Ever since updating to this ROM a strange behavior would occur intermittently. Normally when navigating, BOTH BUTTONS stay lit and function as they are supposed to. When the malfunction occurs only ONE BUTTON stays lit and the other button that is not lit behaves as if it is stuck; the only way to unstick the button is to sleep/wake the phone or hold the Power button and hit Home to escape. It may return to normal for awhile but will return eventually. Any suggestions?
I tried searching for the solution but could not find an answer.
I have already tried:
1. flashing back to stock JPY with ODIN with repartition; result-same intermittent problem
2. Flashing darky rom again: result-same intermittent problem
3. Clearing data and cache from both ROMS: result-same intermittent problem
Sent from my GT-I9000T using XDA App
There is another thread - Touch Screen Keys "Menu & Back Buttons" that sounds similar but it doesn't specify the exact symptoms I'm describing.
I'm beginning to think it's ROM related vs hardware since the problems with problematic touch keys on any thread I find always mention "Darky ROM" describing "when" the problems start occurring.
Sent from my GT-I9000 using XDA App
Darky problem why not ask Darky .
jje
This morning I flashed Darky 8.1-NoWipe. The problem still occurs intermittently, but recovery from problem is not quite as annoying; now I can get the "non-lit" button to get unstuck faster by hitting it a couple of times and pausing in between those times. This behavior further leads me to believe this is more of a firmware prob.
When I use SGS Tools and enter Touchscreen Firmware Version I get the following info:
Phone's TSP FW Version: 22
Part's TSP FW Version: 22
TSP threshhold: 40
Phone's Touch key FW Version: 0xa9
Part's Touch key FW Version: 0x4
Current Firmware:
Model: I9000T
PDA: I9000XXJPY
PHONE: I9000UGJL2 (problem occurs also with Darky stock JPY)
CSC: I9000OXAJPX
This behavior further leads me to believe this is more of a firmware prob.
Ever since updating to this ROM a strange behavior would occur intermittently.
Is that not the answer its the rom one of many many user problems with that rom .
Clean formatted phone with a stock rom .
jje
Hi, just to add
on my phone it reads
Phone's Touch key FW Version: 0xa9
Part's Touch key FW Version: 0xa9
Maybe hitting touch key FW update button will solve the problem
This is a hardware problem
My phone started doing this also...the return button would work sometimes and other times would go off and act as stuck! Firmware version did not help. It would do it on stock 2.2, even 2.2.1 or Darkys.
I have sent it back to Samsung for repair. They know of this issue. Call Samsung or go to your nearest Samsung repair center.
I'm not completely convinced it is a hardware problem.
I can return to a working unit if I re partition and go back to eclair. Also the symptoms improve from darky 8.0 to 8.1. I also pm'd a guy with a similar problem and he went back to eclair and finally to doc rom without the problem re occurring.
I'm not ruling out either but would like to continue to hear about other's experiences.
Did the rep who diagnosed your problem say what part failed exactly?
Sent from my GT-I9000 using XDA App
i made a thread about this like yesterday, but my problem was that my menu button would activate on its own. This is my second sgs from bell, and this one came with JL2 and was having that problem. I flashed seeARMS rom to see if it would go away, and it didnt. So what i did to fix my problem was to go to stock JL2 with odin, used sgstools to update the firmware of the touchkeys, and that worked fine. Reflashed seeARMS and it still works fine. So just go back to JL2, firmware upgrade, flash back to darky's and it hopefully it'll work.
I'm tempted to perform the touch screen firmware upgrade via sgstools but I read a thread where it actually broke one guy's keys and I don't want to worsen the problem.
How many out there have performed the touch screen firmware upgrade successfully? Better yet, how many of you had something go wrong with the touch screen firmware upgrade?
Sent from my GT-I9000 using XDA App
Guys just stick with Official stock rom 2.2.1 JPY.
It's the best firmware up-to-date. I've had my fair share of Custom roms. But I've found that this firmware, JPY is the most stable one yet. Custom roms f*up core apps like camera, email etc which later on won't work with Market apps like
Plus customs roms you have to update like twice a week!!! it gets really annoying...
120 + apps installed and no lag jPY ftw!!
My phone reads:
Phone's Touch key FW version: 0xa9
Part's Touch key FW version: 0xff
Currently on Darkys v8, trasigs kernel
PDA: XXJPY
PHONE: XXJPY
CSC: XAJPX
And mine is working without any problems m8, good luck
It doesnt make sense why firmware would do this to only one of the soft buttons!
If it was a firmware issue both the buttons would have the issue not just one!
On mine it was only the return button....i started having this issue after they replaced the main board due to bad internal SD card. I noticed once the phone warmed up it would do it. If I left it alone for a bit so the screen cooled down, it would be fine. So, heat was causing the issue. It was doing this on the stock firmware the phone came loaded with JL2 and Darkys 8.0.
I'm the one who wrote it broke my buttons when i tried updating. However, I also said that I flashed back to JL2 Bell Official, then updated the fw for the buttons and went back to Darky's and since then, my buttons have worked perfectly. Try that!
Short Version: Flash back to JL2 from Bell, update Phone's Touch key FW version, flash back to Darky. All is well.
//edit: Here's the post explaining how to update the Touch Key Firmware: http://forum.xda-developers.com/showthread.php?t=869492
I ended up flashing to the stock publicly official firmware for my device.
Since I have an I9000t, that meant jl1 firmware.
I then applied the touch key upgrade (that moved me to 0x5) and proceeded to move back to Darky's ROM 8.1. No button problems since.
Sent from my GT-I9000 using XDA App
dinged said:
I ended up flashing to the stock publicly official firmware for my device.
Since I have an I9000T, that meant jl1 firmware.
I then applied the touch key upgrade (that moved me to 0x5) and proceeded to move back to Darky's ROM 8.1. No button problems since.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I'm having the same issue and the only way to partially solve it is to restart the phone: it would work for a while but after that they would lock again
Phone bricked!!!!
Kewjoe said:
I'm the one who wrote it broke my buttons when i tried updating. However, I also said that I flashed back to JL2 Bell Official, then updated the fw for the buttons and went back to Darky's and since then, my buttons have worked perfectly. Try that!
Short Version: Flash back to JL2 from Bell, update Phone's Touch key FW version, flash back to Darky. All is well.
//edit: Here's the post explaining how to update the Touch Key Firmware: http://forum.xda-developers.com/showthread.php?t=869492
Click to expand...
Click to collapse
Well, I updated my I9000T with that I9000UGJL2 and after Odin ended, the phone stayed there with a black screen, as if it had no power!
I've tried every combination of buttons possible and it won't start up, not even show an error message or something!
What can I do?
Dan_Aykroyd said:
Well, I updated my I9000T with that I9000UGJL2 and after Odin ended, the phone stayed there with a black screen, as if it had no power!
I've tried every combination of buttons possible and it won't start up, not even show an error message or something!
What can I do?
Click to expand...
Click to collapse
Flashing is a whole other topic. Hopefully, you had 3 button recovery mode already working before you tried flashing. If you did, you can try the techniques posted on the forums to get into 3 button recovery mode to reflash such as:
1. Pulling battery. Hold power button.insert battery and try volume down + Home + Power
2. Buy a usb jig on ebay that will put your device in recovery download mode
3. Search for other topics on bricking your phone or getting into 3 button recovery.
Also, to answer your other question. The reason why I upgraded the touchscreen firmware with the stock rom such as jl1 instead of any of the nonofficial newer roms out there was simply because I read some stories where people lost complete touchscreen control if they performed the upgrade with the newer roms.
My philosophy is always to go stock official before performing touchscreen firmware upgrade since there aren't many ways to troubleshoot if something goes wrong.
Sent from my GT-I9000 using XDA App
Dan_Aykroyd said:
Hi
- Is JL1 the latest, official firmware for I9000T? I couldn't find it in SamFirmware.com, where did you get yet?
Click to expand...
Click to collapse
Do a search on xda and you should find a topic and link to official I9000t stock rom.
Sent from my GT-I9000 using XDA App
dinged said:
I'm tempted to perform the touch screen firmware upgrade via sgstools but I read a thread where it actually broke one guy's keys and I don't want to worsen the problem.
How many out there have performed the touch screen firmware upgrade successfully? Better yet, how many of you had something go wrong with the touch screen firmware upgrade?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I've tried this on my wave and SGS the version of the touchscreen firmware didnt change but it did say it was successful
Related
Hello guys. I just had an unexpected problem. i finally managed to install custom firmware (miui to be exact) and i have A BIG PROBLEM!!!
When i press the power button, in order to lock in, my phone just shuts down!
I tried installing different versions of miui, I even installed CM to to test.. but problem still apears. This means i cant use any custom firmwares, except standart one.
I saw many comments, that people saying it works and etc. but mine lock in button just shuts down the whole phone.
The phone is stock bought, and what I did, is just installed CW on it.
P.S. I saw that one guy had the same problem, but with the u8800 not-pro model. He said that fixed firmware solved the problem. So what should i do? is it my phone's problem or custom firmware needs fix?
Huawei u8800pro
Android Version: 2.2.2
Kernel Version: 2.6.32.9-perf
Build number: 203026
Please, i beg you, help someone! Give atleast a tip or smth, I would appreciate any help.
furyen said:
Hello guys. I just had an unexpected problem. i finally managed to install custom firmware (miui to be exact) and i have A BIG PROBLEM!!!
When i press the power button, in order to lock in, my phone just shuts down!
I tried installing different versions of miui, I even installed CM to to test.. but problem still apears. This means i cant use any custom firmwares, except standart one.
I saw many comments, that people saying it works and etc. but mine lock in button just shuts down the whole phone.
The phone is stock bought, and what I did, is just installed CW on it.
P.S. I saw that one guy had the same problem, but with the u8800 not-pro model. He said that fixed firmware solved the problem. So what should i do? is it my phone's problem or custom firmware needs fix?
Huawei u8800pro
Android Version: 2.2.2
Kernel Version: 2.6.32.9-perf
Build number: 203026
Please, i beg you, help someone! Give atleast a tip or smth, I would appreciate any help.
Click to expand...
Click to collapse
oh, sorry, bad me. posted it in the wrong place. got lost in the website. sorry again.
Return to original froyo rom
Update to stock gingerbread b512 rom
Then install miui cm7 etc....
hi, I have an i9505 which I recently restored to stock (I previously had cm12.1). I flashed germany 4.4.2 kitkat and it worked fine.
I did all the updates using OTA, which at the end updates the phone to 5.0.1. Now I have the latest version (XXUHOH2), but I noticed that the back button doesn't work anymore, it doesn't even light up when I press it. The menu button works fine instead. I factory restored the phone through official recovery but it didn't change anything. Is it possible that the back button suddenly stopped working after I updated to the latest version because of an hardware failure, or is it a software problem? The phone hasn't dropped off the table once, and even with the first lollipop update the button worked.
i solved this issue by installing another firmware (XYHOE1)... it seems that my phone doesn't like the german one
Hi. I am having the same issue. I got the OTA update today and 5.0.1 was successfully installed on my phone. However, after the reboot, the back button stopped working and wont even light up. Is there any workaround aside from installing that firmware that you mentioned?
Will surely appreciate your response.
I haven't found a workaround, i tried both normal and black edition OH2 but the issue remains the same... however I flashed a custom firmware (and thus keeping OH2 bootloader and modems) and it works perfectly... so I think it's a bug found in OH2 firmwares which happens in some phones... flashing previous version of any firmware should fix the issue.
mIRChele said:
i solved this issue by installing another firmware (XYHOE1)... it seems that my phone doesn't like the german one
Click to expand...
Click to collapse
Can you give us a link for that firmware? I can't find that firmware anywhere. Thanks!
The latest firmware official for Gt-i9505 Germany (DBT) is this ONE.
mIRChele said:
hi, I have an i9505 which I recently restored to stock (I previously had cm12.1). I flashed germany 4.4.2 kitkat and it worked fine.
I did all the updates using OTA, which at the end updates the phone to 5.0.1. Now I have the latest version (XXUHOH2), but I noticed that the back button doesn't work anymore, it doesn't even light up when I press it. The menu button works fine instead. I factory restored the phone through official recovery but it didn't change anything. Is it possible that the back button suddenly stopped working after I updated to the latest version because of an hardware failure, or is it a software problem? The phone hasn't dropped off the table once, and even with the first lollipop update the button worked.
Click to expand...
Click to collapse
Please help me. I'm experiencing the same issue. I updated my phone to OH2 and after it finished updating, my back and menu button stopped functioning. Then received another update (OJ2) via Kies3, hoping that it will solve the issue I encountered in OH2 but nothing has changed. And now I downgraded my phone to a previous version of Lollipop (OC6) and it still not working.
Before updating my phone, I know and I'm sure my back and menu buttons are working fine that moment and like you, I haven't dropped my phone since I bought it so I'm sure this isn't a hardware problem. :crying::crying: Please help me. A big THANKS! :good:
sharinganxyeah said:
Please help me. I'm experiencing the same issue. I updated my phone to OH2 and after it finished updating, my back and menu button stopped functioning. Then received another update (OJ2) via Kies3, hoping that it will solve the issue I encountered in OH2 but nothing has changed. And now I downgraded my phone to a previous version of Lollipop (OC6) and it still not working.
Before updating my phone, I know and I'm sure my back and menu buttons are working fine that moment and like you, I haven't dropped my phone since I bought it so I'm sure this isn't a hardware problem. :crying::crying: Please help me. A big THANKS! :good:
Click to expand...
Click to collapse
Same problem for me. i tried even a Pit reflesh and dowgrade.
Same thing happened to me. I did the upgrade today, 24th Nov 2015, to Android 5.0.1 - Baseband versionXXUHOJ2 and my menu and back keys are gone. Very infuriating! Will Samsung fix this, or do I have to spend hours of my own time?
I have found a workaround, not ideal but helps short term. Go to Settings > My Device >Accessibility >Dexterity and interaction. Then switch on the Assistant menu. That gives you a little pop up square - available all the time - with 12 buttons including BACK and MENU.
I'm having the same issue. I came back to Kit kat coz I'm tired of Lollipop :silly:
same prb with me...i just updated my s4 to 5.0.1 everything is working fine but the back n menu keys are not working plz give me a solution to this problem
same problem
i back to 4.4.2 stock rom but still not workin -_- help guys
Phone's Touch key FW version: 0x10
Part's Touch key FW version: 0x12
I'v got the same problem.. I update my i9505 and buttons not working.. i flash with other firmware but still not working. plz guys help me
I wrote to Samsung to explain the problem. They know about it. They answered that they will fix the problem in the next update. Relax guys
Joku1981 said:
I wrote to Samsung to explain the problem. They know about it. They answered that they will fix the problem in the next update. Relax guys
Click to expand...
Click to collapse
I'm just a little bit calm, but surely to update we must wait a long time
vanDurka said:
I'm just a little bit calm, but surely to update we must wait a long time
Click to expand...
Click to collapse
I'm not going to move of Android 4.4.2.
very thanks Joku1981 i wait for a update my button still not working
code *#2663#
before flashing and touch button key working :
Phone's Touch key FW version: 0x10
Part's Touch key FW version: 0x10
after flash a update 5.0.1 : touch button key not working.
Phone's Touch key FW version: 0x10
Part's Touch key FW version: 0x12
Joku1981 said:
I wrote to Samsung to explain the problem. They know about it. They answered that they will fix the problem in the next update. Relax guys
Click to expand...
Click to collapse
Joku1981 said:
I'm not going to move of Android 4.4.2.
Click to expand...
Click to collapse
I will try, and waiting for more informations
goodluck
Any updates or solutions as yet please?
I had a perfectly working Galaxy S4 (GT-I9505), then after a recent update was pushed out, the softkeys now do not function. Soooo frustrating...... my confidence in Samsungs' Updates are now dented, I shall seriously think twice about allowing any updates through.
A friend has an S4 (i9505) from Vodafone Spain (ATL), unlocked and using another operator microSIM (Jazztel). Last week, via OTA, she received the latest update available: http://www.sammobile.com/firmwares/download/59777/I9505XXUHOJ4_I9505VFRHOF3_ATL/
After installing that OTA update, the signal level is very low, even none inside buildings, etc. This was not happening before.
In addition, the 2 soft keys (on both sides of the Home button) are not responding anymore, not even lighting up.
The Home button works, so... I think that it's not a hardware problem. Too much coincidence that the update and that hypothetical hardware problem happened at the same time...
First I did was a total hard reset, to factory settings, etc. No success, both problems (signal and soft keys) were still there.
Second, I flashed ROM manually via Odin. I flashed latest PHE one, so no Vodafone bloatware anymore: http://www.sammobile.com/firmwares/download/59311/I9505XXUHOJ2_I9505YXXHOJ1_PHE/
No success, still the same. I then did again a hard reset to factory setting, with Wipes first... and nothing.
Next thing I will do (when i have the phone in my hands again) is flashing with Odin the previous PHE one, and crossing fingers: http://www.sammobile.com/firmwares/download/48153/I9505XXUHOE3_I9505PHEHOE1_PHE/
Anyone with the same problem? Any solution/suggestion?
Flashed next-to-last Stock ROM for PHE http://www.sammobile.com/firmwares/download/48153/I9505XXUHOE3_I9505PHEHOE1_PHE/ and no success
Then I flashed Base HOH2 (4files+PIT) with Odin and... nothing either.
No idea what to try next. Suggestions?
Same here, after OTA no menu/back buttons (neither backlight or functionality)
Current status:
- seems to affect quite a lot of people, there are more threads like this on various sites
*e.g. here, here, here
- happenning after both OTA or ODIN based update to latest 5.0.1 ROM (for me it was i9505XXUHOJ2)
My findings so far:
- NO rom change seems to fix this
- it seems that touch keys' FW is updated (physically on the chip) along with the update (to version 0x12)
- Touch key FW update in menu *#2663# not applicable as it says that it won't update - versions are the same (you can check the version of driver used by ROM and the actual FW in chip on this page)
NOTE. my girlfriend has the buttons working after successful update and has both in version 0x12
Conclusion:
- It seems that the FW flashing process of the touch keys controllers somehow failed => phone says that it's also ver. 0x12 (same as android driver) but it is probably corrupted
- Re-flashing of the chip could solve the problems, however there are problems with this:
NOTES.
Menu *#2663# won't let us do the flash because of the version check - Can we use ADB to force the update on a rooted phone? Does anybody know how?
There is a slight chance, that it'll be fixed if Samsung will release some newer update which updates also the keys' FW
Samsung could release a fix, that will flash this manually as a lot of people have problem with this
!EDIT:
I've found very similar problem + solution on the Vietnamese forum bellow (don't use the files as it's for different phone!):
- to sum it up - force downgrading the FW, the update again... (any ROM cook that could help?)
see here
regards,
J.
I completely agree with you. I also tried the *#2663# path, the phone also has 0x12 touch keys FW, and it doesn't let me reflash it, either. Don't know what FW was there before the OTA update.
I have been told about the first German 5.0.1 stock ROM: http://www.sammobile.com/firmwares/download/44821/I9505XXUHOB7_I9505OXAHOB7_DBT/ and also about the last 4.4.2 one: http://www.sammobile.com/firmwares/download/40046/I9505XXUGNK4_I9505OXAGNK4_DBT/
Maybe one of those... makes something again on the Touch Keys FW?
I couldn't try anymore bcs I gave the phone back to my friend (with accesibility touch keys on-screen)
HI, have you found a solution? My Italian S4 suffered the same bug after the same upgrade. I tried to contact samsung and they said I need to replace the screen because upgrading the firmware put the electronic under stress and they got broken. I don't believe them because too many people have the same problem + my screen is two days old! Please help me!
Same problem for my S4! how we can flash/reflash/downgrade soft touch fw?
Has anyone tried the first first German 5.0.1 stock ROM: http://www.sammobile.com/firmwares/d...05OXAHOB7_DBT/ or the last 4.4.2 one: http://www.sammobile.com/firmwares/d...05OXAGNK4_DBT/ ?
A friend of mine (another one) told me that he fixed it with German HOA7 one, and then updated again to latest with no problem: https://mega.nz/#!VwcgXSQC!uGAhPxEuRrl-luS3sw8JmoPnjP4ybxrlsY4XcfFaWKE
I can't try it myself bcs I gave back the S4 to the owner. If anyone tries, please leave here the results!
oiluj said:
Has anyone tried the first first German 5.0.1 stock ROM: http://www.sammobile.com/firmwares/d...05OXAHOB7_DBT/ or the last 4.4.2 one: http://www.sammobile.com/firmwares/d...05OXAGNK4_DBT/ ?
A friend of mine (another one) told me that he fixed it with German HOA7 one, and then updated again to latest with no problem: https://mega.nz/#!VwcgXSQC!uGAhPxEuRrl-luS3sw8JmoPnjP4ybxrlsY4XcfFaWKE
I can't try it myself bcs I gave back the S4 to the owner. If anyone tries, please leave here the results!
Click to expand...
Click to collapse
I've tried a lot of ROMs - 4.4.2, also older 5.0.1 with no result...
I haven't tried UHOA7 I've tried UHOB7 instead, so I'll probably give it the shot, but I can't imagine how it could fix this issue (maybe if it for some reason has the touch-cypress FW update forced...)
- I've seen that on some German forums reverting back helped, but it wasn't my case (+it didn't fix the problem for many others...)
As I've wrote before, they've created modified kernel (with forced touch key FW reflash - bypassed version check) for a little bit different phone on the Vietnamese forum (see the link in my previous post) and it seems that it would be quite easy for somebody who has some knowledge with kernel compilation... (it would just need small modification in the "if" condition of 1 kernel source file) I've tried to do some research, but it takes some time to understand the process of building the kernel and to figure out how to properly pack it again... Also the sources are a little bit different for i9505.
kosmodisk said:
I've tried a lot of ROMs - 4.4.2, also older 5.0.1 with no result...
I haven't tried UHOA7 I've tried UHOB7 instead, so I'll probably give it the shot, but I can't imagine how it could fix this issue (maybe if it for some reason has the touch-cypress FW update forced...)
- I've seen that on some German forums reverting back helped, but it wasn't my case (+it didn't fix the problem for many others...)
As I've wrote before, they've created modified kernel (with forced touch key FW reflash - bypassed version check) for a little bit different phone on the Vietnamese forum (see the link in my previous post) and it seems that it would be quite easy for somebody who has some knowledge with kernel compilation... (it would just need small modification in the "if" condition of 1 kernel source file) I've tried to do some research, but it takes some time to understand the process of building the kernel and to figure out how to properly pack it again... Also the sources are a little bit different for i9505.
Click to expand...
Click to collapse
No idea, another friend of mine (different than the one who gave me her "broken" i9505 for fixing), who had the same problem with his own i9505 told me that with the I9505XXUHOA7_OXAHOA7 he fixed it. And sent me the Mega link, as it's not on SamMobile (or I didn't find it): https://mega.nz/#!VwcgXSQC!uGAhPxEuRrl-luS3sw8JmoPnjP4ybxrlsY4XcfFaWKE
I couldn't try it by myself, because I gave back the "broken" i9505 I was trying to fix to her owner before I was told about HOA7.
U know a lot more about this than me. Maybe you can give a try to that HOA7 Mega link, and see if it really works, or if my friend was extremely extremely lucky, and still doesn't know it (and ofc, doesn't know what the hell fixed his phone, and how).
Anyway, if u decide to give a try to the I9505XXUHOA7_OXAHOA7 one, don't forget to come back to tell us if it worked or... nothing. I keep fingers crossed!!!
Oh, and ofc: THANK YOU!!!
oiluj said:
No idea, another friend of mine (different than the one who gave me her "broken" i9505 for fixing), who had the same problem with his own i9505 told me that with the I9505XXUHOA7_OXAHOA7 he fixed it. And sent me the Mega link, as it's not on SamMobile (or I didn't find it): https://mega.nz/#!VwcgXSQC!uGAhPxEuRrl-luS3sw8JmoPnjP4ybxrlsY4XcfFaWKE
I couldn't try it by myself, because I gave back the "broken" i9505 I was trying to fix to her owner before I was told about HOA7.
U know a lot more about this than me. Maybe you can give a try to that HOA7 Mega link, and see if it really works, or if my friend was extremely extremely lucky, and still doesn't know it (and ofc, doesn't know what the hell fixed his phone, and how).
Anyway, if u decide to give a try to the I9505XXUHOA7_OXAHOA7 one, don't forget to come back to tell us if it worked or... nothing. I keep fingers crossed!!!
Oh, and ofc: THANK YOU!!!
Click to expand...
Click to collapse
I got the problem but only the back button was not working. Did factory reset and it did not help.
Then i flashed I9505XXUHOA7_OXAHOA7 from your link with Odin 3.10 and YES!!! i can confirm it is working again So happy now.
It is my Moms Phone now and she loves it!!. I was unly helping her doing the OTA so she realy hated me and SAM for F****** up her phone.
This tread realy saved my ass
Can confirm this is happening to me as well. All firmwares starting from HOF2 seem to have this problem so if you encounter this, downgrading to a HOE/HOD firmware should correct this bug. The downside is that without a proper fix, you won't be able to update.
BUBA0071 said:
I got the problem but only the back button was not working. Did factory reset and it did not help.
Then i flashed I9505XXUHOA7_OXAHOA7 from your link with Odin 3.10 and YES!!! i can confirm it is working again So happy now.
It is my Moms Phone now and she loves it!!. I was unly helping her doing the OTA so she realy hated me and SAM for F****** up her phone.
This tread realy saved my ass
Click to expand...
Click to collapse
@kosmodisk, did u read that? have u tried I9505XXUHOA7_OXAHOA7 by urself? Ur conclusions?
@BUBA0071:
- Did u look before (and after) flashing HOA7 which FW had (and have now) the touch keys? Remember: *#2663#
- After flashing HOA7, did u update again to latest one? Did the update work well this time, and now u have latest version with touch leys working?
MoLoCEL said:
Can confirm this is happening to me as well. All firmwares starting from HOF2 seem to have this problem so if you encounter this, downgrading to a HOE/HOD firmware should correct this bug. The downside is that without a proper fix, you won't be able to update.
Click to expand...
Click to collapse
I tried with a HOE1 one and... didn't work. Couldn't try one even older, but HOE1 seems to keep the same problem.
the file is corrupted when i try to extract it ? any other files that i can try ? im having the same problem right now with my s4.. have been looking for quiet some times now, and this is my only hope, hope this way will works smoothly...
wild081 said:
the file is corrupted when i try to extract it ? any other files that i can try ? im having the same problem right now with my s4.. have been looking for quiet some times now, and this is my only hope, hope this way will works smoothly...
Click to expand...
Click to collapse
download it again
@oiluj
HOE3 works for me. Problems start from HOF onwards.
I have also tried flashing HOA7 DBT and upgrading. Problem persists. My touchkey firmware is 0x1a and won't update no matter what Firmware package I tried. Up to now i have tried: GNG2, GNI2, GNK4, HOA7, HOB7, HOD7.
I'm pretty sure a rom (custom or early kitkat/lollipop leaks) caused this, altough I never flashed the initial chinese leak.
MoLoCEL said:
[MENTION=3170873]I'm pretty sure a rom (custom or early kitkat/lollipop leaks) caused this, altough I never flashed the initial chinese leak.
Click to expand...
Click to collapse
The phone that that girl gave to me, for fixing... was completely in official status. Always official ROMs, and official OTA updates, from first minute. And the problem was caused by latest official OTA update available: http://www.sammobile.com/firmwares/download/59777/I9505XXUHOJ4_I9505VFRHOF3_ATL/
So the problem was not caused by any custom ROM or a not official one.
oiluj said:
@kosmodisk, did u read that? have u tried I9505XXUHOA7_OXAHOA7 by urself? Ur conclusions?
@BUBA0071:
- Did u look before (and after) flashing HOA7 which FW had (and have now) the touch keys? Remember: *#2663#
- After flashing HOA7, did u update again to latest one? Did the update work well this time, and now u have latest version with touch leys working?
I tried with a HOE1 one and... didn't work. Couldn't try one even older, but HOE1 seems to keep the same problem.
Click to expand...
Click to collapse
Hardware key firmware 0X12 parth 0X1a (when it was not working, dont know if it have changed after german firmware flash). I have not updated again, think my CSC is blocking. It stayed on NEE after update to German firmware.
It was NEE I9505XXUPOJ2 firmware that F***** up my Phone
BUBA0071 said:
Hardware key firmware 0X12 parth 0X1a (when it was not working, dont know if it have changed after german firmware flash). I have not updated again, think my CSC is blocking. It stayed on NEE after update to German firmware.
It was NEE I9505XXUPOJ2 firmware that F***** up my Phone
Click to expand...
Click to collapse
unfortunately I've tried I9505XXUHOA7_OXAHOA7 with no luck (even with repartition when flashing) - the buttons still don't respond
BUBA0071, I'd like to ask which custom ROM have you tried? It seems that your keys have FW of version 0x1a which should be newer than 0x12, so this could lead to some sollution. Was it some cyanogen mod or MIUI?
thx
kosmodisk said:
unfortunately I've tried I9505XXUHOA7_OXAHOA7 with no luck (even with repartition when flashing) - the buttons still don't respond
BUBA0071, I'd like to ask which custom ROM have you tried? It seems that your keys have FW of version 0x1a which should be newer than 0x12, so this could lead to some sollution. Was it some cyanogen mod or MIUI?
thx
Click to expand...
Click to collapse
Wups it have been some time since it was custum, but in any cace it must have been some of the first lollipop roms. I gave to my mom 13 feb 2015 and i did a lot of flashing before that, i think one of the roms i tryed was Project Chaos. but also i tryed all the google editition roms for i9505 and cyanogen.
but when it whent back to stock it i used PDA I9505XXUHOD7 CSC I9505NEEHOD2 NEE firmware
I've got a question. When you flash the HOA7 file from the Mega link, do you use only the AP file, or you use AP,BL,CP, CSC and PIT files?
I'm gonna try to fix my S4 but i'm not sure about the right process I should follow.
Thank you!
My galaxy s4 i9500 had kitkat installed and it was updated to lollipop last year. Thereafter in september while installing ota update phone restarted and suddenly back and menu key were gone blank.
Trued every possible trouble shoot available on xda and other sites to no avail.
1. Installed Stock kitkat again.
2. Installed other lollipop firmwares.
3. Installed cyanogenmod 12.1
4. Wiped phone many times using twrp.
5. Change of strip cable also did not work.
6. *#2663# menu shows blank in place of touch key firmware version/update.
Please if somebody could only figure out what has actually turned the phone like this..even if this is not solvable..at least i should know what went wrong..
Thanks.
There is a similar problem with the GT-I9505 models too.
It's probably related to a faulty update or something.
I don't know if there is anything you can do without professional help.
What you have to do is: you have to force the touch key firmware to update somehow.
GDReaper said:
There is a similar problem with the GT-I9505 models too.
It's probably related to a faulty update or something.
I don't know if there is anything you can do without professional help.
What you have to do is: you have to force the touch key firmware to update somehow.
Click to expand...
Click to collapse
Dear I have been looking for everywhere regarding force install touch key firmware but could not find any solution or patch.
Chupshah said:
Dear I have been looking for everywhere regarding force install touch key firmware but could not find any solution or patch.
Click to expand...
Click to collapse
There was a thread around here that might have some things you could try. I can't find it, but you can do a forum search.
It was for the GT-I9505, but some of it can probably be applied to yours.
Otherwise you might need the help of a professional since they have the necessary tools.
GDReaper said:
There was a thread around here that might have some things you could try. I can't find it, but you can do a forum search.
It was for the GT-I9505, but some of it can probably be applied to yours.
Otherwise you might need the help of a professional since they have the necessary tools.
Click to expand...
Click to collapse
I have gone through that thread it is about incompatible Touch Key and Part Key Firmware Version. I have already tried those fixes but no success. Even in that thread issue is not solved yet.
In my case that dialog box for touch key and parts key firmware update doesnot appear in *#2663#. :crying:
After updating to Android 6.0.1, the phone is randomly losing mobile and gps signal. It happens about 30-40 times a day, especially when moving around, like driving . Almost every time I look at my phone, I see "No service, network not found" or "gps lost" messages. After about 10 seconds, the signal comes back and everything is ok again. Very annoying and impossible to use navigation apps, like Waze and Google Maps. I have made a soft reset, a hard reset, wiped all data and cleared the phone cache, checked and cleaned the Sim card. Nothing helps. Before update the phone worked brilliantly. Also noticed, that the signal won't drop when using wifi, the problem occurs only when data connection is on. And I'm not the only one, I have 2 friends with the same phone and the same problem. Looks like a software issue. Can somebody help?
PS. I'm from Estonia, and the software version is G901FXXU1CPE1/G901FBAL1CPE1
Thank you in advance...
Hi mate,
I Have the same device although mine uses a custom ROM but the problem I experienced was exactly like yours
Samsung released a new issue of the 6.0.1 for our phone, PDA G901FXXU1CPF6 CSC G901FPHN1CPF2 you can login to the sammobile site and download it
As I said above I have a custom ROM so I only flashed the modem firmware from that release and worked fine after that!
Hope that will help you!
Thanks for your response! But I'm using a totally stock phone and I see, that this firmware is for Netherlands. Does it work on my phone or I have to wait until the Baltic version is released?
MirandoKersman said:
Thanks for your response! But I'm using a totally stock phone and I see, that this firmware is for Netherlands. Does it work on my phone or I have to wait until the Baltic version is released?
Click to expand...
Click to collapse
Hello,
I don't see any reason why it wouldn't work but just in case make a note of your Access point name settings in the mobile networks tab just to make sure that everything is the same after you flash the new release .
If you follow the steps as described in the sammobile site you won't have any problems.
What I have noticed however is that after I flashed the new modem firmware the mobile hotspot does not work anymore but this has to do with my custom ROM.
It worth trying though the performance of the phone after that is exceptional and the signal strength is higher than before and most importantly, doesn't crash anymore..
Let me know if you need help and keep me posted about your results!
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Randi said:
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Click to expand...
Click to collapse
Baseband:
G901FXXU1CPE1, I have a totally stock phone with the latest official firmware.
Latest official firmware from where? ("latest" is region dependent)
Ok, the cph firmware updated the baseband to cph, on my side it's only been a while 14 hrs since flashing but it seems the signal problem is finally fixed
Randi said:
i had that ROM for a while, didnt help in my case, still same issue. I'm currently on XXU1CPG3 with which the issue still persists, gonna try flashing the new TPD CSC ROM (currently the newest) ROM Version CPH9. My baseband is still CPE1, which do you guys have?
Click to expand...
Click to collapse
From what I understand it doesn't matter which ROM you are using the baseband is the one that causing this problem..
As I said I have a custom ROM and when I had the CPE1 baseband then I had all these problems.
If you flashed the ROM and your baseband is still CPE1 then something did not go per plan I think..
After flashing ONLY the modem firmware from the CPF6 release to my SMG901F is reported that the baseband version is CPG2 however..
This version works for sure..
I might try the CPH9 release now to see if the issues i have with the mobile hotspot will be solved
George A. said:
From what I understand it doesn't matter which ROM you are using the baseband is the one that causing this problem..
As I said I have a custom ROM and when I had the CPE1 baseband then I had all these problems.
If you flashed the ROM and your baseband is still CPE1 then something did not go per plan I think..
After flashing ONLY the modem firmware from the CPF6 release to my SMG901F is reported that the baseband version is CPG2 however..
This version works for sure..
I might try the CPH9 release now to see if the issues i have with the mobile hotspot will be solved
Click to expand...
Click to collapse
I'll try to install that CPH9 release too. Let's see what happens, because I have tried everything else.
To me it seems, that this CPE1 version is having problems with switching between network modes. I checked, that in Settings- Mobile networks- Network mode is set to LTE/3G/2G (automatic connect), but I haven't seen H+, H or Edge symbols on top of the screen. Only 4G/4G+ or no reception at all. Like it's locked in 4G network or something. And sometimes when there is no 4G network coverage, there is also no signal. But that is just my logic...
Ok, I flashed the latest CPH9 firmware and my baseband changed to CPH3. CSC Country turned to Netherlands instead of Baltic. And it seems that the issue is fixed!
I made a little test, I went to the cellar to get bad 4G reception and instead of showing No Service, 4G turned to H without losing the cell signal. Let's wait and see...
Thank you guys a lot for your help! :good:
Hi
1) I have the latest PHN version for SM-G901f stock& rooted. I see the TPD version, will it have dutch language if i flash it ( without wipe anything) in ODIN?
2) What does TPD stand for anyway?
I want to do this because i see TPD has latest security_patch sept 1
With rooted Phone there is no way (as far as i know (3) ) to get security updates without getting the message it as screenshot given under here....
I can confirm that the issue has been fixed for me as well! ****ing finally! :cyclops:
Btw it will not switch to Dutch
MirandoKersman said:
After updating to Android 6.0.1, the phone is randomly losing mobile and gps signal. It happens about 30-40 times a day, especially when moving around, like driving . Almost every time I look at my phone, I see "No service, network not found" or "gps lost" messages. After about 10 seconds, the signal comes back and everything is ok again. I have made a soft reset, a hard reset, wiped all data and cleared the phone cache, checked and cleaned the Sim card....
PS. I'm from Estonia, and the software version is G901FXXU1CPE1/G901FBAL1CPE1
Thank you in advance...
Click to expand...
Click to collapse
I'm from Indonesia and buy used g901f from singapure,
I have same problem with marsmallow latest update too
My software version is G901FXXU1CPH3/G901FOLB1CPH1/G901FXXU1CPH1
How to fix it? Step by step..
Thank you before..
*) sorry for my bad english
---------- Post added at 01:43 AM ---------- Previous post was at 01:36 AM ----------
Randi said:
I can confirm that the issue has been fixed for me as well! ****ing finally! :cyclops:
Btw it will not switch to Dutch
Click to expand...
Click to collapse
Pliss help me with step to fix it
Hello! It seems all the firmwares ending with CPE1/CPH1 are problematic. You can try some other firmware from http://www.sammobile.com/firmwares/database/SM-G901F/
Select the firmware what seems best for you, don't select the operator-based ones, like vodafone etc. If you click on the firmware and scroll the page down, you will see step-by-step instructions how to install it. Good luck!
Ok but i can't found latest country band FW have same with indonesia network (except FW country singapure now i using it)
So i'll try to download FW update 2016-09-03
Country Unknown
Build date Tue, 13 Sep 2016
Security Patch Level 2016-09-01
Product code ORL
PDA G901FXXS1CPI4
CSC G901FORL1CPF1