20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Device Compatibility
MIO........A700.......WM5.........Work QuickDial.exe Dead
Asus.......535.........WM6.........Work QuickDial.exe Dead
Dopod.....P800W.....WM5.........Work QuickDial.exe Dead
MIO........A501.......WM5......... Work QuickDial.exe Dead
CHT........9100.......WM6..........Work
AT&T......8525.......WM6..........Work
HTC......TYTNII......WM6..........Work
Dell......Axim X51V..WM6..........Work
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Can you please post device compatibility list or is this for a specific device only?
Regards,
Carty..
Thanks man I will try it
let me try it. thx
Mirror please!
here is the mirror.
hope it is useful. maybe u can put it in the 1st post to make it easier?
thanks.
http://w14.easy-share.com/11341771.html
I know it's probably covered somewhere, but with so many posts on the Cube and FTouchFlo, I can't find it.... How do I get the gesture system to work on HTCAlbum after installing FTouchFlo? It's in the list of exclusions properly, but the gestures no longer work; even if I disable FTouchFlo and soft-reset my Kaiser.
Sorry guys. Is the attached file corrupted or not complete?
leo2016 said:
20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Click to expand...
Click to collapse
Will this work on square screens (240x240)
Works really well, thank you!
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
I may have to try this once the results are in....
mauce said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
Click to expand...
Click to collapse
i think the same thing happen to me.
T3D0nG said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Click to expand...
Click to collapse
Readme
# Please Remove Any VER FtouchFlo、FTouchFloConfig
# Please Install HTC HOME
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
WM5
Does this work with wm5 standard oem rom devices?
Is it the original Cube?
Is the media player interactive?
Will have efrosts touchflo installed affect it?
Thanks
It works! I followed all of the instructions in the readme file: Removed the touchflo that I already had on the device (For removing previous touchflo versions: I had my old touchflo in the start up menu in windows, and was having trouble getting rid of it since it was already running. So I cut and pasted touchflo to a different folder, soft reset, and was able to delete it so it wasn't running at start up anymore), already had HTC Home on there, installed the cab installer, went into the touchflo config file and enabled touchflo, did a soft reset, and it works perfectly.
...only thing is the "New E-Mail" and "SMS/MMS" tab seems dead, but it still works from HTC Home.
The "contact" side takes a couple of seconds to come up but thats expected. Everything else works like a charm. Easily the best one-stop .cab installer of the Touch Cube that I've tried so far.
Thanks for the post.
...sorry....I forgot:
It works fine on my AT&T 8525, WM6 offical AT&T Rom. Thanks again!
If you had FtouchFlo installed previously, make sure you delete the exe file from /Windows/Startup and leave the one from the cab installation. My cube worked after that.
ADD Device Compatibility
Works great here. I'm using a Blue Angel running xplode's latest WM6 ROM.
Thanks for the great work!
Friends,
How can I increase the no. of shortcuts available on the Programs tab ?
Thanks in advance,
Kunal
koolvirgo said:
Friends,
How can I increase the no. of shortcuts available on the Programs tab ?
Thanks in advance,
Kunal
Click to expand...
Click to collapse
I don't think this is possible, buy I would love to see this be done
CR7KB24 said:
I don't think this is possible, buy I would love to see this be done
Click to expand...
Click to collapse
How 'bout if you could add another seperate launcher tab with unlimited(maybe, I've added 48 already) shortcuts? Its another tab for tf3d, not a seperate plugin/app. I think I got that, still have to check something, but downside is you have to enter the shortcuts into xml file instead of linking directly from programs list. Good thing about the xml though, you can enter the link, arguments for the link, and an iconpath. If no iconpath is selected, then it will use chosen program's icon. Also with xml, you can save xml file so that after a flash or hard reset, just copy your custom xml back into windows again to get all setup again. I should have it altogether tonight if anyone's interested.
[URL=http://www.mediafire.com/imageview.php?quickkey=2m2zljmmogt&thumb=4]
[/URL]
oh this would be great , im definitely interested
showaco I am def interested as well
thanks
Mike
Ok, here's the files. I started on att manila(which is where tab comes from) and now have it running on non att manila(. This has been tested with ONYX theme which is using the latest htc manila version(1.2.35845.1_1813.6), which is where pics came from. I had up to 48 shortcuts made up, so I don't think it has a limit. It can be an odd number of shortcuts, doesn't have to have 3 on last row.
Its made from the ATT tab that was used for ATT specific links. I removed the ATT links and images. I added the tab icon links for tab bar back into the icons.mode9 file, 61f866ab_manila. Included lua scripts and ATT tab icons (1a5a121d_manila and 2e35e5f2_manila) which you can change to match your theme. The heart of it is the att_tabitems.xml which is where you have to edit your links for the shortcuts. All of files in zip need to be placed into \Windows folder on your phone. I can't make a cab, because you will have to edit the xml file to use this first. You can make shortcuts to open web links, files, folders, or apps. IconPath can point anywhere? or left blank. The softkeys are also set in the xml, so make them what you want. They currently connect to home and programs tabs of tf3d.
Here's some examples of xml, in these I was linking to icons folder I made in root of device named Realize(from the realize icon set).
App Link
Code:
<ATTtabItem
Name="Total Commander"
Path="\Program Files\Total Commander\cecmd.exe"
Arguments=""
IconPath="\Realize\TotalCommander.png"/>
Web Links
Code:
<ATTtabItem
Name="Opera"
Path="\Windows\OperaL.exe"
Arguments="http://m.google.com"
IconPath="\Realize\Opera95.png"/>
<ATTtabItem
Name="Google"
Path=":DEFBROWSER"
Arguments="http://forum.xda-developers.com"
IconPath="\Realize\GoogleNew.png"/>
<ATTtabItem
Name="Ebay"
Path="\Windows\iexplore.exe"
Arguments="http://ebay.com"
IconPath="\Realize\ebay.png"/>
Folder/file links
Code:
<ATTtabItem
Name="Games"
Path="\Windows\fexplore.exe"
Arguments="\Windows\Start Menu\Programs\Games"
IconPath="\Realize\Poker.png"/>
Soft Keys
Code:
<Softkey>
<LSK Path="\Windows\manila.exe" Arguments="--switchtopage Manila://home.page" Text="Home"/>
<RSK Path="\Windows\manila.exe" Arguments="--switchtopage Manila://programs.page" Text="Programs"/>
</Softkey>
You will also have to add this tab page to your 26948339_manila file for tf3d pages. Use the following code, just change page number to fit your xml.
Code:
<Page Order="10" Name="atttab.page" PackageName="HTC" Title="Launcher">
<ComponentReference Name="page" Mode9Path="HTC\ATTtab.mode9" Component="GizmoRoot" SmartComponent="true" />
<ComponentReference Name="icon_normal" Mode9Path="HTC\icons.mode9" Component="ATTAtt_Off" />
<ComponentReference Name="icon_selected" Mode9Path="HTC\icons.mode9" Component="ATTAtt_On" />
<ComponentReference Name="icon_preview" Mode9Path="HTC\icons.mode9" Component="ATTAtt_Preview" />
</Page>
Thanks Showaco.....Great work indeed !!
However, I would like to bother you a bit more.....
- I'm not sure which files I need to replace.
- Is your solution specific to ATT ? I use an unlocked version with original 1.93 ROM.
- I don't have any themes installed....I hope that shouldn't be a deterrent though.
Please help !
- regards,
Kunal
does'nt HD Manila have more program tabs than diamond manila? I am sure i saw this on Vic's latest rom.....
A New Great Work Again
Hi Showaco.
Thanks for the new great work. I am also following your thread on Raphael "BBExtreme 4.0 the REMIX ". I think you nearly solve every details related with manila
Could you please help me to fix "HD People Tab" prb that not works properly at my Diamond, Official ROM 1.35 ?
I do not want to get details here, can I send message to you from PM ?
(I try to find a solution myself by learning , sorry searching manila prg, get into details of m9editor,lua scripts,mode9 file....
But as you can guess, I was not able to find a solution )
Waiting your response,
Many Thanks
Great work Showaco!
One quick question....could you please tell me if it is possible to change the default icon size on the program screen?
I am trying to ditch the square button backgrounds and use larger 128x128 icons.
Any help would be appreciated!
The Cab Version
All the thanks to Showaco for this great application / add-in
For the people like me, how want to have this wonderfull utility, but are afraid to damage their manila (not want to hard-reset their phone).
I want to share my CAB file that is working at my Diamond with Official,Stock Rom Ver 1.35, Manila TF3D 1.0.1630.15, without any themes installed.
This cab is created according to the guide given by Showaco.
This cab will add new Launcher page as page-10, just near to Application Tab. All icons used in that cab are standard icons already install at your phone.
You can try and see if it works for you. Do not worry, UNINSTALL is working perfect, At least works for me.
NOTE: It has also been reported that CAB uninstallation may not work properly in same cases, like using a different language, not English.
But please do not forget that **INSTALL AT YOUR OWN RISK" **
NOTE: This cab will not work if you are using a different language,not English.
So please before trying my cab, please take a full back-up of your phone or at least take the original copy of the following files from your phone "\Windows" folder if it is exist.
"1a5a121d_manila, 2e35e5f2_manila, 4e061a9c_manila, 5e8e48df_manila, 7b1bc561_manila, 36d20e8f_manila, 61f866ab_manila, 586d37b6_manila, 786c5ee1_manila, 7564a2d6_manila, 26948339_manila, att_tabitems.xml
(At my phone, I only find 3 files; 61f866ab_manila, 7564a2d6_manila, 26948339_manila)
sosimple said:
I tried the cab version, with rom 2.03 greek. It totally screw up my phone.. The new tab was added but language went to english , softkey was gone, telephone provider changed, and many other. I uninstalled but some problems still remain so i need format .
Click to expand...
Click to collapse
If it does not work you, then you can create your own CAB.
Here is the installation steps;
Upload CAB to phone
Turn off TF3D
Soft Reset to make sure nothing is still in memory
Install CAB to phone
After installation soft-reset will be asked.
Turn on TF3D
Configuration Your Launcher
You can modify ""att_tabitems.xml" at your PC by using Notepad. After the modification is done connect your PDA with Act and copy "att_tabitems.xml" file into your PDA "\Windows" Folder. The new configuration will work. (No need to turn off TF3D or make a soft-reset)
Please report your test results with your phone configuration. If it works without any prb, then we can share this great Showaco add-in as an manila application
Although I am not a expert like Showaco , please find my answers that may help you
koolvirgo said:
Thanks Showaco.....Great work indeed !!
- I'm not sure which files I need to replace.
Click to expand...
Click to collapse
I try to explain what I have done. I take all the files from Showaco, except "26948339_manila" file and then modify it according to guide. Actually if you check your phone manila files, you will find only 3 files (26948339_manila,61f866ab_manila,7564a2d6_manila).
Please check all the files supplied by Showaco with your phone. Take the original copies into your PC. And then give a try
Also you can use my CAB file which has Uninstall facility. If it works for you, then no prb. Otherwise, you can uninstall and give a try by yourself
koolvirgo said:
- Is your solution specific to ATT ? I use an unlocked version with original 1.93 ROM.
Click to expand...
Click to collapse
No. It works for my Diamond unlocked ver with Original/Official Rom 1.35, Manila TF3D 1.0.1630.15, without any themes installed.
koolvirgo said:
- I don't have any themes installed....I hope that shouldn't be a deterrent though.
Click to expand...
Click to collapse
No theme needed. It works for me without any theme used.
I tried the cab version, with rom 2.03 greek. It totally screw up my phone.. The new tab was added but language went to english , softkey was gone, telephone provider changed, and many other. I uninstalled but some problems still remain so i need format .
sosimple said:
I tried the cab version, with rom 2.03 greek. It totally screw up my phone.. The new tab was added but language went to english , softkey was gone, telephone provider changed, and many other. I uninstalled but some problems still remain so i need format .
Click to expand...
Click to collapse
Sorry Sosimple
I really do not want to get you trouble like that. I was trying to help some guys who are not so familiar with manila files like me
May be it is because of your language is not English.
Sorry again
mkucuksari said:
Sorry Sosimple
I really do not want to get you trouble like that. I was trying to help some guys who are not so familiar with manila files like me
May be it is because of your language is not English.
Sorry again
Click to expand...
Click to collapse
Νo problem man. When i tried i knew there was a risk . I write it for others to know that there is a risk. After uninstalled everything went back to normal except of the icons of manila . All the icons looks like 2 times. I dont know how to describe it .When you move your finger to go from the one icon to other, the next icon (to which you move your finger) shows before you go to it. Does anyone have an idea if i can restore that?
Thanks,
I tried and the manila files of showaco and it works ok ,but i still have this problem..
The key in registry for programm tab shortcuts are here:
HKLM\Software\HTC\Manila\ProgramLauncher
Originally it has keys from 0 to 17 which respond to respective shortcuts. Adding new equal to adding new shortcut. .
For example:
HKLM\Software\HTC\Manila\ProgramLauncher\0
(ab)DispName Bubble Breaker
(ab)IconPath
(dw)IsReadOnly 0
(ab)Path \Windows\Main Menu\Games\Bubble Breaker.lnk
ab - string parametrs
dw - dword
If you add new one, for example
HKLM\Software\HTC\Manila\ProgramLauncher\20
(ab)DispName
(ab)IconPath
(dw)IsReadOnly 0
(ab)Path
You will be able to see one more empty space for icon on program launcher tab.
If you set the parametr (dw)IsReadOnly to 1 you won't be able to remove the shortcut from program launcher tab (you would nee to change parametr back to 0 in registry first).
MrLAG said:
The key in registry for programm tab shortcuts are here:
HKLM\Software\HTC\Manila\ProgramLauncher
Originally it has keys from 0 to 17 which respond to respective shortcuts. Adding new equal to adding new shortcut. .
For example:
HKLM\Software\HTC\Manila\ProgramLauncher\0
(ab)DispName Bubble Breaker
(ab)IconPath
(dw)IsReadOnly 0
(ab)Path \Windows\Main Menu\Games\Bubble Breaker.lnk
ab - string parametrs
dw - dword
If you add new one, for example
HKLM\Software\HTC\Manila\ProgramLauncher\20
(ab)DispName
(ab)IconPath
(dw)IsReadOnly 0
(ab)Path
You will be able to see one more empty space for icon on program launcher tab.
If you set the parametr (dw)IsReadOnly to 1 you won't be able to remove the shortcut from program launcher tab (you would nee to change parametr back to 0 in registry first).
Click to expand...
Click to collapse
Thanks but, i tried it and, i found out that you can ad as many empty tab shortcuts, but when you click to one of them to ad a shortcut for a program, after you have ad 18 shortcuts , you cant ad another one. If you find how to solve this it would be amazing ..
anyone find how to ad more than 18 items?
I get that there are 18 spots to add shortcuts but half of myne are filled with pre-set programs that came with the phone. When I try to delete them they have a little padlock on the corner of them and I can not delete from there.
Anyone know how to delete these? Someplace in the system folders there has to be a way...
That is correct, i have the same problem.
I have 18 quick url's, and i can add a new link. What happens though is the following:
x x x
x x x
etc.
x x y
z
"x" == link to an application (or other if applicable)
"y" == 18th "n"
"z" == button to add lnk
the y is the 18th lnk, the z is the button containing the "+" that makes it possible to add a nineteenth lnk.
The problem is that clicking "z" opens the correct menu, but after selecting a program, the icon remains empty (a standard black/gray icon with rounded edges and _no_plus in in) and clicking the button doesn't trigger an action as far as i've experienced it. There is however created a new icon with a "+" in it, resulting in:
n n n
n n n
etc.
n n m
o p
"n" == link to an application (or other if applicable)
"m" == 18th "n"
"o" == button with no content, clicking has no effect
"p" == button to add lnk
In this situation "m" is the 18th lnk, o is number 19, a lnk with no content, a black/gray button with rounded edges containing no icon. "p" Is the 20th icon, black/gray, rounded edges containing a plus.
Clicking icon "p" results in "p" turning into another "o" and an additional icon which acts as "p" did previously:
n n n
n n n
etc.
n n m
o o p
"n" == link to an application (or other if applicable)
"m" == 18th "n"
"o" == button with no content, clicking has no effect
"p" == button to add lnk
It is 1.20AM in the netherlands now, i've had some booze but i hope i've explained the problem good enough.
edit: i forgot to mention that i am wondering too how to add a 19th lnk, new buttons get added but the don't give any desired response.
1-what is ROM ?
2-if it put tf3d rom or another it will delete all files in the system ( like hard reset ) ?
3-is tf3d is like a panel ( spb mobile shell ) or will delete windows mobile system?
4-what is GeoTagging in camera ?
thanks
From what ive gathered by using roms my self... i have found the following:
1. What is a rom?
it is basically the thing that make the user interface look the way it looks. The default windows today panel is the default rom which the phone comes with. TF3D rom will replace that and make it look like a HTC Touch HD. you can install it as a panel by following this link-
http://forum.xda-developers.com/showthread.php?t=441439&highlight=tf3d+panel
Download TouchFlo3D on Xperia X1 cab and TouchFlo3D as Panel Installer Installer.
Install TF3d first, softreset, then go to settings, today, items and untick every thing. then soft reset.
Now install TF3d panel installer. soft reset. then just choose the panelas younormally would.
2. A rom will edit certain windows files to make it look and behave in a different way, but it would still be the windows interface. if you install another rom, it will erase all files on phone. and replace certain windows files.
3. see q 1
4. Dont know what geo tagging is??
thanks alot
but when i install the tochflo 3d beta 3 and made everything then when i press on the panel it writes to me loading in a white screen and notheing occure ??
in order to sort the icons in the program tab (pressing the windows symbol under manila) i deleted a few of the icons, eg. 'settings'. now i can not add them anymore since they are not shown if i choose add..
how can this be done?
thanks.
gr8 said:
in order to sort the icons in the program tab (pressing the windows symbol under manila) i deleted a few of the icons, eg. 'settings'. now i can not add them anymore since they are not shown if i choose add..
how can this be done?
thanks.
Click to expand...
Click to collapse
..do a hard reset..
Re-install the missing programs.
both answers are wrong.
i found the solution, just install the following cab and the start-program display is set back to standard!
does this cab do anything else but repairing the start-display? I don't want to mess up any other settings of my system which is a 1.40.162.2 (49069) GER Vodafone
gr8 said:
both answers are wrong.
i found the solution, just install the following cab and the start-program display is set back to standard!
Click to expand...
Click to collapse
Hi all,
I have downloaded few tweaks & was trying those. I found that the phone is quite fast. But when I found that there is no SETTINGS menu available I was frustrated. I dunno exactly when it got deleted. How can I get it back to start menu? Can anyone let me know if any registry values to be entered to enabling it again? I believe that people here will help me out definitely. Is there any other way which from which i can restore the settings in start menu?
Thanks to you all in advance...
Waiting reply..... Please help me to get rid of this problem...
Mandar M. Oke.
Are we speaking about "cooking development" or simply you installed some tweaks in a downloaded custom rom?
Some minimum informations are required such:
_WM build
_which kind of tweaks did you make.
_a build log
Maybe u changed thé Hidesettings value to 1 instead of 0 if u use Manila ...
settings menu for >= WM5 <= WM 6.1
settings menu for >= WM5 <= WM 6.1
View Program Files; folderview.exe Unzip and put this file in you programs folder and you will be able to add it to htc home
View Settings; htcSettings.exe Unzip and put the file in you programs folder and you will be able to add it to htc home
WM6.5+ Settings Menu back via;
[APP] MySettings - easy access to ctrpnl items (old settings panel)
Have a nice day,
hi Friends,
Thanks for the help first of all... I have done few changes through SK Tools... n found this problem... I have WM6.1 build... The registry value is 0 only i have checked the same already... there is no htcsettings.exe available on my phone... also I have tried copying below given htcsettings.exe to program files, it didn't work.. i put it in windows folder too... but still unable to view settings in start menu....
Pls help
Though meant for WM6.5 it is also for previous phones
Though meant for WM6.5 it is also for previous phones with hidden system settings;
MySettings - easy access to control panel items (old settings panel)
http://forum.xda-developers.com/showthread.php?t=737689&highlight=mysettings
Did you check this link?
AND
My previous message contains both executables (both in their *.zip files);
folderview - http://forum.xda-developers.com/attachment.php?attachmentid=72770&d=1204003237
htcSettings - http://forum.xda-developers.com/attachment.php?attachmentid=102462&d=1217285749