacing the libs, because i've read that as part of a fix for related wifi problems from earlier this year.
Thanks!
custommsp said:
Hey. Thanks for joining!
- Radio 2.15.50.14 and one of the older ones which was installed when I picked up this phone
- Roms:
NDT MIUI Froyo V6.2 currently.
Tried [CWR] BOYPPC-SHIFTPDA_GINGER 2.3.4-Sense.s V29 (12.Jun), CMYLXGO's Stock Desire HD(2) NAND ROM v1.1.17 and a few others i can't remember. All MAG versions.
I tried replacing the libs, because i've read that as part of a fix for related wifi problems from earlier this year.
Thanks!
Click to expand...
Click to collapse
You have the most common Radio 2.15.50.14 so that isn't the problem.
The fix is mainly for cLK versions so it could use the PPP interface but if you are using MAGLDR then that isn't needed - this alone could be your problem, I reccomend not installing this patch any more?!
I play with roms a lot and normally my errors are due to using a kernel which the rom wasn't developed for - or more recently, frequent drops to the internet.
When my drops happened, I had done nothing different but it seems that a change in CM7 source now addressed my routers security settings differently - I have no idea when it was added and I was lucky enough to find a firmware update for my router which solved the problem.
Out of interest, when you click on wifi, does it say error or does it try to connect and randomly drop? Error would indicate a kernel/radio/hardware problem and dropping or not connecting would possibly indicate router problem.
Possibly, one of the best places to start is the security settings of your router, disable all security and see if it will connect... if it does then apply security - I use WPA2 PSK TKIP and it now works for me!
NDT MIUI Froyo V6.2 & CMYLXGO's Stock Desire HD are quite old (In terms of development), BOYPPC-SHIFTPDA_GINGER 2.3.4-Sense.s V29 is new and updated frequently so i'm unsure why all would have the same problem?!?!.
You could also try my rom located in my signature "HardDroid2" as I have extensively tested this and have no problems (Not trying to punt my rom at all!).
If changing your router settings or no other roms work then it is beyond me as there are only a few combinations af possible hardware/software faults!
Hope this helps
Already installed Is the phone supposed to boot in Airplane mode enabled for the first boot?
Ok, unfortunately the same issue with WiFi. What happens when i turn wifi on is it takes about 15 seconds for the check to appear in the box, then it stays on for about 15 more seconds with no networks showing, then it turns off automatically. The same thing with every rom I've tried, unless I start messing with libs or conf files at which point I get "error" or it doesn't turn on at all.
Thanks!
custommsp said:
Already installed Is the phone supposed to boot in Airplane mode enabled for the first boot?
Thanks!
Click to expand...
Click to collapse
Ummmm... NOPE!
I think your problem is with your radio rom. I would reccomend starting from scratch!
This is what I do and it works fine for me:
Prep SD Card: Format FAT32 and also create a 1GB Ext3 Partition (For apps2SD if needed)
Copy the rom update.zip to FAT32 partition of SD Card & Insert into phone.
Run HSPL3_PKG.exe and install HSPL 2.08
Flash Radio_Leo_2.15.50.14
Run Task 29 - wipe phone
Install MAGLDR 1.1.3
start device (Hold down power button until menu list appears) choose USB Flasher
Install Recovery 150MB System/5MB Cache (ClockworkMod Recovery v4.0.0.0)
Start MAGLDR (Hold down power button until menu list appears) Select "AD Recovery"
Boot ClockworkMod and install update.zip from SD Card.
I'm not trying to teach you how to suck eggs... but maybe there is a little step you may of missed?!?!?
deano309 said:
Ummmm... NOPE!
I think your problem is with your radio rom. I would reccomend starting from scratch!
This is what I do and it works fine for me:
Prep SD Card: Format FAT32 and also create a 1GB Ext3 Partition (For apps2SD if needed)
Copy the rom update.zip to FAT32 partition of SD Card & Insert into phone.
Run HSPL3_PKG.exe and install HSPL 2.08
Flash Radio_Leo_2.15.50.14
Run Task 29 - wipe phone
Install MAGLDR 1.1.3
start device (Hold down power button until menu list appears) choose USB Flasher
Install Recovery 150MB System/5MB Cache (ClockworkMod Recovery v4.0.0.0)
Start MAGLDR (Hold down power button until menu list appears) Select "AD Recovery"
Boot ClockworkMod and install update.zip from SD Card.
I'm not trying to teach you how to suck eggs... but maybe there is a little step you may of missed?!?!?
Click to expand...
Click to collapse
Much appreciated, I'll give this a try.
custommsp said:
Much appreciated, I'll give this a try.
Click to expand...
Click to collapse
I would reccomend re-downloading the files, especially the radio rom as I have a feeling it may be corrupted - don't know why it would work on WP7 though??
Use the HSPL3_PKG.exe to install HSLP 2.08 as it is regarded as the best.
I use Loader 2.10 KSubedi (MAGLDR 1.1.3 Debranded) just for asthetic reasons.
We will get there!!! lol
Same deal, unfortunately. I've noticed that the mac address is "unavailable" at all times, including the 10 secs the wifi is actually on (according to the switch)
custommsp said:
Same deal, unfortunately. I've noticed that the mac address is "unavailable" at all times, including the 10 secs the wifi is actually on (according to the switch)
Click to expand...
Click to collapse
Did you re-download the radio from here?: http://www.multiupload.com/QP0IWGY42F
I don't understand why your wifi works under wm6.5 (which installs during flashing rom) & WP7 (which runs the same way as android nand) but not under android... I would of classed it as a corrupted file and im completely at a loss!!!!
It can't be a hardware fault and there isn't any differences in earlier/later versions of the HD2's wifi module!!!
OK, I admit it.... I'm stumped!
deano309 said:
Did you re-download the radio from here?: http://www.multiupload.com/QP0IWGY42F
I don't understand why your wifi works under wm6.5 (which installs during flashing rom) & WP7 (which runs the same way as android nand) but not under android... I would of classed it as a corrupted file and im completely at a loss!!!!
It can't be a hardware fault and there isn't any differences in earlier/later versions of the HD2's wifi module!!!
OK, I admit it.... I'm stumped!
Click to expand...
Click to collapse
Yep, that file. Maybe I need to install the latest Tmobile 6.5 rom and start from that?
custommsp said:
Yep, that file. Maybe I need to install the latest Tmobile 6.5 rom and start from that?
Click to expand...
Click to collapse
If you install the latest rom and then task 29, you still have the radio version which installed with the rom as task 29 doesn't touch that section!
I remember a couple of years ago when I changed the wifi module on a PSP that it no longer held a mac address when using original Sony firmware... has your device been in for repair?
Just a thought really, i'm grabbing at straws since it really doesn't make sense to me!
deano309 said:
If you install the latest rom and then task 29, you still have the radio version which installed with the rom as task 29 doesn't touch that section!
I remember a couple of years ago when I changed the wifi module on a PSP that it no longer held a mac address when using original Sony firmware... has your device been in for repair?
Just a thought really, i'm grabbing at straws since it really doesn't make sense to me!
Click to expand...
Click to collapse
I'm not sure about its history as I bought it used. Tomorrow is another day with more opportunities to resolve this issue.
Nothing changed by me installing a stock T-mobile WinMo 6.5 then going through the process of converting to NAND android. I found out that I'm not able to save a manual Wi-Fi network entry. Maybe this is a clue for the problem?
Thanks!
custommsp said:
Nothing changed by me installing a stock T-mobile WinMo 6.5 then going through the process of converting to NAND android. I found out that I'm not able to save a manual Wi-Fi network entry. Maybe this is a clue for the problem?
Thanks!
Click to expand...
Click to collapse
Well looking into the kernel, it seems that it will create a custom MAC address for each device to get past the 00:11:22:33:44:55 issue (I don't know what variables it would use to create this but possibly imei???)
There are no really adjustable settings in wpa_supplicant.conf which would help (As far as I can see)
Since you aren't showing a MAC address, it would indicate a problem with your hardware (as no other device has this problem) But why Windows roms would still work is beyond me and the only change in hardware revisions over the life of the HD2 has been to the lcd screen and not the radio hardware.
I have searched and tried to find more information on this but i'm unable to find a conclusive answer or solution
Here is a thought: Download the files which I use from here: http://www.andbuddy.com/files/FOBBu1308083933.html
This contains all the files which I use and a small guide - Please follow ALL the steps as this has given me a 100% working device!
If it still doesn't work after this then I will have to admit that i'm beaten
deano309 said:
Well looking into the kernel, it seems that it will create a custom MAC address for each device to get past the 00:11:22:33:44:55 issue (I don't know what variables it would use to create this but possibly imei???)
There are no really adjustable settings in wpa_supplicant.conf which would help (As far as I can see)
Since you aren't showing a MAC address, it would indicate a problem with your hardware (as no other device has this problem) But why Windows roms would still work is beyond me and the only change in hardware revisions over the life of the HD2 has been to the lcd screen and not the radio hardware.
I have searched and tried to find more information on this but i'm unable to find a conclusive answer or solution
Here is a thought: Download the files which I use from here: http://www.andbuddy.com/files/FOBBu1308083933.html
This contains all the files which I use and a small guide - Please follow ALL the steps as this has given me a 100% working device!
If it still doesn't work after this then I will have to admit that i'm beaten
Click to expand...
Click to collapse
Before doing all of this I have decided to try a SD version of Android. It's producing the same result!
I'm have the same problem . please help us
spellcaster said:
I'm have the same problem . please help us
Click to expand...
Click to collapse
I'm suspecting that the actual wifi related hardware is damaged somewhere, maybe the coaxial cable, at least in my phone.
Do you try solution : http://forum.xda-developers.com/showthread.php?t=827521
i try but i can't do step 6 :
"6. Go to menu Device -> File Explorer. New window will come up."
it not show file
- I Think problem relate with hardware because with the same Room , same Radio , same Wif network other device ok but of me false
- If you have new information or new SOLUTION please send email for me [email protected]
Thanks
I have an HTC HD2. I'd like to run Android so I can use the Intuit credit card processing software....
I'm looking for simple, idiot-proof, acronym-free instructions on finding and installing a current, stable, functional Android...
I'm sure the folks that hang out here all the time know what all the acronyms are, but I'm a touch baffled... I figured out "sd" means the SD card in the phone. But, "NAND", "CWM" "MAGDLR", and some of the arcane terminology is confusing, and I don't know what I NEED to know and what I can safely ignore...
So, I can guess and pick some Android installation (it appears there are dozens of notes touting competing versions) but it would be simpler if someone in here can recommend something for a computer literate user that doesn't want to be a cell phone O/S expert...
Recommendations?
instructions:http://forum.xda-developers.com/showthread.php?t=893948
nand tools:http://forum.xda-developers.com/showthread.php?t=1090783
rom(cm7):http://forum.xda-developers.com/showthread.php?t=933951
rom(miui):http://forum.xda-developers.com/showthread.php?t=1028693
rom(sense):http://forum.xda-developers.com/showthread.php?t=954369
simple flashing order:make hspl 2.08 using hspl4-task 29-flash radio 2.15.....-flash mgldr-flash proper cwr partition for selected rom-if you use eu hd2 make sd-ext partition in sd(this can be done by mgldr)-put your rom.zip in sd-in mgldr choose ad recovery-install zip from sd-choose zip from sd-after installation complete press back then reboot.ask again if you stuck
Not to sound ungrateful 'cause I'm sure there's a lot of useful information in there somewhere, but this is exactly why I'm requesting something idiot-proof...
simple flashing order:make hspl 2.08 using hspl4-task 29-flash radio 2.15.....-flash mgldr-flash proper cwr partition for selected rom-if you use eu hd2 make sd-ext partition in sd(this can be done by mgldr)-put your rom.zip in sd-in mgldr choose ad recovery-install zip from sd-choose zip from sd-after installation complete press back then reboot.ask again if you stuck
Why am I flashing anything?
What is hspl 2.09 and why would I need it?
what on EARTH does "hspl4-task 29-flash radio 2.15" even MEAN?
why do I need a "proper cwr partition"?
and what rom am I selecting?
and on and on......
OK, so I presume the above is either a test or a bit of humor at the uninformed observer's expense (that'd be me)...
So, can I have all this translated from phone geek to dumb end user now?
Again, I presume I can just put Android on the SD card without a lot of pain and anguish, so still wondering what's a good, stable, fully-functional installation that'll run the GoPayment software and let me swipe credit cards through the phone...
my question, did you read the links? i mean really really read them? not just click and say "oh ****, that's a lot of text, i need help?" trust me....read them...then read them again...then read it again. it will start to make sense. your questions--
best read for a lot of your questions (besides what was posted above):
http://forum.xda-developers.com/showthread.php?t=1021837
Why am I flashing anything?
- you said you wanted android. technically you could use an sdcard rom, but he was just trying to give you what you asked for. guess the question should be why are YOU flashing anything?
you should ask - do i want windows mobile and android, only android (get rid of windows mobile all together) or windows phone (wp7) and android. only then can we point you in the right direction.
What is hspl 2.08 and why would I need it?
- read my thread above!!!!!! cuz you can't flash android without it (this is a custom bootloader that allows your windows mobile phone to install magldr or clk which allows you to install android to nand - aka install android to your phone)
what on EARTH does "hspl4-task 29-flash radio 2.15" even MEAN?
ignore the task 29 (i have never done this).
hspl4 will install hspl2.08 to your phone. this unlocks the bootloader. layman's terms - allows you to install magldr or clk to install android (or windows phone 7)
you need a particular radio to make this all work. that radio is 2.15. a radio is what allows your phone to make calls/data/etc. don't ask why this is, this is just the way it is. the radio your phone came with is likely different.
why do I need a "proper cwr partition"?
- cuz this allows you to install android. too small a partition, android won't fit. too large a partition, wasted space. just right partition = all good. you need to READ the rom thread to know what is the right partition.
and what rom am I selecting?
- you need to READ about the flavors of roms. there are a bunch. take one and try it. if it doesn't work, find another.
Again, I presume I can just put Android on the SD card without a lot of pain and anguish,
- yes, this is true
so still wondering what's a good, stable, fully-functional installation that'll run the GoPayment software and let me swipe credit cards through the phone
- beats me. but why not just try something? sdcard roms cannot in anyway hurt your phone.
now go read. and read. and read. and then experiment. good luck.
here is the best idiot proof way to get android on your phone. it is a winmo rom that has android already built in so you wont have to figure out what is what. its so easy even a cave man can do it.
Well, as usual, the secret to getting the right answer is asking the right question. And the trick to asking the right question is knowing most of the answer....
I didn't........
What I'd LIKE to do is have some current, fully functional version of Android available so I can process credit cards through my HD2 using a swiper. Over time, I may attempt to migrate other things to Android - like contacts and such. But initially, I'm just concerned about the CC processing.
So, as I understand what I want to do, putting Android on the SD card will work, and I just need to figure out which one of the umpteen versions is a good one. I'd like a home page that looks at least somewhat like my current Windows page. I"d like the buttons to continue to work as they currently do (as much as possible)....
I went out and started looking at the various SD Android versions here and selected the nexushd2-gingerbread v2.8 one because of a reply in a previous note asking for a "good" Android......
Installed it, and it works fine, although I"m not particularly fond of the home page. Put the GoPayment application on, plugged in the swiper, and ran a charge.... Appears to work fine, so it solves my primary problem...
Now, since I've figured out I'd prefer to use an SD installation, and have one that works, is there a "better" one that I should try? One that looks and feels more like the Windows Mobile 6.5 I'm used to? Or, is there one that has a different look and feel, but some functionality that makes it superior to the others?
This ROM I'm about to recommend dates back to last November...
However, I have tried every SD ROM since that time, used them for either a few hours/days/weeks, and still always returned to this one. It is just flawless, albeit Android 2.2.
Just download it, throw the 'Android' folder into the SD Card, and run the two files (CLRCAD.exe which appears to do nothing, but does enable the sound, and then Haret.exe)
http://forum.xda-developers.com/showthread.php?t=847631&highlight=black+blue
If you decide to move off WinMob, then NANDs are good, but personally I just have a WinMob program which runs on boot and then executes those two files)
Enjoy!
dkperez said:
Now, since I've figured out I'd prefer to use an SD installation, and have one that works, is there a "better" one that I should try? One that looks and feels more like the Windows Mobile 6.5 I'm used to? Or, is there one that has a different look and feel, but some functionality that makes it superior to the others?
Click to expand...
Click to collapse
do you like sense base builds or would you prefer 1 that doesn't have sense like cm7 or a miui ROM?
AmeriCanAndroid seems to be a favorite for a lot of people and is updated rather often but i personally like RafDroid HD found here. if you want to take a look at other android builds for the htc hd2 found here on xda check out this webpage. it will also give you some info about each ROM like the base, build, when it was updated & if it has sense or not. when you find one you want just click it & it will link you back to the page found on XDA.
Am I correct that "Sense" is the user interface used on the Windows Mobile HD2? If so, yes, I like it, but probably because I"m used to it. I'd have to try some different versions with different UIs to see what's most comfortable.
I'm currently running the nexushd2-gingerbread v2.8 one I downloaded yesterday. The UI is enough different that it's taking a little getting used to.
I'll have to give the others you mentioned a try, and go look at the web page that shows the different builds. I"m amazed at how many there are.
Just for fun I downloaded the AmeriCanAndroid 08/1/11 version and put it on the SD card..... Tried to run clrcad.exe and got the "CLRCAD annot be opened" error. Tried haret and got the same error. Both say "Either it is not signed with a trusted certificate, or one of its components cannot be found..."
So, am I missing something simple or is there a problem with this build? I found a couple topics in here about problems with clrcad but they seemed to wander aimlessly without any resolution...
I've now looked through a couple DOZEN topics over the last year with complaints of exactly the problem I'm seeing with clrcad and haret... I don't see a resolution in ANY of them......
Yesterday, copied the files onto the phone for the nexus gingerbread Android, ran clrcad and haret and was up and running.......
Now, I've tried three different builds, including reinstalling the nexus one, and NONE of them will run. I get the same error for clrcad and haret every time.
Shutting down the phone didn't do anything.
I figure there's got to be a simple, obvious answer sitting here but I'm not finding it.
sense for windows mobile & sense for android are two different things. i personally dont know of any android rom or app thats availible in the market that will give you a windows mobile look or feel. i would find a rom that you want and then try & find a video on youtube that matches it so you can see what its like before you go through all the steps to flash it.
did you unzip AmeriCanAndroid or did you leave it in a zip file? i have since moved to nand builds so im going from memory which is starting to fail me in my old age but i think it needs to be unzipped using something like 7-zip. i think you just put the android folder on the root of your sd card. there is a video in the thread that shows you how to do the install. you can find that here.
so you tried to re-install something that worked for you yesterday but now you cant install it again? how long did you wait because with some builds it can take as long as 10-15 mins to install everything correctly. could you give me the steps you took step by step to try to install AmeriCanAndroid? i think thats the only way i would be able to help.
Yesterday I downloaded the Android 7z file. Unzipped it on the PC and let it create an android folder with all the files. Plugged in the phone and copied the android folder to the root of the SD card on the phone. Ran clrcad and haret on the phone and IT WORKED PERFECTLY.........
Today, just to try one of the builds recommended in here I downloaded a different android. did EXACTLY the same thing - unzipped with a 7z unzip, copied it to an android folder in the root of the phone, ran clrcad and got the error. Ran haret and got the same error........
Cleaned off the android folder on the phone, rebooted, tried a soft reset, etc.
Copied the nexus android build from the PC to the phone - EXACTLY AS I DID YESTERDAY WHEN IT WORKED. Ran clrcad and got the error......
I don't know what's going on with the phone or the Android builds or what, but there are a LOT of entries here and elsewhere on the web about people having exactly this problem. And so far I haven't seen the answer that makes this problem go away......
My recollection is that I had EXACTLY the same problem about 6 months ago. Installed an earlier version of Android and after the first time I rebooted the phone I could never get Android to run again. Just got the same clrcad and haret errors...
So, SOMEBODY, what's causing this and how do I get rid of it WITHOUT having to do some hard reset the destroys everything on the phone?
Back up any data on you sd card you need (I.e. pics, vids, music, whatever you feel important.) Download the Panasonic sd formatter and format your sd card. Copy over the android folder that is in the 7zip that you have unzipped. You should be able to boot ok from there.
Sent from my AmeriCan NANDroid HD2 r727 magldr
Formatted from the PC.
Installed the formatter on the PC. Formatted the SD card. MAKES NO DIFFERENCE. Copied the Android folder (the identical folder I copied yesterday) to the SD card, and STILL get exactly the same error from clrcad.....
Is this something that happens a lot? 'Cause so far, the two times I've had Android on this phone this has happened. And there are a LOT of topics out there with exactly this problem, and a lot of unsuccessful "do this" that don't appear to work. Does ANYBODY had a real fix for this? It worked perfectly 24 hours ago, now it doesn't. My BIG concern is that if Android is flaky and unreliable on the SD card I can't use this thing to do credit card processing if it's going to randomly fail and not be bootable.
dkperez said:
Yesterday I downloaded the Android 7z file. Unzipped it on the PC and let it create an android folder with all the files. Plugged in the phone and copied the android folder to the root of the SD card on the phone. Ran clrcad and haret on the phone and IT WORKED PERFECTLY.........
Today, just to try one of the builds recommended in here I downloaded a different android. did EXACTLY the same thing - unzipped with a 7z unzip, copied it to an android folder in the root of the phone, ran clrcad and got the error. Ran haret and got the same error........
Cleaned off the android folder on the phone, rebooted, tried a soft reset, etc.
So, SOMEBODY, what's causing this and how do I get rid of it WITHOUT having to do some hard reset the destroys everything on the phone?
Click to expand...
Click to collapse
your suppose to copy the unzipped android folder to the root of your sd card and not your phone. i think thats why your getting an error.
example: download rom and unzip using 7-zip. take the "Android" folder not AmeriCanAndroid from within that file and drag_drop or copy_paste to the root of your sd card. then using a file manager from within winmo go to the android folder & run clrcad and then haret. it should run fine. you can also use a program called Rundroid that automats some of the work. its a great app that will allow you to dual boot android but i think you might find it useful as well, you can find it here. RunDroid will allow you to run several android builds from your sd, not just 1.
fwiw, I can't (won't) say anything bad about any custom ROM offered on this board. My own favorite (to use) is a personal choice, which doesn't make it superior to any other - though it may be. It's just what I'm used to, what works for me and what I'm satisfied with.
Doesn't matter if you use a stock HD2 WinMo setup, or a custom WinMo ROM on your HD2. An Android SD build won't interfere with it. And so... (personally) I use AmericanAndroid (ACA). It IS used by a majority of folks for good reason. - BUT - I'm trying my best to be careful and clear with YOU that it may not be the best solution for you or anyone else in particular. We don't play favorites on this site for good reason! For me though... it is an extremely easy ROM to implement.
So you're having a bit of trouble with clrcad & haret... No Problemo.
Google is your friend... find and install under WinMo the 'exceller bootloader'. You'll boot WinMo... and then run Exceller. It will shut down WinMo and run clrcad & haret.
Make sure you've properly installed ACA on your SD card first. No need to partition your SD card. Make sure you're clear with the instructions on the first page and be sure to edit the startup.txt file (before installation) to change the LCD pixel density from 167 (default) to 240... unless you have eagle eyes or like tiny icons & text.
This is your simplest solution, and... get to know it a bit before you swap it for something that might (possibly) not be better. There's a reason a majority of users have chosen to use this Android build.
I'd wish you good luck, but luck has nothing to do with these things. Have fun with it! -Rob
Yes, EVERYTHING was copied to the Android folder OF THE SD CARD......
I have no problem installing yet another piece of software to (hopefully) get the necessary clrcad and haret files to run, but THIS WORKED TWO DAYS AGO. Without a bootloader or anything else. It worked.....
And yes, Google is quite effective. It showed me dozens of topics in forums where people complained of EXACTLY the problem I'm having. What it DIDN'T show me was a fix that didn't involve reformatting the SD card, REPLACING the SD card, doing a hard reset on the phone, and (this one I haven't seen before) installing a boot loader to hopefully get around the issue... BTW: all the above with the exception of the boot loader were tried by people with no success.
FWIW: I"m not criticizing any of the Android builds in here. I'm sure they're largely excellent, with slightly different flavors. And they represent a huge amount of work, of which I'm cognizant and appreciative.
I presume the problem is with Windows Mobile, NOT the Android builds, but it would be comforting to have somebody provide a solution to why it works when installed, and doesn't work after a reboot. Did all those other people that had the same problem do what I did six months ago and just give up on Android as being more work than it was worth? This isn't an isolated problem, there are dozens (and probably hundreds) of instances of people not being able to get Android to boot.
Anyhow, I"ll go find an exceller bootloader and try that. Hopefully, the thing is controllable so if things still fail I can get back to Windows...
I spoke too soon....... It's early here (having started this again at 04:00), and maybe my brain just isn't working yet, or it could VERY possibly be that I'm just too stupid to be allowed to mess with this whole thing, but I eventually found a copy of EBL2.1a._PlusUbuntu.CAB and downloaded it to the PC.
Then I went and found instructions on installing a cab file on the HD2. According to them I just COPY the cab file from the folder on the pc to My Documents on the SD card of the phone, then disconnect the phone from the PC, navigate to the folder, and click on the cab file.......
OK, sounds simple enough....... Did so.
Got a popup on the phone that said it was "Installing ..." At the bottom I got "The program is from an unknown publisher... Do you want to continue?"
So, I clicked YES...... Again, fairly idiot-proof........
And got "Installation of EBL2.1a._PlusUbuntu.CAB was unsuccessful."
Nothing else.... Just the message on a blank screen...
I"ll leave out the amount of screaming and swearing I"m doing at this point.....