Database Users

[Q] [REQ] NFS kernel modules for XWKE7

I have been searching for nfs kernel modules for my SGS2 with the XWKE7 firmware. (I want to mount NFS shares on my phone, not share directories from my phone)
But alas, so far I have been unable to find them. Maybe I have not been looking in the right places...
Can anybody help me out here?
Thanx a lot.

yes please, i am also looking for either nfs kernel modules or a kernel for i9100 which was compiled with nfs support. dorimanx claims to have it, but it hasn't
maybe a good site with instructions how to cross-compile nfs.ko and other modules for android?
thanx

[Q] Why not compile the tun.ko module with Asus TF101 ROMs?

Hi all,
I've looked at forums in the DEV section and can find a tun.ko module for an earlier kernel of the TF101. None of the ROMs including Clemsys, Revolver's, Netformer's, Prime's and any other I have download include this module in their kernel builds. I would like for this module to be included, which was in Prime 1.2, but that was for a kernel that is no longer in use and that is for Honeycomb 3.0. So my question to the Devs is, why no compile tun.ko for any and all the ROMs you deploy?
Thanks for your response.
In case people don't know, tun.ko is the module that allows a rooted device use an app like VPNC to log into and create a VPN tunnel through a Cisco VPN Concentrator.
jamdev12

Are you sure, TUN isn't in prime 1.6? I see it listed as added in version 1.4, so I don't think that it would have been removed in updated versions.

All the ROMS you mentioned (clemsyn, PRIME, Revolver) include the tun.ko compiled into the kernel. You do not need any external tun.ko module for VPN to work.
However, the trick to get VPNC to work is to rename the file /system/bin/ip to /system/bin/ip.bak. This causes the /system/xbin/ip to be picked up instead while works fine.

guptaavi,
Thanks for the info. I'm stupidfied and you have enlighten me. I know that sounds corny, but I appreciate the help here, because since I did not see the module in the /system/lib/modules folder, I thought it wasn't compiled. Now I know the difference between compiling it into the kernel and compiling it for the kernel.
jamdev

Hi guptaavi,
So I must be stupid, because I did what you just told me about changing the file name for the /system/bin/ip to ip.bak, but the VPNC widget takes forever to start and it just fails. I know the settings are correct because I can run VPNC on my OG Droid without issues. I'm running CWM7.
Do you have any suggestions?
jamdev12

If tun.ko is build into the system, how do we setup OpenVPN to use tun.ko? How do i tell OpenVPN where the tun.ko file is?
Pls help as im using PRIME 1.8.4.
TIA
JL

bnep.ko kernel module

Hello
Can someone point me in the right direction to learn how to compile a kernel module for the atrix?
I would like to use bluetooth PAN to tether my tablet to my atrix but can't do it without the bnep.ko module.
or if someone who is already set up for it and feeling kind wants to compile it for me (ATT Gingerbread 2.3.4 kernel), that would be great too

faux123 kernels already have BNEP support built-in, check them out.

awesome! thank you. i tried looking in the changelog and did not see it.
I appreciate you pointing me in that direction

I just got version 1.9 of faux and unfortunately there is no bnep0 interface found nor any bnep.ko file for me to run with insmod to enable it.
Any other ideas?

The interface will appear and everything will work when you actually pair with a device and connect it to your phone. At least it works that way on CM7

[Q] help build cp210x.ko on Iconia A500 3.2.1

Hi,
I really need the cp210x.ko module, but I couldn't successfully build it properly for my Iconia A500 with 3.2.1 and 2.6.36.3+ kernel.. I get the following when I tried insmod my cp210x.ko build using ubuntu cross compiler approach:
cp210x: version magic '2.6.36.3+ preempt mod_unload ARMv5 ' should be '2.6.36.3+ SMP preempt mod_unload ARMv7 '
A little search showed that I need to build it in ARMv7, and need to set the kernel config to build SMP kernel. In this thread I saw a few modules offered but couldn't post reply as a new xda-developers user, so I post here. My A500 has already been rooted via the su (version 3) method posted few days ago.
Please help me build the cp201x.ko module - I am kinda stuck..
Bill

Bill,
Might I suggest you look at loading one of the many custom ROM's that will have what you want? If you are rooted, then install CWM (ACER Recovery from the marketplace) which should allow you to load custom ROM's. In order to load the cp201x.ko module you'd have to recompile the kernel and people doing this type of work normally are building custom ROM's.
Anyway, just my 2¢

Thanks for the advice. I am testing Thor ROM at the moment. Cool..
From what I can read and see within various ROMs /system/lib/modules, very few (out of total possible) kernel modules made it to these custom ROMs - mostly to get game controller to work, extra filesystems, or networking protocols. USB-to-serial modules are rare and certainly my search didn't turn up cp210x.
Cross-compiling the kernel source on Gentoo is mentioned to be better supported then ubuntu, due to its crossdev toolkit, as I'm trying to figure out how to specify target ARMv7 instead of ARMv5 I'm defaulting to when cross compiling from Ubuntu's arm-linux-gnueabi-*
I'm wondering if various nice ROM cooks have releases of their modified kernel source - or might be willing to help me build the just the cp210x as a .ko module, e.g. in the .config, "CONFIG_USB_SERIAL_CP210X=m" - I've found a post few months ago where a successful build and insertion of cp210x module was done but he had some problems when initiating communication on it - I fear the worst but hope for the best, and would like to try that myself as I've successfully talked to my device through the cp210x module on Linux.
Or, if any tips on how to build kernel (just the modules really) properly e.g. As Thor's ROM version number hints at need for some custom and virtualized build environment, I'm looking for the quick and dirty solution if cooking ROMs/kernel/ko's has steep learning curve..
Any help much appreciated!
Bill

It looks like I was speeding down the the wrong track last few days
Apparently the /proc/config.z copied off the a500 device was missing something - and how strange that is - so I had to enable SMP and choose Tegra 2 ARM processor using "make menuconfig" to get the vermagic on the build module (e.g. modinfo after successful make modules) to show ARMv7 and SMP, build from my Ubuntu cross-compiling setup. I haven't tested this new cp210x.ko on a500 yet (as it's currently running one of the customized ROMs that has different EXTRAVERSION/vermagic to the stock Acer kernel source version 2.6.36.3 that I'm based on.
I think it'd be really wonderful if various Android kernel and kernel module makers release their kernel config, sync'ed to each ROM or kernel release, so people like me may independently build special purpose kernel modules with more efficiency and accuracy (to target their customized kernel), and we can recontribute back to to a growing list of tested and working modules for corresponding devices.
Bill

Hmm... Silly. It looks like Thor's ROM already has cp210x build-in, not as a loadable module but compiled in. My device is reported to attach to ttyUSB0! How nice
Thanks!
Bill

For those who are interested, the cp210x.ko module build using latest mentioned approach, e.g. modified kernel config.z, generate module that appear to insert correctly into lightspeed and taboonay roms (neither has this USB-to-serial module) - with a little modification of the EXTRAVERSION variable in the Makefile.
Bill

CP210x and GT-P7500
Has anyone got CP210x module working with Samsung Tab GT-P7500? My problem is that the connected USB-device doesn't create node dev/ttyUSB*. I have spent lot of time trying to figure this one out.
I have tried 1) Manually compiling the linux kernel that has cp210x support as a module. After compiling the module I tried insmoding the cp210x.ko to a running kernel, but even though it seemed to load and unload all right, it did not give me the wanted results. It does not create device node /dev/ttyUSB*. I have also tried modifying ueventd.rc for adding this row, but I am guessing it is only relevant for permissions after the node is created.
Also 2) loading cyanogenmod 10 (which should have cp210x support) to tablet but it doesnot create the desired /dev/ttyUSB* node. I can see device file under dev/bus/usb/001/ but the node does not exist.
I am going to try making needed files for building custom kernel and inserting to tablet. However, I have 0 experience on this, I think it can be tough one.
Any help would be welcome, thanks.

Kernel modules for Atheros AR9271 based usb wifi dongles(now in Hundsbuah's kernel)

UPDATE: These modules were added by request to Hundsbuah's kernel here:
http://forum.xda-developers.com/showthread.php?t=2246062
______________________________________________________________________
I was not going to post this because it has limited use for most TF300T owners but it can't hurt so here it is. The attached file(ath9k.tar.gz) contains kernel modules needed to get AR9271 based usb wifi dongles working on the latest stock TF300T kernel(Asus build 10.4.2.20, kernel version 3.1.10). I have tested the modules with this dongle: TP-Link TL-WN722N.
Uncompress the file and you will get an ath9k directory. Inside are the modules, 2 scripts for easy loading and unloading of the modules, and iwconfig compiled for Android. Getting the dongle working goes something like this:
Su to root. Copy htc_9271.hw to /system/etc/firmware. Run the scripts start_ath9k and stop_ath9k to load and unload the modules.
After the modules are loaded, insert the dongle into the keyboard full size usb port and run ifconfig and iwconfig as needed. If wlan0(default android wifi) is on then iwconfig will show the dongle as wlan1.
Note: I did not post this on the Dev forum because I did not develop these modules...I only changed a few lines in 2 modules before compiling them.

ath9k
I have one mtech atab7t tablet with 4.0.4 android(rooted) and 3.0.8+ kernel [email protected] can i add the driver somehow?

kerteszalex said:
I have one mtech atab7t tablet with 4.0.4 android(rooted) and 3.0.8+ kernel [email protected] can i add the driver somehow?
Click to expand...
Click to collapse
Not very likely...you would need to get your kernel source, add ath9k driver support to the kernel config, then fix any compile errors.

bads3ctor said:
Not very likely...you would need to get your kernel source, add ath9k driver support to the kernel config, then fix any compile errors.
Click to expand...
Click to collapse
you can able to make a tutor for me? i am new in these things :/

kerteszalex said:
you can able to make a tutor for me? i am new in these things :/
Click to expand...
Click to collapse
Hmmm...kernel module compiling in 1 easy lesson....not sure it's possible.

bads3ctor said:
Hmmm...kernel module compiling in 1 easy lesson....not sure it's possible.
Click to expand...
Click to collapse
I really need this usb wifi support for my tab :/ i purchased recently more powerful antennas for my router but this tablet lost the signal on the next room :/ sorry for my bad english

kerteszalex said:
I really need this usb wifi support for my tab :/ i purchased recently more powerful antennas for my router but this tablet lost the signal on the next room :/ sorry for my bad english
Click to expand...
Click to collapse
You need the kernel source for your tablet and a way to root your tablet. I did a cursory Google search for the kernel source for your tablet and I can't find it. If you can get the kernel source code for your tablet then it might be possible to compile ath9k modules. If you can't root that tablet then kernel modules won't be useful because there would be no way to load them.

bads3ctor said:
You need the kernel source for your tablet and a way to root your tablet. I did a cursory Google search for the kernel source for your tablet and I can't find it. If you can get the kernel source code for your tablet then it might be possible to compile ath9k modules. If you can't root that tablet then kernel modules won't be useful because there would be no way to load them.
Click to expand...
Click to collapse
the tablet comes with root.i can extract the kernel from it?

kerteszalex said:
the tablet comes with root.i can extract the kernel from it?
Click to expand...
Click to collapse
You need the kernel source code from the tablet manufacturer.

Hello! I have source code for my kernel (Nexus 7 4.2.2) and I successful built module cifs.ko and cp210x.ko, but i can't build module ath9_htc. I add in my nexus_defconfig file
CONFIG_ATH_COMMON=m
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_HTC=m
but after make modules command only atk.ko created.
Sorry for my english.

SpulN said:
Hello! I have source code for my kernel (Nexus 7 4.2.2) and I successful built module cifs.ko and cp210x.ko, but i can't build module ath9_htc. I add in my nexus_defconfig file
CONFIG_ATH_COMMON=m
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_HTC=m
but after make modules command only atk.ko created.
Sorry for my english.
Click to expand...
Click to collapse
I had to comment out a few lines of code in 2 modules to get mine to compile. On the TF300T, it has to do with LED code not present in the stock kernel that is referred to in 2 of the modules. If you use my modules on the TF300T, you will get no LED blinking on the WIFI stick when data is transmitted or received.
EDIT: Newegg has an Atheros AR9271 USB stick for $9.99 with a cradle.
http://www.newegg.com/Product/Product.aspx?Item=N82E16833166068
For anyone wondering what these modules are used for, read this:
http://forum.xda-developers.com/showthread.php?t=1714300

HELP!! Need Kernel Module ath9k for GT-N5110 Galaxy Note 8.0
HELP !!!
Could really use some help. For the life of me I can't compile a kernel module driver ath9k for my USB wireless adapter TL-WN722N. So it can be used by insmod on my rooted Galaxy Note 8.0 GT-N5110 on Kernel 3.0.31 Build BMC9 running android 4.1.2. The source code is available at opensource.samsung. and is listed as the GT-N5110 NA (north america) model. If some one could help me please? I would be forever in your debt... :good:

Hello
When trying to add modules via your script, it gives me an "exec format error" for each module. How can this be fixed?
Device: Asus Padfone A66, Android 4.1.1

hi I am getting some problem with this attach file, i decompressed it and got the directory. but what are the next stapes ? sorry but i am not getting that part to copy to system/etc/firmware. will u make clear the process stapewise?

Sorry for bothering this old thread. I'm trying to get this to work on my OnePlus 3 running Oxygen OS Nougat. I installed Linux on my phone and I would like to install the TP-LINK drivers on it as the inbuilt WiFi module on my phone does not support monitor mode. I connected this WiFi adapter and trying to get it to work. Please help.